We provide testing, auditing and certification services to all of the following standards, which have become increasingly important in the testing and certification industry we have been in for years.
TS EN 304 Boilers - Test rules with liquid fuel injection burners
TS EN 308 Heat exchangers - Test methods for determining the performance of heat recovery devices from air to air and waste gases
TS EN 1118 Heat exchangers - Refrigerated liquid refrigerants - Test methods for the determination of performance
TS EN 247 Heat exchangers - Terms and recipes
TS EN 45510-4-2 Power plants-Supply guide for equipment-Section 4: Boiler ancillary plants-Section 2: Gas / air, steam / air and gas / gas heat exchangers
TS EN 303-2 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with jet fuel burners
TS 377-4 EN 12953-4 Cylindrical boilers - Part 4: Workmanship and manufacture of pressure parts of the boiler
TS 377-5 EN 12953-5 Cylindrical boilers - Part 5: Inspection during the manufacture, documentation and marking of pressurized parts of boilers
TS 377-7 EN 12953-7 Cylindrical boilers - Part 7: Ignition system characteristics of boilers for liquid and gas fuels
TS EN 14222 Boilers-Cylindrical-Stainless steels
TS EN 12953-10 Boilers and auxiliary equipment-Boiler water quality
TS 377-12 EN 12953-12 Cylindrical boilers - Part 12: Specification for grate combustion systems of solid fuel-fired boilers
TS 377-11 EN 12953-11 Cylindrical boilers - Part 11: Acceptance tests
TS EN 12952-13 + A1 Prefabricated accessories for roofs - Fixed, permanent roof ladders
TS EN 12952-14 Prefabricated accessories for roofs - Fixed, permanent roof ladders
TS EN 12952-13 + A1 Water tube boilers and auxiliary installations - Part 13: Characteristics of flue gas treatment systems
TS EN ISO 15547-1 Petroleum petrochemical and natural gas industry - Plate type heat exchangers section 1: Plate and cage type heat exchangers
TS EN ISO 15547-2 Oil, petrochemical and natural gas industries - Plate heat exchangers - Part 2: Bronze aluminum plate heat exchangers
TS EN 12953-6 Cylindrical boilers - Part 6: Specifications for boiler equipment
TS EN 12953-1 Cylindrical boilers - Part 1: General
TS EN 12953-2 Cylindrical boilers - Part 2: Materials for pressure-sensitive parts and boilers of boilers
TS EN 12953-1 Cylindrical boilers - Part 1: General
TS EN 12953-2 Cylindrical lengths - Part 2: Materials for the pressure parts of lengths and auxiliary equipment
TS EN ISO 13706: 2011 (EN) Oil, petrochemical and natural gas industry - Air cooled heat exchangers
TS EN 12953-13 Cylindrical boilers - Part 13: Operating instructions
TS EN ISO 12211 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers
TS EN ISO 12212 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers - Hairpin heat exchangers
TS 13083 / T3 Tea boilers - Prismatic - Coffee shops, tea stoves, etc. - Gas and / or electrically operated
TS EN 12953-9 Cylindrical boilers - Part 9: Specification for limiting devices for boilers and accessories
TS EN 1048 Heat exchangers - Air cooled liquid coolers "dry coolers" - Test methods for determining performance
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TS EN 327 Heat exchangers - Test methods for determining the performance of forced-convection refrigerant condensers with air cooling
TS EN 328 Heat exchangers - Forced convection air cooling units for cooling - Test methods for performance determination
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TS EN 1048 Heat exchangers - Air-cooled liquid Coolers “dry coolers” - Test procedures for performance determination
TS EN 12953-13 Cylindrical boilers - Part 13: Operating instructions
TS EN 15502-1 + A1 Gas-fired boilers - Part 1: General rules and tests
TS EN 1397 Heat exchangers - Fan / coil units - Water - Test methods for performance determination
TS EN 16583 Heat Exchangers - Hydronic room fan coil units - Determination of sound power level
TS EN 12953-3 Cylindrical boilers - Part 3: Design and calculation of pressurized parts
TS EN 1397 / AC Heat exchangers - Heater / cooler (fan coil) units - Water - Test methods for performance determination of fans
TS EN 15502-2-1 + A1Gas-fired central heating boilers - Part 2-1: Specific standards for Type C devices and devices of type B1.000, B2 and B3 not exceeding 5 kW of nominal heat input
TS EN 305 Heat exchangers - Performance descriptions and general test procedures for determining performance
TS EN 306 Heat exchangers - Methods for measuring the parameters required for performance determination
TS EN 307 Heat exchangers - Guidelines for the preparation of installation, operation and maintenance instructions necessary to ensure continuity of performance
TS 377-8 EN 12953-8Cylindrical boilers - Part 8: Characteristics of overpressure safety devices
TS 377-10 EN 12953-10 Cylindrical boilers - Part 10: Specifications for feed water and boiler water quality
TS EN 1117 / A1 Heat exchangers - Liquid cooled refrigerant condensers - Test methods for determining performance
TS EN 1118 / A1 Heat exchangers - Liquid refrigerants with refrigerant cooling - Test methods for the determination of performance
TS EN 1216 Heat exchangers - Forced circulation, air heating and air cooling coils - To provide performance - Test procedures
TS EN 12952-14 Water tube boilers and auxiliary installations - Part 14: Properties of denox systems for flue gas using pressurized ammonia and ammonia-water solutions
TS EN 12953-9 Cylindrical boilers - Part 9: Specification for limiting devices for boilers and accessories
TS EN 13487 Heat exchangers - Forced convection air-cooled refrigerant condensers and dry coolers - Sound measurement "
TS EN ISO 13706 Oil and gas industry - Air-cooled heat exchangers
TS EN 14222 Boilers with stainless steel body
TS EN 14705 Heat exchangers - Method of measurement and evaluation of thermal performance in wet cooling towers
TS EN ISO 16812 Oil and gas industry - Shell and tube heat exchangers