The required standards in the field of Electrical Equipment of Road Vehicle Systems are given below. Our company performs the test, inspection and certification of all the following standards with the latest technology devices quickly and reliably.
TS EN ISO 8092-1 Road vehicles - Connections for surface electrical installation - Single pole connection tables - Dimensions and special requirements
TS EN ISO 8092-3 Road vehicles - Connections for surface electrical installation accessories - Part 3: Cards for multipolar connections - Dimensions and specific features
TS EN ISO 8092-4 Road vehicles - Connections for surface electrical installation accessories - Part 4: Pins for single and multi-pole connections - Dimensions and special requirements
TS EN ISO 8092-1 Road vehicles - Electrical wiring harness on vehicle section 1: Single pole terminals - Dimensions and specific features
TS EN ISO 8092-3 Road vehicles - Electrical wiring harness on the vehicle section 3: Flat ends for multipolar connections - Dimensions and special requirements
TS EN ISO 8092-4 Road vehicles - Electrical wiring on vehicles - Part 4: Single and multi-pole connecting pins - Dimensions and specific features
tst ISO 6722 Road vehicles - 60 v and 600 v single core cables - Dimensions, test methods and rules
TS EN ISO 8092-2 Road vehicles - Electrical wiring on vehicles - Part 2: Definitions, test methods and general performance characteristics
TS 4348 General purpose electrical cables for armored and other military vehicles - General specifications
tst ISO 7637-1 Road vehicles - Electrical disturbances due to transmission and coupling - Part 1: Definitions and general considerations
TS ISO 7637-2 Road vehicles - Electrical disturbances due to transmission and coupling - Part 2: Transmission of electrical transient regime only along feed lines
tst ISO 7637-3 Road vehicles - Electrical disturbances due to transmission and coupling - Part 3: Electrical transient regime transmission via capacitive and inductive coupling via lines except feed lines
TS EN 1648-1 Temporary residence vehicles - 12 et al.a very low voltage electrical installations - Part 1: Caravans
TS EN 1648-2 Temporary residence vehicles - Very low voltage electrical installations in 12 v - Part 2: Motorhomes
tst ISO 6722-1 Road vehicles - 60 v and 600 v single core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
tst ISO 6722-2 Road vehicles - 60 v and 600 v single core cables - Part 2: Dimensions, test methods and requirements for aluminum conductor cables
tst ISO 6722-1 / A1 Road vehicles - 60 v and 600 v single core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
TS EN 62196-2 / A11 Plugs, sockets, vehicle connectors and vehicle inlets - Filling of electric vehicles - Part 2: Dimensional compatibility and interchangeability rules for auxiliary equipment with AA contacts rod and pipe
TS EN 1648-1 Temporary residence vehicles - 12 et al.a very low voltage electrical installations - Part 1: Caravans
TS EN 1648-2 Temporary residence vehicles - Very low voltage electrical installations in 12 V - Part 2: Motorhomes
Alcohol interlocks - Test methods and performance guidelines - Part 50436: Devices for alcoholic driving deterrent programs - Part 1-1
Alcohol interlocks - Test methods and performance guidelines - Section 50436: Devices for general protective use
TS EN 62485-3 Safety requirements for secondary accumulators and accumulator installations - Part 3: Draw frame accumulators
TS EN 62321-2 Determination of specific substances in electrotechnical products - Part 2: Dismantling, separation and mechanical sample preparation
TS EN 62321-3-1 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Determination of lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
TS ISO 6722-1 Road vehicles - 60 v and 600 v single core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
TS ISO 6722-1 / A1 Road vehicles - 60 v and 600 v single core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
TS ISO 6722-2 Road vehicles - 60 v and 600 v single core cables - Part 2: Dimensions, test methods and requirements for aluminum conductor cables
TS ISO 3808 Road vehicles - Unshielded high voltage ignition cables - General specifications, test methods and rules
TS EN 62321-4 Determination of specific substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
TS EN 62321-5 Determination of specific substances in electrotechnical products - Part 5: AAS, AFS, ICP-OES and ICP-MS with cadmium, lead and chromium in metals and cadmium and lead in metals
TS EN 62321-3-2 Determination of specific substances in electrotechnical products - Part 3-2: Screening - Combustion by total bromine in polymers and electronics - Ion chromatography
Alcohol interlocks - Test methods and performance guidelines - Section 50436: Devices with a nozzle for general precautions and for breathing in alcohol
TS EN 50436-6 Alcohol interlocks - Test methods and performance guidelines - Part 6: Data security
TS ISO 11451-2 Road vehicles - Test methods for electrical disturbances caused by electromagnetic energy emitted in narrowband - part 2: Sources of emissions outside vehicles
TS ISO 11451-1 Road vehicles - Vehicle test methods for electrical disturbances caused by electromagnetic energy emitted in narrow bands - Part 1: General aspects and terminology
TS ISO 4009 Towing vehicles - Installation of electrical connections on the rear plates
TS EN 62321-6 Determination of specific substances in electrotechnical products - Part 6: Polypromised biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry
TS EN 62321-1 Determination of specific substances in electrotechnical products - Part 1: Introduction and overview
TS 10178 Electrical couplings between tractor and trailers (used for military purposes)
TS ISO 11452-2 Road vehicles - Component test methods for electrical disturbances caused by electromagnetic energy emitted by narrowband radiation - Part 2: Absorber-coated armored housing
TS EN 62485-3 Safety requirements for secondary accumulators and accumulator installations - Part 3: Draw frame accumulators
TS EN 62321-2 Determination of specific substances in electrotechnical products - Part 2: Dismantling, separation and mechanical sample preparation
TS EN 62321-3-1 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Determination of lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
TS ISO 6722-1 Road vehicles - 60 v and 600 v single core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
TS ISO 6722-1 / A1 Road vehicles - 60 v and 600 v single core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
TS ISO 6722-2 Road vehicles - 60 v and 600 v single core cables - Part 2: Dimensions, test methods and requirements for aluminum conductor cables
TS ISO 3808 Road vehicles - Unshielded high voltage ignition cables - General specifications, test methods and rules
TS EN 62321-4 Determination of specific substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
TS EN 62321-5 Determination of specific substances in electrotechnical products - Part 5: AAS, AFS, ICP-OES and ICP-MS with cadmium, lead and chromium in metals and cadmium and lead in metals
TS EN 62321-3-2 Determination of specific substances in electrotechnical products - Part 3-2: Screening - Combustion by total bromine in polymers and electronics - Ion chromatography
Alcohol interlocks - Test methods and performance guidelines - Section 50436: Devices with a nozzle for general precautions and for breathing in alcohol
TS EN 50436-6 Alcohol interlocks - Test methods and performance guidelines - Part 6: Data security
TS ISO 11451-2 Road vehicles - Test methods for electrical disturbances caused by electromagnetic energy emitted in narrowband - part 2: Sources of emissions outside vehicles
TS ISO 11451-1 Road vehicles - Vehicle test methods for electrical disturbances caused by electromagnetic energy emitted in narrow bands - Part 1: General aspects and terminology
TS ISO 4009 Towing vehicles - Installation of electrical connections on the rear plates
TS EN 62321-6 Determination of specific substances in electrotechnical products - Part 6: Polypromised biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry
TS EN 62321-1 Determination of specific substances in electrotechnical products - Part 1: Introduction and overview
TS 10178 Electrical couplings between tractor and trailers (used for military purposes)
TS ISO 11452-2 Road vehicles - Component test methods for electrical disturbances caused by electromagnetic energy emitted by narrowband radiation - Part 2: Absorber-coated armored housing
(EC) No 661 / 2009 Regulation of the European Parliament and of the Council of 13 dated June 2009 on the type-approval requirements for the general safety of motor vehicles and their trailers and the system, component and separate technical units designed for them
TS ISO 2261 Internal combustion engines with reciprocating movement - Hand operated controls - Standard direction of movement
TS ISO 1185 Road vehicles-24 electrical connections between the towing and towing vehicles operating at rated voltage-Type 24 n-Normal
TS 1246 Names and symbols used to specify textile yarns
TS ISO 3731 Road vehicles - Connectors for the electrical connection of towing and towing vehicles - 24 s type 24 pole connector (complement) for vehicles operating at rated voltage 7 v
TS ISO 3732 Road vehicles - Connectors for electrical connection of towing and towing vehicles - 12 s-type 12 pole connectors for vehicles operating at rated voltage 7 v (complementary)
TS ISO 4091 Road vehicles - Electrical fittings between towing and towing vehicles - Definitions, tests and specifications
TS ISO 4091 / T1 Road vehicles - Electrical fittings between towing and towing vehicles - Definitions, tests and specifications
TS 4466 Windscreen wiper motors (electric) used in road vehicles
TS 4466 / T1 Windscreen wiper motors (electric) used in road vehicles
TS ISO 7637-1 Road vehicles - Electrical disturbances resulting from transmission and coupling - Part 1: Definitions and general considerations
TS ISO 7637-2 Road vehicles - Electrical disturbances due to transmission and coupling - Part 2: Transmission of electrical transient regime only along feed lines
TS ISO 7637-3 Road vehicles - Electrical disturbances due to transmission and coupling - Part 3: Transient electrical conduction via capacitive and inductive coupling via lines except feed lines
TS 7659 Road vehicles - Electrical connections between traction and traction vehicles operating at rated voltage 6 or 12 volts - Type 12 n, normal
TS EN ISO 8092-2 Road vehicles - Electrical wiring on vehicles - part 2: Definitions, test methods and general performance characteristics
TS 10304 EN ISO 4165 Road vehicles - Electrical connections - Bipolar connection
TS ISO 16844-2 Road vehicles - Tachograph systems - Part 2: Electrical interface with recording unit
TS ISO 16844-1 Road vehicles - Tachograph systems - part 1: Electrical connectors
TS ISO 16844-3 Road vehicles - Tachograph systems - Part 3: Motion sensor interface
TS ISO 16844-4 Road vehicles - Tachograph systems - Part 4: Life interface
TS ISO 16844-5 Road vehicles - Tachograph systems - Part 5: Secure controller area network (CAN) interface
TS ISO 16844-6 Road vehicles - Tachograph systems - Part 6: Diagnostics
TS ISO 16844-7 Road vehicles - Tachograph systems - Part 7: Parameters
TS EN 62430 Conscious design of environmental conditions for electrical and electronic products
TSE-EEC / 72 / 245: 2000 Council regulation on motor vehicles motor vehicle radio interference (electromagnetic compatibility), the latest 89 / 491 / at and 95 / 54 / ec and 20 Regulation at
TSE EEC / 3821 / 85: 2001 / 3314 / 90, 3572 / 90, 3688 / 92, 2479 / 95, 1056 / 97 and 2135 / 98 are subject to the technical amendments (at) of the Council technical regulation 20 / 1985
TSE EEC 92 / 6: 2000 Motor vehicles 10 dated February 1992 and numbered 92 / 6 / at on the placement and use of speed limiting devices for certain classes of motor vehicles in the European Community