We provide professional testing, inspection and certification services to all of the following standards regarding Road Paving.
TS EN 1463-2 Road marking materials - Reversing studs - Part 2: Road test performance characteristics
TS EN 1463-2 Road marking materials - Reflective road buttons - Part 2: Road test performance characteristics
TS EN ISO 11674 Ships and marine technology - Gap control systems
TS EN ISO 11819-1 Acoustics - Measurement of the effect of road surfaces on traffic noise - Part 1: Statistical crossing method
TS 5926 EN 14188-2 Joint fillers and joint sealants - Part 2: Cold-applied joint sealants - Specifications
TS EN 12697-10 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 10: Compressibility
TS EN 12274-1 Bentonite suspension coatings - Test methods - Part 1: Sampling for binder extraction
TS EN 12274-3 Bentonite suspension coatings - Test methods part 3: Consistency
TS EN 12274-6 Bentonite suspension coatings-Test methods-Part 6: Application speed
TS EN 12274-3 Bituminous mortar coatings - Test methods - Part 3: Consistency
TS EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas
TS EN 12697-8-Bituminous mixtures-Test methods for hot asphalt mixtures-Part 8: Determination of void properties of bituminous test specimens
TS EN 12697-36 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 36: Determination of thickness of pavements from bituminous material
TS EN 13043 Aggregates - For surface treatment and bituminous mixtures to be used in roads, airports and other open traffic areas
TS EN 13036-3 Surface characteristics of the roadway and airport runway - Test methods - Part 3: Measurement of horizontal draining of the coating surface
TS EN 13286-44 Mixtures with or without binders - Test methods - Part 44: Determination of alpha coefficient of vitrified blast furnace slag
TS EN 1424 Road Marking Materials - Ready Mixed Glass Beads
TS EN 13036-7 Surface characteristics of the roadway and airport runway - Test methods - Part 7: Measurement of deflection of the pavement layers from the flatness: Measurement test using gauge
TS EN 13880-1 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 ° C
TS EN 13880-2 Hot applied sealants - Part 2: Test method for the determination of cone penetration at 25 ° C
TS EN 13880-13 Hot applied sealants - Part 13: Test method for the determination of intermittent expansion (adhesion test)
TS 436 EN 1340 Concrete curb stones for floor covering - Requirements and test methods
TS EN 12697-18 Bituminous mixtures - Test methods - For hot mix asphalt - Part 18: Filtration of binder
TS EN 12697-38 Bituminous mixtures - Test methods - For hot mix asphalt - Part 38: General equipment and calibration
TS EN 13880-5 Joint sealing materials - Hot applied - Part 5: Test method - Determination of resistance to flow
TS EN 13877-3 Concrete coatings - Part 3: Nails for concrete coatings - Specifications
TS EN 1424 / A1 Road marking materials - Ready-mixed glass beads
TS EN 1338 / AC Concrete paving blocks for flooring - Requirements and test methods
TS 2824 EN 1338 / AC Concrete paving blocks for flooring - Requirements and test methods
TS 436 EN 1340 / AC Concrete curb stones for floor covering - Requirements and test methods
TS EN 12271 Surface preparation rules
TS EN 12697-31 Bituminous mixtures - Test methods - For hot mix asphalt - Part 31: Sample preparation - With vibratory compactor
TS EN 1339 / T2 Concrete paving slabs for flooring - Requirements and test methods
TS EN 12697-12 Bituminous mixtures - Test methods - For hot mix asphalt - Part 12: Determination of water sensitivity of bituminous samples
TS EN 1463-1 Road marking materials - Reflecting road studs - Part 1: Initial performance characteristics
TS EN 13285 Mixtures without binders - Specifications
TS EN 12697-44 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 44: Crack propagation by semicircle bending test
TS EN 1367-5 Tests for thermal and degradation properties of aggregates - Part 5: Determination of resistance to thermal shock
TS EN 12697-32 + A1 Bituminous mixtures - Test methods for hot asphalt mixtures - part 32: Laboratory compaction of bituminous mixtures with vibratory compactor
TS EN 13459 Road marking materials-Sampling-Sampling and testing of stored materials
TS EN 13036-4 Road and airport surface properties - Test methods - Part 4: Method for measuring the slip / brake strength of the surface-Pendulum method
TS EN 1423 Road marking materials - Cast materials - Glass beads, non-slip aggregates and their mixtures
TS EN 1423 Road marking materials - Cast materials - Glass beads, anti-slip aggregates and their mixtures
TS EN 12697-5: 2010 / AC Bituminous mixtures-Hot asphalt mixtures-Test methods-Part 5: Determination of maximum density
TS EN 12697-26 Bituminous mixtures - Test methods - For hot mix asphalt - Part 26: Hardness
TS EN 12697-6 Bituminous mixtures-Hot asphalt mixtures-Test methods-Part 6: Determination of bulk density of bituminous test samples
TS EN 12697-11 Bituminous mixtures - Test methods - For hot mix asphalt - Part 11: Determination of bonding between aggregate and bitumen
TS EN 12697-20 Bituminous mixtures - Test methods - For hot mix asphalt - Part 20: Trace using cube samples or marshall samples
TS EN 12697-21 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 21: Sinking in plate samples
TS EN 13863-4 Concrete pavements - Part 4: Test methods - Determination of the resistance of concrete pavements to stud wear
TS EN 12697-45 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 45: Saturation aging tensile stiffness (dyçs) conditioning test
TS EN 13286-47 Mixtures without binder and hydraulic binder - Part 47: Test method for determination of California transport rate, instant transport index and linear swelling
TS EN 12697-30 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 30: Sample preparation with impact compressor
TS EN 12697-34 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 34: Marshall test
TS EN 12697-46 Bituminous mixtures-Test methods for hot asphalt mixtures-Part-46: Uniaxial tensile tests low temperature cracking and properties
TS EN 12697-24 Bituminous mixtures-Hot asphalt mixtures-Test methods-Part 24: Fatigue resistance
TS EN 13286-50 Mixtures without binders and hydraulic binders - Part 50: Method of preparation of test specimens from hydraulic binder mixtures by applying compression method with proctor equipment or vibrating table
TS EN 13286-51 Mixtures without binders and hydraulic binders - Part 51: Method of preparation of test specimens by means of a vibratory rammer compression method from mixtures with hydraulic binders
TS EN 13286-52 Mixtures without binders and hydraulic binders - Part 52: Method of preparation of test specimens by applying vibratory compressors from hydraulic binders
TS EN 13286-53 Mixtures without binders and hydraulic binders - Part 53: Method of preparation of test specimens by applying axial compression from hydraulic binders
TS EN 13596 Flexible sheets for waterproofing - Insulation of bridge deck concretes and other concrete surfaces open to traffic - Determination of bond strength
TS EN 12697-19 Bituminous mixtures - Hot mixed asphalt test methods - Part 19: Sample permeability
TS EN 1341 Natural paving stones for exterior paving - Properties and test methods
TS EN 1342 Natural paving stones for exterior paving - Features and test methods
TS EN 1343 Natural curb stones for exterior paving - Features and test methods
TS EN 13286-2 Mixtures without binders and hydraulic binders - Part 2: Test methods - Determination of density and water content for laboratory reference - Compaction with proctor
TS EN 12697-1 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 1: Soluble binder content
TS EN 12697-39 Bituminous mixtures - Test methods - For hot mix asphalt - Part 39: Determination of the amount of binder by incineration
TS EN 12697-40 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 40: On-site drainage (water permeability)
TS EN 12697-42 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 42: Amount of coarse impurities in recycled asphalt
TS EN 13282-1 Hydraulic couplers - Part 1: Quick-hardening hydraulic couplers - Composition, characteristics and conformity criteria
TS EN 1423: 2012 / AC: 2013 Road marking materials - Cast materials - Glass beads, anti-slip aggregates and their mixtures
TS EN 13877-1 Concrete coatings - Part 1: Materials
TS EN 13877-2 Concrete coatings - Part 2: Functional requirements for concrete coatings
TS EN 1423: 2012 / AC: 2013 Road marking materials - Cast materials - Glass beads, anti-slip aggregates and their mixtures
tst EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas
TS EN 14227-1 Mixtures with hydraulic binders - Specifications - Part 1: Granular mixtures with cement binders
TS EN 14227-2 Mixtures with hydraulic binders - Specifications - Part 2: Mixtures with slag binders
TS EN 14227-3 Mixtures with hydraulic binders - Specifications - Part 3: Mixtures with fly ash binders
TS EN 14227-4 Hydraulic binder mixtures - Specifications - Part 4: Fly ash for hydraulic binder mixtures
TS EN 14227-5 Hydraulic couplings - Specifications - Part 5: Hydraulic couplings for road construction
TS EN 12697-3 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 3: Bitumen recovery: Rotary evaporator method
TS EN 13808 Bitumen and bituminous binders - General principles for the identification of cationic bitumen emulsions
TS EN 12697-41 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 41: Resistance to de-icing fluids
TS EN 1342 Natural paving stones laid on external floors - Requirements and test methods
TS EN 1341 Natural facing stones laid on exterior floors - Requirements and test methods
TS EN 1343 Natural curb stones laid on external floors - Requirements and test methods
TS EN 1344 Floor covering elements made of clay - Properties and test methods
TS EN 1790 Road Marking Materials - Pre-formed road signs
TS EN 12697-49 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 49: Determination of friction after polishing
TS EN 13924-2 Bitumen and bituminous binders - Specification frame for special coating bitumen - Multi-quality flooring bitumen
TS EN 15382 Geosynthetic barriers - Characteristics required for use in transport infrastructure
TS EN 1367-5 Tests for thermal and decomposition properties of aggregates - Part 5: Determination of thermal shock resistance
TS EN 13197: 2011 + A1: 2014 Road marking materials - Attrition simulators
TS EN 12697-7 Bituminous mixtures - Hot asphalt mixtures - Test methods - Part 7: Determination of bulk density of bituminous samples using gamma rays
TS EN 12697-43 Bituminous mixtures - Hot asphalt mixtures - Test methods - Part 43: Determination of resistance to fuel
TS EN 13197 Road marking materials - Wear simulators
TS EN 13197: 2011 + A1: 2014 Road marking materials - Attrition simulators
TS EN 12697-7 Bituminous mixtures - Hot asphalt mixtures - Test methods - Part 7: Determination of bulk density of bituminous samples using gamma rays
TS EN 12697-43 Bituminous mixtures - Hot asphalt mixtures - Test methods - Part 43: Determination of resistance to fuel
TSE CEN / TS 12633 Method of polishing samples before measuring slip and aquaplaning resistance
TSE CEN / TS 13286-54 Mixtures with and without binders - Part 54: Test method for determination of sensitivity to frost - Resistance to freezing and thawing of mixtures with hydraulic binders.
TSE CEN / TS 15901-15 Characteristics of road and airport runway surfaces - Part 15: Process for determining the slip resistance of the pavement surface using a longitudinally controlled sliding device (LFCI): IMAG
TS EN 12697-49 Bituminous mixtures - Hot asphalt mixtures - Test methods - Part 49: Determination of friction after polishing
TS EN 13863-1 Concrete pavements - Part 1: Test method - Determination of concrete pavement thickness - Measurement method
TS EN 13863-2 Concrete pavements - Part 2: Test method - Determination of adherence between two layers
TS EN 13863-3 Concrete pavements - Part 3: Test method - Determination of concrete pavement thickness by coring
TS EN 13863-4 Concrete pavements - Part 4: Test methods - Determination of the resistance of concrete pavements to stud wear
200873588 Rubber polyurethane based interlocking and square cobblestone (elaspol cobblestone)
TS EN 13036-7 Surface characteristics of the roadway and airport runway - Test methods - Part 7: Measurement of the deflection of the pavement layers from the flatness: Measurement test using the gauge
TS EN 15382 Geosynthetic barriers - Characteristics required for use in transport infrastructure
TS EN 13282-1 Road hydraulic couplers - Part 1: Quick-hardening road hydraulic couplers - Composition, characteristics and conformity criteria
TS EN 13282-3 Road hydraulic couplers - Part 3: Conformity assessment
TS EN 13036-3 Surface characteristics of the roadway and airport runway - Test methods - Part 3: Measurement of horizontal draining of the coating surface
TS EN 13286-44 Mixtures with or without binders - Test methods - Part 44: Determination of alpha coefficient of vitrified blast furnace slag
TS EN 14227-2 Hydraulic binder mixtures - Specifications - Part 2: Granular mixtures with slag binders
TSE K 484 Auxiliary products for the visually impaired or the visually impaired - Sensible walking surfaces made of metal
TS EN 1344: 2013 / AC Laying elements made of clay - Properties and test methods
TS EN 12697-2 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 2: Determination of particle size distribution
TS EN 13282-2 Hydraulic road connector - Part 2: Normal hardening hydraulic road connector - Composition, properties and conformity criteria
TS EN 12697-4 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 4: Bitumen recovery: Distillation column method
TS EN 13808 Bitumen and bituminous binders - General principles for the identification of cationic bitumen emulsions
TS 13720 Auxiliary products for the blind or visually impaired - Product features for sensible walking surfaces
tst 2015104666 On-site inspection tests - Determination of deflection caused by falling weight type impact load device
TS EN 13924-1 Bitumen and bituminous binders - General principles for special coating class bitumen properties - Part 1: Hard coating class bitumen
TS 13759 On-site control tests - Determination of soil and rock density by sand displacement in the test pit
TS EN 14227-15 Hydraulic Connector Ways-Features-Part 15: Hydraulic stabilized soil
TSE CEN / TS 15901-14 Surface characteristics of the roadway and airport runway - Part 14: Method for determining the slip resistance of the pavement surface using a longitudinally controlled sliding device: Friction meter (analysis of roadway and recording using advanced technique)
TS EN 12697-16 Bituminous mixtures - Test methods - Part 16: Wear from studded tires
TS EN 12697-35 Bituminous mixtures - Test methods - Part 35: Mixture prepared in the laboratory
TS EN 15626 Bitumen and bituminous binders - Determination of the adhesion of particulate bituminous binders by immersion in water
TS EN 13108-1 Bituminous mixtures - Material properties - Part 1: Concrete asphalt
TS EN 13108-2 Bituminous mixtures - Material properties - Part 2: Concrete asphalt for very thin layers
TS EN 13108-3 Bituminous mixtures - Material specifications - Part 3: Soft asphalt
TS EN 13108-4 Bituminous mixtures - Material properties - Part 4: Hot mix asphalt
TS EN 13108-5 Bituminous mixtures - Material properties - Section 5: Stone mastic asphalt
TS EN 13108-6 Bituminous mixtures - Material properties - Part 6: Mastic asphalt
TS EN 13108-7 Bituminous mixtures - Material properties - Part 7: Porous asphalt
TS EN 12697-25 Bituminous mixtures - Test methods - Part 25: Repeated pressure test
TS EN 13108-8 Bituminous mixtures - Material specifications - Part 8: Recycled asphalt
TS EN 13108-9 Bituminous mixtures - Material properties - Part 9: Ultra thin layer asphalt
TS EN 13108-20 Bituminous mixtures - Material properties - Part 20: Type tests
TS EN 13108-21 Bituminous mixtures - Material properties - Part 21: Factory manufacturing control
TS 13720 / T1 Auxiliary products for the visually impaired or visually impaired - Product characteristics for sensible walking surfaces
TS EN 12697-17 Bituminous mixtures - Test methods - Part 17: Particle loss in porous asphalt samples
TS EN 14187-4 Joint fillers - Cold applied - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuel and liquid chemicals
TS EN 14187-2 Joint fillers - Cold applied - Test methods - Part 2: Test method for determination of pre-bonding time
TS EN 14187-8 Joint fillers - Cold applied - Test methods - Part 8: Determination of artificially weathered weathering by UV irradiation
TS EN 14187-6 Joint fillers - Cold applied - Test method - Part 6: Determination of adhesion / cohesion properties after immersion in test fuel and liquid chemicals
TS 13785 Soil control tests on site - Determination of soil and rock density by nuclear methods
TS EN 14187-3 Joint fillers - Cold applied - Test methods - Part 3: Determination of self-leveling properties
TSE K 484 / T1 Auxiliary products for the visually impaired or visually impaired - Perceptible walking surfaces made of metal
TSE K 50 Cold patch bitumen mixture for asphalt pavement repair
TS 112 EN 12970 Mastic asphalt for waterproofing - recipes, specifications and test methods
TS 436 EN 1340 / T1 Concrete curb stones for floor covering - Requirements and test methods
TS 436 EN 1340 / T2 Concrete curb stones for floor covering - Requirements and test methods
tst EN 12591 Bitumens and bituminous binders - Coating class bitumens - Specifications
TS 1084 EN 14260 Coal pyrolysis products - Coal tar and pitch based binders and related products: Road tar - Properties and test methods
Coal pyrolysis products - Coal tar and pitch based binders and related products: Road tar - Properties and test methods
TS EN 1339 Concrete paving slabs for flooring - Requirements and test methods
TS EN 1339 / T1 Concrete paving slabs for flooring - Requirements and test methods
TS EN 1339 / AC Concrete slabs for floor covering - Requirements and test methods
TS EN 1871 Road marking materials - Physical properties
TS EN 1871 / tst T Road marking materials - Physical properties
TS 2824 EN 1338 Concrete paving blocks for flooring - Requirements and test methods
TS 2824 EN 1338 / T1 Concrete paving blocks for floor covering - Requirements and test methods
TS EN 12271 Surface coatings - Requirements
TS EN 12272-1 Surface coating-Test methods-Part 1: Spreading and washing speed and sensitivity
TS EN 12272-2 Surface coatings - Test methods - Part 2: Visual assessment of defects
TS EN 12272-3 Surface coatings - Test method - Part 3: Determination of adhesion of binder to aggregate by shock test method using vialit plate
TS EN 12273 Bituminous mortar coatings - Requirements
TS EN 12274-2 Bentonite suspension coatings - Test methods - Part 2: Determination of residual binder content
TS EN 12274-4 Bentonite suspension coatings - Test methods - Part 4: Determination of cohesion of the mixture
TS EN 12274-5 Bentonite-coated coatings - Test methods - Part 5: Determination of wear
TS EN 12274-7 Bituminous mortar coatings - Test methods - Part 7: Shaking abrasion test
TS EN 12274-8 Bituminous mortar coatings - Test methods - Part 8: Determination of defects by eye
TS EN 12274-1 Bituminous mortar coatings - Test methods - Part 1: Sampling for binder extraction
TS EN 12274-6 Bituminous mortar coatings - Test methods - Part 6: Application rate
TS EN 12591 Bitumen and bituminous binders-Coating class bitumens-Features
TS EN 12697-13 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 13: Temperature measurement
TS EN 12697-14 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 14: Determination of water content
TS EN 12697-27 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 27: Sampling
TS EN 12697-29 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 29: Determination of bituminous sample sizes "
TS EN 12697-10 Bituminous mixtures - Test methods for hot asphalt mixtures - part 10: Compressibility
TS EN 12697-15 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 15: Determination of separation sensitivity
TS EN 12697-23 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 23: Indirect determination of tensile strength of bitumen samples
TS EN 12697-37 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 37: Hot sand test for adhesion of binder on precoated chips for Hra
TS EN 12697-5 Bituminous mixtures-Hot asphalt mixtures-Test methods-Part 5: Determination of maximum density
TS EN 12697-9 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 9: Determination of reference density
TS EN 12697-10 / AC Bituminous mixtures - Test methods for hot asphalt mixtures - Part 10: Compressibility
TS EN 12697-14 / AC Bituminous mixtures-Test methods for hot asphalt mixtures-Part 14: Determination of water content
TS EN 12697-22 + A1 Bituminous mixtures-Hot asphalt mixtures-Test methods-Part 22: Wheel tracks
TS EN 12697-33 + A1 Bituminous mixtures-Hot asphalt mixtures-Test methods-Part 33: Test samples prepared with roller compactor
TS EN 12697-47: 2010 Bituminous mixtures-Test methods for hot asphalt mixtures-Part 47: Determination of ash content of natural asphalt
TS EN 12802: 2011 Road marking materials-Laboratory methods used for identification
TS EN 13286-1 Mixtures without binders and hydraulic binders - Part 1: Test methods - Density and water content for laboratory reference - Introduction, general requirements and sampling
TS EN 13286-3 Mixtures without binders and hydraulic binders - Part 3: Test methods - Density and water content for laboratory reference - Vibration compaction using controlled parameters
TS EN 13286-4 Mixtures without binders and hydraulic binders - Part 4: Test methods - Density and water content for laboratory reference - Vibratory rammer
TS EN 13286-5 Mixtures with and without binders - Part 5: Test methods - Density and water content for laboratory reference - Vibration table
TS EN 13286-7 Mixtures with and without binders - Part 7: Triaxial cycle loading test for mixtures without binders
TS EN 13286-48 Mixtures with and without binders - Part 48: Test method for the determination of the degree of pulverization
TS EN 13286-40 Mixtures without binders and hydraulic binders - Part 40: Test method - Direct determination of tensile strength of hydraulic binder mixtures
TS EN 13286-41 Mixtures with and without binders - Part 41: Test method - Determination of compressive strength of mixtures with hydraulic binders
TS EN 13286-42 Mixtures without binders and hydraulic binders - Part 42: Test method - Indirect determination of tensile strength of hydraulic binder mixtures
TS EN 13286-43 Mixtures with and without binders - Part 43: Test method - Determination of the modulus of elasticity of mixtures with hydraulic binders
TS EN 13286-45 Mixtures without binders and hydraulic binders - Part 45: Test method - Determination of the time during which the hydraulic binder mixtures retain processability
TS EN 13286-46 Mixtures without binders and hydraulic binders - Part 46: Test method - Determination of moisture content
TS EN 13286-49 Mixtures without binders and hydraulic binders - Part 49: Accelerated swelling test for lime and / or ground treated with hydraulic binders
TS EN ISO 13473-5 Description of coating texture - Using surface profiles - Part 5: Megadoku determination
TS EN 13588 Bitumen and bituminous binders - Determination of cohesion of bituminous binders - By pendulum test
TS EN 13863-1 Concrete pavements - Part 1: Test method - Determination of concrete pavement thickness - Measurement method
TS EN 13863-2 Concrete pavements - Part 2: Test method - Determination of bond strength between two layers
TS EN 13863-3 Concrete pavements - Part 3: Test methods - Determination of concrete pavement thickness by coring
TS EN 13877-3 Concrete coatings - Part 3: Nails for concrete coatings - Specifications
TS EN 13880-3 Hot applied sealants - Part 3: Test method for determination of penetration and return (elasticity)
TS EN 13880-4 Hot applied sealants - Part 4: Test method for the determination of thermal resistance - Change in penetration value
TS EN 13880-7 Hot applied sealants - Part 7: Function tests of joint sealants
TS EN 13880-8 Hot applied sealants - Part 8: Test method for the determination of the change in mass of liquid fuel-resistant sealants after immersion in liquid fuel
TS EN 13880-9 Hot applied sealants - Part 9: Test methods for the determination of compatibility with asphalt pavements
TS EN 13880-10 Hot applied sealants - Part 10: Test method for the determination of adhesion and cohesion after continuous expansion and compression
TS EN 13880-11 Hot-applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks for function testing and determination of compatibility with asphalt pavements
TS EN 13880-12 Hot applied sealants - Part 12: Test method for the preparation of concrete test blocks used in adhesion testing (prescription methods)
TS EN 13880-6 Joint sealing materials - Hot applied - Part 6: Method of preparation of samples for testing
TS EN 14023 Bitumen and bituminous binders - General principles for polymer modified bitumen specifications
TS EN 14187-1 Joint fillers - Cold applied - Test method for determination of curing rate
TS EN 14187-5 Joint fillers - Test method for determination of resistance to cold-applied hydrolysis
TS EN 14187-7 Joint fillers - Cold applied - Test method for determination of flame resistance
TS EN 14187-9 Connection seals - Cold applied - Test methods - Part 9: Function tests
TS EN 14188-1 Joint sealants and joint sealants - part 1: Hot-applied joint sealants - Specifications
TS EN 14188-4 Joint fillers and joint sealants - Part 4: Characteristics of primers to be used with joint sealants
TS EN 14840 Joint fillers and insulation materials - Test methods - Applied to preformed gaskets
TS EN 15381 Geotextiles and geotextile products - Requirements for use in pavements and asphalt pavements
TS EN 15466-3 Primers - For cold and hot joint sealants - Part 3: Determination of the solids content and volatilization behavior of volatile substances
TS EN 15466-1 Primers - For cold and hot joint sealants - Part 1: Determination of homogeneity
TS EN 15466-2 Primers - For cold and hot joint sealants - Part 2: Determination of alkali resistance
TS EN 12697-8 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 8: Determination of cavity properties of bituminous samples