Our company provides the following standards of controls, meticulously, reliably and quickly test, inspection and certification services, taking into account all the test requirements.
TS EN 12220 Ventilation - for buildings - Ducts - Dimensions of circular flanges for general ventilation
TS EN 13121-1 GRP tanks for surface use - Part 1: Raw materials - Technical requirements and acceptance conditions
tst ISO / TS 13725 Hydraulic fluid power - Cylinders - Method for determination of bending load
TS EN 1455-1 Plastic pipe systems - Used for the disposal of indoor wastewater (hot and cold) - Acrylonitrile - Butadiene - Styrene (abs) - Part 1: Pipes, fittings and system features
TS EN ISO 15783 Pumps - Sealed-Rotodynamic-Class II_ specifications
TS EN ISO 10442 Oil, chemical and gas service industries - Integral geared centrifugal type air compressors in sets
TS ISO 4392-2 Hydraulic fluid power - Determination of the characteristics of the motors Part 2: Mobility
TS ISO 8426 Hydraulic fluid power-Positive displacement pumps and motors- Capacity determination
TS EN 15152 Railway applications - Windshields for train cabins
TS EN 1852-1 Plastic pipe systems - Unpressurized - Used in underground drainage and sewage systems - Polypropylene (pp) - section 1: Pipes, fittings and system features
TS EN ISO 7369 Pipe systems - Metal hoses and hose assemblies - Terms
TS EN ISO 1167-3 Thermoplastic pipes, fittings and fittings -Used for carrying liquids -Interesting resistance to internal pressure -Preparation of components
TS EN ISO 1167-3 Thermoplastic pipes, fittings and fittings -Used for carrying liquids -Interesting resistance to internal pressure -Preparation of components
TS ISO 21029-1 Cryogenic tanks - Portable, vacuum insulated, volume not more than 1000 liters - Part 1: Design, manufacture, inspection and testing
TS EN 14894 Lpg equipment and accessories - Tube and drum marking
TS EN 1227 Plastic pipe systems glass fiber reinforced thermoset plastic (grp) pipes - Long term maximum relative ring deformation under wet conditions
TS EN 45510-7-2 Power station equipment supply guide - Part 7-2: Plumbing and valves - Boiler and high pressure pipe valves
TS ISO 10767-2 Hydraulic fluid power - Determination of pressure, fluctuation levels generated in systems and components - Part 2: Simplified method for pumps
TS ISO 7789 Hydraulic fluid power - Two, three and four outlet screw connection bore valves - Cavities
TS EN ISO 27509Oil and natural gas industries - Compact flange connections with IX sealing ring
TS EN 1329-1 Plastic pipe systems - Used in underground and indoor waste water (low and high temperature) - Unplasticized polyvinyl chloride (pvc-U) - Part 1: Pipes, fittings and system features
TS EN ISO 13844 Plastic pipe systems - Joints with elastomeric sealing ring type pipe heads used with pressure plastic pipes - Test method for sealing under vacuum, angular deflection and deformation
TS EN 13648-2 Cryogenic containers - Safety devices for protection against overpressure - Part 2: Blasting disc safety devices for cryogenic containers
TS EN 60534-2-1 Industrial operating control valves - Part 2: Flow capacity - Part 1: Sizing equations for incompressible fluid flow under established conditions
TS EN 14208 Portable gas cylinders - Specification for welded pressure drums up to 1000 liters for the transport of gases - Design and manufacture
TS EN 13480-1: 2012 (EN) Industrial metallic tubes - Part 1: General
TS ISO 6264 Hydraulic fluid power-Pressure relief valves-Coupling surfaces
TS EN 764-3 Pressurized equipment - Part 3: Description of the parties concerned
TS ISO 6022 Hydraulic fluid power - Mounting dimensions for piston rod cylinders from one side, 25 mpa (250 bar) series
TS EN 14197-2 / A1 Cryogenic tanks - Fixed, vacuum-free insulation - part 2: Design, manufacture, inspection and testing
TS EN 1012-2 + A1 Compressors and vacuum pumps - Safety rules - Part 2: Vacuum pumps
TS EN 1012-2 + A1 Compressors and vacuum pumps - Safety rules - Part 2: Vacuum pumps
TS EN ISO 10893-11 Non-destructive testing of steel pipes - Part 11: Automatic ultrasonic testing of weld seam in welded steel pipes for the detection of transverse and / or longitudinal defects
TS EN 764-3 Pressurized equipment - Part 3: Description of the parties concerned
TS ISO 6022 Hydraulic fluid power - Mounting dimensions for piston rod cylinders from one side, 25 mpa (250 bar) series
TS EN 14197-2 / A1 Cryogenic tanks - Fixed, vacuum-free insulation - part 2: Design, manufacture, inspection and testing
TS EN 1012-2 + A1 Compressors and vacuum pumps - Safety rules - Part 2: Vacuum pumps
TS EN 1012-2 + A1 Compressors and vacuum pumps - Safety rules - Part 2: Vacuum pumps
TS EN ISO 10893-11 Non-destructive testing of steel pipes - Part 11: Automatic ultrasonic testing of weld seam in welded steel pipes for the detection of transverse and / or longitudinal defects
TS EN 13480-5 / A1 Industrial metallic tubes - Part 5: Inspection and tests
TS ISO 10770-1 Hydraulic fluid power - Electrical modulating hydraulic control valves - Part 1: Test methods for four-way directional control valves
TS EN 1092-4 Flanges and connections - Circular flanges for pipes, valves, fittings and accessories - Pn short flare - part 4: Aluminum alloy flanges
TS EN ISO 10893-7 Non-destructive testing of steel pipes - Part 7: Digital radiographic examination of weld seam in welded steel pipes for the detection of defects
TS EN 13445-1 / A1 Pressure receptacles - Non-contact with fire - Part 1: General
TS EN 14276-1 + A1 Pressure equipment for refrigeration systems and heat pumps part 1: Tanks - General specifications
TS EN 1092-4 Flanges and connections-Circular flanges for pipes, valves, fittings and accessories-Pn short designation-Part 4: Aluminum alloy flanges
TS EN ISO 16871 Plastic pipes and ducting systems - Plastic pipes and fittings - Direct (natural) exposure to climatic conditions
TS EN ISO 16871 Plastic pipes and ducting systems - Plastic pipes and fittings - Direct (natural) exposure to climatic conditions
TS EN 14870-3 Oil and gas industry - Pipelines - Hot bent bends, fittings and flanges - Part 3: Flanges
TS EN 13771-2 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
TS 8084 ISO 4065 Thermoplastic pipes-Universal wall thickness chart
TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects
TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects
TS EN ISO 10893-10 Non-destructive testing of steel pipes - Part 10: Automatic full environmental ultrasonic testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of longitudinal and / or transverse defects
TS EN 14197-2 / AC Cryogenic tanks - Stationary, non-vacuum insulated - part 2: Design, manufacture, inspection and testing
TS 11791 ISO 10462 Tubes - for Dissolved acetylene gas - Periodic inspection and maintenance
TS EN 61514-2 Industrial process control systems - Part 2: Methods for evaluating the performance of intelligent valve positioners with pneumatic output
TS EN 16678 Safety and control devices for gas burners and gas burners - Working pressure up to 500 kPa on 6300kPa Including 6300 kPa - Automatic shut-off valves
TS EN 12560-5 Flanges and connections - Seals for flanges with short pressure classes - Part 5: Metallic ring connection seals for use with steel flanges
TS EN 295-2 Pipes-Clay-Glazed-Joints and connecting parts-For wastewater and drainage-Part 2: Quality control and sampling
TS EN 14570 Lpg equipment and accessories-Equipping of aboveground and underground lpg tanks
TS EN 15208 Operating principles and connection characteristics of tanks for the transport of dangerous goods
TS ISO 1219-1 / Amd 1 Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols and data processing applications for conventional use
TS ISO 10770-1 Hydraulic fluid power - Electrical modulating hydraulic control valves - Part 1: Test methods for four-way directional control valves
TS EN 13458-1 Cryogenic containers-Static, vacuum-insulated containers-Part 1: Key features
TS EN 13322-2 / A1 Portable gas cylinders - Refillable welded steel gas cylinders - Design and manufacture - Part 2 stainless steel
TS EN ISO 13477 Thermoplastic pipes - Used for transporting fluids - Determination of resistance to rapid crack propagation (rpc) - Small scale steady state test (s4 test)
TS EN 1251-1 Cryogenic tanks - Portable vacuum-insulated 1000 up to liters section 1: Key features
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 16767 Industrial valves - Steel and cast iron check valves
TS EN 12560-4 Flanges and connections - Seals for flanges with short pressure classes - Part 4: Corrugated, flat or grooved metallic and filled metallic seals for use with steel flanges
TS EN 60335-2-80 Safety regulations - Part for household and similar electrical appliances 2-80: Particular requirements for ventilators
TS EN 15069 Gas safety valves - For metal hose assemblies - For indoor use - For connection of gas appliances
TS EN 1643 Safety and control devices for gas burners and gas burners - Valve verification systems for automatic shut-off valves
TS EN 14382 + A1 / AC Safety devices for gas pressure regulating stations and installations - Safety gas shut-off devices for inlet pressures up to 100 bar
TS ISO 10691 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedures for checking before and after filling
TS EN 561 Gas welding equipment - Quick coupling with shut-off valve for welding, cutting and similar operations
TS EN 802 Plastic pipes and ducting systems-Thermoplastic fittings produced by injection molding-Used in pressure pipe systems-Determination of maximum deformation by compression
TS EN 12560-3 Flanges and connections - Gaskets for flanges with short pressure classes - Part 3: Non-metallic ptfe-wound gaskets
TS EN 764-7 Pressure fitting - Part 7: Safety systems for non-fire pressure fitting
TS EN 15033 Wall-mounted water heaters for storage of hot water using lpg for vehicles and ships (storage water heaters) "
TS EN 13480-5 / A1 Industrial metallic tubes - Part 5: Inspection and tests
TS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
TS EN 14276-2 + A1 Pressure equipment for refrigeration systems and heat pumps part 2: Pipes general rules
TS EN 593 + A1 Industrial valves - Metal butterfly valves
TS EN ISO 9809-3 / T1Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel tubes
TS EN 1555-3: 2010 + A1 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene (pe) - Part 3: Fittings
TS EN ISO 9905 / A1 Centrifugal pumps - Technical specifications - Class I
TS EN 1591-4 Flanges and connections - Part 4: Competence of personal capability in bolted connections of critical service pressure systems
TS EN 13480-2 / A1 Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.
TS EN 1171 Industrial valves - Gate valves - Cast iron
TS EN 448 Central heating pipes - Pre-insulated pipe systems - Directly used in underground hot water networks - Polyurethane heat-insulated, insert fittings for steel service pipes with polyethylene outer casing
TS EN 12201-2 + A1 Plastic pipe systems - For pressurized drinking and potable water, drainage and sewage - polyethylene (PE) - Part 2: Pipes
TS EN 13480-4 / A1 Industrial metallic pipes - Part 4: Manufacturing and installation
TS EN 1594 Gas supply systems - Pipelines - Maximum operating pressure above 16 bar - Functional specifications
TS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
TS EN 14382 + A1 Safety devices for gas pressure regulating stations and installations - Safety gas shut-off devices for inlet pressures up to 100 bar
TS EN 15001-1 Gas systems - Operating pressure for industrial installations larger than 0,5 bar and operating pressure for industrial and non-industrial installations larger than 5 bar - Part 1 - Design, material, construction, inspection and testing detailed functional requirements
TS EN 705Plastic pipe systems-Glass fiber reinforced thermoset plastic (grp) pipes and fittings-Regression analysis methods and application
TS EN 705 Plastic pipe systems-Glass fiber reinforced thermoset plastic (grp) pipes and fittings-Regression analysis methods and application
tst EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
TS EN ISO 3994 Plastic hoses - Thermoplastic hoses reinforced in helical form by means of thermoplastic material, used for suction and discharge of aqueous materials - Specification
TS EN 10216-1 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
TS EN ISO 16135 Industrial valves - Ball valves - Thermoplastic material
TS EN ISO 9974-2 Fasteners - for general purpose and fluid power - Threaded, elastomer-sealed or metal-tight connections and connectors according to ISO 261-Section 2: Flanges with elastomer seal (type e)
TS EN 12734 Irrigation techniques - Quick connection pipes for mobile irrigation systems - Technical characteristics and testing
TS EN ISO 12863 / AC Standard test method for the determination of the ignition propensity of cigarettes
TS EN 15280 Assessment of the possibility of AC corrosion of buried pipelines applicable to cathodic protected pipelines
TS EN ISO 4671 Rubber and plastic hose and hose assemblies - Methods for measuring the dimensions of hoses and lengths of hose assemblies
tst EN 12201-1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (pe) - Part 1: General
TS EN 14841 Lpg equipment and accessories - unloading for lpg railway tankers
TS EN 13083 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Adapter for loading and unloading from below
TS EN 13083 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Adapter for loading and unloading from below
TSE K 298 / T1 General purpose polyethylene (PE) tanks for transport and storage - for water, food chemicals
TS EN ISO 10156 Gases and gas mixtures - Determination of flammability and oxidation properties of tube valve outlets
TS ISO 8133 Hydraulic fluid power - Piston cylinders on one side - 16 mpa (160 bar) compact series - Mounting dimensions for accessories
TS EN 16752 Centrifugal pumps - test procedure for seal packagings
TS EN ISO 15995 Gas cylinders - Characteristics and tests of LPG cylinder valves - Manually operated
TS 9220 EN 26801 (Number Amendment TS EN 26801: 1993) Rubber and plastic hoses-Determination of volumetric expansion
TS EN 16249 Tanks for the transport of dangerous goods - Service equipment - Cover adapter for loading and unloading from below
TS EN 14071 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Auxiliary equipment
tst EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN ISO 1167-1 Thermoplastic pipes, fittings and tools - Used for the transport of fluids - Determination of resistance to internal pressure - Part 1: General method
TS EN ISO 1167-1 Thermoplastic pipes, fittings and tools - Used for the transport of fluids - Determination of resistance to internal pressure - Part 1: General method
TS EN ISO 1167-2 Thermoplastic pipes, fittings and tools - Used for the transport of fluids - Determination of resistance to internal pressure - Part 2: Preparation of pipe test pieces
TS EN ISO 1167-2 Thermoplastic pipes, fittings and tools - Used for the transport of fluids - Determination of resistance to internal pressure - Part 2: Preparation of pipe test pieces
TS EN ISO 1179-2 Connections for general use and flow power - Threaded ports and studs according to ISO 228-1 with elastomeric or metal-to-metal packing - Part 2: Heavy duty (S series) with elastomeric packing (type E) light duty (L series) stud bits
TS EN ISO 10462 Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance
TS EN 854Hoses and hose assemblies - Rubber reinforced textile - Hydraulic type - Features
TS EN 854 Hose and hose assemblies - Rubber reinforced textile - Hydraulic type - Features
TS EN 1993-4-3 / tst AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 16753Gas cylinders - Seamless steel cylinders for compressed gases (150 l and 3 000 liters), which can be filled in place (without dismantling) - Periodic inspection and testing
TS ISO 13966 Thermoplastic pipes and fittings - Rated ring stiffness
TS ISO 13966 Thermoplastic pipes and fittings - Rated ring stiffness
TS EN 12560-5 Flanges and connections - Gaskets for short flanges of class - Part 5: Metal ring joints for use in steel flanges
TS EN 60335-2-80 / A2 Safety regulations - For household and similar electrical appliances - Part 2-80: Particular requirements for ventilators
TS ISO 10770-2 Hydraulic fluid power - Electrical modulating hydraulic control valves - Part 2: Test methods for three-way directional control valves
TS EN 681-3 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 3: Porous rubber materials
TS EN ISO 8434-1 / ACMatic pipe connections for fluid power and general use section 1: 24 ° conical connectors
TS EN 13082 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Steam transmission valve
TS EN 13082 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Steam transmission valve
TS EN ISO 1167-1 Thermoplastic pipes, fittings and tools-Used for the transport of liquids-Determination of resistance to internal pressure-Part 1: General method
TS EN 12201-5 Plastic pipe systems - For pressurized drinking and potable water, drainage and sewage - Polyethylene (PE) - Part 5: Suitability of the system for its purpose
TS EN ISO 27509: 2012 / AC Oil and gas industries - Flange connections compatible with IX sealing ring
TS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified high temperature properties
TS EN 14432 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air intake valves
TS EN 13121-3 Grp tanks-Section for surface use 3: Design and workmanship
TS ISO 13956 Plastic pipes and fittings - Determination of adhesion strength - Tear test for polyethylene (pe) tools
TS ISO 13956 Plastic pipes and fittings - Determination of adhesion strength - Tear test for polyethylene (pe) tools
TS EN ISO 16148 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission test for periodic inspection (AT)
TS EN 1515-2 Flanges and connections-Bolting-Part 2: Classification of bolt materials for steel flanges, pn short notation
TS EN 1515-2 Flanges and connections-Bolting-Part 2: Classification of bolt materials for steel flanges, pn short notation
TS EN 13771-2 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
TS EN 12493 + A1 Welded steel tanks for liquefied petroleum gas (lpg) - road tankers - Design and manufacture
TS EN 12560-1 Flanges and connections - Gaskets for short flanged class flanges - Part 1: Pluggable or non-plug metallic flat seals
TS ISO 12176-3 Plastic pipes and fittings - Equipment for polyethylene systems with melting connection - Part 3: Operator identification
TS ISO 12176-3 Plastic pipes and fittings - Equipment for polyethylene systems with melting connection - Part 3: Operator identification
TS ISO 11755 Tubes in bundles for liquefied gases (excluding acetylene) which are continuously gaseous - Inspection during filling
TS EN 12449 Copper and copper alloys - Seamless round tubes - for general purposes
TS EN 13052-1 Effect of substances on drinking water-Organic substances-Determination of color and turbidity of water in pipelines-Part 1: Test method
TS EN 1555-4 Plastic piping systems - For the transport of gas fuels - Polyethylene (PE) - Part 4: Valves
FprEN 19 Industrial valves - Marking of metal valves
TS EN ISO 10497 Valves - Test properties of fire type valves
TS ISO 18553 Test method for evaluating the degree of pigment or carbon black dispersion in polyolefin pipes, pipe fittings and compounds
TS ISO 18553 Test method for evaluating the degree of pigment or carbon black dispersion in polyolefin pipes, pipe fittings and compounds
TS EN 161 + A3 Automatic shut-off valves for gas burners and gas appliances
TS EN 62364 Hydraulic machines - Guidance on hydro-abrasive erosion in Kaplan, Francis and Pelton turbines
TS EN 13480-4 / A1 Industrial metallic tubes - Part 4: Materials
TS EN 161 + A3 Automatic shut-off valves for gas burners and gas appliances
TS 821 EN 1916 / AC Concrete pipes and fittings - Unreinforced, steel fiber and reinforced
TS EN 13160-2 Leak detection systems - Part 2: Pressure and vacuum systems
TS EN 13160-2 Leak detection systems - Part 2: Pressure and vacuum systems
TS EN 12200-1: 2016Plastic pipes - For rainwater - For external use above ground - Polyvinylchloride (pvc-U) without plasticizer - Part 1: Pipe specifications, connections and systems
TS EN 13530-1 Cryogenic tanks-Section, portable vacuum-insulated containers-Section 1: Key features
TS EN 13160-4 Leak detection systems - Part 4: Liquid and / or vapor detection systems for use in leachate or intermediate spaces
TS EN 13160-4 Leak detection systems - Part 4: Liquid and / or vapor detection systems for use in leachate or intermediate spaces
Pressure regulators for medical gases - Section 10524: Pressure regulators and flow fast pressure regulators
TS EN 12201-4 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
TS EN 13480-2 / A1 Industrial metallic tubes - Part 2: Materials
TS EN ISO 1179-1 Connections for general use and flow power - Threaded ports and studs according to ISO 228-1 with elastomeric or metal-to-metal packing - Part 1: Threaded ports
TS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
TS EN 13482 Rubber hoses and hose assemblies - Asphalt and bitumen - Specification
TS EN 681-1 Elastomeric seals - for water and drainage applications - Material properties - Part 1: Rubber
TS EN 1251-2 Cryogenic tanks - Portable vacuum-insulated 1000 up to liters section 2: Design, manufacture, inspection and testing
TS EN 4021 Aviation series-Titanium alloy pipe joint 8 ° 30-Corners 90 °, bulkhead
TS EN 12201-3 + A1 Plastic pipe systems for potable and domestic water, sewage and drainage under pressure - Polyethylene (PE) - Part 3: Fittings
TS EN ISO 15996 / A1 Gas cylinders - Residual pressure valves - General requirements and type tests (ISO 15996: 2005 / Amd 1: 2007)
TS EN ISO 15996 / A1 Gas cylinders - Residual pressure valves - General requirements and type tests (ISO 15996: 2005 / Amd 1: 2007)
TS EN 16480 Pumps - Minimum required efficiency of rotodynamic water pumps
TS EN 1074-5 Valves for water supply - Compliance and verification tests for favorable design requirements - Part 5: Control valves
TS EN ISO 1167-4 Thermoplastic pipes, fittings and tools-Used for transporting liquids-Determination of resistance to internal pressure-Preparation of tools
TS EN ISO 1167-4 Thermoplastic pipes, fittings and tools-Used for transporting liquids-Determination of resistance to internal pressure-Preparation of tools
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 295-1 Pipes-Clay-Glazed-Fittings and jointing parts-For wastewater and drainage-Part 1: Features
TS EN ISO 14246 Gas cylinders - Cylinder valves - Manufacturing tests and controls
tkt 2015101786 TEMPERATURE REGULATOR- FOR POWER SUPPLY-BRASS BODY-HEATING SYSTEMS
TS EN ISO 8029 Plastic hoses - General purpose, textile reinforced foldable hoses - Specifications
TS EN 14197-3 / A1 Cryogenic containers-Static, non-vacuum insulated containers part 3: Operating rules
TS EN ISO 9809-2 / T1Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Tensile and tempered steel tubes with tensile strength equal to or greater than 1100 mpa
TS ISO 12176-1 Plastic pipes and fittings - Equipment for melting polyethylene systems - Part 1: Butt welding
TS ISO 12176-1 Plastic pipes and fittings - Equipment for melting polyethylene systems - Part 1: Butt welding
TS ISO 12176-2 Plastic pipes and fittings - Equipment for fused polyethylene systems - Part 2: Electric fusion welding
TS ISO 12176-2 Plastic pipes and fittings - Equipment for fused polyethylene systems - Part 2: Electric fusion welding
TS EN 1252-2 Cryogenic tanks - Materials - Part 2: toughness properties for temperatures between 80 ° c and -20 ° c
TS EN 10310 Steel pipes and fittings - For offshore and offshore pipelines - Polyamide powder-based inner and outer coatings
TS ISO 6194-5 Rotary shaft lip seals - Part 5: Identification of visible defects
TS EN 13160-1 Leak detection systems - Part 1: General principles
TS EN 13160-1 Leak detection systems - Part 1: General principles
TS EN ISO 7866 / AC Gas cylinders - Refillable seamless aluminum alloy gas cylinders - Design, construction and testing
TS EN ISO 5136 Acoustics - Determination of sound power emitted by fans and other means of moving air - in-channel method (ISO 5136: 2003)
TS ISO 10691 Gas cylinders - Refillable welded steel tubes for liquefied petroleum gas (LPG) - Procedures for checks before, during and after filling
TS ISO 6953-3 Pneumatic fluid power - Compressed air pressure regulators and filter regulators - Part 1: Alternative test methods for measuring flow rate characteristics of pressure regulators
TS EN 331 Valves-For building gas installation-Manually operated-Ball and bottom-bed conical plug valves
TS EN 1074-6 Valves - For water supply - Compliance and verification tests with intended requirements - Part 6: Hydrants
TS EN ISO 15877-5 / A1 Plastic pipe systems - For hot and cold water systems - Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: Suitability of the system for its purpose
TS EN 16657 Tanks for the transport of dangerous goods - Equipment for transport tanks for devices to prevent overfilling of fixed tanks
TS EN ISO 10297 Gas cylinders - Cylinder valves - Specifications and type tests
TS EN ISO 13769 Gas cylinders - Stamp marks
TS EN ISO 1452-5 Plastic pipe systems - Used for drinking and potable water, underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 5: suitability of the system
TS EN ISO 1452-5 Plastic pipe systems - Used for drinking and potable water, underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 5: suitability of the system
TS ISO 6406 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and tests
TS EN 16304 Automatic ventilation valves for gas burners and gas appliances
TS EN 14427 Fully wound composite tubes - Portable for liquefied petroleum gases (LPG) - Refillable - Design and manufacture
TS EN 16522 Service equipment for tanks - Ventilation equipment for tanks for the transport of dangerous goods Flame arresters
TS EN 16522 Service equipment for tanks - Ventilation equipment for tanks for the transport of dangerous goods Flame arresters
TS EN 1092-1: 2007 + A1: 2013 / AC Flanges and connections - Circular flanges for pipes, valves, fittings and accessories - PN short designation - Part 1: Steel flanges
TS EN 14596 Tanks for the transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
TS EN 14596 Tanks for the transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
TS EN 13348 Copper and copper alloys - Seamless round copper tubes for medical gases or vacuum
TS EN ISO 22434 Portable gas cylinders - Inspection and maintenance of cylinder valves
TS EN ISO 22434 Portable gas cylinders - Inspection and maintenance of cylinder valves
TS ISO 11119-1 Gas cylinders - Refillable composite construction - Design, manufacture and testing - Part 1: 450: Composite gas cylinders and containers with perimeter wrapped fiber reinforcement up to XNUMX liters
TS EN ISO 10961 Gas cylinders - Tube bundles - Design, manufacturing, testing and inspection
TS EN 14893 Lpg hardware and accessories - Portable capacity for Lpg Welded steel pressure drums between 150 liter and 1000 liter
TS ISO 1219-2 Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams
TS EN 60335-2-65 / A1Security rules - For household electrical appliances - Part 2-65: Particular requirements for air purification devices
TS EN 295-5 Pipes - Fittings and joining parts - Clay glazed - Outdoor - For wastewater and drainage - Part 5: Pipes and glazing pipes made of glazed clay - Specifications
TS EN 1012-1 Safety rules for compressors and vacuum pumps-Part 1: Compressors
TS EN 1012-1 Safety rules for compressors and vacuum pumps-Part 1: Compressors
TS EN 13082 + A1 Tanks for transporting dangerous goods Service equipment used in tanks Vapor transmission valve
TS EN 13082 + A1 Tanks for transporting dangerous goods Service equipment used in tanks Vapor transmission valve
TS EN ISO 7866 Gas cylinders - Refillable seamless aluminum alloy gas cylinders - Design, construction and testing
TS EN 13160-7 Leak detection systems - Part 7: General rules and test methods for intermediate gaps, leak proof linings and leak proof liners
TS EN 13160-7 Leak detection systems - Part 7: General rules and test methods for intermediate gaps, leak proof linings and leak proof liners
TS EN 14197-3 / AC Cryogenic tanks - Stationary, non-vacuum insulated tanks - Part 3: Operating rules
TSE K 166Thermoplastic composite pipes - Polyethylene (pe) based - Continuous fiber reinforced, spiral wound - For pressurized drinking and potable water
TS EN ISO 22435 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type test (ISO 22435: 2007)
TS EN 13616-2 Overfill prevention devices for liquid fuel stationary tanks - Part 2: Overfill prevention without a shut-off device
TS EN 12735-2: 2016 Copper and copper alloys-Seamless round copper tubes for air conditioning and cooling-Section 2: Device pipes
TS EN 16129 Pressure regulators, automatic switchgear and associated safety devices and adapters for butane, propane and mixtures thereof, with a maximum capacity of 4 kg / h, set to a maximum 150 bar pressure
TS EN 13109 LPG equipment and accessories - LPG tanks and drums - Disposal
TSE CEN / TS 764-8 Pressurized equipment and combinations - Part 8: Proof test
TS EN 13160-3 Leak Detection Systems - Part 3: Liquid systems for tanks
TS EN 13160-3 Leak Detection Systems - Part 3: Liquid systems for tanks
TS EN ISO 2505 Thermoplastic tubes - Change in length - Test method and parameters
TSE K 323 Steam ejectors for geothermal power plants
TS EN 14570 LPG equipment and accessories - Equipping of above and below ground LPG tanks
TS EN 16522 Tanks for the transport of dangerous goods - Service equipment for tanks - Flame arresters for ventilation systems
TS EN 16522 Tanks for the transport of dangerous goods - Service equipment for tanks - Flame arresters for ventilation systems