Paper Technology Standards

The papers we use at home and everywhere need to be arranged according to certain standards. All the standards required by paper technology are given below. We test, audit and certify all of the following standards.

TS 4839 ISO 5630-1 Paper and cardboard - Accelerated aging section 1: 105 Dry heat treatment at ° C

TS EN 645 Paper and cardboard - Food contact - Preparation of cold water extract

TS EN 647 Paper and cardboard - Food contact - Preparation of hot water extract

TS 1121 ISO 776 Pulp-Determination of acid-insoluble ash content

TS 4841 ISO 6587 Paper, cardboard and pulp-Determination of self conductivity in aqueous extracts

TS 4840 ISO 5637 Paper and corton-Determination of water absorbency after immersion

TS 7491 EN 27213 Pulp-Sampling for testing

TS 636 EN 20187 Paper, cardboard and pulp-Standard atmospheric conditions for tests and conditioning and conditioning of samples and observation of atmospheric conditions

TS 636 EN 20187 Paper, cardboard and pulp - Standard atmospheric conditions for experiments and conditioning and conditioning of samples and monitoring of atmospheric conditions

TS ISO 11093-1Paper and cardboard-axle pipe test section 1: Sampling

TS 5162 ISO 5626 Determination of paper-folding strength

TS 3121-1 ISO 1924-1 Determination of paper and cardboard-breaking properties section 1-Constant speed loading method

TS 5228-2 EN 234 Wall coverings in rolls

TS 5228-4 EN 266 Wall coverings-In rolls -Features of textile wall coverings

TS ISO 8787 Paper and cardboard-Capillary elevation determination-Klemm method

TS ISO 8791-1 Paper and cardboard - Determination of surface roughness (air leakage methods) - Part 1: General method

Determination of stock concentration

TS EN ISO 15755 Paper and cardboard - Determination of unwanted particles

TS ISO 9198 Paper, cardboard and pulp-Determination of water-soluble sulphates

TS ISO 15360-1 Recycled paper pulp-Evaluation of adhesives and plastics-Part 1: Visual inspection method

TS 635 EN ISO 186 Paper and cardboard - Sampling for average quality determination

TS ISO 11108 Information and documentation-Archiving paper-Persistence and durability

TS EN 12858 Paper - Printing and correspondence paper - Specifications for continuous paper

TS EN 14086 Paper and cardboard - Measurement of reflective brightness - 45º brightness with parallel beam, religion method

TS EN ISO 5263-1 Pulp - Wet fiber opening in the laboratory

TS EN ISO 5263-2 Pulp - Wet fiber opening in the laboratory - Part 2

TS EN 12498 Paper and cardboard - Food contact - Determination of cadmium, lead and chromium in aqueous extract

TS EN 648 Paper and cardboard - Food contact - Determination of color fastness in bleached paper and cardboard by providing fluorescence

TS EN ISO 1924-2 Paper and cardboard-Determination of breaking properties-Part 2-Constant speed drawing method

TS EN 1230-1 Paper and cardboard - Food contact - Sensory analysis - Part 1: Odor

TS EN ISO 12625-12 Soft tissue and paper products - Part 12: Determination of elongation strength of perforation lines - Calculation of puncture efficiency

TS EN 1010-2 + A1 Safety in machines - Safety rules for the design and construction of printing and paper converting machines - Part 2: Printing and lacquering machines, including pre-press machines

TS EN ISO 12625-8 Paper napkins and paper napkin products - Part 8: Water absorption time and water absorption capacity, basket dipping test method

TS EN ISO 12625-8 Paper napkin and paper napkin products - Part 8: Water absorption time and water absorption capacity, basket immersion test method

TS EN 1010-1 + A1: Safety in 2010 machines - Safety rules for the design and construction of printing and paper converting machines - Part 1: Common rules

TS EN ISO 7263 Corrugated cardboard - Determination of crush strength after grooving

ISO EN ISO 12625-1 Soft tissue and products - Part 1: General guide to terms (ISO 12625-1: 2011)

TS EN ISO 12625-1 Soft tissue and products - Part 1: General guide to terms "

TS EN ISO 15320 Pulp, paper and cardboard - Determination of pentachlorphenol in aqueous extract

TS EN ISO 534: 2011 Paper and cardboard - Determination of thickness, density and specific volume

TS EN 1034-3 Safety in machines - Safety rules for the design and construction of papermaking and finishing machines - Part 3: Coil winding, bobbin cutting and dimension cutting machines

TS ISO 11475 Paper and cardboard - CIE Whiteness, D65 / 10 ° (daylight outdoor)

TS EN 1034-26 Safety in machinery - Safety rules for the design and construction of papermaking and finishing machines - Part 26: Roll packaging machines

TS EN ISO 12625-12Soft thin paper and products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency

TS EN 1034-16 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 16: Machines for making paper and cardboard

TS EN 1034-8 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 8: Refinery plants

TS 5228-2 EN 234 / T1 Wall coverings - In rolls - Decorated later - Features

TS EN ISO 536 Paper and cardboard - Determination of weight

TS EN ISO 1924-2 Paper and cardboard - Determination of tensile properties - Part 2: Elongation at constant speed (20 mm / min)

TS EN 12497 Paper and cardboard - Food and paper contact - Determination of mercury in aqueous extract

TS EN 12498 Paper and cardboard - Food and paper contact - Determination of cadmium and lead in aqueous extract

TS EN ISO 15320 Pulp, paper and cardboard - Determination of Pentachlorophenol in aqueous extract

TS EN ISO 287 Paper and cardboard - Determination of moisture content of a batch - Drying method in oven

TS EN ISO 3035 Corrugated board - Determination of surface crush strength (ISO 3035: 2011)

TS EN ISO 7263 Groove layer - Determination of surface crush strength after corrugation in laboratory

TS EN ISO 5270 Pulp - Laboratory layers - Determination of physical properties

TS EN 1034-27 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 27: Drawing machines

TS EN 1034-17 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 17: paper thinning machines

TS EN 1034-21 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 21: Coating machines

TS EN ISO 12625-11 Soft tissue paper and products Section 11-Wet ball burst strength determination

TS EN ISO 12625-8 Soft tissue and products - Part 8: Water absorption time and water absorption capacity, basket dipping test method

TS EN ISO 3037 Corrugated cardboard - Determination of edge crush strength (without edge method)

TS EN ISO 217 Paper - Unshaved dimensions - Design and tolerances for primary and complementary ranges, specifying machine direction

TS EN ISO 3037 Corrugated board - Determination of edge crush strength (non-waxed edge method)

TS EN ISO 12625-11 Soft tissue and paper products - Part 11: Determination of burst strength of wet ball

TS EN 1010-1 + A1 Safety in machines - Safety rules for the design and construction of printing and paper converting machines - Part 1: Common rules

TS EN 1010-2 + A1 Safety in machines - Safety rules for the design and construction of printing and paper converting machines - Part 2: Printing and lacquering machines, including pre-press machines

TS EN ISO 535 Paper and cardboard-Determination of water absorbency-Cobb method

TS EN 643 Paper and cardboard - European list of standard classes of recycled paper and cardboard

TS EN 16453 Pulp, paper and cardboard - Determination of phthalates in paper and cardboard extracts

TS EN ISO 535 Paper and cardboard - Determination of water absorbency - Cobb Method

TS EN 643 Paper and cardboard - European list of standard classes of paper and cardboard for recycling

TS EN ISO 12625-3 Soft tissue paper and its products - Part 3: Determination of thickness, bulk thickness and apparent bulk density

TS EN ISO 14453 Pulp - Determination of soluble substances in acetone

TS EN 16418 Paper and Cardboard - Determination of aqueous cytotoxicity using metabolically competent hepatoma cell line (HepG2)

TS EN ISO 12625-7 Soft tissue paper and products - Part 7: Determination of optical properties - Brightness and color measurement with D65 / 10 ° (daylight)

TS EN ISO 2759 Carton - Determination of explosion strength

TS EN ISO 2758 Paper - Determination of explosion strength

TS EN ISO 1974 Paper - Determination of tear strength - Elmendorf method

TS EN ISO 12625-3 Soft tissue paper and its products - Part 3: Determination of thickness, bulk thickness and apparent bulk density

TS EN ISO 12625-7 Soft tissue and products - Part 7: Determination of optical properties

TS EN ISO 2758 Paper - Determination of explosion strength

TS EN ISO 2759 Carton - Determination of explosion strength

TS EN ISO 534 Paper and cardboard - Determination of thickness, density and specific volume

TS EN ISO 12625-9 Soft tissue and products - Part 9: Determination of the bursting strength of balls

TS EN ISO 12625-15 Soft tissue paper and products - Part 15: Determination of optical properties Brightness and color measurement with C / 2 ° (closed daylight) illuminator

TS EN ISO 12625-16 Soft tissue paper and products-Section 16: Determination of optical properties - Opacity (paper backing) - With diffuse reflection method

TS ISO 4094 Paper, cardboard and paper pulp - International calibration of test equipment - Standardization and nomination and acceptance of authorized laboratories

TS ISO 10775 Paperboard and pulps - Determination of cadmium content - Atomic absorption spectrometric method

TS ISO 5267-2 Pulp - Determination of permeability - Part 2: Canadian standard - "Freedom method"

TS ISO 302 Pulp - Determination of Kappa number

TS ISO 5636-5 Paper and cardboard - Determination of air permeability (for medium air permeable products) - Part 5: Gurley method

TS ISO 5636-3 Paper and cardboard - Determination of air permeability (for medium air permeable products) - Part 2: Schopper method

TS ISO 5636-4 Paper and cardboard - Determination of air permeability (for medium air permeable products) - Part 4: Sheffied method

TS ISO 3260 Pulp - Determination of chlorine consumption (degree of delignification)

TS ISO 3783 Paper and cardboard - Determination of tensile strength - Increasing speed method using Igt tester (electrical model)

TS ISO 2469 Paperboard and pulps - Determination of spreading factor

TS ISO 2471 Paper and cardboard - Determination of opacity (backing of paper) - Diffuse reflection method

TS ISO 9197 Paperboard and pulps - Determination of water-soluble chlorides

TS ISO 11556 Paper and cardboard - Determination of curl using a single test piece suspended in a vertical position

TS ISO 2470-2 Paper, cardboard and pulp - Diffuse blue reflectance factor measurement - Part 2: Clear daylight conditions (D65 brightness)

TS ISO 5627 / Cor.1 Paper and cardboard surface determination (surface method)

TS ISO 5628 Paper and cardboard-Determination of bending strength by static methods-General principles

TS ISO 13542 Specification for internal pipe diameters for paper and cardboard coils

TS ISO 8791-4 Paper and cardboard - Determination of surface roughness (air leakage methods) Section 4: Print-Surf method

TS ISO 8791-2 Paper and cardboard - Determination of surface roughness (air leakage methods) Section 2: Bendtsen method

TS ISO 8791-3 Paper and cardboard - Determination of surface roughness (air leakage methods)

TS ISO 5350-3 Pulp - Stain and spot determination - Part 3: Inspection with reflected light

TS ISO 11093-7 Paper and cardboard - Test of axle tubes - Part 7: Determination of modulus of elasticity by three point method

TS ISO 11093-9 Paper and cardboard - Testing of axle tubes - Part 9: Determination of horizontal crush strength

TS ISO 15360-2 / Cor.1 Recycled paper pulp - Evaluation of adhesives and plastics - Part 2: Image analysis method

TS ISO 16065-1 Pulp - Determination of fiber length by automatic optical analysis - Part 1: Polarized light method

TS ISO 9895 Paper and corton-Crush strength-Short jaw span test

TS ISO 11093-6 Paper and cardboard - Testing of axle tubes - Part 6: Determination of bending strength by three point method

TS ISO 11093-5 Paper and cardboard - Testing of axle tubes - Part 5: Determination of rotation characteristics in the same center

TS ISO 11093-8 Testing paper and cardboard-axle tubes-Part 8: Flexibility modulus and natural frequency determination by experimental mode analysis

TS ISO 12830 Paper, cardboard and pulp - Determination of acid soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

TS ISO 5631-1 Paper and cardboard - Color determination by scattered reflection method - Part 1: Closed daylight conditions (C / 2 °)

TS ISO 2470-1 Paper, cardboard and pulp - Diffuse blue reflectance factor measurement - Part 1: Clear daylight conditions (ISO brightness)

TS ISO 11093-8 / Tech.Cor.1: 2013Testing of paper and cardboard tubes-Section 8: Flexibility modulus and natural frequency determination by experimental mode analysis

TS ISO 4094 Paper, cardboard and paper pulp - International calibration of test equipment - Standardization and nomination and acceptance of authorized laboratories

TS ISO 5627 / Cor.1 Paper and cardboard - surface smoothness (Bekk method)

TS EN 12281 / D1 Printing and office paper - Copy paper for dry toner copying

TS ISO 6588-1 Paper, cardboard and pulps- Determination of aqueous extracts-Part 1: Cold extraction

TS ISO 6588-2 Paper, cardboard and pulps - Determination of aqueous extracts - Part 1: Hot extraction

TS ISO 1762 Paper, cardboard and pulps - Determination of ash (ash) in combustion at 525 ° C

TS ISO 2493-1 Paper and cardboard - Determination of flexural strength - Part 1: Constant ratio of deflection

TS ISO 2493-2 Paper and Cardboard-Determination of flexural strength-Part 2: Taber-type tester

TS EN ISO 8254-2 Paper and cardboard - Measurement of specular gloss - Part 2: Brightness in 75 ° with parallel beam, DIN method

TS EN 1230-1 Paper and cardboard - Food contact - Sensory analysis - Part 1: Odor

TS EN 1230-2 Paper and cardboard - Food contact - Sensory analysis - Part 2: Loss of flavor (degradation)

TS 11653 Calcite - used in paper industry

TS EN ISO 12625-6 Tissue paper and tissue products - Part 5: determination of wet tensile strength (ISO 12625-5: 2005)

TS EN ISO 12625-5 Tissue paper and tissue products - Part 5: determination of wet tensile strength (ISO 12625-5: 2005)

TS EN ISO 12625-4 Tissue paper and tissue products - Part 4: Determination Tensile strength, tensile strength and stress at maximum strength Energy absorption (ISO 12625-4: 2016)

TS ISO 5351 Cellulose in dilute solutions - Determination of the limit viscosity number - 18.01.2010 85.040

TS EN ISO 216 Some classes of writing paper and printed material-Shaved dimensions-A and b series machine orientation

TS EN ISO 287 Paper and cardboard - Determination of moisture - Drying method in oven

TS EN ISO 638 Paper, cardboard and pulp - Determination of dry matter - Drying method in oven

TS EN 646 Paper and cardboard - Food contact - Determination of color fastness in dyed paper and cardboard

TS ISO 692 Pulp - Determination of solubility in alkaline

TS ISO 801-2 Pulp - Determination of salable pulp mass in batch Part 2: Baled pulp in sheet form (such as instant dried pulp)

TS EN ISO 801-1 Pulp - Determination of the mass of salable pulp in the batch - Part 1: Baled pulp in sheet

TS EN ISO 801-3 Pulp - Determination of salable pulp mass in the lot - Part 3: Combined bales

TS EN 920 Paper and cardboard - Food contact - Determination of dry matter content in aqueous extract

TS 927 ISO 269 Envelopes used in communication-Dimensions and representation

TS 948 ISO 353 Some classes of processed writing paper and printed material - Method of specifying dimensions

TS EN 1010-5 Safety in machinery - Safety rules for the design and construction of printing and paper converting machines - Part 5: Machines for the manufacture of corrugated board and machines for the conversion of flat and corrugated board "

TS EN 1010-3 + A1 Safety in machines - Safety rules for the design and construction of printing and paper converting machines part 3: Cutting machines

TS EN 1010-4 + A1 Safety in machines - Safety rules for the design and construction of printing and paper converting machines - Part 4: Book binding, paper converting and paper finishing machines

TS EN 1034-1 + A1 Safety in machines - Safety rules for the design and construction of paper manufacturing and finishing machines - Part 1: General rules

TS EN 1034-13 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 13: Wood shredders

TS EN 1034-2 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 2: Trimming rollers

TS EN 1034-6 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 6: Calender

TS EN 1034-14 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 14: Roller separators

TS EN 1034-5 + A1 Safety in machinery - Safety rules for the design and construction of papermaking and finishing machines - Part 5: Sheeter

TS EN 1034-22 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 22: Wood shredders

TS EN 1034-4 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 4: Pulpers and loading plants

TS EN 1034-7 + A1 Safety in machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 7: Crates

TS EN 1104 Paper and cardboard - Food contact - Determination of the transfer of antimicrobial substances

TS EN 1230-2 Paper and cardboard - Food contact - Sensory analysis - Part 2: Loss of flavor (degradation)

TS 1302 ISO 2144 Paper, cardboard and pulp-900 Determination of incineration (ash) at ° C

TS EN 1541 Paper and cardboard - In contact with foodstuffs - Determination of formaldehyde in aqueous extract

TS ISO 2528 Layer materials - Determination of water vapor transmission rate - Gravimetric method

TS ISO 3688 Pulp - Preparation of laboratory layers for the measurement of blue reflectance factor (iso whiteness)

TS EN ISO 5263-3 Pulp - Wet fiber opening in the laboratory - Part 3

TS ISO 5264-1 Pulp - Laboratory grinding - Part 1: Valley grinding method

TS EN ISO 5267-1 Pulp - Determination of permeability - Part 1: Schopper-Riegler method

TS EN ISO 5267-1 / AC Pulp - Determination of permeability - Part 1: Schopper-Riegler method

TS EN ISO 5269-1 Pulps - Preparation of laboratory layers for physical experiments - Part 1: Preparation of laboratory layers for physical experiments

TS EN ISO 5269-2 Pulp - Preparation of laboratory layers for physical experiments - Part 2: Rapid-Köthen method

TS EN ISO 5350-1 Pulp - Stain and spot determination section 1: Examination of laboratory layers

TS EN ISO 5350-2 Paper pulp - Determination of stains and spots - Part 2: Examination of paper pulp

TS ISO 5350-4 Pulp - Determination of spots and spots - Part 4: Instrument inspection - Using equivalent black area (eba) method with reflected light

TS ISO 5638 Hard cardboard - Determination of the weight of individual layers

TS ISO 5647 Paper and cardboard - Determination of titanium dioxide content

TS 5734 ISO 9961 Drawing materials for technical drawings - Natural tracing paper

TS ISO 8226-1 Paper and cardboard - Measurement of moisture expansion - Part 1: Moisture expansion up to% 68 relative humidity

TS ISO 8226-2 Paper and cardboard - Measurement of moisture expansion - Part 2: Moisture expansion up to relative humidity up to 86%

TS EN ISO 8254-1 Paper and cardboard - Measurement of specular luminance - Section 1: Brightness at 75 ° with collecting beam, method of addition

TS 8309 ISO 5630-3 Paper and cardboard - Accelerated aging - Part 3: Moist heat treatment at 80 c temperature and 65 relative humidity%

TS ISO 8439 Design of forms - Basic editing principles

TS ISO 9184-1 Paper, cardboard and pulps-Fiber analysis section 1: General method

TS ISO 9184-2 Paper, cardboard and pulps - Fiber structure analysis - Part 2: Dyeing guide

TS ISO 9184-3 Paper, cardboard and pulps-Fiber structure analysis section 3: Herzberg staining test

TS ISO 9184-4 Paper, cardboard and pulps-Fiber structure analysis section 4: Graff "c" staining test

TS ISO 9184-5 Paper, cardboard and pulps-Fiber structure analysis-Part 5: Loftan-Merrite staining test (wisbar modification)

TS ISO 9184-6 Paper, cardboard and pulps-Fiber structure analysis-Part 6: Determination of fiber size

TS ISO 9184-7 Paper, cardboard and pulps-Fiber structure analysis-Part 7: Determination of weight factor

TS ISO 9184-4 Paper, cardboard and pulps-Fiber structure analysis section 4: Graff "c" staining test

TS ISO 10154 Thin-walled coatings - Three-piece tinplate aerosol containers top lid sizes

TS ISO 10716 paper and cardboard - Determination of alkali reserves

TS ISO 11093-2 Paper and cardboard - Testing of axle tubes - Part 2: Condition of test specimens

TS ISO 11093-3 Paper and cardboard - Testing of axle tubes - Part 3: Determination of moisture content using oven drying method

TS ISO 11093-4 Paper and cardboard - Test of axes - Part 4: Measuring dimensions

TS ISO 11480 Paperboard and pulps - Determination of total chlorine and organically bound chlorine

TS EN 12281 Printing and office paper - Copy paper specifications for dry toner copying

TS EN 12283 Paper - Printing and office paper - Determination of toner adhesion

TS EN 12497 Paper and cardboard - Food contact - Determination of mercury in aqueous extract

TS EN 12858 Paper - Printing and office paper - Features of printed continuous forms

TS EN 14086 Paper and cardboard - Measurement of reflective brightness - 45º brightness with parallel beam, religion method

TS ISO 14487 Pulp - Standard water for physical experiments

TS EN 14719 Pulp, paper and cardboard - Determination of diisopropylnaphthalene (dipn) content by solvent extraction

TS EN ISO 15318 Paperboard and pulps - Determination of specific 7 polychlorinated biphenyls (pcb)

tst EN ISO 15320 Pulp, paper and cardboard - Determination of pentachlorphenol in aqueous extract

TS ISO 15359 Paper and cardboard - Determination of static and kinetic friction coefficient - Horizontal plane method

TS ISO 15360-2 Recycled pulps - Evaluation of adhesives and plastics - Part 2: Image analysis method

TS ISO 15361 Pulp - Determination of tensile strength at wet or dry, zero jaw opening

TS EN ISO 15755 Paper and cardboard - Determination of unwanted particles

TS EN 25264-3 Pulps - Laboratory grinding - Part 3: Jokro grinding method

TS ISO 4094 Paper, cardboard and paper pulp - International calibration of test equipment - Standardization and nomination and acceptance of authorized laboratories