Turkey's leading testing, inspection companies to you as unique accuracy, highly experienced specialists, all of the tests below standard with advanced inspection methods, we provide audit and certification.
TS EN 28738 washers - for flat tongs - Product quality a
TS EN 28839 Fasteners-Mechanical properties-Bolts, bolts and nuts-Made of non-ferrous material
TS EN 28839 Fasteners-Mechanical properties-Bolts, bolts and nuts-Made of non-ferrous material
TS EN 681-1 Elastomeric seals - for water and drainage applications - Material properties - Part 1: Rubber
TS EN ISO 6410-1 Technical drawing-Thread and threaded parts-Part 1: General rules
TS EN ISO 6410-2 Technical drawing - Threaded and threaded parts - Part 2: Inserted threaded spacers
TS 371 ISO 76 Roller bearings - Static load ratings
TS 10843-2 EN ISO 3952-2 Kinematic diagrams - Graphic symbols - Section: 2
TS EN ISO 6413 Technical drawing - Demonstration of splined shafts and notched gears (triangular splined shaft)
TS EN 12530 Swivel castors and castors - Swivel castors and castors for indoor applications
TS 432-2 EN 27721 Bolts - Part 2: Countersunk head - Head shapes and gauging
TS 432-2 EN 27721 Bolts - Part 2: Countersunk head - Head shapes and gauging
TS EN ISO 9222-2 Technical drawing - Seals for dynamic applications - Part 2: Detailed simplified illustration
TS 2337-5 EN 22339 Pins - Tapered - Unhardened
TS EN ISO 7721-2 Countersunk flat head bolts section 2:: Phillips screwdriver insertion depth
TS EN 27434 Fixing screw with screwdriver housing, tapered headless
TS EN 27435 Fixing screw with screwdriver housing, long nozzle, headless
TS EN 27436 Fixing screw with screwdriver housing, conical hollow point, headless
TS EN 1665 Hexagon head bolts-Flanged-Heavy duty series
TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips
TS EN 751-2 Sealing materials - 1 th, 2 th and 3 are used for screw metallic connections in contact with hot gases and hot water - Part 2: Non-hardening gasket compounds
TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds
TS EN 1664 Fasteners - Hex nuts - With metal safety elements - Flanged
TS 10360 EN 28749 Shear strength test of pins and threaded pins
TS EN ISO 14588 Blind rivets - Terms and definitions
TS EN ISO 14589 Blind rivets- Mechanical test - ISO 14589: 2000
TS EN ISO 15973 Closed and blind flanges with pull-out mandrel and protruding head
TS EN ISO 15974 Blind rivets with pull-off mandrel and countersunk head
TS EN ISO 12777-3 Test methods for pallet connections - Part 3: Determination of the strength of pallet connections
TS EN ISO 12777-3 Test methods for pallet connections - Part 3: Determination of the strength of pallet connections
TS EN 13271 Wood fasteners - Characteristic load carrying capacity and slip modulus for joints using fasteners
TS EN ISO 4762 Screws - Cylinder head, hexagon socket
TS EN ISO 6410-3 Technical drawing-Thread and thread and threaded parts-Part 3: Simplified demonstration
TS EN ISO 8826-1 Technical drawing - Rolling bearings - Part 1: General, simplified representation
TS EN ISO 3269 Fasteners - Acceptance inspection
TS EN ISO 7094 Flat washers - very wide series - Product quality c
TS EN ISO 12777-2 Test methods for pallet connections - Part 2: Determination of the resistance to retraction and retraction of pallet nails and hooks
TS EN ISO 12777-2 Test methods for pallet connections - Part 2: Determination of the resistance to retraction and retraction of pallet nails and hooks
TS EN 1515-2 Flanges and connections-Bolting-Part 2: Classification of bolt materials for steel flanges, pn short notation
TS EN ISO 6157-2 Fasteners - Surface discontinuities - Part 2: Nuts
TS EN ISO 10484 Extension test applied to nuts (ISO 10484: 1977 / note: Substitution of En 493 is considered.)
TS ISO 1502 General purpose ISO metric screws - Gauges and gauges TS EN 13446 Wood based panels - Determination of the withdrawal capacity of binders
TS EN ISO 11688-2 Acoustics - Recommended practice for low noise machine and equipment design - Part 2: Introduction to low noise design physics
TS EN 13446 Wood-based panels - Determination of the bounce capacity of binders
TS EN 13411-5 + A1 Terminators for steel wire ropes - Safety - part 5: U-bolt wire rope terminals
TS EN ISO 228-1 Pipe thread - Non-sealing thread - Part 1: Dimensions, tolerances and short notation
TS 10843-4 EN ISO 3952-4 Kinematic diagrams- Graphic symbols- Section: 4
TS EN 12533 Swivel castors and wheels - Swivel castors and castors for applications with speeds from 1,1 m / s (4 km / h) to 4,4 m / s (16 km / h)
TS EN 12756 Mechanical seals - main dimensions- Short designation and material codes
TS EN 14218 Nuts-Hexagon-Flanged-Fine thread
TS EN 14218 Hexagon nuts - Flanged - Fine thread
TS EN ISO 3506-3 Fasteners - Corrosion-resistant stainless steel - Mechanical properties - Part 3: Fixing bolts and similar fasteners not subjected to tensile stress
TS ISO 1122-2 Glossary of gear statements - Part 2: Definitions of worm gear geometry
TS EN ISO 11688-1 Acoustics - Recommended application for the design of machinery and equipment with low noise level - Part 1: Planning
TS ISO 6194-2 Rotary shaft lip seals with elastomeric seals - Part 2: Terms and definitions
TS EN 13411-3 + A1 / T1 Terminators for steel wire ropes - Safety - part 3: Clamps and clamp safety
TS EN 1503-2 Valves - Materials for housings, covers and housings - Part 2: Steels other than those specified in the European standard
TS EN 1503-3 / AC Valves - Materials for housings, covers and housings - Part 3: Cast irons specified in European standards
TS EN ISO 15975 Closed blind rivets with pull-off mandrel and protruding head - A1 / mm
TS EN ISO 15976 Closed blind rivets with pull-out mandrel and protruding head-St / st
TS EN ISO 15977 Open blind rivets with pull-out mandrel and protruding head - Aia / st
TS EN ISO 15978 Open blind rivets with pull-off mandrel and countersunk head - Aia / st
TS EN ISO 15979 Open blind rivets with pull-out mandrel and protruding head - St / st
TS EN 13411-7 + A1 Terminators for steel wire ropes - Safety - Part 7: Symmetrical wedge socket
TS EN ISO 4766 Fixing screws with flat head, screwdriver housing
TS EN ISO 7049 Sheet metal bolts with bevelled head, Phillips screwdriver
TS EN ISO 1482 Screws with countersunk head (flat) and screwdriver
TS EN ISO 1580 Bolts - Cylinder head, screwdriver groove - Product quality a
TS EN 15982 Metadata for learning options-Advertising
TS EN ISO 2009 Countersunk flat head screwdriver bolts - Product quality a
TS EN ISO 2010 Lentil head screwdriver grooved bolts - Product quality a
TS EN ISO 7045 Head screws - Type h or type z Phillips screwdriver housing - Product quality a
TS EN ISO 7046-1 Countersunk-flat head (general head style) Phillips screwdriver type h or type z-Product quality a- Part 1: Strength class 4.8 steel bolts
TS EN ISO 7046-2 Countersunk-flat head (general head style) Phillips screwdriver type h or type z-Product quality a- Part 2: Strength class 8.8 steel bolts, stainless steel and non-ferrous metals
TS EN ISO 16582 Open blind rivets with pull-out mandrel and protruding head - Cu / st or cu / br or cu / sst
TS EN ISO 16585 Closed blind rivets with pull-out mandrel and protruding head A2 / sst
TS EN ISO 6157-2 Fasteners - Surface discontinuities - Part 2: Nuts
TS EN ISO 8748 Spring-type flat pins-Spring-loaded, heavy-duty
TS EN ISO 8750 Spring-type flat pins-Spring, standard, service
TS EN ISO 8751 Spring type flat pins - Spring loaded, light duty
TS EN ISO 11688-1 Acoustics - Recommended practice for the design of machinery and equipment with low noise levels - Part 1: Planning
TS EN ISO 4014 Hexagon head bolts - Product quality a and product quality b
TS EN ISO 26909 Springs - Terms and definitions
TS EN ISO 7042 Hexagon nuts - Intrinsically safe - All metal, style 2 - Strength class 5, 8, 10 and 12
TS EN ISO 8748 Pins - Straight - Spring type - Coiled - For heavy duty
TS EN 14566 + A1 Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods
TS EN ISO 10673 Flat washers - For bolts with non-falling washers - Small, normal and wide series - Product quality a
TS ISO 1925 Mechanical vibration - Balancing - Terms and definitions
TS EN 61124 Reliability tests - Conformity tests for constant error rate and frequency of error
TS EN ISO 4035 Hexagon thin nuts, chamfered (style 0) - Product quality A and B
TS EN ISO 4036 Hexagon thin nuts, without chamfer (style 0) - Product quality B
TS EN ISO 7040 Fasteners - Hexagon nuts - with non-metal safety elements, style 1, strength class 5, 8 and 10
TS EN ISO 7042 Hexagon nuts - intrinsically safe - all-metal, style 2 - Strength class 5,8, 10 and 12
tst EN ISO 10664 Six-channel recessed bolt head shape feature
TS EN 14545 Wooden structures - Connectors - Requirements
TS EN ISO 1481 Flat head screwdrivers
TS EN ISO 1482 Flat head screwdriver with countersunk head
TS EN ISO 1483 Oval flat head screwdriver with countersunk head
TS EN ISO 3506-1 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs
TS EN ISO 3506-3 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Fixing screws and similar fasteners not under tensile stress
TS EN ISO 3506 -4 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Guide screws (self-tapping screws (ISO 3506-4: 2009)
TS EN ISO 4027 Fixing screws - Hexagon socket, with tapered ends
TS EN ISO 4028 Fixing screws - Hexagon socket, with cylindrical end
TS EN 15152 Railway applications - Windshields for train cabins
TS EN 15152 Railway applications - Windshields for train cabins
TS EN ISO 4032 Hexagon nuts (style 1) - Product quality A and B
TS ISO 6279 Plain bearings - Aluminum alloys for solid bearings
TS ISO 1132-2 Roller bearings - Tolerances - Part 2: Principles and methods of measurement and gauging
TS EN ISO 14579 Hexagon recessed bolts - Cylindrical bolts
TS EN ISO 14586 Hexagon countersunk head bolts
TS EN ISO 4014 Hexagon head bolts - Product quality a and b
TS EN ISO 14583 Hexagon countersunk bolts - Bolts with iso head (iso 14583: 2001)
TS EN ISO 4753 Fasteners - End shapes of Iso metric external threaded parts
TS EN ISO 4753 Fasteners - End shapes of Iso metric external threaded parts
TS EN 14399-10 Pre-loaded high strength structural bolting devices - Part 10: Hrc system - Calibrated preloaded bolt and nut assemblies
TS EN ISO 10683 Fasteners - Non-electrolytically applied zinc flake coating
TS EN ISO 21670 Fasteners - Hexagon nuts with flanges used for welding
TS EN ISO 4017 Fasteners - Hexagon head screws - Product quality A and B
TS ISO 7041 Self-locking hexagon nuts (with non-metal safety elements) - Style 2 - Strength class 9 and 12
TS EN ISO 4033 Hexagon thick nuts, style 2 - Product quality A and B
TS EN ISO 4034 Hexagon nuts (style 1) - Product quality C
TS EN ISO 4035 Hexagon thin nuts, chamfered (style 0) - Product quality A and B
TS EN ISO 8673 Hexagonal normal nuts, (style 1) - Metric fine pitch - Product quality A and B
TS EN ISO 8674 Hexagon thick nuts (style 2) - Metric fine pitch - Product quality A and B
TS EN ISO 8675 Hexagon thin nuts, chamfered, (style 0) - Metric fine pitch - Product quality A and B
TS EN 1503-3 Valves - Materials for housings, covers and housings - Part 3: Cast iron bars specified in European standards
TS EN ISO 3506-2 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts
TS ISO 254 Belt drive-Pulleys-Quality, surface condition and balance
TS ISO 5294 Synchronous belt drives - Pulleys
TS ISO 3800 Screw fasteners - Under axial load - Fatigue tests - Test methods
EN 14592: 2008 + A1: 2012 Wooden structures - Dowel fasteners - Requirements
TS ISO 5295 Synchronous (non-slip) belts; Calculation of power capacity and distance of pulley axes
TS EN ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment
TS ISO 3548-1 Plain bearings - Thin-walled half-bearings - with or without flanges - Part 1: Tolerances, design characteristics and test methods
TS ISO 3548-2 Plain bearings - Thin-walled half-bearings - with or without flanges - Part 2: Measuring wall thickness and flange thickness
TS EN ISO 10664 Six-channel countersunk bolt and screw head shape
TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Terms and definitions for coatings
TS ISO 9980 Belt drive-Groove geometry inspection of grooves for v-belts (effective width-based system)
TS ISO 1813 Antistatic endless v-belts - Electrical conductivity - Feature and test method
TS ISO 1206 Roller bearings - Needle roller bearing bearings - Thin and medium series - Dimensions and tolerances
TS ISO 1206 / Amd 1 Roller bearings - Needle roller bearing bearings - Thin and medium series - Dimensions and tolerances
TS ISO 3547-5 Plain bearings - Swivel bushes - Part 1: External diameter control
TS ISO 4378-4 Plain bearings - Terms, descriptions and classification - Part 4: Calculation parameters and symbols
TS ISO 3547-6 Plain bearings - Swivel bushes - Part 2: Internal diameter control
TS ISO 1122-1 / COR 2 Glossary of glossary terms: 1 geometry recipes
TS ISO 12130-2 Plain bearings - Axial plain bearings with hydrodynamic self-aligning shoe in stable conditions - Part 2: Functions for calculating axial plain bearings with self-aligning shoe
TS ISO 12301 Plain bearings - Quality control techniques and inspection of geometric and material quality characteristics
TS ISO 9982 Belt drive-Scalloped v-belts and pulleys for industrial applications-Dimensions- Ph, pj, pk, pl and pm profiles
TS ISO 10317 Roller bearings - Metric tapered roller bearings - Coding system
TS ISO 10317 / Amd 1Bearing bearings-Metric tapered roller bearings-Coding system
TS ISO 3031 Roller bearings - Needle roller bearing bearings - Axial needle roller and cage assemblies, axial rings - Dimensions and tolerances
TS ISO 12241 Metric series bearings Limit dimensions, tolerances and specifications - Part 1: Instrument precision bearings - bearings
TS ISO 10285 Roller bearings - Linear motion, recirculating ball bearing, sleeve bearing type - Metric series
TS ISO 10285 / Amd 1 Roller bearings - Linear motion, recirculating ball bearing, sleeve type bearing - Metric series
TS ISO 4378-5 Plain bearings - Requirements, definitions, classification and symbols - Part 2: Friction and wear
TS ISO 8443 Roller bearings - Radial deep groove ball bearings with outer ring flange - flange dimensions
TS ISO 9628 Roller bearings - Roller bearings with spherical outer surface and eccentric locking rings
TS ISO 9628 / Amd 1 Roller bearings - Roller bearings with spherical outer surface and eccentric locking rings
TS ISO 12044 Roller bearings - Single row, angular contact ball bearings - Rolling dimensions of the non-contact side of the outer ring
TS EN ISO 10642 Hex head bolts with countersunk head
TS EN 50461 Solar cells - Product data and information for crystal silicon solar cells
TS EN 62339-1 Modular component interfaces for surface-mounted liquid distribution components - Part 1: Elastic seals
TS EN ISO 8752 Spring-type flat pins - Slotted, heavy duty
TS EN ISO 13337 Spring-type flat pins - Slotted, light duty
TS EN 62551 Independence analysis techniques - Petri net techniques
TS EN ISO 4034 Hexagonal normal nuts - Product quality C
TS EN ISO 4033 Hexagon nuts, style 2 - Product quality A and B
tst 201496523 Conveyor belts - flame, oil, grease, acid and high temperature resistant Textile woven
TS EN 14399-9 Pre-loaded high strength structural bolting tools - Part 9: Hr or hv system - Direct tension indicators for bolt and nut assemblies
TS EN 14399-10 Pre-loaded high strength structural bolting devices - Part 10: Hrc system - Calibrated preloaded bolt and nut assemblies
TS EN ISO 7040 Fasteners - Hexagon nuts - with non-metal safety elements, style 1, strength class 5, 8 and 10
TS EN ISO 7719 Hexagon nuts - intrinsically safe - All metal, style1 - Strength class 5, 8 and 10
TS EN ISO 10511 Hex nuts - self-locking, with non-metal fasteners
TS EN ISO 7047 Countersunk-lentil head bolts (general head style) with type h or type z Phillips screwdriver housing - Product quality a
TS ISO 888Colts and studs - Nominal lengths and screw lengths for general purpose bolts
TS EN 14399-1 Pre-loaded high strength structural bolting tools - Part 1: General specifications
TS ISO 3548-3 Plain bearings - Thin-walled half-bearings - with or without flanges - Part 3: Measuring circumferential length
TS EN 10226-2 Pipe thread with pressure-tight fittings - Part 2: Tapered external threads and tapered internal threads - Dimensions, tolerances and short designation
TS EN 10226-3 Pipe thread - Pressure sealing with thread - Part 3: Verification via boundary gauges
TS EN 1012-1 Safety rules for compressors and vacuum pumps-Part 1: Compressors
TS EN 10264-4 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
TS ISO 9628 / T1 Roller bearings - Roller bearings with spherical outer surface and eccentric locking rings
tst EN ISO 225 Fasteners - Screws, deflections and nuts - Short designations and symbols
tst EN ISO 225 Fasteners - Screws, deflections and nuts - Short designations and symbols
TS ISO 4384-2 Plain bearings - Hardness test of bearing metals - Part 2: Solid materials
TS ISO 4384-2 Plain bearings - Hardness test of bearing metals - Part 2: Solid materials
TS ISO 888Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths
TS ISO 3228 Roller bearings - Outer surface inner ring and wide ring - Dimensions and tolerances
TS ISO 7148-2 Plain bearings - Determination of friction properties of plastics
TS ISO 7148-1 Plain bearings - Testing of friction behavior of bearing materials - Part 1: Test of bearing metals
TS ISO 21940-21 Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines
TS ISO 3096 Roller bearings-Needle bearings-Dimensions-Metric
TS ISO 3096 / Cor 1 Roller bearings-Needle bearings-Dimensions-Metric
TS ISO 1940-1 Mechanical vibration - Rules for stability quality for rotors in a fixed (rigid) condition - Part 1: Specification and verification of compensation tolerances
TS ISO 6336-1 Calculation of load capacity of axle and helical gears - Part 1: Basic principles, input and general effect factors
TS ISO 6336-2 Calculation of load capacity of roller and helical gears - Part 2: calculation of surface strength (pitting)
TS ISO 6336-3 Calculation of load capacity of axle and helical gears - Part 3: Calculation of tooth flexural strength
TS ISO 6336-5 Calculation of load capacity of traction and helical gears - Part 5: Strength of materials and
TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules
TS EN 14399-7 Pre-loaded high-strength structural bolting tools - Part 7: Hr system - Countersunk bolt and nut sets / note - Applied in conjunction with En 14399-1 (2005).
TS EN 14399-8 Pre-loaded high-strength structural bolting tools - Part 8: HV system - Hex head bolts and nuts / note - Applied in conjunction with En 14399-1 (2005).
TS EN 2206 Aviation series - Steel fe-Pl1502 (25crmo4) - 650 mpa? rm? 850 mpa - Rods - De? 150 mm
TS EN ISO 16047 + A1 Fasteners - Torque clamping performance - Simplified torque / angle test method
TS EN ISO 898-5 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 5: Fixing screws and similar threaded fasteners not subjected to tensile stresses
TS ISO 5753-1 Roller bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings
TS ISO 5753-2 Roller bearings - Internal clearance - Part 2: Axial internal clearance for four-point contact ball bearings
TS EN ISO 898-2 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 2: Nuts of specified strength class - Normal thread and fine pitch thread
TS EN 13906-3 Cylindrical helical springs made of round wire and rod-Calculation and design-Part 3: Pull springs
TS ISO 281 Roller bearings - dynamic load and life ratings
TS ISO 7720 Intrinsically safe all metal hexagon nuts - Style 2 - Strength class 9
TS ISO 5296 Synchronous (non-slip) belt drive systems - Belts
TS ISO 54Gears - Cylindrical gears for general and heavy industrial machinery - Modules
TS ISO 53 Reference rack for cylindrical gears used in general and heavy duty machines
tst ISO 6972 Welded construction, attachments and sprockets crank link mill chains
TS ISO 3228 Roller bearings - cast and pressed housing for bearing elements - Limit dimensions and tolerances
TS ISO 3096 Roller bearings - Needle rollers - Dimensions and tolerances
TS ISO 3096 / Cor 1 Roller bearings-Needle bearings-Dimensions-Metric
TS ISO 5294 Synchronous belt drives - Pulleys
TS ISO 5295 Synchronous (non-slip) belts; Calculation of power capacity and distance of pulley axes
TS ISO 6811 Spherical plain bearings - Terms and descriptions
TS ISO 3548-1 Plain bearings - Thin-walled half-bearings - with or without flanges - Part 1: Tolerances, design characteristics and test methods
TS ISO 3548-2 Plain bearings - Thin-walled half-bearings - with or without flanges - Part 2: Measuring wall thickness and flange thickness
TS ISO 3548-3 Plain bearings - Thin-walled half-bearings - with or without flanges - Part 3: Measuring circumferential length
TS ISO 7-2 Pipe threads with pressure sealing joints in threads - Part 2: Validation via boundary gauges
TS EN 13001-3-2 Cranes - General design - Part 3-2: Verification of boundary conditions and conformity of wire ropes in rope winding systems
TS ISO 68-1 General purpose threads - Basic profile - Part 1: Metric threads
TS ISO 3512 Power transmission elements - Chains and sprockets - Twisted link, for heavy duty
TS EN ISO 4759-3 Fasteners - Tolerances - Part 3: Flat washers for bolts and nuts - Product quality a and c
TS EN 15048-1 Structural bolting connections without preload - Part 1: General requirements
TS EN 15048-2 Structural bolting connections without preload - Part 2: Conformity tests
TS EN ISO 7719 Hexagon nuts - Intrinsically safe - All metal, style 1 - strength class 5, 8 and 10
TS EN ISO 8673 Hexagon nuts - Style 1 - Metric fine pitch - Product quality a and b
TS EN ISO 8674: 2012 Hexagon nuts, style 2 - Metric, fine pitch - Product quality a and b
TS EN ISO 8675 Hexagon thin nuts (chamfered) - Metric, fine pitch - Product quality a and b
TS EN ISO 10511 Hex nuts, self-locking, with non-metal retaining elements
TS EN ISO 10512 Fasteners - Hexagon nuts - Non-metal safety element, style 1, metric fine thread, strength class 6, 8 and 10
TS EN ISO 10513 Hexagon nuts - intrinsically safe, all metal, style 2 - Metric fine pitch - Strength class 8,10 and strength class 8, 10 and 12
TS EN ISO 10642 / A1 Screws - Part 9: Countersunk head, hexagon socket
TS EN ISO 10512 Fasteners - Hexagon nuts - Non-metal safety element, style 1, metric fine thread, strength class 6, 8 and 10
TS EN ISO 10513 Hexagon nuts - intrinsically safe, all metal, style 2 - Metric fine pitch - Strength class 8,10 and strength class 8, 10 and 12
TS EN ISO 7623 Steel braided conveyor belts adhesion test of mesh to coating-Original and after heat treatment
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
TS EN ISO 13918 Welding-Stud deflections for arc welding and ceramic ferrules
TS EN ISO 11381 Ophthalmic optics - Spectacle frames - Screw threads
TS EN 16983 Disc springs - Quality specifications - Dimensions
TS EN ISO 4016 Hexagon head bolts - Product quality C
TS 2337-5 EN 22339 / T1 Pins, tapered, not hardened
TS EN 10264-1 Steel wire and wire products - Steel wire for ropes - Part 1: General specifications
TS EN 62506 Methods for accelerated product testing
TS ISO 5408 Thread - Terms and recipes
TS EN ISO 887 Flat washers - For general purposes used in metric bolts and nuts - General principles
TS ISO 2982-2 Roller bearings - Accessories - Part 2: Puller nuts and locking elements - Dimensions
TS EN 12080 + A1: 2010Rail applications - Axle boxes - Roller bearings
TS EN 15427 + A1: 2010 Rail applications wheel rail friction management-Flange lubrication
TS ISO 3290-1 Roller bearings - Balls - Part 1: Steel Balls
TS ISO 5290 Belt drive - Grooved pulleys - For combined narrow v belts - Groove cross sections 9j, 15j 20j and 25j (active system)
TS ISO 5291 Belt drive - Grooved pulleys - Groove sections for combined classic v belts aj, bj, cj and dj (active system)
TS ISO 8419 Belt drive - Compound narrow v-belts - Lengths in the effective system
TS ISO 9981 Belt drive-Scalloped v-belts and pulleys -For automotive industry-Dimensions-Pk profile
TS ISO 3030 Roller bearings - Needle roller bearing bearings - Needle roller and cage assemblies - Dimensions and tolerances
TS ISO 199Bearing bearings - Thrust ball bearings - Tolerances
TS ISO 4347 Plate chains - Anchor bars and pulleys
TS EN ISO 2320 Fasteners - Intrinsically safe steel nuts - Functional specifications
TS EN 16983 Disc shaped springs - Quality specifications - Dimensions
tst EN 16984 Disc springs - Calculation
TS ISO 13012-1 Roller bearings - Boundary dimensions and tolerances for series 1 and 3: Part 1 - Accessories for sleeve type linear ball bearings
TS ISO 4386-1 Plain bearings - Metallic multi-layer plain bearings - part 1: Non-destructive ultrasonic testing of joints
TS ISO 3547-1 Plain bearings - Swivel bushes - Part 1: Dimensions
TS ISO 3547-2 Plain bearings - Swivel bushes - section 2: Test data for inner and outer diameter
TS ISO 3547-3 Plain bearings - Swivel bushes - Part 3: Lubrication holes, lubrication channels and lubrication notches
TS ISO 3547-4 Plain bearings - Swivel bushes - Part 4: Materials
TS ISO 7146-1 Plain bearings - Causes of damage and appearance changes - Part 1: features
TS ISO 7146-2 Plain bearings - Causes of damage and appearance changes - Part 2: Cavitation erosion and countermeasures
TS ISO 725 ISO inch screws - Basic dimensions
TS EN 61703 Mathematical expression of the terms reliability, availability, maintainability and maintenance support
TS EN 16984 Disc springs - Calculation
TS EN ISO 4759-3 Fasteners - Tolerances - Part 3: Flat washers for bolts and nuts - Product quality a and c
TS EN 15048-1 Structural bolting connections without preload - Part 1: General requirements
TS EN 15048-2 Structural bolting connections without preload - Part 2: Conformity tests
TS EN ISO 7048 Screws, with cone head, with star slot
TS EN ISO 8676 Hexagon head screws - Metric, fine pitch - Product quality A and B
TS ISO 7041 Fasteners-Nuts-Hexagon-Section: 76-Metric with non-metallic safety elements, style 2-Strength class 9 and 12-Product quality a and b
TS ISO 7720 Fasteners-Nuts Hexagon Part: 83-Metric safety all-metal, style 2-Strength class 9-Product quality a and b
TS ISO 5296 Synchronous (non-slip) belt drive systems - Belts
TS ISO 54 Gearwheels - Cylindrical gearwheels for general and heavy industrial machinery - Modules
TS ISO 53 Reference rack for cylindrical gears used in general and heavy duty machines
TS ISO 6972 Power transmission elements - Chains and sprockets - Bushings welded type, twisted link, used in rolling mills
ISO / DIS 3096 Roller bearings-Needle bearings-Dimensions-Metric
TS ISO 2982-2 Roller bearings - Accessories - Part 2: Puller nuts and locking elements - Dimensions
TS ISO 4383 Plain bearings - Multilayer metal materials - For thin-walled plain bearings
TS ISO 6811 Spherical plain bearings - Terms and descriptions
TS ISO 4383 Plain bearings - Multilayer metal materials - For thin-walled plain bearings
TS ISO 7148-2 Plain bearings - Test of friction behavior of bearing materials - Part 2: Test of polymer-based bearing materials
TS ISO 7148-1 Plain bearings - Testing of friction behavior of bearing materials - Part 1: Bearing metals test
tst EN ISO 7623 Steel braided conveyor belts adhesion test of mesh to coating-Original and after heat treatment
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
TS EN ISO 4753 Fasteners - End shapes of ISO metric external threaded parts
TS EN ISO 10683: 2014 Fasteners - Non-electrolytically applied zinc flake coatings
TS EN ISO 21670: 2014 Nuts-Hexagonal-Flanged-Used for welding to pieces
TS EN ISO 4017: 2014 Hexagon head screws - Product quality a and b
tst ISO 254 Belt drive - Pulleys - Quality, surface condition and balance
TS ISO 5290 Belt drive - Grooved pulleys - For combined narrow v belts - Groove cross sections 9j, 15j 20j and 25j (active system)
TS ISO 5291 Belt drive - Grooved pulleys - Groove sections for combined classic v belts aj, bj, cj and dj (active system)
TS ISO 9980 Belt drive - Grooved pulleys for V-belts (effective width-based system) - Geometric inspection of grooves
TS ISO 9981 Belt drive-Scalloped v-belts and pulleys -For automotive industry-Dimensions-Pk profile
TS ISO 9982 Belt drive - Pulleys and scalloped V-belts for industrial applications - PH, PJ, PK, PL and PM profiles: Dimensions
TS ISO 6336-6Calculation of load capacity of spindle and helical gears - Part 6: Calculation of service life under variable load
TS ISO 14104 Gears - Surface temperature etching examination after grinding, chemical method
TS ISO 21771 Gears - Cylindrical involute gears and gear pair - Concepts and geometry
TS ISO 1328-2 Cylindrical gears - ISO accuracy system - Part 2: Definition of deviations and permissible deviations for radial compound deviations and friction information
TS ISO 14635-2 Gears - FZG test procedures - Part 2: FZG stepped load test for the relative scraping load bearing capacity of high EP oils A10 / 16, 6R /
TS ISO 1328-1 Cylindrical gears - Edge tolerance classification ISO system - Part 1: Definitions and permissible values of teeth deviations
TS EN ISO 7050 Countersunk flat head screwdriver bolts
TS EN ISO 7051 Countersunk head bolts with Phillips screwdriver slot
TS EN ISO 7053 Hexagon head washers with self-tapping screws
TS EN ISO 7380-1 Lentil head bolts - Part 1: Hexagon head lentil head bolts
TS EN ISO 7380-2 Lentil head bolts - Part 2: Hexagon head lentil head bolts with rings
TS EN ISO 1207 Lentil head bolts - Product quality a
TS EN ISO 898-2 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 2: Nuts of specified strength class - Normal thread and fine pitch thread
TS EN ISO 898-5 Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 5: Fixing screws and similar threaded fasteners of specified hardness classes - Normal thread and fine pitch thread -
tst ISO 6972 Welded construction, attachments and sprockets crank link mill chains
TS EN ISO 14581 Fasteners - Countersunk flat head bolts with six slots
TS EN ISO 14582 Fasteners - Countersunk bolts with six groove slots, high head
TS EN ISO 898-1 / AC Mechanical properties of fasteners - Made of carbon steel and alloy steel - Part 1: Bolts, screws and studs of specified strength class - Normal thread and fine pitch thread
TS EN 14399-2 High-strength structural bolting tools with preloading - part 2: Conformity test for preloading
TS EN 14399-3 Pre-loaded high strength structural bolting tools - Part 3: HR system - Hexagon bolts and nuts
TS EN 14399-4 Pre-loaded high strength structural bolting tools - part 4: HV system - Hexagonal bolts and nuts
TS EN 14399-5 Pre-loaded high-strength structural bolting tools - part 5: Flat washers
TS EN 14399-6 Pre-loaded high-strength structural bolting tools - part 6: Chamfered flat washers
TS EN 16752 Centrifugal pumps - test procedure for seal packagings
TS EN 13411-8 Terminators for steel wire ropes - Safety - Part 8: Forging terminals and die forging (pinching)
TS EN ISO 1479 Hexagon head bolts
TS ISO 6194-3 Rotary shaft lip seals with elastomeric seals - Part 3: Storage, transport and installation
TS EN 62741 Representation of safety requirements - Safety
TS EN 62550 Spare parts supply
TS EN ISO 4035: 2012 / AC: 2013Hubbed thin nuts, chamfered (style 0) - Product quality A and B
TS EN ISO 7719 / AC Hexagon nuts - Intrinsically safe - All metal, style 1 - strength class 5, 8 and 10
TS EN 13906-2 Cylindrical helical springs - Made of round wire and rod - Calculation and design - Part 2: Elongation springs (extension springs)
TS EN 13906-1 Cylindrical helical springs - Made of round wire and rod - Calculation and design - Part 1: Compression springs (pressure springs)
TS EN ISO 10664 Six-channel countersunk bolt and screw head shape
TS EN ISO 1891-2 Fasteners - Terminology - Part 2: Definitions of words and coatings (ISO 1891-2: 2014)
TS EN 14592 + A1 Wooden structures - Dowel fasteners - Requirements
TS EN 14399-2 High-strength structural bolting tools with preloading - part 2: Conformity test for preloading
TS EN 14399-3 Pre-loaded high strength structural bolting tools - part 3: Hr system - Hexagon bolts and nuts
TS EN 14399-4 Pre-loaded high strength structural bolting tools - part 4: HV system - Hexagonal bolts and nuts
TS EN 14399-5 Pre-loaded high-strength structural bolting tools - part 5: Flat washers
TS EN 14399-6 Pre-loaded high-strength structural bolting tools - part 6: Chamfered flat washers
TS ISO 68-2 ISO general purpose threads - Basic profile - Part 2: Inch threads
TS 79-21 EN ISO 7089 Washers-Section 21: Flat washers-Normal series-Product quality a
TS 79-22 EN ISO 7090 Washers-Section 22: Flat washers-Countersunk-Normal series-Product quality a
TS 79-23 EN ISO 7091 washers-Section 23: Flat washers-Normal series-Product quality c
TS 79-24 EN ISO 7092 Washers-Part 24: Flat washers-Small series-Product quality a
TS 79-25 EN ISO 7093-1 Washers-Section 25: Flat washers-Large series-Product quality a
TS 79-26 EN ISO 7093-2 Washers-Section 26: Flat washers-Large series-Product quality c
TS ISO 965-1 Iso general purpose metric metric thread - Part 1: Principles and basic information
TS ISO 965-2 Iso general purpose metric threads - Part 2: General purpose internal and external threads, size limits for medium quality
TS ISO 965-3 Iso general-purpose metric threads-Tolerams-Part 3: Deviations for tooth construction
TS 61-30 ISO 965-4 Fasteners - Screws - Part 30: ISO metric screws - General purpose - Tolerances - Dimension limits for hot-dip galvanized external screws to ensure compatibility with guided inner screws after galvanizing
TS 61-31 ISO 965-5 ISO metric screws - General purpose - Tolerances - part 5: Dimension limits to ensure compatibility with hot-dip galvanized external screws with the largest dimension of the h tolerance area before galvanizing
TS EN 1515-1 Flanges and connections - Bolting - Selection of bolting
TS EN 1515-1 Flanges and connections - Bolting - Selection of bolting
tst EN 1515-2 Flanges and connections - Bolting - Part 2: Classification of bolt materials for steel flanges, with pn short designation
tst EN 1515-2 Flanges and connections - Bolting - Part 2: Classification of bolt materials for steel flanges, with pn short designation
TS EN 1515-3 Flanges and connections - Bolted connections - Part 3: Classification of bolt materials for class-defined steel flanges
TS EN 1515-4 Flanges and connections - Bolting - Part 4: Selection of bolting equipment for pressure vessels directive
TS EN 1515-4 Flanges and connections - Bolting - Part 4: Selection of bolting equipment for pressure vessels directive
TS 2337-1 EN ISO 2338 Pins - Cylindrical - Non-hardened steel and austenitic stainless steel
TS 2337-2 EN ISO 8733 Pins- Cylindrical- Threaded - Unhardened steel or austenitic stainless steel
TS 2337-3 EN ISO 8734 Pins - Cylindrical - Hardened steel or martensitic stainless steel (fixing pins)
TS 2337-4 EN ISO 8735 Pins- Cylindrical- Threaded - Hardened steel or martensitic stainless steel
TS 2337-6 EN 28736 Pins, taper, internal thread - not hardened
TS 2337-7 EN 28737 Pins, non-tapered, non-hardened
TS 2337-9 EN ISO 8739 Pins - Grooved - Grooved along its length
TS 2337-10 EN ISO 8740 Pins - Grooved - Chamfered - Grooved along its length
TS 2337-11 EN ISO 8741 Pins - Grooved - Conical grooved up to half the length
TS 2337-12 EN ISO 8742 Pins - Grooved - Grooved one third of the length
TS 2337-13 EN ISO 8743 Pins - Grooved - Half-length grooved
TS 2337-14 EN ISO 8744 Pins - Grooved - Tapered groove along length
TS 2337-15 EN ISO 8745 Pins - Taper grooved up to half the grooved length
TS 2337-16 EN ISO 8746 Pins - Grooved - Round head
TS 2337-17 EN ISO 8747 Pins - Grooved - Countersunk head
TS ISO 3245 Roller bearings - Needle roller bearings - Pull ring, without inner ring - Main dimensions and tolerances
TS EN ISO 3269 Fasteners - Acceptance inspection
TS EN ISO 3269 / T1 Fasteners - Acceptance inspection
TS EN ISO 3506-4 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Self-tapping screws
TS EN ISO 3506-2 Fasteners - Corrosion resistant - Stainless steel - Mechanical properties - Part 2: Nuts
Threaded ends for threaded fasteners according to ISO ISO 3508 Iso 261 and ISO 262
TS ISO 4708 Gasket materials - Cork - Test methods
TS ISO 4709 Gasket materials - Cork - Classification system, specifications, sampling, packaging and marking
TS ISO 4755 Fasteners - Iso metric undercutting radius for external threads
TS EN ISO 4757 Bolts with Phillips screwdriver holder
TS EN ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment
TS ISO 7085 (Formerly: TS EN ISO 7085) Screws-Metric threaded, threaded and tempered-Mechanical and performance characteristics
TS ISO 7085 (Formerly: TS EN ISO 7085) Screws-Metric threaded, threaded and tempered-Mechanical and performance characteristics
TS EN ISO 7085 / T1 (Number modification: TS ISO 7085) Screws-Metric threaded, threaded and tempered-Mechanical and performance characteristics
TS EN ISO 7085 / T1 (Number modification: TS ISO 7085) Screws-Metric threaded, threaded and tempered-Mechanical and performance characteristics
tst ISO 7905-1 Plain bearings - Bearing fatigue - Part 1: Plain bearing for applications under hydrodynamic lubrication conditions and for test equipment
tst ISO 7905-2 Plain bearings - Bearing fatigue - Part 2: Test of cylindrical specimens of metal bearing material
tst ISO 7905-3 Plain bearings - Bearing fatigue - Part 3: Test of flat strips of metallic multi-layer bearing material
tst ISO 7905-4 Plain bearings - Bearing fatigue - Part 4: Test of half bearings of metallic multi-layer bearing material
TS ISO 8370-1 Belt drive-Determination of step zone layout-Dynamic test section 1: V-belts
TS ISO 8370-2 Belt drive-Determination of step zone layout-Dynamic test section 2: V-belts with scallops
TS EN ISO 8750 Pins - Straight - Spring type - Coiled - For general service
TS EN ISO 8751 Pins - Straight - Spring type - Coiled - For light duty
TS ISO 8992 Fasteners - general characteristics of bolts, screws, studs and nuts
TS ISO 8992 Fasteners - general characteristics of bolts, screws, studs and nuts
TS ISO 9010 Road vehicles - Motor vehicles - Non-slip (synchronized) - Belts
TS ISO 12130-3 Plain bearings - Axial plain bearings with hydrodynamic self-aligning shoe in stable conditions - Part 3: Guide values for calculating axial plain bearings with self-aligning shoe
TS ISO 12131-1 Plain bearings - Hydrodynamic axial plain bearings with locks in stable conditions - Part 1: Calculation of axial plain bearings
TS ISO 12131-2 Plain bearings - Hydrodynamic axial plain bearings with locks in stable conditions - Part 2: Functions for calculation of plain axial bearings
TS ISO 12131-3 Plain bearings - Hydrodynamic axial plain bearings with locks in stable conditions - Part 3: Guide values for calculation of plain axial bearings
TS ISO 12132 Plain bearings - Quality assurance of thin-walled half bearings - Design fmea
TS ISO 12167-1 Plain bearings - Hydrostatic plain bearings with drainage channel working under stable conditions - part 1: Calculation of oil lubricated plain bearings with drainage channel
TS ISO 12167-2 Plain bearings - Hydrostatic plain bearings with drain channel operating under stable conditions - Part 2: Characteristic values for the calculation of oil lubricated plain bearings with drain channel
TS ISO 12168-1 Plain bearings - Hydrostatic plain bearings without drainage channels operating under stable conditions - Part 1: Calculation of plain lubricated plain bearings without drainage channels
TS ISO 12168-2 Plain bearings - Hydrostatic plain bearings without drainage channel operating under stable conditions section 2: Characteristic values for the calculation of plain bearings with oil lubrication without drainage channel
TS ISO 12240-1 Plain bearings - Spherical- Part 1: With radial spherical plain bearings
TS ISO 12240-2 Plain bearings - Spherical section 2: Radial spherical plain bearings with angular contact
TS ISO 12240-3 Plain bearings - Spherical - Part 3: Axial spherical plain bearings
TS ISO 12240-4 Plain bearings - Spherical- Part 4: Spherical plain bearings with spindle heads
TS EN ISO 12474: 2010 Hexagon head bolts - Metric thread
TS EN 12512 Wooden structures-Test methods-Cyclic loading test for joints made with mechanical fasteners
TS EN 12526 Wheels and swivel castors - Terms and definitions - Correspondence and recommended symbols in various languages
TS EN 12527 Swivel tongs and wheels - Test methods and apparatus
TS EN 12532 Swivel castors and wheels - Swivel castors and wheels for applications up to 1,1 m / s (4 km / h)
TS EN 12756 Mechanical seals - main dimensions, short designation and material codes
TS EN 13298 Railway applications-Shock absorber groups-Steel helical shock absorber springs
TS EN 13411-1 + A1 Terminators for steel wire ropes - Safety - part 1: ferrules for steel wire rope slings
TS EN 13411-2 + A1 Terminators for steel wire ropes - Safety - part 2: Knitted eyes for wire rope slings
TS EN 13411-3 + A1 Terminators for steel wire ropes - Safety - part 3: Clamps and clamp safety
TS EN 13411-6 + A1 Terminators for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
TS EN 13597 Railway applications - Rubber shock absorber systems - Rubber diaphragms for pneumatic shock springs
TS EN ISO 13691 Oil and gas industries - High-speed special purpose gear units
TS EN 14219 Nuts-Hexagon-Flanged-Metric-Thin thread-Small series
TS EN 14219 / AC Nuts-Hexagon-Flanged-Metric-Thin thread-Small series
TS EN 14399-8 Pre-loaded high strength structural bolting tools - Part 8: HV system - Hexagon lapping bolts and nuts
TS EN ISO 14580: 2011 Six-grooved countersunk bolts-Cut-cone head bolts
TS EN ISO 14588 Blind rivets - Terms and recipes
TS EN ISO 14589 Blind rivets - Mechanical test
TS ISO 14635-1 Lubricant tests - Fzg gear test equipment method a / 8,3 / 90 - For lubricating oils
TS ISO 14728-1 Roller bearings - Linear motion roller bearings - part 1: Dynamic load ratings and lifetime value
TS ISO 14728-2 Roller bearings - Linear Motion Roller Bearings - Part 2: Static load ratings
TS EN 14831 Fasteners - Clamping performance - Simplified torque / angle test method
TS EN 14831 Fasteners - Clamping performance - Simplified torque / angle test method
Burial housings for countersunk head bolts with head configuration according to TS EN ISO 15065 Iso 7721
TS ISO 15241 Roller bearings - symbols for sizes
TS ISO 15242-4 Roller bearings-Measuring methods for vibration-Part 4: Radial cylindrical ball bearing bearings with cylindrical bore
TS ISO 15242-1 Roller bearings - Vibration measurement methods - Part 1: Basic information
TS ISO 15242-2 Roller bearings - Vibration measurement methods - Part 2: Radial ball bearings with cylindrical bore and external surface
tst ISO 15242-3Bearing bearings - Measurement methods for vibration - Part 3 cylindrical bore, radial, spherical and tapered roller bearings and outer surfaces
tst ISO 15242-4 Roller bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore
TS ISO 15242-3 Roller bearings - Measurement methods for vibration - Part 3: Radial, spherical and tapered roller bearings with cylindrical bore and outer surfaces
TS ISO 15243 Roller bearings - Damages and defects - Terms, characteristics and causes
TS ISO 15312 Roller bearings - Thermal speed rating - Calculation and coefficients
TS EN ISO 15330 Fasteners - Preload test for the detection of hydrogen fragility - Parallel seating method
TS EN 15427 + A1: 2010Railway applications friction management - Flange lubrication
TS EN ISO 15480 Bolts - self-drilling hole and screw - Hexagon head, with washer
TS EN ISO 15481 Bolts - Self-tapping hole and thread - with Phillips screwdriver housing, dished head
TS EN ISO 15482 Bolts - Self-drilling hole and thread - with Phillips screwdriver housing, countersunk flat head
TS EN ISO 15483 Bolts - Self-drilling hole and thread - Star screwdriver housing, countersunk lentil head
TS EN 15800 Cylindrical helical springs - Made of round wire - Cold wound compression springs (pressure springs) - Quality characteristics
TS EN ISO 15974 Blind rivets with pull-off mandrel and countersunk head
TS EN 15976: 2011 Flexible sheets for waterproofing - Determination of absorbency
TS EN ISO 15980 Open blind rivets with pull-off mandrel and countersunk head-St / st
TS EN ISO 15981 Open blind rivets - Pull-off mandrel and protruding head - Aia / aia
TS EN ISO 15982 Open blind rivets with pull-off mandrel and countersunk head - Aia / aia
TS EN ISO 15983 Open blind rivets with pull-out mandrel and protruding head A2 / a2
TS EN ISO 15984 Open blind rivets with pull-off mandrel and countersunk head A2 / a2
TS EN ISO 16047 Fasteners - Torque clamping performance - Simplified torque / angle test method
TS EN ISO 16048 Passivation of corrosion-resistant stainless steel fasteners
TS EN ISO 16426 Fasteners - Quality assurance system
TS EN ISO 16582 Blind rivets - Open end with pull-out mandrel, inflated head - Cu / st or cu / br or cu / sst
TS EN ISO 16583 Open blind rivets with pull-off mandrel and countersunk head - Cu / st or cu / br or cu / sst
TS EN ISO 16584 Open blind rivets - Pull-off mandrel and protruding head - Nicu / st or nicu / sst