All the standards mentioned below are tested, inspected and inspected by us and we provide fast and reliable certification services based on customer satisfaction.
TS EN 20865 Table trays for projection welding machines
TS EN 20693 Seam welding disc draft dimensions
TS EN 29313 Resistance spot welding equipment - Cooling pipes
TS EN 27286 Resistance welding devices - Graphic symbols
TS 9316 EN 25827 Spot welding - Electrode backings and electrode holders
TS 9118 EN 21089 Spot welding equipment conical electrode connections-Dimensions
TS EN 28167 Bulbs for welding-resistance welding
TS EN 25822 Spot welding equipment - Conical buffer gages and conical ring gages
TS EN 28206 Acceptance tests for oxygen cutting machines - Reachable accuracy - Operating characteristics
TS EN 22857 Grinded thread guides for iso metric threads Tolerance classes 4h to 8 h and 4g to 6g Manufacturing tolerances of threaded part
TS EN ISO 13916 Welding-preheating temperature, transition temperature between passes and measuring guide for preheating maintenance temperature during welding
TS EN ISO 9455-3 Soft soldering powders-Test methods-Part 3: Determination of acid number by potentiometric and visual titration methods
TS ISO 4520 Chromate coatings on electrolytic zinc and cadmium coatings
TS 7820 ISO 296 Machine tools - Tool taper - Self-taper taper - Dimensions for taper shank tools
TS ISO 8540 Presses - Mechanical - Open front - Terms
TS EN 25967 Guides and threading-Symbols and terminology of the main types
TS EN 50059 Properties of electrostatic hand spray equipment used in non-flammable material during painting and surface treatment
TS EN 50109-1 Compaction tools - Tools for the termination of electrical cables and wires for low frequency and radio frequency applications - Part 1: General specifications and tests
TS EN 50109-2-3 Compression hand tools - Electrical part for low frequency and radio frequency applications 2-3: Special requirements for contacts of electrical connectors
TS EN 50109-2-5 Compression hand tools - Tools for the termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for termination of biaxial cable for bus applications
TS EN ISO 11125-1 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 1: Sampling
TS EN ISO 11125-4 Preparation of steel surfaces Test methods for metallic air abrasive blast cleaning prior to the application of paints and related materials Part 4: Determination of apparent density
TS EN ISO 11125-5 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 5: Determination of percentage of defective particles and microstructures
TS EN ISO 11125-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 6: Determination of foreign matter
TS EN ISO 11125-7 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 7: Determination of moisture
TS EN 45510-8-1 Power plants - Supply guide for equipment part 8-1: Control operation, measuring, setting and control devices
TS EN 12814-1 Semi-finished thermoplastic materials-Tests of welded joints-Part 1: Bending test
TS EN 12814-2 Semi-finished thermoplastic materials-Welded joint tests-Part 2: Tensile test
TS EN 1011-3 Welding - Recommendations for welding metallic materials - Part 3: Arc welding of stainless steels
TS EN 1011-4 Welding - Recommendations for welding metallic materials - Arc welding of aluminum and aluminum alloys
TS EN 12814-5 Semi-finished thermoplastic materials-Tests of welded joints-Part 5: Macroscopic examination
TS EN 13134 Soldering - Process approval
TS EN 1708-2 Welding - Basic welding joint details - Part 2: Parts without internal pressure
TS EN ISO 10882-2 Health and safety in welding and related processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
TS EN ISO 14744-4 Welding - Acceptance inspection of electron beam welding machines section 4: Measurement of welding speed
TS EN ISO 15620 Welding - Friction welding of metallic materials
TS EN ISO 8502-5 (Formerly: TS ISO 5802-5) Preparation of steel surfaces - Surface cleaning evaluation tests before application of paint and related materials - Part 5: Chlorine measurement on steel surfaces prepared for painting (ion detection tube method)
TS EN 12417 + A2 Machine tools - Safety - Machining centers
tst EN 1539 Dryers and ovens - with flammable materials - Safety regulations
TS 3181 EN ISO 3497 Metallic coatings - Coating thickness measurement - X-ray spectrometric methods
TS EN 10244-4Steel and wire products - Non-ferrous metal coatings on steel wire - Part 4: Tin coatings
TS EN ISO 11126-4 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for blast cleaning - Part 4: Coal furnace slag
TS EN ISO 11126-9 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 9: Staurolite
TS EN 1011-2 Welding - Recommendations for the welding of metallic materials section 2: Arc welding of ferritic steels
TS EN 1011-3 Welding - Recommendations for the welding of metallic materials section 3: Arc welding of stainless steels
TS EN 746-5 Industrial heat treatment equipment - Part 5: Particular safety requirements for salt bath heat treatment equipment
TS EN 746-8 Industrial heat treatment equipment - Part 8: Particular safety requirements for quenching equipment
tst ISO 12176-3 Plastic pipes and fittings-Equipment for polyethylene systems with crimping connection-Part 3: Operator identification
TS EN ISO 11064-1 Ergonomic design of control centers - Part 1: Control center design principles
TS EN ISO 11064-2 Ergonomic design of control centers - Part 2: Control room arrangement principles
TS EN 1011-2 Welding - Recommendations for the welding of metallic materials - Part 2: Arc welding of ferritic steels
TS EN 10244-3 Steel wire and wire products - Non-ferrous metallic coatings on steel wire section 3: Aluminum coatings
TS EN 10244-4 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings
TS EN 60216-4-2 Insulating electrical materials - Thermal resistance properties - Part 4-2: Precise aging furnaces for use up to 300 c
TS EN 60216-4-3 Insulating electrical materials - Thermal resistance properties - Part 4-3: Aging furnaces multicellular furnaces
TS EN 61131-5 Programmable controllers - Part 5: Communication
TS EN 61131-7 Programmable controllers - Part 7: Frost control programming
TS 3179 EN ISO 2177Metallic coatings - Coating thickness measurement - Coulometric method with anode dissolution
TS EN 13622 Gas welding equipment-Terminology-Terms used in gas welding
TS EN 61190-1-1 Fastening materials for electronic systems - Part 1-1: Specification for soldering pastes used for high quality interconnections in electronic systems
TS EN 10288 Steel pipes and connections for coastal and offshore pipelines - Extruded polyethylene coatings with external two layers
TS EN ISO 7287 Graphic symbols for thermal cutting equipment
TS EN ISO 8205-1 Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and specifications for double conductor connection cables
TS EN ISO 8205-2 for resistance welding-Water-cooled secondary connection cables-Part 2: Dimensions and specifications for single-conductor connection cables
TS EN 61514 Industrial process control systems - Methods for evaluating the performance of valve positioners with pneumatic outputs
TS EN ISO 13919-2 Welding-Electron and laser-welded joints-Guidance on quality levels of defects-Section 2: Aluminum and weldable alloys
TS EN ISO 14272 Process and sample sizes for resistance to spot and projection welding
TS EN ISO 15614-8 Specification and classification of welding procedures for metal materials-Welding test procedure-Section 8: Pipe welding for pipe plate joints
TS EN ISO 15614-11 Specification and classification of welding procedures for metal materials-Weld test procedure-Section 11: Welding with electron and laser beam (iso 15614-11: 2002)
TS EN ISO 15618-2 Classification test of welders submerged under water - Part 2: Submersible welders and welding operators performing dry welding under high pressure
TS EN ISO 15641 Milling cutters for high-speed machining - Safety regulations
TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3: 2009)
TS 2653 ISO 2747 Glassy and porcelain enamels - Enamel coated kitchen utensils - Thermal shock resistance determination
TS EN ISO 13807 (Former no: TS ISO 13807) Glass and porcelain enamels - Used in chemical industry - Determination of crack formation temperature by thermal shock test
TSE ISO / TR 8125 Aluminum and its alloys-Anodic oxidation (anodizing coating) -Color and color difference of anodic oxide coatings
TS 9531 ISO 3857-3 Compressors, pneumatic tools and machines-Terms-Part 3: Pneumatic tools and machines
TS ISO 6370-1 Glass and porcelain enamels-Determination of abrasion resistance-Part 1: Abrasion resistance tester
TS ISO 6370-2 Glass and porcelain enamels-Determination of abrasion resistance-Part 2: Mass loss after abrasion of the substrate
TS EN 61190-1-1 Fastening materials for electronic assembly - part 1-1: Characteristics of solder paste used for high quality interconnections in electronic assemblies
TS EN 50370-2 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
TS EN 12814-7 Semi-finished thermoplastic materials - Tests of welded joints - Part 7: Tensile test with shrunken test specimens
TS EN ISO 10111 Metallic and other inorganic coatings - Mass measurement in unit area - Review of gravimetric and chemical analysis methods
TS EN 730-1 Gas welding equipment - Safety devices - Part 1: Combined with a flame arrestor
TS EN 730-2 Gas welding equipment - Safety devices - Part 2: Without a flame arrestor
TS EN ISO 8166 Resistance welding - Procedure for evaluating the life of the resistance spot welding electrodes using fixed machine settings
TS EN ISO 9606-3 Welders qualification examination - Melting welding - Part 3: Copper and copper alloys
TS EN ISO 15616-2 Welding and cutting processes-High quality-Co2-Machines using laser beam-Acceptance tests- Part 2: Static and dynamic accuracy measurements
TS EN ISO 15616-3 Welding and cutting-High quality-Machines using Co2-Laser beam-Acceptance tests- Part 3: Calibration of instruments used to measure gas flow and pressure
TS EN ISO 9606-4 Welders qualification examination - Melting welding - Part 4: Nickel and nickel alloys
TS EN ISO 9606-5 - Approval test of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
TS EN ISO 10289 Corrosion testing methods of metallic and other inorganic coatings on metallic substrates - Corrosion tests and ordering of manufactured parts (iso 10289: 1999)
TS EN ISO 10289 Corrosion testing methods of metallic and other inorganic coatings on metallic substrates - Corrosion tests and ordering of manufactured parts (iso 10289: 1999)
TS EN ISO 12224-3 Solder wire, solid and flux cored
TS EN 12814-7 Semi-finished thermoplastic materials-Welded joint tests-Part tensile test with 7-Oval test pieces
TS EN ISO 14324 Resistance spot welding - Destructive welding of welds - Fatigue testing method of spot welded joints
TS EN ISO 14329 Resistance welding - Destructive welding of welds - Failure types and geometric measurements for spot, seam and projection welds
TS EN 50370-2 Electromagnetic compatibility (emu) - Product family standard for machine tools - Part 2: Immunity
TS EN ISO 14923 Thermal spraying - Characterization and tests of thermally sprayed coatings
TS EN ISO 15616-1 Welding and cutting-High-quality-Co2-Machines using laser beam-Acceptance tests- Part 1: General principles, acceptance requirements
TS EN ISO 9692-4 Welding and similar processes - Recommendations for the welding nozzle - Part 4: Clad steels
TS EN 10301 Steel pipes and fittings for onshore and offshore pipelines - Friction reducing inner lining for the transport of non-corrosive gas
TS EN 13887 Structural adhesives - Guide to surface preparation of metals and plastics before bonding
TS EN 14612 Space product guarantee - Validation and approval of automatic machine wave soldering
TS EN 561Gas welding equipment - Quick coupling with shut-off valve for welding, cutting and similar operations
Safety rules - For electrical appliances used in household and similar areas - Part 60335-2: Particular requirements for electrical portable heating appliances and similar appliances
TSE CEN ISO / TS 8662-11 Portable hand tools with motor- Measurement of vibrations in the handle - Part 11: Nailing tools
TS EN 10310 Steel pipes and fittings - For offshore and offshore pipelines - Polyamide powder-based inner and outer coatings
TS EN ISO 15607 Specification and specification of welding procedure for metallic materials -General rules
TS EN ISO 15614-5 Welding procedure specification and qualification for metallic materials -Welding procedure test-Part 5: Arc welding of titanium, zirconium and its alloys
TS EN ISO 17641-1 Destructive tests on welds in metallic materials-Hot crack tests for welded structures
TS EN ISO 17834 Thermal spray-Coating for protection against corrosion and oxidation at high temperatures
TS EN ISO 18279 Brazing-Defects in brazed joints
TS 283-1 EN ISO 17642-1Destructive testing of welds in metal materials - Cold cracking tests of welded structures - Arc welding processes - Part 1: General
283-2 EN ISO 17642-2 Destructive testing of welds in metal materials - Cold cracking tests of welded structures - Arc welding processes - Part 2: Self-tensioning tests
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method
TS EN ISO 15614-2 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminum and its alloys
TS EN ISO 15614-1 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Gas and arc welding of steels, arc welding of nickel and nickel alloys
TS EN 13479 Welding consumables - Fillers and fluxes for fusion welding of metallic materials - General product standard
TS EN 50370-1 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
TS EN 746-4 Industrial heat treatment equipment - Part 4: Particular safety requirements for hot-dip galvanized heat treatment equipment
TS EN 746-5 Industrial heat treatment equipment - Part 5: Particular safety requirements for salt bath industrial heat treatment equipment
TS EN 746-8 Industrial heat treatment equipment - Part 8: Particular safety requirements for refrigeration equipment
TS EN 60519-8 Safety in electric heating installations - Part 8: Particular requirements for electric slag melting furnaces.
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 14717 Welding and similar processes - Environmental inspection list
TS EN 560 Gas welding equipment - Pipe connections for equipment for welding, cutting and the like
TS EN 60519-3 Safety in electrical thermal installations - part 3: Special requirements for induction and conduction heating and induction melting installations
TS EN 60779 Industrial electric heating equipment - Test methods for electric slag melting furnaces
TS EN ISO 15609-2 / A1 Specification and classification of welding procedures for metal materials-Welding procedure specification-Part 2: Gas welding
TS EN 1011-4 / A1 Welding - Recommendations for welding of metallic materials - Arc welding of aluminum and aluminum alloys
TS EN ISO 3834-1 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements
TS EN ISO 3834-2 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
TS EN ISO 3834-3 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality markings
TS EN ISO 3834-4 Quality requirements for the melting of metallic materials - Part 4: Basic quality requirements
TS EN ISO 8502-6 Preparation of steel surfaces - Surface cleaning assessment tests before application of paint and related materials - Part 6: Extraction of soluble impurities for analysis - Bresle method
TS EN ISO 15023-1 Plastic - Poly (vinyl alcohol) (pval) materials - Part 1: Basics for short demonstration systems and features
TS EN 60216-4-1 Electrical insulation materials - Thermal resistance properties - Part 4-1: Aging ovens - Single cell ovens
TS EN ISO 3834-4 Quality requirements for the melting of metallic materials - Part 4: Basic quality requirements
TS ISO 11126-9 (Number modification: TS ISO 11126-9) Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 9: Staurolit
TS ISO 11126-10 / T1 (Number modification: TS EN ISO 11126-10) Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 10: Almandit garnet
TS EN ISO 18276 Welding consumables - Tubular flux cored wire electrodes for high-strength steels with or without gas shielding - Classification
TS EN ISO 3834-3 Quality requirements for fusion welding of metallic materials - part 3: Standard quality requirements
TS EN 60519-3 Safety in electrical heating installations - Part 3: Particular requirements for induction, resistance heating and induction melting installations
TS EN ISO 15614-1 Specification and approval of welding procedures of metallic materials-Welding procedure test-Section 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys Welding procedure tests of steels for arc welding
TS EN ISO 15614-2 Specification and approval of welding procedures for metallic materials-Welding procedure test-Part 2: Arc welding of aluminum and its alloys
tst EN 10300 Steel pipes and fittings for coastal and offshore pipelines - Hot applied bituminous material for external coatings
TS ISO 4229 Mounting tools for screws and nuts - One-sided open-end wrenches for low torque applications - Maximum head external dimensions and test torque
TS ISO 11168 Snap switches for spark plugs and glow plugs
TS EN 60216-4-1 Electrical insulation materials - Thermal resistance properties - Part 4-1: Aging ovens - Single cell ovens
TS EN ISO 14731 Resource coordination - Tasks and problems.
TS EN 60519-2 Safety in electrical heating installations - Part 2: Particular requirements for resistance heating devices
TS EN 62076 Industrial electrical heating systems - Test methods for ducted and ladle induction furnaces
TS EN ISO 5172 Gas welding equipment - Torches for gas welding, heating and cutting - Features and tests
TS EN 10339 Steel pipes for water transport-Epoxy resin coating applied for internal insulation corrosion protection
TS EN 1395-2 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVof
TS EN ISO 8501-1 Preparation of steel base material surfaces - Before application of paint and related materials - Visual inspection of surface cleanliness - Part 1: Rust grades and degree of preparation of uncoated steel substrate surfaces and steel substrate surfaces after complete removal of previous coating
TS EN 62339-1 Modular component interfaces for surface-mounted liquid distribution components - Part 1: Elastic seals
TS EN ISO 6520-1 Welding and related processes - Classification of geometric defects in metallic materials - Part 1: Melting welding
TS EN ISO 8501-3 Preparation of steel substrates before the application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation classes of welds, edges and other areas with surface defects
TS EN 15520 thermal spray - Recommendations for the structural design of components coated with thermal spray
TS EN ISO 17657-4 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system
TS EN 15085-2 Railway applications-Welding of railway vehicles and components-Part 2: Quality specifications and certification of welding manufacturers
TS EN 15085-4 Railway applications-Supply of railway vehicles and components-Section 4: Manufacturing specifications
TS EN 60519-11 Safety in electronic heating installations - Part 11: Particular requirements for installations using electromagnetic forces on liquid metals
TS EN ISO 15614-1 / A1 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and arc welding of steels, arc welding of nickel and nickel alloys - additional 1: 15614: 1)
TS ISO 5414-1 Tool holders-With fixing bolt-For cylindrical shank and end mills- Part 1: Dimensions of the drive section
TS EN ISO 14731 Resource coordination - Duties and responsibilities
TS EN 60335-2-45 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-45: Particular requirements for electric portable heating appliances and similar appliances
TS EN 1550 + A1 Machinery - Safety of machine parts - Safety rules for the design and construction of mirror legs that hold the workpiece
TS EN 10111 Steel strip and strip - Continuous hot rolled for cold forming - Low carbon - Technical delivery conditions
TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules
TS EN 50505 Basic standard for the assessment of human exposure to electromagnetic fields caused by equipment for resistance welding and alloy processing
TS EN 792-13 + A1 Hand-held tools - Electrically driven - Safety regulations - Part 13: Tying saws, fastening tools
TS EN 792-13 + A1 Hand-held tools - Electrically driven - Safety regulations - Part 13: Tying saws, fastening tools
TS EN 1550 + A1 Machinery - Safety of machine parts - Safety rules for the design and construction of mirror legs that hold the workpiece
TS EN 12549 + A1 Acoustic- Determination of noise for upholsterer guns - Test - Engineering test
TS EN ISO 20643 Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS EN 13736 + A1 Safety on machine tools - Pneumatic presses
TS EN 13898 + A1 / AC Machine tools - Safety - Sawing machines for cold working metals
TS EN 13128 + A2 Safety on machine tools - milling machines (including boring machines)
TS EN 1248 + A1 Casting machines - Safety regulations for abrasive blasting equipment
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 12348 + A1 Core drilling machines - With stand - Safety
TS EN 692 + A1 Machine tools - Mechanical presses - Safety
TS EN 869 + A1 Die casting machines - Safety regulations
TS EN 1248 + A1 Safety rules for casting machines - Abrasive blasting equipment
TS EN 1265 + A1 Noise test rules for foundry machinery and equipment
TS EN 13736 + A1 Safety on machine tools - Pneumatic presses
TS EN 13128 + A2 "Safety - milling machines on machine tools (including boring machines)"
TS EN 12417 + A2 Machine tools - Safety - Machining centers
TS EN 12472 + A1 Metallic coatings - Determination of nickel separation method in coated materials abrasion and corrosion simulation tests
TS EN 60745-1 Hand operated motor powered tools - Safety - Section 1: General rules
TS EN 60745-2-12Hand held motor-driven power tools - Safety - Special requirements for concrete vibrators
TS EN 12487 / AC Corrosion protection of metals - Washed and unwashed chromate conversion coatings on aluminum and aluminum alloys
TS EN 1265 + A1 Safety in machinery - Noise test code for foundry machinery and equipment
TS EN ISO 24373 Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
TS EN 61987-10 Industrial process measurements and control - Data structures and elements in process hardware catalogs - Part 10: List of specifications for industrial process measurements and control for electronic data exchange (lop) - Basic rules
Hand-held, motor-driven electrical tools - Safety - Part 60745-2: Special rules for grinders, polishers and disc type sanders (IEC 3-2-3: 60745, modified + A2: 3, modified + A2006: 1 / fix February 2010)
Tst EN 60745-2-19 Hand held motor powered tools - Safety - Part 2-19: Particular requirements for planer tables
TS EN 60519-7 Safety in electrical heating installations - Part 7: Particular requirements for installations with electronic guns
TS EN 50504 Validation of arc welding equipment19.01.2010
TS EN ISO 1461 Hot-dip galvanized coatings on materials made of iron and steel - Properties and test methods
TS EN ISO 15614-2 / AC Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminum and its alloys
TS EN 746-1 + A1 Industrial heat treatment plant - Part 1: Common safety rules for industrial heat treatment plant
TS EN 61029-2-8 Safety regulations - for portable tools with electric motors - Part 2- 8: Particular requirements for vertical engraving tools with a single spindle
TS EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide during arc welding, cutting and gouging (NO) and nitrogen dioxide (NO2) emission rates determination
TS EN ISO 28927-7 Hand-held portable power tools - Test methods for measuring vibration - Part 7: Sheet metal working and cutting tools
TS EN ISO 28927-5 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
TS EN ISO 14713-1 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 1: General
TS EN 12348 + A1 Core Drilling Machines-With Stand-Security
TS EN 13128 + A2 / AC Safety on machine tools - Milling machines (including boring machines)
TS EN 61029-2-11 Safety regulations - For portable tools powered by electric motors - Part 2-11: Particular requirements for combined miter and bench saws
TS 287 EN 895 / tst T1Metalic materials-Destructive tests on welds-Transverse tensile test
TS EN 60745-2-15 / A1Hand held, motor-driven power tools - Safety - Part 2-15: Particular requirements for shrub mowers
TS EN ISO 5171 Gas welding equipment - Pressure gauges for welding, cutting and similar processes
TS EN ISO 2503 Gas welding equipment - Pressure regulators up to 300 bar (30 mpa) and pressure regulators with flowmeter - for gas cylinders for welding, cutting and similar works
TS EN 14673 + A1 Safety in machines - Safety rules for hydraulic die-forging open die hot forging presses for forging steel and non-ferrous metals
TS EN 14681 + A1 Safety in machinery - Safety requirements for machinery and equipment for steelmaking in electric arc furnaces
TS EN 61508-6 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 6: Guidelines for the application of IEC 61508-2 and IEC 61508-3
TS EN ISO 15653 Metallic materials - Test method for determination of semi-static fracture toughness of welds
TS EN 12417 + A2 / AC Machine tools - Safety - Machining centers
TS EN 13128 + A2 / AC Safety on machine tools - Milling machines (including boring machines)
TS EN 15771 Glass and porcelain enamels - Determination of surface hardness according to Mohs hardness scale
TS EN 61131-2 Programmable controllers - Part 2: Device specifications and tests
TS EN 60745-2-19 / tst A1 Hand held motor powered tools - Safety - Part 2-19: Particular requirements for planer tables
TS EN 61131-2 Programmable controllers - Part 2: Hardware rules and tests
TS EN 15085-3 Railway applications - Welding of railway vehicles and components - Part 3: Design specifications
TS EN 15085-3 / AC Railway applications - Welding of railway vehicles and components - Part 3: Design specifications
TS EN 15085-4 Railway applications-Welding of railway vehicles and components-Part 4: Manufacturing rules
TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings
TS EN ISO 2143 Anodic oxidation of aluminum and aluminum alloys - Evaluation of the loss of absorbency of anodic oxidation coatings after pretreating with acid immersion
TS EN ISO 2931 Anodic oxidation of aluminum and aluminum alloys - Evaluation of the detection quality of anodic oxide coatings by measuring loss of admittance
TS EN ISO 3210 Aluminum and aluminum alloys - Anodic oxidation - Evaluation of the detection quality of anodic oxide coatings by mass loss measurement after immersion in phosphoric acid / chromic acid solution without acid pretreatment
TS EN ISO 7599 Anodic oxidation of aluminum and aluminum alloys - General properties for anodic oxidation coatings on aluminum
TS EN 60745-2-16 Hand-held power tools - Safety - Part 2- 16: Particular requirements for pilers
TS EN ISO 8502-11 Preparation of steel surfaces prior to application of paints and related products-tests for the assessment of surface cleanliness-part 11: field method for determining turbidity of water-soluble sulfate
TS EN 61784-3-1 Industrial communication networks - Preferences - Part 3-1: Functional safety fieldbuses - Cpf Additional features for 1
TS EN 61784-3-2 Industrial communication networks - Preferences - Part 3-2: Functional safety fieldbuses - Cpf Additional features for 2
TS EN 61298-4 Process measurement and control devices -General methods and procedures for performance evaluation-Section 4: Evaluation report content
TS EN 746-2Heat processing equipment for industrial use - Part 2: Safety regulations for combustion and fuel-driven systems
TS EN ISO 6719 Anodic oxidation of aluminum and aluminum alloys - Part 12: Measurement of reflection characteristics of aluminum surfaces using integrating spherical devices
TS EN 62418 Semiconductor devices - Test of tension of metal properties
tst EN ISO 17672 Brazing and filler metals
TS EN ISO 2085 Anodic oxidation (anodizing) coating of aluminum and aluminum alloys Continuous control of thin anodic oxidation (anodizing) coatings - Copper sulfate test
TS EN ISO 2376 Anodic oxidation (anodizing) of aluminum and aluminum alloys - Determination of electrical puncture stress
TS EN ISO 8993 Anodic oxidation of aluminum and aluminum alloys (anodizing coating) - Classification systems for the assessment of hollow corrosion - Graphical method
TS EN ISO 10215 Anodic oxidation (anodizing coating) of aluminum and aluminum alloys - Visual determination of the image clarity of anodic oxidation coatings - Graphical scale method
TS EN 61784-3-12 Industrial communication networks - Preferences - Part 3-12: Functional safety fieldbuses - Additional features for CPF 12
TS EN 61784-3-14 Industrial communication networks - Preferences - Part 3-14: Functional safety fieldbuses - Cpf Additional features for 14
TS EN ISO 15641 Milling cutters for high-speed machining - Safety regulations21.02.2013
TS EN ISO 15614-1 / D1 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Gas and arc welding of steels, arc welding of nickel and nickel alloys
TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings
TS EN 13858N Corrosion protection of metals - Flake zinc plating on iron or steel components which is not electrolytically applied
TS EN ISO 28722 Glass and porcelain enamels - Properties of enamel coatings applied to steel plates used in architectural applications
TS EN 60519-6 Safety in electro-electric installations - Part 6: Requirements for safety in industrial microwave heating equipment (IEC 60519-6: 2011)
Safety regulations - For portable tools operated by electric motors - Section 61029-2: Particular requirements for planing and thickness benches - Part 3-2
TS EN 60974-12 Arc welding equipment - Part 12: Coupling devices for welding cables
TS EN 60974-13 Arc welding equipment - Part 13: Current return pliers
TS EN ISO 15792-3 Welding consumables - Test methods - Part 3: Spatial capacity and root penetration classification test of weld consumables in an internal corner weld
TS EN ISO 6947 Welding and similar processes - Welding positions
TS EN ISO 28706-1 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 1: Determination of chemical corrosion resistance caused by acids at room temperature
TS EN ISO 28706-3 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 3: Determination of corrosion resistance caused by basic liquids - With hexagonal prism shaped tester
TS EN 15895 Cartridge-operated hand-held tools - Safety regulations - Fastening and hard marking tools
TS EN 13898 + A1 / tst AC Machine tools - Safety - Sawing machines for cold working metals
TS EN 13898 + A1 Machine tools - Safety - Sawing machines for cold working metals
TS EN 14730-1 + A1 Railway applications - Railway - Alumino thermal welding of rails - Part 1: Approval of welding processes
Safety rules for hand-operated power tools - Part 61029-2: Particular requirements for plan and thickness benches
TS EN ISO 10218-2 Robots and robotic devices - Robots for industrial environments - Safety requirements - Part 1: Robot systems and integration
TS EN ISO 14372 Welding consumables - Determination of stem resistance of metal arc welding electrodes by means of penetrable hydrogen measurement
TS EN ISO 28706-5 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 5: Determination of chemical corrosion resistance in closed systems
TS EN ISO 10218-1 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots
TS EN ISO 25239-1 Friction mixing welding - Aluminum - Part 1: Glossary
TS EN 60974-12 Arc welding equipment - Part 12: Connection arrangements for welding cables
TS EN 60974-13 Arc welding equipment - Part 13: Welding clamp
TS EN ISO 3821 Gas welding equipment - Rubber hoses for welding, cutting and similar works
TS EN ISO 14271 Resistance welding - Vickers hardness tests of spot, projection and seam welds (low and micro hardness)
TS EN ISO 17654 Resistance welding - Destructive testing of welds - Pressure test of resistance seam welds
TS EN 693 + A2 Machine tools - Safety - Hydraulic presses
TS EN ISO 10863 Non-destructive testing of welds -Ultrasonic inspection -Using flight / transit time diffraction technique (ugsk)
TS EN 10245-1 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
TS EN 10245-2 Steel wire and wire products-Organic coatings on steel wire-Part 2: PVC coated wire
TS EN 10245-3 Steel wire and wire products - Organic coatings on steel wire - Part 3: Pe coated wire
TS EN 10245-5 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
TS EN ISO 15609-5 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding
TS EN ISO 15011-5 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 5: Determination of thermal degradation during welding or cutting of organic material products in its composition using pyrolysis gas chromatography spectrometry
TS EN ISO 15792-1 / A1 Welding consumables - Test methods - Part 1: Test piece for pure weld metal test specimens in steel-nickel and nickel alloys
TS EN ISO 2080 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Glossary
TS ISO 9286 Abrasive grains and raw grains - Chemical analysis of silicon carbide
TS EN ISO 8503-1 Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of sandblasted steel substrates - Part 1: For the evaluation of abrasive blasted surfaces
TS EN ISO 8503-2 Preparation of steel base materials before the application of paint and related products-Surface roughness characteristics of sandblasted steel base materials- Part 2: Grade the surface profiles of abrasive blasted steel
TS EN ISO 8503-3 Preparation of steel base materials before applying paint-related products - Surface roughness characteristics of sandblasted steel base materials Section 3: Calibration and determination of surface profile of ISO surface profile compressors
TS EN ISO 8503-4 Preparation of steel base materials before application of paint and related products - Surface roughness characteristics of sandblasted steel base materials - Part 4: Calibration and determination of surface profile of Iso surface profile comparators
TS EN ISO 14174 Welding consumables - Fluxes for submerged and electrocruf welding: Classification
TS EN 60534-2-4 Industrial process control valves - Part 2-4: Flow capacity - Structural flow characteristics and ranges
TS EN 60770-2 Industrial - Transmitters used in process control systems - Part 2: Methods for inspection and testing
TS EN 60546-2 Analog signal control circuits for industrial process control systems - Part 2: Inspection and routine test guide
TS EN 61190-1-3 / A1 Connection materials for electronic assembly - Part 1-3: Requirements for flux and flux solid soldering for electronic components and solder alloys suitable for electronic components
TS EN 50580 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN 60676: 2012 (EN) Industrial electric heating equipment - Test methods for direct arc furnaces
TS EN ISO 3690 Welding and related processes - Determination of hydrogen content in ferritic steel arc weld metal
TS EN 10169: 2010 + A1Technical delivery conditions - Steel flat products continuously coated with organic material (roll coating)
TS EN 13523-20 Coil-coated metals - Test methods - Part 20: Foam adhesion
TS EN 13523-17 Coil-coated metals - Test methods - Part 17: Adhesive properties of peelable films
ISO EN 11148-9: 2011 (EN) Hand-held tools - Electrically driven - Safety regulations - Part 9: Die grinding tools
TS EN ISO 11127-1 Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 1: Sampling
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Determination of particle size distribution
TS EN 1708-3 Welding - Basic details of welding in steel - Part 3: Forged clothed and lined with pressure components.
TS EN ISO 15614-1: 2004 / A2 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Gas and arc welding of steels, arc welding of nickel and nickel alloys
TS EN ISO 11127-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for non-metallic abrasives used for spray cleaning - Part 6: Determination of water soluble impurities by conductivity measurement
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Moisture determination TS EN ISO 5-2011
TS EN ISO 12153 Welding consumables - Tubular flux cored wire electrodes for nickel and nickel alloys gas shielded and non-gas shielded metal arc welding - Classification
TS EN ISO 18275 Welding consumables - High strength steels - Covered electrodes for manual metal arc welding - Classification
TS EN ISO 5173: 2010 / A1 Destructive tests on welded seams in metallic materials - Bending tests
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 16834 Welding consumables - Wire electrodes, wires, rods and stacked metals for arc welding of high strength notches
TS EN ISO 17653 Destructive testing of welds of metallic materials - Bending test of resistance spot welds
TS EN ISO 21952 Welding consumables - Wire electrodes, wires and rods, deposits for arc welding of creep resistant steels - Classification
TS EN ISO 22825 Non-destructive testing of welds - Ultrasonic testing - Welding inspection of austenitic steels and nickel-based alloys
TS EN 60683 Test methods for submerged arc furnaces
TS EN 60534-8-2 Industrial process control valves - Part 8: Noise characteristics - Part 2: Laboratory measurement of hydrodynamic flow noise in control valves
TS EN 62337 Commissioning of control systems and electrical equipment in the process industry - Specific phases and main considerations
Safety rules - Part for portable tools with electric motor 61029-2 - Special rules for band saws
Safety rules - Part for portable tools with electric motor 61029-2 - Special rules for band saws
TS EN ISO 11148-1 Hand-held tools - Electrically driven - Safety regulations - Part 1: Coupling power tools for non-threaded mechanical fasteners
ISO EN 11148-2: 2011 Hand-held tools - Electrically driven - Safety regulations - Part 2: End cutting and crimping power tools
Hand-held power tools - Electrically powered - Safety regulations - Part 11148: Edge cutting tools and shears
TS EN ISO 11148-5 Hand-held tools - Electrically driven - Safety regulations - Part 5: Rotary-action impact drill
TS EN ISO 8503-4 Preparation of steel base materials before application of paint and related products - Surface roughness characteristics of sandblasted steel base materials - Part 4: Calibration and determination of surface profile of Iso surface profile comparators
TS EN ISO 14174 Welding consumables - Fluxes for submerged and electrocruf welding: Classification
TS EN 60534-2-4 Industrial process control valves - Part 2-4: Flow capacity - Structural flow characteristics and ranges
TS EN 60770-2 Industrial - Transmitters used in process control systems - Part 2: Methods for inspection and testing
TS EN 60546-2 Analog signal control circuits for industrial process control systems - Part 2: Inspection and routine test guide
TS EN 61190-1-3 / A1 Connection materials for electronic assembly - Part 1-3: Requirements for flux and flux solid soldering for electronic components and solder alloys suitable for electronic components
TS EN 50580 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN 60676: 2012 (EN) Industrial electric heating equipment - Test methods for direct arc furnaces
TS EN ISO 3690 Welding and related processes - Determination of hydrogen content in ferritic steel arc weld metal
TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions
TS EN 13523-20 Coil-coated metals - Test methods - Part 20: Foam adhesion
TS EN 13523-17 Coil-coated metals - Test methods - Part 17: Adhesive properties of peelable films
ISO EN 11148-9: 2011 (EN) Hand-held tools - Electrically driven - Safety regulations - Part 9: Die grinding tools
TS EN ISO 11127-1 Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 1: Sampling
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Determination of particle size distribution
TS EN 1708-3 Welding - Basic details of welding in steel - Part 3: Forged clothed and lined with pressure components.
TS EN ISO 15614-1: 2004 / A2 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Gas and arc welding of steels, arc welding of nickel and nickel alloys
TS EN ISO 11127-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for non-metallic abrasives used for spray cleaning - Part 6: Determination of water soluble impurities by conductivity measurement
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Moisture determination TS EN ISO 5-2011
TS EN ISO 12153 Welding consumables - Tubular flux cored wire electrodes for nickel and nickel alloys gas shielded and non-gas shielded metal arc welding - Classification
TS EN ISO 18275 Welding consumables - High strength steels - Covered electrodes for manual metal arc welding - Classification
TS EN ISO 5173: 2010 / A1 Destructive tests on welded seams in metallic materials - Bending tests
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 16834 Welding consumables - Wire electrodes, wires, rods and stacked metals for arc welding of high strength notches
TS EN ISO 17653 Destructive testing of welds of metallic materials - Bending test of resistance spot welds
TS EN ISO 21952 Welding consumables - Wire electrodes, wires and rods, deposits for arc welding of creep resistant steels - Classification
TS EN ISO 22825 Non-destructive testing of welds - Ultrasonic testing - Welding inspection of austenitic steels and nickel-based alloys
TS EN 60683 Test methods for submerged arc furnaces
TS EN 60534-8-2 Industrial process control valves - Part 8: Noise characteristics - Part 2: Laboratory measurement of hydrodynamic flow noise in control valves
TS EN 62337 Commissioning of control systems and electrical equipment in the process industry - Specific phases and main considerations
Safety rules - Part for portable tools with electric motor 61029-2 - Special rules for band saws
Safety rules - Part for portable tools with electric motor 61029-2 - Special rules for band saws
TS EN ISO 11148-1 Hand-held tools - Electrically driven - Safety regulations - Part 1: Coupling power tools for non-threaded mechanical fasteners
ISO EN 11148-2: 2011 Hand-held tools - Electrically driven - Safety regulations - Part 2: End cutting and crimping power tools
Hand-held power tools - Electrically powered - Safety regulations - Part 11148: Edge cutting tools and shears
TS EN ISO 11148-5 Hand-held tools - Electrically driven - Safety regulations - Part 5: Rotary-action impact drill
TS EN ISO 8503-4 Preparation of steel base materials before application of paint and related products - Surface roughness characteristics of sandblasted steel base materials - Part 4: Calibration and determination of surface profile of Iso surface profile comparators
TS EN ISO 14174 Welding consumables - Fluxes for submerged and electrocruf welding: Classification
TS EN 60534-2-4 Industrial process control valves - Part 2-4: Flow capacity - Structural flow characteristics and ranges
TS EN 60770-2 Industrial - Transmitters used in process control systems - Part 2: Methods for inspection and testing
TS EN 60546-2 Analog signal control circuits for industrial process control systems - Part 2: Inspection and routine test guide
TS EN 61190-1-3 / A1 Connection materials for electronic assembly - Part 1-3: Requirements for flux and flux solid soldering for electronic components and solder alloys suitable for electronic components
TS EN 50580 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN 60676: 2012 (EN) Industrial electric heating equipment - Test methods for direct arc furnaces
TS EN ISO 3690 Welding and related processes - Determination of hydrogen content in ferritic steel arc weld metal
TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions
TS EN 13523-20 Coil-coated metals - Test methods - Part 20: Foam adhesion
TS EN 13523-17Cladding metals - Test methods - Part 17: Adhesion property of peelable films
ISO EN 11148-9: 2011 (EN) Hand-held tools - Electrically driven - Safety regulations - Part 9: Die grinding tools
TS EN ISO 11127-1 Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 1: Sampling
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Determination of particle size distribution
TS EN 1708-3 Welding - Basic details of welding in steel - Part 3: Forged clothed and lined with pressure components.
TS EN ISO 15614-1: 2004 / A2 Specification and specification of welding procedures for metallic materials - Welding procedure test - Part 1: Gas and arc welding of steels, arc welding of nickel and nickel alloys
TS EN ISO 11127-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for non-metallic abrasives used for spray cleaning - Part 6: Determination of water soluble impurities by conductivity measurement
Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Moisture determination TS EN ISO 5-2011
TS EN ISO 12153 Welding consumables - Tubular flux cored wire electrodes for nickel and nickel alloys gas shielded and non-gas shielded metal arc welding - Classification
TS EN ISO 18275 Welding consumables - High strength steels - Covered electrodes for manual metal arc welding - Classification
TS EN ISO 5173: 2010 / A1 Destructive tests on welded seams in metallic materials - Bending tests
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 25239-3 Friction mixing welding - Aluminum section 2: Competence of welders
TS EN ISO 16834 Welding consumables - Wire electrodes, wires, rods and stacked metals for arc welding of high strength notches
TS EN ISO 17653 Destructive testing of welds of metallic materials - Bending test of resistance spot welds
TS EN ISO 21952 Welding consumables - Wire electrodes, wires and rods, deposits for arc welding of creep resistant steels - Classification
TS EN ISO 22825 Non-destructive testing of welds - Ultrasonic testing - Welding inspection of austenitic steels and nickel-based alloys
TS EN 60683 Test methods for submerged arc furnaces
TS EN 60534-8-2 Industrial process control valves - Part 8: Noise characteristics - Part 2: Laboratory measurement of hydrodynamic flow noise in control valves
TS EN 62337 Commissioning of control systems and electrical equipment in the process industry - Specific phases and main considerations
Safety rules - Part for portable tools with electric motor 61029-2 - Special rules for band saws
Safety rules - Part for portable tools with electric motor 61029-2 - Special rules for band saws
TS EN ISO 11148-1 Hand-held tools - Electrically driven - Safety regulations - Part 1: Coupling power tools for non-threaded mechanical fasteners
ISO EN 11148-2: 2011 Hand-held tools - Electrically driven - Safety regulations - Part 2: End cutting and crimping power tools
Hand-held power tools - Electrically powered - Safety regulations - Part 11148: Edge cutting tools and shears
TS EN ISO 11148-5 Hand-held tools - Electrically driven - Safety regulations - Part 5: Rotary-action impact drill
TS EN ISO 11127-7 Preparation of steel surfaces - Before application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 7: Determination of water soluble chlorides
ISO EN 11148-8: 2011 Hand-held tools - Electrically powered - Safety regulations - Part 8: Sanding and polishing tools
ISO EN 11148-10: 2011 (EN) Hand-held power tools - Electrically driven - Safety regulations - Part 10: Compression power tools
TS EN 60745-2-4 / A11Hand held motor-driven power tools -Safety - Part 2-4: Particular requirements for non-disc-shaped sanders and polishers
60745-2-4 / A11 Hand-held electrical power tools - Safety - Part 2-4: Particular requirements for non-disc shaped abrasives and polishers
TS EN 60745-2-4 / A11Hand held motor-driven power tools -Safety - Part 2-4: Particular requirements for non-disc-shaped sanders and polishers
TS EN 61158-3-21 Industrial communication networks - Fieldbus specifications - Part 3-21: Data link layer service description - Type 21 elements
TS EN 61158-4-21 Industrial communication networks - Fieldbus specifications - Part 4-21: Data link layer protocol specification - Type 21 elements
TS EN 61784-5-12 Industrial communication networks - Profiles - Part 5-12: Fieldbus mounting - Mounting profiles cpf 12
TS EN ISO 25239-2 Friction mixing welding - Aluminum section 2: Design of welding joints
TS EN ISO 25239-2 Friction mixing welding - Aluminum section 2: Design of welding joints
TS EN ISO 25239-4 Friction mixing welding - Aluminum section 2: Characteristics and competence of welding processes
TS EN ISO 25239-5: Friction mixing welding - Aluminum section 2011: Clit and inspection characteristics
TS EN ISO 25239-5: Friction mixing welding - Aluminum section 2011: Clit and inspection characteristics
TS EN ISO 13123 Metallic and other non-organic coatings - Cycle heating test method for thermal boundary coatings in temperature gradient
TS EN 62439-7 Industrial communication networks - Common automation networks - Part 7: Ring-based backup protocol (RRP)
TS EN 61784-5-15 Industrial networks - Profiles - Part 5-15: Field bus installation - Cpf Plant profiles for 15
TS EN 61784-5-4 Industrial networks - Profiles - Part 5-4: Field bus installation - Cpf Plant profiles for 4
TS ISO 513 Classification and application of hard cutting materials for metal chip removal with defined cutting edges - Brief presentation of main groups and application groups
TS EN 4677-001 Aerospace series - Welded and brazed connections for aerospace applications - Metallic material connections welded with electron beam - Part 001: Quality of welded connections
TS EN 60745-2-15 Hand-held, motor-driven power tools - Safety - Part 2-15: Particular requirements for blades
tst IEC 60050-841 Terms and definitions used in electrotechnics-Electric heating in industry
TS EN ISO 8205-3 Water-cooled secondary connection cables for resistance welding - Part 3: Test features
TS EN 61029-2-11 Safety regulations - Part for portable power tools 2-11: Particular requirements for combined miter and arm saws
TS EN 13100-4 Non-destructive testing of welded joints of thermoplastic semi-finished products - Part 4: High-voltage test
TS EN ISO 13588 Non-destructive testing of welds - Ultrasonic testing - Using automatic phase array technology
TS EN ISO 10882-1 Health and safety in welding and related processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
TS EN 15949 Safety machine - Safety requirements for bar mills, structural steel mills and wire rod mills
TS EN ISO 28927-12 Hand-held portable power tools - Test methods for the assessment of vibration emissions - Part 12: Tool grinding tools
Safety regulations - For portable electric motor powered tools - Section 61029-2: Rules for circular sawing machines
TS EN 710: 1997 + A1: 2010 / AC Molding and core preparation machines for associated foundry and associated equipment - Safety regulations
TS EN ISO 11148-7 Hand-held tools - Electrically powered - Safety regulations - Part 7: Grinders
TS EN ISO 14175 Welding consumables - Gases and gas mixtures standard for melting welding and the like
TS EN 60974-11 Arc welding equipment - Part 11: Electrode pliers
TS EN ISO 20643 / A1Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS 13592Authorized services - Rules for hydraulic systems for power transmission
TS EN ISO 11148-3 Hand-held non-electric power tools - Safety regulations - Part 3: Drills and guiding tools
TS EN ISO 11148-4 Hand-held non-electric power tools - Safety regulations - Part 4: Rotary stationary impact power tools
TS EN ISO 11148-6 Hand-held non-electric power tools - Safety regulations - Part 6: Joint power tools for threaded fasteners
TS EN ISO 11148-12 Hand-held powerless machines-Safety rules-Part 12: Circular, vibrating and jigsaws
TS EN 16252 Machines used for compaction of waste materials and recyclable parts - Horizontal baling presses - Safety rules
TS ISO 10914 Assembly kits for screws and nuts - Wrench and spline wrenches for threaded nuts
TS EN ISO 13585: 2012 Brazing - Proficiency testing of solder and solder applicators
TS EN ISO 17663 Welding - Quality requirements for heat treatment in connection with welding and related processes
TS EN 10244-1 / AC Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
TS EN 60974-1 Arc welding equipment - part 1: Welding power units
Gas welding equipment - Torches for gas welding, heating and cutting - Specifications and tests TS EN ISO 5172: 2006 / A1
TS EN ISO 15614-13: Characteristics and characterization of welding procedures of metallic materials -Welding Procedure Tests- Part 2012: welding of butt and butt welding
TS EN 14587-3 Railway applications - Road - Butt and butt welding section of rails 3: Welding with passage structures
TS EN ISO 4136 Destructive tests on welds of metallic materials-Transverse tensile test
TS EN ISO 9016: 2012 Destructive tests on welds in metallic materials - Tapping tests - Test specimen location, notch direction and inspection
TS EN 50109-2-2 / AC Compression hand tools - Tools for clamping termination of electrical cables and wires of low frequency and radio frequency applications - Part 2-2: Specific requirements for coaxial contacts and radio frequency connectors Tools with open mouths for removable and interchangeable teeth ranging from g, q to t, v and w
TS EN ISO 9455-10: 2012 Soft solder paste - Test methods - Part 10: Yield of solder spreading
TS EN 62061: 2005 / A1: 2013 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
TS EN 61326-2-5 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-5: Special requirements - Performance criteria for field devices with interfaces to IEC 61784-1, cp 3 / 2, test configurations and working conditions
TS EN 61499-1 Function blocks - Part 1: Architectural construction
TS EN 61499-2 Function blocks - Part 2: Software tool rules
TS EN 13067 Plastic welding personnel-Welder qualification tests-Welded thermoplastic stages
60745-2: 3-2011: 2 / A2 Electric motor driven hand tools - Safety - Part 3-XNUMX: Particular requirements for grinders, disk type abrasives and polishers
Non-destructive testing of weld seams - Radiographic examination - Part 17636: X and gamma ray techniques with digital detectors TS EN ISO 2-2013
TS EN ISO 9455-16: 2013 Soft solder powders - Test methods - Part 16: Powder activity tests, wetting balance method
TS EN ISO 15012-1: 2013 Health and safety in welding and related processes - Equipment for the capture and separation of welding fumes - Part 1: Requirements for separation efficiency testing and marking
TS EN ISO 15615: 2013 Gas welding equipment - Acetylene manifold for welding, cutting and similar operations - Safety rules for high pressure devices
TS EN ISO 15609-6: 2013 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Part 6: Laser-arc hybrid welding
TS EN ISO 5172 / A1 Gas welding equipment - Torches for gas welding, heating and cutting - Features and tests
TS EN 62439-1 / A1 Industrial communication networks - high availability automation networks - Part 1: general concepts and calculation methods
Non-destructive testing of weld seams - Radiographic examination - Part 17636: Film X and gamma ray techniques TS EN ISO 1-2013
TS EN 61131-6 Programmable control instruments - Part 6: Functional safety
TS EN 61326-1 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 1: General requirements
TS EN 61326-2-1 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-1: Special requirements - Performance criteria, test configurations and operating conditions for precision test equipment for applications that are vulnerable to emu
TS EN 61326-2-2 Electrical equipment for measuring, control and laboratory use - Emu requirements - Part 2-2: Special requirements - Performance criteria for portable tester, measuring device and monitoring device used in low voltage distribution systems, test configurations and operation conditions
Electrical equipment for measuring, control and laboratory use - Emu requirements - Part 61326-2: Special requirements - Performance criteria, test configurations and operating conditions for integrated or remote signal conditioning transducers
TS EN 61326-2-4 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-4: Special requirements - Device for insulation fault location according to IEC 61557-9 and device for insulation monitoring device according to IEC 61557-8 test configuration, operating conditions and performance criteria12.06.2013
TS ISO 5749 Pliers and pliers - Diagonal cutting pliers - Dimensions and test values
TS EN ISO 9717: 2013Metal and other inorganic coatings - Phosphate conversion coatings in metals
TS EN 61158-5-15 Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service description - Type 15 elements
TS EN 61987-11 Industrial process measurements and control - Data structures and elements in process hardware catalogs - Part 11: List of specifications for industrial process measurements and control (LOP) for electronic data exchange - Basic rules
TS ISO 5743 Pliers and Pliers-Technical General Specifications
TS EN 61158-5-3 Industrial communication networks - Fieldbus specifications - Part 53: Application layer service description - Type 3 elements
TS EN 61158-6-21 Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specifications - Type 21 elements
TS EN 61158-6-18 Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specifications - Type18 elements
TS EN 61158-6-15 Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specifications - Type 15 elements
TS EN ISO 15609-2 Specification and classification of welding procedures for metal materials-Welding procedure specification-Part 2: Gas welding
TS EN ISO 15618-2 Classification test of welders submerged under water - Part 2: Submersible welders and welding operators performing dry welding under high pressure
TS EN ISO 10111 Metallic and other inorganic coatings - Mass measurement in unit area - Review of gravimetric and chemical analysis methods
TS EN 61511-2 Functional safety - Safety instrumented systems for the process industry - Part 2: Guidelines for the implementation of IEC 61511-1
TS EN 60974-11 Arc welding equipment - Part 11: Electrode pliers
TS EN 60974-8: 2009 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
TS EN 14587-2 Railway applications - Road - Butt welding of rails - Part 2: Welding of new R220, R260, R260Mn and R350HT class rails on site with a mobile welding machine
61029-2-6: 2010: 2 Safety rules - For portable electric motor powered tools - Part 6-XNUMX: Particular requirements for water-fed, diamond-tipped drills
TS EN 61010-2-201 Safety rules for measuring, controlling and laboratory electrical appliances - Part 2-201: Particular requirements for control devices
TS EN 61131-3 Programmable controllers - Part 3: Programming languages
TS EN ISO 6847 Welding consumables - Accumulation of a pure weld metal block for chemical analysis
TS EN 61499-4 Function Blocks - Part 4: Requirements for compatibility profiles
TS EN ISO 12932: 2013 Welding - Laser-arc hybrid welding of steel, nickel and nickel alloys - Quality classes for defects
TS EN 60519-10 Safety in electrical heating installations - Part 10: Particular requirements for electrically resistant trace heating systems for industrial and commercial applications.
TS EN 13603: 2013 Copper and copper alloys - Test methods for the evaluation of protective tin coatings on electrically drawn round copper wires
TS EN 60745-2-23 Hand-held motor-driven power tools - Safety - part: 2-23: Die grinders and small rotary tools.
TS EN ISO 15614-14: 2013 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steel, nickel and nickel alloys
TS EN ISO 9312: 2013Resistance welding equipment - Insulated pins used in electrode stands
TS EN 60519-12 Safety in electrical heating installations - Section 12: Particular requirements for infrared electrical heating installations
TS EN 60974-2 Arc welding equipment - Part 2: Liquid cooling systems
TS EN 60974-7 Arc welding equipment - Part 7: Torches
TS EN 60974-7 Arc welding equipment - Part 7: Torches
TS EN 61326-2-6 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Special requirements - IVD medical equipment
TS EN 60745-2-23 Hand-held motor-driven power tools - Safety - part: 2-23: Die grinders and small rotary tools.
TS EN 15085-1: 2007 + A1: 2013 Railway applications - Welding of railway vehicles and components - Part 1: General
TS EN ISO 12996 Mechanical connection - Destructive testing of connections - Sample dimensions and test procedure for tensile shear testing of single connections
TS EN ISO 12996 Mechanical connection - Destructive testing of connections - Sample dimensions and test procedure for tensile shear testing of single connections
TS EN 13438 Paints and varnishes - Powder organic coatings for galvanized or powder zinc coated steel products for building purposes
TS EN ISO 28881 Safety on machine tools - Electro-erosion machines
TS EN ISO 2553 Welding and related operations - Symbolic representation on drawings - Welded joints
TS EN ISO 544 Welding consumables - Technical delivery conditions for welding supplements - Product type, dimensions, tolerances and marking
TS EN 62382 Control systems used in the process industry - Electrical and instrumental loop control
TS EN 62439-4 Industrial communication networks - High availability automation network - Part 4: Cross-network redundancy protocol (crp)
TS EN ISO 14732 Welding personnel - Qualification examination of welding operators and welding adjusters for fully mechanized and automatic melting of metallic materials
TS EN ISO 9606-1 Welders qualification examination - Melting welding - Part 1: Steels
TS EN ISO 6520-2 Welding and related processes - Classification of geometric defects in metallic materials - Part 2: Pressure welding
TS EN ISO 9017 Destructive tests on welds in metallic materials-Fracture test
TS EN ISO 10675-2 Non-destructive testing of welds - Acceptance levels for radiographic examination - Part 2: Aluminum and alloys
TS EN ISO 15626 Non-destructive testing of welds - Flight time diffraction technique (TOFD) - Acceptance levels
TS EN ISO 17639 Destructive testing of welds in metallic materials - Macroscopic and microscopic examination of welds
TS EN ISO 27830 Metallic and other inorganic coatings - Basic principles for metallic and inorganic coating properties
TS EN ISO 27830 Metallic and other inorganic coatings - Basic principles for metallic and inorganic coating properties
TS EN ISO 9692-1 Welding and similar processes - Recommendations for welding nozzle preparation - Part 1: Manual metal arc welding of steels, metal arc welding with gas shielding, gas welding, TIG welding and beam welding
TS EN ISO 9539 / A1 Materials for gas welding, cutting and similar equipment
TS EN ISO 14554-1 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
TS EN ISO 14554-2 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Initial quality requirements
TS EN 60974-5 Arc welding equipment - Part 5: Wire feeders
Preparation of steel surfaces - Before the application of paints and related materials - Test methods for non-metallic abrasives used in spray cleaning - Part 11127: Determination of apparent density
TS EN 50580 / A1 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN ISO 28881 / AC Safety on machine tools - Electro-erosion machines
TS EN 62693 Industrial electrical heating systems - Test methods for infrared electrical heating systems
Safety rules - chapter for portable tools with electric motor 61029-2: Particular requirements for combined miter and arm saws
Safety rules - chapter for portable tools with electric motor 61029-2: Particular requirements for combined miter and arm saws
TS EN 62395-2 Heating systems with electrical resistors for industrial and commercial applications - Part 2: Application guide for system design, installation and repair
TS EN 62395-1 Heating systems with electrical resistors for industrial and commercial applications - Part 1: General and test characteristics
TS EN 61010-2-201 / AC Safety rules for measuring, controlling and laboratory electrical appliances - Part 2-201: Particular requirements for control devices
TS EN 61514-2 Industrial process control systems - Part 2: Methods for evaluating the performance of intelligent valve positioners with pneumatic output
TS EN 62264-1 Enterprise control system integration - Part 1: Models and terminology
TS EN 62264-2 Enterprise control system integration - Part 2: Objects and attributes for enterprise control system integration
TS EN 61131-9 Programmable controllers - Part 9: Point-to-point digital communication interface for small sensors and actuators (SDCI)
TS EN 61784-5-1 Industrial communication networks - Profiles - Part 5-1: installation of fieldbuses - CPF 1 Installation profiles
TS EN 61784-5-2 Industrial communication networks - Profiles - Part 5-2: installation of fieldbuses - CPF 2 Installation profiles
TS EN 61784-5-3 Industrial communication networks - Profiles - Part 5-3: installation of fieldbuses - CPF3 Installation profiles
TS EN 61784-5-6 Industrial communication networks - Profiles - Part 5-6: installation of fieldbuses - CPF 6 Installation profiles
TS EN 61784-5-8 Industrial communication networks - Profiles - Part 5-8: installation of fieldbuses - CPF 8 Installation profiles
TS EN 61784-5-11 Industrial communication networks - Profiles - Part 5-11: installation of fieldbuses - CPF 11 Installation profiles
TS EN 61784-5-13 Industrial communication networks - Profiles - Part 5-13: installation of fieldbuses - CPF 13 Installation profiles
TS EN 61784-5-14 Industrial communication networks - Profiles - Part 5-14: installation of fieldbuses - CPF 14 Installation profiles
TS EN 61784-5-16 Industrial communication networks - Profiles - Part 5-16: installation of fieldbuses - CPF 16 Installation profiles
TS EN 61784-5-17 Industrial communication networks - Profiles - Part 5-17: installation of fieldbuses - CPF 17 Installation profiles
TS EN 61784-5-18 Industrial communication networks - Profiles - Part 5-18: installation of fieldbuses - CPF 18 Installation profiles
TS EN 61784-5-19 Industrial communication networks - Profiles - Part 5-19: installation of fieldbuses - CPF 19 Installation profiles
TS EN 61918 Industrial communication networks - Establishment of communication networks in industrial terms
TS EN 12622 + A1 Machine tools - Hydraulic press brakes - Safety
TS EN ISO 17636-1 Non-destructive testing of weld seams - Radiographic inspection - Part 1: Film X and gamma ray techniques
TS EN ISO 10042 + AC Welding - Arc welded joints in aluminum and its alloys - Quality levels for irregularities
TS EN 14681 + A1 Safety in machinery - Safety requirements for machinery and equipment for steelmaking in electric arc furnaces
TS ISO 5743 Pliers and nippers - General technical rules
TS ISO 5749 Pliers and nippers - Side chisels - Dimensions and test values
TS ISO 5742 Pliers and nippers - Designation
TS ISO 5744 Pliers and nippers - Test methods
TS ISO 5745 Pliers and nippers - Pliers for holding and other operations (pliers) - Dimensions and test values
TS ISO 5746 Pliers and nippers - Engineering and pliers - Dimensions and test values
TS ISO 5747 Pliers and nippers - Pliers with pliers, side nippers and pliers - Dimensions and test values
TS ISO 5748 Pliers and nippers-Top chisels-Dimensions and test values
TS EN 60974-3 Arc welding equipment - Part 3: Arc starting and balancing devices
TS EN ISO 5826 Transformers - For resistance welding machines - General specifications applicable to all transformers
TS EN 12814-3 Semi-finished thermoplastic materials-Tests of welded joints-Part 3: Tensile test
TSE CEN / TS 16599 Photocatalysis - irradiation conditions for testing conductive material and measurement photocatalytic properties of these conditions
TS EN ISO 13482 Robots and robotic devices - safety requirements for personal care robots (ISO 13482: 2014)
TS EN 14587-1 Railway applications-Welding of road-rails - Part 1: New R220, R260, R260Mn and R350HT class rails in a fixed installation
TS EN ISO 12671 Thermal spraying - Thermal spray coating - Symbolic representation on drawings
TS EN ISO 14113 Gas welding equipment - Rubber and plastic hose and hose assemblies for industrial gases up to 450 bar (45 mpa)
TS EN ISO 20643 Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS ISO 7755-7 End milling cutters for hard metal - Part 7: End milling cutters (type G)
TS EN ISO 8502-9 Preparation of steel surfaces - Before the application of paint and related materials - Tests for the evaluation of surface cleanliness - Part 9: Field method for the determination of conductivity of water soluble salts
TS EN 16296 Defects in welded thermoplastic joints - Quality levels
TS ISO 5746 Pliers and nippers - Engineering and pliers - Dimensions and test values
TS ISO 5744 Hand tools-Pliers and nippers-Test methods
TS ISO 5748 Pliers and nippers-Top chisels-Dimensions and test values
TS ISO 5747 Hand Tools - Pliers and nippers with parallel rim - Pliers with side cutter, Pliers with side cutter - Side pliers with pliers and side cutter Dimensions and test values
TS ISO 7755-7 End mills for hard metal - Part 7: Curved, pointed (type G)
TS ISO 7755-2 Hard metal burrs - Part 2: Cylindrical burrs (type A)
TS ISO 7755-3 Hard metal burrs - Part 3: Cylindrical burrs with round tip (type C)
TS ISO 7755-1 Hard metal burrs - Part 1: General features
TS ISO 7755-4 Hard metal burrs - Part 4: Spherical burrs (type D)
TS ISO 7755-5 Hard metal burrs - Part 5: Oval burrs (type E)
TS ISO 7755-6 End milling cutters for hard metal - Part 6: Round end milling cutters (type F)
TS EN ISO 10683: 2014 Fasteners - Non-electrolytically applied zinc flake coatings
TS EN ISO 17677-1 Resistance welding - Terms - Section 1: Spot, projection and seam welding
TS EN 12732 + A1 Gas infrastructure - Welded steel pipeline - Functional requirements
TS EN 13523-0 Roll-coated metals - Test methods - Part 0: General introduction
TS EN 60745-2-3 / A11Electric motor driven hand tools - Safety - Part 2-3: Special rules for grinders, disc type and polishers
TS EN 60974-10 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10: 2014)
Safety regulations - For hand held electrical tools, hand-held tools, portable tools and lawn and gardening machines - Part 62841-2: Particular requirements for hand held electric screwdrivers and hammer switches
Safety regulations - For hand held electrical tools, hand-held tools, portable tools and lawn and gardening machines - Part 62841-2: Particular requirements for non-disc-handled hand-held abrasives and polishers - Part 4-2
Safety regulations - For hand held electrical tools, hand held tools, portable tools and lawn and gardening machines - Part 62841-2: Special rules for hand-held circular saws
Safety regulations - For hand held power tools, portable tools and lawn and gardening machines - Part 62841-3: Particular requirements for portable table saws (IEC 1-3-1: 62841, modified)
Safety regulations - For hand held electrical tools, hand-held tools, portable tools and lawn and gardening machines - Part 62841-3: Particular requirements for portable diamond tipped drills with liquid system (IEC 6-3-6: 62841 , modified)
TS EN ISO 14555 Welding - Stud arc welding of metallic materials
TS EN 14700 Welding consumables - Welding consumables for hard surfaces
TS EN ISO 14114 Gas welding equipment - Acetylene manifold systems for welding cutting and related operations - General requirements
TSE CEN / EN 15339-6 Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Holding system, Dust collection, Exhaust system, Filter
TS EN ISO 9455-5 Soft soldering powders-Test methods-Part 5: Copper mirror test
TS EN ISO 15614-12 Specification and specification of welding procedure for metallic materials -Welding procedure test-Section 12: Spot, seam and projection welding
TS EN ISO 9453 Soft solder alloys - Chemical compositions and forms
TSE CEN ISO / TR 16060 Destructive testing of welds in metallic materials - Etching for macroscopic and microscopic examination.
TS ISO 7755-8 Hard metal burrs - Part 8: Flame burrs (type H)
TS ISO 7755-9 Hard metal burrs - Part 9: Taper burrs 60 ° and 90 ° (types J and K)
TS ISO 7755-8 Hardmetal burrs - Part 8: Flame burrs (style Y) 30.10.2014 25.100.20
TS EN 60770-3: 2014 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of smart transmitters
TS EN 61918 / AC Industrial communication networks - Installation of communication networks in industrial campuses
TS EN ISO 10683 Fasteners - Non-electrolytically applied zinc flake coatings
TS ISO 240Milling blades - Connection of blades - Dimensions
TS ISO 9242 Pliers and nippers - Concrete pliers (for builders) - Dimensions and test values
TS ISO 9243 Pliers and nippers - Carpenter's nippers - Dimensions and test values
TS ISO 7755-1 Hard metal burrs - Part 1: General features
TS ISO 7755-2 Hard metal burrs - Part 2: Cylindrical burrs (type A)
TS ISO 7755-3 Hard metal burrs - Part 3: Cylindrical burrs with round tip (type C)
TS ISO 7755-4 Hard metal burrs - Part 4: Spherical burrs (D)
TS ISO 7755-5 Hard metal burrs - Part 5: Oval burrs (type E)
TS ISO 7755-6 End milling cutters for hard metal - Part 6: Round end milling cutters (type F)
TS ISO 7755-9 Hardmetal burrs - Part 9: 60 degree and 90 degree conical burrs (styles J and K)
TS ISO 299T grooves for machine tools
TS ISO 2380-1 Assembly kits for bolts and nuts - Flat-head screwdrivers - Part 3: Bits for manual and machine-operated screwdrivers
tst ISO 240 Milling cutters
TS EN 14901 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile fittings and accessories (severe conditions) - Specifications and test methods
TS EN ISO 6103 Grinding wheels - Permissible unbalances on delivery - static test
TS EN 62798 Industrial electrosurgical equipment - Test methods for infrared emitters
TS EN ISO 25980 Welding and similar processes - Health and safety - Transparent welding curtains, strips and screens for arc welding
TS EN 61158-4-2 Industrial communication networks - Fieldbus specifications - Part 4-2: Data link layer protocol specifications - Type 2 elements
TS EN 61158-4-3 Industrial communication networks - Fieldbus specifications - Part 4-3: Data link layer protocol specifications - Type 3 elements
TS EN 61158-4-4 Industrial communication networks - Fieldbus specifications - Part 4-4: Data link layer protocol specifications - Type 4 elements
TS EN 61158-4-11 Industrial communication networks - Fieldbus specifications - Part 4-11: Data link layer protocol specifications - Type 11 elements
TS EN 61158-4-12 Industrial communication networks - Fieldbus specifications - Part 4-12: Data link layer protocol specifications - Type 12 elements
TS EN 61158-4-13 Industrial communication networks - Fieldbus specifications - Part 4-13: Data link layer protocol specifications - Type 13 elements
TS EN 61158-4-14 Industrial communication networks - Fieldbus specifications - Part 4-14: Data link layer protocol specifications - Type 14 elements
TS EN 61158-4-19 Industrial communication networks - Fieldbus specifications - Part 4-19: Data link layer protocol specifications - Type 19 elements
TS EN 61158-4-22 Industrial communication networks - Fieldbus specifications - Part 4-22: Data link layer protocol specification - Type 22 elements
TS EN 61158-5-2 Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service description - Type 2 elements
TS EN 61158-5-4 Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service description - Type 4 elements
TS EN 61158-5-5 Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service description - Type 5 elements
TS EN 61158-5-9 Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service description - Type 9 elements
TS EN 61158-5-10 Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service description - Type 10 elements
TS EN 61158-5-12 Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service description - Type 12 elements
TS EN 61158-5-13 Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service description - Type 13 elements
TS EN 61158-5-14 Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service description - Type 14 elements
TS EN 61158-5-19 Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service description - Type 19 elements
TS EN 61158-5-20 Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service description - Type 20 elements
TS EN 61158-5-22 Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service description - Type 22 elements
TS EN 61158-1 Industrial communication networks - Fieldbus specifications - Part 1: General structure and guidance for IEC 61158 and IEC 61784 standard series
TS EN 61158-2 Industrial communication networks - Fieldbus specifications - Section 2: Technical information and service description for the physical line
TS EN 61158-3-1 Industrial communication networks - Fieldbus specifications - Part 3-1: Data link layer service description - Type 1 elements
TS EN 61158-3-2 Industrial communication networks - Fieldbus specifications - Part 3-2: Data link layer service description - Type 2 elements
TS EN 61158-3-3 Industrial communication networks - Fieldbus specifications - Part 3-3: Data link layer service description - Type 3 elements
TS EN 61158-3-4 Industrial communication networks - Fieldbus specifications - Part 3-4: Data link layer service description - Type 4 elements
TS EN 61158-3-12 Industrial communication networks - Fieldbus specifications - Part 3-12: Data link layer service description - Type 12 elements
TS EN 61158-3-13 Industrial communication networks - Fieldbus specifications - Part 3-13: Data link layer service description - Type 13 elements
TS EN 61158-3-14 Industrial communication networks - Fieldbus specifications - Part 3-14: Data link layer service description - Type 14 elements
TS EN 61158-3-22 Industrial communication networks - Fieldbus specifications - Part 3-21: Data link layer service description - Type 22 elements
TS EN 61158-4-1 Industrial communication networks - Fieldbus specifications - Part 4-1: Data link layer protocol specifications - Type 1 elements
TS EN 61158-6-3 Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specifications - Type 3 elements
TS EN 61158-6-4 Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specifications - Type 4 elements
TS EN 61158-6-5 Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specifications - Type 5 elements
TS EN 61158-6-9 Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specifications - Type 9 elements
TS EN 61158-6-22 Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specifications - Type 22 elements
TS EN 61158-6-20 Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specifications - Type 20 elements
TS EN 61158-6-2 Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specifications - Type 2 elements
TS EN 61158-6-10 Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specifications - Type 10 elements
TS EN 61158-6-12 Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specifications - Type 12 elements
TS EN 61158-6-13 Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specifications - Type 13 elements
TS EN 61158-6-14 Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specifications - Type 14 elements
TS EN 61158-6-19 Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specifications - Type 19 elements
TS EN 61158-4-20 Industrial communication networks - Fieldbus specifications - Part 4-20: Data link layer protocol specifications - Type 20 elements
TS EN 62714-1 Engineering data interchange format used in industrial automation system engineering - Part 1: Architecture and general requirements
TS ISO 1173 Assembly kits for screws and nuts - Turning bits for hand-operated and machine-operated screwdriver inserts and fittings - Dimensions, torsion test
TS ISO 1173 Assembly kits for screws and nuts - Turning bits for hand-operated and machine-operated screwdriver inserts and fittings - Dimensions, torsion test
TS ISO 2351-1 Assembly kits for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted-head screws;
TS ISO 2351-2 Mounting kits for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for Phillips slotted screws
TS ISO 2351-3 Assembly kits for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon head screws
tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Sampling for emission rate determination and smoke particle analysis (ISO 15011-1: 2009)
EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide (CO2) during arc welding, cutting and gouging Determination of emission rates of (NO) and nitrogen dioxide (NO15011) (ISO 2-2009: XNUMX)
tst EN ISO 15011-4 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke datasheet (ISO 15011-4: 2006)
TS EN ISO 15011-4 / tst A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet (ISO 15011-4: 2006 / Amd 1: 2008)
TS EN 14901 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile iron fittings and accessories (for severe conditions) - Rules and test methods
TS ISO 2351-1Mounting kits for screws and nuts - Machine-operated screwdriver inserts - Part 1: Screwdriver inserts for screwdriver grooved screws
TS ISO 2351-2 Mounting kits for screws and nuts - Machine-operated screwdriver inserts - Part 2: Screwdriver inserts for screwdriver slot screws
TS ISO 2351-3 Assembly kits for screws and nuts - Machine-operated screwdriver inserts - Part 3: Screwdriver inserts for hexagon socket screws
TS ISO 2380-1 Assembly kits for screws and nuts - Screwdrivers for flat head, screwdriver grooved screws - Part 1: Bits for manual and machine-operated screwdrivers
TS ISO 299Table table tops - T-slots and corresponding bolts
TS EN 13523-2Roll-coated metals- Test methods - Part 2: Brightness
TS EN 12622 + A1 Machine tools - Hydraulic press brakes - Safety
TS EN 61010-2-201 / tst AC Safety regulations for measuring, control and laboratory electrical appliances - Part 2-201: Particular requirements for control devices
TS EN 13523-3 Roll-coated metals - Test methods - Part 3: Color difference - Instrumental comparison
TS EN 13523-25 Roll-coated metals- Test methods - Part 25: Resistance to moisture
TS EN 13523-26 Roll-coated metals - Test methods - Part 26: Resistance to water condensation
TS EN 13523-4 Roll-coated metals - Test methods - Part 4: Hardness of pencils
TS EN 15594 Railway applications -Railway-Rails repair by electric arc welding
TS ISO 10888 Keyless type three-jaw drill chucks - Specifications
TS EN 13985 + A1 Machine tools - Guillotine Shears - Safety
TS EN 50580 Electric motor hand tools - Safety - Special rules for spray guns
TS EN 50580 / A1 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN 10169: 2010 + A1Technical delivery conditions - Steel flat products continuously coated with organic material (roll coating)
TS EN 14700 Welding consumables - Welding consumables for hard surfaces
TS EN ISO 2400 Non-destructive testing - Ultrasonic testing - Specification for calibration block No.1 (ISO 2400: 2012)
TS EN ISO 7963 Non-destructive testing - Ultrasonic testing - Specification for Calibration Block No.2 (ISO 7963: 2006)
TS EN ISO 7291 Gas welding equipment - Pressure regulators up to 300 mpa (300 bar) for manifold systems for welding, cutting and similar operations
tst EN 60519-4 Safety in electrical heating installations - Part 4: Particular requirements for arc furnace installations
TS EN ISO 3861 Rubber hoses - Specification for sand and sand blasting
TS EN 60745-2-3 / tstA2 Electric motor driven hand tools - Safety - Part 2-3: Particular requirements for grinders, disk type abrasives and polishers
TS EN 60745-2-3 / A11Electric motor driven hand tools - Safety - Part 2-3: Special rules for grinders, disc type and polishers
tst EN 60974-10 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10: 2014)
tst EN 60974-5 Arc welding equipment - Part 5: Wire feeders
Safety regulations - For portable tools operated with electric motors - Section 61029-2: Particular requirements for combined miter saws
Safety regulations - For portable tools operated with electric motors - Section 61029-2: Particular requirements for combined miter saws
TS EN ISO 14341 Welding consumables - Wire electrodes and weld metal for arc welding of non-alloy and fine-grained steels - Classification
TS EN 60974-3 Arc welding equipment - Part 3: Arc starting and balancing devices
tst EN 62395-1 Heating systems with electrical resistors for industrial and commercial applications - Part 1: General and test characteristics
tst EN 62395-2 Heating systems with electrical resistors for industrial and commercial applications - Part 2: Application guide for system design, installation and repair
tst EN 62693 Industrial electrical heating systems - Test methods for infrared electrical heating systems
Safety regulations - For hand held power tools, portable tools and lawn and gardening machines - Part 62841-2: Particular rules for hand held electric screwdrivers and hammer switches
Safety regulations - For hand held power tools, portable tools and lawn and gardening machinery - Part 62841-2: Particular requirements for non-disc form, hand sanders and polishers
Safety regulations - For hand held electrical tools, hand-held tools, portable tools and lawn and gardening machines - Part 62841-2: Special rules for hand-held circular saws
Safety regulations - For hand held tools, portable tools and lawn and gardening machines - Part 62841-3: Particular requirements for portable table saws (IEC 1-3-1: 62841, modified)
Safety regulations - For hand held electrical tools, hand held tools, portable tools and lawn and gardening machines - Part 62841-3: Particular requirements for portable diamond tipped drills with liquid system (IEC 6-3-6: 62841 , modified)
TS ISO 8404 Pins - Angular - Basic dimensions
TS EN 14587-2 / D1 Railway applications - Road - Butt welding of rails - Part 2: Welding of new R220, R260, R260Mn and R350HT class rails on site with a mobile welding machine
TS EN 10245-2Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC coated wire
TS EN 4707: 2014 Aviation series - Acid cleaning of hexavalent chromium-free aluminum and aluminum alloys
TS EN ISO 14554-1 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
TS ISO 5745 Hand tools-Pliers and nippers-Pliers-for holding and other operations-Dimensions and test values
TS ISO 9243 Pliers and nippers - Carpenter's nippers - Dimensions and test values
TS ISO 9242 Pliers - Construction pliers - Dimensions and test values
TS EN ISO 23125 Machine tools - Safety - Lathes
TS ISO 666Grinding stones with (flat) hub flanges
TS ISO 3685 Lathes - Life test
TS ISO 5610-1 Cutting tools - Tool holders - For turning and copying - For replaceable hard metal inserts - Part 1: Dimensions
TS ISO 5609-1 Changeable boring bits for hard metal inserts-dimensions
TS EN 16564 Machines and installations for extraction and processing of natural stones - safety - Requirements for sawing / milling machines, including bridge-type numerical control (NC / CNC) versions
TS EN 16564 Machines and installations for extraction and processing of natural stones - safety - Requirements for sawing / milling machines, including bridge-type numerical control (NC / CNC) versions
TS EN ISO 12736 Oil and gas industries - Wet thermal insulation coatings for pipelines, drilling fluid lines and marine structures
Safety rules - Part for portable tools with electric motor 61029-2 - Particular requirements for band saw blades - 5 - 2011 - 11 - 2
Safety rules - Part for portable tools with electric motor 61029-2 - Particular requirements for band saw blades - 5 - 2011 - 11 - 2
TS EN 62798: 2014 / ACIndustrial electroplating equipment - Test methods for infrared emitters
TS EN 15571 Machines and plants for extraction and processing of natural stones - Safety - Requirements for surface treatment machines
60745-2: 3-2011: 12 / A2 Electric motor driven hand tools - Safety - Part 3-XNUMX: Particular requirements for grinders, disk type abrasives and polishers
TS EN ISO 9453 Soft solder alloys - Chemical compositions and forms
TS ISO 5609-2 Interchangeable hard metal inserts for hole enlargement pens-style F
TS ISO 5609-3 Drill bits for interchangeable hard metal inserts - Part 3: Style K
TS ISO 5609-4 Drill bits for interchangeable hard metal inserts - Part 3: Style L
TS ISO 5609-5 Drill bits for interchangeable hard metal inserts - Part 3: Style U
TS ISO 5609-6 Drill bits for interchangeable hard metal inserts - Part 3: Style Q
TS EN ISO 14919 Thermal spraying - Wires, rods and cords for flaming and arc spraying - Classification - Technical delivery conditions
TS ISO 5610-2 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 2: Style A
TS ISO 5610-2 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 2: Style A
TS ISO 5610-3 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 3: Style B
TS ISO 5610-3 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 3: Style B
TS ISO 5610-4 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 4: Style D
TS ISO 5610-4 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 4: Style D
TS EN ISO 14920 Thermal spraying - Self-spraying and melting of pasted alloys (ISO 14920: 2015)
TS ISO 5610-5 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 5: Style F
TS ISO 5610-5 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 5: Style F
TS ISO 5610-6 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 6: Style G
TS ISO 5610-6 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 6: Style G
TS ISO 5610-7 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 7: Style J
TS ISO 5610-7 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 7: Style J
TS ISO 5610-8 Cutting tools - Tool holders (toolholders) - Used in turning and copying - For replaceable carbide inserts - Part 8: Style K
TS ISO 5610-8 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 8: Style K
TS ISO 5610-9 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 9: Style L
TS ISO 5610-9 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 9: Style L
TS ISO 5610-10 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 10: Style N
TS ISO 5610-10 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 10: Style N
TS ISO 5610-11 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 11: Style R
TS ISO 5610-11 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 11: Style R
TS ISO 5610-12 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 12: Style S
TS ISO 5610-12 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 12: Style S
TS ISO 5610-13 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 13: Style T
TS ISO 5610-13 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 13: Style T
TS ISO 5610-14 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 14: Style H
TS ISO 5610-14 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 14: Style H
TS ISO 5610-15 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 15: Style V
TS ISO 5610-15 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 15: Style V
TS ISO 8977 Pressing Tools - cages
TS ISO 3364 Hard metal inserts - Interchangeable - Rounded corners - Partial cylindrical bore - Dimensions
TS ISO 16462 Cubic boron nitride tips, tipped or filled - Dimensions, types
TS ISO 16462 Cubic boron nitride tips, tipped or filled - Dimensions, types
TS ISO 5414-2 Tool holders-for fixing bolts-Cylindrical shank for end mills- Part 2: Tool holders connection dimensions and classification
TS EN 13509 Cathodic protection measurement techniques
TS ISO 241Cuttering tools- Lathes and planing pens- Cross-sectional shapes and dimensions
TS ISO 8018 Bushings - with cap and seat post cap - used for bearing in molds
TS ISO 839-1 Machine tools-7 / 24 milling mandrel with taper shank-Longitudinal keyway-for hollow cutter blades
TS ISO 5608 Cutting tools - Interchangeable hard metal insert - Tool holders - Tooling and marking - Identification symbols
TS EN ISO 12736 Oil and gas industries - Wet thermal insulation coatings for pipelines, drilling fluid lines and marine structures
TS EN ISO 14555 Welding - Stud arc welding of metallic materials
TS ISO 10887 Key-type three-jaw drill chucks - Specifications
TS ISO 10887 Key-type three-jaw drill chucks - Specifications
TS ISO 10888 Keyless type three-jaw drill chucks - Specifications
TS ISO 5734 Partitioning devices for mechanical machine tools, determination of test conditions and accuracy
TS ISO 1708 Lathes-Test conditions of general purpose parallel lathes-Precision control
TS ISO 6987 Interchangeable hard metal inserts - Rounded corners - Partial cylindrical fixing holes - Dimensions
TS ISO 16463 Multi-crystal (grain) diamond inserts with indexable insert - Dimensions and types
TS ISO 16463 Multi-crystal (grain) diamond inserts with indexable insert - Dimensions and types
TS ISO 5413 Machine tools - Absolute drive of morse taper - Dimensions
TS EN ISO 5817 Welding - Melt-welded joints (excluding bundle welding) in steel, nickel, titanium and their alloys - Quality levels for defects)
tst EN ISO 5826 Transformers - For resistance welding machines - General specifications applicable to all transformers
TS ISO 8404 Molding tools - Angled pins
TS EN ISO 9012 Gas welding device - Air suction hand torches - Specifications and tests1
TS ISO 7755-12 Hard metal burrs - Part 12: Reverse Taper burrs (type N)
TS EN 13523-5 Roll-coated metals - Test methods - Part 5: Resistance to rapid deformation (tapping test)
TS EN 13523-7 Roll-coated metals - Test methods - Part 7: Resistance to cracking during bending (T-bending test)
TS EN 13523-13 Roll-coated metals - Test methods - Part 13: Resistance to heat accelerated aging
TS EN 13523-14 Roll-coated metals - Test methods - Part 14: Chalking (Helmen method)
TS ISO 6106 Abrasive products - Diamond or cubic boron nitride - Grain size determination method
TS EN 16602-70-08 Space product assurance - Manual soldering of high-reliability electrical connections
TS ISO 10888 Keyless type three-jaw drill chucks - Specifications
TS ISO 10888 Keyless type three-jaw drill chucks - Specifications
TS ISO 10887 Key-type three-jaw drill chucks - Specifications
TS ISO 10887 Key-type three-jaw drill chucks - Specifications
TS ISO 666Grinding stones with (flat) hub flanges
TS ISO 5608 Turning and copying tool holders and toolholders for exchangeable hard metal inserts - Brief display
TS ISO 5609-1 Tool holders - for cylindrical body boring pens with replaceable hard metal tips - Part 1: Short designation, calculation for styles, dimensions and corrections
TS ISO 5609-2 Tool holders for drills with cylindrical body with replaceable hard metal tips - Part 2: Style F
TS ISO 5609-3 Tool holders for drill bits with replaceable hard metal tip cylindrical body - Part 3: Style K
TS ISO 5609-4 Tool holders for drills with cylindrical body with replaceable hard metal tips - Part 4: Style L
TS ISO 5609-5 Tool holders - for drill bits with cylindrical body with exchangeable hard metal tip - Part 5: Style U
TS ISO 5609-6 Tool holders for drill bits with replaceable hard metal tip cylindrical body - Part 6: Style Q
TS ISO 5610-2 Rectangular tool holders for replaceable hard metal inserts - Part 2: Style A
TS ISO 5610-3 Rectangular tool holders for replaceable hard metal inserts - Part 3: Style B
TS ISO 5610-4 Rectangular tool holders for replaceable hard metal inserts - Part 4: Style D
TS ISO 5610-5 Rectangular body tool holders for exchangeable hard metal inserts - Part 5: Style F
TS ISO 5610-6 Rectangular body tool holders for exchangeable hard metal inserts - Part 6: Style G
TS ISO 5610-7 Rectangular tool holders for exchangeable hard metal inserts - Part 7: Style J
TS ISO 5610-8 Rectangular tool holders for replaceable hard metal inserts - Part 8: Style K
TS ISO 5610-9 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 9: Style L
TS ISO 5610-9 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 9: Style L
TS ISO 5610-10 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 10: Style N
TS ISO 5610-10 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 10: Style N
TS ISO 5610-11 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 11: Style R
TS ISO 5610-11 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 11: Style R
TS ISO 5610-12 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 12: Style S
TS ISO 5610-12 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 12: Style S
TS ISO 5610-13 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 13: Style T
TS ISO 5610-13 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 13: Style T
TS ISO 5610-14 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 14: Style H
TS ISO 5610-14 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 14: Style H
TS ISO 5610-15 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 15: Style V
TS ISO 5610-15 Cutting tools - Tool holders - For turning and copying - For interchangeable hard metal inserts - Part 15: Style V
TS ISO 8977 Pressing Tools - cages
TS ISO 3364 Interchangeable hard metal (carbide) inserts - Rounded corners, with cylindrical fixing holes - Dimensions
TS ISO 16462 Interchangeable hard metal inserts - Cubic boron nitride - Segmented or solid - Dimensions, types
TS ISO 16462 Interchangeable hard metal inserts - Cubic boron nitride - Segmented or solid - Dimensions, types
TS ISO 5414-2 Tool holders - For end mills with retaining screws, cylindrical shank - Part 2: Tool holders connection dimensions and brief designation
TS ISO 241 Cutting tools - Lathes and planing pens - Cross-sectional shapes and dimensions
TS ISO 8018 Bushings - with cap and seat post cap - used for bearing in molds
TS ISO 839-1 Machine tools-7 / 24 milling mandrel with taper shank-Longitudinal keyway-for hollow cutter blades
TS ISO 5734 Divisor for mechanical, machine tools - Acceptance requirements - Precision inspection
TS ISO 1708 General purpose lathes - Acceptance requirements - Precision inspection
TS ISO 6987 Interchangeable hard metal inserts - Rounded corners, with partial cylindrical fixing holes - Dimensions
TS ISO 16463 Multi-crystal (granulated) diamond inserts, segmented - Dimensions, types
TS ISO 16463 Multi-crystal (granulated) diamond inserts, segmented - Dimensions, types
TS ISO 5413 Machine tools - Absolute drive of morse taper - Dimensions
TS ISO 6106 Abrasive products - Diamond or cubic boron nitride - Grain size determination method
tst ISO 5611 Cutting tools - Interchangeable hard metal tips - Adjustable tool holders - Type A - Dimensions
TS ISO 7755-12 Hard metal burrs - Part 12: Reverse taper burrs (type N
TS EN 62682 Management of alarm systems in industrial processes
TS EN 62734 Industrial networks - Wireless network and communication profiles - ISA 100.11a
TS ISO 5610-1 Rectangular tool holders for replaceable hard metal inserts - Part 1: General description, determination of dimensions and interrelation
TS EN ISO 9606-1 Welders qualification examination - Melting welding - Part 1: Steels
TS EN ISO 15614-12 Specification and specification of welding procedure for metallic materials -Welding procedure test-Section 12: Spot, seam and projection welding
TS EN ISO 9455-5 Soft solder powders - Test methods - Part 5: Copper mirror test
tst EN ISO 9692-1 Welding and similar operations - Recommendations for welding nozzle preparation - Part 1: Manual metal arc welding of steels, metal arc welding with gas shielding, gas welding, TIG welding and beam welding
TS EN 14462 Surface treatment equipment - Noise test code for surface treatment equipment including auxiliary handling equipment - Accuracy grades 2 and 3 "
TS EN 61557-9 Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv d.a - Testing, measuring or monitoring protective devices - Part 9: Equipment used for locating insulation failure in IT systems
TS EN ISO 11666: Non-destructive testing of welds - Ultrasonic inspection - Acceptance levels
TS EN ISO 17635 Non-destructive testing of welds - General requirements for metallic materials
TS EN ISO 4528 Glassy and porcelain enamelled products - A guide for selecting test methods according to the glassy and porcelain enameled parts of the items
TS EN ISO 10447 Resistance welding-Peeling and chipping test of resistance spot and projection welds
TS EN ISO 14323 Resistance welding - Destructive testing of welds - Sample dimensions and procedures - For impact tensile shear test and longitudinal tensile test for spot weld and relief projection welds
TS EN ISO 14373 Resistance welding - Procedure for spot welding of coated and uncoated low carbon steels
TS EN ISO 23277 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
TS EN ISO 23278 Non-destructive testing of welds-Magnetic welding of welds-Acceptance levels
TS EN 14462 Surface treatment equipment - Noise test code for surface treatment equipment including auxiliary handling equipment - Accuracy grades 2 and 3 "
TS EN 12732 + A1 Gas infrastructure - Welded steel pipeline - Functional requirements
TS ISO 9343 Pliers and pliers - Sliding pliers - Dimensions and test values
TS ISO 8976 Pliers and nippers - Adjustable pliers - Dimensions and test values
TS ISO 2725-1 Mounting tools for bolts and nuts - Square-end wrenches - Part 1: Hand-operated wrenches
TS ISO 9183-1 Press tools - Coupling plates for press dies - Part 1: Type a
TS ISO 9183-2 Press tools - Wear plates for press molds - Part 2 type b
TS ISO 10242-1 Press tools - Staple holder handles - Part 1: Type a
TS ISO 9448-10 Press tools- Guide bushings section 10: Form e, plain bearing bushes with flange, type 2
TS ISO 3408-1 Ball screws - Part 1: Terms, descriptions and brief description
TS ISO 230-2 Inspection and testing principles of machine tools - Part 2: Determination of positioning accuracy and repeatability of numerically controlled axes
TS ISO 9361-1 Interchangeable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing holes (mechanically tightened)
TS ISO 9361-2 Interchangeable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing holes
TS ISO 2936 Mounting tools for screws and nuts - Hexagon wrenches
TS ISO 7738 Assembly kits for screws and nuts - Combined wrenches - Key lengths and maximum head thickness
TS ISO 8406 Molding tools - Mold base plates - Cylindrical centering elements and ferrules
TS ISO 9182-1 Pressing tools- Guide pins section 1: Types
TS ISO 9448-1 Press kits - Guide bushings section 1: Forms
TS ISO 9182-4 Press tools - Guide pins section 4: Type c, bushed and tapered pins
TS ISO 9182-4 Press tools - Guide pins section 4: Type c, bushed and tapered pins
TS ISO 9182-5 Press tools - Guide pins section 5: Type d, guide pins with flanged end locking
TS ISO 494Drills-Helical-Cylindrical shank-Long series
TS ISO 9448-2 Press tools - Guide bushings section 2: Shape a, plain, plain bearing bushes, type 1
TS ISO 3070-3 Acceptance requirements for boring and milling machines with horizontal spindle - Accuracy tests - Part 3: Work clamp table for fixed, column movable machines
TS ISO 3070-3 Acceptance requirements for boring and milling machines with horizontal spindle - Accuracy tests - Part 3: Work clamp table for fixed, column movable machines
TS ISO 10242-2 Press tools - Staple holder handles - Part 2: Type c 27.08.2015 25.120.10
TS ISO 3438 Drills - Helical - Morse taper shank - Stepped - for bores before tapping 27.08.2015 25.100.30
TS ISO 5468 Drills - with hard metal tip - for impact concrete - Dimensions 27.08.2015 25.100.30
TS ISO 3318 Mounting tools for screws and nuts - Open-ended on both sides, star-shaped and combination wrenches on both sides - Maximum head dimensions 27.08.2015 25.140.30
TS ISO 12043 Roller bearings - Single row cylindrical roller bearings - Round and roll sides with free post and postpaid dimensions 27.08.2015 25.100.20
TS ISO 1711-1 Mounting kits for screws and nuts - Technical specifications section 1: Manually operated open mouth, star and socket wrenches 27.08.2015 25.140.30
TS ISO 3070-1 Acceptance requirements for boring and milling machines with horizontal spindle - Accuracy tests - Part 1: Machines with fixed column and movable table 27.08.2015 25.080.20
TS ISO 3070-1 Acceptance requirements for boring and milling machines with horizontal spindle - Accuracy tests - Part 1: Machines with fixed column and movable table 27.08.2015 25.080.40
TS ISO 3070-2 Acceptance requirements for boring and milling machines with horizontal spindle - Accuracy tests - Part 2: Table-type machines 27.08.2015 25.080.20
TS ISO 3070-2 Acceptance requirements for boring and milling machines with horizontal spindle - Accuracy tests - Part 2: Table-type machines 27.08.2015 25.080.40
TS ISO 10242-3 Press tools - Staple holder handles - Part 3: Type d 27.08.2015 25.120.10
TS ISO 9182-2 Press tools - Guide pins section 2: Type a, straight pins 27.08.2015 25.120.10
TS ISO 9182-3 Press tools - Guide pins section 3: Type b, guide pins with end locking 27.08.2015 25.120.10
TS ISO 9448-3 Press tools - Guide bushings section 3: Form b, plain, ball cage bushes, type 1, 27.08.2015 25.120.10
TS ISO 9448-4 Press tools - Guide bushings section 4: Shape c, headed, plain bushes, type 1 27.08.2015 25.120.10
TS ISO 9448-5 Press tools - Guide bushings section 5: Form d, with head, ball cage bushes, type 1 27.08.2015 25.120.10
TS ISO 9448-6 Press tools- Guide bushings section 6: Form e, flanged, plain bearing bushes type 1 27.08.2015 25.120.10
TS ISO 9448-7 Press tools - Guide bushings section 7: Shape f, flanged, ball cage bushes, type 1 27.08.2015 25.120.10
TS ISO 9448-8 Press tools- Guide bushings section 8: Shape g, split, plain bearing bushes, type 1 27.08.2015 25.120.10
TS ISO 9448-9 Press tools - Guide bushings section 9: Form b, plain ball cage bushes, type 2 27.08.2015 25.120.10
TS ISO 9448-11 Press tools- Guide bushings section 11: Form f, flanged ball cage bushings type 2 27.08.2015 25.120.10
TS ISO 3408-3 Ball screws - Part 3: Acceptance requirements and acceptance tests 27.08.2015 25.060.99
TS ISO 10102 Mounting tools for screws and nuts - Wrenches on both sides - Key lengths and head thicknesses 27.08.2015 25.140.30
TS ISO 16366 Press tools-L shaped guides 27.08.2015 25.120.10
TS ISO 16367 Press tools - Guide plates - U and v blocks 27.08.2015 25.120.10
TS ISO 10071-1 Pressing tools-Ball-locking punches - Part 1: Ball-locking punches, for light duty 27.08.2015 25.120.10
TS ISO 11900-1 Pressing tools-Staple holders with ball latch-Part 1: Type a (rectangular) and type b (square) -27.08.2015 25.120.10 for light duty services
TS ISO 11900-2 Pressing tools-Staple holders with ball locking device - Part 2: Type c and type d, reduced 27.08.2015 25.120.10 for light duty
TS ISO 2725-2 Assembly kits for bolts and nuts-Square end wrenches-Part 2: Machine-operated insert wrenches ("impact") - Dimensions 27.08.2015 25.140.30
TS ISO 2725-3 Mounting kits for bolts and nuts - Square end wrenches - Part 3: Machine-operated insert wrenches ("without impact") - Dimensions 27.08.2015 25.140.30
TS ISO 3315 Mounting tools for bolts and nuts-Rotating arms for hand-operated square-end wrenches-Dimensions and tests 27.08.2015 25.140.30
TS ISO 1174-1 Assembly kits for bolts and nuts-Square inserts-Part 1: Square inserts for hand-operated wrenches 27.08.2015 25.140.30
TS ISO 230-2 Inspection and testing principles of machine tools - Part 2: Determination of positioning accuracy and repeatability of numerically controlled axes 27.08.2015 25.080.01
TS ISO 21950 Coated abrasives - Flat discs 27.08.2015 25.100.70
TS ISO 11054 Cutting tools - Brief description of high-speed steel groups 27.08.2015 25.100.01
TS ISO 10216 Metal oxide coatings - Aluminum and aluminum alloys coated with onadic oxidation (anodizing) - Instrument determination of the image quality of anodic oxidation coatings - Instrumental methods 27.08.2015 25.220.20
TS ISO 9588 Metallic and other inorganic coatings - Post-coating treatment of iron or steel to reduce the risk of hydrogen brittleness 27.08.2015 25.220.20
TS ISO 9588 Metallic and other inorganic coatings - Post-coating treatment of iron or steel to reduce the risk of hydrogen brittleness 27.08.2015 25.220.40
TS ISO 9587 Metallic and other inorganic coatings - pre-treatment of iron or steel to reduce the risk of hydrogen brittleness 27.08.2015 25.220.20
TS ISO 9587 Metallic and other inorganic coatings - pre-treatment of iron or steel to reduce the risk of hydrogen brittleness 27.08.2015 25.220.40
TS ISO 8502-5 / T1 (Number Modification: TS EN ISO 8502-5) Preparation of steel surfaces - Surface cleaning evaluation tests before application of paint and related materials - Part 5: Chloride measurement on steel surfaces prepared for painting (ion detection tube method) 16.04.2014
TS ISO 11529 End Mills - Naming - Shank with solid or tip design or cutter - type and bore type milling machine 27.08.2015 25.100.20
TS ISO 1174-1 Mounting tools for screws and nuts - Square inserts - Part 1: Square inserts for hand-operated insert tools 19.01.2016 25.140.30
TS ISO 2725-1 Mounting kits for screws and nuts - Square-end nuts - Part 1: Hand-operated nuts (insert) 19.01.2016 25.140.30
TS ISO 3315 Mounting tools for screws and nuts - Swivel arms for manually operated socket wrenches - Dimensions and tests 19.01.2016 25.140.30
TS EN 15572 Machinery and plants for mining and natural stone tools - Safety - requirements for edge finishing machines 23.10.2015 25.080.50
TS EN 62841-2-9 Safety rules - For hand held tools, portable tools and lawn and garden machines operated by electric motors - Part 2-9: Particular requirements for hand-held threaders and threading apparatus 23.10.2015 25.140.20
TS EN 60079-19: 2011 / A1 Electrical devices - Used in explosive atmospheres - Part 19: Repair, major maintenance and commissioning 23.10.2015 25.180.10
TS EN 60519-1 Safety in installations for electrical heating and electromagnetic processing - Part 1: General rules 23.10.2015 25.180.10
TS EN 62135-2 Resistor soldering device part 2: Electromagnetic compatibility (EMC) requirements
TS EN 60398 Safety in installations for electrical heating and electromagnetic processing - General performance test methods
TS EN 62135-1 Resistance welding equipment - Part 1: Safety rules for design, manufacture and installation
TS EN 50632-1 Electric motor powered tools - Dust measurement process - Section 1: General rules
TS EN 50632-2-1 Electric motor powered tools - Dust measurement process - Part 2-1: General requirements for diamond tipped drills
TS EN ISO 11611 Protective clothing - Used in welding and related processes
TS EN 50632-2-22 Electric motor tools - Dust measurement process - Part 2-22: Special rules for cutting machines and wall screws
TS EN 60974-10: 2014 / A1 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10: 2014)
TS EN 62061: 2005 / A2Machine safety - Functional safety of safety-related electrical, electronic and programmable electronic control systems
TS EN 62841-1 Hand held power tools, portable tools and lawn and gardening machines with electric motors - Safety - Part 1: General rules
TS EN 61285 Safety of industrial-process control-analysis enclosures
TS EN 62541-10 OPC Unified Architecture - Part 10: Programs
TS EN 62708 Types of documents for electrical and infrastructure projects in the process industry
TS EN 62541-3 OPC Unified Architecture - Part 3: Address Space Model
TS EN 62541-4 OPC Unified Architecture - Part 4: Services
TS EN 62541-4 OPC Unified Architecture - Part 4: Services
TS EN 62541-5 OPC Unified Architecture - Part 5: Information Model
TS EN 62541-6 OPC Unified Architecture - Part 6: Matching
TS EN 62541-7 OPC Unified Architecture - Part 7: Profiles
TS EN 62541-8 OPC Unified Architecture - Part 8: Data Access
TS EN 62541-9 OPC Unified Architecture - Part 9: Alarm and Conditions
TS EN 62541-11 OPC Unified Architecture - Part 11: History Access
TS EN 62541-13 OPC Unified Architecture - Part 13: Stacks
TS EN 62541-100 OPC Unified Architecture - Part 100: Device Interface
TS EN 62657-2 Industrial Communication Networks - Wireless communication networks - Part 2 - One-on-one management
TS EN 62714-2 Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2 - Role classes libraries
TS EN 62769-1 Field device integration (FDI) - Part 1 - Overview
TS EN 62769-2 Field device integration (FDI) - Part 2 - FDI client
TS EN 62769-4 Field device integration (FDI) - Part 4 - FDI packages
TS EN 62769-6 Field device integration (FDI) - Part 6: FDI Technology Mapping
TS EN 62769-7 Field device integration (FDI) - Part 7 - FDI communication devices
TS EN 62769-103-1 Field device integration (FDI) - Part 103-1 - Profiles - PROFIBUS
TS EN 62769-103-4 Field device integration (FDI) - Part 103-4 - Profiles - PROFINET
TS EN 62769-3 Field device integration (FDI) - Part -3 - FDI Server
TS EN 62769-5 Field device integration (FDI) - Part 5: FDI Information Model
TS EN 62769-101-1 Field device integration (FDI) - Part -101-1: Profiles - H1 basic industrial communication
TS EN 62769-101-2 Field device integration (FDI) - Part -101-2: Profiles - HSE basic industrial communication
TS EN 62769-109-1 Field device integration (FDI) - Part -109-1 - Profiles - HART® and WirelessHART®
TS EN 13523-15 Roll-coated metals - Test methods - Part 15: Metamerism
TS EN 13523-23 Roll-coated metals - Test methods - Part 23: Color stability in humid environments containing sulfur dioxide
Gas welding equipment - Pressure regulators up to 2503 bar (2009 mpa) and pressure regulators with flowmeter - for gas cylinders for welding, cutting and similar works TS EN ISO 1: 2015 / A300
Gas welding equipment - Torches for gas welding, heating and cutting - Specifications and tests TS EN ISO 5172: 2006 / A2
TS EN ISO 7291: 2010 / A1 Gas welding equipment - Pressure regulators up to 300 mpa (300 bar) for manifold systems for welding, cutting and similar processes
TS EN ISO 17658 Welding - Oxygen flame, laser beam and plasma cutting defects - Terms
TS EN ISO 18278-1 Resistance welding - Weldability - Part 1: Evaluation of weldability for resistance spot, seam and projection welding of metallic materials
TS EN ISO 3834-5 Quality requirements for fusion welding of metallic materials - Part 5: Documents required to confirm the conformity with the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 standards
TS EN 62453-303-1 Field instrument instrument (fdt) interface specifications-Section 303-1: Communication profile integration -Iec 61784 cp 3 / 1 and cp 3 / 2
TS EN 60974-1 Arc welding equipment - Part 1: Welding power units (IEC 60974-1: 2012)
TS ISO 5611-10 Cartridges, type A - For replaceable inserts - Part 10: Style U
TS ISO 5611-1 Cartridges, type A - for interchangeable inserts - Part 1: General inspection, interrelation and determination of dimensions
TS ISO 5611-2 Cartridges, type A - for replaceable inserts - Part 2: Style F
TS ISO 5611-3 Cartridges, type A - For replaceable inserts - Part 3: Style G
TS ISO 5611-4 Cartridges, type A - For replaceable inserts - Part 4: Style J
TS ISO 5611-5 Cartridges, type A - For replaceable inserts - Part 5: Style K
TS ISO 5611-6 Cartridges, type A - For replaceable inserts - Part 6: Style L
TS ISO 5611-7 Cartridges, type A - for replaceable inserts - Part 7: Style R
TS ISO 5611-8 Cartridges, type A - For replaceable inserts - Part 8: Style S
TS ISO 5611-11 Cartridges, type A - for replaceable inserts - Part 11: Style W
TS ISO 5611-12 Cartridges, type A - For replaceable inserts - Part 12: Style Y
TS ISO 5611-1 Type A cartridges for interchangeable hard metal inserts - Part 1: General inspection, interrelation and determination of dimensions
TS ISO 5611-10 Type A cartridges for exchangeable hard metal inserts - Part 10: Style U
TS ISO 5611-11 Type A cartridges for exchangeable hard metal inserts - Part 11: Style W
TS ISO 5611-12 Type A cartridges for exchangeable hard metal inserts - Part 12: Style Y
TS ISO 5611-2 Type A cartridges for exchangeable hard metal inserts - Part 2: Style F
TS ISO 5611-3 Type A cartridges for exchangeable hard metal inserts - Part 3: Style G
TS ISO 5611-4 Type A cartridges for exchangeable hard metal inserts - Part 4: Style J
TS ISO 5611-5 Type A cartridges for exchangeable hard metal inserts - Part 5: Style K
TS ISO 5611-6 Type A cartridges for exchangeable hard metal inserts - Part 6: Style L
TS ISO 5611-7 Type A cartridges for exchangeable hard metal inserts - Part 7: Style R
TS ISO 5611-8 Type A cartridges for exchangeable hard metal inserts - Part 8: Style S
TS ISO 5611-9 Type A cartridges for exchangeable hard metal inserts - Part 9: Style T
TS ISO 3685 Tool life test - Turning tools
tst EN ISO 10218-2 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot Systems and Integration (ISO)
TS ISO 8373 Manipulating industrial robots - Terms
TS EN ISO 1071 Welding consumables - Covered electrodes, wires, rods and tubular flux electrodes for melt welding of cast iron - Classification
TS EN ISO 18273 Welding consumables - Wire electrodes, wires and rods for welding aluminum and aluminum alloys - Classification
TS ISO 8373 Robots and robotic devices - Glossary
TS ISO 2725-3 Assembly kits for screws and nuts - Square-end nuts - Part 3: Machine-operated nuts (without impact)
TS ISO 1832 Interchangeable inserts for cutting tools - short designation
TS ISO 1832 Interchangeable inserts for cutting tools - short designation
TS ISO 8694 Molding tools - Gradual removal pins, dimensions and tolerances
TS ISO 3316 Wrenches for nuts and bolts, fasteners by hand, square end nuts
TS EN ISO 6520-2 Welding and related processes - Classification of geometric defects in metallic materials - Part 2: Pressure welding
TS EN ISO 4063 Welding and welding processes - Nomenclature of operations and reference numbers
TS EN ISO 9692-1 Welding and similar processes - Recommendations for welding nozzle preparation - Part 1: Manual metal arc welding of steels, metal arc welding with gas shielding, gas welding, TIG welding and beam welding
TS EN ISO 14174 Welding consumables - Fluxes for submerged and electrocruf welding: Classification
TS EN ISO 18275 Welding consumables - High strength steels - Covered electrodes for manual metal arc welding - Classification
TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules
TS ISO 1986-1 Plane surface grinding machines - Test conditions and precision control with horizontal spindle shaft
TS EN ISO 8430-1 Resistance spot welding-Electrode holders-Section 1: Taper end fixation 1: 10
TS EN ISO 8430-2 Resistance spot welding-Electrode holders-Section 2: Morse taper fixing
TS EN ISO 8430-3 Resistance spot welding-Electrode holders-Section 3: Fixing with parallel sidewall for insert
tst EN 61010-2-201 Safety regulations for measuring, checking and laboratory electrical equipment - Part 2-201: Particular requirements for control devices
TS EN 60974-6 Arc welding equipment - Part 6: Limited work equipment
TS EN 62135-1: 2015 / AC Resistance welding equipment - Part 1: Safety rules for design, manufacture and installation
TS EN 62841-1: 2015 / AC Hand-held power tools, portable tools and lawn and garden machines with electric motors - Safety - Part 1: General rules
Safety regulations - For hand held electrical tools, hand held tools, portable tools and lawn and gardening machines - Section 62841-2: Hand held planers
60745-2: 3-2011: 13 / A2 Electric motor driven hand tools - Safety - Part 3-XNUMX: Particular requirements for grinders, disk type abrasives and polishers
Safety regulations - For hand held electrical tools, hand held tools, portable tools and lawn and gardening machines - Part 62841-2: Particular requirements for hand held electric screwdrivers and hammer switches
Safety regulations - For hand held electrical tools, hand held tools, portable tools and lawn and gardening machines - Part 62841-2: Particular requirements for non-disk handled abrasives and polishers - Part 4-2 / AC
Safety regulations - For hand held electrical tools, hand held tools, portable tools and lawn and gardening machines - Part 62841-3: Special rules for portable table saws (IEC 1-3-1: 62841, changed)
Safety regulations - For hand held instruments, portable tools and lawn and gardening machines - Part 62841-3: Particular requirements for portable miter saws
Safety regulations - For hand held tools, portable tools and lawn and gardening machines - Part 62841-3: Particular requirements for portable cutting machines
TS EN ISO 18278-2 Resistance welding - Weldability - Part 2: Evaluation procedure for weldability in spot welding
TS EN ISO 28706-4 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 4: Determination of chemical corrosion resistance caused by alkaline liquids by cylindrical tester
TS EN 1539 Dryers and ovens - with flammable materials - Safety regulations
TS EN ISO 9015-2 Destructive testing of welds of metallic materials-Hardness test-Part 2: Micro hardness test of welded joints
TS EN 61987-21 Industrial process measurement and control - data structures and elements in process equipment catalogs - Part 21: List of specifications (LOPs) - Automatic valves for electronic data exchange - Generic structures
TS EN 61987-22 Industrial process measurement and control - Data structures and elements in process hardware catalogs - Part 22: Specification list of valve body assemblies for electronic data exchange (LOP)
TSE CEN / TS 16892 Plastics - Welding of thermoplastics - Properties of welding method
TS EN 50632-2-6 Electric motor powered tools - Dust measurement process - Part 2-6: Particular requirements for hammers
TS EN ISO 28765 Glass and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial wastewater or sludge
TS EN ISO 6848 Ballpoint tungsten electrodes for arc welding and cutting - Classification
TS EN ISO 14172 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
TS EN ISO 17643 Non-destructive testing of welds - Eddy current testing of welds by complex plane analysis
TS EN ISO 2746 Glass and porcelain enamels - High voltage test
TS EN ISO 12670 Thermal spraying - Components coated with thermal spraying - Technical supply conditions
TS EN ISO 12679 Thermal spraying - Recommendations for thermal spraying
TS EN ISO 28721-4 Glass and porcelain enamels - Glass lined appliances for processing plants - Part 4: Quality requirements for glass lined flanged steel pipes and flanged steel fittings
TS EN ISO 17641-2 Destructive tests on welds of metallic materials - Hot crack tests for welded structures - Arc welding - Part 2: Self-limiting tests
TS EN ISO 9018 Destructive tests on welded seams in metallic materials - Tensile test in cross and overlap joints
TS EN ISO 28764 Glass and porcelain enamels - Preparation of test specimens for enamel testing on steel plates, aluminum plates and cast iron
TS EN ISO 636 Welding consumables-Rods, wires and stacked welds for tungsten inert gas welding of unalloyed and fine-grained steels-Classification
TS EN ISO 28721-2 Glass and porcelain enamels - Glass lined appliances for processing plants - Part 2: Brief indication and property of chemical and thermal shock resistance
TS ISO 3317 Assembly kits for bolts and nuts - Square hex head extension parts - For power-driven socket wrenches
TS EN 61804-3 Function blocks and electronic device description language (EDDL) for process control - Part 3: EDDL syntax and semantics
TS EN 61784-5-15 / A1Industrial networks - Profiles - Part 5-15: Field bus installation - Plant profiles for CPF 15
TS EN 61987-24-1 Industrial process measurement and control - Data structures and elements in process hardware catalogs - Part 24-1: Specification list of positioners and I / P converters for electronic data exchange (LOP)
TS EN 61804-5 Function blocks (FB) and electronic device description language (EDDL) for process control - Part 5: EDDL built-in library
TS EN 61784-5-4 / A1 Industrial communication networks - Profiles - Part 5-4: Field bus installation - Cpf Plant profiles for 4
TS EN 60534-8-4 Industrial process control valves - Part 8-4: Noise characteristics - Noise estimation due to hydrodynamic flow
TS EN 61784-5-12 / A1Industrial communication networks - Profiles - Part 5-12: Fieldbus mounting - Mounting profiles CPF 12
TS EN 61784-5-10 / A1Industrial networks - Preferences - Part 5-10: Functional safety fieldbuses - Cpf Additional features for 10
TS EN 61987-23 Industrial process measurement and control - Data structures and elements in process hardware catalogs - Part 23: Feature list of actuators for electronic data exchange (LOP)
TS EN 61804-4 function blocks for process control and Electronic Device Description Language (DDL) - Part 4: EDD interpretation
TS EN ISO 28927-5 / A1 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
28927-8 / A1 Hand-held portable power tools - Test methods for the assessment of vibration emission - Part 8: Saws, polishing, filing machines and oscillating or rotating small saws - Flange 1: Polishing machines, change feed
TS EN ISO 6789-1 Assembly tools for bolts and nuts - Hand-turned tools - Part 1: Requirements and methods for design conformity testing and quality conformity testing: minimum requirements for conformity certificates
TS EN ISO 6789-2 Mounting tools for bolts and nuts - Hand-turned tools - Part 2: Requirements for calibration and uncertainty of measurement
TS EN ISO 14916 Thermal spray-Tensile strength determination
TS EN ISO 14917 Thermal spraying - Terms, classification
TS EN ISO 19496-1 Glass and porcelain enamels - Terminology - Part 1: Terms and definitions
TS EN ISO 19496-2 Glass and porcelain enamels - Terminology - Part 2: Visual description and description
TS EN ISO 4885 Iron-based materials-Heat treatment - Dictionary
TS EN ISO 9013 Thermal cutting - Classification of thermal cuts - Geometric product specifications and quality tolerances
TS EN ISO 28706-2 Glass and porcelain enamels - Determination of chemical corrosion resistance - Part 2: Determination of chemical corrosion resistance caused by boiling acids, neutral liquids and / or their vapors
TSE CEN ISO / TR 15608 Guide for welding-metallic material grouping system
TS EN 13523-29 Roll-coated metals - Test methods - Part 29: Resistance to environmental contamination (dirt collection and peeling)
TS EN ISO 8503-5 Preparation of steel substrates before the application of paints and related products - Tests for the evaluation of surface cleanliness - Part 5: Repetitive tape method for the determination of surface profile
TS EN 13523-12 Coil-coated metals - Test methods - Part 12: Scratch resistance
TS EN 13523-1 Roll-coated metals - Test methods - Part 1: Coating thickness
TS EN 13523-10 Roll-coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation
TS EN 13523-22 Roll-coated metals - Test methods - Part 22: Color difference - Visual comparison
TS EN 16845-1 Photocatalytic - Anti-contamination chemical activity using absorbed organic substances under solid / solid conditions - Part 1: Paints on porous surfaces
TS EN ISO 8502-2 Preparation of steel surfaces - Before the application of paints and related materials - Tests for the evaluation of surface cleanliness - Part 2: Determination of chloride on cleaned surfaces in laboratory
TS EN ISO 8502-3 Preparation of steel surfaces - Surface cleanliness evaluation tests before application of paint and related materials - Part 3: Evaluation of powder on steel surfaces prepared for painting (pressure sensitive tape method)
TS EN ISO 8502-4 Preparation of steel surfaces - Prior to the application of paint and related materials - Surface cleaning evaluation tests - Part 4: Guidance on the determination of the possibility of condensation before the application of paint
tst ISO 2936 Assembly kits for screws and nuts - Hexagon wrenches
TS EN 61987-15 Industrial process measurement and control - Data structures and elements in process hardware catalogs - Part 15: Specification list of level measuring instruments for electronic data exchange
TS EN 62264-3 Company controlled system integration - Part 3: Operational models of production operations management
TS EN 62453-1 Field Instrument Tool (FDT) Interface specifications - Section 1: Overview and Guide
TS EN 62453-2 Field Instrument Instrument (FDT) Interface features - Part 2: Concepts and Detailed Description
TS ISO 1173: 2001 Mounting tools for screws and nuts - Inserts for hand-operated and screwdriver bits and fasteners - Dimensions, torque test;
TS ISO 1173: 2001 Mounting tools for screws and nuts - Inserts for hand-operated and screwdriver bits and fasteners - Dimensions, torque test;
TS 291-4 ISO 603-1 Grinding wheels- Dimensions- Part 1: For inter-center cylindrical external grinding
TS 291-5 ISO 603-2 Grinding wheels- Dimensions- Section 2: For cylindrical external grinding without center
TS 291-6 ISO 603-3 Grinding wheels- Dimensions- Part 3: For cylindrical internal grinding
TS 291-7 ISO 603-4 Grinding wheels- Dimensions- Part 4: For surface grinding / peripheral grinding
TS 291-8 ISO 603-5 Grinding wheels- Dimensions- Part 5: For face grinding / face grinding
TS 291-9 ISO 603-6 Grinding wheels- Dimensions- Part 6: For grinding of tools in tool and machine tools
TS 291-10 ISO 603-7 Grinding wheels- Dimensions- Part 7: For manual grinding
TS 291-11 ISO 603-8 Grinding wheels- Dimensions- Section 8: For surface cleaning and roughing / roughing
TS 291-12 ISO 603-9 Grinding wheels- Dimensions- Part 9: For high-pressure grinding
TS 291-13 ISO 603-10Stones- Dimensions- Section 10: For honing and precision finishing
TS 291-14 ISO 603-11Grinding wheels- Dimensions- Section 11: Hand grinding bars
TS 291-15 ISO 603-12Stones- Dimensions- Section 12: For horizontal cleaning and roughing of the horizontal grinder
TS 291-16 ISO 603-13Stones- Dimensions- Section 13: For surface cleaning and roughing of vertical grinders
TS 291-17 ISO 603-14 Grinding wheels- Dimensions- Section 14: For surface cleaning and roughing / roughing of an angle grinder
TS 291-18 ISO 603-15Stones - Dimensions- Section 15: For cutting on stationary or moving cutting machines
TS 291-19 ISO 603-16 Grinding wheels- Dimensions- Part 16: For cutting on hand-held power-driven machines
TS EN 1011-4 Welding - Recommendations for welding metallic materials - Part 4: Arc welding of aluminum and aluminum alloys
TS EN 1011-5 Welding - Recommendations for welding metallic materials - Part 5: Welding of clad steels
TS EN 1011-6 Welding - Recommendations for welding metallic materials - Part 6: Laser beam welding
TS EN 1011-7 Welding - Recommendations for welding metal materials - part 7: Welding by electron beam welding
TS EN 1011-8 Welding - Recommendations for welding metal materials - part 8: Welding of cast iron "
TS EN 1011-1 Welding-Recommendations for welding metallic materials-Part 1: General guide for arc welding
TS EN 1395-3 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
TS EN 1395-4 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
TS EN 1395-5 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in the cell
TS EN 1395-6 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
TS EN 1395-7 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder supply systems
TS EN 1395-1 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements
TS EN ISO 1456 Metallic and other inorganic coatings - Nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium coatings with electrolytic accumulation
TS EN ISO 1460 Metallic coatings-Hot-dip galvanized coatings on iron-based materials-Gravimetric determination of mass per unit area
TS EN ISO 1463 Metallic and oxide coatings - Coating thickness measurement - Microscopic method
TS EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for the analysis of smoke particles
tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for analysis of smoke particles
tst 1542 EN ISO 1463Metal and oxide coatings - Coating thickness measurement - Microscopic method
TS EN 1547 + A1 Heat treatment equipment - Industrial use - Heat treatment equipment including auxiliary treatment equipment - Noise test code for industrial use
TS ISO 1701-1 Milling machines - Table height variable - Accuracy test section 1: Machines with horizontal spindle
TS ISO 1701-2 Milling machines - Table height variable - Accuracy test section 1: Machines with vertical spindle
TS EN 1708-2 Welding - Details of the main weld joint in steel - Part 2: Components without internal pressure
TS EN 1708-1 Welding - Details of the main weld joint in steel - Part 1: Pressure-applied components
TS 1729 EN ISO 2064Metal and other organic coatings - Definitions and rules for thickness measurement
TS 1729 EN ISO 2064Metal and other organic coatings - Definitions and rules for thickness measurement
TS EN ISO 28723: 2011 Glass and porcelain enamels - Determination of edge coating on enamelled steel plate to be used in heat exchangers
TS EN 1792 Welding - Terms for welding and related operations and their equivalents in various languages
TS 1885 ISO 2093 Electrolytic tin coatings - Properties and test methods
TS EN ISO 28763: 2011 Glass and porcelain enamels - Innovative, enamelled and packaged panels for air-gas and gas-gas heat exchangers - Specification
TS EN ISO 2081 Metallic and other inorganic coatings - Electrolytic zinc coatings with additional treatment on iron or steel
TS EN ISO 2082 Metallic and other inorganic coatings - Electrolytic cadmium coatings on iron or steel with additional treatment
TS ISO 2236 Assembly kits for screws and nuts - Forged and tubular wrenches - Maximum head external dimensions
TS ISO 2283 Manuals - Reduced Long Handle - Nominal Diameter m3 - M4 and 1 / 8-1
TS EN ISO 2361 Electrolytic accumulation of nickel on magnetic and non-magnetic substrates-Coating thickness determination-Magnetic method
TS 59-4 ISO 2380-2 Assembly kits for bolts and nuts - Screwdrivers for flat-head bolts - Part 4: General rules, bayonet lengths and marking for hand-operated screwdrivers
TS 2392 ISO 2179Electrolytic tin nickel alloy coatings - Properties and test methods
TS ISO 2437 Recommended x-ray inspection application for fusion welded joints for aluminum and aluminum alloys and thicknesses of 5 mm to 50 mm and for magnesium and magnesium alloys
TS ISO 2540 Drill bits for tailstock holes with protection countersinks - Type b
TS ISO 2541 Drill bits for arc tailstock holes - Type r
TS EN ISO 2560: 2009Welding consumables - Covered electrodes for manual metal arc welding of unalloyed and fine-grained steels - Classification
TS EN 2574 Aviation series - Resources - Technical data
TS 2674 EN ISO 2360 Insulating coatings on non-magnetic, conductive base materials - Measurement of coating thickness - Amplitude sensitive eddy current method
TS 2675 EN 12373-7 Aluminum and aluminum alloys - Anodic oxidation (anodizing coating) - Part 7: Quality assessment by measuring the loss of mass after dipping into acid phosphoric acid / chromic acid solution after pore closure of acid pretreated coatings
TS 2784 EN 60240-1 Characteristics of electric infrared emitters used in industry for heating purposes section 1: Short-wave infrared emitters
TS ISO 2806 Automation systems - for industry - Numerical control of machines - Terms and definitions
TS EN ISO 28927-3 Hand-held portable power tools - Test methods for measuring vibration - Part 3: Polishing and rotary, smooth or variable orbit abrasives
TS 2967 EN ISO 2063 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminum and their alloys
TS 2967 EN ISO 2063 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminum and their alloys
TS ISO 3511-1 Process measurement control functions and instrumentation- Symbol representation section 1: Key features
TS ISO 3511-2 Process measurement control functions and instrumentation- Symbol representation section 2: Expansion of basic features
TS ISO 3511-3 Process measurement control functions and instrumentation- Symbol representation section 3: Detailed symbols for instrument interconnection diagrams
TS ISO 3511-4 Process measurement control functions and instrumentation-Symbol representation section 4: Basic symbols for process computer, interface and shared display control functions
TS EN ISO 3543 / AC Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS EN ISO 3543 / AC Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS ISO 3089 Machine tools - Self-centering - Hand-held mirrors - Single-jaw mirrors
TS ISO 3160-1 Watch cases and accessories-Gold alloy finishes section 1: General principles
TS 3290 EN ISO 3868 Metallic coatings and other non-organic coatings-Measurement of coating thicknesses -Fizeau-Polychromatic radiation-Interferometry method
TS 3290 EN ISO 3868 Metallic coatings and other non-organic coatings-Measurement of coating thicknesses -Fizeau-Polychromatic radiation-Interferometry method
TS ISO 3291 Drills - Helical - Very long morse taper shank
TS ISO 3292 Drills - Helical - Very long cylindrical shank
TS ISO 3338-1 Cylindrical shanks for milling cutters part 1
TS ISO 3338-2 Cylindrical shanks for milling cutters section 2: Dimensional characteristics of notched cylindrical shanks
TS 3349 EN 22401 Covered electrodes-Determination of yield, metal recovery and fill coefficient
TS ISO 3439 Drills, helical, with cylindrical shank, stepped, for boring before tapping
TS ISO 3442-1 Machine tools- Dimensions and geometric tests of two-part jaw, self-centering chucks Part: 1 hand-turning lathes with lamp and mortise jaws
TS ISO 3442-3 Machine tools- Dimensions and geometric tests of two-part jaw, self-centering chucks Part 3: Power-driven lathes with knurled jaws
TS ISO 3442-2 Machine tools- Dimensions and geometric tests of two-part jaw, self-centering chucks Part: Power driven lathe chucks with 2 lamp and mortise jaws
TS ISO 3511-1 Process measurement control functions and instrumentation- Symbol representation section 1: Key features
TS ISO 3511-2 Process measurement control functions and instrumentation- Symbol representation section 2: Expansion of basic features
TS ISO 3511-3 Process measurement control functions and instrumentation- Symbol representation section 3: Detailed symbols for instrument interconnection diagrams
TS ISO 3511-4 Process measurement control functions and instrumentation-Symbol representation section 4: Basic symbols for process computer, interface and shared display control functions
TS EN ISO 3543 / AC Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS EN ISO 3543 / AC Metallic and non-metallic coatings - Thickness measurement - Beta back scattering method
TS 3620 ISO 230-1 Inspection and testing principles of machine tools section 1: The geometric accuracy of machines under no-load or machining conditions
TS EN ISO 8249 Welding - Determination of ferrite number of austenitic and duplex ferritic - austenitic cr-Ni stainless steel welding materials
TS EN ISO 8253-1: 2010 Acoustics - Audiometric test methods- Part 1: Basic pure tone air and bone conduction threshold audiometry
TS EN ISO 8289 Glass and porcelain enamels - Determination and location of defects - Low voltage test
TS ISO 8291 Glass and porcelain enamels-Determination of self-cleaning properties
TS 8414 EN 14163 Oil and gas industries - Pipeline transport systems - welding of pipelines
TS EN ISO 8501-2 (Formerly: TS ISO 8501-2) Preparation of steel surfaces - Before application of paint and related materials - Visual inspection of surface cleaning - Part 2: Degree of preparation of coated steel substrates after partial removal of previous coating
TS EN ISO 8501-4 Preparation of steel substrates prior to application of paints and paint-related products - Evaluation of surface cleanliness - Part 4: Initial surface conditions in connection with high pressure water spray, preparation classes and abrasion classes
TS ISO 8501-2: 1999 / T1 (Number amendment, TS EN ISO 8501-2) Preparation of steel surfaces - Before application of paints and related materials - Visual inspection of surface cleaning - Part 2: Preparation of coated steel substrates after partial removal of previous coating degrees
TS EN ISO 9455-6 Soft solder powders - Test methods - Part 6: Determination and determination of halide content (excluding fluoride)
TS EN ISO 9455-9 Soft soldering powders-Test methods-Part 9: Determination of ammonia content
TS EN ISO 9455-9 Soft soldering powders-Test methods-Part 9: Determination of ammonia content
TS EN 10289 Steel pipes and fittings for onshore and offshore pipelines - External liquid epoxy and modified epoxy coatings
TS EN 10290 Steel pipes and fittings for coastal and offshore pipelines - External liquid-treated polyurethane and polyurethane-treated coatings
TS EN 10300: 2005 Steel pipes and fittings for coastal and offshore pipelines - Hot applied bituminous material for external coatings
TS EN 10301 Steel pipes and fittings for onshore and offshore pipelines - Friction reducing inner lining for the transport of non-corrosive gas
TS EN ISO 10308 Metallic coatings - Review of porosity tests
TS ISO 10309 Metallic coatings-Porosity tests-Ferroxil test
TS EN 10310 Steel pipes and fittings - for offshore and offshore pipelines - polyamide powder-based interior and exterior coatings
TS EN 10318 Determination of thickness and chemical composition of zinc and aluminum based metallic coatings - Routine method
TS EN ISO 11124-1 Preparation of steel surfaces - Before the application of paint and related materials - Properties of metallic abrasives sprayed with compressed air section 1: General description and classification
TS EN ISO 11124-2 Metallic abrasives used with compressed air for the preparation of steel surfaces, the application of paints and the like part 2: Grits-Cast iron parts
TS EN ISO 11124-3 Preparation of steel surfaces - Before the application of paints and related materials - Properties of metallic abrasives sprayed with compressed air section 3: High carbon steel casting balls and grit
TS EN ISO 11124-4 Preparation of steel surfaces - Before the application of paints and related materials - Properties of metallic abrasives sprayed with compressed air section 4: Low carbon steel casting balls
TS EN ISO 11125-2 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 2: Particle size
TS EN ISO 11125-3 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 3: Determination of hardness
TS EN ISO 11126-10 (Former number: TS ISO 11126-10) Preparation of steel surfaces - Before the application of paint and related materials - Properties of non-metallic abrasives used in spray cleaning - section 10: Almandite garnet
TS EN ISO 11126-1 Preparation of steel surfaces - Before the application of paint-related materials - Properties of non-metallic abrasives used for spray cleaning - Part 1: General introduction and classification
TS EN ISO 11126-3 Preparation of steel surfaces - Before application of paint-related materials - Properties of non-metallic abrasives used for spray cleaning - Part 3: Refined copper slag
TS EN ISO 11126-6 Preparation of steel surfaces - Before the application of paint and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 6: Iron furnace slag
TS EN ISO 11126-7 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 7: Molten aluminum oxide
TS EN ISO 11126-8 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for spray cleaning - Part 8: Olivine sand
TS EN 14656 + A1 Safety in machinery - Safety requirements for extrusion presses of steel and non-ferrous materials
TS EN ISO 14713-2 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 2: Hot dip galvanizing
TS EN ISO 14713-3 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN ISO 14713-3 / AC Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN 14728 Defects in thermoplastic welds-Classification-
TS EN 14730-1 Railway applications - Railway - Alumino thermal welding of rails - Part 1: Approval of welding processes
TS EN 14730-2 Railway applications - Ventilation for urban and suburban towing and towing vehicles - Part 2: Qualification of Alumino thermal welders, approval of contractors and acceptance of resources -
TS EN 14730-1 + A1: 2010 Railway applications - Railway - Alumino thermal welding of rails - Part 1: Approval of welding processes
TS EN ISO 14744-5 Welding - Acceptance inspection of electron beam welding machines section 5: Measurement of distorted lines
TS EN ISO 14744-6 Welding - Acceptance inspection of electron beam welding machines section 6: Balance measurement of spot position (iso 14744-6: 2000)
TS EN ISO 14744-2 Welding - Acceptance inspection of electron beam welding machines - part 2: Measurement of accelerator voltage characteristics
TS EN ISO 14744-3 Welding - Acceptance inspection of electron beam welding machines - part 3: Measurement of beam current characteristics
TS EN ISO 14744-4 Welding - Acceptance inspection of electron beam welding machines - part 4: Measurement of welding speed
TS EN ISO 14744-1 Welding - Acceptance inspection of electron beam welding machines - Part 1: Rules and acceptance requirements
TS EN ISO 14922-1 Thermal spray-Quality characteristics of heat-treated metal materials-Part 1: Selection and operating instructions
TS EN ISO 14922-2 Thermal spray-Quality characteristics of heat-treated metal materials-Part 2: Comprehensive quality characteristics
TS EN ISO 14922-3 Thermal spray-Quality properties of heat-treated metal materials-Part 3: Standard quality specifications
TS EN ISO 14922-4 Thermal spray-Quality characteristics of heat-treated metal materials-Part 4: Basic quality characteristics
TS EN ISO 14924 Thermal spraying - Finishing and finishing of thermal spray coatings
TS EN ISO 15011-4 / A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet
TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 3: Determination of ozone concentration using fixed point measurements during arc welding
TS EN ISO 15011-4 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke datasheet
TSE ISO / TR 15235 Preparation of steel surfaces - before the application of paints and related products - Information on the effects of water-soluble salt pollution levels
TS EN 15339-2 Thermal spraying - Safety requirements for thermal spraying equipment - Part - 2: Gas control units
TS EN 15340 Thermal spraying - Determination of the shear load resistance of thermal spray coatings
TS EN 15594 Railway applications -Railway-Rails repair by electric arc welding
TS EN ISO 15607 Specification and specification of welding procedure for metallic materials -General rules
TS EN ISO 15609-4 Specification and specification of welding procedures for metallic materials - Welding procedure specification - Section 4: Laser beam welding
TS EN ISO 15610 Specification and specification of welding procedures for metallic materials - Characterization based on tested welding consumables
TS EN ISO 15611 Specification and specification of welding procedures for metallic materials - Characterization based on previous welding experience
TS EN ISO 15612 Specification and specification of welding procedures for metallic materials - Characterization by adopting a standard welding procedure
TS EN ISO 15613 Specification and specification of welding procedures for metallic materials - Characterization based on pre-manufacture welding test
TS EN ISO 15614-4 Specification and specification of welding procedure for metallic materials -Welding procedure test-Section 4: Finishing welding of aluminum castings
TS EN ISO 15614-11 Specification and specification of welding procedures for metallic materials - Welding procedure test - part 11: Electron and laser beam welding
TS EN ISO 15614-4 / AC Welding procedure specification and qualification for metallic materials -Welding procedure test-Part 4: Finishing welding of aluminum castings
TS EN ISO 15614-3 Specification and classification of welding procedures for metal materials-Welding test procedure-Section 3: Melt welding of non-alloy and low alloy cast irons
TS EN ISO 15614-10 Specification and specification of welding procedure for metallic materials -Welding procedure test-Part 10: Hyperbaric dry welding
TS EN ISO 15614-6 Specification and specification of welding procedure for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 15614: Arc welding of aluminum and its alloys TS EN ISO 2-2
TS EN ISO 15620 Welding - Friction welding of metallic materials
TS ISO 15635 Coated abrasives
TS EN 15646 Electrodeposited coatings - Electrodeposition of silver and silver alloys for engineering purposes - Specifications and test methods
TS EN 15648 Quality component for thermal spray-treatment
TS EN ISO 15695 Glass and porcelain enamels - Determination of scratch resistance of enamel products
TS EN ISO 15720 Metallic coatings - Porosity tests - Porosity by gelling electrography on gold or palladium coatings on metal substrates
TS EN ISO 15721 Metallic coatings - Porosity tests - Determination of porosity of sulphurous acid / sulfur dioxide in gold or palladium coatings
TS ISO 15730 Metallic and other inorganic coatings - Electrolytic polishing as a means of surface smoothing and passivation in stainless steel
TS EN ISO 15744 Power tools - Noise measurement code - Engineering method (degree 2)
TS EN 15773 Industrial application of hot-dip galvanized or striped steel materials (duplex systems) - Specifications, recommendations and guidance
TS ISO 15787 Technical product documentation - Parts of heat-treated iron-based material - Demonstration and information
TS EN ISO 15792-1 Welding consumables - Test methods - Part 1: Test piece for pure weld metal test specimens in steel, nickel and nickel alloys
TS EN ISO 15792-2Welding consumables - Test methods - Part 2: Preparation of test specimens for single and double pass technical test pieces in steel
TS EN ISO 16348 Metallic and other inorganic coatings - Terms and conditions of appearance
TS EN ISO 16348 Metallic and other inorganic coatings - Terms and conditions of appearance
TS EN ISO 16432 Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using inflated projections
TS EN ISO 16433 Resistance welding - Procedure for resistance welding of coated and uncoated low carbon steels.
TS EN ISO 17640: Non-destructive testing of welds - Ultrasonic testing-Techniques, test limits and evaluation
TS 283-3 EN ISO 17642-3 Destructive testing of welds in metal materials - Cold cracking tests of welded structures - Arc welding processes - Part 3: External loading tests
TS EN ISO 17652-1 Welding - Workshop test book on welding and related processes - Part 1: General requirements
TS EN ISO 17652-2 Welding - Workshop test book on welding and related processes - Part 2: Welding characteristics of the workshop
TS EN ISO 17652-3 Welding - Workshop test book on welding and related processes - Part 3: Thermal cutting
TS EN ISO 17652-4 Welding - Workshop test for welding and related processes - Part 4: Smoke and gas emission
TS EN ISO 17657-1 Resistance welding - Welding current measurement for resistance welding - Part 1: Measurement guide
TS EN ISO 17657-3 Resistance welding - Welding current measurement for resistance welding - Part 3: Current-sensing coil
TS EN ISO 17657-5 Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of the welding current measuring system
TS EN ISO 17657-2 Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil
TS EN ISO 17659 Welding - Examples of terms in several languages for welded joints (iso 17659: 2002)
TS EN ISO 17660-2 Welding - Welding of reinforced steels - Part 2: Welded joints not subject to load
TS EN ISO 17660-1 Welding - Welding of reinforced steels - Part 1: Welded joints under load
TS EN ISO 18332 Metallic and other inorganic coatings - Recipes for porosity
TS EN ISO 18592 Resistance welding - Non-destructive testing of welds - Method for fatigue testing of multi-spot welding parts
TS EN ISO 18594 Resistance point - Projection and seam welding - Method for determination of transition resistance on aluminum and sheet materials
TS EN ISO 18595 Resistance welding-Spot welding of aluminum and aluminum alloys-Weldability, welding and tests
TS EN ISO 19439 / AC Project integration - Framework for project modeling
TS EN ISO 19440 Enterprise integration - Creates enterprise modeling for
TS EN ISO 21968 Non-magnetic metallic coatings on metallic and non-metallic base materials - Coating thickness measurement - Phase sensitive eddy current method
TS EN 22568 Threaders and die arms - Manual and machine-operated
TS EN ISO Acceptance tests for 22827-2 Yag laser beam welding machines- Optical fiber transport machines-Part 2: Motion mechanism
TS EN ISO 22829 Resistance welding - Transformer-Rectifier for welding guns connected to transformers - Transformer-Rectifier operating at 1000hz frequency
TS EN 22857 Guides - Grinded screw - Tolerance class 4 h - For normal and fine pitch iso metric screws with 8h and 4 g - 6g - Production tolerances in the screw section
TS EN ISO 23279 Non-destructive testing of sources - Ultrasonic inspection - Characterization of symptoms in sources
TS EN ISO 24034: 2010 Welding consumables - Solid wire and solid rods for fusion welding of titanium and titanium alloys - Classification
TS EN ISO 28721-3: 2011 Glass and porcelain enamels - Glass lined devices for processing plants - Part 3: Resistance to thermal shock
TS EN ISO 28927-4: 2010 Hand-held portable power tools-Measurement of vibration in the handle-Section 4: Grinders
TS EN ISO 28927-10: 2011 Hand-held portable power tools - Test for measuring vibration in the handle - Part 10: Impact drills, hammers, hammers
TS EN ISO 28927-2 Hand-held portable power tools - Test methods for measuring vibration - Part 2: Switches. screwdrivers and wrenches
TS EN ISO 28927-6 Hand-held portable power tools - Test methods for measuring vibration - Part 6: Rammers
TS EN ISO 28927-8 Hand-held portable power tools - Test methods for measuring vibration - Part 8: Circular saws and files or oscillating and rotary saws
TS EN ISO 28927-9 Hand-held portable power tools - Measurement of vibrations in the handle - Part 9: Scaler hammers and needle scrapers
TS EN ISO 28927-1 Hand-held portable power tools - Test methods for measuring vibration - Part 1: Angle and vertical grinding machines
TS EN ISO 28927-11: 2011 Hand-held portable power tools - Test methods for measuring vibration - Part 11: Stone hammers
TS EN 29090 Gas tightness of equipment for gas welding and related operations
TS EN 29455-11 Soft solder powders - Test methods - part 11: Solubility of powder residues
TS EN 29455-14 Soft solder powders - Test methods - Part 14: Determination of viscosity of dust residues
TS EN 29885 Glass containers - Wide rim - Deviation of the sealing top edge from the smoothness - Test methods
TS EN 50109-2-1Compaction hand tools - Tools for the crimp termination of electrical cables and wires of low frequency and radio frequency applications - Part 2-1: Specific requirements for coaxial contacts and radio frequency connectors - Dimensions a to e, v open mouth tools with fixed teeth ranging from and w
TS EN 50109-2-2 Compression hand tools - Tools for clamping termination of electrical cables and wires of low frequency and radio frequency applications - Part 2-2: Special requirements for coaxial contacts and radio frequency connectors - Dimensions a to g, Tools with open mouths for removable and interchangeable teeth ranging from q to t, v and w
TS EN 50109-2-4 Compression hand tools - Tools for the crimping of electrical cables and wires of low frequency and radio frequency applications - Part 2-4: Particular requirements for central contacts of the RF connectors of the Smz series
TS EN 50144-2-7 Safety of handpieces - Electric motor part 2-7: Special rules for spray guns
Safety of electric hand driven tools - Section 50144-2: Particular requirements for grinders, disc-type abrasives and polishers
TS EN 50260-2-7 Hand-operated battery-operated, safety devices and battery slots - Part 2-7: Special rules for spray guns
EN 50260-2-7 Safety of hand-powered battery-powered power tools and battery slots - Part 2-7: Special rules for spray guns
TS EN 50519 Evaluation of exposure of employees to electrical and magnetic fields from industrial induction heating equipment
TS EN 60216-4-3 Electrical insulation materials - Thermal resistance properties - Part 4-3: Aging ovens - Multicellular ovens
TS EN 60239 Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for electric arc furnaces
TS EN 60382 Analog pneumatic marking for process control systems
TS EN 60546-1: 2010 Industrial process- Control circuits used in control systems- Analogue signal circuits 1: Performance evaluation methods
TS EN 60534-2-5 Industrial process control valves - Part 2-5: Flow rate capacity and dimensioning for liquid flow through multistage control valves with stepped improvement
TS EN 60534-9 Industrial process control valves - Part 9: Test procedure for response measurement from step data
60534-8-3: 2011 Industrial process control valves-Part 8: Noise characteristics-Section 3: Control valve aerodynamic noise estimation method
TS EN 60534-8-1 Industrial process control valves - Part 8: Determination of noise - Part 1: Hydrodynamics in control valves - Measurement of noise due to aerodynamic flow in the laboratory
tst EN 60534-4 Industrial process control valves - Part 4: Inspection and routine tests
TS EN 60654-1 Process measurement and control equipment used in industry; Operating conditions-Part 1: Climate conditions
TS EN 60654-2 Operating conditions of industrial-process measuring and control devices-Section 2: Power
TS EN 60654-3 Operating conditions of industrial-process measuring and control devices-Section 3: Mechanical effects
TS EN 60654-4 Operating conditions of industrial-process measuring and control devices - Section 4: Corrosive and corrosive effects
TS EN 60745-2-4 Hand held motor powered tools - Safety - Part 2-4: Particular requirements for non-disk shaped abrasives and polishers
TS EN 60745-2-4 Hand held motor powered tools - Safety - Part 2-4: Particular requirements for non-disk shaped abrasives and polishers
TS EN 60745-2-4 Hand held motor powered tools - Safety - Part 2-4: Particular requirements for non-disk shaped abrasives and polishers
60745-2-18 / tst A1 Hand operated powered electrical tools - Safety - Part 2-18: Special requirements for strip winding tools
60745-2-18 / tst A1 Hand operated powered electrical tools - Safety - Part 2-18: Special requirements for strip winding tools
Hand operated motor powered tools - Safety - part 60745-2: Particular requirements for hammers - 6-12-2 / tst A6
TS EN 60745-2-21 Hand held motor powered tools - Safety - Part 2-21: Particular requirements for duct cleaners
60745-2 / A19: 1 Hand-held electrical power tools - Safety - Part 2010-2: Special requirements for planer machines
TS EN 60745-2-20 / A1 Hand-held power tools - Safety - Part 2-20: Particular requirements for band saws
TS EN 60745-2-4 / tst A1 Hand-held power-operated power tools - Safety - part 2-4: Special rules for non-disc-shaped abrasives and polishers
TS EN 60745-2-6 Hand operated motor powered tools - Safety - Part 2-6: Particular requirements for hammers
60745-2-5: 2010 Hand held motor powered tools - Safety - Part 2-5: Special rules for circular saws
60745-2-9 / tst A1 Hand held motor powered tools - Safety - Part 2-9: Special rules for threaders
TS EN 60745-2-19 Hand operated motor powered tools - Safety - Part 2-19: Special requirements for planer machines
TS EN 60745-2-2 Hand-held power-operated electric tools - Safety - Part 2-2: Special rules for screwdrivers and impact wrenches
TS EN 60745-2-2 Hand-held power-operated electric tools - Safety - Part 2-2: Special rules for screwdrivers and impact wrenches
TS EN 60745-2-1 Hand-held power-operated electric tools - Safety - Part 2-1: Special rules for drills and impact drills
TS EN 60745-2-1 Hand-held power-operated electric tools - Safety - Part 2-1: Special rules for drills and impact drills
TS EN 60745-2-18 Hand-held motor powered tools - Safety - Part 2-18: Special requirements for strip winding tools
TS EN 60745-2-20 Hand held motor powered tools - Safety - Part 2-20: Special rules for band saws
Special rules for hand-held saw blades (pick and sword saws) - Safety - Part 60745-2: Hand held motor powered tools - Safety - Part 11-1-2 / tst A11
Particular features for screwdrivers and impact wrenches - Safety - Part 60745-2: Hand held motor powered tools - Safety - Part 2-1-2 / tst A2
60745-2-20 / tst A1 Hand-held powered power tools - Safety - Part 2-20: Special rules for band saws
Hand operated motor powered tools - Safety - part 60745-2: Particular requirements for hammers - 6-2-2 / tst A6
60745-2-8 / tst A1 Hand-held motor powered tools - Safety - Part 2-8: Special rules for shears and drilling machines
TS EN 60873-1 Electrical and pneumatic analogue chart recorders for industrial process control systems - Part 1: Performance evaluation methods
TS EN 60873-2 Electrical and pneumatic analog graphic recorders for industrial process control systems - Part 2: Guide for visual inspection and routine testing
TS EN 60974-9 Arc welding equipment - Part 9: Installation and operation
Safety regulations - for portable electric motor powered tools - section 61029-2: Particular requirements for single-work vertical vertical engraving tools
Safety regulations - for portable electric motor powered tools - section 61029-2: Particular requirements for single-work vertical vertical engraving tools
TS EN 61069-4 Industrial process measurement and control-Evaluation of system properties in terms of system evaluation purpose-Part 4: Evaluation of system performance
TS EN 61131-1 Programmable control devices - Part 1: General information
TS EN 61158-4-16 Industrial communication networks - Fieldbus specifications - Part 4-16: Data link layer protocol specifications - Type 16 elements
TS EN 61176 Circular saws - Hand held, electrically operated - Performance measurement methods
TS EN 61190-1-3 Fastening materials for electronic assembly - Part 1-3: Rules for flux and flux solid soldering for electronic soldering and electronic soldering
TS EN 61298-1: 2008 Process measurement and control devices -General methods and procedures for performance evaluation-Section 1: General considerations
TS EN 61298-2: 2008 Process measurement and control devices -General methods and procedures for performance evaluation-Section 2: Tests for application requirements
TS EN 61298-3: 2008 Process measurement and control devices -General methods and methods for performance evaluation-Section 3: Tests for the effects of the effecting quantity
TS EN 61307: 2011 (EN) Industrial microwave heating installation - Test methods for determining output power
TS EN 61308 Dielectric heating systems - High frequency - Test methods for determination of output power
TS EN 61326-3-1 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 3-1: Immunity of devices for the implementation of safety-related systems and safety-related functions - General industrial applications
TS EN 61326-3-2 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 3-2: Immunity of devices for the implementation of safety-related systems and safety-related functions - Industrial applications in certain electromagnetic environments
TS EN 61508-1 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 1: General requirements
TS EN 61508-2 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 2: Guidelines for safety-related electrical or electronic or programmable electronic systems
TS EN 61508-3 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 3: Software requirements
TS EN 61508-4 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 4: Definitions and abbreviations
TS EN 61508-7 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 7: Examination of techniques and measures
TS EN 61511-1 Functional safety - Safety instrumented systems for the process industry - Part 1: Framework, recipes, system, hardware and software rules
TS EN 61511-3 Functional safety - Safety instrumented systems for the process industry - Part 3: Guidelines for determining the required safety integrity levels
TS EN 61512-1 Lot control - Part 1: Substances and terminology
TS EN 61512-4: 2010 Batch control - Part 4: Batch production records
TS EN 61784-3-8: 2010 Industrial communication networks - Preferences - Part 3-8: Functional safety fieldbuses - Cpf Additional features for 8
TS EN 61784-3-6: 2010 Industrial communication networks - Preferences - Part 3-6: Functional safety fieldbuses - Cpf Additional features for 6
TS EN 61784-3-3: 2010 Industrial communication networks - Preferences - Part 3-3: Functional safety fieldbuses - Cpf Additional features for 2
TS EN 61784-3-13: 2010 Industrial communication networks - Preferences - Part 3-13: Functional safety fieldbuses - Cpf Additional features for 13
TS EN 61922 High-frequency induction heating systems - Test methods for determining the output power of the generator
TS EN 62061 Machine safety - Functional safety of electrical, electronic and programmable electronic control systems for safety
TS EN 62061: 2005 / AC: 2010 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
TS EN 62264-3 Company controlled system integration - Part 3: Operational models of production operations management
TS EN 62419 Control technology - Rules for the display of measuring instruments
TS EN 62453-301 Field instrument instrument (fdt) interface specifications - Part 301: Communication profile integration - Iec 61784 cpf 1
TS EN 62453-303-1 Field instrument instrument (fdt) interface specifications-Section 303-1: Communication profile integration -Iec 61784 cp 3 / 1 and cp 3 / 2