We provide testing, auditing and certification services for all of the following standards. We are professional and experienced in all operations.
TS 6814 EN ISO 1127 Pipes - Stainless steel - Dimensions, tolerances and unit length masses
TS EN 1124-1 Pipes and fittings - Welded, stainless steel - Used in wastewater systems - Plugs with socket and spigot - Part 1: Features, tests and quality control
TS EN 10217-1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
TS EN 1124-1 / A1 Pipes and fittings - Welded, stainless steel - Used in wastewater systems - Plugs with socket and spigot - Part 1: Features, tests and quality control
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 10217-2 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties
TS EN 10217-1 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
TS EN 10217-1 / A1 Steel tubes - Welded - For pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
TS EN 10298 Steel pipes and fittings - Used in pipelines laid on land and at sea - Internal surface coating with cement mortar
TS EN 969 Ductile iron pipes with spheroidal graphite, fittings, fittings and their connections - Properties and test methods for gas pipelines
TS EN 13941 + A1 Central heating - Design, installation of pre-insulated bonded pipe systems
TS EN 545 ductile cast iron pipes - Pipes, fittings, accessories and joints used in water lines - Specification and test methods
TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welding) steel pipes for verification of hydraulic tightness
TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects
TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects
TS EN ISO 10893-7 Non-destructive testing of steel pipes - Part 7: Digital radiographic examination of weld seam in welded steel pipes for the detection of defects
TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects
TS EN ISO 10893-10 Non-destructive testing of steel pipes - Part 10: Automatic full environmental ultrasonic testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of longitudinal and / or transverse defects
TS EN ISO 10893-11 Non-destructive testing of steel pipes - Part 11: Automatic ultrasonic testing of weld seam in welded steel pipes for the detection of transverse and / or longitudinal defects
tst EN 10208-1 Pipelines for combustible fluids - Steel pipes - Technical delivery conditions - Part 1: Pipes with class A specification
tst EN 10208-2 Pipelines for combustible fluids - Steel pipes - Technical delivery conditions - Part 2: Pipes with class b specification
TS EN 253 + A1 Central heating pipes - Pre-insulated pipe systems - Directly used in underground hot water networks - Polyurethane heat insulated, polyethylene outer casing steel service pipe systems
TSE CEN / TR 16470 Environmental dimension of cast iron pipe systems for water and sewage applications
TS EN 253 + A1 Central heating pipes - Pre-insulated pipe systems - Directly used in underground hot water networks - Polyurethane heat insulated, polyethylene outer casing steel service pipe systems
TS EN 10216-1 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
TS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified high temperature properties
TS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
TS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
TS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
TS EN 10357 Austenitic, austenitic-ferritic and ferritic, longitudinally welded stainless steel tubes for the food and chemical industry
TS EN 1124-4 Pipes and fittings - Welded, stainless steel - Used in waste water systems - Socketed and spigot pipes - Part 4: Components for vacuum drainage systems and ships' drainage systems
TS EN ISO 10893-4 Non-destructive testing of steel pipes - Part 4: Liquid penetrant inspection of seamless and welded steel pipes for the detection of surface defects
TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welded) steel pipes for verification of hydraulic sealing (ISO 10893-1: 2011)
TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Inspection of seamless and welded (excluding submerged arc-welded) steel pipes with automatic eddy currents for the detection of defects (ISO 10893-2: 2011)
TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects
TS ISO 10802 Ductile iron pipelines - Hydrostatic pressure test after laying
TS ISO 10802 Ductile iron pipelines - Hydrostatic pressure test after laying
TS EN 489Central heating pipes - Pre-insulated pipe systems - Connection set for steel service pipes with polyurethane thermal insulation and polyethylene outer casing used in direct underground hot water networks
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene - Part 5: suitability of the system for its purpose
TS EN 1401-1 Plastic pipe systems - For unpressurized, underground drainage and sewage - Made of polyvinylchloride (pvc-U) without plasticizer - Part 1: Pipes, fittings and system features
TS EN 1852-1 Plastic pipe systems - Unpressurized - Used in underground drainage and sewage systems - Polypropylene (pp) - section 1: Pipes, fittings and system features
tst EN 1852-2 Plastic pipe systems - Non-pressurized - Used in underground drainage and sewage systems - Polypropylene (pp) - Section 2: Conformity assessment guide
TS EN ISO 11295 Plastic pipe systems - Used for renovation - classification and design information
TS EN 13942 / AC: 2009 Oil and gas industry - Pipeline transport systems - Line valves
TS EN ISO 14692-4 / tst AC Glass fiber reinforced plastic (ctp) pipe systems - Part used in the oil and gas industry 4: Plant, installation and operation
TS EN ISO 11295 Information on classification and design of plastic pipe systems used for modification
TS EN 13480-3: 2012 (EN) Industrial metallic pipes - Part 3: Design and calculation
tst EN 12201-1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (pe) - Part 1: General
TS EN 12201-5 Plastic pipe systems - For pressurized drinking and potable water, drainage and sewage - Polyethylene (PE) - Part 5: Suitability of the system for its purpose
TSE K 190Ported screwed pipe fittings - Temper cast iron - Used in natural gas installations
TS EN 13480-1: 2012 (EN) Industrial metallic tubes - Part 1: General
TS EN 13480-2: 2012 (EN) Industrial metallic tubes - Part 2: Materials
TS EN 13480-4: 2012 (EN) Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN 13480-5Industrial metallic pipes - Part 5: Inspection and tests
TS EN 13480-6: 2012 (EN) Industrial metallic piping - Part 6: Additional requirements for buried piping
TS EN 13480-8 Industrial piping of metals - Part 8: Additional requirements for aluminum and aluminum alloy piping
TS EN 12007-4 Gas supply systems - Piping - Highest operating pressure up to and including 16 bar - Part 4: Special functional recommendations for renovation
TSE CEN / TS 12666-2 Plastic pipe systems - For unpressurized groundwater and drainage - From polyethylene (pe) - Part 2: Conformity assessment guide
TSE CEN / TS 1555-7 Plastic pipe systems - For the transport of gas fuels - Made of polyethylene (pe) - Part 7: Conformity assessment guide
TS EN 12007-1 Gas supply systems - Piping - Highest operating pressure up to and including 16 bar - Part 1: General recommendations on function
TS EN 1796 Plastic pipe systems - For pressurized or unpressurized water supply - Unsaturated polyester resin (UP) based glass reinforced thermoset plastic (GRP)
TS EN ISO 9311-2 Adhesives - for thermoplastic pipe systems - Part 2: Determination of shear strength
TS EN 805Su supply - Specification for outdoor components and systems
TS EN 15012 Plastic pipe systems - Soil and waste discharge systems in the building - Performance characteristics for pipes, fittings and fittings
TS EN 16348 Gas infrastructure - Safety management system for pipeline operating system for gas transport infrastructure and gas transport pipelines - Functional features
TS EN 1594 Gas supply systems - Pipelines - Maximum operating pressure above 16 bar - Functional specifications
TS EN 13480-2 / A1 Industrial metallic tubes - Part 2: Materials
TS EN 13480-4 / A1 Industrial metallic pipes - Part 4: Manufacturing and installation
TSE CEN / TR 1046 Thermoplastic pipes and sewer systems - Systems used for the transport of ducts and water outside buildings - Applications for underground installation
TSE CEN / TS 14807 Plastic piping systems - Glass fiber reinforced thermoset plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for structural analysis of buried GRP-UP pipelines
TS EN 13480-5 / A1 Industrial metallic tubes - Part 5: Inspection and tests
TS EN ISO 15494 Plastic pipe systems - For industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) based - Properties for systems and components - Metric series
TS EN 1329-1 Plastic pipe systems - Used in underground and indoor waste water (low and high temperature) - Unplasticized polyvinyl chloride (pvc-U) - Part 1: Pipes, fittings and system features
TS EN 16407-1 Non-destructive testing - X-ray and X-rays of corrosion and deposits in pipes - Gamma ray 1: Tangent radiographic examination
TS EN 16407-2 Non-destructive testing - X-ray and X-rays of corrosion and deposits in pipes - Gamma ray 2: Double-deck radiographic examination
TSE CEN / TS 12201-7Plastic pipe systems - For drinking and potable water - Polyethylene (pe) - Part 7: Conformity assessment guide
TSE CEN / TR 16626 Vitrified clay pipe systems for drainage and sewage - Guidance for voluntary third-party certification procedures
TS EN 13480-8 / A1 Industrial piping of metals - Part 8: Additional requirements for aluminum and aluminum alloy piping
TS EN 12007-5 Gas infrastructure - Pipelines - Maximum working pressure up to (including) 16 bar - Part 5: Service lines - Specific functional requirements
TS EN 1594 Gas systems - For pipelines with the highest operating pressure above 16 bar - Functional specifications
TS EN 1329-1 Plastic pipe systems - Used in sewage and waste water (low and high temperature) in buildings - Made of polyvinyl chloride (PVC-U) without plasticizer - Part 1: Pipes, fittings and system features
TSE CEN / TS 12201-7 Plastic pipe systems - For drinking and potable water - Polyethylene (pe) - Part 7: Conformity assessment guide
TS EN 1796 Plastic pipe systems - For pressurized or unpressurized water supply - Unsaturated polyester resin (UP) based glass reinforced thermoset plastic (GRP)
TS EN ISO 9311-2 Adhesives for thermoplastic pipe systems - Part 2: Determination of shear strength
TSE CEN / TS 14632 Plastic pipe systems - pressurized and unpressurized; for drainage, sewage and water applications - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Conformity assessment guide
TS EN 15632-1 + A1 Central heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general specifications and test methods
TS EN 15632-2 + A1 Central heating pipes - Pre-insulated flexible pipe systems - Part 2: Plastic service pipe connection - Specifications and test methods
TS EN 15632-3 + A1 Central heating pipes - Pre-insulated flexible pipe systems - Part 3: Plastic service pipe unconnected pipe systems - Specifications and test methods
TSE CEN / TR 16787 Industrial Gas Installation - Manual
TS EN 13480-4 / A1 Industrial metallic tubes - Part 4: Materials
TS EN 13480-2 / A1 Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN 13480-5 / A1 Industrial metallic tubes - Part 5: Inspection and tests
TS EN 16407-1 Non-destructive testing - X-ray and X-rays of corrosion and deposits in pipes - Gamma ray 1: Tangent radiographic examination
TS EN 16407 -2 Non-destructive testing - X-ray and X-rays of radiations and corrosion with X-ray gamma radiation - Section 2: Double-deck radiographic examination
TS EN 13480-4 / A1 Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN ISO 13845 Plastic pipe systems - Joints made of ring-type elastomeric seal for thermoplastic pressure pipes - Test method for sealing under internal pressure and angular bending
TS EN 16348 Gas infrastructure - Safety management system for pipeline operating system for gas transport infrastructure and gas transport pipelines - Functional features
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TS EN ISO 10931 / A1Plastic pipe systems - For industrial applications - Polyvinylidene fluoride (pvdf) - Components and system properties
tst EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN 1993-4-3 / tst AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 16125 LPG Equipments and Accessories - Pipe systems and supports - LPG in liquid phase and vapor pressure phase
TSE CEN / TR 1295-4 Structural design of buried pipelines under various loading conditions - Part 4: Parameters for design reliability
TSE CEN / TS 1852-2 Plastic pipe systems -Pressurized -Used for underground drainage and sewage systems -Polypropylene (pp) -Chapter 2: Conformity assessment guide
TS EN ISO 15494 Plastic pipe systems - Industrial use - Polybutene (pb), polyethylene (pe), temperature-resistant polyethylene (pe-rt), cross-linked polyethylene (pe-x) and polypropylene (pp) based - System and components - Metric series
TS EN 13480-8 / A2 Industrial piping of metals - Part 8: Additional requirements for aluminum and aluminum alloy piping
TS EN 13480-6 / A1 Industrial metallic piping - Part 6: Additional requirements for buried piping
TSE CEN / TS 14758-2: 2016 Plastic pipe systems - For unpressurized underground sewage and drainage - Polypropylene (pp-Md) containing mineral modifiers - Section 2: Guidance for assessment of conformity
TSE K 522 Filter Coatings for Under-Surface Drainage Pipes
TS EN 13480-2 / A2 Industrial metallic tubes - Part 2: Materials
TS EN 1329-1 / D1 Plastic pipe systems - Used in sewage and waste water (low and high temperature) in buildings - From polyvinyl chloride (PVC-U) with no plasticizer added - Part 1: Pipes, fittings and system features
TS EN 13480-4 / A2 Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN 13480-4 / A3 Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN 1453-1Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 1 - Pipes and system features
TS EN ISO: 15493: 2003 / A1: 2017 Plastic piping systems for industrial use - Acrylonitrile-Butadiene-Styrene (abs), non-plasticizing polyvinylchloride (pvc-U) and chlorinated polyvinylchloride (pvc-C) based systems and components -Metric series
TS EN ISO 15876-1 Plastic pipe systems -Used in hot and cold water systems-Polybutylene (pb) -Chapter 1: General
TS EN 13480-5 / A2 Industrial metallic tubes - Part 5: Inspection and tests
TSE CEN / TS 1453-2 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 2 - Conformity assessment guide
TSE K 85Plastic pipes - Hard polyvinylchloride (pvc-U) - Used in deep wells - Column pipes
TS 274-2 EN 1452-2 / tst T Plastic piping systems for drinking and potable water - Part of polyvinyl chloride (pvc-U) without plasticizer 2: Pipes
TS 274-3 EN 1452-3 / tst T Plastic piping systems for drinking and potable water - Non-plasticizing polyvinyl chloride (pvc-U) - Part 3: Fittings
TS EN 805Su supply - Specification for outdoor components and systems
TS EN 1295-1 Structural design of buried pipelines under different loading conditions - Part 1: General rules
TS EN 1451-1 Plastic pipe systems - Used for disposal of cold and hot wastewater in buildings - Section of polypropylene (pp) 1: Pipes, fittings and system features
TS EN 1451-1 / T1 Plastic pipe systems-Used for disposal of cold and hot wastewater in building-Polypropylene (pp) section 1: Pipes, fittings and system properties
TS EN 1680 Plastic pipe systems - Valves for polyethylene (pe) pipe systems - Tightness test of the operating mechanism of valves during and after bending
TS EN 1993-4-3 / AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS 3990 EN ISO 6708Pipe elements- Description and selection of nominal size (dn)
TS EN ISO 6412-1 Technical drawing - Simplified representation of pipelines - Part 1: General rules and vertical designation
TS EN ISO 6412-2 Technical drawing - Simplified representation of pipelines - Part 2: Isometric projection
TS EN ISO 6412-3 Technical drawing - Simplified representation of pipelines - Part 3: Drainage systems and ventilation terminal connections
TS EN ISO 8434-4 Metallic pipe connections for general use and flowability - Part 4: 0 tapered connections with 24-Ring welded to nipples
TSE 9954-7 CEN ISO / TS 15876-7Plastic piping systems - Used in hot and cold water systems - Polybutylene (pb) - Part 7: Conformity assessment guide
TSE 10762-7 CEN ISO / TS 15875-7 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 7: Conformity assessment guide
TS EN ISO 10931 Plastic pipe systems - For industrial applications - Polyvinylidene fluoride (PVDF) - Components and system properties
TS EN 14419 Central heating pipes - Pre-insulated pipe systems for direct buried hot water network - Monitoring systems
TS EN ISO 14692-1 Glass fiber reinforced plastic (ctp) pipe systems - part used in the oil and gas industry 1: Terms, symbols, applications and materials
TS EN 15001-2 Gas systems - Gas piping for industrial installations larger than 0,5 bar and for industrial and other installations larger than 5 bar - Part 2: Detailed functional specifications for commissioning, operation and maintenance
TS EN 15189 Ductile pipes, fittings and accessories - External polyurethane coating for pipes - Specifications and test methods
TS EN 15266 hose assemblies - for gas - used in buildings - flexible with bend - stainless steel - operating pressure up to 0,5 bar
tst EN ISO 15493 -Plastic pipe systems -Industrial use-Acrylonitrile-Butadiene-Styrene (abs), non-plasticizing polyvinylchloride (pvc-U) and chlorinated polyvinylchloride (pvc-C) based -Features for systems and components -Metric series
tst EN ISO 15494 Plastic piping systems for industrial use - Polybutene (pb), polyethylene (pe) and polypropylene (pp) - Properties for systems and components - Metric series
TS EN 15542 Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
TS EN ISO 22391-5 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 5: Compliance with system purpose
TS EN ISO 22391-2 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 2: Pipes
TS EN ISO 22391-3 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 3: Fittings
TS EN 45510-7-1 Power plants-Supply guide for plants, equipment and systems-Section 7-1: Plumbing and valves-High pressure pipe systems