We carry out all your transactions in accordance with the requirements of the sector conditions and the standards below regarding the necessary regulations.
TS EN 20865 Table trays for projection welding machines
TS EN 20693 Seam welding disc draft dimensions
TS EN 29313 Resistance spot welding equipment - Cooling pipes
TS EN 27286 Resistance welding devices - Graphic symbols
TS EN 28167 Bulbs for welding-resistance welding
TS EN 25822 Spot welding equipment - Conical buffer gages and conical ring gages
TS EN 28206 Acceptance tests for oxygen cutting machines - Reachable accuracy - Operating characteristics
TS EN ISO 14744-4 Welding - Acceptance inspection of electron beam welding machines section 4: Measurement of welding speed
tst ISO 12176-3 Plastic pipes and fittings-Equipment for polyethylene systems with crimping connection-Part 3: Operator identification
TS EN 13622 Gas welding equipment-Terminology-Terms used in gas welding
TS EN ISO 7287 Graphic symbols for thermal cutting equipment
TS EN ISO 8205-1 Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and specifications for double conductor connection cables
TS EN ISO 8205-2 for resistance welding-Water-cooled secondary connection cables-Part 2: Dimensions and specifications for single-conductor connection cables
TS EN 730-1 Gas welding equipment - Safety devices - Part 1: Combined with a flame arrestor
TS EN 730-2 Gas welding equipment - Safety devices - Part 2: Without a flame arrestor
TS EN ISO 15616-2 Welding and cutting processes-High quality-Co2-Machines using laser beam-Acceptance tests- Part 2: Static and dynamic accuracy measurements
TS EN ISO 15616-3 Welding and cutting-High quality-Machines using Co2-Laser beam-Acceptance tests- Part 3: Calibration of instruments used to measure gas flow and pressure
TS EN ISO 15616-1 Welding and cutting-High-quality-Co2-Machines using laser beam-Acceptance tests- Part 1: General principles, acceptance requirements
TS EN 561 Gas welding equipment - Quick coupling with shut-off valve for welding, cutting and similar operations
TS EN 730-1 Gas welding equipment - Safety devices - Part 1: Combined with a flame arrestor
TS EN 730-2 Gas welding equipment - Safety devices - Part 2: Without a flame arrestor
TS EN ISO 15616-2 Welding and cutting processes-High quality-Co2-Machines using laser beam-Acceptance tests- Part 2: Static and dynamic accuracy measurements
TS EN ISO 15616-3 Welding and cutting-High quality-Machines using Co2-Laser beam-Acceptance tests- Part 3: Calibration of instruments used to measure gas flow and pressure
TS EN ISO 15616-1 Welding and cutting-High-quality-Co2-Machines using laser beam-Acceptance tests- Part 1: General principles, acceptance requirements
TS EN 561 Gas welding equipment - Quick coupling with shut-off valve for welding, cutting and similar operations
TS EN ISO 5172 Gas welding equipment - Torches for gas welding, heating and cutting - Features and tests
TS EN 50505 Basic standard for the assessment of human exposure to electromagnetic fields caused by equipment for resistance welding and alloy processing
TS EN 50504 Validation of arc welding equipment
TS EN ISO 5171 Gas welding equipment - Pressure gauges for welding, cutting and similar processes
TS EN ISO 2503 Gas welding equipment - Pressure regulators up to 300 bar (30 mpa) and pressure regulators with flowmeter - for gas cylinders for welding, cutting and similar works
TS EN ISO 7291 Gas welding equipment - Pressure regulators up to 300 mpa (300 bar) for manifold systems for welding, cutting and similar operations
TS EN 60974-12 Arc welding equipment - Part 12: Coupling devices for welding cables
TS EN 60974-13 Arc welding equipment - Part 13: Current return pliers
TS EN ISO 15609-5 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding
TS EN ISO 15011-5 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 5: Determination of thermal degradation during welding or cutting of organic material products in its composition using pyrolysis gas chromatography spectrometry
TS EN ISO 15614-1: 2004 / A2 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Gas and arc welding of steels, arc welding of nickel and nickel alloys
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 25239-2 Friction mixing welding - Aluminum section 2: Design of welding joints
TS EN ISO 25239-4 Friction mixing welding - Aluminum section 2: Characteristics and competence of welding processes
TS EN ISO 25239-5: Friction mixing welding - Aluminum section 2011: Clit and inspection characteristics
TS EN ISO 15614-13: Characteristics and characterization of welding procedures of metallic materials -Welding Procedure Tests- Part 2012: welding of butt and butt welding
TS EN 14587-3 Railway applications - Road - Butt and butt welding section of rails 3: Welding with passage structures
TS EN 13067 Plastic welding personnel-Welder qualification tests-Welded thermoplastic stages
TS EN ISO 15609-6: 2013 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Part 6: Laser-arc hybrid welding
TS EN ISO 15609-2 Specification and classification of welding procedures for metal materials-Welding procedure specification-Part 2: Gas welding
TS EN 14587-2 Railway applications - Road - Butt welding of rails - Part 2: Welding of new R220, R260, R260Mn and R350HT class rails on site with a mobile welding machine
TS EN ISO 15614-14: 2013 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steel, nickel and nickel alloys
TS EN 15085-1: 2007 + A1: 2013 Railway applications - Welding of railway vehicles and components - Part 1: General
TS EN ISO 12996 Mechanical connection - Destructive testing of connections - Sample dimensions and test procedure for tensile shear testing of single connections
TS EN ISO 9606-1 Welders qualification examination - Melting welding - Part 1: Steels
TS EN 14587-1 Railway applications-Welding of road-rails - Part 1: New R220, R260, R260Mn and R350HT class rails in a fixed installation
TS EN ISO 17677-1 Resistance welding - Terms - Section 1: Spot, projection and seam welding
TS EN ISO 14555 Welding - Stud arc welding of metallic materials
TS EN ISO 15614-12 Specification and specification of welding procedure for metallic materials -Welding procedure test-Section 12: Spot, seam and projection welding
TS EN ISO 25980 Welding and similar processes - Health and safety - Transparent welding curtains, strips and screens for arc welding
tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Sampling for emission rate determination and smoke particle analysis (ISO 15011-1: 2009)
EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide (CO2) during arc welding, cutting and gouging Determination of emission rates of (NO) and nitrogen dioxide (NO15011) (ISO 2-2009: XNUMX)
TS EN ISO 15011-4 / tst A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet (ISO 15011-4: 2006 / Amd 1: 2008)
TS EN 15594 Railway applications -Railway-Rails repair by electric arc welding
TS EN 14587-2 / D1 Railway applications - Road - Butt welding of rails - Part 2: Welding of new R220, R260, R260Mn and R350HT class rails on site with a mobile welding machine
TS EN ISO 14555 Welding - Stud arc welding of metallic materials
TS EN ISO 14373 Resistance welding - Procedure for spot welding of coated and uncoated low carbon steels
TSE CEN / TR 16862 Plastic welding personnel - Duties, responsibilities, knowledge, qualifications and competence
TS EN ISO 17658 Welding - Oxygen flame, laser beam and plasma cutting defects - Terms
TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules
TS EN ISO 18278-2 Resistance welding - Weldability - Part 2: Evaluation procedure for weldability in spot welding
TSE CEN / TS 16892 Plastics - Welding of thermoplastics - Properties of welding method
TS EN ISO 15614-8 Specification and classification of welding procedures for metal materials-Welding test procedure-Section 8: Pipe welding for pipe plate joints
TS EN ISO 17916 Safety of thermal cutting machines
TS EN ISO 11970: 2016 Compliance and specification of welding procedures for welding of steel castings
TS EN ISO 9692-3: 2016 Welding and similar processes - Recommendations for welding nozzle preparation - part 3: Metal inert gas welding and tungsten inert gas welding of aluminum and its alloys
TS EN ISO 15614-7 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 7: Coating welding
TS EN ISO 9013 Thermal cutting - Classification of thermal cuts - Geometric product specifications and quality tolerances
TS EN 1011-4 Welding - Recommendations for welding metallic materials - Part 4: Arc welding of aluminum and aluminum alloys
TS EN 1011-5 Welding - Recommendations for welding metallic materials - Part 5: Welding of clad steels
TS EN 1011-6 Welding - Recommendations for welding metallic materials - Part 6: Laser beam welding
TS EN 1011-7 Welding - Recommendations for welding metal materials - part 7: Welding by electron beam welding
TS EN 1011-8 Welding - Recommendations for welding metal materials - part 8: Welding of cast iron "
TS EN 1011-1 Welding-Recommendations for welding metallic materials-Part 1: General guide for arc welding
TS EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for the analysis of smoke particles
tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for analysis of smoke particles
TS EN ISO 3834-2 Quality requirements for fusion welding of metallic materials - part 2: Comprehensive quality requirements
TS EN ISO 3834-1 Quality requirements for fusion welding of metallic materials - part 1: Criteria for selecting the appropriate level of quality requirements
TS 6868-3 EN ISO 9606-3 Qualification examination of welders - Melting welding - Part 3: Copper and copper alloys
TS 6868-4 EN ISO 9606-4 Welders qualification examination - Melting welding - Part 4: Nickel and nickel alloys
TS 6868-5 EN ISO 9606-5 Welders qualification examination - Melting welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
TS 8414 EN 14163 Oil and gas industries - Pipeline transport systems - welding of pipelines
TS EN ISO 9606-2 Welders qualification examination - Melting welding - part 2: Aluminum and aluminum alloys
TS EN ISO 14327 Resistance welding - Weldability slice determination procedures for resistance point, projection, seam welding
TS EN 14587-1 Rail applications - Road - Butt and fusible welding section of rails 1: New r220, r260, r260mn and r350h class rails
TS EN 14587-2 Railway applications-Road- Butt and butt welding section of rails
TS EN 14610 Welding and related processes - Descriptions of metal welding processes23.11.2006
TS EN 14730-1 Railway applications - Railway - Alumino thermal welding of rails - Part 1: Approval of welding processes
TS EN 14730-2 Railway applications - Ventilation for urban and suburban towing and towing vehicles - Part 2: Qualification of Alumino thermal welders, approval of contractors and acceptance of resources
TS EN 14730-1 + A1: 2010 Railway applications - Railway - Alumino thermal welding of rails - Part 1: Approval of welding processes
TS EN ISO 15011-4 / A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet
TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 3: Determination of ozone concentration using fixed point measurements during arc welding
TS EN 15085-2 Railway applications - Welding of railway vehicles and components - Part 2: Quality characteristics and certification of the welding manufacturer
TS EN 15085-3 / AC Railway applications-Supply of railway vehicles and components-Section 3: Design specifications
TS EN 15085-5 Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
TS EN 15085-3 Railway applications-Supply of railway vehicles and components-Section 3: Design features
TS EN 15594 Railway applications -Railway-Rails repair by electric arc welding
TS EN ISO 15607 Specification and specification of welding procedure for metallic materials -General rules
TS EN ISO 15609-1 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
TS EN ISO 15609-3 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding
TS EN ISO 15609-4 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Section 4: Laser beam welding
TS EN ISO 15610 Specification and specification of welding procedures for metallic materials - Characterization based on tested welding consumables
TS EN ISO 15611 Specification and specification of welding procedures for metallic materials - Characterization based on previous welding experience
TS EN ISO 15612 Specification and specification of welding procedures for metallic materials - Characterization by adopting a standard welding procedure
TS EN ISO 15613 Specification and specification of welding procedures for metallic materials - Characterization based on pre-manufacture welding test
TS EN ISO 15614-4 Specification and specification of welding procedure for metallic materials -Welding procedure test-Section 4: Finishing welding of aluminum castings
TS EN ISO 15614-11 Specification and specification of welding procedures for metallic materials - Welding procedure test - part 11: Electron and laser beam welding
TS EN ISO 15614-4 / AC Welding procedure specification and qualification for metallic materials -Welding procedure test-Part 4: Finishing welding of aluminum castings
TS EN ISO 15614-3 Specification and classification of welding procedures for metal materials-Welding test procedure-Section 3: Melt welding of non-alloy and low alloy cast irons
TS EN ISO 15614-10 Specification and specification of welding procedure for metallic materials -Welding procedure test-Part 10: Hyperbaric dry welding
TS EN ISO 15614-6 Specification and specification of welding procedure for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 15614: Arc welding of aluminum and its alloys TS EN ISO 2-2
TS EN ISO 15620 Welding - Friction welding of metallic materials
TS EN ISO 16432 Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using inflated projections
TS EN ISO 16433 Resistance welding - Procedure for resistance welding of coated and uncoated low carbon steels.
TS EN ISO 17652-1 Welding - Workshop test book on welding and related processes - Part 1: General requirements
TS EN ISO 17652-2 Welding - Workshop test book on welding and related processes - Part 2: Welding characteristics of the workshop
TS EN ISO 17652-3 Welding - Workshop test book on welding and related processes - Part 3: Thermal cutting
TS EN ISO 17652-4 Welding - Workshop test for welding and related processes - Part 4: Smoke and gas emission
TS EN ISO 17657-1 Resistance welding - Welding current measurement for resistance welding - Part 1: Measurement guide
TS EN ISO 17657-3 Resistance welding - Welding current measurement for resistance welding - Part 3: Current-sensing coil
TS EN ISO 17657-5 Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of the welding current measuring system
TS EN ISO 17657-2 Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil
TS EN ISO 17660-2 Welding - Welding of reinforced steels - Part 2: Welded joints not subject to load
TS EN ISO 17660-1 Welding - Welding of reinforced steels - Part 1: Welded joints under load
TS EN ISO 18594 Resistance point - Projection and seam welding - Method for determination of transition resistance on aluminum and sheet materials
TS EN ISO 18595 Resistance welding-Spot welding of aluminum and aluminum alloys-Weldability, welding and tests