We carry out all your operations in accordance with the requirements of the experimental conditions and the standards below regarding the necessary regulations.
TS ISO 2016 Capillary brass fittings for copper pipes - Mounting dimensions and tests
TS ISO 9625 Fittings for mechanical connection - For pressure pipes made of polyethylene - Used for irrigation
TS EN 1124-1 Pipes and fittings - Welded, stainless steel - Used in wastewater systems - Plugs with socket and spigot - Part 1: Features, tests and quality control
TS EN 1124-1 / A1 Pipes and fittings - Welded, stainless steel - Used in wastewater systems - Plugs with socket and spigot - Part 1: Features, tests and quality control
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 969 Ductile iron pipes with spheroidal graphite, fittings, fittings and their connections - Properties and test methods for gas pipelines
TS EN 10253-3 Butt welded pipe fittings - Part 3: Formable austenitic and austenitic ferritic (duplex) stainless steels without special inspection requirements.
TS EN 545Ductile cast iron pipes - Pipes, fittings, accessories and fittings used in water lines - Specifications and test methods
TS EN 10253-3 Butt welded pipe fittings - Part 3: Formable austenitic and austenitic-ferritic (duplex) stainless steels without special inspection
TS EN 60534-7 Industrial process control valves - Part 7: Control valve datasheet
TS EN 10242 / A2 Pipe fittings - Cast iron tempered, threaded
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 969 Ductile iron pipes with spheroidal graphite, fittings, fittings and their connections - Properties and test methods for gas pipelines
TS EN 10253-3 Butt welded pipe fittings - Part 3: Formable austenitic and austenitic ferritic (duplex) stainless steels without special inspection requirements.
TS EN 545Ductile cast iron pipes - Pipes, fittings, accessories and fittings used in water lines - Specifications and test methods
TS EN 10253-3 Butt welded pipe fittings - Part 3: Formable austenitic and austenitic-ferritic (duplex) stainless steels without special inspection
TS EN 60534-7 Industrial process control valves - Part 7: Control valve datasheet
TS EN 10242 / A2 Pipe fittings - Cast iron tempered, threaded
TS EN 1254-6 Copper and copper alloys-Pipe fittings-Part 6: Pushfit terminated connections
TS EN 1254-8 Copper and copper alloys-Pipe fittings-Part 8: Pressure end fittings for use with plastics and multilayer pipes
TS EN 12842 Fittings made of artificial iron for PVC-U or PE pipe systems
TSE CEN / TR 16470 Environmental dimension of cast iron pipe systems for water and sewage applications
TS EN 1124-4 Pipes and fittings - Welded, stainless steel - Used in waste water systems - Socketed and spigot pipes - Part 4: Components for vacuum drainage systems and ships' drainage systems
TS EN 14901 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile fittings and accessories (severe conditions) - Specifications and test methods
TS EN 14901 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile iron fittings and accessories (for severe conditions) - Rules and test methods
TS EN 1124-4 Pipes and fittings - Welded, stainless steel - Used in waste water systems - Socketed and spigot tubes - Part 4: Components for vacuum drainage systems and onboard drainage systems
TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions
TS EN 1124-2 Pipes and fittings - Welded, stainless steel - Used in sewage systems - Plugs with socket and spigot - Part 2: System s; Dimensions.
TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.
TS EN 448Central heating pipes - Pre-insulated pipe systems - Directly used in underground hot water networks - Polyurethane heat-insulated, polyethylene outer casing fittings for steel service pipes
TS EN 10253-1 / D1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection
TS 11 EN 10242 Pipe fittings - Cast iron tempered, threaded
TS 11 EN 10242 / T1 Pipe fittings - cast iron tempered, threaded
TS EN 598 + A1 Ductile iron pipes, fittings, accessories and joints - Used in sewage pipelines - Specifications and test methods
TS EN 877 Cast iron pipes and fittings - Joints and accessories for water discharge from buildings - Features, test methods and quality assurance
TS EN 877 / A1 Cast iron pipes and fittings - Used to drain water from buildings - Joints and accessories - Specifications, test methods and quality assurance
TS EN 877 / A1 / AC Cast iron pipes and fittings - Used to drain water from buildings - Joints and accessories - Specifications, test methods and quality assurance
TS 931 EN 10241 Pipe fittings - Steel, screwed
TS EN 1123-1 Pipes and fittings - Welded, hot-dip galvanized - Socketed spigot steel pipes for waste water systems - Part 1: Specifications tests and quality control
TS EN 1123-3 Pipes and fittings - Stitched, hot-dip galvanized - Used in waste water systems - Socketed and spigot steel tubes - Part 3: Particular requirements for sizes and vacuum drainage systems and for drainage systems in shipbuilding.
TS EN 1124-3 Pipes and fittings - Welded, stainless steel - Used in sewage systems - Plugs with socket and spigot - Part 3: System x-Dimensions
TS EN 1254-1 Copper and copper alloys - Pipe fittings - Part 1: Hard or soft soldered fittings to copper pipes
TS EN 1254-2 Copper and copper alloys - Pipe and fittings - Part 2: Crimp end fittings used in copper pipes
TS EN 1254-3 Copper and copper alloys - Pipe fittings - part 3: Crimp fittings used in plastic pipes
TS EN 1254-4 Copper and copper alloys - Pipe fittings - Part 4: Fittings connecting capillary or crimp tips with other connections
TS EN 1254-5 Copper and copper alloys - Pipe fittings - Part 5: Short-end fittings for capillary brazing to copper pipes
TS ISO 2851 Stainless steel elbows and t-for food industry
TS ISO 4144 Piping - Threaded stainless steel fittings according to Iso 7-1
TS ISO 5251 Stainless steel butt welded fittings
TS EN ISO 8434-4 Metallic pipe connections for general use and flowability - Part 4: 0 tapered connections with 24-Ring welded to nipples
TS 9341 EN 10224 Non-alloy steel pipes and fittings for the transport of water and other aqueous fluids - Technical delivery conditions
TS EN 10242 / A1 / AC Pipe fittings - Cast iron tempered, threaded
TS EN 10253-1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection
TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.
TS EN 10253-4 / AC Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.
TS EN 10284 Malleable cast iron fittings for polyethylene (pe) pipe systems with compression ends
TS EN 10288 Steel pipes and fittings for onshore and offshore pipelines - Two-layer extruded polyethylene-based coatings
TS EN 969 ductile cast iron pipes, fittings, fittings and connections - For gas pipelines - Specification and test methods
TS EN 14628 Malleable iron pipes, fittings and accessories - External polyethylene coating for pipes in highly corrosive soils - Requirements and test methods
TS EN 14870-2 Oil and natural industries - Reducing brackets, fittings and flanges for pipeline distribution systems - Part 2: Fittings
TS EN 15655 Ductile iron pipes, fittings and accessories - Internal polyurethane liner for pipes and fittings - Features and test methods
TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions