Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards.
TS ISO 4520 Chromate coatings on electrolytic zinc and cadmium coatings
TS EN ISO 11125-1 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 1: Sampling
TS EN ISO 11125-4 Preparation of steel surfaces Test methods for metallic air abrasive blast cleaning prior to the application of paints and related materials Part 4: Determination of apparent density
TS EN ISO 11125-5 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 5: Determination of percentage of defective particles and microstructures
TS EN ISO 11125-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 6: Determination of foreign matter
TS EN ISO 11125-7 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 7: Determination of moisture
TS EN ISO 8502-5 (Formerly: TS ISO 5802-5) Preparation of steel surfaces - Surface cleaning evaluation tests before application of paint and related materials - Part 5: Chlorine measurement on steel surfaces prepared for painting (ion detection tube method)
TS 3181 EN ISO 3497 Metallic coatings - Coating thickness measurement - X-ray spectrometric methods
TS EN 10244-4 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 4: Tin coatings
TS EN ISO 11126-4 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for blast cleaning - Part 4: Coal furnace slag
TS EN ISO 11126-9 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 9: Staurolite
TS EN 10244-3 Steel wire and wire products - Non-ferrous metallic coatings on steel wire section 3: Aluminum coatings
TS EN 10244-4 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings
TS 3179 EN ISO 2177Metallic coatings - Coating thickness measurement - Coulometric method with anode dissolution
TS 2653 ISO 2747 Glassy and porcelain enamels - Enamel coated kitchen utensils - Thermal shock resistance determination
TS EN ISO 13807 (Former no: TS ISO 13807) Glass and porcelain enamels - Used in chemical industry - Determination of crack formation temperature by thermal shock test
TSE ISO / TR 8125 Aluminum and its alloys-Anodic oxidation (anodizing coating) -Color and color difference of anodic oxide coatings
TS ISO 6370-1 Glass and porcelain enamels-Determination of abrasion resistance-Part 1: Abrasion resistance tester
TS ISO 6370-2 Glass and porcelain enamels-Determination of abrasion resistance-Part 2: Mass loss after abrasion of the substrate
TS EN ISO 10111 Metallic and other inorganic coatings - Mass measurement in unit area - Review of gravimetric and chemical analysis methods
TS EN ISO 10289 Corrosion testing methods of metallic and other inorganic coatings on metallic substrates - Corrosion tests and ordering of manufactured parts (iso 10289: 1999)
TS EN ISO 10289 Corrosion testing methods of metallic and other inorganic coatings on metallic substrates - Corrosion tests and ordering of manufactured parts (iso 10289: 1999)
TS EN ISO 14923 Thermal spraying - Characterization and tests of thermally sprayed coatings
TS EN 10301 Steel pipes and fittings for onshore and offshore pipelines - Friction reducing inner lining for the transport of non-corrosive gas
TS EN 13887 Structural adhesives - Guide to surface preparation of metals and plastics before bonding
TS EN 10310 Steel pipes and fittings - For offshore and offshore pipelines - Polyamide powder-based inner and outer coatings
TS EN ISO 17834 Thermal spray-Coating for protection against corrosion and oxidation at high temperatures
TS EN 1395-2 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVof
TS EN ISO 8501-1 Preparation of steel base material surfaces - Before application of paint and related materials - Visual inspection of surface cleanliness - Part 1: Rust grades and degree of preparation of uncoated steel substrate surfaces and steel substrate surfaces after complete removal of previous coating
TS EN ISO 8501-3 Preparation of steel substrates before the application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation classes of welds, edges and other areas with surface defects
TS EN 15520 thermal spray - Recommendations for the structural design of components coated with thermal spray
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 12487 / AC Corrosion protection of metals - Washed and unwashed chromate conversion coatings on aluminum and aluminum alloys
TS EN ISO 1461 Hot-dip galvanized coatings on materials made of iron and steel - Properties and test methods
TS EN ISO 14713-1 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 1: General
TS EN 15771 Glass and porcelain enamels - Determination of surface hardness according to Mohs hardness scale
TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings
TS EN ISO 2143 Anodic oxidation of aluminum and aluminum alloys - Evaluation of the loss of absorbency of anodic oxidation coatings after pretreating with acid immersion
TS EN ISO 2931 Anodic oxidation of aluminum and aluminum alloys - Evaluation of the detection quality of anodic oxide coatings by measuring loss of admittance
TS EN ISO 3210 Aluminum and aluminum alloys - Anodic oxidation - Evaluation of the detection quality of anodic oxide coatings by mass loss measurement after immersion in phosphoric acid / chromic acid solution without acid pretreatment
TS EN ISO 7599 Anodic oxidation of aluminum and aluminum alloys - General properties for anodic oxidation coatings on aluminum
TS EN ISO 8502-11 Preparation of steel surfaces prior to application of paints and related products-tests for the assessment of surface cleanliness-part 11: field method for determining turbidity of water-soluble sulfate
TS EN ISO 6719 Anodic oxidation of aluminum and aluminum alloys - Part 12: Measurement of reflection characteristics of aluminum surfaces using integrating spherical devices
TS EN 62418 Semiconductor devices - Tension test of metal properties13.01.2011
TS EN ISO 2085 Anodic oxidation (anodizing) coating of aluminum and aluminum alloys Continuous control of thin anodic oxidation (anodizing) coatings - Copper sulfate test
TS EN ISO 2376 Anodic oxidation (anodizing) of aluminum and aluminum alloys - Determination of electrical puncture stress
TS EN ISO 8993 Anodic oxidation of aluminum and aluminum alloys (anodizing coating) - Classification systems for the assessment of hollow corrosion - Graphical method
TS EN ISO 10215 Anodic oxidation (anodizing coating) of aluminum and aluminum alloys - Visual determination of the image clarity of anodic oxidation coatings - Graphical scale method
TS EN ISO 14921 Thermal spraying - Thermal spray coating methods for machine elements
TS EN ISO 28762: 2010 Glass and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification
TS EN ISO 3613 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminum-Zinc alloy and zinc-Aluminum alloy - Test methods
TS EN ISO 26945 Metallic and other inorganic coatings - Electroplating tin cobalt alloy coatings
TS EN ISO 28721-1 Glass and porcelain enamels - Glass lined devices for processing plants - Part 1: Quality requirements for devices, components, articles and accessories
TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings
TS EN 13858 Corrosion protection of metals - Flake zinc plating on iron or steel components not electrolytically applied
TS EN ISO 28722 Glass and porcelain enamels - Properties of enamel coatings applied to steel plates used in architectural applications
TS EN ISO 28706-1 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 1: Determination of chemical corrosion resistance caused by acids at room temperature
TS EN ISO 28706-3 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 3: Determination of corrosion resistance caused by basic liquids - With hexagonal prism shaped tester
TS EN ISO 28706-5 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 5: Determination of chemical corrosion resistance in closed systems
TS EN 10245-1 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
TS EN 10245-2 Steel wire and wire products-Organic coatings on steel wire-Part 2: PVC coated wire
TS EN 10245-3 Steel wire and wire products - Organic coatings on steel wire - Part 3: Pe coated wire
TS EN 10245-5 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
TS EN ISO 2080 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Glossary
TS EN ISO 8503-1 Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of sandblasted steel substrates - Part 1: For the evaluation of abrasive blasted surfaces
TS EN ISO 8503-2 Preparation of steel base materials before the application of paint and related products-Surface roughness characteristics of sandblasted steel base materials- Part 2: Grade the surface profiles of abrasive blasted steel
TS EN ISO 8503-3 Preparation of steel base materials before applying paint-related products - Surface roughness characteristics of sandblasted steel base materials Section 3: Calibration and determination of surface profile of ISO surface profile compressors
TS EN ISO 8503-4 Preparation of steel base materials before application of paint and related products - Surface roughness characteristics of sandblasted steel base materials - Part 4: Calibration and determination of surface profile of Iso surface profile comparators
TS EN 10169: 2010 + A1Technical delivery conditions - Steel flat products continuously coated with organic material (roll coating)
TS EN 13523-20 Coil-coated metals - Test methods - Part 20: Foam adhesion
TS EN 13523-17 Coil-coated metals - Test methods - Part 17: Adhesive properties of peelable films
TS EN ISO 11127-1 Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 1: Sampling
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Determination of particle size distribution
TS EN ISO 11127-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for non-metallic abrasives used for spray cleaning - Part 6: Determination of water soluble impurities by conductivity measurement
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Moisture determination TS EN ISO 5-2011
TS EN ISO 11127-7 Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 7: Determination of water soluble chlorides
TS EN ISO 13123 Metallic and other non-organic coatings - Cycle heating test method for thermal boundary coatings in temperature gradient
TS EN 10244-1 / AC Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
TS EN ISO 9717: 2013 Metallic and other inorganic coatings - Phosphate conversion coatings in metals
TS EN ISO 10111 Metallic and other inorganic coatings - Mass measurement in unit area - Review of gravimetric and chemical analysis methods
TS EN 13603: 2013 Copper and copper alloys - Test methods for the evaluation of protective tin coatings on electrically drawn round copper wires
TS EN 13438 Paints and varnishes - Powder organic coatings for galvanized or powder zinc coated steel products for building purposes
TS EN ISO 27830 Metallic and other inorganic coatings - Basic principles for metallic and inorganic coating properties
TS EN ISO 27830 Metallic and other inorganic coatings - Basic principles for metallic and inorganic coating properties
Preparation of steel surfaces - Before the application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Determination of apparent density
TSE CEN / TS 16599 Photocatalysis - irradiation conditions for testing conductive material and measurement photocatalytic properties of these conditions
TS EN ISO 12671 Thermal spraying - Thermal spray coating - Symbolic representation on drawings
TS EN ISO 8502-9 Preparation of steel surfaces - Before the application of paint and related materials - Tests for the evaluation of surface cleanliness - Part 9: Field method for the determination of conductivity of water soluble salts
TS EN ISO 10683: 2014 Fasteners - Non-electrolytically applied zinc flake coatings
TS EN 13523-0 Roll-coated metals - Test methods - Part 0: General introduction
TS EN ISO 10683 Fasteners - Non-electrolytically applied zinc flake coatings
TS EN 14901 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile fittings and accessories (severe conditions) - Specifications and test methods
TS EN 14901 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile iron fittings and accessories (for severe conditions) - Rules and test methods
TS EN 13523-2 Roll-coated metals- Test methods - Part 2: Brightness
TS EN 13523-3 Roll-coated metals - Test methods - Part 3: Color difference - Instrumental comparison
TS EN 13523-25 Roll-coated metals- Test methods - Part 25: Resistance to moisture
TS EN 13523-26 Roll-coated metals - Test methods - Part 26: Resistance to water condensation
TS EN 13523-4 Roll-coated metals - Test methods - Part 4: Hardness of pencils
TS EN 10169: 2010 + A1Technical delivery conditions - Steel flat products continuously coated with organic material (roll coating)
TS EN ISO 3861 Rubber hoses - Specification for sand and sand blasting
TS EN 10245-2 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC coated wire
TS EN 4707: 2014 Aviation series - Acid cleaning of hexavalent chromium-free aluminum and aluminum alloys
TS EN ISO 12736 Oil and gas industries - Wet thermal insulation coatings for pipelines, drilling fluid lines and marine structures
TS EN ISO 14919 Thermal spraying - Wires, rods and cords for flaming and arc spraying - Classification - Technical delivery conditions
TS EN ISO 14920 Thermal spraying - Self-spraying and melting of pasted alloys (ISO 14920: 2015)
TS EN 13509 Cathodic protection measurement techniques
TS EN ISO 12736 Oil and gas industries - Wet thermal insulation coatings for pipelines, drilling fluid lines and marine structures
TS EN 13523-5 Roll-coated metals - Test methods - Part 5: Resistance to rapid deformation (tapping test)
TS EN 13523-7 Roll-coated metals - Test methods - Part 7: Resistance to cracking during bending (T-bending test)
TS EN 13523-13 Roll-coated metals - Test methods - Part 13: Resistance to heat accelerated aging
TS EN 13523-14 Roll-coated metals - Test methods - Part 14: Chalking (Helmen method)
TS EN 14462 Surface treatment equipment - Noise test code for surface treatment equipment including auxiliary handling equipment - Accuracy grades 2 and 3 "
TS EN ISO 4528 Glassy and porcelain enamelled products - Guidance for selecting test methods according to the glassy and porcelain enamelled parts of articles
TS EN 14462 Surface treatment equipment - Noise test code for surface treatment equipment including auxiliary handling equipment - Accuracy grades 2 and 3 "
TS ISO 10216 Metal oxide coatings - Aluminum and aluminum alloys coated with onadic oxidation (anodized) - Determination of the image quality of anodic oxidation coatings by instrument - Instrumental methods
TS ISO 9588 Metallic and other inorganic coatings - Post-coating treatment of iron or steel to reduce the risk of hydrogen brittleness
TS ISO 9588 Metallic and other inorganic coatings - Post-coating treatment of iron or steel to reduce the risk of hydrogen brittleness
TS ISO 9587 Metallic and other inorganic coatings - pre-treatment of iron or steel to reduce the risk of hydrogen brittleness
TS ISO 9587 Metallic and other inorganic coatings - pre-treatment of iron or steel to reduce the risk of hydrogen brittleness
TS ISO 8502-5 / T1 (Number Modification: TS EN ISO 8502-5) Preparation of steel surfaces - Surface cleaning evaluation tests before application of paint and related materials - Part 5: Chloride measurement on steel surfaces prepared for painting (ion detection tube method)
TS EN 13523-15 Roll-coated metals - Test methods - Part 15: Metamerism
TS 1385 ISO 2135 Anodic oxidation of aluminum and aluminum alloys (anodized coating) - Accelerated determination of light fastness of colored anodic oxide coatings using artificial light
TS EN 1395-3 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
TS EN 1395-4 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
TS EN 1395-5 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in the cell
TS EN 1395-6 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
TS EN 1395-7 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder supply systems
TS EN 1395-1 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements
TS EN ISO 1456 Metallic and other inorganic coatings - Nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium coatings with electrolytic accumulation
TS EN ISO 1460 Metallic coatings-Hot-dip galvanized coatings on iron-based materials-Gravimetric determination of mass per unit area
TS EN ISO 1463 Metallic and oxide coatings - Coating thickness measurement - Microscopic method
tst 1542 EN ISO 1463 Metallic and oxide coatings - Coating thickness measurement - Microscopic method
TS 1729 EN ISO 2064 Metallic and other organic coatings - Definitions and rules for thickness measurement
TS 1729 EN ISO 2064 Metallic and other organic coatings - Definitions and rules for thickness measurement
TS EN ISO 28723: 2011 Glass and porcelain enamels - Determination of edge coating on enamelled steel plate to be used in heat exchangers
TS 1885 ISO 2093 Electrolytic tin coatings - Properties and test methods
TS EN ISO 28763: 2011 Glass and porcelain enamels - Innovative, enamelled and packaged panels for air-gas and gas-gas heat exchangers - Specification
TS EN ISO 2081 Metallic and other inorganic coatings - Electrolytic zinc coatings with additional treatment on iron or steel
TS EN ISO 2082 Metallic and other inorganic coatings - Electrolytic cadmium coatings on iron or steel with additional treatment
TS EN ISO 2361 Electrolytic accumulation of nickel on magnetic and non-magnetic substrates-Coating thickness determination-Magnetic method
TS 2392 ISO 2179 Electrolytic tin nickel alloy coatings - Properties and test methods
TS 2674 EN ISO 2360 Insulating coatings on non-magnetic, conductive base materials - Measurement of coating thickness - Amplitude sensitive eddy current method
TS 2675 EN 12373-7 Aluminum and aluminum alloys - Anodic oxidation (anodizing coating) - Part 7: Quality assessment by measuring the loss of mass after dipping into acid phosphoric acid / chromic acid solution after pore closure of acid pretreated coatings
TS 2967 EN ISO 2063 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminum and their alloys
TS 2967 EN ISO 2063 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminum and their alloys
TS ISO 3160-1 Watch cases and accessories-Gold alloy finishes section 1: General principles
TS 3290 EN ISO 3868 Metallic coatings and other non-organic coatings-Measurement of coating thicknesses -Fizeau-Polychromatic radiation-Interferometry method
TS 3290 EN ISO 3868 Metallic coatings and other non-organic coatings-Measurement of coating thicknesses -Fizeau-Polychromatic radiation-Interferometry method
TS EN ISO 3543 / AC Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS EN ISO 3543 / AC Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS EN ISO 3882 Metallic and other inorganic coatings - comparison of thickness measurement methods
TS EN ISO 3882 Metallic and other inorganic coatings - comparison of thickness measurement methods
TS EN ISO 3892 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
TS 3982 EN ISO 2819 Metallic coatings on metallic surfaces - Electrolytic and chemical coatings - Examination of existing methods for adhesion testing
TS EN ISO 4518 Metallic coatings - Coating thickness measurement - Profilometric method
TS ISO 4519 Metallic and other inorganic coatings - Sampling for quality determination
TS ISO 4519 Metallic and other inorganic coatings - Sampling for quality determination
TS EN ISO 4521 Metallic and other inorganic coatings - Electrodeposition of silver and silver alloys for engineering purposes - Specifications and test methods
TS EN ISO 4524-3 Metallic coatings - Test methods for electrolytic gold and gold alloy coatings - Part 3: Electrographic tests for porosity
TS EN ISO 4524-6 Metallic coatings - Test methods for electroplating gold and gold alloy coatings - Part 6: Determination of residual salts
TS ISO 4525 - electrolytic coatings - on plastic materials - nickel plus chrome
TS EN ISO 4526 Metallic coatings - Electrolytic nickel coatings for engineering purposes
TS EN ISO 4527 Metallic coatings - Autocatalytic (electroless) nickel - Phosphorus alloy coatings - Properties and test methods
TS ISO 4530 Glass and porcelain enamelled articles - Determination of heat resistance
TS ISO 4532 Glass and porcelain enamels-Determination of impact resistance of enamelled articles-Gun test
TS EN ISO 4534: 2010 Glass and porcelain enamels-Determination of viscosity-Melt flow test
TS EN ISO 4536 Non-organic and metallic coatings on metallic base material-Corrosion test of saline solution droplets (tcd test)
TS EN ISO 4536 Non-organic and metallic coatings on metallic base material-Corrosion test of saline solution droplets (tcd test)
TS ISO 4539 Chromium coatings with electrolytic build-up - Electrolytic corrosion test (ec test)
TS EN ISO 4541 Metallic and other non-organic coatings - Corrodkote corrosion test (corr test)
TS EN ISO 4541 Metallic and other non-organic coatings - Corrodkote corrosion test (corr test)
TS EN ISO 4543 Metallic and other inorganic coatings - General rules for corrosion tests applicable in storage conditions
TS EN ISO 4543 Metallic and other inorganic coatings - General rules for corrosion tests applicable in storage conditions
TS EN ISO 6158: 2011 Metallic and other inorganic coatings - Chrome plated electrolytic accumulations for engineering purposes
TS 6503 EN ISO 4516 Metallic and other inorganic coatings - Vickers and knoop microhardness tests
TS EN ISO 6581: 2010 Anodizing coating of aluminum and aluminum alloys - Determination of comparative fastness to ultraviolet light and heat of colored anodizing coatings
TS ISO 7587 Tin - Electrolytically coated coatings of lead alloys - Properties and test methods
TS 7724 ISO 4524-2 Metallic coatings - Test methods for electroplating gold and gold alloy coatings - Part 2: Mixed gas flow (mfg) environmental tests
TS EN ISO 7759 Aluminum and aluminum alloys - Measurement of reflection characteristics of aluminum surfaces using a goniophotometer or limited goniophotometer
TS EN ISO 8289 Glass and porcelain enamels - Determination and location of defects - Low voltage test
TS ISO 8291 Glass and porcelain enamels-Determination of self-cleaning properties
TS EN ISO 8401 / tst AC Metallic coatings - Review of ductility measurement methods
TS EN ISO 8501-2 (Formerly: TS ISO 8501-2) Preparation of steel surfaces - Before application of paint and related materials - Visual inspection of surface cleaning - Part 2: Degree of preparation of coated steel substrates after partial removal of previous coating
TS EN ISO 8501-4 Preparation of steel substrates prior to application of paints and paint-related products - Evaluation of surface cleanliness - Part 4: Initial surface conditions in connection with high pressure water spray, preparation classes and abrasion classes
TS ISO 8501-2: 1999 / T1 (Number amendment, TS EN ISO 8501-2) Preparation of steel surfaces - Before application of paints and related materials - Visual inspection of surface cleaning - Part 2: Preparation of coated steel substrates after partial removal of previous coating degrees
TS EN ISO 8502-12 Preparation of steel substrates before the application of paints and related products - Tests for the evaluation of surface cleanliness - Part 12: Field methods for the titrimetric determination of water soluble iron (ii) ions
TS EN ISO 8504-1 Preparation of steel surfaces - Application of paints and related substances - Surface preparation methods - Part 1: General principles
TS EN ISO 8504-2 Preparation of steel surfaces - Before application of paint-related materials - Surface preparation methods - Part 2: Abrasive blast cleaning
TS EN ISO 8504-3 Preparation of steel surfaces - Surface cleaning methods before the application of paints and related materials - Part 3: Hand and power tool cleaning
TS EN ISO 9220 Metallic coatings-Coating measurement-Scanning electron microscopy method
TS 9258 EN ISO 6988 Other metallic and non-organic coatings - Sulfur dioxide test with general moisture condensation
TS 9258 EN ISO 6988 Other metallic and non-organic coatings - Sulfur dioxide test with general moisture condensation
TS EN 10244-3 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminum coatings
TS EN 10244-5 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel plating
TS EN 10244-6 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings
TS EN 10244-1 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
TS EN 10288 Steel pipes and fittings for onshore and offshore pipelines - Two-layer extruded polyethylene-based coatings
TS EN ISO 10289 Corrosion test methods of metallic and other inorganic coatings on metallic substrates - Corrosion tests and ordering of manufactured parts
TS EN ISO 10289 Corrosion test methods of metallic and other inorganic coatings on metallic substrates - Corrosion tests and ordering of manufactured parts
TS EN 10289 Steel pipes and fittings for onshore and offshore pipelines - External liquid epoxy and modified epoxy coatings
TS EN 10300: 2005 Steel pipes and fittings for coastal and offshore pipelines - Hot applied bituminous material for external coatings
TS EN 10301 Steel pipes and fittings for onshore and offshore pipelines - Friction reducing inner lining for the transport of non-corrosive gas
TS EN ISO 10308 Metallic coatings - Review of porosity tests
TS ISO 10309 Metallic coatings-Porosity tests-Ferroxil test
TS EN 10310 Steel pipes and fittings - for offshore and offshore pipelines - polyamide powder-based interior and exterior coatings
TS EN 10318 Determination of thickness and chemical composition of zinc and aluminum based metallic coatings - Routine method
TS EN 10339 Steel pipes - Used on land and sea pipelines - For corrosion protection, internal coating with epoxy applied liquid
TS EN ISO 10684 Fasteners - Hot-dip galvanized coatings
TS EN ISO 10684 / AC Fasteners - Hot-dip galvanized coatings
TS EN ISO 11124-1 Preparation of steel surfaces - Before the application of paint and related materials - Properties of metallic abrasives sprayed with compressed air section 1: General description and classification
TS EN ISO 11124-2 Metallic abrasives used with compressed air for the preparation of steel surfaces, the application of paints and the like part 2: Grits-Cast iron parts
TS EN ISO 11124-3 Preparation of steel surfaces - Before the application of paints and related materials - Properties of metallic abrasives sprayed with compressed air section 3: High carbon steel casting balls and grit
TS EN ISO 11124-4 Preparation of steel surfaces - Before the application of paints and related materials - Properties of metallic abrasives sprayed with compressed air section 4: Low carbon steel casting balls
TS EN ISO 11125-2 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 2: Particle size
TS EN ISO 11125-3 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 3: Determination of hardness
TS EN ISO 11126-10 (Formerly: TS ISO 11126-10) Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 10: Almandit garnet
TS EN ISO 11126-1 Preparation of steel surfaces - Before the application of paint-related materials - Properties of non-metallic abrasives used for spray cleaning - Part 1: General introduction and classification
TS EN ISO 11126-3 Preparation of steel surfaces - Before application of paint-related materials - Properties of non-metallic abrasives used for spray cleaning - Part 3: Refined copper slag
TS EN ISO 11126-6 Preparation of steel surfaces - Before the application of paint and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 6: Iron furnace slag
TS EN ISO 11126-7 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 7: Molten aluminum oxide
TS EN ISO 11126-8 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 8: Olivine sand
TS 11198 EN ISO 3543Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS 11198 EN ISO 3543 Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS 11348 EN 10240 Steel tubes - Internal and / or external protective coatings - Specification for hot-dip galvanized coatings applied in automated installations
TSE ISO / TR 11728 Aluminum and aluminum alloys coated with anodic oxidation (anodized) - Accelerated test for air resistance of colored anodic oxide coatings using cyclic artificial light and pollutant gas
TS EN 12068 Cathodic protection - Corrosion protection of buried or immersed steel pipelines with cathodic protection - External organic coatings - Tapes and shrinkable materials
TS EN 12487 Corrosion protection of metals - Washed and unwashed chromate conversion coatings on aluminum and aluminum alloys
TS ISO 12686 Metallic and other inorganic coatings - Preparation of metallic material surfaces as forging by automatic controlled metal particle spraying prior to nickel, autocatalytic nickel or chrome plating
TS EN ISO 12687 Metallic coatings - Porosity tests - Moist sulfur (sulfur flowers) test
TS EN ISO 12690: 2010 Metallic and other inorganic coatings - Thermal spray coordination - Duties and responsibilities
TS EN 12753 + A1 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety regulations
TS EN 13144 Metallic and other inorganic coatings - Quantitative measurement of adhesion by tensile test
TS EN 13144 Metallic and other inorganic coatings - Quantitative measurement of adhesion by tensile test
TS EN 13523-18 Roll-coated metals - Test methods - Part 18: Corrosion resistance
TS EN 13523-24 Coil-coated metals - Test methods - Part 24: Resistance to blocking and stamping
TS EN 13523-8 Roll-coated metals - Test methods - Part 8: Resistance to salt spray (fog)
TS EN 13523-27 Roll-coated metals - Test methods - Part 27: Resistance to moisture lapping (cataplasm test)
TS EN 13523-21 Roll-coated metals - Test methods - Part 21: Evaluation of exposed external panels
TS EN 13523-11: 2011 Coil-coated metals - Test methods - Part 11: Resistance to solvents (scrub test)
TS EN 13523-19: 2011 Coil-coated metals - Test methods - Part 19: Anel design and test method for exposure to atmospheric conditions
TS ISO 13805 / T1 (Number modification: TS EN ISO 13805) Glass and porcelain enamels-Used for coating of aluminum-Determination of the adhesion of enamel coatings on aluminum by the effect of electrolytic solutions (flaking test)
TS EN ISO 13805 (Former no: TS ISO 13805) Glass and porcelain enamels-Used for coating of aluminum-Determination of the adhesion of enamel coatings on aluminum by the effect of electrolytic solutions (flaking test)
TS EN 13887 Structural adhesives - guide to surface preparation of metals and plastics before bonding
TS EN 13957 Aluminum and aluminum alloys - Extruded round, rolled pipe - For general applications - Specifications
TS EN 14571b Metallic coating on non-metallic substrate - Coating thickness measurement - Micro-resistance method
TS ISO 14647 Metallic coatings - Determination of porosity of gold coatings on metal base materials - Nitric acid vapor test
TS EN ISO 14713-2 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 2: Hot dip galvanizing
TS EN ISO 14713-3 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN ISO 14713-3 / AC Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN 14879-1 Organic coating systems and primers for the protection of industrial devices and plants against corrosion caused by aggressive media
TS EN 14879-5 Organic coating systems and primers for the protection of industrial devices and plants against corrosion caused by corrosive environments - Part 5: Primers on concrete components
TS EN 14879-6 Organic coating systems and primers for the protection of industrial devices and plants against corrosion caused by corrosive environments - Part 6: Composite primers for tile and brick floors
TS EN 14879-2 Organic coating systems and coatings for the protection of industrial devices and plants against corrosion caused by corrosive media - Part 2: Coatings of metallic components
TS EN 14879-3 Organic coating systems and coatings for the protection of industrial devices and plants against corrosion caused by corrosive media - Part 3: Coatings of concrete components
TS EN 14879-4 Organic coating systems and primers for the protection of industrial devices and plants against corrosion caused by corrosive environments - Part 4: Primers on metallic components
TS EN ISO 14918 Thermal spraying-Applying test for thermal sprayers
TS EN ISO 14922-1 Thermal spray-Quality characteristics of heat-treated metal materials-Part 1: Selection and operating instructions
TS EN ISO 14922-2 Thermal spray-Quality characteristics of heat-treated metal materials-Part 2: Comprehensive quality characteristics
TS EN ISO 14922-3 Thermal spray-Quality properties of heat-treated metal materials-Part 3: Standard quality specifications
TS EN ISO 14922-4 Thermal spray-Quality characteristics of heat-treated metal materials-Part 4: Basic quality characteristics
TS EN ISO 14924 Thermal spraying - Finishing and finishing of thermal spray coatings
TS EN 15189 Ductile pipes, fittings and accessories - External polyurethane coating for pipes - Specifications and test methods
TSE ISO / TR 15235 Preparation of steel surfaces - before the application of paints and related products - Information on the effects of water-soluble salt pollution levels
TS EN 15339-2 Thermal spraying - Safety requirements for thermal spraying equipment - Part - 2: Gas control units
TS EN 15340 Thermal spraying - Determination of the shear load resistance of thermal spray coatings
TS EN 15646 Electrodeposited coatings - Electrodeposition of silver and silver alloys for engineering purposes - Specifications and test methods
TS EN 15648 Quality component for thermal spray-treatment
TS EN ISO 15695 Glass and porcelain enamels - Determination of scratch resistance of enamel products
TS EN ISO 15720 Metallic coatings - Porosity tests - Porosity by gelling electrography on gold or palladium coatings on metal substrates
TS EN ISO 15721 Metallic coatings - Porosity tests - Determination of porosity of sulphurous acid / sulfur dioxide in gold or palladium coatings
TS ISO 15730 Metallic and other inorganic coatings - Electrolytic polishing as a means of surface smoothing and passivation in stainless steel
TS EN 15773 Industrial application of hot-dip galvanized or striped steel materials (duplex systems) - Specifications, recommendations and guidance
TS EN ISO 16348 Metallic and other inorganic coatings - Terms and conditions of appearance
TS EN ISO 16348 Metallic and other inorganic coatings - Terms and conditions of appearance
TS EN ISO 17836 Thermal spraying - Determination of aggregate yield for thermal spraying (iso 17836: 2004)
TS EN ISO 18332 Metallic and other inorganic coatings - Recipes for porosity
TS EN ISO 21968 Non-magnetic metallic coatings on metallic and non-metallic base materials - Coating thickness measurement - Phase sensitive eddy current method
TS EN ISO 27874 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Properties and test methods
TS EN ISO 28721-3: 2011 Glass and porcelain enamels - Glass lined devices for processing plants - Part 3: Resistance to thermal shock
TS EN 29885 Glass containers - Wide rim - Deviation of the sealing top edge from the smoothness - Test methods