• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Technical Picture Standards

Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards.

 

TS ISO 10110-2 Optical and photonics - Preparation of drawings of optical elements and systems - Part 2: Material defects - Stress double fractures

TS ISO 3272-1 Microfilm drawing of technical drawings and other documents in drawing offices - Part 1: Operations

TS EN ISO 3766 Construction drawings - Simplified representation of concrete reinforcement

TS ISO 3272-3 Microfilm drawing of technical drawings and other documents in drawing offices - Part 3: Aperture card for microfilm 35 mm

TS EN ISO 15785 Technical drawing-Symbols of adhesive, folded and printed joints

TS EN 15016-4 Technical drawing - Railway applications - Part 4. data exchange

TS EN ISO 3098-1 Technical product documentation-Articles-Section 1: General rules

TS 2663 EN 60139 Preparation of external dimension drawings of connections and indicators of cathode ray tube elements

TS EN ISO 5457 / A1 Technical product documentation - Folding and dimensions of drawing sheets "

TS ISO 12756 / Amd.1Writing and drawing tools - Ballpoint pens and roller pens - Terms - Amendment 1: Viscosity of writing fluid

TS EN ISO 7437 Technical drawing- Construction drawings- General rules for drawing prefabricated structural elements manufacturing drawings

TS EN ISO 9222-2 Technical drawing - Seals for dynamic applications - Part 2: Detailed simplified illustration

TS EN 60191-6-21 Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of sketches of packages for surface mounted semiconductor devices -Measuring methods for the dimensions of small draft packages (kta)

TS EN 60191-6-12 Mechanical standardization of semiconductor devices - Part 6-12: General guidelines for the preparation of surface-mounted semiconductor device packages - Design guide for regular spacing grid design (FLGA)

TS EN ISO 8015 Properties of geometric products (gmö) - Principles - Concepts, principles and rules

TS EN ISO 8015 Properties of geometric products (gmö) - Principles - Concepts, principles and rules

TS EN ISO 2553 Welding and related operations - Symbolic representation on drawings - Welded joints

TS EN ISO 6413 Technical drawing - Demonstration of splined shafts and notched gears (triangular splined shaft)

TS EN ISO 3098-6 Technical product documentation - Articles - Section 6: Cyrillic alphabet

TS EN ISO 1101 / AC Geometric product characteristics (GPS) - geometric tolerance - form, orientation, position tolerances and secretion

TS EN ISO 3098-1 Technical product documentation-Articles-Section 1: General rules

TS 1503 EN ISO 1660 Drawing-Dimensioning and tolerancing of profiles

TS EN ISO 7519 Technical drawing- Construction drawings- General principles of demonstration of general arrangement and assembly drawings

TS ISO 9177-1 Mechanical pencils - Part 1 - Classification, dimensions, performance characteristics and tests

TS EN 2206 Aviation series - Steel fe-Pl1502 (25crmo4) - 650 mpa? rm? 850 mpa - Rods - De? 150 mm

TS ISO 9177-2 Mechanical pencils - Part 2 - Black pencil leads - Classification and dimensions

TS ISO 9177-3 Mechanical pencils-Part 3-Black pencil tips-Bending strength of Hb tips

TS ISO 12753-1 Compasses-Section 1: Naming, illustrations and equivalent terms

TS ISO 10110-6 Optical and photonics - Preparing drawings of optical elements and systems - Part 6: Centering tolerances

TS ISO 10110-5 Optical and photonics - Preparing drawings of optical elements and systems - Part 5: Surface shape tolerances

TS ISO 10110-7 Optics and photonics - Preparation of drawings of optical elements and systems - Part 7: Tolerances of surface defects

TS EN ISO 6410-1 Technical drawing-Thread and threaded parts-Part 1: General rules02.02.1999

TS EN ISO 6410-2 Technical drawing - Threaded and threaded parts - Part 2: Inserted threaded spacers

TS EN ISO 6410-3 Technical drawing-Thread and thread and threaded parts-Part 3: Simplified demonstration

TS EN ISO 8826-1 Technical drawing - Rolling bearings - Part 1: General, simplified representation

TS EN ISO 6433 Drawing-Part numbers

TS EN ISO 5456-4 Technical drawing - Marking methods section 4: Central marking

TS 2040 EN ISO 1302Geometric product specifications (gmö) - Display of surface conditions in the technical product documentation

TS EN 4408-001 Aerospace series - Drawings - Display of parts made of composite materials - Part 1: General rules

TS EN 4408-002 Aviation series - Technical drawings - Representation of parts made of composite materials - Part 2: Thin layer parts / note: Applied with En 4408-001

TS EN 4408-003 Aerospace series - Drawings - Display of parts made of composite materials - Part 3: Parts including core materials

TS EN 4408-004 Aerospace series - Drawings - Display of parts made of composite materials - Part 4: Parts obtained by winding

TS EN 4408-005 Aerospace series - Drawings - Display of parts made of composite materials - Part 5: Seam (joints / joints)

TS EN 4408-006 Aerospace series - Drawings - Display of parts made of composite materials - Part 6: Preformations

TS EN ISO 1101 Geometric product specifications (GPS) - geometric tolerance - form, orientation, position tolerances and secretion

TS ISO 10110-1 Optical and photonics -Preparation of optical elements and systems-Part 1: General

TS ISO 10110-3 Optical and photonics -Preparation of optical elements and systems- Material defects-Bubbles and inserts

TS ISO 10110-4 Optical and photonics -Preparation of optical elements and systems-Part 4: Material defects-Non-homogeneity and stratification

TS ISO 10110-2 Optical and photonics -Preparation of optical elements and systems-Part 2: Material defects-Tensile fractures

TS ISO 10110-10 Optical and photonics -Preparation of optical elements and systems-Section 10: Table showing data on optical elements and their stages

TS EN ISO 10135 Geometrical product specifications (GPS) - Drawings for molded parts in the technical product document (TPD)

TS ISO 129-1: 2004 (EN) Drawing - Indication of dimensions and tolerances - Part 1: General principles

TS 13147 Authorized services - Guidelines for computer-aided drawing machines and printers

TS ISO 9177-1 Mechanical pencils - Part 1 - Classification, dimensions, performance characteristics and tests

TS ISO 128-1 Drawing - General principles of demonstration - chapter 1: Introduction and index

TS 88-20 EN ISO 128-20 (Formerly: TS 88-20 ISO 128-20) Technical drawing- General principles of demonstration- Part 20: Basic rules for lines

TS 88-21 EN ISO 128-21 (Formerly: TS 88-21 ISO 128-21) Technical drawing- General principles of demonstration- Section 21: Drawing lines with Cad systems

TS 88-22 ISO 128-22Technical drawing - General principles of demonstration - Part 22: Basic rules and applications for guide lines and reference lines

TS 88-23 ISO 128-23Technical drawing-General principles of demonstration-Section 23: Lines in construction drawing

TS 88-24 ISO 128-24Technical drawing-General principles of demonstration-Section 24: Lines in the machine drawing

TS 88-25 ISO 128-25Technical drawing- General principles of demonstration- Part 25: Lines in shipbuilding technical drawing

TS 88-30 ISO 128-30Technical drawing-General principles of demonstration-Part 30: Basic rules for appearances

TS 88-34 ISO 128-34Technical drawing-General principles of demonstration-Section 34: Views in the machine drawing

TS 88-40 ISO 128-40Technical drawing-General principles of demonstration-Section 40: Basic rules for sections

TS 88-44 ISO 128-44Technical drawing-General principles of demonstration-Section 44: Sections in the machine drawing

TS 88-50 ISO 128-50Technical drawing-General principles of demonstration-Section 50: Basic rules for demonstration of cross-sectional areas

TS 88-20 ISO 128-20: 2000 / T1 (Number modification, TS 88-20 EN ISO 128-20) Technical drawing- General principles of demonstration- Section 20: Basic rules for lines

TS 88-21 ISO 128-21: 2000 / T1 (Number modification, TS 88-21 EN ISO 128-21) Technical drawing- General principles of demonstration- Section 21: Drawing lines with Cad systems

TS ISO 10110-11 Optics and photonics - Preparing drawings of optical elements and systems - Part 11: Data without tolerances

TS ISO 10110-12 Optical and photonics - Preparation of drawings of optical elements and systems - Part 12: Non-spherical surfaces

TS ISO 10110-9 Optical and photonics - Preparation of drawings of optical elements and systems - Part 9: Surface treatment and coating

TS ISO 10110-17 Optical and photonics - Preparing drawings of optical elements and systems - Part 17: Laser irradiation damage threshold

TS 2120 Building application projects

TS EN 2574 Aviation series - Resources - Technical data

TS EN 2851 Aviation series - Marking of non-engine components

TS EN ISO 3098-4 Technical product documentation - Articles - Chapter 4: Diacritic and special signs in the Latin alphabet

tst ISO 3272-5 Microfilm of technical drawings and other documents in drawing offices - Part 5: Test procedures for diazo copying of microfilm images on aperture cards

TS 3532 EN ISO 5455Technical image-Scales

tst 3816 EN ISO 4066Building drawings - Demonstration of bars

TS 4220-1 EN ISO 4157-1 Drawings - Short presentation systems - Part 1: Buildings and partitions

TS 4220-2 EN ISO 4157-2 Construction drawings - Short designation systems - Part 2: Site names and numbers

TS 4220-3 EN ISO 4157-3 Design drawings - Short presentation systems - Part 3: Site identifiers

TS EN 4313 Aviation series - Aluminum alloy al-P6013 - T6 - Sheet and strip - 0 mm <a <5 mm  

TS ISO 10110-1 Optical and photonics -Preparation of optical elements and systems-Part 1: General

TS ISO 10110-3 Optical and photonics -Preparation of optical elements and systems- Material defects-Bubbles and inserts

TS ISO 10110-4 Optical and photonics -Preparation of optical elements and systems-Part 4: Material defects-Non-homogeneity and stratification

TS ISO 10110-2 Optical and photonics -Preparation of optical elements and systems-Part 2: Material defects-Tensile fractures

TS ISO 10110-10 Optical and photonics -Preparation of optical elements and systems-Section 10: Table showing data on optical elements and their stages

TS EN ISO 10135 Geometrical product specifications (GPS) - Drawings for molded parts in the technical product document (TPD)

TS ISO 129-1: 2004 (EN) Drawing - Indication of dimensions and tolerances - Part 1: General principles

TS ISO 9177-1 Mechanical pencils - Part 1 - Classification, dimensions, performance characteristics and tests  

TS ISO 128-1 Drawing - General principles of demonstration - chapter 1: Introduction and index

TS 88-20 EN ISO 128-20 (Formerly: TS 88-20 ISO 128-20) Technical drawing- General principles of demonstration- Part 20: Basic rules for lines

TS 88-21 EN ISO 128-21 (Formerly: TS 88-21 ISO 128-21) Technical drawing- General principles of demonstration- Section 21: Drawing lines with Cad systems

TS 88-22 ISO 128-22Technical drawing - General principles of demonstration - Part 22: Basic rules and applications for guide lines and reference lines

TS 88-23 ISO 128-23 Drawing-General principles of demonstration-Part 23: Lines in construction drawing

TS 88-24 ISO 128-24Technical drawing-General principles of demonstration-Section 24: Lines in the machine drawing

TS 88-25 ISO 128-25Technical drawing- General principles of demonstration- Part 25: Lines in shipbuilding technical drawing

TS 88-30 ISO 128-30Technical drawing-General principles of demonstration-Part 30: Basic rules for appearances

TS 88-34 ISO 128-34Technical drawing-General principles of demonstration-Section 34: Views in the machine drawing

TS 88-40 ISO 128-40Technical drawing-General principles of demonstration-Section 40: Basic rules for sections

TS 88-44 ISO 128-44Technical drawing-General principles of demonstration-Section 44: Sections in the machine drawing

TS 88-50 ISO 128-50Technical drawing-General principles of demonstration-Section 50: Basic rules for demonstration of cross-sectional areas

TS 88-20 ISO 128-20: 2000 / T1 (Number modification, TS 88-20 EN ISO 128-20) Technical drawing- General principles of demonstration- Section 20: Basic rules for lines

TS 88-21 ISO 128-21: 2000 / T1 (Number modification, TS 88-21 EN ISO 128-21) Technical drawing- General principles of demonstration- Section 21: Drawing lines with Cad systems

TS ISO 10110-11 Optics and photonics - Preparing drawings of optical elements and systems - Part 11: Data without tolerances

TS ISO 10110-12 Optical and photonics - Preparation of drawings of optical elements and systems - Part 12: Non-spherical surfaces

TS ISO 10110-9 Optical and photonics - Preparation of drawings of optical elements and systems - Part 9: Surface treatment and coating

TS ISO 10110-17 Optical and photonics - Preparing drawings of optical elements and systems - Part 17: Laser irradiation damage threshold

TS 1882 EN ISO 2203 Technical drawing - Common gears

TS EN 2574 Aviation series - Resources - Technical data

TS EN 2851 Aviation series - Marking of non-engine components

TS EN ISO 3098-4 Technical product documentation - Articles - Chapter 4: Diacritic and special signs in the Latin alphabet

tst ISO 3272-5 Microfilm of technical drawings and other documents in drawing offices - Part 5: Test procedures for diazo copying of microfilm images on aperture cards

TS 3532 EN ISO 5455Technical image-Scales

tst 3816 EN ISO 4066 Drawings - Demonstration of iron bars  

TS 4220-1 EN ISO 4157-1 Drawings - Short presentation systems - Part 1: Buildings and partitions

TS 4220-2 EN ISO 4157-2 Construction drawings - Short designation systems - Part 2: Site names and numbers

TS 4220-3 EN ISO 4157-3 Design drawings - Short presentation systems - Part 3: Site identifiers

TS EN 4313 Aviation series - Aluminum alloy al-P6013 - T6 - Sheet and strip - 0 mm <a <5 mm  

TS EN 4408-001 Aerospace series - Technical drawing - Display of parts made of composite material - Part 1: General rules

TS EN 4408-002 Aviation series - Technical drawing - Display of composite parts - Part 2: Layered parts

TS 4929 EN ISO 5261 (Formerly: TS 4929 ISO 5261) Drawing - Simplified display of bars and profiles

TS 4929 ISO 5261: 1999 / T1 (Number modification, TS 4929 EN ISO 5261) Technical drawing - Simplified display of bars and profiles

TS 5319 Technical Drawing-Scans-Display of cross section and material

TS 5319Technical drawing-Scans-Display of cross section and material

TS EN ISO 5456-1 (Formerly: TS ISO 5456-1) Technical drawing- Marking methods section 1: Overview

TS EN ISO 5456-2 (Formerly: TS ISO 5456-2) Technical drawing- Marking methods section 2: Vertical designations

TS EN ISO 5456-3 (Formerly: TS ISO 5456-3) Technical drawing- Tracing methods section 3: Axonometric representations

TS ISO 5456-3: 1999 / T1 (Number modification, TS EN ISO 5456-3) Technical drawing - Marking methods section 3: Axonometric representations

TS ISO 5456-1: 1999 / T1 (Number modification, TS EN ISO 5456-1) Technical drawing - Marking methods - Part 1: Overview

TS ISO 5456-4: 1999 / T1 (Number modification, TS EN ISO 5456-4) Technical drawing - Marking methods section 4: Central marking

TS ISO 5456-2: 1999 / T1 (Number modification, TS EN ISO 5456-2) Technical drawing - Marking methods section 2: Vertical designations

TS EN ISO 5458 Geometric product specifications (gmo) - Geometric tolerance - Position tolerance

TS EN ISO 5459: 2011 Geometric product specifications (gmö) - Tolerance - References and reference

TSE ISO / TR 5460 Technical drawing-Geometric tolerances, principles, methods and methods of verification of shape, direction, position and rotation tolerances-Guide

TS 5734 ISO 9961 Drawing materials for technical drawings - Natural tracing paper

TS 5792 ISO 9960-2 Drawing tools - with or without partition - Part 3: Angle gauges

TS 5793 ISO 9960-3 Drawing tools- Partition with or without partition 3: Miter

TS EN ISO 5845-1 (Formerly: TS ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS ISO 5845-1: 1999 / T1 (Number modification, TS EN ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS EN ISO 6284 Structure drawings - Display of boundary deviations

TS EN ISO 6411 Technical drawing - Simplified representation of central bores

TS EN ISO 6412-1 Technical drawing - Simplified representation of pipelines - Part 1: General rules and vertical designation

TS EN ISO 6412-2 Technical drawing - Simplified representation of pipelines - Part 2: Isometric projection

TS EN ISO 6412-3 Technical drawing - Simplified representation of pipelines - Part 3: Drainage systems and ventilation terminal connections

TS EN ISO 6414 Technical drawing for glassware

TS EN ISO 6428 (Formerly: TS ISO 6428) Technical drawing-Microcopying rules

TS ISO 6428: 1999 / T1 (Number modification, TS EN ISO 6428) Technical drawing - Micro copying rules

TS EN ISO 7437 Technical drawing - Building drawings - General rules for manufacturing drawings for prefabricated building elements

TS EN ISO 7518 Technical drawing - Structure drawings - Simplified demonstration of demolition and reconstruction

TS EN ISO 8560 Drawing - Construction drawing - Demonstration of modular sizes, lines and area divisions

TS EN ISO 8826-2 Technical drawing- Rolling bearings - Part 2: Detailed simplified representation

TS ISO 9175-1 Pipe inserts - Hand-drawn technical drawing pens with tracery paper - Part 1: Definitions, dimensions, designation and marking

TS EN 4408-001 Aerospace series - Technical drawing - Display of parts made of composite material - Part 1: General rules 

TS EN 4408-002 Aviation series - Technical drawing - Display of composite parts - Part 2: Layered parts

TS 4929 EN ISO 5261 (Formerly: TS 4929 ISO 5261) Drawing - Simplified display of bars and profiles

TS 4929 ISO 5261: 1999 / T1 (Number modification, TS 4929 EN ISO 5261) Technical drawing - Simplified display of bars and profiles

TS 5319 Technical Drawing-Scans-Display of cross section and material

TS 5319 Technical Drawing-Scans-Display of cross section and material

TS EN ISO 5456-1 (Formerly: TS ISO 5456-1) Technical drawing- Marking methods section 1: Overview

TS EN ISO 5456-2 (Formerly: TS ISO 5456-2) Technical drawing- Marking methods section 2: Vertical designations

TS EN ISO 5456-3 (Formerly: TS ISO 5456-3) Technical drawing- Tracing methods section 3: Axonometric representations

TS ISO 5456-3: 1999 / T1 (Number modification, TS EN ISO 5456-3) Technical drawing - Marking methods section 3: Axonometric representations

TS ISO 5456-1: 1999 / T1 (Number modification, TS EN ISO 5456-1) Technical drawing - Marking methods - Part 1: Overview

TS ISO 5456-4: 1999 / T1 (Number modification, TS EN ISO 5456-4) Technical drawing - Marking methods section 4: Central marking

TS ISO 5456-2: 1999 / T1 (Number modification, TS EN ISO 5456-2) Technical drawing - Marking methods section 2: Vertical designations

TS EN ISO 5458 Geometric product specifications (gmo) - Geometric tolerance - Position tolerance

TS EN ISO 5459: 2011Geometric product specifications (gmö) -Tolerance- References and reference

TSE ISO / TR 5460 Technical drawing-Geometric tolerances, principles, methods and methods of verification of shape, direction, position and rotation tolerances-Guide

TS 5734 ISO 9961 Drawing materials for technical drawings - Natural tracing paper

TS 5792 ISO 9960-2 Drawing tools - with or without partition - Part 3: Angle gauges

TS 5793 ISO 9960-3 Drawing tools- Partition with or without partition 3: Miter

S EN ISO 5845-1 (Formerly: TS ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS ISO 5845-1: 1999 / T1 (Number modification, TS EN ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS EN ISO 6284 Structure drawings - Display of boundary deviations

TS EN ISO 6411 Technical drawing - Simplified representation of central bores

TS EN ISO 6412-1 Technical drawing - Simplified representation of pipelines - Part 1: General rules and vertical designation

TS EN ISO 6412-2 Technical drawing - Simplified representation of pipelines - Part 2: Isometric projection

TS EN ISO 6412-3 Technical drawing - Simplified representation of pipelines - Part 3: Drainage systems and ventilation terminal connections

TS EN ISO 6414 Technical drawing for glassware

TS EN ISO 6428 (Formerly: TS ISO 6428) Technical drawing-Microcopying rules

TS ISO 6428: 1999 / T1 (Number modification, TS EN ISO 6428) Technical drawing - Micro copying rules

TS EN ISO 7437 Technical drawing - Building drawings - General rules for manufacturing drawings for prefabricated building elements

TS EN ISO 7518 Technical drawing - Structure drawings - Simplified demonstration of demolition and reconstruction

TS 7568 EN ISO 4172 Technical drawings-Structure application drawings-Assembly drawings of pre-built structures

TS EN ISO 8560 Drawing - Construction drawing - Demonstration of modular sizes, lines and area divisions

TS EN ISO 8826-2 Technical drawing- Rolling bearings - Part 2: Detailed simplified representation

TS ISO 9175-1 Pipe inserts - Hand-drawn technical drawing pens with tracery paper - Part 1: Definitions, dimensions, designation and marking

TS EN 4408-001 Aerospace series - Technical drawing - Display of parts made of composite material - Part 1: General rules

TS EN 4408-002 Aviation series - Technical drawing - Display of composite parts - Part 2: Layered parts

TS 4929 EN ISO 5261 (Formerly: TS 4929 ISO 5261) Drawing - Simplified display of bars and profiles

TS 4929 ISO 5261: 1999 / T1 (Number modification, TS 4929 EN ISO 5261) Technical drawing - Simplified display of bars and profiles

TS 5220 T-Ruler

TS 5319 Technical Drawing-Scans-Display of cross section and material

TS 5319 Technical Drawing-Scans-Display of cross section and material

TS EN ISO 5456-1 (Formerly: TS ISO 5456-1) Technical drawing- Marking methods section 1: Overview

TS EN ISO 5456-2 (Formerly: TS ISO 5456-2) Technical drawing- Marking methods section 2: Vertical designations

TS EN ISO 5456-3 (Formerly: TS ISO 5456-3) Technical drawing- Tracing methods section 3: Axonometric representations

TS ISO 5456-3: 1999 / T1 (Number modification, TS EN ISO 5456-3) Technical drawing - Marking methods section 3: Axonometric representations

TS ISO 5456-1: 1999 / T1 (Number modification, TS EN ISO 5456-1) Technical drawing - Marking methods - Part 1: Overview

TS ISO 5456-4: 1999 / T1 (Number modification, TS EN ISO 5456-4) Technical drawing - Marking methods section 4: Central marking

TS ISO 5456-2: 1999 / T1 (Number modification, TS EN ISO 5456-2) Technical drawing - Marking methods section 2: Vertical designations

TS EN ISO 5458 Geometric product specifications (gmo) - Geometric tolerance - Position tolerance

TS EN ISO 5459: 2011 Geometric product specifications (gmö) - Tolerance - References and reference

TSE ISO / TR 5460 Technical drawing-Geometric tolerances, principles, methods and methods of verification of shape, direction, position and rotation tolerances-Guide

TS 5734 ISO 9961 Drawing materials for technical drawings - Natural tracing paper

TS 5792 ISO 9960-2 Drawing tools - with or without partition - Part 3: Angle gauges

TS 5793 ISO 9960-3 Drawing tools- Partition with or without partition 3: Miter

TS 5828 Rulers for schools

TS EN ISO 5845-1 (Formerly: TS ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS ISO 5845-1: 1999 / T1 (Number modification, TS EN ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS 6164 Drawing and arrangement rules of reinforced concrete projects-General

TS EN ISO 6284 Structure drawings - Display of boundary deviations

TS EN ISO 6411 Technical drawing - Simplified representation of central bores

TS EN ISO 6412-1 Technical drawing - Simplified representation of pipelines - Part 1: General rules and vertical designation

TS EN ISO 6412-2 Technical drawing - Simplified representation of pipelines - Part 2: Isometric projection

TS EN ISO 6412-3 Technical drawing - Simplified representation of pipelines - Part 3: Drainage systems and ventilation terminal connections

TS EN ISO 6414 Technical drawing for glassware

TS EN ISO 6428 (Formerly: TS ISO 6428) Technical drawing-Microcopying rules

TS ISO 6428: 1999 / T1 (Number modification, TS EN ISO 6428) Technical drawing - Micro copying rules

TS EN ISO 7437 Technical drawing - Building drawings - General rules for manufacturing drawings for prefabricated building elements

TS EN ISO 7518 Technical drawing - Structure drawings - Simplified demonstration of demolition and reconstruction

TS 7568 EN ISO 4172 Technical drawings-Structure application drawings-Assembly drawings of pre-built structures

TS EN ISO 8560 Drawing - Construction drawing - Demonstration of modular sizes, lines and area divisions

TS EN ISO 8826-2 Technical drawing- Rolling bearings - Part 2: Detailed simplified representation

TS ISO 9175-1 Pipe inserts - Hand-drawn technical drawing pens with tracery paper - Part 1: Definitions, dimensions, designation and marking

TS EN 4408-001 Aerospace series - Technical drawing - Display of parts made of composite material - Part 1: General rules

 TS EN 4408-001 Aerospace series - Drawings - Display of parts made of composite materials - Part 1: General rules 

TS EN 4408-002 Aviation series - Technical drawings - Representation of parts made of composite materials - Part 2: Thin-layer parts / note: Applied with En 4408-001 

TS EN 4408-003 Aerospace series - Drawings - Display of parts made of composite materials - Part 3: Parts including core materials 

TS EN 4408-004 Aerospace series - Drawings - Display of parts made of composite materials - Part 4: Parts obtained by winding 

TS EN 4408-005 Aerospace series - Drawings - Display of parts made of composite materials - Part 5: Seam (joints / joints) 

TS EN 4408-006 Aerospace series - Drawings - Display of parts made of composite materials - Part 6: Preformations 

TS EN 4313 Aviation series - Aluminum alloy al-P6013 - T6 - Sheet and strip - 0 mm <a <5 mm   

TS EN 4408-001 Aerospace series - Technical drawing - Display of parts made of composite material - Part 1: General rules 

TS EN 4408-002 Aviation series - Technical drawing - Display of composite parts - Part 2: Layered parts 

TS 5602 Woodworking technical drawing 

TS EN 15016-1 Technical drawing - Railway applications - Part 1: General principles 

TS EN 15016-2 Technical drawing-Railway applications - Part 2: Parts lists 

TS EN 15016-3 Technical drawing- Railway applications - Part 3: Modification of technical documents 

TS EN 15016-2 / AC Technical drawing-Railway applications - Part 2: Parts lists 

TS EN 4408-006 Aerospace series - Technical drawing - Display of parts made of composite material - Part 6: Preforms 

TS EN 4408-005 Aerospace series - Technical drawing - Display of parts made of composite material - Part 5: Seams 

TS EN 4408-003 Aerospace series - Technical drawing - Display of parts made of composite material - Part 3: Parts with internal material 

TS EN 4408-004 Aerospace series - Technical drawing - Display of parts made of composite material - Part 4: Wrapped parts