We provide inspection and certification services to meet the requirements of the land area within the scope of construction sites. All standards regarding construction foundations are as follows.
TS 1500 Soil classification in civil engineering
TS EN 12715 Special geotechnical applications-Sherbet
TS EN ISO 13793 Thermal performance of buildings - Thermal design of foundations to prevent the expansion effect of ice
TS EN 13331-1 Trench coating systems-Test 1-Product characteristics
TS EN 13331-2 Trench coating systems - Part 2: Evaluation by test or account
TS EN ISO 14688-1 Geotechnical surveys and tests-Definition and classification of soils-Section 1: Description and description
TS EN 13331-2 Trench coating systems - Part 2: Evaluation by test or account
TS EN ISO 14688-1 Geotechnical surveys and tests - Definition and classification of soils - Part 1: Description and description
TS EN ISO 14689-1 Geotechnical surveys and tests - Identification and classification of rocks - Part 1: Introduction (ISO 14689-1: 2003)
TS EN ISO 22476-2 Geotechnical surveys and tests - Field tests - Part 2: Dynamic probe test
TSE CEN ISO / TS 17892-9 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 9: Consolidated triaxial pressure test on water-saturated soil
TSE CEN ISO / TS 17892-10 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 10: Direct shear test
TS EN 12794 + A1 Precast concrete products - Foundation piles
TS EN 12794 + A1 / AC Precast concrete products - Foundation piles
TS EN ISO 22476-12 Geotechnical surveys and tests - Field tests - Part 12: Mechanical conical penetration test (cptm)
TS EN 1997-1 / AC Geotechnical design - Part 1: General rules (eurocode 7)
TS 1900-1 / tstT2 Soil laboratory tests in civil engineering - Part 1: Determination of physical properties
TS EN 1997-2 / AC: 2010 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)
TS EN 14490 Special geotechnical applications - Soil nailing
TS EN ISO 22475-1 Geotechnical surveys and tests - Sampling methods and groundwater measurements - Part 1: Technical application guidelines
TS EN ISO 14689-1 Geotechnical surveys and tests - Definition and classification of rocks - Part 1: Description and description
TS EN ISO 22476-2 Geotechnical surveys and tests - Field tests - part 2: Dynamic probe test
TS EN ISO 22476-3 Geotechnical surveys and tests - Field tests - Part 3: Standard penetration test
TS EN ISO 22476-12 Geotechnical surveys and tests - Field tests - Part 12: Mechanical conical penetration test (cptm)
TS EN ISO 22476-3 / A1 Geotechnical surveys and tests - Field tests - Part 3: Standard penetration test
TS EN ISO 22476-2 / A1 Geotechnical surveys and tests - Field tests - Part 2: Dynamic probe test
TS EN ISO 22476-2 / A1 Geotechnical surveys and tests - Field tests - Part 2: Dynamic probe test
TS EN ISO 22476-3 / A1 Geotechnical surveys and tests - Field tests - Part 3: Standard penetration test
tst 3169 Piles, design, construction and application rules
TS 6169 CONSTRUCTION ENGINEERING SOIL TESTS - CHEMICAL TESTS - DETERMINATION OF ORGANIC SUBSTANCE CONTENT
TS EN ISO 22282-1 Geotechnical surveys and tests - Hydrogeological tests - Part 1: General rules 26.09.2013020
TS EN ISO 22282-2 Geotechnical surveys and tests - Hydrogeological tests - Part 2: Water permeability tests in boreholes using open systems
TS EN ISO 22282-3 Geotechnical surveys and tests - Hydrogeological tests - Part 3: Pressure water tests in rocks
TS EN ISO 22282-4 Geotechnical surveys and tests - Hydrogeological tests - Part 4: Pump tests
TS 1097 Urban roads - Planning and installation of infrastructure facilities
TS EN ISO 22282-1 Geotechnical surveys and tests - Hydrogeological tests - Part 1: General rules
TS EN ISO 22282-2 Geotechnical surveys and tests - Hydrogeological tests - Part 2: Water permeability tests in boreholes in open systems
TS EN ISO 22282-3 Geotechnical surveys and tests - Hydrogeological tests - Part 3: Pressure water tests in rocks
TS EN ISO 22282-4 Geotechnical surveys and tests - Hydrogeological tests - Part 4: Pump tests
TS 6172 Determination of cement content in hardened soil and cement mixtures
TS EN ISO 22282-5 Geotechnical surveys and tests - Hydrogeological tests - Part 5: Infiltrrometer tests
TS EN ISO 22282-6 Geotechnical surveys and tests - Hydrogeological tests - Part 6: Water permeability tests in boreholes in closed systems
TS 5744 Determination of the ground bearing capacity by plate loading test
TS 13593 In situ determination of California transport rate (CBR) on the ground
TSE CEN ISO / TS 22475-2 Geotechnical surveys and tests - Sampling methods and groundwater measurements - Part 2: Qualification criteria for organizations and persons
TSE CEN ISO / TS 22475-3 Geotechnical surveys and tests - Sampling methods and groundwater measurements - Part 3: Third party conformity assessment of organizations and persons
TSE CEN ISO / TS 17892-9 Geotechnical surveys and tests - Soil laboratory tests - Part 9: Consolidated triaxial pressure tests on water-saturated soils
TS EN ISO 22282-5 Geotechnical surveys and tests - Hydrogeological tests - Part 5: Filtration tests (ISO 22282-5: 2012)
TS EN ISO 22282-6 Geotechnical surveys and tests - Hydrogeological tests - Part 6: Water permeability tests using closed systems in the borehole (ISO 22282-6: 2012)
TS EN ISO 22476-1 Geotechnical surveys and tests - Field tests - Part 1: Electrical conical and piezoconic penetration test
TS EN ISO 22476-4 Geotechnical surveys and tests - Field tests - Part 4: Menard pressurometer test
TS EN ISO 22476-5 Geotechnical surveys and tests - Field tests - Part 5: Flexible dilatometer test
TS EN ISO 22476-7 Geotechnical surveys and tests - Field tests - Part 7: Jack test in borehole
TS EN ISO 22476-1: 2012 / AC Geotechnical surveys and tests - Field tests - Part 12: Electrical cone and piezocon penetration test
TS EN ISO 14688-2 Geotechnical surveys and tests - Definition and classification of soils - Part 2: Principles of classification
TS EN ISO 17892-3 Geotechnical investigations and tests - Soil laboratory tests - Part 3: Determination of grain density
tst CEN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
TSE CEN ISO / TS 17892-7 Geotechnical surveys and tests - Soil laboratory tests - Part 7: Uniaxial pressure test on fine-grained soils.
TS EN 1997-1 / A1 Eurocode 7: Geotechnical design - Part 2: General rules
TS EN ISO 14688-1 / A1 Geotechnical surveys and tests - Definition and classification of soils - Part 1: Description and description
Geotechnical surveys and tests - Definition and classification of soils - Part 14688: Principles of classification - TS EN ISO 2-1 / A2
TS EN 16228-1 Drilling and basic equipment - Safety - Part 1: General requirements
TS EN 16228-2 Drilling and basic equipment - Safety - Part 2: Mobile drilling rigs for geotechnical engineering, mines and mining
TS EN 16228-3 Drilling and basic equipment - Safety - Part 3: Equipment for horizontal directional drilling (BMS)
TS EN 16228-5 Drilling and basic equipment - Safety - Part 5: Walling equipment Diaphragm
TS EN 16228-6 Drilling and basic equipment - Safety - Part 6: Jetting, joint filling and injection equipment
TS EN 16228-7 Drilling and basic equipment - Safety - Part 7: Interchangeable auxiliary equipment
TS EN 16228-4 Drilling and basic equipment - Safety - Part 4: Foundation equipment
TS 1900-1 / T2 Soil laboratory tests in civil engineering - Part 1: Determination of physical properties
TS EN ISO 17892-1 Geotechnical surveys and tests - Soil laboratory tests - Part 1: Determination of water content
TS EN ISO 17892-2 Geotechnical studies and tests - Soil laboratory tests - Part 2: Determination of unit volume mass
TS EN ISO 17892-1 Geotechnical surveys and tests - Soil laboratory tests - Part 1: Determination of water content
TS EN ISO 17892-2 Geotechnical studies and tests - Soil laboratory tests - Part 2: Determination of unit volume mass
TS 6170 Soil tests in civil engineering - Chemical tests - Determination of sulphate content
TS EN 12699 Special geotechnical applications - Displacement piles
TS EN 14199 Special geotechnical applications - Mini piles
TS EN 1536 + A1 Special geotechnical applications drilling (bored) - Piles- (cast-on-site concrete piles)
TS EN 1538 + A1 Special geotechnical applications - Aperture walls
TS EN ISO 17628 Geotechnical surveys and tests - Geothermal tests - Determination of thermal conductivity of soil and rock using a tube heat exchanger
tst 2015104553 On-site soil control tests - Part 1: Determination of soil density and unit weight by sand cone method.
tst 2015104599 On-site soil inspection tests - Part 2: Determination of soil density by sliding roller
tst 2015104605 In situ soil control tests - Part 1: Determination of soil density and unit volume weight by rubber balloon method
tst 2015104606 In situ soil control tests - Part 4: Determination of soil and rock density in a test area by water filling
tst 2016106040 Soil laboratory tests - Part 11: Determination of minimum density and unit weight and calculation of relative density
TS 13745 Soil laboratory tests - Determination of maximum density and unit weight by vibrating table
TS 1900-1 / T3 Soil laboratory tests in civil engineering - Part 1: Determination of physical properties
TS EN ISO 22476-15 Geotechnical surveys and tests - Field tests - Part 15: Measurement during drilling
TS EN ISO 22477-10 Geotechnical studies and tests - Tests for geotechnical structures - Part 10: Tests for piles: rapid loading test
TS EN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
TS EN ISO 18674-2 Geotechnical surveys and tests - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along the line: Elongation meter
TSE CEN / TS 17006 Earthworks - Continuous Compaction Control (CCC)
TS EN ISO 17892-5 Geotechnical surveys and tests - Soil laboratory tests - Part 5: Odometer test by step loading
TS EN ISO 17892-6 Geotechnical studies and tests - Soil laboratory tests - Part 6: Falling cone test
TS EN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
TS 1900-2 / tst T2 Soil laboratory tests in civil engineering - Part 2: Determination of mechanical properties
TS EN 1537 Special geotechnical applications - Ground anchors
TS 1900-2 Soil laboratory tests in civil engineering - Part 2: Determination of mechanical properties
TS 1900-1 Soil laboratory tests in civil engineering - Part 1: Determination of physical properties
TS 1900-1 / T1 Soil laboratory tests in civil engineering-Part 1: Determination of physical properties
TS 1900-2 / T1 Soil laboratory tests in civil engineering-Part 2: Determination of mechanical properties
TS EN 1999-1-4 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS 2519 Wood shoring account, construction, maintenance dismantling and filling rules
TS 6171 Soil tests in civil engineering: Chemical tests to measure dissolved sulphate content in groundwater and groundwater
TS 7628 Reinforced concrete shoring - Calculation, construction, maintenance and dismantling rules
TS 7994 Ground bearing structures; Classification, characteristics and project design principles
TS 8443 Urban roads - Road infrastructure
TS 8615 Rocks - Determination of water content, density and porosity
TS 8853 Balance of slopes and slopes and calculation methods - On the ground
TS EN 12063 Walls made of sheet metal - Special geotechnical applications
TS EN 12716 Special geotechnical applications - Jet injection
TS EN 13331-1 Trench coating systems - Part 1: Product specifications
TS EN 14475 Special geotechnical applications - Reinforced fill
TS EN 14475 / AC Special geotechnical applications - Reinforced fill
TS EN 14653-1 Manual hydraulic shoring systems for floor reinforcement - Part 1: Product specifications
TS EN 14653-2 Manual hydraulic shoring systems for floor reinforcement - Part 2: Evaluation by calculation or test
TS EN 14679 Special geotechnical applications - Deep mixing
TS EN 14679 / AC Special geotechnical applications - Deep mixing
TS EN ISO 14688-1 / AC Geotechnical surveys and tests - Definition and classification of soils - Part 1: Description and description
TS EN 14731 Special geotechnical applications - Soil improvement with deep vibration
TS EN 15237 Special geotechnical applications - Vertical drainage
TSE CEN ISO / TS 17892-11 Geotechnical surveys and tests- Soil laboratory tests- Part 11: Determination of permeability by constant and falling level test method
TSE CEN ISO / TS 17892-7 Geotechnical surveys and tests- Soil laboratory tests- Part 7: Uniaxial pressure test on fine-grained soil
TSE CEN ISO / TS 17892-7 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 7: Uniaxial pressure test on fine-grained soil
TSE CEN ISO / TS 17892-8 Geotechnical surveys and tests- Soil laboratory tests- Part 8: Three-axis pressure test without consolidation and drainage
TSE CEN ISO / TS 17892-8 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 8: Three-axis pressure test without consolidation and drainage
TSE CEN ISO / TS 17892-9 Geotechnical surveys and tests- Soil laboratory tests- Part 9: Consolidation triaxial pressure test on water-saturated soil
TSE CEN ISO / TS 17892-10 Geotechnical surveys and tests- Soil laboratory tests- Part 10: Direct shear test
TSE CEN ISO / TS 17892-11 / AC Geotechnical surveys and tests - Soil laboratory tests - Part 11: Determination of permeability by constant and falling level test method
TSE CEN ISO / TS 17892-12 Geotechnical surveys and tests- Soil laboratory tests- Part 12: Determination of Atterberg limits
TSE CEN ISO / TS 17892-12 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 12: Determination of Atterberk limits