• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Fasteners Standards

We provide professional testing, inspection and certification services in all the following standards. We perform all your transactions by checking and detecting all the situations that the sector needs.

 

TS 10360 EN 28749 Shear strength test of pins and threaded pins

TS EN 28738 washers - for flat tongs - Product quality a

TS EN 28839 Fasteners-Mechanical properties-Bolts, bolts and nuts-Made of non-ferrous material

TS EN 28839 Fasteners-Mechanical properties-Bolts, bolts and nuts-Made of non-ferrous material

TS EN ISO 7721-2 Countersunk flat head bolts section 2:: Phillips screwdriver insertion depth

TS EN 27434 Fixing screw with screwdriver housing, tapered headless

TS EN 27435 Fixing screw with screwdriver housing, long nozzle, headless

TS EN 27436 Fixing screw with screwdriver housing, conical hollow point, headless

TS EN ISO 6410-2 Technical drawing - Threaded and threaded parts - Part 2: Inserted threaded spacers

TS EN ISO 12777-1 Pallet joints - Test methods - Part 1: Determination of flexural strength of pallet nails, other dowel binders and punches

TS EN 1665 Hexagon head bolts-Flanged-Heavy duty series

TS EN 10230-1 Steel wire nails - Part 1: Soft nails for general applications

TS 432-2 EN 27721 Bolts - Part 2: Countersunk head - Head shapes and gauging

TS 2337-5 EN 22339 Pins - Tapered - Unhardened

TS EN ISO 3269 Fasteners - Acceptance inspection

TS EN ISO 7094 Flat washers - very wide series - Product quality c

TS EN 1664 Fasteners - Hex nuts - With metal safety elements - Flanged

TS EN 26157-3 Fasteners - Surface discontinuities - Part 3: Special purpose bolts, screws and studs

TS EN ISO 15973 Blind rivets - Pull-off mandrel and protruding head - Closed end - mm / st

TS EN ISO 12777-2 Test methods for pallet connections - Part 2: Determination of the resistance to retraction and retraction of pallet nails and hooks

TS EN ISO 12777-2 Test methods for pallet connections - Part 2: Determination of the resistance to retraction and retraction of pallet nails and hooks

TS EN 1503-2 Valves - Materials for housings, covers and housings - Part 2: Steels other than those specified in the European standard

TS EN 1503-3 / AC Valves - Materials for housings, covers and housings - Part 3: Cast irons specified in European standards

TS EN ISO 14588 Blind rivets - Terms and definitions

TS EN ISO 14589 Blind rivets- Mechanical test - ISO 14589: 2000

TS EN ISO 15973 Closed and blind flanges with pull-out mandrel and protruding head

TS EN ISO 15974 Blind rivets with pull-off mandrel and countersunk head

TS EN 1515-2 Flanges and connections-Bolting-Part 2: Classification of bolt materials for steel flanges, pn short notation

TS EN 13446 Wood based boards - Determination of the withdrawal capacity of binders

TS EN 13446 Wood-based panels - Determination of the bounce capacity of binders

TS EN 13271 Wood fasteners - Characteristic load carrying capacity and slip modulus for joints using fasteners

TS EN 13411-5 + A1 Terminators for steel wire ropes - Safety - part 5: U-bolt wire rope terminals

TS EN ISO 15975 Closed blind rivets with pull-off mandrel and protruding head - A1 / mm

TS EN ISO 15976 Closed blind rivets with pull-out mandrel and protruding head-St / st

TS EN ISO 15977 Open blind rivets with pull-out mandrel and protruding head - Aia / st

TS EN ISO 15978 Open blind rivets with pull-off mandrel and countersunk head - Aia / st

TS EN ISO 15979 Open blind rivets with pull-out mandrel and protruding head - St / st

TS EN ISO 12777-3 Test methods for pallet connections - Part 3: Determination of the strength of pallet connections

TS EN ISO 12777-3 Test methods for pallet connections - Part 3: Determination of the strength of pallet connections

TS EN ISO 16582 Open blind rivets with pull-out mandrel and protruding head - Cu / st or cu / br or cu / sst

TS EN ISO 16585 Closed blind rivets with pull-out mandrel and protruding head A2 / sst

TS EN 14218 Nuts-Hexagon-Flanged-Fine thread

TS EN ISO 4762 Screws - Cylinder head, hexagon socket

TS EN ISO 10642 Hex head bolts with countersunk head

TS EN ISO 4027 Fixing screws - Hexagon socket, with tapered ends

TS EN ISO 4028 Fixing screws - Hexagon socket, with cylindrical end

TS EN ISO 6157-2 Fasteners - Surface discontinuities - Part 2: Nuts

TS EN ISO 10484 Extension test applied to nuts (ISO 10484: 1977 / note: Substitution of En 493 is considered.)

TS EN ISO 6157-2 Fasteners - Surface discontinuities - Part 2: Nuts

 tst EN ISO 10664 Six-channel recessed bolt head shape feature

TS EN 13411-7 + A1 Terminators for steel wire ropes - Safety - Part 7: Symmetrical wedge socket

TS EN 14218 Hexagon nuts - Flanged - Fine thread

TS EN ISO 7042 Hexagon nuts - Intrinsically safe - All metal, style 2 - Strength class 5, 8, 10 and 12

TS EN ISO 8748 Spring-type flat pins-Spring-loaded, heavy-duty

TS EN ISO 8750 Spring-type flat pins-Spring, standard, service

TS EN ISO 8751 Spring type flat pins - Spring loaded, light duty31.01.2008

TS EN 15152 Railway applications - Windshields for train cabins

TS EN 15152 Railway applications - Windshields for train cabins

TS EN ISO 8748 Pins - Straight - Spring type - Coiled - For heavy duty

TS EN 14566 + A1 Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods

TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules

TS EN 14399-7 Pre-loaded high-strength structural bolting tools - Part 7: Hr system - Countersunk bolt and nut sets / note - Applied in conjunction with En 14399-1 (2005).

TS EN 14399-8 Pre-loaded high-strength structural bolting tools - Part 8: HV system - Hex head bolts and nuts / note - Applied in conjunction with En 14399-1 (2005).

TS EN ISO 898-1 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 1: Bolts, screws and studs of specified strength class - Normal thread and fine pitch thread

TS EN 14545 Wooden structures - Connectors - Requirements

TS EN ISO 10673 Flat washers-for bolts with non-falling washers - Small, normal and wide series - Product quality a19.01.2010

TS EN ISO 3506-1 Fasteners - Corrosion resistant - Stainless steel - Mechanical properties - Part 1: Bolts and studs

TS EN ISO 3506-3 Fasteners - Corrosion-resistant stainless steel - Mechanical properties - Part 3: Fixing bolts and similar fasteners not subjected to tensile stress

TS EN ISO 8752 Spring-type flat pins - Slotted, heavy duty

TS EN ISO 13337 Spring-type flat pins - Slotted, light duty

TS EN 13411-3 + A1 / T1 Terminators for steel wire ropes - Safety - part 3: Clamps and clamp safety

TS EN ISO 4016 Hexagon head bolts - Product quality C

TS 2337-5 EN 22339 / T1 Pins, tapered, not hardened

TS EN ISO 14579 Hexagon recessed bolts - Cylindrical bolts

TS EN ISO 14586 Hexagon countersunk head bolts

TS EN ISO 4014 Hexagon head bolts - Product quality a and b

TS EN ISO 14584 Countersunk hex head bolts

TS EN ISO 7048 Screws, with cone head, with star slot

TS EN ISO 8676 Hexagon head screws - Metric, fine pitch - Product quality A and B

TS EN ISO 4018 Hexagon head screws - Product quality c

TS EN ISO 2702 Heat-treated sheet steel screws - Mechanical properties

TS EN ISO 1483 Screws with countersunk head (oval) and screwdriver

TS EN ISO 7050 Sheet metal screws with countersunk head (flat) head screwdriver

TS EN ISO 7051 Screws with countersunk lentils

TS EN ISO 2009 Countersunk flat head screwdriver groove screws - Product quality A

TS EN ISO 2010 Countersunk head, screwdriver screws - Product quality A

TS EN ISO 7046-1 Type h or type z Phillips head screws with flat countersunk head - Product quality a - section 1: Steel screws of strength class 4.8

TS EN ISO 7046-2 Type h or type z Phillips screwdriver screws with flat countersunk head - Product quality a - Part 2: Steel screws, stainless steel screws and non-ferrous metal screws of strength class 8.8

TS EN 13411-8 Terminators for steel wire ropes - Safety - Part 8: Forging terminals and die forging (pinching)

TS EN ISO 1479 Hexagon head bolts

TS EN ISO 4766 Fixing screws with flat head, screwdriver housing

TS EN ISO 7049 Sheet metal bolts with bevelled head, Phillips screwdriver

TS EN ISO 7050 Countersunk flat head screwdriver bolts

TS EN ISO 7051 Countersunk head bolts with Phillips screwdriver slot

TS EN ISO 7053 Hexagon head washers with self-tapping screws

TS EN ISO 7380-1 Lentil head bolts - Part 1: Hexagon head lentil head bolts

TS EN ISO 7380-2 Lentil head bolts - Part 2: Hexagon head lentil head bolts with rings

TS EN ISO 1207 Lentil head bolts - Product quality a

TS EN ISO 1482 Screws with countersunk head (flat) and screwdriver

TS EN ISO 1580 Bolts - Cylinder head, screwdriver groove - Product quality a

TS EN 15982 Metadata for learning options-Advertising

TS EN ISO 2009 Countersunk flat head screwdriver bolts - Product quality a

TS EN ISO 2010 Lentil head screwdriver grooved bolts - Product quality a

TS EN ISO 7045 Head screws - Type h or type z Phillips screwdriver housing - Product quality a

TS EN ISO 7046-1 Countersunk-flat head (general head style) Phillips screwdriver type h or type z-Product quality a- Part 1: Strength class 4.8 steel bolts

TS EN ISO 7046-2 Countersunk-flat head (general head style) Phillips screwdriver type h or type z-Product quality a- Part 2: Strength class 8.8 steel bolts, stainless steel and non-ferrous metals

TS EN ISO 7047 Countersunk-lentil head bolts (general head style) with type h or type z Phillips screwdriver housing - Product quality a

TS EN ISO 898-2 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 2: Nuts of specified strength class - Normal thread and fine pitch thread

TS EN ISO 14583 Hexagon countersunk bolts - Bolts with iso head (iso 14583: 2001)

TS EN ISO 4753 Fasteners - End shapes of Iso metric external threaded parts

TS EN 14399-10 Pre-loaded high strength structural bolting devices - Part 10: Hrc system - Calibrated preloaded bolt and nut assemblies

TS EN 14399-9: 2009 (EN) Pre-loaded high-strength structural bolting devices - Part 9: Hr or hv system - Direct tension indicators for bolt and nut assemblies

TS EN ISO 4032 Hexagon nuts (style 1) - Product quality A and B

TS EN ISO 1481 Flat head screwdrivers

TS EN ISO 1482 Flat head screwdriver with countersunk head

TS EN ISO 1483 Oval flat head screwdriver with countersunk head

TS EN ISO 898-2 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 2: Nuts of specified strength class - Normal thread and fine pitch thread

TS EN ISO 10683: 2014 Fasteners - Non-electrolytically applied zinc flake coatings

TS EN ISO 21670: 2014 Nuts-Hexagonal-Flanged-Used for welding to pieces

TS EN ISO 4017: 2014 Hexagon head screws - Product quality a and b

TS EN ISO 10683 Fasteners - Non-electrolytically applied zinc flake coatings

TS EN ISO 21670 Fasteners - Hexagon nuts with flanges used for welding

TS EN ISO 4017 Fasteners - Hexagon head screws - Product quality A and B

TS EN ISO 10664 Six-channel countersunk bolt and screw head shape

TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Definitions of words and coatings (ISO 1891-2: 2014)

TS EN ISO 10664 Six-channel countersunk bolt and screw head shape

TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Terms and definitions for coatings

TS ISO 888Colts and studs - Nominal lengths and screw lengths for general purpose bolts

TS ISO 7041 Fasteners-Nuts-Hexagon-Section: 76-Metric with non-metallic safety elements, style 2-Strength class 9 and 12-Product quality a and b

TS ISO 7720 Fasteners-Nuts Hexagon Part: 83-Metric safety all-metal, style 2-Strength class 9-Product quality a and b

TS ISO 888Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths

TS ISO 3800 Screw fasteners - Under axial load - Fatigue tests - Test methods

EN 14592: 2008 + A1: 2012 Wooden structures - Dowel fasteners - Requirements

TS ISO 7041 Self-locking hexagon nuts (with non-metal safety elements) - Style 2 - Strength class 9 and 12

TS ISO 7720 Intrinsically safe all metal hexagon nuts - Style 2 - Strength class 9

TS EN 14592 + A1 Wooden structures - Dowel fasteners - Requirements

TS EN 14399-2 High-strength structural bolting tools with preloading - part 2: Conformity test for preloading

TS EN 14399-3 Pre-loaded high strength structural bolting tools - part 3: Hr system - Hexagon bolts and nuts

TS EN 14399-4 Pre-loaded high strength structural bolting tools - part 4: HV system - Hexagonal bolts and nuts

TS EN 14399-5 Pre-loaded high-strength structural bolting tools - part 5: Flat washers

TS EN 14399-6 Pre-loaded high-strength structural bolting tools - part 6: Chamfered flat washers

TS EN 14399-2 High-strength structural bolting tools with preloading - part 2: Conformity test for preloading

TS EN 14399-3 Pre-loaded high strength structural bolting tools - Part 3: HR system - Hexagon bolts and nuts  

TS EN 14399-4 Pre-loaded high strength structural bolting tools - part 4: HV system - Hexagonal bolts and nuts

TS EN 14399-5 Pre-loaded high-strength structural bolting tools - part 5: Flat washers  

TS EN 14399-6 Pre-loaded high-strength structural bolting tools - part 6: Chamfered flat washers  

TS EN 14399-1 Pre-loaded high strength structural bolting tools - Part 1: General specifications

TS ISO 3800 Screw fasteners - Fatigue test under axial load - Test methods and evaluation of results

TS EN 14399-9 Pre-loaded high strength structural bolting tools - Part 9: Hr or hv system - Direct tension indicators for bolt and nut assemblies

TS EN 14399-10 Pre-loaded high strength structural bolting devices - Part 10: Hrc system - Calibrated preloaded bolt and nut assemblies

TS EN ISO 7040 Fasteners - Hexagon nuts - with non-metal safety elements, style 1, strength class 5, 8 and 10  

TS EN ISO 7719 Hexagon nuts - intrinsically safe - All metal, style1 - Strength class 5, 8 and 10

TS EN ISO 10511 Hex nuts - self-locking, with non-metal fasteners

TS EN ISO 10512 Fasteners - Hexagon nuts - Non-metal safety element, style 1, metric fine thread, strength class 6, 8 and 10

TS EN ISO 10513 Hexagon nuts - intrinsically safe, all metal, style 2 - Metric fine pitch - Strength class 8,10 and strength class 8, 10 and 12

TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules

TS EN ISO 2320 Fasteners - Intrinsically safe steel nuts - Functional specifications

TS EN ISO 4759-3 Fasteners - Tolerances - Part 3: Flat washers for bolts and nuts - Product quality a and c  

TS EN 15048-1 Structural bolting connections without preload - Part 1: General requirements

TS EN 15048-2 Structural bolting connections without preload - Part 2: Conformity tests

TS EN ISO 4759-3 Fasteners - Tolerances - Part 3: Flat washers for bolts and nuts - Product quality a and c

TS EN 15048-1 Structural bolting connections without preload - Part 1: General requirements

TS EN 15048-2 Structural bolting connections without preload - Part 2: Conformity tests

TS 79-21 EN ISO 7089 washers-Section 21: Flat washers-Normal series-Product quality a

TS 79-22 EN ISO 7090 Washers-Section 22: Flat washers-Countersunk-Normal series-Product quality a

TS 79-23 EN ISO 7091 Washers-Section 23: Flat washers-Normal series-Product quality c

TS 79-24 EN ISO 7092 Washers-Part 24: Flat washers-Small series-Product quality a

TS 79-25 EN ISO 7093-1 Washers-Section 25: Flat washers-Large series-Product quality a

TS 79-26 EN ISO 7093-2 Washers-Section 26: Flat washers-Large series-Product quality c

TS ISO 272Connectors-Hexagonal products-Key blade widths

TS EN 409 Timber - Test methods - Determination of bending moment of anchor type fasteners

TS 432-1 EN ISO 1478 Bolts - Sheet metal bolts - Part 1: General

TS ISO 885 General purpose bolts - Metric series - Head radius

TS EN ISO 887 / AC Flat washers - For general purposes used in metric bolts and nuts - General principles

TS EN 912 Wood binders - Properties of wood binders

TS 1026-79 EN 1666 Hexagon nuts - with flange - Metric fine pitch (with non-metal safety element)

TS EN ISO 1234 Copiers-Tongs

TS EN 1515-1 Flanges and connections - Bolting - Selection of bolting

TS EN 1515-1 Flanges and connections - Bolting - Selection of bolting

tst EN 1515-2 Flanges and connections - Bolting - Part 2: Classification of bolt materials for steel flanges, with pn short designation

tst EN 1515-2 Flanges and connections - Bolting - Part 2: Classification of bolt materials for steel flanges, with pn short designation  

TS EN 1515-3 Flanges and connections - Bolted connections - Part 3: Classification of bolt materials for class-defined steel flanges

TS EN 1515-4 Flanges and connections - Bolting - Part 4: Selection of bolting equipment for pressure vessels directive

TS EN 1515-4 Flanges and connections - Bolting - Part 4: Selection of bolting equipment for pressure vessels directive

TS EN 1661 Hexagon nuts with flange

TS EN 1662 Hex head bolts with flange - Small series

TS EN 1662 / AC Hexagon head bolts with flange - Small series

TS 1026-78 EN 1663 Hexagon nuts - with flange - with non-metal safety elements

TS 1026-85 EN 1667 (Formerly: TS EN 1667) Hexagon nuts, with flange, metric fine pitch, with all metal safety elements

TS EN 1667: 2003 / T1 (Number modified, TS 1026-85 EN 1667) Hexagon nuts - Flanged, metric fine pitch - All metal safety elements

TS 2337-1 EN ISO 2338 Pins - Cylindrical - Non-hardened steel and austenitic stainless steel

TS 2337-2 EN ISO 8733 Pins- Cylindrical- Threaded - Unhardened steel or austenitic stainless steel

TS 2337-3 EN ISO 8734 Pins - Cylindrical - Hardened steel or martensitic stainless steel (fixing pins)

TS 2337-4 EN ISO 8735 Pins- Cylindrical- Threaded - Hardened steel or martensitic stainless steel

TS 2337-6 EN 28736 Pins, taper, internal thread - not hardened

TS 2337-7 EN 28737 Pins, non-tapered, non-hardened

TS 2337-9 EN ISO 8739 Pins - Grooved - Grooved along its length

TS 2337-10 EN ISO 8740 Pins - Grooved - Chamfered - Grooved along its length

TS 2337-11 EN ISO 8741 Pins - Grooved - Conical grooved up to half the length

TS 2337-12 EN ISO 8742 Pins - Grooved - Grooved one third of the length

TS 2337-13 EN ISO 8743 Pins - Grooved - Half-length grooved

TS 2337-14 EN ISO 8744 Pins - Grooved - Tapered groove along length

TS 2337-15 EN ISO 8745 Pins - Taper grooved up to half the grooved length

TS 2337-16 EN ISO 8746 Pins - Grooved - Round head

TS 2337-17 EN ISO 8747 Pins - Grooved - Countersunk head

TS EN ISO 2342 Headless screws with screwdriver groove, flat head, partial thread

TS EN ISO 2702: 2011 Heat treated sheet metal bolts - Mechanical properties

TS EN ISO 3269Connectors - Acceptance inspection

TS EN ISO 3269 / T1 Fasteners - Acceptance inspection

TS EN ISO 3506-4 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Self-tapping screws

TS EN ISO 3506-2 Fasteners - Corrosion resistant - Stainless steel - Mechanical properties - Part 2: Nuts

TS 3699 EN ISO 4759-1 Fasteners - Tolerances - Part 1: Bolts, bolts and nuts - Product quality a, b and c

TS 3699 EN ISO 4759-1 Fasteners - Tolerances - Part 1: Bolts, bolts and nuts - Product quality a, b and c

TS EN ISO 4016: 2011 Hexagon head bolts - Product quality c

TS EN ISO 4018: 2011 Hexagon head screws - Product quality c

TS EN ISO 4026 Fixing screws - Hexagon socket, with flat end

TS EN ISO 4029 Fixing screws - Hexagon socket, tapered end

TS ISO 4755 Fasteners - Iso metric undercutting radius for external threads

TS EN ISO 4757 Bolts with Phillips screwdriver holder

TS EN ISO 5845-1 (Formerly: TS ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS ISO 5845-1: 1999 / T1 (Number modification, TS EN ISO 5845-1) Technical drawing - Simplified demonstration of fasteners in assembly section 1: General principles

TS ISO 7085 (Formerly: TS EN ISO 7085) Screws-Metric threaded, threaded and tempered-Mechanical and performance characteristics

TS EN ISO 7085 / T1 (Number modification: TS ISO 7085) Screws-Metric threaded, threaded and tempered-Mechanical and performance characteristics

TS EN ISO 7094 / AC Flat washers - Very wide series - Product quality c

TS EN ISO 8751 Pins - Straight - Spring type - Coiled - For light duty

TS ISO 8992 Fasteners - general characteristics of bolts, screws, studs and nuts

TS ISO 8992 Fasteners - general characteristics of bolts, screws, studs and nuts

TS EN 10230-1 Steel wire nails - Part 1: Casting nails for general applications

TS EN ISO 10484 Nuts expansion test

TS EN ISO 10485 Conical test load test on nuts

TS EN ISO 10510: 2011 Bolts - Self-tapping - Non-fall flat washer

TS EN ISO 10642 Bolts - Part 9: Countersunk head, hexagon socket

TS EN ISO 10644 Bolts - Non-falling flat washers of steel - Hardness class 200 vsd and 300 vsd

TS EN ISO 10666 Bolts - Self-drilling hole and thread - Mechanical and functional properties

TS EN ISO 10669 Flat washers do not fall - Used in combination with self-tapping screws - Normal and wide series - Product quality a

TS EN ISO 10684 Fasteners - Hot-dip galvanized coatings

TS EN ISO 10684 / AC Fasteners - Hot-dip galvanized coatings

TS EN ISO 12474: 2010 Hexagon head bolts - Metric thread

TS EN 12512 Wooden structures-Test methods-Cyclic loading test for joints made with mechanical fasteners

TS EN 13411-1 + A1 Terminators for steel wire ropes - Safety - part 1: ferrules for steel wire rope slings

TS EN 13411-2 + A1 Terminators for steel wire ropes - Safety - part 2: Knitted eyes for wire rope slings

TS EN 13411-3 + A1 Terminators for steel wire ropes - Safety - part 3: Clamps and clamp safety

TS EN 13411-6 + A1 Terminators for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

TS EN 14219 Nuts-Hexagon-Flanged-Metric-Thin thread-Small series

TS EN 14219 / AC Nuts-Hexagon-Flanged-Metric-Thin thread-Small series

TS EN 14399-8 Pre-loaded high strength structural bolting tools - Part 8: HV system - Hexagon lapping bolts and nuts

tst EN 14399-5 / tst AC High-strength structural bolting connections for preloading - Part 5: Flat washers

TS EN 14399-7 Pre-loaded high strength structural bolting tools - part 7: Hr system - Countersunk bolt and nut sets

TS EN ISO 14580: 2011 Six-grooved countersunk bolts-Cut-cone head bolts

TS EN ISO 14585: 2011 Cylinder head bolts with six groove slots

TS EN ISO 14588 Blind rivets - Terms and recipes

TS EN ISO 14589 Blind rivets - Mechanical test

TS EN 14831 Fasteners - Clamping performance - Simplified torque / angle test method

Burial housings for countersunk head bolts with head configuration according to TS EN ISO 15065 Iso 7721

TS EN ISO 15330 Fasteners - Preload test for the detection of hydrogen fragility - Parallel seating method

TS EN ISO 15480 Bolts - self-drilling hole and screw - Hexagon head, with washer

TS EN ISO 15481 Bolts - Self-tapping hole and thread - with Phillips screwdriver housing, dished head

TS EN ISO 15482 Bolts - Self-drilling hole and thread - with Phillips screwdriver housing, countersunk flat head

TS EN ISO 15483 Bolts - Self-drilling hole and thread - Star screwdriver housing, countersunk lentil head

TS EN ISO 15974 Blind rivets with pull-off mandrel and countersunk head

TS EN 15976: 2011 Flexible sheets for waterproofing - Determination of absorbency

TS EN ISO 15980 Open blind rivets with pull-off mandrel and countersunk head-St / st

TS EN ISO 15981 Open blind rivets - Pull-off mandrel and protruding head - Aia / aia

TS EN ISO 15982 Open blind rivets with pull-off mandrel and countersunk head - Aia / aia

TS EN ISO 15983 Open blind rivets with pull-out mandrel and protruding head A2 / a2

TS EN ISO 15984 Open blind rivets with pull-off mandrel and countersunk head A2 / a2

TS EN ISO 16047 Fasteners - Torque clamping performance - Simplified torque / angle test method

TS EN ISO 16048 Passivation of corrosion-resistant stainless steel fasteners

TS EN ISO 16426 Fasteners - Quality assurance system

TS EN ISO 16582 Blind rivets - Open end with pull-out mandrel, inflated head - Cu / st or cu / br or cu / sst

TS EN ISO 16583 Open blind rivets with pull-off mandrel and countersunk head - Cu / st or cu / br or cu / sst

TS EN ISO 16584 Open blind rivets - Pull-off mandrel and protruding head - Nicu / st or nicu / sst

TS EN 20898-7 Mechanical properties of fasteners - Part 7: Torsion test and minimum torques for bolts with nominal diameters 1 mm - 10 mm

TS EN 22340 Pins for headless locking

TS EN 22341 for bolt-head locking

TS EN 22857 Guides - Grinded screw - Tolerance class 4 h - For normal and fine pitch iso metric screws with 8h and 4 g - 6g - Production tolerances in the screw section

TS EN ISO 23429 Grinding of hexagonal bolts

TS EN 24015 Hexagon head bolts Product quality b-Thin body (housing diameter approximately equal to the section circle diameter)

TS EN 26157-1 Fasteners - Surface discontinuities - Part 1: General purpose bolts, screws and studs

TS EN 28839 Mechanical properties of fasteners - Non-ferrous metal - bolts, screws, studs and nuts

TS EN 28839 Mechanical properties of fasteners - Non-ferrous metal - bolts, screws, studs and nuts

TS EN ISO 8765: 2011 Hexagon head bolts - Metric, fine pitch - Product quality a and b