Energy and Heat Transfer Engineering Standards

As one of the largest and most experienced organizations in certification with more full-time audit experts than any other certification body in the world, we provide certification services in all standards listed below.

TS EN 226 Burners (liquid fuel, pressurized) - Connection sizes between burners and boiler

TS EN 293 Fuel injection nozzles-Minimum specifications-Tests

TS EN 304Boilers - Test rules with liquid fuel injection burners

TS prEN 255-7 Heat pumps, driven by electric energy-Compressor-operated-Part7: Heat pumps and heat pumps used to prepare domestic hot water -Measurement of air-borne noise-Determination of sound power level

TS EN 308 Heat exchangers - Test methods for determining the performance of heat recovery devices from air to air and waste gases

TS EN 61063 Acoustic - Measurement of airborne noise from steam turbines and driven machines

TS EN 1118 Heat exchangers - Refrigerated liquid refrigerants - Test methods for the determination of performance

TS EN 247 Heat exchangers - Terms and recipes

TS EN 45510-1 Power plants-Supply guide for equipment-Part 1: Common materials

TS EN 45510-5-1 Power plants - Supply guide for equipment section 5-1: Steam turbines

TS EN 45510-5-2 Power plants-Supply guide for equipment-Section 5-Section 2: Gas turbines

TS EN 45510-5-3 Power plants-Supply guide for equipment-Part 5-3: Wind turbines

TS EN 45510-6-1 Power plants-Supply guide for equipment-Part 6-1: Turbine ancillary devices-Air removal devices

TS EN 45510-6-3 Power plants-Supply guide for equipment part 6-3: Turbine auxiliary devices-Condensing plant

TS EN 45510-6-7 Power station equipment supply guide - Section 6-7: Turbine auxiliaries - Moisture separator reheater

TS EN 45510-8-1 Power plants - Supply guide for equipment part 8-1: Control operation, measuring, setting and control devices

TS EN 61724 Photovoltaic system performance monitoring - Guide for measurement, data exchange and analysis

TS EN 45510-4-1 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 1: Equipment for the reduction of dust emission

TS EN 1834-1 Internal combustion engines reciprocating - Safety regulations for the design and construction of engines used in potentially explosive atmospheres - Part 1: Used in flammable gas and vapor environments II. group motors

TS EN 1834-2 Internal combustion engines reciprocating - Safety regulations for the design and construction of engines used in potentially explosive atmospheres - Part 2: Used in underground work sensitive to grizu and / or flammable dust. group motors

TS EN 1834-3 Internal combustion engines reciprocating - Safety regulations for the design and construction of engines used in potentially explosive atmospheres - Part 3: Used in flammable dusty environments II. group motors

TS EN 45510-3-1 Power plants - Supply guide for equipment - Part 3: Boilers - Part 1: Water pipe boilers

TS EN 45510-3-2 Power plants - Supply guide for equipment - Part 3: Boilers - Part 2: Cylindrical boilers

TS EN 45510-4-2 Power plants-Supply guide for equipment-Section 4: Boiler ancillary plants-Section 2: Gas / air, steam / air and gas / gas heat exchangers

TS EN 45510-4-7 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 7: Ash disposal plant

TS EN 45510-4-8 Power station equipment supply guide - Part 4-8: Boilers - Auxiliaries - Dust removal plant

TS EN 45510-6-4 Power station hardware supply guide - Part 6-4: Turbine aids - Pumps

TS EN 45510-6-8 Power station equipment supply guide - Section 6-8: Turbine aids - Cooling water systems

TS EN 45510-7-2 Power station equipment supply guide - Part 7-2: Plumbing and valves - Boiler and high pressure pipe valves

TS ISO 13464 Simultaneous determination of uranium and plutonium in solvent solutions from reprocessing plants: a combined method using K-absorption edge and x-ray fluorescence spectrometry

TS EN 12514-1 Installations for oil supply systems of oil-burning burners - Safety and test features - Oil supply pumps, control and safety valves, supply tanks

TS EN 12514-2 Installations for oil supply systems of oil-burning burners - Safety and tests specifications - Valves, pipes, filters, degreaser, meters

TS EN 303-2 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with jet fuel burners

TS EN ISO 8990 Thermal insulation - Determination of steady state heat conduction properties - Calibrated and enclosed hot box

TS EN 60045-1 Steam turbines- Part 1: Specifications

TS EN 60953-3 Rules for thermal acceptance tests for steam turbines-Part 3: Thermal performance verification tests for re-adapted steam turbines

TS ISO 8107 Nuclear power plants-Sustainability-Terms and definitions

TS EN 12952-16 Water pipe boilers and auxiliary installations - Part 16: Characteristics of grate and fluidized-bed combustion systems for solid fuels in boilers

TS 377-4 EN 12953-4Cylindrical boilers - Part 4: Workmanship and manufacture of pressure parts of the boiler

TS 377-4 EN 12953-4 Cylindrical boilers - Part 4: Workmanship and manufacture of pressure parts of the boiler

TS 377-5 EN 12953-5 Cylindrical boilers - Part 5: Inspection during the manufacture, documentation and marking of pressurized parts of boilers

TS 377-7 EN 12953-7 Cylindrical boilers - Part 7: Ignition system characteristics of boilers for liquid and gas fuels

TS EN 14222 Boilers-Cylindrical-Stainless steels

TS EN 50380 Data sheets and nameplate information for solar battery modules

TS EN 12952-12 Boilers and auxiliary equipment-Boiler water quality

TS EN 12953-10 Boilers and auxiliary equipment-Boiler water quality

TS EN 12952-15 Water pipe boilers and auxiliary installations - Part 15: Acceptance tests

TS 377-12 EN 12953-12 Cylindrical boilers - Part 12: Specification for grate combustion systems of solid fuel-fired boilers

TS 377-11 EN 12953-11 Cylindrical boilers - Part 11: Acceptance tests

TS EN 12067-2 Air / gas ratio controls for gas burners and gas burners

TS EN 45510-2-8 Guidance for the supply of power plant equipment-Electrical equipment-Part 2-8: Power cables

TS EN 12952-13 + A1 Prefabricated accessories for roofs - Fixed, permanent roof ladders

TS EN 12952-14 Prefabricated accessories for roofs - Fixed, permanent roof ladders

TS EN 50308 Wind turbines - Protective measures - Requirements for design, operation and maintenance

TS EN 12952-12 Water tube boilers and auxiliary installations - Part 12: Boiler feed water and boiler water quality

TS EN 12952-13 + A1 Water tube boilers and auxiliary installations - Part 13: Characteristics of flue gas treatment systems

TS EN 62124 Independent solar cell (PV) systems - Design verification

TS EN 61215 Crystalline silicon terrestrial photovoltaic (PV) modules - Design evaluation and type acceptance

TS EN 61400-1 Wind turbines - Part 1: Design guidelines

TS EN ISO 15547-1 Petroleum petrochemical and natural gas industry - Plate type heat exchangers section 1: Plate and cage type heat exchangers

TS EN ISO 15547-2 Oil, petrochemical and natural gas industries - Plate heat exchangers - Part 2: Bronze aluminum plate heat exchangers

TS EN 521 Specification for liquefied petroleum gas (lpg) devices for specific purposes - Portable devices using liquefied petroleum gases at vapor pressure

TS EN 61400-12-1 Wind turbines - Part 12-1: Measurement of energy performance of electricity generating wind turbines

TS EN 50461 Solar cells - Data sheet information and product data for Silicon crystalline solar cells

TS EN 61400-25-1 Wind turbines - Part 25-1: Communications on monitoring and control of wind power plants - General description of principles and models

TS EN 13771-2 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units

TS EN 61730-1 Photovoltaic (pv) module safety specification - Part 1- Construction features

TS EN 61730-2 Photovoltaic (pv) module safety specification - Part 2- Test specifications

TS EN 13771-2 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units

TS EN 225-1 Burners -Burner pumps and motors-Connection dimensions section 1: Burner pumps

TS EN 225-2 Burners -Burner pumps and motors-Connection sizes- Part 1: Burner motors

TS EN ISO 9346 Hygothermal performance of buildings and building materials - Physical quantities for mass transfer - Terms and definitions

TS EN 15450 Heating systems in buildings-Design of heat pump heating systems

TS ISO 3046-6 Internal combustion engines - Reciprocating - Performance - Part 6: Overspeed protection

TS EN 521 Specification for devices for the combustion of liquefied petroleum gas (lpg) - Portable devices using liquefied petroleum gas at vapor pressure

TS EN 676 + A2 Burners - Automatic blower - for gas fuels

TS EN 61400-12-1 Wind turbines - Part 12-1: Power performance measurements of electricity generating wind turbines

TS EN 61400-25-1 Wind turbines - Part 25-1: Communications on monitoring and control of wind power plants - General description of principles and models

tst EN 61400-25-3 Wind turbines - Part 25-3: Communication systems for control and monitoring of wind power plants - Information exchange models

TS EN 61400-25-5 Wind turbines - Part 25-5: Communication on control and monitoring of wind power plants - Compliance test (IEC 61400-25-5: 2006)

TS EN 61400-3 Wind turbines - Part 3: Design rules for offshore wind turbines (IEC 61400-3: 2009)

TS EN 437 + A1 Test gases - Test pressures - Device categories

TS EN ISO 14314 Internal combustion piston engines - Coil starting equipment - General safety requirements

TS EN 61683 Photovoltaic systems - Power conditioners - Yield measurement procedure

tst EN 61427-1 Secondary batteries and batteries - For renewable energy systems - General rules and test methods - Part 1: Photovoltaic system grid output application

TS EN 61194 Characteristic parameters of grid-independent photovoltaic systems (IEC 1194: 1992, modified)

tst EN 62124 Independent solar cell (pv) systems - Design verification

TS EN 50524 Data sheet and nameplate for photovoltaic converters

TS EN 50513 Solar sheets - Data sheet and product data sheet for crystalline silicon sheets for solar cell production

TS EN 676 + A2 / AC Burners - Automatic Blowing - for gas fuels

TS EN ISO 8178-6 / T1 (Number modification, TS ISO 8178-6) Reciprocating internal combustion engines - Measuring exhaust emissions - Part 6: Measurement results and test report

TS EN 61724 Monitoring of photovoltaic system performance - Guidelines for measurement, data exchange and analysis

TS EN 50380 Datasheet and nameplate information for photovoltaic modules

TS EN 60904-9 Photovoltaic devices - Part 9: Solar simulator performance guidelines (IEC 60904-9: 2007)

TS EN 61215 Terrestrial photovoltaic (PV) modules in crystal silicon structure - Design capability and type approval

TS EN 61646 Thin film terrestrial photovoltaic modular - Design capability and type approval (IEC 61646: 2008)

TS EN 61829 Crystalline silicon photovoltaic (PV) array - Measurement of field IV characteristics

TS EN 50513 Solar silicon wafers - Datasheet and product data sheet for crystalline silicon wafers for solar cell production

TS EN 61730-1 Photovoltaic (PV) module safety qualification - Part 1- Rules for construction (IEC 61730-1: 2004, modified)

TS EN 61730-2 Photovoltaic (PV) module safety qualification - Part 2: Rules for testing (IEC 61730-2: 2004, modified)

TS 377-1 EN 12953-1 / tst T1 Cylindrical boilers - Part 1: General

TS EN 257 Thermostats - Mechanical - for gas appliances

TS EN 61400-24 Wind turbines - Part 24: Protection against lightning

TS EN 62109-1 Safety of transducers for use in photovoltaic power systems - Part 1: General requirements

tst EN 50530 Total efficiency of grid-connected photovoltaic converters

TS EN 61400-1 / A1 Wind turbines - Part 1: Design requirements (IEC 61400-1: 2005 / A1: 2010)

TS EN 12953-6 Cylindrical boilers - Part 6: Specifications for boiler equipment05.06.2012

TS EN 50521 Connectors for photovoltaic systems - Safety requirements and tests

TS EN ISO 23993 Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity

TS EN 61400-25-6: 2011 Wind turbines - Part 25-6: Communication on control and monitoring of wind power plants - Logic node classes and data classes for status monitoring

TS EN ISO 12952-1 Combustion behavior of textile bedding - Part 1: Ignition source: Quenched cigarette

TS EN 61701 Salt water corrosion test of photovoltaic (PV) modules (IEC 61701: 2011)

TS EN 61400-1 / A1 Wind turbines - Part 1: Design requirements

TS EN 14276-1 + A1 Pressure equipment for refrigeration systems and heat pumps part 1: Tanks - General specifications

TS EN 14276-2 + A1 Pressure equipment for refrigeration systems and heat pumps part 2: Pipes general rules

TS EN 12953-6 Cylindrical boilers - Part 6: Specifications for boiler equipment

TS ISO 8178-4 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 4: Steady state test cycles for different engine applications

TS ISO 8178-2 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 2: Measurement of gas and particulate exhaust emissions under field conditions

TS ISO 8178-1 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 1: Measurement of exhaust emissions of gaseous and particulate matter in the test bed

TS ISO 8178-5 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 5: Test fuels

TS EN 12975-1 + A1 Thermal solar energy systems and components-Solar collectors-Part 1: General rules

TS EN 15879-1 Test and evaluation of electrically driven compressor-driven direct-coupled heat pump pairs for space heating and / or cooling-Part 1: Direct conversion to water heat pumps

TS EN 16084 Cooling systems and heat pumps - Sufficient sealing of components and connections

TS EN ISO 50001 Energy management systems - Guidelines for terms and use

TS EN 50548 Junction boxes for photovoltaic modules

TS EN 267: 2009 + A1: 2011 Burners - For liquid fuels - Automatic forced draft

TS EN 12952-2 Water pipe boilers and auxiliary installations - Part 2: Materials for pressure-sensitive parts of boilers and accessories

TS EN 12952-6 Water tube boilers and auxiliary installations - Part 6: Inspection during manufacture; Documentation and marking of pressure-exposed parts

TS EN 60671 Nuclear reactors - Important equipment and control systems for safety - Monitoring experiments

TS EN 61500 Nuclear reactors - Important equipment for safety and control - Data communication in systems where category a functions are applied

TS EN 61853-1 Photovoltaic module performance test and energy rating section 1: Irradiation and temperature performance measurements and power rating

TS EN 62109-2 Safety of transducers for use in photovoltaic power systems - Part 2: Particular requirements for transducers

TS EN 12952-5 Water pipe boilers and auxiliary installations-Section 5: Workmanship and manufacture of pressure-exposed parts of the boiler

TS EN 12953-1 Cylindrical boilers - Part 1: General

TS EN 12953-2 Cylindrical boilers - Part 2: Materials for pressure-sensitive parts and boilers of boilers

Safety regulations - For household and similar electrical appliances - Part 7936-60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers

TS EN 61730-1 / A1 Photovoltaic (pv) module safety feature - Part 1- Construction features

TS EN 61730-2: 2007 / A1 Photovoltaic (pv) module safety specification - Part 2- Test specifications

TS EN 61400-25-4 Wind turbines - Part 25-2: Communications for monitoring and controlling wind power plants - Matching to the communication profile

TS EN 62006 Hydraulic machines - Acceptance tests of small hydraulic plants

TS EN 12952-3 Water pipe boilers and auxiliary installations - Part 3: Design and calculation of pressure-exposed parts

TS EN 12952-4 Water pipe boilers and auxiliary installations - Part 4: service life calculations of the boiler

TS EN 12952-5 Water pipe boilers and accessories - Part 5: Workmanship and manufacture of pressure-exposed parts of the boiler

TS EN 12952-6 Water tube boilers and auxiliary installations - Part 6: Inspection during manufacture; Documentation and marking of pressure-exposed parts

TS EN 12952-3 Water pipe boilers and auxiliary installations - Part 3: Design and calculation of pressure-exposed parts

TS EN 61701 Photoelectric (pv) modules salt mist corrosion test

TS EN 12953-1 Cylindrical boilers - Part 1: General

TS EN 12953-2 Cylindrical lengths - Part 2: Materials for the pressure parts of lengths and auxiliary equipment

TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks

TS EN 12977-5 Thermal solar energy systems and components - Specialized systems - Part 5: Performance test methods for control equipment

tst EN 298 Automatic burner control systems for gas or liquid fuel burning appliances and ovens

TS EN 298 Automatic burner control systems for gas or liquid fuel burning appliances and furnaces

TS EN 12977-4 Thermal solar energy systems and components - Specialized systems - Part 4: Performance test methods for solar boiler installations

TS EN 12977-2 Thermal solar energy systems and components - Particular systems - Part 2: Test methods for solar water heaters and boiler systems

TS EN 62253 Photovoltaic pump systems - Design capability and performance measurement

TS EN 62282-3-100 Fuel cell technology - Part 3-100: Power systems with fixed fuel cells - Safety

TS EN 12952-7 Water pipe boilers and auxiliary installations - Part 7: Requirements for boiler equipment

TS EN ISO 13706: 2011 (EN) Oil, petrochemical and natural gas industry - Air cooled heat exchangers

TS EN 12953-13 Cylindrical boilers - Part 13: Operating instructions

TS EN 50521 / A1 Connectors for photovoltaic systems - Safety requirements and tests

TS EN 12952-18 Water tube boilers and auxiliary installations - Part 18: Operating instructions

TS EN 16247-1 Energy Inspections-Part 1: General requirements

TS EN 62282-3-300 Fuel cell technologies - Part 3- 300 - Stationary fuel cells - Installation

TS EN 50521 / A1 Connectors for photovoltaic systems - Safety requirements and tests

TS EN 62282-5-1 Fuel cell technology - Part 5-1: Power systems with portable fuel cells - Safety

TS EN 61362 Guide to the features of hydraulic turbine control systems

TS EN 62282-2 Fuel cell technologies - Part 2: Fuel cell modules

TS EN 62282-6-100 / A1 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

TS EN ISO 16147 / A1 Small boat - Internal diesel engines - Engine-mounted fuel and electrical equipment

TS EN ISO 12211 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers

TS EN 16214-3: 2012 Sustainable generated biomass in energy applications - Principles, criteria, markers and validators for biofuels and biofuels - Part 3: Life cycle analysis approach for nature conservation

TS EN 50530 / A1 Total efficiency of grid-connected photovoltaic converters

TS EN 61400-4 Wind turbines Part 4: Special requirements for gear boxes

TS EN 61400-11 Wind turbine generator systems - part 11: Acoustic noise measurement techniques

TS EN 61513 Nuclear power stations - Safety measurement and controls - General requirements for systems

TS EN 61772 Nuclear power stations - Control rooms - Visual display applications

TS EN ISO 12212 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers - Hairpin heat exchangers

TS EN 62097 Hydraulic machines, radial and uniaxial - Performance conversion methods from model to prototype

TS EN ISO 11102-1 Internal combustion piston engines - Manual starting equipment - Part 1: Safety rules and tests

TS EN ISO 11102-2 Internal combustion piston engines - Manual starting equipment - Part 2: Parting angle test method

TS EN 12977-5 Thermal solar energy systems and components - Installed systems - Part 5: Performance test methods for control equipment

TS EN 12977-2 Thermal solar energy systems and components - Installed systems - Part 2: Test methods for solar water heaters and boiler systems

TS EN 60904-1 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

TS EN 60904-4 Photovoltaic devices - Part 4: Reference solar energy devices - Procedures for establishing calibration traceability

TS EN 60904-5 Photovoltaic devices - Part 5: Determination of equivalent cell temperature (ECT) of photovoltaic (PV) devices by open-circuit voltage method (IEC 60904-5: 2011)

TS EN 60904-7 Photovoltaic devices - Part 7: Calculation of spectral mismatch correction in photovoltaic device measurements

TS EN 60904-8 Photovoltaic devices - Part 8: Measurement of spectral sensitivity of photovoltaic devices (PV)

TS EN 16343 Cosmetics - analysis of cosmetic products - determination of 3-iodo-2-propynyl butylcarbamate (IPBC) in cosmetic preparations, LC-MS method

TS EN 12900 Refrigerant compressors - Presentation of classification requirements, tolerances and manufacturer's performance data

TS EN 61730-1 / A2 Photovoltaic (PV) module safety feature - Part 1- Construction features

TS EN 50548 / A1 Junction boxes for photovoltaic modules

TS EN 61400-12-2 Wind turbines - Part 12-1: Power performance measurements of wind turbines generating electricity by working with wind speed measurement system over the motor housing

TS EN 61427-1 Secondary batteries and batteries - For renewable energy systems - General rules and test methods - Part 1: Photovoltaic system grid output application

TS EN 62282-6-300 Fuel cell technologies - Part 6 -300: Micro fuel cell power systems - Replacement of the fuel cartridge

TS EN 15218 Liquid cooling packs and air conditioners with evaporative cooled condensers, electrical driven compressors for space cooling - Terms, recipes, test conditions, test methods and rules

TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods

TS EN 14825 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Assessment and test of seasonal performance under partial load conditions

TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification

TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions

TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 4: Operating characteristics, marking and operating instructions

TS EN 14825 Electrically driven compressor air conditioners, liquid cooling packs and heat pumps for ambient heating and cooling - Test and partial load classification and calculation of seasonal performance

TS EN 13136 Cooling systems and heat pumps - Pressure relief devices and piping - Calculation methods

TS EN 62364 Hydraulic machines - Guidance on hydro-abrasive erosion in Kaplan, Francis and Pelton turbines

TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods

TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification

TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions

TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 4: Operating requirements, marking and operating instructions

TS EN 16214-1 Sustainability criteria for biofuels and biolic products for energy applications - Principles, criteria, indicators and validators - Part 1: Terminology

TS EN 12952-2 Water pipe boilers and auxiliary installations - Part 2: Materials for pressure-sensitive parts of boilers and accessories

TS EN 12952-18 Water tube boilers and auxiliary installations - Part 18: Operating instructions

TS EN 12952-11 Water pipe boilers and auxiliary installations - Part 11: Specification for limiting devices for boilers and accessories

TS EN 12953-9 Cylindrical boilers - Part 9: Specification for limiting devices for boilers and accessories

tst EN 60709: 2010 Nuclear power plants - Important instrumentation and control systems for safety - Separation (IEC 60709: 2004)

TS ISO 8178-1 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Measurement of gases and particles in exhaust emissions in the engine dynamometer

TS ISO 8178-2 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 2: Measuring gas and particulate exhaust emissions in the field

TS ISO 8178-4 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 4: Test cycles for different engine applications

TS EN 61400-25-6 Wind turbines - Part 25-6: Communication systems for monitoring and control of wind power plants - Logical node classes and data classes for status monitoring (IEC 61400-25-6: 2010)

TS EN 61730-1 / A1 Photovoltaic (pv) module safety feature - Part 1- Construction features

Safety requirements for photovoltaic (PV) modules - Part 61730: Rules for testing

tst EN 60891 Photovoltaic elements - Processes for temperature and light intensity correction measured in IV characteristics

TS EN 62093 System stability components for photovoltaic systems - Assessment of design capability in natural environments (IEC 62093: 2005)

tst EN ISO 9806 Solar energy - Solar collectors - Test methods

TS EN 50524 Data sheet and nameplate for photovoltaic inverters

TS EN 1048 Heat exchangers - Air cooled liquid coolers "dry coolers" - Test methods for determining performance

TS EN ISO 17225-1 Solid biofuels - Fuel specifications and classes - Part 1: General specifications

TS EN ISO 17225-2 Solid biofuels - Fuel properties and classes - Part 2: Classified wood pellets

TS EN ISO 17225-3 Solid biofuels - Fuel specifications and classes - Part 3: Classified wood briquettes

TS EN ISO 17225-4 Solid biofuels - Fuel specifications and classes - Part 4: Classified wood chips

TS EN ISO 17225-5 Solid biofuels - Fuel specifications and classes - Part 5: Classified firewood

TS EN ISO 17225-6 Solid biofuels - Fuel properties and classes - Part 6: Non-wood pellets classified

TS EN ISO 17225-7 Solid biofuels - Fuel properties and classes - Part 7: Non-wood briquettes classified

TS EN ISO 16559 Solid biofuels - Terms, descriptions and explanations

TS EN ISO 23553-1 Safety and control devices for liquid fuel burners and liquid fuel combustion devices - Particular requirements - Part 1: Automatic and semi-automatic valves

TS EN 16340 Safety and control devices for gas or liquid fuel combustion devices and burners-Combustion product detection devices

TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices

TS EN 327 Heat exchangers - Test methods for determining the performance of forced-convection refrigerant condensers with air cooling

TS EN 328 Heat exchangers - Forced convection air cooling units for cooling - Test methods for performance determination

TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices

TS ISO 8178-5 Internal combustion engines - Exhaust emission measurement part 5: Test fuels

TS EN 16247-2 Energy Inspections - Part 2: Buildings

TS EN 16247-3 Energy Audits - Part 3: Processes

TS EN 16247-4 Energy Inspections - Part 4: Transportation

TS EN ISO 22975-3: 2014 Solar Energy - Collecting parts and materials - Part 3: Absorbing surface durability

TS EN 61400-23 Wind turbines - Part 23: Full scale structural tests of rotor blades

TS EN 62670-1: 2014 photovoltaic concentrator - Performance test - Part 1: Standard conditions

TS EN 60904-8 Photovoltaic devices - Part 8: Photovoltaic device spectral sensitivity measurement

TS EN 61839: 2014 Nuclear power plants - Control room design - Functional analysis and assignment

TS EN 62566 Nuclear power plants - Important measurements and controls in terms of safety - HDL Development - Programmable integrated circuits for systems that perform Category A functions

tst EN 61400-23 Wind turbines - Part 23: Full scale structural tests of rotor blades

TS EN ISO 22975-3 Solar energy - Collector components and materials - Part 3: Absorbing surface durability

TS EN ISO 6806 Rubber hoses and hose assemblies-Features used in liquid fuel burners

TS EN 61400-2 Wind turbines - Part 2: Small wind turbines

TS EN 62282-4-101 Fuel cell technologies - Part 4-101: Fuel cell power systems and backup power units (APU) that provide driving force outside road vehicles - Safety of electrically driven industrial cargo vehicles

TS EN 12186 Gas supply systems - Gas pressure regulating stations - For transmission and distribution - Functional requirements

TS EN 1048 Heat exchangers - Air-cooled liquid Coolers “dry coolers” - Test procedures for performance determination

TS EN 13136 Cooling systems and heat pumps - Pressure relief devices and piping - Calculation methods

TS EN 267 + A1 Burners - For liquid fuels - With automatic forced draft

TS EN 61730-1 / A2 Photovoltaic (PV) module safety qualification - Part 1- Rules for construction (IEC 61730-1: 2004 / A2: 2013)

tst EN 62116 Public interconnected solar converters - Test procedure for island protection

TS EN 62670-1: 2014 Photovoltaic concentrators (CPV) - Performance test - Part 1: Standard requirements (IEC 62670-1: 2013)

TS EN 16247-1 Energy audits - Part 1: General rules

TS EN 16247-2 Energy audits - Part 2: Buildings

tst EN 62716 Photovoltaic (PV) modules - Ammonia corrosion test

TS EN 16247-3 Energy audits - Part 3: Processes

TS EN 16247-4 Energy audits - Part 4: Transport

tst EN 62364 Hydraulic machines - Guidance on hydro-abrasive erosion in Kaplan, Francis and Pelton turbines (IEC 62364: 2013)

TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks

TS EN 12977-4 Thermal solar energy systems and components - Specialized systems - Part 4: Performance test methods for solar boiler installations

TS EN 12977-1 Thermal solar systems and components - Special systems - Part 1: Performance test methods for solar water heating tanks

Safety regulations - for household and similar electrical appliances - part 7936- 60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers

TS EN 12309-1 Air-conditioning and / or heat pump devices-Gas burner-Absorption and adsorption-Net heat input up to 70 kw (including 70 kw) -Chapter 1: Terms and definitions

TS EN 12309-3 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 3: Test conditions

TS EN 12309-4 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 4: Test methods

TS EN 12309-5 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 5: Requirements

TS EN 12309-6 Air-conditioning and / or heat pump devices-Gas burner-Absorbable and adsorbed-Net heat input up to 70 kw (including 70 kw)

TS EN 12309-7 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 7: Particular requirements for hybrid devices

TS EN 50465 Gas-fired appliances - Combined heat and power devices with nominal heat input equal to or less than 70 kW

TS EN 50548 / A2 Joint boxes for photovoltaic modules

TS EN 61730-1 / A11 Photovoltaic (PV) module safety qualification - Part 1- Rules for construction

TS EN 50548 / A2 Junction boxes for photovoltaic modules

TS EN 50548 / A1 Junction boxes for photovoltaic modules

TS EN 50548 Junction boxes for photovoltaic modules

TS ISO 8300 Nuclear fuel technology - Determination of plutonium content in plutonium dioxide of nuclear fuel quality - Gravimetric method

TS ISO 1709 Nuclear energy - Fissile materials - Criticality principles during storage, handling and processing

TS EN ISO 7345 Thermal insulation - Physical quantities and recipes (ISO 7345: 1987)

TS EN 12953-13 Cylindrical boilers - Part 13: Operating instructions

TS EN 15450 Heating systems in buildings - Design of heat pump heating systems

TS ISO 50002 Energy management and usage features

TS ISO 50002 Energy audits - Rules and operating instructions

TS ISO 50003 Energy management systems - Requirements for organizations providing audit and certification of energy management systems

TS ISO 50004 Energy management systems - Guidelines for the implementation, maintenance and improvement of an energy management system

TS EN 257 Thermostats - Mechanical - for gas appliances

tst EN ISO 17225-1 Solid biofuels - Fuel specifications and classes - Part 1: General specifications

tst EN ISO 17225-2 Solid biofuels - Fuel properties and classes - Part 2: Classified wood pellets

tst EN ISO 17225-3 Solid biofuels - Fuel properties and classes - Part 3: Classified wood briquettes

tst EN ISO 17225-4 Solid biofuels - Fuel specifications and classes - Part 4: Classified wood chips

tst EN ISO 17225-5 Solid biofuels - Fuel properties and classes - Part 5: Classified firewood

tst EN ISO 17225-6 Solid biofuels - Fuel properties and classes - Part 6: Classified non-wood pellets

tst EN ISO 17225-7 Solid biofuels - Fuel properties and classes - Part 7: Non-wood briquettes classified

TS EN 16440-1 Test methods for refrigerated appliances for insulated transport - Part 1: Mechanical refrigerating device with forced air circulation evaporator with or without heating device

TS ISO 8528-5 Alternating current generator sets driven by reciprocating internal combustion engines - Part 5: Generator sets

TS ISO 50003 Energy management systems - requirements for organizations providing auditing and certification of energy management systems

TS ISO 50004 Energy management systems - Guidance for the implementation, maintenance and improvement of the energy management system.

TS EN 12102 Air conditioners, liquid cooling packages, heat pumps and dehumidifiers driven by electric compressors for heating and cooling spaces - Measurement of airborne noise - Determination of sound power level

TS EN 12975-1 + A1 Thermal solar energy systems and components-Solar collectors-Part 1: General rules

TS EN ISO 16995 Solid biofuels - Determination of water-soluble chloride, sodium and potassium content

TS EN 61400-11 Wind turbines - Part 11: Acoustic noise measurement techniques

TS EN 62241 Nuclear Power Plants-Main control room-Reception functions and presentation.

TS EN 60987 Nuclear Power Plants Hardware design rules for safety-critical measuring devices and control computer-based systems

TS EN 60904-2 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices.

TS EN 62790 Junction boxes for photovoltaic modules - Safety regulations and tests.

TS EN 62817 Photovoltaic systems - design competence of solar energy monitors

TS EN 62852 Fastening elements for application in photovoltaic systems

tst EN ISO 16995 Solid biofuels - Determination of water-soluble chloride, sodium and potassium content

TS EN 12186 Gas supply systems - Gas pressure regulating stations - For transmission and distribution - Functional requirements

TS ISO 7967-4 Internal combustion engines - Reciprocating movement - Terms and recipes section 4: Overfilling, air and exhaust gas system

TS ISO 9463 Nuclear energy - Nuclear fuel technology - Spectrophotometric determination of plutonium in nitric acid solutions

TS ISO 8299 Nuclear fuel technology - Determination of isotopic and elemental uranium and plutonium concentrations in nuclear materials in nitric acid solutions by thermal ionization mass spectrometry

TS ISO 9005 Nuclear energy - Uranium dioxide powder and sintered pellets - Determination of oxygen / uranium atom ratio by amperometric method

TS ISO 13465 Nuclear energy - Nuclear fuel technology - Spectrophotometric determination of neptunium in nitric acid solutions

TS ISO 9278 Nuclear energy - Uranium dioxide pellets - Determination of density and volume ratio of open and closed porosity

Preparation of TS ISO 11483 Plutonium sources and determination of 238pu / 239pu isotope ratio by alpha spectrometer

TS ISO 7476 Nuclear fuel technology - Determination of uranium in uranyl nitrate solutions of nuclear purity quality - Gravimetric method

TS ISO 12183 Nuclear fuel technology - Coulometric analysis of plutonium in controlled potential

TS ISO 3046-4 Internal combustion engines - Reciprocating - Performance - Part 4: Speed control

TS ISO 8178-9 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 9: Test cycles and test methods for exhaust gas emissions from compression ignition engines operating under transition conditions

TS ISO 7967-5 Internal combustion engines-Moving and commuting-Terms and descriptions section 5: Cooling systems

TS ISO 7967-8 Internal combustion engines - Moving and moving - Terms and descriptions section 8: Starting systems

TS ISO 7967-1 Internal combustion engines reciprocating moving-Terms for parts and systems section 1: Structure and exterior elements

TS ISO 7967-2 Internal combustion engines reciprocating moving-Terms and recipes section 2: Moving main parts

TS ISO 7967-3 Internal combustion engines - Reciprocating terms and descriptions section 3: Valves camshaft and actuating mechanisms

TS ISO 8528-2 Alternating current generator sets driven by reciprocating internal combustion engines - Part 2: Engines

TS ISO 7967-6 Internal combustion engines - Moving and moving - Terms and descriptions section 6 - Lubrication systems

TS ISO 8178-7 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 7: Determination of the engine family

TS ISO 3046-1 Internal combustion engines - Moving and moving - Performance - Part 1: Declaration of power, fuel and oil consumption and test methods - Additional requirements for general use engines

TS ISO 3046-3 Internal combustion engines - Reciprocating - Performance - Part 3: Test measurements

TS ISO 3046-5 Internal combustion engines - Reciprocating - Performance - Part 5: Torsional vibration

TS ISO 8528-1 Alternating current generator sets driven by reciprocating internal combustion engines - Part 1: Application, declaration values and performance

TS ISO 8528-3 Alternating current generator sets driven by reciprocating internal combustion engines - Part 3: Alternating current generators for generator sets

TS ISO 2710-1 Reciprocating internal combustion engines - Terms and definitions - 1. Chapter: Terms and definitions for engine design and operation

TS ISO 2710-2 Reciprocating internal combustion engines - Terms and definitions - 2. Chapter: Terms and definitions for engine maintenance

TS ISO 8528-4 Alternating current generator sets driven by reciprocating internal combustion engines - Part 4: Control unit and coupling

TS ISO 8528-6 Alternating current generator sets driven by reciprocating internal combustion engines - Part 6: Test methods

TS ISO 8301 / A1 Thermal insulation - Determination of thermal resistance and related properties in steady state - Methods for determination of heat flow

TS ISO 9459-4 Solar energy-Residential water heating systems-Part 4: Characterization of system performance by component tests and computer simulation

TS ISO 9459-5 Solar energy-Residential water heating systems-Part 5: System performance characterization with all system tests and computer simulation

TS ISO 9459-4 Solar heating - Residential water heating systems - Part 4: System performance characterization through component tests and computer simulation

TS ISO 9459-5 Solar heating - Residential water heating systems - Part 5: System performance characterization through whole system experiments and computer simulation

TS ISO 21483 Determination of the solubility of plutonium in nitric acid in irradiated (U, Pu) O2 mixed oxide fuel pellets

TS EN 15502-1 + A1 Gas-fired boilers - Part 1: General rules and tests

TS EN 1397 Heat exchangers - Fan / coil units - Water - Test methods for performance determination

TS EN 16583 Heat Exchangers - Hydronic room fan coil units - Determination of sound power level

TS EN 50156-1 Electrical equipment for ovens and ancillary equipment - Part 1: Application design and installation rules

TS EN 50156-2 Electrical equipment for furnaces and ancillary equipment - Part 2: Rules for the design, development and type approval of safety devices and subsystems

TS EN 16247-5 Energy audits - Part 5: Competence of energy auditors

TS EN 62670-2 Photovoltaic concentrators (CPV) - Performance test - Part 2: Energy measurement

TS ISO 8178-8 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 8: Determination of engine group

TS EN 61400-25-2 Wind turbines - Part 25-2: Communication systems for monitoring and control of wind power plants - Information models

TS EN 61400-25-3 Wind turbines - Part 25-3: Communication systems for control and monitoring of wind power plants - Information exchange models

tst EN 61400-25-2 Wind turbines - Part 25-2: Communication systems for monitoring and controlling wind power plants - Information models

TS EN 50597 Vending Machines Energy Consumption

TS ISO 50015 Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance

TS ISO 6622-1 Internal Combustion Engines - Piston Rings - 1. Rectangular Segments Made of Cast Iron

TS EN ISO 17829 Solid biofuels - Determination of diameter and length of pellets

TS EN 12952-1 Water tube boilers and auxiliary installations - part 1: General

TS EN 16325 + A1 Origin guarantees for energy - Origin guarantees for electrical energy

TS CWA 16975 Economically efficient intermediate stations for district heating

TS EN 50583-1 Photovoltaic systems for buildings - Part 1: BIPV modules

TS EN 50583-2 Photovoltaic devices for buildings - Part 2: BIPV systems

TS EN 62759-1 Photovoltaic (PV) modules - Transport tests - Part 1: Transport and cargo of module packaging units

TS EN 61400-27-1 Wind turbines - Part 27-1: Electrical simulation models - Wind Turbines

Energy efficiency and renewable energy sources - Common international terms - Part 13273: Energy efficiency TS EN ISO / IEC 1-1

Energy efficiency and renewable energy sources - Common international terms - Part 13273: Renewable energy sources TS EN ISO / IEC 2-2

TS ISO 15550 Internal Combustion Engines - Method and Determination for Measuring Engine Power - General Requirements

TS EN 62446-1 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: grid connection systems - documentation for control and test commissioning

TSE K 520 BIOMASS ENERGY BASED COGENERATION AND TRIGENERATION SYSTEM ENERGY GENERATION PLANT

TS HD 60364-7-712 Electrical installation in buildings - Part 7-712: Requirements for special installations and locations - Solar photovaltaic (pv) power supply systems

TS EN 12953-3 Cylindrical boilers - Part 3: Design and calculation of pressurized parts

TS EN 125 + A1 Flame monitoring devices for gas appliances - Thermo-electric flame monitoring devices

Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 17827: Vibrating sieving method using sieves with mm or smaller mesh

Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 17827: Oscillating sieving method using mesh screens of mm and larger

TS EN ISO 17830 Solid biofuels - Determination of particle size distribution of shredded pellets

TS EN 1397 / AC Heat exchangers - Heater / cooler (fan coil) units - Water - Test methods for performance determination of fans

TS EN ISO 8528-13 Alternating current generator sets driven by reciprocating internal combustion engine - Part 13: Safety

TS EN 61215-1-1 Terrestrial photovoltaic (PV) modules - Design competence and type approval - Part 1-1: special requirements for testing crystalline silicon photovoltaic (PV) modules

Measurement procedures for materials using photovoltaic modules - Part 62788-1: Volume resistance measurement of encapsulants - photovoltaic encapsulants and other polymeric materials TS EN 2-1-2

TS EN 16825 Refrigerated storage cabinets and counters for professional use - Classification, requirements and test conditions

TS EN ISO 16994 Solid biofuels - Determination of total sulfur and chloride content

TS EN ISO 18846 Solid biofuels - Determination of fine grain content in pellets

TS EN ISO 18847 Solid biofuels - Determination of grain density of pellets and briquettes

Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 15366: Samples containing plutonium and milligrams in the microgran range

Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 15366: samples containing plutonium and uranium in and below the nanogram range

TS EN ISO 15646 re-sintering test for UO2, (U, Gd) O2 and (U, Pu) O2 pellets

TS EN 61227 Nuclear power plants - Control rooms - Operator controls

TS EN 62282-3-200 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance testing methods

TS EN 378-1 Cooling systems and heat pumps - Safety and environmental regulations - chapter 1: Basic rules, recipes, classification and selection criteria

TS EN 378-2 Cooling systems and heat pumps - Safety and environmental regulations - Part 2: Design, construction, testing, marking and documentation

TS EN 378-3 Cooling systems and heat pumps - Safety and environmental regulations - Part 3: Plant location and personnel protection

TS EN 378-4 Cooling systems and heat pumps - Safety and environmental regulations - Part 4: Operation, maintenance, repair and recovery

TS EN 12178 Cooling systems and heat pumps - Liquid level devices - Rules, tests and marking

TS EN 13215 Condensers for refrigerants - Value requirements tolerances and manufacturer's performance information

TS EN 13771-1 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors

TS EN ISO 8528-13 Alternating current generator sets driven by reciprocating internal combustion engine - Part 13: Safety

61400-12-2: 2013 / AC Wind turbines - Part 12-2: Power performance based on the anemometry of electricity generating wind turbines

TS EN ISO 22975-1 Solar energy - Collector components and supplies - Part 1: Vacuum tubes - Durability and performance

TS EN ISO 22975-2 Solar energy - Collector components and materials - Part 2: Heat pipes for solar heating applications - Durability and performance

TS EN 60904-3 Photovoltaic Devices - Section 3: Measurement principles for terrestrial photovoltaic (PV) solar devices using reference spectral radiation data

TS EN 60965 Nuclear power plants - Control rooms - Support control rooms for closing the reactor without accessing the main control room.

TS EN 62808 Nuclear power plants-Important devices and control systems for safety-Design and adequacy of insulation devices

TS EN 16723-1 Natural gas and biomethanes used in transport and biomethane injected into the natural gas system - Part 1: Specification for biomethane injected into the natural gas system

TS EN 12976-1 Thermal Solar Systems and Components - Series Manufactured Systems - Part 1: General Requirements

TS EN 12976-2 Thermal Solar Systems and Components - Serial Production Systems - Part 2: Test Methods

TS EN 62282-6-200 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance testing methods

TSE CLC / TR 50670 External fire exposure to roofs with photovoltaic (PV) arrays - Test method (s)

TS EN 61215-1 Terrestrial photovoltaic (PV) modules - Design capability and type approval - Part 1: Test requirements

TS EN 61853-2 Photovoltaic (PV) module performance test and energy rating - Part 2: Spectral response, incidence angle and module operating temperature measurements

TS EN 62108 Concentrator photovoltaic (CPV) modules and assemblies - Design competence and type approval

TS EN 62788-1-4 Measurement procedures of materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of solar weighted photon transmittance, jaundice index and UV cut-off wavelength

TS EN 62788-1-5 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of the change in linear dimensions of the layered encapsulation material due to applied thermal conditions

TS EN 16147 Air conditioners, liquid cooling units and heat pumps-Electrical heat driven heat pumps-Test, characteristics and marking of domestic hot water preparation units

TS EN 15502-2-1 + A1 Gas-fired central heating boilers - Part 2-1: Specific standards for Type C devices and devices of the type B1.000, B2 and B3 not exceeding 5 kW of nominal heat input

Solid biofuels - Determination of moisture content - Drying method in the oven - Part 18134: Total moisture - Simplified method (EN ISO 2-2: 18134) TS EN ISO 2-2017

TS EN 16905-1 Gas-driven endothermic motor-driven heat pumps - Part 1: Terms and definitions

TS EN 16905-3 Gas-driven endothermic motor-driven heat pumps - Part 3: Test conditions

TS EN 16905-5 Gas-driven endothermic motor-driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode

TS EN 16905-4 Gas-driven endothermic motor-driven heat pumps - Part 4: Test methods

TS EN 267 / tst T1 Burners, forced draft, for liquid fuel - Recipes, specifications, tests and marking

TS EN 299 Liquid fuel spray nozzles - Determination of pressure, angle and spray angle and spray characteristics

TS EN 305 Heat exchangers - Performance descriptions and general test procedures for determining performance

TS EN 306 Heat exchangers - Methods for measuring the parameters required for performance determination

TS EN 307 Heat exchangers - Guidelines for the preparation of installation, operation and maintenance instructions necessary to ensure continuity of performance

TS 377-8 EN 12953-8Cylindrical boilers - Part 8: Characteristics of overpressure safety devices

TS 377-10 EN 12953-10 Cylindrical boilers - Part 10: Specifications for feed water and boiler water quality

TS 389 EN ISO 8497 Thermal insulation - Determination of steady state thermal conduction properties of thermal insulation for round pipes

TS EN 676 + A2 / tst AC Burners - Automatic Blowing - for gas fuels

TS EN 1117 Heat exchangers - Liquid cooled refrigerant condensers - Test methods for determining performance

TS EN 1117 / A1 Heat exchangers - Liquid cooled refrigerant condensers - Test methods for determining performance

TS EN 1118 / A1 Heat exchangers - Liquid refrigerants with refrigerant cooling - Test methods for the determination of performance

TS ISO 2261 Internal combustion engines with reciprocating movement - Hand operated controls - Standard direction of movement

TS EN 1216 Heat exchangers - Forced circulation, air heating and air cooling coils - To provide performance - Test procedures

TS EN 1679-1 + A1 Internal combustion engines - Traveling and moving - Safety - Part 1: Compression-ignition engines

TS EN 1736 Cooling systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Specification, design and installation

TS EN 1854 / A1 Pressure sensing devices - for gas burners and gas appliances

TS EN 1861 Cooling systems and heat pumps - System flow diagrams, diagrams for piping devices - Circuit and symbols

TS EN 3781 Aviation series - Guide grooves for spiral wound retaining rings - Design standard

TS EN ISO 3977-5 Gas turbines - Supply - Section 5: Applications in the oil and gas industry

TS EN ISO 3977-5 / AC Gas turbines - Supply - Section 5: Applications in the oil and gas industry

TS 5320 ISO 9846 Calibration of a pyranometer using solar power pyhelometer

TS EN ISO 7345 Thermal insulation - Physical quantities and recipes

TS ISO 8178-6 (Ex: TS EN ISO 8178-6) Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Measurement results and test report

TS ISO 8178-3 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 3: Definitions and methods for measuring exhaust gas fumes in steady state

TS EN ISO 8497 Thermal insulation - Determination of steady state thermal conduction properties of thermal insulation for round pipes

TS ISO 8690 Cleaning of radioactive contaminated surfaces - Method for testing and evaluation of ease of cleaning

TS ISO 9006 Metallic uranium and uranium dioxide powder and pellets - Determination of nitrogen content - Ammonia sensitive electrode method

TS ISO 9060 Specification and classification of measuring instruments for the measurement of solar hemispherical and direct solar radiation

TS EN ISO 9229 Thermal insulation - Terms and definitions

TS ISO 9271 Cleaning of radioactive contaminated surfaces - Testing of cleaning agents for textiles

TS ISO 9279 Uranium dioxide pellets - Determination of density and total porosity - Mercury displacement method

TS ISO 9459-1 Solar heating-Residential water heating systems-Part 1: Performance evaluation using indoor test methods

TS ISO 9459-2 Solar energy-Residential water heating systems-Part 2: Annual performance estimation of solar performance only systems and outdoor test method for system performance characteristics

TS EN ISO 9488 Solar energy - Terms and definitions

TS ISO 9553 Preformed rubber based sealing elements used in solar collectors- Test methods

TS ISO 9808 Solar water heaters - Elastomeric materials for absorbers, connecting pipes and fittings - Evaluation method

TS ISO 9845-1 Solar energy - On earth - Under different receiving conditions - Reference solar spectral radiation - Part 1: Direct normal and hemispherical radiation for 1,5 air absorption coefficient

TS ISO 9847 Calibration of solar-field pyranometers by comparison with a reference pyranometer

TS ISO 9889 Determination of carbon content in uranium dioxide powder and sintered pellets- Resistance burning furnace- Titrimetric / coulometric / infrared absorption

TS ISO 9891 determination of carbon content in uranium dioxide powder and sintered pellets- High frequency induction combustion furnace- Titrimetric / kulumetrik / infrared absorption method

TS ISO 9892 Uranium metal - Uranium dioxide powder and pellets and uranyl nitrate solutions - Determination of fluorine content - Fluoride ion selective electrode method

TSE ISO / TR 9901 Solar energy-Field pyranometers-Recommended applications

TS ISO 9978 Radiation protection - Sealed radioactive sources - Leak detection test methods

TS ISO 10054 Internal combustion compression-ignition (diesel) engines - Smoke meters from steady-state engines - Filter type smoke meter

TS EN 10090 Valve steels and alloys for internal combustion engines

TS EN ISO 10270 Corrosion of metals and alloys - Water corrosion test of zirconium alloys used in nuclear power reactors

TS EN ISO 10437 Plumbing - Fittings for bendable metal pipes

TS ISO 10648-1 Enclosures - Part 1: Design principles

TS ISO 10648-2 Enclosures - Part 2: Sealing classification and related control methods

TS ISO 10980 Verification of concentration of reference solutions used in concentration measurements

TS ISO 10981 Determination of uranium in solvent solution of re-treatment plant-Liquid chromatography method

TS ISO 11042-1 Gas turbines - Exhaust gas emissions - Part 1: Measurement and evaluation

TS ISO 11042-2 Gas turbines - Exhaust gas emissions - Part 2: Automatic monitoring of emissions

TS ISO 11086 Gas turbines - Terms and definitions

TS EN ISO 11102-1 Engines with internal combustion reciprocating gear - Manual starting equipment - Part 1: Safety rules and tests

TS EN ISO 11102-2 Internal combustion piston engines - Manual starting equipment - Part 2: Electrotechnical components - General requirements

TS ISO 11482 Guide to sampling plutonium dioxide (puo2) in a nuclear reprocessing plant

TS ISO 11597 Verification of uranyl or plutonium nitrate solution samples - with density measurements

TS ISO 11598 Rules for the sampling of representative uranyl nitrate solutions for the determination of uranium concentration

TS ISO 11614 Compression-ignition internal combustion piston engines - Devices for measuring the opacity of exhaust gases and determining light absorption coefficients

TS ISO 11841-1 Road vehicles and internal combustion engines - Terms related to filters - Part 1: Description of filters and filter components

TS ISO 11841-2 Road vehicles and internal combustion engines - Terms related to filters - Part 2: Descriptions of filter and filter components properties

TS EN 12263 Cooling systems and heat pumps - Safety switching devices for pressure limitation - Features and tests

TS EN 12300 Cryogenic tanks - Cleaning for cryogenic use

TS EN 12514-1 Liquid fuel burners - Equipment for fuel supply systems - Part 1: Safety rules and tests - Parts, fuel feed pumps, control and safety devices, supply tanks

TS EN 12514-2 Liquid fuel burners - Equipment for fuel supply systems - Part 2: Safety rules and tests - Parts, valves, pipes, filters, meters

TSE ISO / TR 12596 Solar heating-Swimming pools heating systems- Sizing, design and installation guide

TS EN 12693 Refrigeration systems and heat pumps - Safety and environmental regulations - Positive displacement refrigeration compressors

TS ISO 12803 Representative sample from plutonium nitrate solutions for determination of plutonium concentration

TS ISO 12807 Safe handling of radioactive materials - leakage tests on packagings

tst EN 12952-5 Water pipe boilers and auxiliary equipment - Part 5: Workmanship and manufacture of pressure parts of the boiler

TS EN 12952-8 Water pipe boilers and auxiliary installations - Part 8: Characteristics of the combustion systems of liquid and gas fuel boilers

TS EN 12952-9 Water pipe boilers and auxiliary installations - Section 9: Properties of pulverized solid fuel combustion systems

TS EN 12952-10 Water tube boilers and auxiliary installations - Part 10: Overpressure protection rules

TS EN 12952-11 Water tube boilers and auxiliary installations - Part 11: Specification for limiting devices of boilers and accessories

TS EN 12952-14 Water tube boilers and auxiliary installations - Part 14: Properties of denox systems for flue gas using pressurized ammonia and ammonia-water solutions

TS EN 12952-15 Water tube boilers and auxiliary installations - Part 15: Acceptance test

TS EN 12953-9 Cylindrical boilers - Part 9: Specification for limiting devices for boilers and accessories

TS EN 13313: 2010 Cooling systems and heat pumps - Qualification of personnel

TS EN 13487 Heat exchangers - Forced convection air-cooled refrigerant condensers and dry coolers - Sound measurement "

TS EN ISO 13706 Oil and gas industry - Air-cooled heat exchangers

TS EN 14222 Boilers with stainless steel body

TS EN 14705 Heat exchangers - Method of measurement and evaluation of thermal performance in wet cooling towers

TS EN ISO 16812 Oil and gas industry - Shell and tube heat exchangers

TS ISO 19013-1 Rubber hoses and tubes for fuel systems in internal combustion engines - Specifications - Part 1: Diesel fuels

TS ISO 19013-2 Rubber hoses and pipes for fuel systems in internal combustion engines - Specifications - Part 2: Petrol fuels

TS EN 45510-2-2 Power station equipment supply guide section 2-2: Electrical equipment - Uninterruptible power supply

TS EN 45510-2-3 Power plant equipment purchase guide section 2-3: Stabilizing batteries and loads

TS EN 45510-2-4 Power plant equipment purchase guide section 2-4: Electrical equipment - High-power static converters

TS EN 45510-2-5 Power plants - Supply guide for equipment - Part 2-5: Electrical equipment, motors

TS EN 45510-2-6 Power plant equipment purchase guide section 2-6: Electrical equipment - Generators

TS EN 45510-2-7 Guidance on the provision of power station equipment - Part 2-7: Electrical equipment - Switchgear and control device

TS EN 45510-3-3 Power plants - Supply guide for equipment - Part 3: Boilers - Part 3: Fluidized bed boilers

TS EN 45510-4-3 Power plants-Supply guide for equipment-Section 4: Boiler ancillary plants-Section 3: Ventilation equipment

TS EN 45510-4-4 Power plants - Supply guide for equipment - Part 4-4: Boiler auxiliary equipment, fuel preparation equipment

TS EN 45510-4-5 Power plants - Supply guide for equipment - Part 4-4: Boiler auxiliary equipment, coal handling and mass storage facility

TS EN 45510-4-6 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 6: Equipment for the removal of flue gas from sulfur oxides (sox)

TS EN 45510-4-9 Power plants-Supply guide for equipment-Part 4-9: Boiler ancillary plants-Soot blowers

TS EN 45510-5-4 Power plants-Supply guide for equipment-Section 5-4: Water turbines, piston pumps and turbo pumps

TS EN 45510-6-2 Power plants-Supply guide for equipment-Section 6-2: Turbine auxiliary devices-Feed water heaters

TS EN 45510-6-5 Power station equipment supply guide - Section 6-5: Turbine aids - Dry cooling systems

TS EN 45510-6-6 Supply of power station equipment - Part 6-6: Turbine aids - Wet and wet / dry cooling towers

TS EN 45510-6-9 Power station equipment supply guide - Section 6-9: Turbine aids - Cooling water systems

TS EN 45510-7-1 Power plants-Supply guide for plants, equipment and systems-Section 7-1: Plumbing and valves-High pressure pipe systems

TS EN 45510-6-4 Power plants - Supply guide for equipment part 6-4: Turbine auxiliary devices - Pumps

TS EN 45510-6-7 Power plants - Supply guide for equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheater

TS EN 45510-6-8 Power plants - Supply guide for equipment section 6-8: Turbine aids - Cranes

TS EN 45510-7-2 Power plants - Supply guide for plants, equipment and systems - Part 7-2: Plumbing and valves - Boiler and high pressure piping valves

TS EN 45510-4-10 Power plants-Supply guide for equipment-Section 4-10: Boiler ancillary plants-Equipment for the removal of flue gas from nitrogen oxides

TS EN 50530 Total efficiency of grid-connected photovoltaic converters

TS EN 50564: 2011 Electrical and electronic home and office equipment - Measurement of low power consumption

TS EN 60041 Site acceptance tests for the determination of hydraulic performance of hydraulic turbines, storage pumps and turbine-pumps

TS EN 60193 Hydraulic turbines, storage pumps and pump turbines - Acceptance test model

TS EN 60308 Hydraulic turbines - Tests for control systems

TS EN 60609-2 Evaluation of cavitation cavities in hydraulic turbines, storage pumps, pumps - Turbines - Part 2: Pelton - Evaluation in turbines (ic 60609-2: 1997)

TS EN 60709 Nuclear power plants - Important instrumentation and control system for safety -Separation

TS EN 60880 Nuclear power plants - Important instrumentation and control systems for safety - Software aspects for computer-based systems that perform Category a functions

TS EN 60891 Photovoltaic elements - Processes for temperature and light intensity correction measured in IV characteristics

TS EN 60904-4 Photovoltaic elements - Part 4: Reference solar elements - Procedures for establishing calibration traceability

TS EN 60904-7: 2009 Photovoltaic elements - Part 7: Calculation of the discrepancy of the resulting spectra in the experiments of photovoltaic elements

TS EN 60904-1 Photovoltaic elements section 1: Measurement of photovoltaic current-voltage characteristics

TS EN 60904-5: 2011 Photovoltaic elements-Section 5: Open circuit voltage method to determine the equivalent cell temperature of photovoltaic elements

TS EN 60904-10 Photovoltaic devices-Section 10: Linearity measurement methods

TS IEC 60910 Enclosure monitoring instrumentation for early detection of deviation from normal operation in light water reactors

TS EN 60953-1 Steam turbines-Thermal acceptance tests-Part 1: Method a- High sensitivity in condensing large steam turbines (ie 953-1: 1990)

TS EN 60953-2 Steam turbines - Thermal acceptance tests - Part 2: Method b - Wide range of sensitivity for turbines of various types and sizes

TS EN 60964 Nuclear power plants - Control rooms - Design

TS EN 61064 Acceptance tests of speed control systems of steam turbines

TS EN 61116 Guide for electromechanical equipment in small hydropower plants

TS IEC 61151 Nuclear instrumentation-Amplifiers and pre-amplifiers used with ionizing radiation detectors- Test methods

TS EN 61194 Characteristic parameters of photovoltaic systems alone

TS IEC 61224 Nuclear reactors - Response time in resistive temperature detectors (dsd) - On-site measurements

TS EN 61226 Nuclear power plants - Important instrumentation and control for safety - Classification of instrumentation and control functions

TS EN 61345 UV (ultraviolet) test of photovoltaic (fv) units

TS EN 61400-1 Wind turbines - Part 1: Design guidelines

TS EN 61400-3 Wind turbines - Part 3: Design rules for offshore wind turbines

TS EN 61400-22 Wind turbines - Part 22: Conformity test and certification

TS EN 61400-21 Wind turbines - Part 21: Measurement and evaluation of power quality characteristics in grid-connected wind turbines

TS EN 61400-25-5 Wind turbines - Part 25-5: Communication on control and monitoring of wind power plants - Conformity test

TS EN 61646 Thin film flat field photovoltaic modular - Design characteristics and type approval

TS EN 61683 Photovoltaic systems - Power conditioners - Efficiency measurement

TS EN 61702 Classification of direct-connected photovoltaic pumping systems (IEC 61702: 1995)

TS EN 61725 Analytical expression of daily solar profiles

TS EN 61829 Photovoltaic silicon crystal array - Instead of I-V characteristic measurement

TS IEC 61976 Nuclear instrumentation spectrometry-Hpge gamma rays spectrometry

TS EN 62093 System balance components for solar cell systems - Design specification natural environments "

TS EN 62138 Nuclear power plants - Important instrumentation and control for safety - Software features for computer aided systems performing Category b and c functions

TS EN 62256 Hydraulic turbines, tank pumps and pump turbines - Improvement and performance improvement

TS EN 62270 Hydropower automation - Guide for computer-based control

TS EN 62282-6-100 Fuel cell technology - Part 6-100: Micro fuel cell power systems - Safety

TS EN 62340 Nuclear power plants - Important instrumentation and control system for safety - Features for copying with common target error (ccf)

TS EN 62509: 2011 Battery charge controllers for photovoltaic systems - Performance and functionality