Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards.
TS ISO 6552 Automatic steam traps-Definitions of technical terms
TS ISO 5598 Fluid power systems and components-Terms
TS ISO 6107-8 Water quality - Terms - Section 8
TS EN 28653 Jewelery-Ring sizes-Description, measurement and brief display
TS ISO 10185 Tobacco and tobacco products-Dictionary
TS EN 25968 Threaders - Terms
TS ISO 8540 Presses - Mechanical - Open front - Terms
TS EN 60276 Description and classification of coal brushes, brush carriers, collectors and rings
Tests for general properties of aggregates 10088: Process and terminology for simplified petrographic identification
TS EN ISO 862 Surfactants - Terms and definitions
TS EN 633 Cemented particle boards - Description and classification
TS EN 844-1 Round and sawn wood (lumber) - Terms - Part 1: General terms for round and sawn wood
TS EN 10001Pic iron description and classification
TS EN 844-2 Round and sawn wood (lumber) - Terms - Part 2: General terms for round wood
TS EN 844-4 Round and sawn wood (timber) terms - Part 4: Terms related to moisture content
TS EN 1659 Diagnostic systems used outside the body - Microbiology culture media terms and descriptions
TS EN 1868 Fall protection personnel - List of equivalent terms
TS EN 247 Heat exchangers - Terms and recipes
TS EN 60383-1 Insulators for air lines Section with rated voltage above 1000 volts 1: Definitions, test methods and acceptance criteria for ceramic or glass insulator units-AA systems
TS EN ISO 8092-1 Road vehicles - Connections for surface electrical installation - Single pole connection tables - Dimensions and special requirements
TS EN 60633 High-voltage direct current energy transport terminology
TS EN 12325-3 Irrigation techniques - Circular and linear moving (central axis and laterally moving) systems - Part 3: Technical terms and classification
TS EN 12433-2 Doors - Industrial and commercial buildings and garages - Terms and descriptions - Part 2: Door sections
TS ISO 9802 Glass-Optical glass-Raw-Terms and recipes
TS EN 303-1 Boilers boilers with forced traction burner - Part 1: Terms and definitions general specifications experiments and marking
TS EN ISO 4617 Paints and varnishes - Equivalent terms list
TS EN 132 Respiratory protection devices - Terms, descriptions and pictograms
TS EN 134Breathing apparatus - Nomenclature of components
TS EN 12944-1 Fertilizers and calcifying agents - Terms and definitions - Part 1: General terms
TS 5694 EN 12670Natural stones - Terms and recipes
TS ISO 12097-1 Road vehicles - Airbag components - Part 1: Terms
TS ISO 11838 Motorcycle and motorcycle driver kinematics - Terms and definitions
TS EN 10001 Description and classification of pig iron
TS 6956 EN ISO 4287 Properties of geometric products (gmö) - Surface structure: Profile method - Terms, descriptions and parameters of surface structure
TS ISO 6196-8 Micrographs - Terms and definitions - Part 8: Operation
TS EN ISO 8384 Ships and marine technology - Floating underwater dredging machines - Terms and recipes
TS 6781 EN ISO 4135 Anesthesia and breathing equipment - Terms and recipes
TS EN ISO 14588 Blind rivets - Terms and definitions
TS EN ISO 8384 Vessels and marine technology - Seabed dredging machines- Terms and recipes
TS EN 12481 Adhesive tapes-Terms and recipes
TS 4344 EN 13402-1 Indication of body sizes in garments with signs - Part 1: Terms, recipes and measurement of body size
TS EN ISO 4921 Knitting-Main concepts-Terms and recipes
TS EN ISO 13731 Ergonomics-Thermal environment-Terms and symbols
TS EN 12944-3 Fertilizers and liming materials-Terms and definitions-Part 3: Terms related to liming substances
TS ISO 8107 Nuclear power plants-Sustainability-Terms and definitions
TS ISO 12753-1Pergeller-Section 1: Naming, illustrations and equivalent terms
TS 2757 ISO 836Refractory materials-Terms and recipes
TS 1118-1 EN ISO 90-1 Thin metal containers - Definitions and determination of dimensions and capacities - Part 1: Open top boxes
Non-destructive testing-Terms and recipes-Section 1330: Non-destructive testing methods common terms
TS 5588 EN 60051-1 Electrical measuring instruments and accessories - Direct acting analogue display - Part 1: Definitions and general features common to all sections
TS EN ISO 105 A08 Textiles - Color fastness tests - Part a08: Terminology used in color measurement
TS EN 1330-10 Non-destructive testing - Terminology - Section 10: Terms used in visual examination
Laboratory materials - Injector - Part 8655: Terms, general specifications and instructions for use
Laboratory materials - Injector - Part 8655: Terms, general specifications and instructions for use
TS EN ISO 15867 Bulk cargo containers used for intermediate processing of non-dangerous goods (adyk)
TS EN 13556 Round and sawn wood (timber) - European timber terms
TS EN 13809 Tourism services - Travel agencies and tour operators - Terminology
TS EN 13857-1 Explosives for civil use - Part 1: Terminology
TS EN 13878 Temporary residence - Terms and description
TS EN 14057 Lead and lead alloys - Scrap - Terms and recipes
TS EN 14096-1 Non-destructive testing - Characterization of digitalization systems for radiographic films - Part 1: Definitions, qualitative measurements of image quality parameters, standard reference film and quantitative control
TS EN 14096-1 Non-destructive testing - Characterization of digitalization systems for radiographic films - Part 1: Definitions, qualitative measurements of image quality parameters, standard reference film and quantitative control
TS EN 14175-1 Fume cupboards - Part 1: Terms and directions
TS EN 14182Packaging - Terminology - Basic terms and definitions
TS EN ISO 14692-1 Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Terms, symbols, applications and materials
TS EN ISO 14692-1Oil and natural gas industry -Class fiber reinforced plastic pipes- Part 1: Terms, symbols, applications and materials
TS EN ISO 8388 Knitted fabrics - Species - Terms and definitions
TS EN 12258-3 Classification of aluminum and aluminum alloy scrap
TS EN 12258-3 Classification of aluminum and aluminum alloy scrap
TS EN 13232-1 Railway applications-Railway-Shears and intersecting railways-Part 1. recipes
TS EN ISO 15367-1 Laser and laser-related equipment - Test methods for determining the shape of the laser beam waveform - Part 1: Terms, descriptions and key features
TS EN ISO 18513 Tourism services - Hotels and other types of tourism accommodation - Terminology
TS EN 60383-1 / A11 Insulators for air lines - Part with rated voltage above 1000 volts 1: Ceramic or glass insulator units - Definitions, test methods and acceptance criteria for Aa systems
TS EN 1504-10 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
Ships and marine technology - Propulsion mechanisms for ships - Part 3715: Terms and definitions related to the propeller geometry
Ships and marine technology - Propulsion mechanisms for ships - Part 3715: Terms and definitions of controlled range propeller mechanisms
TS EN 12519 Windows and doors for pedestrians - Terms and descriptions
TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties
TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications
TS EN 45020 Standardization and related activities - General terms and descriptions
TS EN 1504-2 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 13970 Flexible sheets - For waterproofing - Bituminous sheets controlling water vapor transmission - Definitions and features
TS EN ISO 1968 Ropes and cords - Terms and definitions
TS EN 1748-1-1 Glass - Structures - special basic products - Borosilicate glasses - Part 1-1: Definitions, general physical and mechanical properties
TS EN 1748-2-1 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-1: Definitions, general physical and mechanical properties
TS EN 13816 Transport - Logistics and services - Public transport - Definition, objective and measurement of service quality
TS EN 13556 Round and sawn wood (timber) - Terminology of timber in Europe
TS EN 13809 Tourism services - Travel agencies and tour operators - Terminology
TS EN 13816Transport - Logistics and services - Public transport - Definition, objective and measurement of service quality
TS EN 13969 Flexible boards for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications
TS EN 13970 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications
TS EN 13969 Waterproofing flexible covers - Moisture resistant bituminous schists, including those used for storage on the ground floor - Definitions and characteristics
TS EN 764-3 Pressurized equipment - Part 3: Description of the parties concerned
TS EN 1001-1 Durability of wood and wood-based products-Terminology-Part 1: List of equivalent terms
TS EN ISO 11807-1 "integrated optics - Terms and definitions - Part 1: Basic terms and symbols"
TS EN ISO 11807-2 "integrated optics - Terms and definitions - Part 1: Basic terms and symbols"
TS EN ISO 14532 Natural gas-Dictionary
TS EN ISO 15902 Optics and photonics - Separating optics - Terms and definitions
TS EN 1748-1-1 Glass - Special basic products for construction - Borosilicate glass - Part 1-1: Definitions and general physical and mechanical properties
TS EN 1748-2-1 Glass - Special basic products used in structures - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties
TS EN 1330-8 Non-destructive testing-Terms-Part 8- Terms used for the tightness test
TS EN 1907 Rules for passenger transport - Safety rules - Terms and definitions
TS ISO 1122-2 Glossary of gear statements - Part 2: Definitions of worm gear geometry
TS EN 1504-3 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-10 / AC Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 14943 Communication services - Logistics - Glossary
TS EN 165 Eye protectors-Personal-Terms
TS ISO 5248 Textile machinery and accessories - Dyeing and finishing machinery - Terms and definitions for complementary devices
TS ISO 5234 Textile machinery and accessories - Metal comb wires - Dimensions, types and recipes for assembly
TS ISO 7839 Textile machinery and accessories - Knitting machines - Terms and classification
TS EN 1333 Flanges and connections - Pipe fittings - Description and selection of Pn
TS EN ISO 15902 Optics and photonics - Diffraction optics - Terms and definitions
TS EN 13969 / A1 Waterproofing flexible covers - Moisture resistant bituminous shales, including those used for storage on the ground floor - Definitions and characteristics
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 13969 / A1 Flexible sheets for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications 22.05.2007
TS EN 13970 / A1 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications
TS EN 62261-2 Television data - Part 2. data decoding protocol using key length value
TS EN 62261-2 Television data - Part 2. data decoding protocol using key length value
TS EN 1504-10 / AC Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1001-1 Durability of wood and wood-based products - Terminology - Part 1: List of synonyms
TS EN 14799 Air filters for general air purification - Terms and definitions
TS EN 14943 Transport services - Logistics - Glossary
TS EN 12944-3 Fertilizers and calcifying agents - Terms and definitions - part 3: Terms related to calcining agents
TS EN 15429-1 Garbage sweepers - Part 1: Terms and classification
TS ISO 6196-1 Micrographs - Terms and definitions - Part 1: General terms
TS ISO 6196-2 Micrographs - Terms and descriptions - chapter 2: Image positions and recording methods
TS ISO 6196-3 Micrographs - Terms and definitions - Part 3: Film processing
TS ISO 6196-4 Micrographs - Terms and recipes - Part 4: Materials and packaging
TS ISO 6196-5 Micrographs - Terms and definitions - Part 5: Image quality, readability, inspection
TS ISO 6196-6 Micrographs - Terms and definitions - Part 06: Hardware
TS ISO 6196-7 Micrographs - Terms and definitions - Part 7: Computer micrographs
tst EN ISO 8330 Rubber and plastic hoses and hose assemblies - Terms and definitions
TS EN ISO 12718 Nondestructive testing - Eddy current inspection - Dictionary
TS EN 15602 Private security service providers - Terminology
TS EN 15602 Private security service providers - Terminology
TS ISO 2395 Inspection screens and screening examination-Terms
TS EN 80000-6 Quantities and units - Part 6: Electromagnetism
Optics - Eye - Contact lenses - Part 18369: Recommendations for terms, classification system and labeling specifications TS EN ISO 1-1 / A1
TS EN 12374 Packaging - Flexible tubes - Terms
TS ISO 18650-1 Construction machinery and equipment - Cement mixers - Part 1: Terminology and general features
TS ISO 18650-2 Construction machinery and equipment - Cement mixers - Part 2: Method for inspection of the mixture
TS EN ISO 676 Seasonings and condiments-Botanical naming
TS EN ISO 14050 Environmental management - Terms and definitions
TS EN 15707 Print media research - Terms and rules of service
TS EN ISO 5492 Sensory analysis - Terms and definitions (ISO 5492: 2008)
tst EN ISO 1942 Dentistry - Terms (ISO 1942: 2009, Corrected version 2010-03-01)
Optics - Eye - Contact lenses - Part 18369: Recommendations for terms, classification system and labeling specifications TS EN ISO 1-1 / A1
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 12440 Natural stones - Naming criteria
TS EN 62341-1-2 Organic light-emitting diode screens-Part 1-2: Terms and letter symbols
TS EN 15714-1 Industrial valves - Actuators - Part 1: Terms and definitions
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS EN 61508-6 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 6: Guidelines for the application of IEC 61508-2 and IEC 61508-3
TS ISO 3828 Shipbuilding and marine structures - Deck machinery - Terms and symbols
TS ISO 633 Cork oak cork - Terms recipes
TS EN 14057 Lead and lead alloys - Scrap - Terms and recipes
TS EN 1317-1: 2010 Road railing systems section 1: General criteria for terminology and test methods
TS EN ISO 13943 Fire safety - Terms and definitions
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN ISO 2080 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Glossary
TS EN 15878 Steel static storage systems - Terms and definitions
TS EN 13965-2 Waste characterization - Terms - Chapter 2: Management terminology and descriptions
TS ISO 3911 Wheels and rims for pneumatic tires - Terms and descriptions, short designation and marking
TS EN ISO 4063 Welding and welding processes - Nomenclature of operations and reference numbers
TS ISO 6726 Mopeds and two-wheel motorcycles - Masses - Terms and recipes
TS ISO 611Road vehicles - Braking systems of motor vehicles and their trailers - Terms
TS ISO 830 Freight containers
TS ISO 1176 Road Vehicles - Masses - Terms, recipes and codes
TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances
TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers
TS EN 60763-1 Requirements for laminated prespen - Part 1: Definitions, classification and general rules
TS EN 1264-1 Floor heating and cooling systems - Water-based - part 1: Definitions and symbols
TS EN 15241 / AC Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN ISO 11073-10407 Health informatics-Personal health device communication- Part 10407: Device identification- Blood pressure monitoring
TS EN ISO 11073-10408 Health informatics-Personal health device communication- Part 10408: Device identification- Thermometer
TS EN ISO 12780-2 Properties of geometric products (gmö) -Requality-Section 2: Special operations
TS EN 2757 Aviation series - Structural bonding system - Test method - Determination of drying and burning residues of primers
TS EN ISO 9092 Textile - Nonwoven - Recipe
TS EN ISO 11073-10471 Health informatics-Medical device communication maintenance point- Part 10471: Device identification- Independent live activity center
TS EN ISO 25239- 1Friction mixing source - Aluminum - Part 1: Glossary
TS EN ISO 26800 Ergonomics - General approach, principles and concepts
ISO EN ISO 12625-1 Soft tissue and products - Part 1: General guide to terms (ISO 12625-1: 2011)
TS EN ISO 12625-1 Soft tissue and products - Part 1: General guide to terms "
TS EN 61988-1 Plasma displays - Part 1: Terminology and letter symbols
TS EN 13232-2 + A1 Railway applications-Railway-Shears and intersecting railways-Part 2: Rules for geometric design
TS EN 13232-3 + A1 Railway applications-Railway-Shears and intersecting railways-Part 3: Rules for wheel / rail interaction
TS EN 13232-4 + A1 Railway applications - Road joining (truss) and crossings - Part 4: Movement, locking and searching
TS EN 13232-5 + A1 Railway applications - Road - Junction (truss) and crossings - Part 5: Junctions (truss)
TS EN 13232-6 + A1 Railway applications - Road - joining (truss) and crossings - Part 6: Fixed, joint and blind (closed) crossings
TS EN 13232-7 + A1 Railway applications - Rail - Tongues and hubs of shears - Part 7: Moving part hubs
TS EN 13232-9 + A1 Railway applications - Railway - Tongues and hubs of shears - Part 9: Installations
TS ISO 6518-1 Road vehicles - Ignition systems - Part 1: Terminology
TSE ISO / IEC Guide 99 International metrology glossary - Basic and general concepts and related terms (vim)
tst ISO 7637-1 Road vehicles - Electrical disturbances due to transmission and coupling - Part 1: Definitions and general considerations
TS EN 1540 Workplace exposure - Terms and definitions
TS ISO 5127 Information and Documentation - Glossary
TS ISO 1925 Mechanical vibration - Balancing - Terms and definitions
TS EN 60819-1 Papers-for non-cellulosic-electrical purposes-Part 1: Definitions and general rules
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
Non-destructive testing - Terms - Part 1330: Terms used in acoustic emission inspection
TS EN ISO 12706 Nondestructive testing - Penetrant inspection - Terms and recipes
TS EN 1096-1 Glass- Used in buildings- Coated glass- Part 1: Definitions and classification
TS EN ISO 4007 Personal protective equipment - Eye and face protection - Glossary
TS EN ISO 772 Hydrometric determinations - Terms, definitions and symbols
TS EN ISO 26909 Springs - Terms and definitions
TS EN 13306 Care - Terms and recipes
TS EN 303-5 Boilers - Part 5: Solid fuel boilers, manual and automatic loading, rated heat output up to 500 kW - Terms and definitions, requirements, tests and marking
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TS EN 14909 Flexible sheets for waterproofing - Plastic and rubber waterproofing sheets - Definitions and features
TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and features
TS EN 15898 Protection of cultural property - General main terms and definitions
ISO EN / IEC 19762-3: 2012 Information technology-Automatic identification and data acquisition (AIDC) techniques-Harmonized dictionary-Part 3: Radio frequency identification (RFID)
TS EN ISO 6165 Construction and excavation machinery - Basic types - Definition, terms and descriptions
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS EN 1330-4 Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing
tst EN 14588 Solid biofuels - Terms, descriptions and explanations
Information technology - Automatic identification and data retrieval (AIDC) techniques - Harmonized dictionary - Part 19762: General terms related to AIDC TS EN ISO / IEC 1-1
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
TS ISO 6531 Forestry machines - Portable chain saws - Terms and descriptions
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS EN 14588 Solid biofuels - Terms, descriptions and descriptions
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS ISO 2041 Mechanical vibration mechanical impact and condition monitoring - Terms and definitions
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 13956 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and features
TS EN 303-5 Boilers-Section 5: Solid fuel boilers with manual and automatic loading, rated heat power up to 500 kw-Terms and recipes, specifications, tests and marking
TS ISO 1791 Building construction - Modular compatibility - Terms
TS EN 60695-4 Fire hazard test - Part 4: Terminology for fire tests for electrotechnical products (IEC 60695-4: 2012)
tst EN ISO 10209 Technical product documentation - Vocabulary - technical drawings, product description and requirements for related documents
TS EN 16256-1 Pyrotechnic materials - Pyrotechnic materials for illustrations - Section 1: Terms and definitions
TS 6956 EN ISO 4287 / A1 Properties of geometric products (gmö) - Surface structure: Profile method - Terms, descriptions and parameters of surface structure
TS EN 14618 Agglomerate stones - Terms and classification
TS EN ISO 14451-1Pyrotechnic materials - Pyrotechnic materials for vehicles - Part 1: Terminology
Pyrotechnic materials - Pyrotechnic materials for illustrative purposes - Part 16256: Terminology
TS EN ISO 445 Pallets for loading and unloading materials - Glossary
TS EN ISO 10209 Technical product documentation - Vocabulary - technical drawings, product description and related documentation requirements
TS EN 60695-4 Fire hazard test - Part 4: Terms and definitions of fire tests for electrotechnical products
TS EN ISO 18542-1 Road vehicles - Standard repair and maintenance information (RMI) Terminology - Part 1: General information and use case description
TS EN ISO 17769-1 Liquid pumps and installations - General terms, definitions, sizes, letter symbols and units - Part 1: Liquid pumps
TS EN ISO 17769-2 Liquid pumps and installations - General terms, definitions, sizes, letter symbols and units - Part 1: Pump systems
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 12665: 2011 Light and lighting-Basic definitions and criteria for lighting rules
TS EN ISO 445 Pallets - For loading and unloading materials - Terms and definitions
TS EN 13984 Flexible sheets - For waterproofing - Plastic and rubber sheets for water vapor control - Definitions and features
TS EN 16311 Engineering services - Definition of engineering services for industrial products
TS EN ISO 5526 Cereals, legumes and other grained foods - Nomenclature
TS EN ISO 5526 Cereals, legumes and other granular foods - Nomenclature
TS EN 16310 Engineering services - Terminology for buildings, infrastructure and industrial services
tst EN ISO 13666 Ophthalmic optics - Glasses lenses - Terms (ISO 13666: 2012)
TS EN ISO 11979-1 Eye implants - Intraocular lenses - Part 1: Terms and descriptions (ISO 11979-1: 2012)
TS ISO 7132 Earthmoving machinery - Tipper - Terminology and commercial properties
TS ISO 15644 Road construction and maintenance equipment - Chippings spreader - Terminology and commercial properties
TS EN ISO 7369 Pipe systems - Metal hoses and hose assemblies - Terms
TS EN ISO 2076 Textile - Artificial fibers - Group names (ISO 2076: 2013)
tst EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms
TS ISO 7132 Earthmoving machines - Dumpers - Terms and Commercial Properties
TS EN 13701: 2001 Space systems - Terms and definitions
TS EN 16016-1 Non-destructive testing - Radiation methods - Computed tomography - Part 1: terms
TS ISO 20252: 2012 Market, opinion polls and social research-Terminology and terms of service
TS ISO 20252 Market, public opinion and social research - Terminology and terms of service
TS ISO 4223-1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
TS EN 60469 Transient regimes, pulses and related waveforms - Terms, descriptions and algorithms
TS EN 15213-1 Intelligent transportation systems - after-theft systems for stolen vehicle recovery - Part 1: Reference architecture and terminology
TS ISO 12749-2 Nuclear energy, nuclear technologies, and radiological protection - Word - Part 2: Radiological Protection
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN 1837 + A1 Safety in machinery - Lighting systems integrated in machinery
TS EN ISO 1942 Dentistry - Terms
TS ISO 4223-1 / AMD1Descriptions of some terms used in the tire industry - Part 1: Modified pneumatic tires 1
TS EN 15357 Solid fuels recovery - Terminology, definitions and descriptions
TS EN ISO 2076 Textile - Artificial fibers - Group names
TS 1118-3 EN ISO 90-3 Thin metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans
TS EN 10049 Measurement of average roughness Ra and peak number RPc on metal flat products
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications
TS EN ISO 12543-1 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 1: Description and description of components
TS ISO 5408 Thread - Terms and recipes
TS ISO 5742 Pliers and nippers - Designation
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN ISO 6927 Structures and civil engineering works - Joint sealing materials - Glossary
TSE ISO / TS 11139 Sterilization of health care products - Terms and definitions
TS EN 1325 Value management - Glossary - Terms and recipes
TS EN ISO 472 Plastics-Terms and recipes
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms
TS EN 15144 Winter Care Equipment - Terms and Definitions - Terms for partial care
TS EN ISO 9235 Aromatic natural raw materials
TS EN ISO 4007 Personal protective equipment - Eye and face protection - Glossary
TS EN 16214-1 Sustainability criteria for biofuels and biolic products for energy applications - Principles, criteria, indicators and validators - Part 1: Terminology
TS EN 607 Rain gutters and fittings-Made of PVC-U-Recipes-Features and tests
TS ISO 4223-1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
TS ISO 4223-1 / AMD1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
tst EN ISO 16559 Solid biofuels - Terms, descriptions, and explanations
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS EN 16323 Glossary of wastewater engineering terms
TS EN ISO 18542-2 Road vehicles - Standard repair and maintenance information (RMI) terms - Part 2: Standard processing application requirements, registration authority (ISO 18542-2: 2014)
TS EN 16436-1 Rubber and plastic hoses, tubes and fittings for use with propane, butane and mixtures thereof in the vapor phase - Part 1: Hoses and tubes
TS EN 415-1 Packaging machines - Safety - Part 1: Packaging machines and related equipment - Terms and classification
TS EN ISO 17677-1 Resistance welding - Terms - Section 1: Spot, projection and seam welding
TS EN 14190 Gypsum board products - Recycled material - Definitions, requirements and test methods
TS EN 16575 Products of biological origin - Terms and definitions
TS EN 16575 Products of biological origin - Terms and definitions
TS EN 16323 Glossary of wastewater engineering terms
TS EN ISO 8330Plastic and plastic hoses and hose assemblies - Terms and definitions
TS EN ISO 22300 Social security - Terminology
TS ISO 611Road Vehicles-Brake Systems of Motor Vehicles and Their Trailers-Definitions
TS EN ISO 18542-2 Road vehicles - Standard repair and maintenance information (RMI) terms - Part 2: Standard processing application requirements, registration authority (ISO 18542-2: 2014)
TSE ISO / TS 11139 Sterilization of sanitary materials - Terms and definitions
TS EN ISO 3493 Vanilla-Dictionary
TS EN ISO 9235 / AC Aromatic natural raw materials
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS ISO 1791 Building construction - Modular coordination - Terms
TS EN ISO 5492 Sensory analysis - Terms and definitions
TS EN 1846-1 Fire-fighting and rescue service vehicles - Part 1: Description and briefing
TS ISO 3918 Milking machine plants - Terms
TS ISO 6726 Mopeds and two-wheel motorcycles - Masses - Terms
TS EN ISO 3493 Vanilla-Dictionary
TS EN 14116 + A1 Tanks for the transport of dangerous goods - Digital interface for product recognition device for liquid fuels
TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Definitions of words and coatings (ISO 1891-2: 2014)
TS EN ISO 4618 Paints and varnishes - Terms and recipes
TS ISO 6107-7 Water quality - Terms - Section 7
TS ISO 6621-1 Internal combustion engines - Piston rings - Part 1: Terms and definitions
TS EN ISO 4063 Welding and welding processes - Nomenclature of operations and reference numbers
TS ISO 6621-1 Internal combustion engines - Piston rings - Part 1: Terms and definitions
tst 7260 Terms and descriptions of color and other appearance properties of matter
TS EN 13119 Curtain walls - Terms and recipes
TS ISO 4378-4 Plain bearings - Terms, descriptions and classification - Part 4: Calculation parameters and symbols
TS ISO 1122-1 / COR 2The glossary of gear terms section: Definitions of 1 geometry
TS ISO 3534-3 Statistics- Terms, descriptions and symbols - Part 3: Design of experiments
TS EN 1304 Roof tiles and fittings - Made of clay - recipes and features
TS EN ISO 18542-1 Road vehicles - Standard repair and maintenance information (RMI) Terminology - Part 1: General information and use case description
TS ISO 5742 Pliers and nippers - Designation
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN ISO 6927 Structures and civil engineering works - Joint sealing materials - Glossary
TSE ISO / TS 11139 Sterilization of health care products - Terms and definitions
TS ISO 8855 Road vehicles - Vehicle dynamics and road holding ability - Terms and definitions
TS ISO 6107-1 Water quality - Terms and definitions - Part 1
TS ISO 6107-2 Water quality - Terms and definitions - Part 2
TS ISO 6107-2 / Amd 1: 2012 Water quality- Terms and recipes- Part 2
TS ISO 6107-5 Water quality-Terms and recipes-Part 5
TS ISO 6107-6 Water quality-Terms and recipes-Part 6
TS ISO 2710-1 Reciprocating internal combustion engines - Terms and definitions - 1. Chapter: Terms and definitions for engine design and operation
TS ISO 2710-2 Reciprocating internal combustion engines - Terms and definitions - 2. Chapter: Terms and definitions for engine maintenance
TS ISO / IEC 27000 Information technology - Security techniques - Information security management systems - Overview and glossary
TS ISO / IEC 2382 Information technology - Terms and definitions
TS ISO 10263-1 Construction and excavation machinery -Environmental conditions within the operator's compartment-Section 1 general and recipes
TS ISO 6472 Rubber compound additives - Abbreviations
TS ISO 8062-1: 2007 Castings- Dimensional tolerances and machining allowance systems
TS ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes
TS EN ISO 15225 Medical devices - Quality management - Medical device naming data structure
TS EN ISO 15225 Medical devices - Quality management - Medical device naming data structure
TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage
TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage
TS EN ISO 374-1 Protective gloves against dangerous chemicals and microorganisms - Part 1: Terms and performance rules for chemical risks
TS EN ISO 374-5 Protective gloves against hazardous chemicals and microorganisms - Part 5: Terms and performance rules for microorganism risks
TS EN 378-1 Cooling systems and heat pumps - Safety and environmental regulations - chapter 1: Basic rules, recipes, classification and selection criteria
TS ISO 12749-2 Nuclear energy, nuclear technologies, and radiological protection - Word - Part 2: Radiological Protection
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS ISO 3918 Milking machine plants - Terms
TS ISO 6726 Mopeds and two-wheel motorcycles - Masses - Terms
TS EN ISO 3493 Vanilla-Dictionary
TS EN 14116 + A1 Tanks for the transport of dangerous goods - Digital interface for product recognition device for liquid fuels
TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Definitions of words and coatings (ISO 1891-2: 2014)
TS EN 303-1 / A1 Boilers - Part 1: Boilers with forced draft burners - Terms and definitions, general requirements, tests and marking
TS ISO / TS 13811 Tourism and related services - Rules for developing environmental conditions for accommodation facilities
TS EN 60641-1 Specifications of cardboard and pressed paper for electrical purposes - Part 1: Definitions and general rules
TS EN 764-1 + A1 Pressurized equipment - Part 1: Terms and definitions - Pressure, temperature, volume and nominal dimensions
TS EN ISO 14880-1 Optics and photonics - Microlens array - Part 1: Terms, descriptions and general features
TS 1880 EN 13188 / D1 Vinegar-Product of agricultural origin-recipes, specifications, marking
TS EN 16714-3 Non-destructive testing-Thermographic test-Section 3: Terms and definitions
TS EN 80000-6 Quantities and units - Part 6: Electromagnetism
TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 1325 Value management - Glossary - Terms and recipes
TS ISO 3918 Milking machine plants - Terms
TS ISO 55000 Asset management - Overview, principles and terminology
tst ISO 55002 Asset management - Management systems - Guidelines for implementing ISO 55001
TS ISO 4306-2 Cranes-Terms-Section 2: Overhead cranes
tst ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes
TS ISO 24294 Wood- Roundwood and timber- Terms and recipes
TS EN ISO 10286 Tubes for gases - Terms and definitions
TS EN ISO 9000 Quality management systems - Basic principles, terms and definitions
TS EN ISO 14451-1 Pyrotechnic substances - Pyrotechnic substances for vehicles - Part 1: Terminology
tst EN 1304 Roof tiles and fittings - Made of clay - recipes and features
TS EN 607 Rain gutters and fittings-Made of PVC-U-Recipes-Features and tests
TS ISO 16818 Building environment design - Energy efficiency - Terminology
TS ISO 12749-2 Nuclear energy, nuclear technologies and radiation protection-Terms and definitions - Part 2: Radiation protection
TS EN ISO 15007-1 Road vehicles - Measurement of the visual capability of the driver according to transport information and control systems - Part 1: Definitions and parameters
TS EN 62656-3 Transfer with standardized product ontology registration and spreadsheets - Part 3: Interface for Common Information Model
TS EN 15987 Leather - Terminology - Key definitions for leather trade
TS EN 16687 Construction products - Evaluation of release of hazardous substances - Terminology
TS EN 572-1 + A1 Glass - Structures - Basic soda lime silicate glass products - Part 1: Recipes, general physical and mechanical properties
TS EN 923 Adhesives - Terms and recipes
TS EN ISO 17658 Welding - Oxygen flame, laser beam and plasma cutting defects - Terms
TS ISO / IEC 17788 Information technology - Cloud computing - Overview and glossary
TS EN 15947-1 Pyrotechnic materials- Fireworks-Category 1,2 and 3- Section 1: Terms and definitions
TS EN ISO 8044 Corrosion of metals and alloys - Basic terms and definitions
TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and descriptions (ISO 9288: 1989)
TS EN 80000-13 Sizes and units - Part 13: Information science and technologies (IEC 80000-13: 2008)
TS ISO 6811 Spherical plain bearings - Terms and descriptions
TS ISO 7570 Woodworking machine tools - Combined carpenter benches, (planing and planing) -Terminology, acceptance requirements and accuracy inspections
TS 3737 Poultry - Terms and recipes
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS EN 16601-00-01 Space systems - Glossary of terms
TS EN 131-1 Ladders - Part 1: Terms, descriptions, types, functional dimensions
tst EN 131-1 Ladders - Part 1: Terms, types, functional dimensions
TS EN ISO 2080 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Glossary
TS EN 15878 Steel static storage systems - Terms and definitions
TS EN 13965-2 Waste characterization - Terms - Chapter 2: Management terminology and descriptions
Non-destructive testing - Terms - Part 1330: Terms used in acoustic emission inspection
TS EN ISO 12706 Nondestructive testing - Penetrant inspection - Terms and recipes
TS EN 12665: 2011 Light and lighting-Basic definitions and criteria for lighting rules
TS EN ISO 445 Pallets - For loading and unloading materials - Terms and definitions
TS EN 13984 Flexible sheets - For waterproofing - Plastic and rubber sheets for water vapor control - Definitions and features
TS EN 16311 Engineering services - Definition of engineering services for industrial products
TS EN ISO 5526 Cereals, legumes and other grained foods - Nomenclature
TS ISO 4223-1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
TS ISO 4223-1 / AMD1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
tst EN ISO 16559 Solid biofuels - Terms, descriptions, and explanations
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 80000-6 Sizes and units - Part 6: Electromagnetism
TS EN ISO 18064 Thermoplastic elastomers - Terms and abbreviations
Non-Destructive Testing - Terms and Definitions - Section 1330: List of General Terms
TS ISO 4306-2 Cranes - Terms and definitions - Part 2: Overhead traveling cranes
TS ISO 3509 Coffee and coffee products - Terms and recipes
TS EN ISO 10318-1 Geotextiles - Terms and definitions: Part-1
TS EN 16263-1 Pyrotechnic materials - Other pyrotechnic materials - Part 1: Terminology
TS EN 15947-1 Pyrotechnic materials- Fireworks-Category 1,2 and 3- Section 1: Terms and definitions
TS EN 14037-1 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºC - Part 1: Ceiling mounted radiant panels ready for ambient heating - Technical specifications and requirements
TS ISO 7132 Earthmoving machinery - Tipper - Terminology and commercial properties
TS ISO 15644 Road construction and maintenance equipment - Chippings spreader - Terminology and commercial properties
TS EN ISO 7369 Pipe systems - Metal hoses and hose assemblies - Terms
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS EN 16323 Glossary of wastewater engineering terms
TS EN ISO 18542-2 Road vehicles - Standard repair and maintenance information (RMI) terms - Part 2: Standard processing application requirements, registration authority (ISO 18542-2: 2014)
TS EN 16436-1 Rubber and plastic hoses, tubes and fittings for use with propane, butane and mixtures thereof in the vapor phase - Part 1: Hoses and tubes
TS EN 415-1 Packaging machines - Safety - Part 1: Packaging machines and related equipment - Terms and classification
TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and features
TS EN 13707 + A2 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications
TS ISO 11375 Construction machinery and equipment - Terms and definitions
tst EN ISO 4618 Paints and varnishes - Terms and recipes
TS EN ISO 11145 Optical and photonics - Lasers and laser-related equipment - Terms and symbols
TS EN ISO 14917 Thermal spraying - Terms, classification
TS EN ISO 14532 Natural gas-Dictionary
TS EN ISO 19496-1 Glass and porcelain enamels - Terminology - Part 1: Terms and definitions
TS EN ISO 12780-2 Properties of geometric products (gmö) -Requality-Section 2: Special operations
TSE ISO / TS 11139 Sterilization of sanitary materials - Terms and definitions
TS EN ISO 3493 Vanilla-Dictionary
TS EN ISO 9235 / AC Aromatic natural raw materials
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS ISO 1791 Building construction - Modular coordination - Terms
TS EN ISO 5492 Sensory analysis - Terms and definitions
TS EN 1846-1 Fire-fighting and rescue service vehicles - Part 1: Description and briefing
TS EN ISO 5527 Cereals - Terms and recipes
tst EN ISO 5527 Cereals- Terms and recipes
TS EN ISO 19496-2 Glass and porcelain enamels - Terminology - Part 2: Visual description and description
TSE ISO / IEC DIRECTIVES Part 2: 1999 Method for developing international standards
TSE ISO GUIDE 47: Submission of translations of 1999 Iso publications
TSE ISO Guide 73 Risk management - Terms and definitions
TS EN 303-1 / A1 Boilers boilers with forced draft burner - Part 1: Terms and definitions general features experiments and marking
TS EN 305 Heat exchangers - Performance descriptions and general test procedures for determining performance
TS EN 515 Aluminum and aluminum alloys - Temper brief representation of formable products
TS EN 520 + A1 Gypsum boards - Definitions, requirements and test methods
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS ISO 3534-2 Statistics -Terms and symbols-Section 2: Applied statistics
TS ISO 3534-1 Statistics - Terms, definitions and symbols - chapter 1: Probability and general statistical terms
TS EN 657 Thermal spraying - Terms, classification
TS 734 Definitions of classification and dimensioning of building and space elements
TS EN 736-1 Valves-Terminology section: Descriptions of 1 valve types
TS EN 736-2 Valves terminology section 2: Description of valve components
TS EN 736-3 Valves - Terminology - Part 3: Terms and definitions
TS EN ISO 772 Hydrometric determinations - Terms, definitions and symbols
TS EN 844-3 Round and sawn wood (lumber) - Terms - Part 3: General terms for sawn wood (lumber)
TS EN 844-5 Round and sawn wood (timber) - Terms-Part 5: Terms related to the dimensions of round wood
TS EN 844-6 Round and sawn wood (lumber) - Terms - Part 6: Terms related to timber dimensions
TS EN 844-7 Round and sawn wood (lumber) - Terms - Section 7: Terms related to the anatomical structure of wood
TS EN 844-8 Round and sawn wood (lumber) - Terms - Part 8: Terms relating to the characteristics of round wood
TS EN 844-9 Round and sawn wood - Terms - Part 9: Terms relating to the properties of sawn wood
TS EN 844-10 Round and sawn wood (lumber) - Terms - Part 10: Terms relating to coloring and fungal damage
TS EN 844-11 Round and sawn wood (lumber) - Terms - Part 11: Terms related to insect damage
TS EN 844-3 / T1 Round and sawn wood (lumber) - Terms - Part 3: General terms related to sawn wood (lumber) amended 1
TS EN 844-12 Round and sawn wood (timber) -Terminology-Part 12: Additional terms and general index
TS ISO 857-2 Welding and similar processes - Terms - part 2: Soldering and brazing and related terms
TS EN 932-6 Tests for general properties of aggregates - Part 6: Recipes for repeatability and adaptability
TS EN 1001-2 Durability of wood and wood-based products - Terminology - Part 2: Glossary of terms
TS EN 1083-1 Power-driven brushes - Part 1: Definitions and nomenclature
TS ISO 1112 Watch science - Functional and non-functional jewelery
TS ISO 1122-1 Glossary of glossary terms: 1 geometry recipes
TS ISO 1122-2 Glossary of gear terms - chapter 2: Definitions of worm gear geometry
TS ISO 1132-1 Roller bearings - Tolerances - Part 1: Terms and definitions
TS EN ISO 11807-2 Integrated optics - Terms and definitions - Part 2: Terms used in classification
TS 1198-1 ISO 1087-1 Terminology study-Terms and definitions section 1: Theory and practice
TS 1198-2 ISO 1087-2 Terminology study-Terms and recipes section 2: Computer applications
TS EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-1 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 1: Recipes
TS EN 1504-10 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1504-3 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS 1729 EN ISO 2064Metal and other organic coatings - Definitions and rules for thickness measurement
TS EN 1792 Welding - Terms for welding and related operations and their equivalents in various languages
TS EN ISO 11807-1 Integrated optics - Terms and definitions - chapter 1: Basic terms and symbols
TS 1880 EN 13188 Vinegar-Product of agricultural origin-recipes, specifications, marking
TS 1880 EN 13188 / T1 Vinegar-Product of agricultural origin-recipes, specifications, marking modification
TS EN 1885 Textile-Feather-Terms and recipes
TS EN 1885 / A1 Textile-Feather-Terms and recipes
TS 1891 Wooden packagings (terms, recipes and measurement methods)
TS EN 1900 Food contact materials - Non-metallic tableware - Terms and recipes
TS EN 1907 Safety rules for rope installations designed for the carriage of people - Terms and definitions
TS ISO 1998-99 Petroleum industry - Terms and recipes - part 99: General and index
TS ISO 1998-1 Petroleum industry - Terms and definitions - Section 1: Raw materials and products
TS ISO 1998-2 Petroleum industry - Terms and recipes - Part 2: Features and experiments
TS ISO 1998-3 Petroleum industry - Terms and recipes - Part 3: Exploration and production
TS ISO 1998-4 Oil industry - Terms and recipes - Part 4: Distillation
TS ISO 1998-5 Oil industry - Terms and recipes -Part 5: Transport, storage, distribution
TS 2128 EN 313-2 Plywood - Classification and terms - Part 2: Terms
TS ISO 2382-22 Information technology - Terms and recipes - Part 22: Calculators
TS ISO 2395 Test screens and sieve analysis - Terms and recipes
TS ISO 3529-2 Vacuum technology - Terms and definitions - Part 2: Vacuum pumps and related terms
TS ISO 3529-3 Vacuum technology - Terms and definitions - Part 3: Vacuum manometers
TS ISO 3529-1 Vacuum technology - Terms and definitions - Part 1: General terms
TS ISO 3536 Road vehicles-Safety glassware-Terms and recipes
TS EN 3781 Aviation series - Guide grooves for spiral wound retaining rings - Design standard
TS ISO 3828 Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols
TS ISO 3877-1 Tires, valves and inner tubes - List of terms section 1: Tires
TS ISO 4125 Dried fruits and dried fruits - Recipes and naming
TS ISO 4223-2 Description of some terms used in the tire industry - Part 2: Solid tires
TS ISO 4306-5 Cranes - Terms - Part 5: Bridge and gantry cranes
TS ISO 4306-3 Cranes - Terms - Section 3: Tower cranes
TS ISO 4306-1 Cranes - Terms - Part 1: General
TS EN 4591 Building lime - Part 1: Definitions, specifications and conformity criteria
TS ISO 5053 Motorized industrial vehicles - Terms
TS 5172 EN ISO 13402 Surgical and dental instruments - Determination of resistance to autoclaving, corrosion and heat
TS 5416 ISO 4880 Combustion properties of textile materials and products-Terms and definitions
TS ISO 5419 Drills-Helical-Terms, descriptions and types
TS ISO 5593 Roller bearings - Terms
TS EN 25967 Guides and threading - Symbols / descriptions and terminology of the main types
TS ISO 5805 Mechanical vibration and shock - Human exposure - Terms and definitions
TS ISO 6078 Black tea-Terms and recipes
TS ISO 6107-9 Water quality-Terms and recipes-Section 9: Alphabetical list and topic index
TS ISO 6286 Molecular absorption spectrometry- Terms and recipes- General- Apparatus and materials
TS 6354 EN ISO 1107 Fishing nets - Networking - Basic terms and definitions
TS ISO 6426-1 Terms related to horology - Part 1: Technical and scientific descriptions
TS ISO 6426-1 Terms related to horology - Part 1: Technical and scientific descriptions
TS ISO 6426-2 Terms relating to horology - Part 2: Technical and commercial descriptions
TS ISO 6289 Skiing - Terms
TS 6874 EN ISO 9251 Thermal insulation - Heat transfer conditions and material properties - Terms and definitions
TS ISO 6955 Analytical spectroscopy methods- Flame emission, atomic absorption and atomic fluorescence spectrophotometry- Terms and definitions
TSE ISO / TR 7003 Composite format for short representation of metals
TS ISO 7009 Woodworking machines - Single spindle milling machine - Naming and acceptance requirements
TS ISO 7112 Forest machines-Portable, hand-held shrub cutters and lawn pruners-Terms and recipes
TS ISO 7152 Camping tents and caravan awnings - List of terms and equivalent terms
TS EN ISO 7345 Thermal insulation - Physical quantities and recipes
TS ISO 7571 Woodworking machines - Planing machine with one side knife spindle - Naming and acceptance requirements
TS 7616 ISO 8116-1 Textile machinery and accessories-Leventler-Section 1: General terms and descriptions
TS 7691 ISO 1505 Textile machines-Widths for dyeing and finishing machines-Definitions and range of nominal widths
TS 7860 ISO 4378-1 Plain bearings - Terms, recipes and classification section 1: Design, bearing materials and properties of materials
TS ISO 7967-7 Internal combustion engines - Moving and moving - Terms for parts and systems - Part 7: Control systems
TS EN ISO 7998 Optics - Eye - Eyeglass frames - Equivalent term lists and recipes
TS EN ISO 8062-1 Geometrical properties of products (gps) - Dimension and shape tolerances of molded parts - Part 1: Glossary
TS EN ISO 8062-3 Geometrical properties of products (gps) - Dimension and shape tolerances of molded parts - Part 3: General dimensional and geometric tolerances and machining allowances for castings
TS EN ISO 8130-14 Coating powders - Part 14: Terms and definitions
TS ISO 8147 Shipbuilding and ship structures - Sewing cranes and group of parts - Terms
TS ISO 2444 Joints - Generated in buildings - Terms and recipes
TS ISO 8421-4 Fire protection-Terms and definitions-Section 4: Fire extinguisher
TS ISO 8499 Textile - Knitted fabrics - Error recipes - Terms
TS ISO 8548-1 Prostheses and orthoses - Limb deficiency - Part 1: A method of defining congenital limb deficiency
TS ISO 8548-2 Prostheses and orthoses - Limb deficiency - Part 2: Method for identifying lower limb amputation stumps
TS ISO 8548-3 Prostheses and orthoses - Limb deficiency - Part 3: Method for identifying upper limb amputation stumps
TS ISO 8549-1 Prostheses and orthoses - Terms and definitions - Part 1: General terms for limb orthoses and prostheses applied to the body
TS ISO 8549-2 Prostheses and orthoses - Terms and definitions - Part 2: Terms of application of prostheses and external limb prostheses
TS ISO 8549-3 Prostheses and orthoses - Terms and definitions - Part 3: Terms for external orthoses
TS IEC 60050-801 Terms and definitions used in electrotechnics - Part 801: Acoustic and electroacoustic
TS ISO 8604 Plastics-Pre-impregnated mixtures-Definitions of terms and symbols used in marking
TS ISO 8614 Ski fasteners- Terms and recipes
TS EN ISO 8655-1 Laboratory materials - Piston metered materials - part 1: Terms, general specifications and recommendations for use
TS EN ISO 8655-1 Laboratory materials - Piston metered materials - part 1: Terms, general specifications and recommendations for use
TS EN ISO 8655-1 / AC Laboratory materials - Piston metered materials - Part 1: Terms, general specifications and recommendations for use
TS EN ISO 8655-1 / AC Laboratory materials - Piston metered materials - Part 1: Terms, general specifications and recommendations for use
TS ISO 8669-1 Urine collection bags - Part 1: Terms
TS 10840 EN ISO 8785 Properties of geometric products (gmö) - Surface defects - Terms, descriptions and parameters
Non-Destructive Testing - Terms and Definitions - Section 8824: Terms and Definitions Used in Industrial Radiographic Examination
TS ISO 8927 Construction and excavation machines-Machine availability-Terms
TS ISO 8954-1 Ferroalloys - Terms and definitions - Part 1: Materials
TS ISO 8954-2 Ferroalloys- Terms and descriptions - Part 2: Sampling and sample preparation
TS ISO 8954-3 Ferroalloys-Terms and recipes-Part 3: Sieve analysis
TS EN ISO 9229 Thermal insulation - Terms and definitions
TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and recipes
TS ISO 9566 Woodworking machines - Multi-spindle mortising machines
TS 9876 EN 303-4 Boilers-Section 4: Boilers with forced draft burners-Heat power 70 kw and maximum operating pressure 3 bar (0,3 mpa) boilers with forced draft liquid fuel burners-Terminology, special conditions, tests and markings
TS EN 10020 Description and classification of steel types
TS EN ISO 10075-1 (Formerly: TS ISO 10075) Ergonomic rules for mental workload-General terms and definitions
TS EN 10079 Definitions of steel products
TS 10111 ISO 1837 Lifting hooks - designation
TS ISO 10132 Textile - Textured filament yarns - Recipes
TS 10146 EN 1556 Barcoding - Terminology
TS EN 10266 Steel pipes, fittings, structural hollow profiles - Symbols and descriptions for use in product standards
TS EN ISO 10360-1 / AC Geometrical product specifications (gmö) - Coordinate measuring machines (kmö) - Acceptance and re-validation tests for - Part 1: Terms and definitions
TS ISO 10825 Gear wheels - Wear and damage to gear teeth - Terms
TS 10848 EN ISO 10209-2 Technical product documentation - Terms and definitions - Part 2: Terms related to projection methods
TS ISO 10934-1 Optical and optical devices - Terms and definitions related to microscope - part 1: Light microscope "
TS EN ISO 10991 Micro process engineering - Glossary
TS EN ISO 11073-10101 Health informatics - External test medical device communication - Part 10101: Nomenclature
TS ISO 11086 Gas turbines - Terms and definitions
TS ISO 11994 Cranes - Usability - Terms and definitions
TS EN 12056-1 Attractive drainage systems - Indoor - part 1: General rules and performance rules
12180-1: Properties of geometric products (gmö) -Cylindrical-Section 2011: Glossary and parameters for roundness
TS EN ISO 12180-2: 2011 Geometrical product specifications (gmö) -Cylindrical-Part 2: Special operations
TS EN ISO 12181-2: 2011 Properties of geometric products (gmö) -Roundness-Section 2: Special operations
12181-1: Properties of geometric products (gmö) -Roundness-Section 2011: Glossary and parameters for roundness
TS EN 12216 Shutters, exterior and interior shutters - Terminology, symbols and recipes
TS EN 12258-2 Aluminum and aluminum alloys - Terms and definitions - Part 2: Chemical analysis
TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry
TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry
TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap
TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap
TS EN 12262 Rotodynamic pumps - Technical documents - Terms, delivery range and plan
TS EN 12325-3 Irrigation techniques - Circular and linear moving (central axis and laterally moving) systems - Part 3: Technical terms and classification
TS EN 12433-1 Doors - Industrial and commercial buildings and garages - Terms and descriptions - Part 1: Door types
TS EN 12440 Natural stones - Naming criteria
TS EN 12466 Elastic floor coverings - Glossary
TS EN 12484-2 Irrigation techniques - Automatic lawn irrigation systems - Part 2: Description and design of typical technical models
TS EN 12519 Windows and pedestrian doors - terms and descriptions
TS EN 12526 Wheels and swivel castors - Terms and definitions - Correspondence and recommended symbols in various languages
TS EN 12674-1 Cylindrical containers - Part 1: Terms
TS EN 12701 Structural adhesives-Storage-Terms and explanations related to shelf-life and storage conditions of structural adhesives and related materials
TSE ISO / TR 12735-1 Mechanical testing of metals - Symbols used in conjunction with descriptions - Part 1: Symbols and descriptions in published standards
TS EN 12775 Solid wood boards - Classification and terminology
TS EN ISO 12780-1: 2011 Properties of geometric products (gmö) -Linearity-Section 1: Glossary and parameters for linearity
12781-1: Properties of geometric products (gmö) -Planarity-Section 2011: Glossary and parameters for flatness
TS EN ISO 12781-2: 2011 Properties of geometric products (gmö) -Planarity-Section 2: Special operations
TS EN 12792 Ventilation for buildings - Symbols, terminology and graphic symbols
TS EN 12830 Temperature loggers for refrigerated, deep-frozen / quick-frozen food and ice-cream - Tests, performance, suitability
TS EN 12901 Inorganic support and filter media - Used for the treatment of drinking and potable water - Recipes
TS EN 12944-2 Fertilizers and calcifying agents - Terms and definitions - Part 2: Terms and definitions for fertilizers
TS EN 13193 Packaging - Packaging and environment - Terms and definitions
TS EN 13193 Packaging - Packaging and environment - Terms and definitions
TS EN 13248 Cooking appliances - Independent heating coffee machines for household use - Recipes, rules and test methods
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN ISO 13349 Fans - Terms and definitions of fan classes
TS EN 13360 Rubber or plastic coated fabrics - Terminology
TS EN 13447 Electrically powered road vehicles - Terms and definitions
TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics
TS EN 13551 Inland water navigation vessels - Terms and recipes
TS EN 13622 Gas welding equipment - Terminology - Terms used for gas welding equipment
TS EN 13635 Irrigation techniques-Position irrigation systems-Terminology and data provided by the manufacturer
TS ISO 13715 Technical drawing - Fuzzy edges - Terms, descriptions and representations
TS EN 13816 Transport-Logistics and services-Public transport; Definition, objective and measurement of service quality
TS EN 13857-1 Civil explosives - Part 1: Terms and definitions
TS ISO 13860 Forestry machines - Feeders - Terms, descriptions and commercial features
TS ISO 13861 Forestry machines - Roundwood loaders with wheels - Terms, descriptions and commercial features
TS ISO 13862 Forestry machines - Tipping tools - Terms, descriptions and commercial features
TS EN 13878 Temporary residence vehicles - Terms and definitions
TS EN 13888 Joint filler for tiles - Requirements, conformity assessment, classification and demonstration
TS EN 14175-1 Fume cupboards - Part 1: Terms and directions
TS EN 14182 Packaging - Terminology - Basic terms and definitions
TS EN 14232 High-end ceramics - Terms, descriptions and abbreviations
TS EN 14255-4 Measurement and evaluation of personal exposure to non-coherent optical radiation - Part 4: Terms and units used to measure exposure to ultraviolet (uv), visible and infrared (ir) radiation
TS EN 14478 Railway applications - Braking - Generic dictionary
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN ISO 14532 Natural gas - Glossary
TS EN ISO 14588 Blind rivets - Terms and recipes
TS EN ISO 14660-2 Geometrical product characteristics (gmö) - Geometry elements - Part 2: Covered midline of a cylindrical and cone covered surface, covered local area of a covered geometry element
TS EN ISO 14692-1 Glass fiber reinforced plastic (ctp) pipe systems - part used in the oil and gas industry 1: Terms, symbols, applications and materials
TS EN ISO 14692-1 Glass fiber reinforced plastic (ctp) pipe systems - part used in the oil and gas industry 1: Terms, symbols, applications and materials
TSE CEN / TR 14699 Office furniture - Terms and recipes
TS EN 14879-1 Organic coating systems and primers for the protection of industrial devices and plants against corrosion caused by aggressive media
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN ISO 15253 / AC Ophthalmic optics and instruments - Optical instruments for strengthening poor vision
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15529 Coal pyrolysis products - Terms and recipes
TS EN 15532 / tst AC Bikes - Terminology (german version)
TS EN 15663 Railway applications - Definitions of vehicle reference bodies
TS EN 15663 / AC Railway applications - Definitions of vehicle reference bodies
TS EN 15826 Glass and porcelain enamels - Terms and recipes
TS EN 15900 Energy efficiency services - Terms and rules
TS EN 15900 Energy efficiency services - Terms and rules
TS EN ISO 16348 Metallic and other inorganic coatings - Terms and conditions of appearance
TS EN ISO 17659 Welding - Examples of terms in several languages for welded joints (iso 17659: 2002)
TS ISO 17724 Graphic symbols - Terms and recipes
TS ISO 18115 Chemical analysis of surfaces-Glossary
TS EN ISO 18513 Tourism services - Hotels and other types of tourism accommodation - Terminology
TS EN ISO 19952 Footwear - Dictionary
TS EN ISO 21183-2 Lightweight conveyor belts - Part 2: List of equivalent terms
TS EN 24006 Flow measurement in closed pipes - Terms, descriptions and symbols
TS EN 50290-1-2 Communication cables - Part 1-2: Definitions
TS EN 60068-5-2 Environmental resistance test procedures - Part 5: Guidelines for the preparation of test methods - Terms and definitions
TS EN 60071-1 Insulation coordination - Part 1: Definitions, principles and rules
TS EN 60276 Definitions and terms related to carbon brushes, brush holders, collectors and rings for electrical machines
TS EN 60464-1 Varnishes - Part used for electrical insulation 1: Definitions and general characteristics
TS EN 60464-1 / A1 Varnishes for electrical insulation - Part 1: Definitions and general characteristics
TS EN 60534-1 Industrial operating valves - Part 1: Terms and general principles for control valves
TS EN 60555-1 Deterioration caused by the supply of electrical appliances used in domestic and similar areas - Part 1: Definitions
TS IEC 60557 IEC terms and descriptions in the field of nuclear reactors
TS EN 60641-1 Specifications of cardboard and pressed paper for electrical purposes - Part 1: Definitions and general rules
TS EN 60674-1 Plastic films for electrical purposes - Part 1: Definitions and general features
TS EN 60684-1 Flexible insulating sleeves - Part 1: Definitions and general rules
TS EN 61067-1 Strips - Woven from glass fibers and glass-polyester fibers - Part 1: Definitions, classification and general characteristics
TS EN 61068-1 Webbing tapes - Polyester fibers - Specification - Part 1: Definitions, designation and general characteristics
TS EN 61086-1 Specifications for coatings used in printed circuit boards - Part 1: Definitions, classification and general rules
TS EN 61086-1 Specifications for coatings used in printed circuit boards - Part 1: Definitions, classification and general rules
TS EN 61120-4 Two-reel digital tape recorder system using 6,3 mm magnetic tape for professional use - Part 4: Magnetic tape specifications - Definitions and measurement methods
TS EN 61360-4 Standard data element types with related classification scheme for electrical elements section 4: IEC standard data element types, components, classes and terms
TS EN 61508-4 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 4: Definitions and abbreviations
TS EN 61508-7 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 7: Examination of techniques and measures
TS EN 61512-1 Lot control - Part 1: Substances and terminology
TS EN 61925 Multimedia systems and devices - Multiple home server systems - Home server glossary
TS EN 62261-1 Television data - Part 1. data dictionary structure
TS EN 62261-1 Television data - Part 1. data dictionary structure
TS EN 62333-1 Noise suppression layer for digital devices and devices - Part 1: Terms and definitions
TS EN 62453-2 Field instrument instrument (fdt) interface specifications-Section 2: Concepts and detail specifications
Integrated digital network services (ISDN) - User to user signaling complementary service - Digital subscriber signaling system no 300286 protocol - Part 2: Protocol generation approval status draft specification
TS EN 300462-1-1 V 1.1.1 Transmission and multiplexing (tm) - Generic requirements for synchronization networks - Part 1-1: Definitions and terminology for synchronization networks
TS EN 13318 Screed materials and screed application - Recipes
Generalizations, Terminology, Standardization, Documentation Terms
TS ISO 12753-1 Compasses-Section 1: Naming, illustrations and equivalent terms
TS EN 45020 Standardization and related activities - General terms and descriptions
TS ISO 5127 Information and Documentation - Glossary
tst EN ISO 10209 Technical product documentation - Vocabulary - technical drawings, product description and requirements for related documents
TS EN ISO 10209 Technical product documentation - Vocabulary - technical drawings, product description and related documentation requirements
TS EN 14116 + A1 Tanks for the transport of dangerous goods - Digital interface for product recognition device for liquid fuels
TS EN 62656-1 Standard product ontology registration and transfer by spreadsheets - Part 1: Logical structure for data parcels
TS EN 62656-3 Transfer with standardized product ontology registration and spreadsheets - Part 3: Interface for Common Information Model
TS ISO 12756 / Amd.1 Writing and drawing tools - Ball pens and roller pens - Terms - Amendment 1: Viscosity of writing fluid
TSE ISO / IEC DIRECTIVES Part 2: 1999 Method for developing international standards
TSE ISO GUIDE 47: Submission of translations of 1999 Iso publications
TS 1198-1 ISO 1087-1 Terminology study-Terms and definitions section 1: Theory and practice
TS 1198-2 ISO 1087-2 Terminology study-Terms and recipes section 2: Computer applications
TS 9578 Documentation and information terms - Basic concepts
TS 9578 Documentation and information terms - Basic concepts
TS 9579 Documentation and information terms-General documents
TS 9579 Documentation and information terms-General documents
TS 9580 Documentation and information terms document languages
TS 9580 Documentation and information terms document languages
TS 10848 EN ISO 10209-2 Technical product documentation - Terms and definitions - Part 2: Terms related to projection methods
TS 12644 Professionals without qualifications - Recipes according to coding principles
TS 12645 Qualified agricultural, forestry, stockbreeding, hunting and aquaculture workers - Recipes on the basis of coding
TS 12646 Service and salespeople - Recipes according to coding principles
TS 12647 Office and customer service staff - Recipes according to coding principles
TS 12648 Plant and machine operators and installers -
TS 13007 Public buildings-Hardware requirements-Terms and recipes
TS ISO 13715 Technical drawing - Fuzzy edges - Terms, descriptions and representations
TS ISO 17724 Graphic symbols - Terms and recipes
Sociology, Services, Organization and Management of Organization, Administration, Transportation Terms
TS EN 13809 Tourism services - Travel agencies and tour operators - Terminology
TS EN ISO 18513 Tourism services - Hotels and other types of tourism accommodation - Terminology
TS EN 13809 Tourism services - Travel agencies and tour operators - Terminology
TS EN 13816 Transport - Logistics and services - Public transport - Definition, objective and measurement of service quality
TS EN 14943 Communication services - Logistics - Glossary
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 14943 Transport services - Logistics - Glossary
TS EN 15602 Private security service providers - Terminology
TS EN 15707 Print media research - Terms and rules of service
TS EN 13306 Care - Terms and recipes
TS EN 16311 Engineering services - Definition of engineering services for industrial products
TS EN 16310 Engineering services - Terminology for buildings, infrastructure and industrial services
TS ISO 20252: 2012 Market, opinion polls and social research-Terminology and terms of service
TS ISO 20252 Market, public opinion and social research - Terminology and terms of service
TS EN 1325 Value management - Glossary - Terms and recipes
TS EN 16575 Products of biological origin - Terms and definitions
TS EN ISO 22300 Social security - Terminology
TS EN 1325 Value management - Glossary - Terms and recipes
TS ISO 55000 Asset management - Overview, principles and terminology
tst ISO 55002 Asset management - Management systems - Guidelines for implementing ISO 55001
TS ISO 55000 Asset management - Overview, principles and terminology
TS ISO 3534-3 Statistics- Terms, descriptions and symbols - Part 3: Design of experiments
TS EN ISO 9000 Quality management systems - Basic principles, terms and definitions
TS ISO / TS 13811 Tourism and related services - Rules for developing environmental conditions for accommodation facilities
TSE ISO Guide 73 Risk management - Terms and definitions
TS ISO 3534-2 Statistics -Terms and symbols-Section 2: Applied statistics
TS ISO 3534-1 Statistics - Terms, definitions and symbols - chapter 1: Probability and general statistical terms
TS 13131 Glossary of terms used in management services
TS 13132 Glossary of terms used in operations research
TS EN 13816 Transport-Logistics and services-Public transport; Definition, objective and measurement of service quality
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15900 Energy efficiency services - Terms and rules
TS EN ISO 18513 Tourism services - Hotels and other types of tourism accommodation - Terminology
Mathematics, Natural Sciences
TS IEC 60050-101 International Electrotechnical Glossary - Part 101: Mathematics
TS IEC 60050-101 International Electrotechnical Glossary - Part 101: Mathematics
ISO / TS 80004-1 Nanotechnology - Terms - Part 1: Basic terms
ISO / TS 80004-3 Nanotechnology - Terms - Part 3: Carbon nano-objects
ISO / TS 80004-4 Nanotechnology - Terms - Part 4: Nanostructured materials
ISO / TS 80004-8 Nanotechnology - Terms - Part 8: Nano manufacturing process
TSE CEN ISO / TR 80004-6 Nanotechnology - Terms - Part 6: Nano-object characterization
Definitions related to TS 4573 Hydrobiology
TS 5962 Soil and rock mechanics-Terms and symbols-used in geology and mining
TS 6108 Terms used in engineering geology
TS IEC 60050-111 International electrotechnical terms and recipes - part 111: Physics and chemistry
TS EN 1659 Diagnostic systems used outside the body - Microbiology culture media terms and descriptions
Health Technology Terms
TS 6781 EN ISO 4135 Anesthesia and breathing equipment - Terms and recipes
tst EN ISO 1942 Dentistry - Terms (ISO 1942: 2009, Corrected version 2010-03-01)
Optics - Eye - Contact lenses - Part 18369: Recommendations for terms, classification system and labeling specifications TS EN ISO 1-1 / A1
tst EN ISO 13666 Ophthalmic optics - Glasses lenses - Terms (ISO 13666: 2012)
TS EN ISO 11979-1 Eye implants - Intraocular lenses - Part 1: Terms and descriptions (ISO 11979-1: 2012)
TS EN ISO 1942 Dentistry - Terms
TSE ISO / TS 11139 Sterilization of health care products - Terms and definitions
TSE ISO / TS 11139 Sterilization of sanitary materials - Terms and definitions
TS ISO 7176-26 Wheelchairs - Part 26: Glossary
TS EN ISO 15225 Medical devices - Quality management - Medical device naming data structure
TS 5170 Medicinal and bullying plants-Naming
TS 5172 EN ISO 13402 Surgical and dental instruments - Determination of resistance to autoclaving, corrosion and heat
Terms and recipes related to the branch of TS 6784
TS 6785 Gynecology (gynecology) related terms and definitions
TS EN ISO 7998 Optics - Eye - Eyeglass frames - Equivalent term lists and recipes
TS 8287 Hemostatic forceps - Terms and recipes
TS ISO 8548-1 Prostheses and orthoses - Limb deficiency - Part 1: A method of defining congenital limb deficiency
TS ISO 8548-2 Prostheses and orthoses - Limb deficiency - Part 2: Method for identifying lower limb amputation stumps
TS ISO 8548-3 Prostheses and orthoses - Limb deficiency - Part 3: Method for identifying upper limb amputation stumps
TS ISO 8549-1 Prostheses and orthoses - Terms and definitions - Part 1: General terms for limb orthoses and prostheses applied to the body
TS ISO 8549-2 Prostheses and orthoses - Terms and definitions - Part 2: Terms of application of prostheses and external limb prostheses
TS ISO 8549-3 Prostheses and orthoses - Terms and definitions - Part 3: Terms for external orthoses
TS ISO 8669-1 Urine collection bags - Part 1: Terms
TS IEC 60050-891 Terms and definitions used in electrotechnics - Part: 891-Electrobiology
TS EN ISO 15253 / AC Ophthalmic optics and instruments - Optical instruments for strengthening poor vision
Environmental and Health Protection, Safety Terms
TS 7394 Fire protection - Terms - Components for protection
TS 7395 Fire protection-Terms-Evacuation and escape routes
TS ISO 6107-8 Water quality - Terms - Section 8
TS EN 1868 Fall protection personnel - List of equivalent terms
TS EN 132 Respiratory protection devices - Terms, descriptions and pictograms
TS EN 134 Respiratory protection devices - Nomenclature of components
TS EN ISO 13731 Ergonomics-Thermal environment-Terms and symbols
TS 5423 ISO 6107-3 Water quality-Terms and recipes-Section 3
TS 5424 ISO 6107-4 Water quality-Terms-Section 4
TS EN 12258-3 Classification of aluminum and aluminum alloy scrap
TS EN 165 Eye protectors-Personal-Terms
TS EN 15602 Private security service providers - Terminology
TS EN ISO 14050 Environmental management - Terms and definitions
TS EN ISO 13943 Fire safety - Terms and definitions
TS EN 13965-2 Waste characterization - Terms - Chapter 2: Management terminology and descriptions
TS ISO 3911 Wheels and rims for pneumatic tires - Terms and descriptions, short designation and marking
TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances
TS EN ISO 26800 Ergonomics - General approach, principles and concepts
TS EN 1540 Workplace exposure - Terms and definitions
TS EN ISO 4007 Personal protective equipment - Eye and face protection - Glossary
TSE CEN ISO / TR 11610 Protective clothing-Glossary
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
TS EN 60695-4 Fire hazard test - Part 4: Terminology for fire tests for electrotechnical products (IEC 60695-4: 2012)
TS EN 60695-4 Fire hazard test - Part 4: Terms and definitions of fire tests for electrotechnical products
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS ISO 12749-2 Nuclear energy, nuclear technologies, and radiological protection - Word - Part 2: Radiological Protection
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN 15144 Winter Care Equipment - Terms and Definitions - Terms for partial care
TS EN ISO 4007 Personal protective equipment - Eye and face protection - Glossary
TS EN 16323 Glossary of wastewater engineering terms
TS EN 16575 Products of biological origin - Terms and definitions
TS EN 16323 Glossary of wastewater engineering terms
TS EN 1846-1 Fire-fighting and rescue service vehicles - Part 1: Description and briefing
TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances
TS ISO 12749-2 Nuclear energy, nuclear technologies and radiation protection-Terms and definitions - Part 2: Radiation protection
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN ISO 11074 Soil quality - Terms and definitions
TS ISO 6107-7 Water quality - Terms - Section 7
TS ISO 6107-1 Water quality - Terms and definitions - Part 1
TS ISO 6107-2 Water quality - Terms and definitions - Part 2
TS ISO 6107-2 / Amd 1: 2012 Water quality- Terms and recipes- Part 2
TS ISO 6107-5 Water quality-Terms and recipes-Part 5
TS ISO 6107-6 Water quality-Terms and recipes-Part 6
TS ISO 6107-8 / Amd 1 Water quality - Terms - Part 8 MODIFICATION
TS ISO 6107-8 / Amd 1 Water quality - Terms - Section 8 Amendment 1
TS EN ISO 374-1 Protective gloves against dangerous chemicals and microorganisms - Part 1: Terms and performance rules for chemical risks
TS EN ISO 374-5 Protective gloves against hazardous chemicals and microorganisms - Part 5: Terms and performance rules for microorganism risks
TS EN 135 Respiratory equipment - List of equivalent terms
TS 4254 ISO 4225 Air quality terms
TS 5431 Soil and water conservation - Terms and definitions
TS 5449 Drainage and soil reclamation terms and definitions
TS 5468 Soil-Formation and classification terms and definitions
TS ISO 5805 Mechanical vibration and shock - Human exposure - Terms and definitions
TS ISO 6107-9 Water quality-Terms and recipes-Section 9: Alphabetical list and topic index
TS 7012 Fire protection-Terms-Smoke control
TS 7486 Fire protection-Terms
TS 8218 Resources (terms) - Terms and classification
TS 8265 Thermal sources-Terms
TS ISO 8421-4 Fire protection-Terms and definitions-Section 4: Fire extinguisher
TS 9524 Fire protection - Explosion detection and suppression ways - Terms and definitions
TS 9817 Forest protection-Forest fires terms and recipes
TS 9892 Fire protection - Training of firefighters - Terms and definitions
TS 9986 Fire protection-Fire detection and alarm-Terms and recipes
TS EN ISO 10075-1 (Formerly: TS ISO 10075) Ergonomic rules for mental workload-General terms and definitions
TS 10087 Water wells-Terms
TS 10223 Fire protection - Fire fighting, rescue operations and transport of dangerous goods - Terms and definitions
TS 10636 Fire protection - Fire extinguishing systems - Sprinkler systems - Terms and definitions
TS 11000 Hazardous chemical substances - Terms and definitions related to radiation and chemical hazards
TS 11250 Wastes-Definitions of terms-Related to fuels obtained from waste
TS 11358 Forest soils-Terms and recipes
TS 11557 Receiving medium- Halogenated and halogen-free compounds-Terms
TS 11638 Wastes-Terms and classification
TS 11638 / T1 Wastes-Terms and classification
TS 11708 Wastes - Term and classification of solid wastes
TS 11708 / T1 Wastes - Term and classification of solid wastes
TS 11710 Wastes-Liquid wastes term and classification
TS 11710 / T1 Wastes-Liquid wastes term and classification
TS 11715 Wastes-Gas wastes: Term and classification
TS 11800 Receiving media-Lakes-Terms
TS 11801 Receiving media-Seas-Terms
TS 11802 Receiving media-Environmental damage and diseases in fish-Terms
TS 11898 Safety rules in health care institutions section 10- Collection and delivery of hazardous wastes to those concerned
TS 11991 Terms related to receiving sediment
TS 12002 / T1 Forest ecology-Terms, recipes
TS 12004 Soil quality - Soil erosion - Terms and definitions
TS 12081 Receiving media-Streams-Terms
TS 12130 Water quality-Groundwater-Terms
TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry
TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap
TS EN 13193 Packaging - Packaging and environment - Terms and definitions
TS IEC 60050-821 International Electrotechnical Glossary - Part 821: Signaling and Safety Devices for Railways
Metrology and Measurement, Physical Events Terms
TS 6956 EN ISO 4287 Properties of geometric products (gmö) - Surface structure: Profile method - Terms, descriptions and parameters of surface structure
TS 5588 EN 60051-1 Electrical measuring instruments and accessories - Direct acting analogue display - Part 1: Definitions and general features common to all sections
Laboratory materials - Injector - Part 8655: Terms, general specifications and instructions for use
tst IEC 60050-881 Terms and definitions used in electrotechnics - Radiology and radiological physics
TS EN ISO 12780-2 Properties of geometric products (gmö) -Requality-Section 2: Special operations
TSE ISO / IEC Guide 99 International metrology glossary - Basic and general concepts and related terms (vim)
TS EN ISO 772 Hydrometric determinations - Terms, definitions and symbols
TS ISO 2041 Mechanical vibration mechanical impact and condition monitoring - Terms and definitions
TS IEC 60050-131 International Electrotechnical Glossary - Part 131: Circuit Theory
TS 6956 EN ISO 4287 / A1 Properties of geometric products (gmö) - Surface structure: Profile method - Terms, descriptions and parameters of surface structure
TS EN 60469 Transient regimes, pulses and related waveforms - Terms, descriptions and algorithms
TS EN 10049 Measurement of average roughness Ra and peak number RPc on metal flat products
TS IEC 60050-131 International Electrotechnical Glossary - Part 131: Circuit Theory
TS IEC 60050-131: 2002 / A1 International Electrotechnical Glossary - Part 131: Circuit Theory
TS IEC 60050-131: 2002 / A2 International Electrotechnical Glossary - Part 131: Circuit Theory
TS IEC 60050-131 / A1 REPLACEMENT 1 International Electrotechnical Glossary - Part 131: Circuit Theory
TS IEC 60050-131 / A2 REPLACEMENT 2 International Electrotechnical Glossary - Part 131: Circuit Theory
TS ISO 8062-1: 2007 Castings- Dimensional tolerances and machining allowance systems
TS EN ISO 772 Hydrometric determinations - Terms, definitions and symbols
TS 929 Tools for measuring surface roughness by profile method-Terms
TS 1729 EN ISO 2064 Metallic and other organic coatings - Definitions and rules for thickness measurement
TS 2183-2 HD 483.2 S2 Sound system devices - part 2: Definitions and calculation methods of general terms
TS 2753 Measurement technique terms
TS 2843 Vibration and shock - Balancing - Terms and definitions
TS 3418 Measurement of fluid flow in pipes terms and symbols
TS 3845 Pulse terms and definitions
TS 4564 Terms and definitions used in electrotechnics- Scientific and industrial measuring instruments
TS 5798 Glossary of basic and general terms in metrology
TS 5822-1 ISO 5725-1 Accuracy of measurement methods and results (reality and precision) section 1: General principles and descriptions
TS 5822-3 ISO 5725-3 Accuracy of measuring methods and results (reality and accuracy) - Part 3: Intermediate measurements of the accuracy of a standard measuring method
TS 5882 Form deviations terms and classification system
TS 6031 Terms and definitions used in electrotechnics- Electronic measuring instruments
TS 6032 Terms and definitions used in electrotechnics-General terms related to electrical measurements
TS 6033 Terms and definitions used in electrotechnics-Electrical measuring instruments
TS ISO 6426-1 Terms related to horology - Part 1: Technical and scientific descriptions
TS 7032 Terms and definitions used in electrotechnics-Measuring transformers
TS EN ISO 8062-1 Geometrical properties of products (gps) - Dimension and shape tolerances of molded parts - Part 1: Glossary
TS EN ISO 8062-3 Geometrical properties of products (gps) - Dimension and shape tolerances of molded parts - Part 3: General dimensional and geometric tolerances and machining allowances for castings
TS IEC 60050-801 Terms and definitions used in electrotechnics - Part 801: Acoustic and electroacoustic
TS EN ISO 8655-1 Laboratory materials - Piston metered materials - part 1: Terms, general specifications and recommendations for use
TS EN ISO 8655-1 / AC Laboratory materials - Piston metered materials - Part 1: Terms, general specifications and recommendations for use
TS 10840 EN ISO 8785 Properties of geometric products (gmö) - Surface defects - Terms, descriptions and parameters
TS EN ISO 10360-1 / AC Geometrical product specifications (gmö) - Coordinate measuring machines (kmö) - Acceptance and re-validation tests for - Part 1: Terms and definitions
12180-1: Properties of geometric products (gmö) -Cylindrical-Section 2011: Glossary and parameters for roundness
TS EN ISO 12180-2: 2011 Geometrical product specifications (gmö) -Cylindrical-Part 2: Special operations
TS EN ISO 12181-2: 2011 Properties of geometric products (gmö) -Roundness-Section 2: Special operations
12181-1: Properties of geometric products (gmö) -Roundness-Section 2011: Glossary and parameters for roundness
TS EN ISO 12780-1: 2011 Properties of geometric products (gmö) -Linearity-Section 1: Glossary and parameters for linearity
12781-1: Properties of geometric products (gmö) -Planarity-Section 2011: Glossary and parameters for flatness
TS EN ISO 12781-2: 2011 Properties of geometric products (gmö) -Planarity-Section 2: Special operations
TS EN 12830 Temperature loggers for refrigerated, deep-frozen / quick-frozen food and ice-cream - Tests, performance, suitability
TS EN 14255-4 Measurement and evaluation of personal exposure to non-coherent optical radiation - Part 4: Terms and units used to measure exposure to ultraviolet (uv), visible and infrared (ir) radiation
TS EN ISO 14660-2 Geometrical product characteristics (gmö) - Geometry elements - Part 2: Covered midline of a cylindrical and cone covered surface, covered local area of a covered geometry element
TS EN 24006 Flow measurement in closed pipes - Terms, descriptions and symbols
TS IEC 60050-121 Terms and definitions used in electrotechnics - part 121: Electromagnetism
TS IEC 60050-393 International electrotechnical terms and descriptions section 393: Nuclear instrumentation: Physical phenomena and basic concepts
TS IEC 60050-394 International electrotechnical terms and definitions - Part 394: Nuclear instrumentation- Devices
Experiments Terms
Non-destructive testing-Terms and recipes-Section 1330: Non-destructive testing methods common terms
TS EN 1330-10 Non-destructive testing - Terminology - Section 10: Terms used in visual examination
TS EN 14096-1 Non-destructive testing - Characterization of digitalization systems for radiographic films - Part 1: Definitions, qualitative measurements of image quality parameters, standard reference film and quantitative control
TS EN 12519 Windows and doors for pedestrians - Terms and descriptions
TS EN 1330-8 Non-destructive testing-Terms-Part 8- Terms used for the tightness test
TS EN ISO 12718 Nondestructive testing - Eddy current inspection - Dictionary
TS ISO 2395 Inspection screens and screening examination-Terms
Non-destructive testing - Terms - Part 1330: Terms used in acoustic emission inspection
TS EN ISO 12706 Nondestructive testing - Penetrant inspection - Terms and recipes
TS EN 16016-1 Non-destructive testing - Radiation methods - Computed tomography - Part 1: terms
Non-Destructive Testing - Terms and Definitions - Section 1330: List of General Terms
Non-Destructive Testing - Terms and Definitions - Section 1330: List of General Terms
TS EN ISO 12707 Non-destructive testing - Terms used in magnetic particle inspection
TS EN 16714-3 Non-destructive testing-Thermographic test-Section 3: Terms and definitions
TS EN ISO 5577 Non-destructive testing - Ultrasonic Inspection
TS EN 1330-8 Non-destructive testing - Terms and definitions - chapter 8: Terms used in the sealing test
TS EN 1330-10 Non-destructive testing - Terminology - part 10: Terms used in visual inspection
TS ISO 2395 Test screens and sieve analysis - Terms and recipes
TS 3731 Conditioning atmosphere, test atmosphere, reference atmosphere-Definitions
Non-Destructive Testing - Terms and Definitions - Section 8824: Terms and Definitions Used in Industrial Radiographic Examination
TS 10090 Industrial sieves and sifting-Terms
TS EN 12519 Windows and pedestrian doors - terms and descriptions
TS EN 60068-5-2 Environmental resistance test procedures - Part 5: Guidelines for the preparation of test methods - Terms and definitions
General Purpose Mechanical Systems and Components
TS EN ISO 14588 Blind rivets - Terms and definitions
TS ISO 1122-2 Glossary of gear statements - Part 2: Definitions of worm gear geometry
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS ISO 1925 Mechanical vibration - Balancing - Terms and definitions
TS EN 60819-1 Papers-for non-cellulosic-electrical purposes-Part 1: Definitions and general rules
TS EN ISO 26909 Springs - Terms and definitions
TS 2377 Chains - For force and power transmission - Definitions and principles of classification
TS ISO 5408 Thread - Terms and recipes
TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Definitions of words and coatings (ISO 1891-2: 2014)
TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Terms and definitions for coatings
TS ISO 6811 Spherical plain bearings - Terms and descriptions
TS ISO 6811 Spherical plain bearings - Terms and descriptions
TS ISO 4378-4 Plain bearings - Terms, descriptions and classification - Part 4: Calculation parameters and symbols
TS ISO 1122-1 / COR 2 Glossary of glossary terms: 1 geometry recipes
TS ISO 1122-1 Glossary of glossary terms: 1 geometry recipes
TS ISO 1122-2 Glossary of gear terms - chapter 2: Definitions of worm gear geometry
TS ISO 1132-1 Roller bearings - Tolerances - Part 1: Terms and definitions
TS 5303 ISO 1081 Belt drive-V belts, notched pulleys and corresponding pulleys-Terms
TS ISO 5593 Roller bearings - Terms
TS 7860 ISO 4378-1 Plain bearings - Terms, recipes and classification section 1: Design, bearing materials and properties of materials
TS 7861 Plain bearings - Lubrication terms and definitions
TS 8201 Display system for fasteners
TS 9652 Lubrication devices-Terms and recipes (with grease)
TS ISO 10825 Gear wheels - Wear and damage to gear teeth - Terms
TS EN 12526 Wheels and swivel castors - Terms and definitions - Correspondence and recommended symbols in various languages
TS EN ISO 14588 Blind rivets - Terms and recipes
General Purpose Fluid Systems and Components
TS ISO 6552 Automatic steam traps-Definitions of technical terms
TS ISO 5598 Fluid power systems and components-Terms
TS EN ISO 14692-1 Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Terms, symbols, applications and materials
TS EN 764-3 Pressurized equipment - Part 3: Description of the parties concerned
TS EN 1333 Flanges and connections - Pipe fittings - Description and selection of Pn
TS EN 14799 Air filters for general air purification - Terms and definitions
tst EN ISO 8330 Rubber and plastic hoses and hose assemblies - Terms and definitions
TS EN 15714-1 Industrial valves - Actuators - Part 1: Terms and definitions
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TS EN ISO 17769-1 Liquid pumps and installations - General terms, definitions, sizes, letter symbols and units - Part 1: Liquid pumps
TS EN ISO 17769-2 Liquid pumps and installations - General terms, definitions, sizes, letter symbols and units - Part 1: Pump systems
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN ISO 7369 Pipe systems - Metal hoses and hose assemblies - Terms
TS EN 16436-1 Rubber and plastic hoses, tubes and fittings for use with propane, butane and mixtures thereof in the vapor phase - Part 1: Hoses and tubes
TS EN ISO 8330 Rubber and plastic hoses and hose assemblies - Terms and definitions
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS ISO 3529-3 Vacuum technology - Terms and definitions - Part 3: Vacuum manometers
TS EN ISO 10286 Tubes for gases - Terms and definitions
TSE CEN / TS 16769 Lpg equipment and accessories - Terms
TS 10765 / revision Plastic tubes-Terms and recipes
TS EN 764-1 + A1 Pressurized equipment - Part 1: Terms and definitions - Pressure, temperature, volume and nominal dimensions
TS EN 736-1 Valves-Terminology section: Descriptions of 1 valve types
TS EN 736-2 Valves terminology section 2: Description of valve components
TS EN 736-3 Valves - Terminology - Part 3: Terms and definitions
TS ISO 3529-2 Vacuum technology - Terms and definitions - Part 2: Vacuum pumps and related terms
TS ISO 3529-3 Vacuum technology - Terms and definitions - Part 3: Vacuum manometers
TS ISO 3529-1 Vacuum technology - Terms and definitions - Part 1: General terms
TS 9529 Compressors, pneumatic tools and machines - Terms - Part I - General
TS 9530 Compressors, pneumatic tools and machines - Terms section - Compressors
TS 10765 Plastic pipes - Terms and definitions
TS EN 12262 Rotodynamic pumps - Technical documents - Terms, delivery range and plan
TS 10765 Plastic pipes - Terms and definitions
TS EN 12262 Rotodynamic pumps - Technical documents - Terms, delivery range and plan
TS 10765 Plastic pipes - Terms and definitions
TS EN 12262 Rotodynamic pumps - Technical documents - Terms, delivery range and plan
Manufacturing Engineering Terms
TS 4782 Machine tools, metalworking - Terms, (Turkish, French, English,
TS 7052 Hard metal blowing molds - Terms
TS EN 25968 Threaders - Terms
TS ISO 8540 Presses - Mechanical - Open front - Terms
TS EN 13622 Gas welding equipment-Terminology-Terms used in gas welding
TS EN 61508-6 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 6: Guidelines for the application of IEC 61508-2 and IEC 61508-3
TS EN ISO 2080 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Glossary
TS EN ISO 4063 Welding and welding processes - Nomenclature of operations and reference numbers
TS EN ISO 25239-1 Friction mixing welding - Aluminum - Part 1: Glossary
TS ISO 5742 Pliers and nippers - Designation
TS EN ISO 17677-1 Resistance welding - Terms - Section 1: Spot, projection and seam welding
TS ISO 3408-1 Ball screws - Part 1: Terms, descriptions and brief description
TS EN ISO 17658 Welding - Oxygen flame, laser beam and plasma cutting defects - Terms
TS ISO 8373 Manipulating industrial robots - Terms
TS ISO 8373 Robots and robotic devices - Glossary
TS EN ISO 4063 Welding and welding processes - Nomenclature of operations and reference numbers
TSE CEN / TS 16981 Photocatalysis - Glossary of terms
TS EN ISO 14917 Thermal spraying - Terms, classification
TS EN ISO 19496-1 Glass and porcelain enamels - Terminology - Part 1: Terms and definitions
TS EN ISO 19496-2 Glass and porcelain enamels - Terminology - Part 2: Visual description and description
TS EN ISO 4885 Iron-based materials-Heat treatment - Dictionary
TS ISO 857-2 Welding and similar processes - Terms - part 2: Soldering and brazing and related terms
TS EN 1083-1 Power-driven brushes - Part 1: Definitions and nomenclature
TS EN 1792 Welding - Terms for welding and related operations and their equivalents in various languages
TS ISO 2806 Automation systems - for industry - Numerical control of machines - Terms and definitions
TS 2851 Identification and classification of machine tools
TS 3712 Cutting tools-Angles-General terms and reference systems
TS ISO 5419 Drills-Helical-Terms, descriptions and types
TS EN 25967 Guides and threading - Symbols / descriptions and terminology of the main types
TS 6262 Welding terms and recipes for heat cutting and gas welding
TS 6263 Welding terms and definitions-For safety and protection
TS 6471 Terms and definitions used in electrotechnics-Electric heating in industry
TS 6576 Welding terms and recipes-For experiments
TS 6851 Saws - Bands - for cutting metal - Terms and recipes
TS 7228 Thermal spray terms and definitions
TS ISO 1703 Assembly kits for screws and nuts - Short designation and terminology
TS 7680 Ferrules - Terms for punching molds - Terms
TS 8181 Press tools - Staples - Nomenclature and terms
TS 9529 Compressors, pneumatic tools and machines - Terms - Part I - General
TS 9530 Compressors, pneumatic tools and machines - Terms section - Compressors
TS 11245 Source terms and descriptions-General
TS EN 14879-1 Organic coating systems and primers for the protection of industrial devices and plants against corrosion caused by aggressive media
TS EN ISO 16348 Metallic and other inorganic coatings - Terms and conditions of appearance
TS EN ISO 17659 Welding - Examples of terms in several languages for welded joints (iso 17659: 2002)
IEC 60050-841 International Electrotechnical Glossary - Part 841: Industrial Electro
TS EN 61508-4 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 4: Definitions and abbreviations
TS EN 61508-7 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 7: Examination of techniques and measures
TS EN 61512-1 Lot control - Part 1: Substances and terminology
Energy and Heat Transfer Engineering Terms
TS EN 247 Heat exchangers - Terms and recipes
TS ISO 8107 Nuclear power plants-Sustainability-Terms and definitions
TSE IEC / TR 61364 Nomenclature for hydroelectric power plant machinery
TSE IEC / TR 61364 / Cor.1 Nomenclature for hydroelectric power plant machinery
TS ISO 7967-4 Internal combustion engines - Reciprocating movement - Terms and recipes section 4: Overfilling, air and exhaust gas system
TS ISO 7967-5 Internal combustion engines-Moving and commuting-Terms and descriptions section 5: Cooling systems
TS ISO 7967-8 Internal combustion engines - Moving and moving - Terms and descriptions section 8: Starting systems
TS ISO 7967-1 Internal combustion engines reciprocating moving-Terms for parts and systems section 1: Structure and exterior elements
TS ISO 7967-2 Internal combustion engines reciprocating moving-Terms and recipes section 2: Moving main parts
TS ISO 7967-3 Internal combustion engines - Reciprocating terms and descriptions section 3: Valves camshaft and actuating mechanisms
TS ISO 7967-6 Internal combustion engines - Moving and moving - Terms and descriptions section 6 - Lubrication systems
TS ISO 2710-1 Reciprocating internal combustion engines - Terms and definitions - 1. Chapter: Terms and definitions for engine design and operation
TS ISO 2710-2 Reciprocating internal combustion engines - Terms and definitions - 2. Chapter: Terms and definitions for engine maintenance
TS EN 378-1 Cooling systems and heat pumps - Safety and environmental regulations - chapter 1: Basic rules, recipes, classification and selection criteria
TS EN 16905-1 Gas-driven endothermic motor-driven heat pumps - Part 1: Terms and definitions
TS EN 267 / tst T1 Burners, forced draft, for liquid fuel - Recipes, specifications, tests and marking
TS EN 305 Heat exchangers - Performance descriptions and general test procedures for determining performance
TS 3597 ISO 921 Nuclear energy - Terms and definitions
TS EN 3781 Aviation series - Guide grooves for spiral wound retaining rings - Design standard
TS EN ISO 7345 Thermal insulation - Physical quantities and recipes
TS ISO 7967-7 Internal combustion engines - Moving and moving - Terms for parts and systems - Part 7: Control systems
TS EN ISO 9229 Thermal insulation - Terms and definitions
TS EN ISO 9488 Solar energy - Terms and definitions
TS ISO 11086 Gas turbines - Terms and definitions
TS 11740 Gas industry - Terms and definitions - for gas consumption devices used in residential, commercial and similar buildings
TS IEC 60050-393 International electrotechnical terms and descriptions section 393: Nuclear instrumentation: Physical phenomena and basic concepts
TS IEC 60050-394 International electrotechnical terms and definitions - Part 394: Nuclear instrumentation- Devices
TS IEC 60557 IEC terms and descriptions in the field of nuclear reactors
TSE CLC / TS 61836 Photovoltaic solar power systems - terms, descriptions and symbols
Electrical Engineering Terms
TS EN 60276 Description and classification of coal brushes, brush carriers, collectors and rings
TS EN 60383-1 Insulators for air lines Section with rated voltage above 1000 volts 1: Definitions, test methods and acceptance criteria for ceramic or glass insulator units-AA systems
TS EN 60633 High-voltage direct current energy transport terminology
TS EN 60383-1 / A11 Insulators for air lines - Part with rated voltage above 1000 volts 1: Ceramic or glass insulator units - Definitions, test methods and acceptance criteria for Aa systems
TS IEC 60050-191 + A1 + A2 International Electrotechnical Glossary - Part 191: Work safety and service quality
TS IEC 60050-411 International Electrotechnical Glossary Section 411: Rotary Machines
tst IEC 60050-881 Terms and definitions used in electrotechnics - Radiology and radiological physics
TS EN 80000-6 Quantities and units - Part 6: Electromagnetism
TS 7370 IEC 50-161: 1996 / T1 (Amended Amendment TS 7370 IEC 60050-161)
TS IEC 60050-826 International Electrotechnical Glossary - Part 826: Electrical Installations
TS EN 60763-1 Requirements for laminated prespen - Part 1: Definitions, classification and general rules
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
tst 7515 Terms and definitions used in electrotechnics-Space radio communication
tst 5301 Terms and definitions used in electrotechnics-Power electronics
TS IEC 60050-441 International Electrotechnical Glossary Section 441: Switchgear, controlgear and fuses
TS IEC 60050-151 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices
TS IEC 60050-448 International Electrotechnical Glossary - Part 448: Power System Protection
tst IEC 60050-841 Terms and definitions used in electrotechnics-Electric heating in industry
tst IEC 60050-811 Terms and definitions used in electrotechnics -Electric draw frame
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
tst IEC 60050-845 International Electrotechnical Glossary-Section 845: Lighting
TS IEC 60050-826 International Electrotechnical Glossary - Part 826: Electrical Installations
TS IEC 60050-151 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices
TS IEC 60050-441 International Electrotechnical Glossary Section 441: Switchgear, controlgear and fuses
TS IEC 60050-441 / A1 International Electrotechnical Glossary Section 441: Switchgear, controlgear and fuses
TS IEC 60050-151: 2001 / A1 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices
TS IEC 60050-151: 2001 / A2 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices
TS IEC 60050-151 / A1 REPLACEMENT 1 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices
TS IEC 60050-151 / A2 REPLACEMENT 2 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices
TS IEC 60050-441 / A1 Amendment 1 International Electrotechnical Glossary - Part 441: Switchgear, controlgear and fuses
TS EN 80000-6 Sizes and units - Part 6: Electromagnetism
TS EN 60641-1 Specifications of cardboard and pressed paper for electrical purposes - Part 1: Definitions and general rules
TS IEC 60050-191 + A1 + A2 International Electrotechnical Glossary - Part 191: Work safety and service quality
TS 5009 Terms and definitions used in electrotechnics-Rotary electrical machines
TS 4833 Terms and definitions used in electrotechnics- Electrical relays
TS 5301 Terms and definitions used in electrotechnics-Power electronics
TS 5380 Terms and definitions used in electrotechnics-Telegraph and telephone
TS 5574 Varnished fabrics for electrotechnics - Definitions and general rules
TS 6843 Terms and definitions used in electrotechnics-Electricity tariffs
TS 6984 Terms and definitions used in electrotechnics-Generation, transport and distribution of electrical energy-Section 3-Planning and management of energy system
TS 7032 Terms and definitions used in electrotechnics-Measuring transformers
TS 7033 Terms and definitions used in electrotechnics-Generation, transmission and distribution of electrical energy section 1-General
TS 7211 Terms and definitions used in electrotechnics-Generation, transmission and distribution of electrical energy 4-Operation
TS 7212 Terms and definitions used in electrotechnics - Generation, transmission and distribution of electrical energy
TS 7370 IEC 50-161 International Electrotechnical Glossary Section 161- Electromagnetic Compatibility
TS 7454 Terms and definitions used in electrotechnics - Transducers
TS 7514 Terms and definitions used in electrotechnics-Remote control
TS 7515 Terms and definitions used in electrotechnics-Space radio communication
TS 7718 Terms and definitions used in electrotechnics-Generation, transmission and distribution of electrical energy-Section 2-Production
TS 9057 Automatic control - Terms and definitions used in electrotechnics
TS 12133 Terms and definitions used in electrotechnical lighting
TS IEC 60050-806 International Electrotechnical Glossary - Chapter 806: Recording and reading audio and video
TS IEC 60050-121 Terms and definitions used in electrotechnics - part 121: Electromagnetism
TS IEC 60050-461 Terms and definitions used in electrotechnics - part 461: Electrical cables
TS IEC 60050-111 International electrotechnical terms and recipes - part 111: Physics and chemistry
IEC 60050-841 International Electrotechnical Glossary - Part 841: Industrial Electro
TS IEC 60050-221 Terms and definitions used in electrotechnology - Part 221: Magnetic materials and components
TS IEC 60050-421 Terms and descriptions used in electrotechnics subsection 421. power transformers and reactors
TS IEC 60050-481 Terms and definitions used in electrotechnics - Part 481: Primary cells and batteries
TS IEC 60050-891 Terms and definitions used in electrotechnics - Part: 891-Electrobiology
TS EN 60071-1 Insulation coordination - Part 1: Definitions, principles and rules
TS EN 60276 Definitions and terms related to carbon brushes, brush holders, collectors and rings for electrical machines
TS EN 60464-1 Varnishes - Part used for electrical insulation 1: Definitions and general characteristics
TS EN 60464-1 / A1 Varnishes for electrical insulation - Part 1: Definitions and general characteristics
TS EN 60555-1 Deterioration caused by the supply of electrical appliances used in domestic and similar areas - Part 1: Definitions
TS EN 60641-1 Specifications of cardboard and pressed paper for electrical purposes - Part 1: Definitions and general rules
TS EN 60674-1 Plastic films for electrical purposes - Part 1: Definitions and general features
TS EN 60684-1 Flexible insulating sleeves - Part 1: Definitions and general rules
TS EN 61067-1 Strips - Woven from glass fibers and glass-polyester fibers - Part 1: Definitions, classification and general characteristics
TS EN 61068-1 Webbing tapes - Polyester fibers - Specification - Part 1: Definitions, designation and general characteristics
TS EN 61086-1 Specifications for coatings used in printed circuit boards - Part 1: Definitions, classification and general rules
TS EN 61360-4 Standard data element types with related classification scheme for electrical elements section 4: IEC standard data element types, components, classes and terms
Electronic Terms
TS EN ISO 15367-1 Laser and laser-related equipment - Test methods for determining the shape of the laser beam waveform - Part 1: Terms, descriptions and key features
TS EN ISO 11807-1 "integrated optics - Terms and definitions - Part 1: Basic terms and symbols"
TS EN ISO 11807-2 "integrated optics - Terms and definitions - Part 1: Basic terms and symbols"
TS EN ISO 15902 Optics and photonics - Separating optics - Terms and definitions
TS EN ISO 15902 Optics and photonics - Diffraction optics - Terms and definitions
TS EN 62341-1-2 Organic light-emitting diode screens-Part 1-2: Terms and letter symbols
TS EN 61988-1 Plasma displays - Part 1: Terminology and letter symbols
TS IEC 60050-581 International Electrotechnical Glossary - Part 581: Electromechanical components of electronic devices
TS IEC 60050-521 International Electrotechnical Glossary - Part 521: Semiconductor elements and integrated circuits
TS EN ISO 11145 Optical and photonics - Lasers and laser-related equipment - Terms and symbols
TS EN ISO 14880-1 Optics and photonics - Microlens array - Part 1: Terms, descriptions and general features
TS EN ISO 11807-2 Integrated optics - Terms and definitions - Part 2: Terms used in classification
TS EN ISO 11807-1 Integrated optics - Terms and definitions - chapter 1: Basic terms and symbols
TS 2043 Measurement of electrical properties of microwave tubes-Terms
TS 3845 Pulse terms and definitions
Terms and definitions used in TS 10491 Electrotechnics: Electronics
TS IEC 60748-1 Semiconductor components - Integrated circuits - Part 1: General
TS EN 61086-1 Specifications for coatings used in printed circuit boards - Part 1: Definitions, classification and general rules
TSE ETSI EN 102 436 V1.2.1 Electromagnetic compatibility and radio spectrum issues (erm); 865 mhz - Short range devices intended for operation in the 868 mhz band (srd); Guidelines for the installation and commissioning of a radio frequency recognition (rft) device in Uhf
Integrated digital network services (ISDN) - User to user signaling complementary service - Digital subscriber signaling system no 300286 protocol - Part 2: Protocol generation approval status draft specification
Telecommunication. Audio and Video Engineering Terms
TS EN 62261-2 Television data - Part 2. data decoding protocol using key length value
tst 7515 Terms and definitions used in electrotechnics-Space radio communication
TS 5073 Description and measurement methods of transmitter characteristics in the 25-470 mhz band for military purpose frequency modulation (fm) or phase modulation (pm)
TS 5380 Terms and definitions used in electrotechnics-Telegraph and telephone
TS 7415 Description and measurement methods of receiver characteristics in the military 25-947 mhz band with frequency modulation (fm) or phase modulation (pm)
TS 7515 Terms and definitions used in electrotechnics-Space radio communication
TS 7649 Terms and definitions used in electrotechnics-Transmission errors and waveguides
TS EN 50290-1-2 Communication cables - Part 1-2: Definitions
TS IEC 60050-806 International Electrotechnical Glossary - Chapter 806: Recording and reading audio and video
TS EN 61120-4 Two-reel digital tape recorder system using 6,3 mm magnetic tape for professional use - Part 4: Magnetic tape specifications - Definitions and measurement methods
TS EN 61925 Multimedia systems and devices - Multiple home server systems - Home server glossary
TS EN 62261-1 Television data - Part 1. data dictionary structure
TS EN 62333-1 Noise suppression layer for digital devices and devices - Part 1: Terms and definitions
TS EN 300462-1-1 V 1.1.1 Transmission and multiplexing (tm) - Generic requirements for synchronization networks - Part 1-1: Definitions and terminology for synchronization networks
Information Technology, Office Machines Terms
TS EN 62261-2 Television data - Part 2. data decoding protocol using key length value
TS EN ISO 11073-10407 Health informatics-Personal health device communication- Part 10407: Device identification- Blood pressure monitoring
TS EN ISO 11073-10408 Health informatics-Personal health device communication- Part 10408: Device identification- Thermometer
TS EN ISO 11073-10471 Health informatics-Medical device communication maintenance point- Part 10471: Device identification- Independent live activity center
ISO EN / IEC 19762-3: 2012 Information technology-Automatic identification and data acquisition (AIDC) techniques-Harmonized dictionary-Part 3: Radio frequency identification (RFID)
Information technology - Automatic identification and data retrieval (AIDC) techniques - Harmonized dictionary - Part 19762: General terms related to AIDC TS EN ISO / IEC 1-1
tst 13079 Internet service provider - Terms and recipes
TS EN 15213-1 Intelligent transportation systems - after-theft systems for stolen vehicle recovery - Part 1: Reference architecture and terminology
TSE CLC / TR 50584 Information technology - CENELEC / ETSI glossary for broadband deployment including sustainability issues
TS EN 80000-13 Sizes and units - Part 13: Information science and technologies (IEC 80000-13: 2008)
S EN ISO 11073-10471 Health informatics - Medical device communication point of care- Part 10471: Device identification- Independent live activity center
ISO EN / IEC 19762-3: 2012 Information technology-Automatic identification and data acquisition (AIDC) techniques-Harmonized dictionary-Part 3: Radio frequency identification (RFID)
Information technology - Automatic identification and data retrieval (AIDC) techniques - Harmonized dictionary - Part 19762: General terms related to AIDC TS EN ISO / IEC 1-1
tst 13079 Internet service provider - Terms and recipes
TS EN 15213-1 Intelligent transportation systems - after-theft systems for stolen vehicle recovery - Part 1: Reference architecture and terminology
TSE CLC / TR 50584 Information technology - CENELEC / ETSI glossary for broadband deployment including sustainability issues
TS EN 80000-13 Sizes and units - Part 13: Information science and technologies (IEC 80000-13: 2008)
TS ISO 2382-22 Information technology - Terms and recipes - Part 22: Calculators
TS 10146 EN 1556 Barcoding - Terminology
TS EN ISO 11073-10101 Health informatics - External test medical device communication - Part 10101: Nomenclature
TS 13079 Internet service provider - Terms and definitions
TS 13092 Online shopping services - General rules
TS EN 62261-1 Television data - Part 1. data dictionary structure
Image Technology Terms
TS ISO 6196-8 Micrographs - Terms and definitions - Part 8: Operation
TS EN 14096-1 Non-destructive testing - Characterization of digitalization systems for radiographic films - Part 1: Definitions, qualitative measurements of image quality parameters, standard reference film and quantitative control
TS ISO 6196-1 Micrographs - Terms and definitions - Part 1: General terms
TS ISO 6196-2 Micrographs - Terms and descriptions - chapter 2: Image positions and recording methods
TS ISO 6196-3 Micrographs - Terms and definitions - Part 3: Film processing
TS ISO 6196-4 Micrographs - Terms and recipes - Part 4: Materials and packaging
TS ISO 6196-5 Micrographs - Terms and definitions - Part 5: Image quality, readability, inspection
TS ISO 6196-6 Micrographs - Terms and definitions - Part 06: Hardware
TS ISO 6196-7 Micrographs - Terms and definitions - Part 7: Computer micrographs
TS ISO 9211-1 Optics and photonics - Optical coatings - Part 1: Definitions
TS 8440 Photography- Pre-packaged chemicals for the processing of silver halogen salts used in photography- Terms
TS ISO 10934-1 Optical and optical devices - Terms and definitions related to microscope - part 1: Light microscope "
Precision Mechanics, Jewelery Terms
TS EN 28653 Jewelery-Ring sizes-Description, measurement and brief display
TS ISO 1112 Watch science - Functional and non-functional jewelery
TS ISO 6426-1 Terms related to horology - Part 1: Technical and scientific descriptions
TS ISO 6426-2 Terms relating to horology - Part 2: Technical and commercial descriptions
TS EN ISO 11210 Determination of platinum in platinum jewelery alloys-Gravimetric method after precipitation of diammonium hexachloroplatinate
Terms of Road Vehicles Engineering
TS EN ISO 8092-1 Road vehicles - Connections for surface electrical installation - Single pole connection tables - Dimensions and special requirements
TS ISO 12097-1 Road vehicles - Airbag components - Part 1: Terms
TS ISO 11838 Motorcycle and motorcycle driver kinematics - Terms and definitions
TS EN 13878 Temporary residence - Terms and description
TS EN 15429-1 Garbage sweepers - Part 1: Terms and classification
TS ISO 6726 Mopeds and two-wheel motorcycles - Masses - Terms and recipes
tst 6925 Internal combustion spark ignition engines-Ignition systems-Terms, descriptions
TS ISO 611 Road vehicles - Braking systems of motor vehicles and their trailers - Terms
TS 5386 Road vehicles-Collisions-Terms and recipes
TS ISO 1176 Road Vehicles - Masses - Terms, recipes and codes
TS ISO 6518-1 Road vehicles - Ignition systems - Part 1: Terminology
tst ISO 7637-1 Road vehicles - Electrical disturbances due to transmission and coupling - Part 1: Definitions and general considerations
TS 4457 Road vehicles - Terms and definitions
TS EN ISO 14451-1 Pyrotechnic materials - Pyrotechnic materials for vehicles - Part 1: Terminology
TS EN ISO 18542-1 Road vehicles - Standard repair and maintenance information (RMI) Terminology - Part 1: General information and use case description
TS EN ISO 18542-2 Road vehicles - Standard repair and maintenance information (RMI) terms - Part 2: Standard processing application requirements, registration authority (ISO 18542-2: 2014)
TS ISO 611 Road vehicles-Brake systems of motor vehicles and their trailers-Definitions
TS EN ISO 18542-2 Road vehicles - Standard repair and maintenance information (RMI) terms - Part 2: Standard processing application requirements, registration authority (ISO 18542-2: 2014)
TS ISO 6726 Mopeds and two-wheel motorcycles - Masses - Terms
TS ISO 1176 Road vehicles-Mass recipes
TS EN ISO 15007-1 Road vehicles - Measurement of the visual capability of the driver according to transport information and control systems - Part 1: Definitions and parameters
TS ISO 8855 Road vehicles - Vehicle dynamics and road holding ability - Terms and definitions
11838: 1997 / Amd 1: 2011 Motorcycle and motorcycle rider kinematics - Terms and definitions; AMD 1
TS EN ISO 14451-1 Pyrotechnic substances - Pyrotechnic substances for vehicles - Part 1: Terminology
TS ISO 6621-1 Internal combustion engines - Piston rings - Part 1: Terms and definitions
TS ISO 6621-1 Internal combustion engines - Piston rings - Part 1: Terms and definitions
tst 5370 Service classification of mineral oils used in engine crankcase
TS 1305 Dimensions and designation of motor vehicles and trailers
TS EN 15532 Bicycles - Terminology
TS ISO 3536 Road vehicles-Safety glassware-Terms and recipes
TS 6555 Road vehicles-Dimensions of two-wheeled motorcycles and mopeds-Terms and definitions
TS ISO 7637-1 Road vehicles - Electrical disturbances resulting from transmission and coupling - Part 1: Definitions and general considerations
TS EN 13447 Electrically powered road vehicles - Terms and definitions
TS EN 13878 Temporary residence vehicles - Terms and definitions
TS EN 15532 / tst AC Bikes - Terminology (german version)
Railway Engineering Terms
TS EN 13232-1 Railway applications-Railway-Shears and intersecting railways-Part 1. recipes
TS EN 1907 Rules for passenger transport - Safety rules - Terms and definitions
tst 12740-2 Railway vehicles - Terminology section 2: Nomenclature of railway vehicle parts
TS EN 13232-2 + A1 Railway applications-Railway-Shears and intersecting railways-Part 2: Rules for geometric design
TS EN 13232-3 + A1 Railway applications-Railway-Shears and intersecting railways-Part 3: Rules for wheel / rail interaction
TS EN 13232-4 + A1 Railway applications - Road joining (truss) and crossings - Part 4: Movement, locking and searching
TS EN 13232-5 + A1 Railway applications - Road - Junction (truss) and crossings - Part 5: Junctions (truss)
TS EN 13232-6 + A1 Railway applications - Road - joining (truss) and crossings - Part 6: Fixed, joint and blind (closed) crossings
TS EN 13232-7 + A1 Railway applications - Rail - Tongues and hubs of shears - Part 7: Moving part hubs
TS EN 13232-9 + A1 Railway applications - Railway - Tongues and hubs of shears - Part 9: Installations
TS 12744 RAILWAY ENGINEERING - ROAD CONSTRUCTION TERMS
TS EN 13232-1 Railway applications-Railway-Shears and intersecting railways-Part 1. recipes
TS EN 13232-2 + A1 Railway applications-Railway-Shears and intersecting railways-Part 2: Rules for geometric design
TS EN 13232-3 + A1 Railway applications-Railway-Shears and intersecting railways-Part 3: Rules for wheel / rail interaction
TS EN 13232-4 + A1 Railway applications - Road joining (truss) and crossings - Part 4: Movement, locking and searching
TS EN 13232-5 + A1 Railway applications - Road - Junction (truss) and crossings - Part 5: Junctions (truss)
TS EN 13232-6 + A1 Railway applications - Road - joining (truss) and crossings - Part 6: Fixed, joint and blind (closed) crossings
TS EN 13232-7 + A1 Railway applications - Rail - Tongues and hubs of shears - Part 7: Moving part hubs
TS EN 13232-9 + A1 Railway applications - Railway - Tongues and hubs of shears - Part 9: Installations
TS EN 1907 Safety rules for rope installations designed for the carriage of people - Terms and definitions
TS 12605 Railway applications - Guide to the use of terminology for railway operations
TS 12740-1 Railway vehicles - Terminology - Part 1: General terms
TS 12740-2 Railway vehicles - Terminology section 2: Nomenclature of railway vehicle parts
TS 12740-3 Railway vehicles - Terminology - Part 3: Towing and towing equipment - Terms
TS 12740-4 Railway vehicles - Terminology - Part 4: Road construction and test vehicles - Terms
TS EN 14478 Railway applications - Braking - Generic dictionary
TS EN 15663 Railway applications - Definitions of vehicle reference bodies
TS EN 15663 / AC Railway applications - Definitions of vehicle reference bodies
TS IEC 60050-821 International Electrotechnical Glossary - Part 821: Signaling and Safety Devices for Railways
Shipbuilding and Maritime Terms
TS EN ISO 8384 Ships and marine technology - Floating underwater dredging machines - Terms and recipes
TS EN ISO 8384 Vessels and marine technology - Seabed dredging machines- Terms and recipes
Ships and marine technology - Propulsion mechanisms for ships - Part 3715: Terms and definitions related to the propeller geometry
Ships and marine technology - Propulsion mechanisms for ships - Part 3715: Terms and definitions of controlled range propeller mechanisms
TS IEC 60092-101 Electrical installations - Ships - Section 101: Definitions and general specifications
TS ISO 3828 Shipbuilding and marine structures - Deck machinery - Terms and symbols
TS 10166 Shipbuilding-Propellers terms
TS ISO 3828 Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols
TS 7025 Steel Rope Reels - For Ships
TS ISO 8147 Shipbuilding and ship structures - Cranes and parts groups
TS 8407 Terms and definitions for computer applications related to ship main dimensions
TS EN 13551 Inland water navigation vessels - Terms and recipes
TS IEC 60092-101 / A1 Electrical installations - On ships - Part 101: Definitions and general characteristics
TS IEC 60092-504: 2011 Electrical installations - Ships - Part 504: Special details - Control and installation
Aircraft and Space Vehicle Engineering Terms
TS 2563 FLIGHT DYNAMICS - CONCEPTS, QUALIFICATIONS AND SYMBOLS - AIRCRAFT BALANCE AND CONTROL
TS 7062 Flight dynamics-Concepts, values and symbols-Motion of airplane and atmosphere according to ground
TS EN 13701: 2001 Space systems - Terms and definitions
TS 2560 Flight dynamics - Concepts, quantities and symbols - Air motion
TS EN 16601-00-01: 2015 Space systems - Glossary of terms
TS EN 16601-00-01 Space systems - Glossary of terms
TS 2561 Flight dynamics terms and symbols part II-Aircraft and atmosphere relative to ground
TS 2562 Flight dynamics terms and symbols part III: Forces, moments and their coefficients
TS 2564 Flight dynamics terms and symbols part v: Quantities used in measurements
TS 7062 Flight dynamics-Concepts, values and symbols-Motion of airplane and atmosphere according to ground
Freight Handling Equipment Terms
TS EN 15878 Steel static storage systems - Terms and definitions
tst 9511 Construction and excavation machinery - Dumpers - Terms and general specifications
TS EN ISO 6165 Construction and excavation machinery - Basic types - Definition, terms and descriptions
TS ISO 7132 Earthmoving machinery - Tipper - Terminology and commercial properties
TS ISO 7132 Earthmoving machines - Dumpers - Terms and Commercial Properties
TS EN 1837 + A1 Safety in machinery - Lighting systems integrated in machinery
TS ISO 4306-2 Cranes-Terms-Section 2: Overhead cranes
TS ISO 4306-2 Cranes - Terms and definitions - Part 2: Overhead traveling cranes
TS ISO 7135 Construction and excavation machinery - Hydraulic excavators - Terms and commercial specifications
TS ISO 10263-1 Construction and excavation machinery -Environmental conditions within the operator's compartment-Section 1 general and recipes
TS 12578 Authorized services - Handling and handling - Rules
TS EN 1837 + A1 Safety in machinery - Integrated lighting of machinery
TS 2088 Handling equipment - Terms
TS ISO 4306-5 Cranes - Terms - Part 5: Bridge and gantry cranes
TS ISO 4306-3 Cranes - Terms - Section 3: Tower cranes
TS ISO 4306-1 Cranes - Terms - Part 1: General
TS ISO 5053 Motorized industrial vehicles - Terms
TS ISO 8927 Construction and excavation machines-Machine availability-Terms
TS 9670 ISO 7136 Construction Excavators - Pipe Layers - Recipes and Technical Specifications
TS 10111 ISO 1837 Lifting hooks - designation
TS 10125 stacker (fork lift) - Hook type - Fork arms - Terms
TS ISO 11994 Cranes - Usability - Terms and definitions
TS 13344 Backpack - Military
TS EN ISO 21183-2 Lightweight conveyor belts - Part 2: List of equivalent terms
Packaging and Distribution Terms
TS 1118-1 EN ISO 90-1 Thin metal containers - Definitions and determination of dimensions and capacities - Part 1: Open top boxes
TS EN ISO 15867 Bulk cargo containers for the intermediate processing of non-dangerous goods (adyk) "
TS EN 14182 Packaging - Terminology - Basic terms and definitions
TS EN 12374 Packaging - Flexible tubes - Terms
TS ISO 830 Freight containers
TS 11763 / T1 Series1-Cargo containers-Non-pressurized dry cargo containers
TS EN ISO 445 Pallets for loading and unloading materials - Glossary
TS EN ISO 445 Pallets - For loading and unloading materials - Terms and definitions
TS 11763 Seri1-Cargo containers-Non-pressurized dry cargo containers
TS 1118-3 EN ISO 90-3 Thin metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans
TS EN 415-1 Packaging machines - Safety - Part 1: Packaging machines and related equipment - Terms and classification
TS ISO 830 Freight containers
TS ISO 830 / Cor 1 Freight containers
TS ISO 830 / Cor.1 Cargo containers - Terms
TS EN 12674-1 Cylindrical containers - Part 1: Terms
TS EN 13193 Packaging - Packaging and environment - Terms and definitions
TS EN 14182 Packaging - Terminology - Basic terms and definitions
Textile and Leather Technology Terms
TS EN ISO 4921 Knitting-Main concepts-Terms and recipes
TS EN ISO 105 A08 Textiles - Color fastness tests - Part a08: Terminology used in color measurement
TS EN ISO 8388 Knitted fabrics - Species - Terms and definitions
TS EN ISO 1968 Ropes and cords - Terms and definitions
TS ISO 5248 Textile machinery and accessories - Dyeing and finishing machinery - Terms and definitions for complementary devices
TS ISO 5234 Textile machinery and accessories - Metal comb wires - Dimensions, types and recipes for assembly
TS ISO 7839 Textile machinery and accessories - Knitting machines - Terms and classification
TS EN ISO 9092 Textile - Nonwoven - Recipe
TS EN ISO 2076 Textile - Artificial fibers - Group names (ISO 2076: 2013)
TS EN ISO 2076 Textile - Artificial fibers - Group names
TS EN ISO 6938 Textile - Natural fibers - Group names and recipes (ISO 2012): 6938
TS EN 15987 Leather - Terminology - Key definitions for leather trade
TS EN ISO 10318-1 Geotextiles - Terms and definitions: Part-1
tst 1415 Cotton system - Descriptions of operating phases in spinning
tst 7260 Terms and descriptions of color and other appearance properties of matter
TS 627 Yarn defects
TS 1007 Textile machinery and accessories - Spinning machines - Description of right and left sides
TS 1415 Cotton system - Descriptions of operating phases in spinning
TS 1416 STRAYHGARN SYSTEM-Descriptions of operating phases in spinning
TS 1417 Definitions of operating phases in worsted system spinning
TS EN 1885 Textile-Feather-Terms and recipes
TS EN 1885 / A1 Textile-Feather-Terms and recipes
TS 2459 Definition of main tissues and general terms related to tissue
TS 3086 Textile machinery and accessories-Terms related to drafting of spinning machines
TS 3230 Definitions of finishing processes for weaving and knitting products in textile industry
TS 3394 Textile machinery and accessories-Showing and naming of beads according to the location of the beads
TS 4637 Names and descriptions of natural fibers
TS 4737 Textile - Mass determination - Terms
TS 5085 Wool and mohair terms
TS 5416 ISO 4880 Combustion properties of textile materials and products-Terms and definitions
TS 5567 Textile machinery and accessories-Spinning, spinning and twisting machines-Basic terms
TS 5704 Textile machinery and accessories - Winding - Basic terms and descriptions
TS 6348 Textile machinery and accessories - Weaving machinery - Classification and terms
TS 7127 Textile machinery and accessories-Rollers for folding and twisting-Dimensions and terms
TS 7174 Textile machinery - Fabric winders - Terms and dimensions
TS 7260 Terms and definitions of color and other appearance properties of matter
TS 7616 ISO 8116-1 Textile machinery and accessories-Leventler-Section 1: General terms and descriptions
TS 7621 Textile machinery and accessories - Yarn and intermediate packages - Terms
TS 7688 Morphology of textile fibers and yarns, terms
TS 7691 ISO 1505 Textile machines-Widths for dyeing and finishing machines-Definitions and range of nominal widths
TS 7692 Textile machinery and accessories - Dyeing and finishing machinery - Terms for stretch drying machines
TS ISO 8499 Textile - Knitted fabrics - Error recipes - Terms
TS ISO 10132 Textile - Textured filament yarns - Recipes
TS EN 13360 Rubber or plastic coated fabrics - Terminology
Agricultural Terms
TS ISO 10185 Tobacco and tobacco products-Dictionary
TS EN 12325-3 Irrigation techniques - Circular and linear moving (central axis and laterally moving) systems - Part 3: Technical terms and classification
TS EN 12944-1 Fertilizers and calcifying agents - Terms and definitions - Part 1: General terms
TS EN 12944-3 Fertilizers and calcifying agents-Terms and definitions-Part 3: Terms related to calcining agents
TS EN 12944-3 Fertilizers and calcifying agents - Terms and definitions - part 3: Terms related to calcining agents
TS ISO 6531 Forestry machines - Portable chain saws - Terms and descriptions
TS 12796 Wetlands - Protection rules
TS ISO 3918 Milking machine plants - Terms
TS ISO 3918 Milking machine plants - Terms
TS ISO 6814 Forestry machinery - Portable and self-propelled equipment - Terms, recipes and classification
tst 3871 Terms and definitions related to aquaculture-fish farming
tst 3862 Agricultural and forestry machinery - Tractors, tools and machines - Classification
TS 1305 Dimensions and designation of motor vehicles and trailers
TS 3329 Indigenous forest tree, shrub and shrub seeds, terms - Definitions
TS 3379 Terms related to the tools and machinery used in viticulture and wine production
TS 3379 / T1 Terms of tools and machinery used in viticulture and wine production
TS 3692 Rakes (used in seed bed preparation) terms and definitions
TS 3693 Rakes (used in grass mechanization) terms and definitions
TS 3695 Fruit-Fruit sapling production (nursery) Terms and definitions
TS 3739 Breeds related to cattle, sheep, goats, horses, buffaloes and camels-Terms and definitions
TS 3755 Terms and definitions of plows
TS 3756 Terms related to paddy processing
TS 3854 Aquaculture - Hunting equipment and terms and definitions
TS 3855 Aquaculture - terms and definitions related to fish diseases and treatments
TS 3862 Agricultural and forestry machinery - Tractors, tools and machines - Classification
TS 3871 Aquaculture-Fish breeding terms and definitions
TS 3875 Terms and definitions related to plant aquaculture
TS 3980 Harvesting and threshing machines
TS 3999 Terms and definitions related to agricultural tractors
TS 4058 Viticulture- Terms and definitions
TS 4076 Vine rootstocks - Definitions
TS 4077 ISO 5681 Terms and definitions of plant protection equipment and machinery
TS 4450-1 ISO 6689-1 Harvesters - Combine harvesters and functional elements - Part 1: Terms and definitions
TS 5062 Forage crops-Terms and recipes
TS 5297 Ornamental trees, shrubs and shrubs-Naming
TS 5421 Aquaculture-Population dynamics-Terms and recipes
TS 5628 Slaughterhouse products-Terms and recipes
TS 6243 Fishing nets - Hanging the net - Basic terms and definitions
TS 6354 EN ISO 1107 Fishing nets - Networking - Basic terms and definitions
TS 6423 Grain cleaning machines terms and definitions
TS 6734 Silkworm-Terms and recipes
TS ISO 7112 Forest machines-Portable, hand-held shrub cutters and lawn pruners-Terms and recipes
TS 7124 Fishing nets - Connecting and connecting the net-Terms and shapes
TS 7272 Hydraulic control terms and definitions of automatic irrigation systems
TS 7513 Seed-Terms and recipes
TS 7899 Butchery live animals terms and recipes-Cattle
TS 7900 Butchery live animals terms and recipes-Sheep
At TS 7950 Butchery live animals terms and recipes
TS 8056 Irrigation - Terms and recipes
TS 8463 Terms and definitions related to barn mechanization
TS 9414 Sheep-Term and recipes
TS 9741 Lime (used in agriculture) - Terms and recipes
TS 10528 Forest cadastre-Terms and recipes
TS 11100 Pesticides - Terms and recipes
TS 11184 Forest cultivation -Time and recipes
TS 11628 Animal nutrition-Terms and definitions
TS EN 12325-3 Irrigation techniques - Circular and linear moving (central axis and laterally moving) systems - Part 3: Technical terms and classification
TS EN 12484-2 Irrigation techniques - Automatic lawn irrigation systems - Part 2: Description and design of typical technical models
TS 12795 Birds- Protection rules- General information
TS 12796 Wetlands - Protection rules
TS 12797 Wetlands - Terms, recipes
TS 12798 Wetlands - Identification and monitoring rules
TS 12799 Flora - Inventory rules - Seed plants and ferns
TS EN 12944-2 Fertilizers and calcifying agents - Terms and definitions - Part 2: Terms and definitions for fertilizers
TS EN 13635 Irrigation techniques-Position irrigation systems-Terminology and data provided by the manufacturer
TS ISO 13860 Forestry machines - Feeders - Terms, descriptions and commercial features
TS ISO 13861 Forestry machines - Roundwood loaders with wheels - Terms, descriptions and commercial features
TS ISO 13862 Forestry machines - Tipping tools - Terms, descriptions and commercial features
Food Technology Terms
TS EN ISO 676 Seasonings and condiments-Botanical naming
TS EN ISO 5492 Sensory analysis - Terms and definitions (ISO 5492: 2008)
TS EN ISO 5526 Cereals, legumes and other grained foods - Nomenclature
TS EN ISO 5526 Cereals, legumes and other granular foods - Nomenclature
TS 1880 EN 13188 / T2 Vinegar-Product of agricultural origin-recipes, specifications, marking
TS EN ISO 3493 Vanilla-Dictionary
TS EN ISO 5492 Sensory analysis - Terms and definitions
TS EN ISO 3493 Vanilla-Dictionary
TS 3737 Poultry - Terms and recipes
TS EN ISO 5527 Cereals - Terms and recipes
tst EN ISO 5527 Cereals- Terms and recipes
TS ISO 3509 Coffee and coffee products - Terms and recipes
tst 4225 Animal aquaculture-Marine fish-Definitions
TS 1880 EN 13188 / D1 Vinegar-Product of agricultural origin-recipes, specifications, marking
TS 1880 EN 13188 Vinegar-Product of agricultural origin-recipes, specifications, marking
TS 1880 EN 13188 / T1 Vinegar-Product of agricultural origin-recipes, specifications, marking modification 1
TS 3908 Fish processing technology and marketing-Terms and definitions
TS 3908 / T1 Fish processing technology and marketing-Terms and definitions
TS ISO 4125 Dried fruits and dried fruits - Recipes and naming
TS 4225 Animal aquaculture-Marine fish-Definitions
TS 4226 Animal aquaculture-Crustaceans-Definitions
TS 4227 Animal aquaculture-Molluscs-Definitions
TS 4295-1 ISO 1956-1 Fruits and vegetables - Part 1: Morphological and structural terms
TS 4295-2 ISO 1956-2 Fruits and vegetables - Part 2: Morphological and structural terms
TS 4351 Vegetables-Naming
TS 4351 / tst T1 Vegetables-Naming
TS 4806 Milk and its products terms
TS 5328 Aquaculture-Inland fish terms and recipes
TS 5628 Slaughterhouse products-Terms and recipes
TS ISO 6078 Black tea-Terms and recipes
TS 11343 Wheat flour and products-Terms and recipes
TS 11888 Terms related to fruit juices and derivatives
Chemical Technology Terms
TS EN ISO 862 Surfactants - Terms and definitions
Laboratory materials - Injector - Part 8655: Terms, general specifications and instructions for use
TS EN 13857-1 Explosives for civil use - Part 1: Terminology
TS EN 14175-1 Fume cupboards - Part 1: Terms and directions
TS EN 16256-1 Pyrotechnic materials - Pyrotechnic materials for illustrations - Section 1: Terms and definitions
Pyrotechnic materials - Pyrotechnic materials for illustrative purposes - Part 16256: Terminology
TS EN ISO 9235 Aromatic natural raw materials
TS EN ISO 9235 / AC Aromatic natural raw materials
TS EN 16263-1 Pyrotechnic materials - Other pyrotechnic materials - Part 1: Terminology
TS EN 15947-1 Pyrotechnic materials- Fireworks-Category 1,2 and 3- Section 1: Terms and definitions
TS EN 15947-1 Pyrotechnic materials- Fireworks-Category 1,2 and 3- Section 1: Terms and definitions
TS 4931 Resin and derivatives - Terms and definitions
TS ISO 6286 Molecular absorption spectrometry- Terms and recipes- General- Apparatus and materials
TS 6772 Antiseptics and disinfectants - Part I - Terms and definitions
TS ISO 6955 Analytical spectroscopy methods- Flame emission, atomic absorption and atomic fluorescence spectrophotometry- Terms and definitions
TS EN ISO 8655-1 Laboratory materials - Piston metered materials - part 1: Terms, general specifications and recommendations for use
TS EN ISO 8655-1 / AC Laboratory materials - Piston metered materials - Part 1: Terms, general specifications and recommendations for use
TS 8894 Chemical products - Sampling terms used in industry
TS EN ISO 10991 Micro process engineering - Glossary
TS 11890 Ion selective electrodes-Terms
TS 12670 Civil explosives - Electric capsules
TS EN 12901 Inorganic support and filter media - Used for the treatment of drinking and potable water - Recipes
TS EN 13857-1 Civil explosives - Part 1: Terms and definitions
TS 12670 Civil explosives - Electric capsules
TS EN 12901 Inorganic support and filter media - Used for the treatment of drinking and potable water - Recipes
TS EN 13857-1 Civil explosives - Part 1: Terms and definitions
Mining and Minerals Terms
Tests for general properties of aggregates 10088: Process and terminology for simplified petrographic identification
TS 5694 EN 12670 Natural stones - Terms and definitions
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes
tst ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes
TS 2693 Mining terms-Used in drilling and blasting
TS 2694 Mining terms-Used in ventilation
TS 2695 Mining terms-Used in drainage
TS 2696 Mining terms-Used in transport
TS 2697 Mining terms-Used in production
TS 3099 Mining terms-Used in measurement and planning
TS 5962 Soil and rock mechanics-Terms and symbols-used in geology and mining
TS 6174 Precious and semi-transparent gemstones-Terms
Petroleum and Related Technologies
TS 8415 Terms and definitions used in natural gas pipeline equipment
TS EN ISO 14692-1 Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Terms, symbols, applications and materials
tst EN 14588 Solid biofuels - Terms, descriptions and explanations
TS EN 14588 Solid biofuels - Terms, descriptions and descriptions
tst 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms
TS EN 15357 Solid fuels recovery - Terminology, definitions and descriptions
TS EN 16214-1 Sustainability criteria for biofuels and biolic products for energy applications - Principles, criteria, indicators and validators - Part 1: Terminology
tst EN ISO 16559 Solid biofuels - Terms, descriptions, and explanations
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
ISO 14532: 2014 Natural Gas - Glossary
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS EN ISO 14532 Natural gas-Dictionary
TS ISO 1998-99 Petroleum industry - Terms and recipes - part 99: General and index
TS ISO 1998-1 Petroleum industry - Terms and definitions - Section 1: Raw materials and products
TS ISO 1998-2 Petroleum industry - Terms and recipes - Part 2: Features and experiments
TS ISO 1998-3 Petroleum industry - Terms and recipes - Part 3: Exploration and production
TS ISO 1998-4 Oil industry - Terms and recipes - Part 4: Distillation
TS ISO 1998-5 Oil industry - Terms and recipes -Part 5: Transport, storage, distribution
TS ISO 1998-7 Petroleum industry - Terms and definitions - Part 7: Miscellaneous terms
TS 4932 Activated charcoal- Terms and recipes
TS 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms
TS EN ISO 14692-1 Glass fiber reinforced plastic (ctp) pipe systems - part used in the oil and gas industry 1: Terms, symbols, applications and materials
TS EN 15529 Coal pyrolysis products - Terms and recipes
Metallurgical Terms
TS 4817 Copper and copper alloys - Terms and definitions - Formable products
TS 4818 Copper and copper alloys - Terms and definitions - Castings
TS EN 10001 Description and classification of pig iron
TS EN 10001 Description and classification of pig iron
TS EN 14057 Lead and lead alloys - Scrap - Terms and recipes
TS EN 12258-3 Classification of aluminum and aluminum alloy scrap
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS EN 14057 Lead and lead alloys - Scrap - Terms and recipes
tst EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms
TS EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms
TS EN ISO 8044 Corrosion of metals and alloys - Basic terms and definitions
TS EN 515 Aluminum and aluminum alloys - Formable products - Temper briefs
TS EN ISO 4885 Iron-based materials-Heat treatment - Dictionary
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS 3087 EN ISO 3252 Powder metallurgy-Terms and definitions
TS 4791 The main terms and definitions used in the metallurgical industry
TS 4815 Copper and copper alloys - Terms and definitions - Material
TS 4816 Copper and copper alloys - Terms and definitions - Refined semi-finished forms
TS 4819 Copper and copper alloys - Terms and definitions - Manufacturing and heat treatment methods
TSE ISO / TR 7003 Composite format for short representation of metals
TS ISO 8954-1 Ferroalloys - Terms and definitions - Part 1: Materials
TS ISO 8954-2 Ferroalloys- Terms and descriptions - Part 2: Sampling and sample preparation
TS ISO 8954-3 Ferroalloys-Terms and recipes-Part 3: Sieve analysis
TS EN 10020 Description and classification of steel types
TS EN 10079 Definitions of steel products
TS EN 10266 Steel pipes, fittings, structural hollow profiles - Symbols and descriptions for use in product standards
TS EN 12258-2 Aluminum and aluminum alloys - Terms and definitions - Part 2: Chemical analysis
TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry
TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap
TSE ISO / TR 12735-1 Mechanical testing of metals - Symbols used in conjunction with descriptions - Part 1: Symbols and descriptions in published standards
Tree Technology Terms
TS EN 633 Cemented particle boards - Description and classification
TS EN 844-1 Round and sawn wood (lumber) - Terms - Part 1: General terms for round and sawn wood
TS EN 844-2 Round and sawn wood (lumber) - Terms - Part 2: General terms for round wood
TS EN 844-4 Round and sawn wood (timber) terms - Part 4: Terms related to moisture content
TS EN 13556 Round and sawn wood (timber) - European timber terms
TS EN 13556 Round and sawn wood (timber) - Terminology of timber in Europe
TS EN 1001-1 Durability of wood and wood-based products-Terminology-Part 1: List of equivalent terms
TS EN 1001-2 Durability of wood and wood-based products-Terminology-Part 2: Glossary
TS EN 1001-1 Durability of wood and wood-based products - Terminology - Part 1: List of synonyms
TS ISO 633 Cork oak cork - Terms recipes
TSE CEN / TS 15679 Heat-treated timber (tmt) - Definitions and characteristics
TS 52 Round wood (general definitions and related standards)
TS 7465 Cork sheets - Recipes, classification and packaging
TS ISO 7570 Woodworking machine tools - Combined carpenter benches, (planing and planing) -Terminology, acceptance requirements and accuracy inspections
TS ISO 7570 Woodworking machine tools - Combined carpenter benches, (planing and planing) -Terminology, acceptance requirements and accuracy inspections
TS ISO 24294 Wood- Roundwood and timber- Terms and recipes
TS 52 Round wood (general definitions and related standards)
TS EN 844-3 Round and sawn wood (lumber) - Terms - Part 3: General terms for sawn wood (lumber)
TS EN 844-5 Round and sawn wood (timber) - Terms-Part 5: Terms related to the dimensions of round wood
TS EN 844-6 Round and sawn wood (lumber) - Terms - Part 6: Terms related to timber dimensions
TS EN 844-7 Round and sawn wood (lumber) - Terms - Section 7: Terms related to the anatomical structure of wood
TS EN 844-8 Round and sawn wood (lumber) - Terms - Part 8: Terms relating to the characteristics of round wood
TS EN 844-9 Round and sawn wood - Terms - Part 9: Terms relating to the properties of sawn wood
TS EN 844-10 Round and sawn wood (lumber) - Terms - Part 10: Terms relating to coloring and fungal damage
TS EN 844-11 Round and sawn wood (lumber) - Terms - Part 11: Terms related to insect damage
TS EN 844-3 / T1 Round and sawn wood (lumber) - Terms - Part 3: General terms related to sawn wood (lumber) amended 1
TS EN 844-12 Round and sawn wood (timber) -Terminology-Part 12: Additional terms and general index
TS EN 1001-2 Durability of wood and wood-based products - Terminology - Part 2: Glossary of terms
TS 2128 EN 313-2 Plywood - Classification and terms - Part 2: Terms
TS 4192 Wood floor blocks - Terms, definitions
TS 5204 EN 13756 Wooden flooring - Termology
TS 6139 Dry raw mushrooms, harvested mushrooms and residual mushrooms - Recipes and packaging
TS ISO 7009 Woodworking machines - Single spindle milling machine - Naming and acceptance requirements
TS 7465 Cork sheets - Recipes, classification and packaging
TS ISO 7571 Woodworking machines - Planing machine with one side knife spindle - Naming and acceptance requirements
TS ISO 9566 Woodworking machines - Multi-spindle mortising machines
TS EN 12775 Solid wood boards - Classification and terminology
Glass and Ceramic Industry Terms
TS ISO 9802 Glass-Optical glass-Raw-Terms and recipes
TS 2757 ISO 836 Refractory materials-Terms and recipes
TS EN 1748-1-1 Glass - Structures - special basic products - Borosilicate glasses - Part 1-1: Definitions, general physical and mechanical properties
TS EN 1748-2-1 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-1: Definitions, general physical and mechanical properties
TS EN 1748-1-1 Glass - Special basic products for construction - Borosilicate glass - Part 1-1: Definitions and general physical and mechanical properties
TS EN 1748-2-1 Glass - Special basic products used in structures - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties
TS EN 2757 Aviation series - Structural bonding system - Test method - Determination of drying and burning residues of primers
TS EN 1096-1 Glass- Used in buildings- Coated glass- Part 1: Definitions and classification
EN 572-1 Glass - Used in construction - Basic soda lime silicate glass products - Part 1: Definitions, general physical and mechanical properties
TS EN ISO 12543-1 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 1: Description and description of components
TS EN 572-1 + A1 Glass - Structures - Basic soda lime silicate glass products - Part 1: Recipes, general physical and mechanical properties
Rubber and Plastic Industry Terms
TS EN 12481 Adhesive tapes-Terms and recipes
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS ISO 4223-1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
TS ISO 4223-1 / AMD1 Definitions of some terms used in the tire industry - Part 1: Modified pneumatic tires 1
TS EN ISO 472 Plastics-Terms and recipes
TS ISO 4223-1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
TS ISO 4223-1 / AMD1 Definitions of some terms used in the tire industry - Part 1: Pneumatic tires
TS EN ISO 18064 Thermoplastic elastomers - Terms and abbreviations
TS ISO 6472 Rubber compound additives - Abbreviations
TS EN 923 Adhesives - Terms and recipes
TS 8451 Definitions of some terms used in the tire industry - Inflating tires
TS 8571 Vehicle tires-Stuffed tires-Some terms and their English equivalents
TS 8572 Tires, inner tubes - Terms and English translations
TS ISO 8604 Plastics-Pre-impregnated mixtures-Definitions of terms and symbols used in marking
TS EN 12701 Structural adhesives-Storage-Terms and explanations related to shelf-life and storage conditions of structural adhesives and related materials
Paint Industry Terms
TS EN ISO 4617 Paints and varnishes - List of equivalent terms
TS EN ISO 4618 Paints and varnishes - Terms and recipes
tst EN ISO 4618 Paints and varnishes - Terms and recipes
TS ISO 4223-2 Description of some terms used in the tire industry - Part 2: Solid tires
TS EN ISO 4617 Paints and varnishes - List of equivalent terms
TS EN ISO 8130-14 Coating powders - Part 14: Terms and definitions
Building Materials and Structures
TS IEC / EN 60364-2-21 Electrical installation in buildings-Section 2: Definitions-Subsection 21-Guide to general terms
TS EN 12433-2 Doors - Industrial and commercial buildings and garages - Terms and descriptions - Part 2: Door sections
TS EN 303-1 Boilers boilers with forced traction burner - Part 1: Terms and definitions general specifications experiments and marking
TS 5694 EN 12670 Natural stones - Terms and definitions
TS EN 1504-10 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties
TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications
TS EN 1504-2 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 13970 Flexible sheets - For waterproofing - Bituminous sheets controlling water vapor transmission - Definitions and features
TS EN 13969 Flexible boards for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications
TS EN 13970 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications
TS EN 13969 Waterproofing flexible covers - Moisture resistant bituminous schists, including those used for storage on the ground floor - Definitions and characteristics
TS EN 1504-3 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-10 / AC Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 13969 / A1 Waterproofing flexible covers - Moisture resistant bituminous shales, including those used for storage on the ground floor - Definitions and characteristics
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 13969 / A1 Flexible sheets for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications
TS EN 13970 / A1 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications
TS EN 1504-10 / AC Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS ISO 18650-1 Construction machinery and equipment - Cement mixers - Part 1: Terminology and general features
TS ISO 18650-2 Construction machinery and equipment - Cement mixers - Part 2: Method for inspection of the mixture
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 12440 Natural stones - Naming criteria
tkt 201184265 Wood based interior door frame
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers
TS EN 1264-1 Floor heating and cooling systems - Water-based - part 1: Definitions and symbols
TS EN 15241 / AC Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
tst 2017 Modular coordination-Terms
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 303-5 Boilers - Part 5: Solid fuel boilers, manual and automatic loading, rated heat output up to 500 kW - Terms and definitions, requirements, tests and marking
TS EN 14909 Flexible sheets for waterproofing - Plastic and rubber waterproofing sheets - Definitions and features
TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and features
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 13956 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and features
tst IEC 60050-845 International Electrotechnical Glossary-Section 845: Lighting
TS EN 303-5 Boilers-Section 5: Solid fuel boilers with manual and automatic loading, rated heat power up to 500 kw-Terms and recipes, specifications, tests and marking
TS ISO 1791 Building construction - Modular compatibility - Terms
TS EN 14618 Agglomerate stones - Terms and classification
TS EN 12665: 2011 Light and lighting-Basic definitions and criteria for lighting rules
TS EN 13984 Flexible sheets - For waterproofing - Plastic and rubber sheets for water vapor control - Definitions and features
TS ISO 15644 Road construction and maintenance equipment - Chippings spreader - Terminology and commercial properties
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN ISO 6927 Structures and civil engineering works - Joint sealing materials - Glossary
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 607 Rain gutters and fittings-Made of PVC-U-Recipes-Features and tests
TSE K 269 Surface coating impregnated with elastomeric liquid plastic insulation material to polyester, polyamide or similar synthetic carrier fibers
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 14190 Gypsum board products - Recycled material - Definitions, requirements and test methods
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS ISO 1791 Building construction - Modular coordination - Terms
TS EN 14190 Gypsum boards - Recycled - Recipes, requirements and test methods
TS EN 13956 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and characteristics
tst 2015100472 Buildings - Area measurements - Terms
TS ISO 16818 Building environment design - Energy efficiency - Terminology
TS EN 14394 + A1 Boilers - Boilers with forced draft burners - Rated heat output does not exceed 10 MW and has a maximum operating temperature of 110 ºC
TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and features
TS EN 13707 + A2 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications
TS ISO 11375 Construction machinery and equipment - Terms and definitions
TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and descriptions (ISO 9288: 1989)
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS ISO 11375 Construction machinery and equipment - Terms and definitions
TS ISO 18650-1 Building construction machinery and equipment - Concrete mixers - Part 1: Terms and general features
TS EN 303-1 / A1 Boilers - Part 1: Boilers with forced draft burners - Terms and definitions, general requirements, tests and marking
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage
TS EN 16687 Construction products - Evaluation of release of hazardous substances - Terminology
TS EN 14037-1 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºC - Part 1: Ceiling mounted radiant panels ready for ambient heating - Technical specifications and requirements
TS EN 13119 Curtain walls - Terms and recipes
TS EN 1304 Roof tiles and fittings - Made of clay - recipes and features
tst EN 1304 Roof tiles and fittings - Made of clay - recipes and features
TS EN 303-1 / A1 Boilers boilers with forced draft burner - Part 1: Terms and definitions general features experiments and marking
TS EN 520 + A1 Gypsum boards - Definitions, requirements and test methods
TS 734 Definitions of classification and dimensioning of building and space elements
TS EN 932-6 Tests for general properties of aggregates - Part 6: Recipes for repeatability and adaptability
TS EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-1 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 1: Recipes
TS EN 1504-10 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1504-3 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS 2878 ISO 3258 Air distribution and air diffusion - Terms
TS EN 4591 Building lime - Part 1: Definitions, specifications and conformity criteria
tst 4834 Concrete related terms
TS 5228-5 EN 235 Wall coverings - Terms, descriptions and symbols
TS 5695 Building and cladding stones - Sure - Classification
TS 6874 EN ISO 9251 Thermal insulation - Heat transfer conditions and material properties - Terms and definitions
TS 7749 Building construction-Application, measurement and topographic operations-Description of concepts and guiding notes
TS 8024 Reliability of structures - General terms
TS ISO 2444 Joints - Generated in buildings - Terms and recipes
TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and recipes
TS 9876 EN 303-4 Boilers-Section 4: Boilers with forced draft burners-Heat power 70 kw and maximum operating pressure 3 bar (0,3 mpa) boilers with forced draft liquid fuel burners-Terminology, special conditions, tests and markings
TS 12006 Space requirements in public buildings - Terms and definitions
TS EN 12056-1 Attractive drainage systems - Indoor - part 1: General rules and performance rules
TS 12133 Terms and definitions used in electrotechnical lighting
TS EN 12216 Shutters, exterior and interior shutters - Terminology, symbols and recipes
TS EN 12433-1 Doors - Industrial and commercial buildings and garages - Terms and descriptions - Part 1: Door types
TS EN 12440 Natural stones - Naming criteria
TS EN 12792 Ventilation for buildings - Symbols, terminology and graphic symbols
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics
TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications
TS EN 13888 Joint filler for tiles - Requirements, conformity assessment, classification and demonstration
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15900 Energy efficiency services - Terms and rules
Military Engineering Terms
TS 9781 Nbc-Terms and recipes (stanag 2367)
TS 9781 Nbc-Terms and recipes (stanag 2367)
TS 10176 Optical transmission function of imaging systems (used for military purposes) section 1: Definitions and relationships (stanag 4116)
TS 13464 Configuration management - Terms and principles for configuration management
Domestic and commercial equipment, entertainment, sports terms
TS 12724 Exhibitions - Fairs and types - Terms and recipes
TS EN 15898 Protection of cultural property - General main terms and definitions
TSE CEN / TR 15588 Furniture fittings - Terms for hinges and hinge elements
TS ISO 7152 / Amd 1: 2006 Camping tents and caravan awnings - List of terms and equivalent terms
TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage
TS ISO 12756 / Amd.1 Writing and drawing tools - Ball pens and roller pens - Terms - Amendment 1: Viscosity of writing fluid
TSE CEN / TR 16015 Wood furniture lock mechanism
TS EN 131-1 Ladders - Part 1: Terms, descriptions, types, functional dimensions
tst EN 131-1 Ladders - Part 1: Terms, types, functional dimensions
TS EN 1900 Food contact materials - Non-metallic tableware - Terms and recipes
TS 4499 Wood joints - Definitions
TS 4521 Wood furniture - Terms and definitions
TS ISO 6289 Skiing - Terms
TS 6900 Terms used in Turkish music
TS ISO 7152 Camping tents and caravan awnings - List of terms and equivalent terms
TS ISO 8614 Ski fasteners- Terms and recipes
TS EN 12466 Elastic floor coverings - Glossary
TS EN 13248 Cooking appliances - Independent heating coffee machines for household use - Recipes, rules and test methods
TSE CEN / TR 14699 Office furniture - Terms and recipes
TSE CEN / TR 15349 Furniture fittings - Terms for extension elements and fittings