Our company performs the inspection and control of sewer systems and is concerned with the testing and certification services of all the standards listed below.
TS 1902 EN 588-1 Fiber cement pipes-Section for sewerage and drainage 1: Non-pressure pipes, joint fittings, joint special fittings
TS EN 13380 Sewerage and drainage systems - Outdoor - General characteristics of components used for repair and renovation
TS EN 588-2 Pipes - Made of fibrous cement - For drainage and sewage - Part 2: Inspection manholes and inspection chambers
TS EN 858-1 / A1 Separation systems for light liquids (such as oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
TS EN 13476-1 Plastic piping for non-pressurized underground drainage and sewerage systems - Polyvinylchloride (pvc-U) polypropylene (pp) and polyethylene (pe) based, profiled pipe systems - Part 1: General specifications and performance characteristics
TS EN 13476-2 Plastic pipelines for unpressurized underground drainage and sewerage systems - Polyvinylchloride (pvc-U) polypropylene (pp) and polyethylene (pe) based, profiled pipe systems - Part 2: Smooth internal and external surface and system specifications for pipes and fittings, type a
TS EN 13476-2 Plastic pipe systems - For unpressurized, underground drainage and sewage - Polyvinylchloride (pvc-U), polypropylene (pp) and polyethylene (pe) profiled pipe systems with no plasticizer added - part 2: Internal and external surfaces smooth specifications for type a pipes, fittings and system, Type A
TS EN 1917 / AC Concrete inspection chimneys and chambers - Unreinforced, steel fiber and reinforced
TS 821 EN 1916 / AC Concrete pipes and fittings - Unreinforced, steel fiber and reinforced
TS EN 1917 / AC Concrete inspection chimneys and chambers - Unreinforced, steel fiber and reinforced
TS EN 752 Drainage and sewerage systems - Outdoor
TS EN ISO 11296-7 Plastic piping systems for the repair of underground unpressurized discharge and sewer networks - Part 7: Coating with spiral wound pipes
TSE CEN / TS 13476-4 Plastic pipe systems - For unpressurized, underground drainage and sewage - Polyvinylchloride (pvc-U), polypropylene (pp) and polyethylene (pe) walls with no plasticizer added - Part 4 Conformity assessment guide
TS EN 14364 Plastic pipe systems - Unsaturated polyester resin (up) based - Glass fiber reinforced thermoplastic (ctp) - Used in pressurized or unpressurized drainage and sewage systems - Specification for pipes, fittings and connections
TS EN ISO 13260 Thermoplastic pipe systems for unpressurized underground drainage and waste water - Simultaneous temperature cycling and external load resistance test method
TSE CEN / TS 14632 Plastic pipe systems - Used in pressure and non-pressurized drainage and sewage systems - Unsaturated polyester resin (up) based glass reinforced thermoset plastics (grp) conformity assessment guide
TS EN ISO 11297-3 Plastic pipe systems - For the renovation of underground drainage and sewerage networks under pressure - Part 3: Laying with crimped pipes
TS EN ISO 11297-1 Plastic piping systems - For the renovation of underground drainage and sewerage networks under pressure - Part 1: General
TS EN 15383: 2012 + A1 Plastic pipe systems - Used in sewage and drainage systems - Polyester resin (up) based fiberglass reinforced thermoset plastics (GRP) - Manholes and inspection rooms
TSE CEN / TS 14807 Plastic piping systems - Glass fiber reinforced thermoset plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for structural analysis of buried GRP-UP pipelines
TSE CEN / TR 16626 Vitrified clay pipe systems for drainage and sewage - Guidance for voluntary third-party certification procedures
TS EN 16506 Systems for drainage and sewer regeneration - Priming with solid reinforced plastic inner layer (RAPL)
TSE CEN / TS 14632 Plastic pipe systems - pressurized and unpressurized; for drainage, sewage and water applications - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Conformity assessment guide
TS EN 1610 Construction and testing of sewerage and drainage systems
tst EN 14364 Plastic pipe systems - Unsaturated polyester resin (up) based - Glass fiber reinforced thermoplastic (ctp) - Used in pressurized or unpressurized drainage and sewer systems - Specification for pipes, fittings and connections
TS EN 14654-1 Control and management of operational activities in outdoor drainage and sewerage systems - Part 1: Cleaning
TS EN 13508-1 Inspection and evaluation of drainage and sewerage systems - Outdoor - Part 1: General requirements
TS EN 13508-2: 2003 + A1: 2011 Status of the main drainage and sewerage systems - Outdoor - Part 2: Visual inspection coding system
TSE CEN / TS 1852-2 Plastic pipe systems -Pressurized -Used for underground drainage and sewage systems -Polypropylene (pp) -Chapter 2: Conformity assessment guide
TS EN 13598-2: 2016 Plastic piping systems for non-pressurized underground drainage and sewerage systems - Non-plasticizing poly (vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: For manholes and inspection rooms features
TSE CEN / TS 14758-2: 2016 Plastic pipe systems - For unpressurized underground sewage and drainage - Polypropylene (pp-Md) containing mineral modifiers - Section 2: Guidance for assessment of conformity
TS EN 476: 2011 General specifications for elements used in sewage and drainage systems
TS EN 588-2 Pipes - Made of fibrous cement - For drainage and sewage - Part 2: Inspection manholes and inspection chambers
TS 821 EN 1916 Concrete pipes and fittings - Unreinforced, steel fiber and reinforced
TS EN 858-1 Separation systems for light liquids (eg oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
TS EN 1091 Sewerage systems - Outdoor - Vacuum
TS EN 1123-2 + A1 Pipes and fittings - Welded, hot-dip galvanized - Used in wastewater systems - Plug and spigot steel pipes - Part 2: Dimensions
TS EN ISO 1452-2 Plastic pipe systems - For drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (pvc-U) without plasticizer - Part 2: Pipes
TS EN ISO 1452-5 Plastic pipe systems - For drinking and potable water and for underground and surface pressure sewage systems - Part of polyvinyl chloride (pvc-U) without plasticizer 5: System suitability
TS EN 1671 Sewerage systems - Outdoor pressure
tst EN 1916 Concrete pipes and fittings - Reinforced, steel fiber and reinforced
TS EN 1917 Concrete inspection chimneys and chambers - Unreinforced, steel fiber and reinforced
tst EN 1917 Concrete inspection chimneys and chambers - Unreinforced, steel fiber and reinforced
TS 2171-3 ENV 1401-3 Plastic pipe systems -For unpressurized underground drainage and sewage -Plasticizer made of non-joined polyvinylchloride (pvc-U) -Chapter 3: Laying rules
TS 13492 Plastic pipes and fittings - Pvc-U, pp and pe pipes and fittings
TS EN ISO 11296-3: 2011 Plastic pipe systems for the renewal of underground pressure-free drainage and sewage lines - Part 3: Priming with tight-fitting pipes
TS EN ISO 11296-1: 2011 Plastic pipe systems for the renovation of underground pressure-free drainage and sewage lines - Part 1: General
TS EN 12666-1: 2005 + A1: 2011 Plastic pipe systems for non-pressurized groundwater and drainage - Polyethylene (pe) - Part 1: Specification for pipes, fittings and system
TS EN 12889 Inspection of trenchless drainage and sewer lines
TS EN 13476-3 + A1 / T1 Plastic pipe systems - For pressureless, underground drainage and sewage - Polyvinylchloride (PVC-U), polypropylene (pp) and polyethylene (pe) walls profiled pipe systems with no plasticizer added - Part 3: Interior for smooth pipes and profiled type b pipes, fittings and system features
TS EN 13476-3 + A1 Plastic pipe systems - For unpressurized, underground drainage and sewage - Polyvinylchloride (pvc-U), polypropylene (pp) and polyethylene (pe) walls with no plasticizer added - Part 3: Inner surfaces and pipes for profiled type b pipes, fittings and system
TS EN 13476-1 Plastic pipe systems - For unpressurized, underground drainage and sewage - Polyvinylchloride (pvc-U), polypropylene (pp) and polyethylene (pe) profiled pipe systems without plasticizers - Part 1: General specifications and performance characteristics
TS EN 13508-2: 2003 + A1: 2011 Status of the main drainage and sewerage systems - Outdoor - Part 2: Visual inspection coding system
TS EN 13598-1: 2010 Plastic pipe systems - For underground pressure-free drainage and waste water - Non-plasticizer poly (vinylchloride) (pvc-U), polypropylene (pp) and polyethylene (pe) - Part 1: Non-deep muyane elements Features for auxiliary elements including
TS EN 14457 Drainage and sewerage - Components specially designed for construction without ducting - General requirements
TS EN 14636-1 Plastic pipe systems for unpressurized drains and sewers - Polyester resin concrete (prc) - Part 1: Pipes and fittings with flexible connections
TS EN 14636-2 Plastic pipe systems - For drainage and sewage used in non-pressurized applications - Polyester resin concrete (prc) - Part 2: Man entrance holes and inspection rooms