As one of the largest and most experienced organizations in certification with more full-time audit experts than any other certification body in the world, we provide certification services in all standards listed below.
TS EN 733 Pumps centrifugal centrifugal pumps, pn 10, bearing bracket
TS EN 45510-6-4 Power station hardware supply guide - Part 6-4: Turbine aids - Pumps
TS EN ISO 9905 Centrifugal pumps - Technical specifications - Class I
TS EN 12756 Mechanical seals - main dimensions- Short designation and material codes
TS EN 60335-2-41 Safety regulations - for household and similar electrical appliances - part 2-41: Particular requirements for pumps
TS EN ISO 15783 Pumps - Sealed-Rotodynamic-Class II_ specifications
TS EN 60335-2-51 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN ISO 5199 Centrifugal pumps - Technical specifications - Class II
TS EN ISO 13710 Positive displacement pumps for petroleum and petrochemical and natural gas plants
TS EN 60335-2-41 / A1Security rules - For household electrical appliances - Part 2-41: Particular requirements for pumps
TS EN 60335-2-41 / A1 Safety regulations - For household and similar electrical appliances - Part 2-41: Particular requirements for pumps
TS EN ISO 9905 / AC Centrifugal pumps - Technical specifications - Class I
TS EN 60335-2-51 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 14710-1 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 1: Classification, general and safety rules
TS EN 12162 + A1 Liquid pumps - Safety requirements - Hydrostatic test procedure
TS EN 60335-2-41 / A2 Safety regulations - For household and similar electrical appliances - Part 2-41: Particular requirements for pumps
TS EN 1012-2 + A1 Compressors and vacuum pumps - Safety rules - part 2: Vacuum pumps
TS EN 809 + A1 / AC Pumps and pump units - for liquids - General safety rules
TS EN ISO 2858 End suction centrifugal pumps (rated pressure: 16 bar) - short designation, rated operating point and dimensions
TS EN 1012-1 Safety rules for compressors and vacuum pumps-Part 1: Compressors
TS EN ISO 9905 / A1 Centrifugal pumps - Technical specifications - Class I
TS EN ISO 9905 / A1 Centrifugal pumps - Technical specifications - Class I
TS EN ISO 9908 / A1 Centrifugal pumps - Technical specifications - Class III
TS EN 60335-2-51: 2003 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water systems
TS EN 16051-1 Inflatable devices and accessories for inflatable consumer goods - Part 1: Compatibility of valves and valve adapters
TS EN 16051-2 Inflatable devices and accessories for inflatable consumer goods - Part 2: Safety regulations, durability, performance, compatibility and test methods for inflators
TS EN 13951 Liquid pumps - Safety rules - Equipment for agricultural foodstuffs - Design rules for hygiene in practice
TS EN ISO 9906 Rotodynamic pumps - Hydraulic performance acceptance tests - Class 1 and class 2
TS EN ISO 9906 Rotodynamic pumps - Hydraulic performance acceptance tests - Class 1, class 2 and class 3
TS EN 16297-1 Pumps - Centrifugal pumps-Non-salami circulators-Part 1: General requirements and procedures for the testing and calculation of the energy efficiency index (EVİ)
TS EN 16297-2 Pumps - Centrifugal pumps-Non-salami circulators-Part 2: Calculation of energy efficiency index (EVİ) for independent circulators
TS EN 16297-3 Pumps - Centrifugal pumps-Non-sealed circulators-Part 3: Energy efficiency index for integrated circulators (EVİ)
TS EN 60335-2-67 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-67: Particular requirements for commercially used soil tillage and floor cleaning machines
TS EN ISO 17769-1 Liquid pumps and installations - General terms, definitions, sizes, letter symbols and units - Part 1: Liquid pumps
TS EN ISO 17769-2 Liquid pumps and installations - General terms, definitions, sizes, letter symbols and units - Part 1: Pump systems
TS EN 60335-2-51 / A1security rules - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 16297-1 Pumps - Centrifugal pumps - Circulating pumps without shaft seal - Part 1: General rules and procedures for testing and calculating the EEI
TS EN 16297-2 Pumps - Centrifugal pumps - Circulating pumps without shaft seal - Part 2. Calculation of energy efficiency index (EEI) of independent circulation pumps
TS EN 16297-3 Pumps - Centrifugal pumps - Recirculating pumps without packing - Part 3 - Calculation of energy efficiency index (EEI) of circulation pumps integrated in products
TS EN 809 + A1 Pumps and pump units - for liquids - General safety regulations
TS EN 809 + A1 / AC Pumps and pumping units - for liquids - General safety regulations
TS EN 16644 Pumps - Rotodynamic pumps - Non-shaft recirculation pumps with rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code for measuring structural and liquid-induced noise (vibration acoustics)
TS ISO 3069 Centrifugal pumps-End suction-Mechanical type seals and shaft seals-Housing dimensions
TS EN ISO 20361 Liquid pumps and pump units-Noise test code-Accuracy class 2 and accuracy class 3
TS EN ISO 14414 Pump system, energy rating
TS EN 14710-1 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 1: Classification, general and safety rules
TS EN 14710-2 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 2: Verification of general and safety rules
TS EN 16480 Pumps - Minimum required efficiency of rotodynamic water pumps
TS EN 16752 Centrifugal pumps - test procedure for seal packagings
TS EN 16480 Pumps - Minimum required efficiency of rotodynamic water pumps
tst EN ISO 20361 Liquid pumps and pump units-Noise test code-Accuracy class 2 and accuracy class 3
TS EN 734 Pumps - Side channel - Star impeller - Pn 40 rated working conditions, main dimensions, naming system
TS EN 735Pumps-Rotodynamic type-Tolerances on basic dimensions
TS EN 809 + A1 Pumps and pump units - for liquids - General safety rules
tst EN 1151 Pumps - Centrifugal - Used for water circulation in heating and using hot water plants - Up to 200 w - Specifications, tests and marking
TS 1406-1 ISO 1607-1 Vacuum pumps - Positive displacement - Measurement of performance characteristics - Part 1: Measurement of volumetric flow (pumping speed)
TS 1406-2 ISO 1607-2Vacuum pumps - Positive displacement - Measurement of performance characteristics - Part 2: Measurement of final pressure
TS 1407-1 ISO 1608-1 Vacuum pumps - Measurement of performance characteristics for steam - Part 1: Measurement of volumetric flow (pumping speed)
TS 1407-2 ISO 1608-2 Vacuum pumps - Steam - Measurement of performance characteristics - Part 2: Measurement of critical auxiliary pressure
TS ISO 3529-2 Vacuum technology - Terms and definitions - Part 2: Vacuum pumps and related terms
TS EN ISO 5198 Pumps - Centrifugal, mixed flow and axial, code for hydraulic performance tests - Accuracy class
TS EN ISO 9908 Centrifugal pumps - Technical specifications - Class III
TS EN ISO 9908: 1997 / A1: 2011 Centrifugal pumps - Technical specifications - Class III
TS EN 1012-1 Compressors and vacuum pumps - Safety rules - part 1: Air compressors
TS EN 12157 Rotodynamic pumps - Cooling pump units - For machine tools - Nominal flow rate, dimensions
TS EN 12162 + A1 Liquid pumps - Safety requirements - Hydrostatic test procedure
TS EN 12262 Rotodynamic pumps - Technical documents - Terms, delivery range and plan
TS EN 12462 Pumps - Performance criteria for biotechnological pumps
TS EN 12483 Liquid Pumps - Frequency Inverter Pump Units - Warranty and compatibility tests
tst EN 12639 Liquid pumps and pumping units - Noise test code - accuracy class 2 and accuracy class 3
TS EN 12639 / tst AC: 2004 Liquid pumps and pumping units - Noise test code - Accuracy quality 2 and accuracy quality 3
TS EN 12639 / tst AC: 2000 Liquid pumps and pumping units - Noise test code - Accuracy quality 2 and accuracy quality 3
TS EN 14343 Rotary positive displacement pumps - Performance tests for acceptance
TS EN 14343 / AC Rotary positive displacement pumps - Performance tests for acceptance
TS EN 14710-2 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 2: Verification of general and safety rules
TS EN ISO 14847 Rotary pumps with positive displacement specifications
TS EN ISO 15783 / A1 Pumps - Sealed-Rotodynamic-Class II_ specifications
TS EN ISO 16330Piston pumps and pump units - Technical rules
TS EN ISO 21049 Pumps - Shaft sealing systems of centrifugal and rotary pumps
TS EN ISO 3661 (Former no: TS EN 23661) Pumps centrifugal centrifugal pumps with central suction
TS EN 23661 / T1 (Number Modification, TS EN ISO 3661) Pumps with centrifugal centrifugal centrifugal pumps - Base and mounting dimensions
TS EN 45510-5-4 Power plants-Supply guide for equipment-Section 5-4: Water turbines, piston pumps and turbo pumps
TS EN 45510-6-4 Power plants - Supply guide for equipment part 6-4: Turbine auxiliary devices - Pumps
TS EN 60041 Site acceptance tests for the determination of hydraulic performance of hydraulic turbines, storage pumps and turbine-pumps