Capacitors Standards

Our Company capacitor the System Tests field shown below All standards are tested, audited and certified professionally.

TS EN 137000 General specifications: Non-solid electrolyte fixed aluminum electrolytic alternating current capacitors used in motors

TS EN 137100 Part features: Quality approval of non-solid electrolyte fixed aluminum electrolytic alternating current capacitors for motor starting applications

TS EN 137101 Blank detail specification for non-solid electrolyte, fixed, aluminum electrolytic alternating current capacitors used in motor starting applications

TS EN 60931-2 Capacitors - Non-repairable shunt power capacitors for alternating current systems with rated voltage up to and including 1 kv section 2: Aging and damage test

TS EN 60931-3 Capacitors - Non-repairable shunt power capacitors for alternating current systems with rated voltage up to and including 1 kv - Part 3: Internal fuses

TS EN 61270-1 Condensers for microwave ovens - Part 1: General

TS 3558 EN 60110-1 Power capacitors for induction heating systems - Part 1: General

TS EN 60931-1 Capacitors - Non-repairable shunt power capacitors for alternative current systems with rated voltage up to and including 1 kv section 1: General - Performance, tests and declaration values - Safety regulations - Plant and operating instructions

TS EN 130102 Gap detail specification standard - Constant polyethylene for direct current - Terephtolate film dielectric metal sheet capacitors - E2 - Rating level

TS EN 61270-1 Capacitors for microwave ovens - part 1: General

TS EN 61921 Power capacitors - Low voltage power factor correction groups

TS EN 61921 Power capacitors - Low voltage power factor correction sets

TS EN 61071 Capacitors for power electronics

TS EN 60384-4-2 Capacitors - Used in electronic equipment -Fixed- Part 4-2: Blank detail specifications- Solid (MnO2) electrolyte aluminum electrolytic capacitors- Rating level EZ

TS EN 60384-4-1 Capacitors - Used in electronic devices - Fixed - Part 4-1: Blank detail specifications - Aluminum electrolytic capacitors with non-solid electrolyte - Rating level EZ

TS EN 61048 Auxiliary equipment for lamps - Capacitors - Used in tubular fluorescent and other discharge lamps - General and safety features

TS EN 61048 Auxiliary equipment for lamps - Capacitors for use in tubular fluorescent and other discharge lamps - General and safety regulations

TS EN 60384-11 Stationary capacitors used in electronic equipment - Part 11: Part property standard - Capacitors in fixed polyethylene terephthalate film dielectric metal foil

TS EN 60384-11-1 Stationary capacitors used in electronic equipment - Part 11-1: Blank detail specification standard - Fixed polyethylene terephthalate film dielectric metal foil capacitors - Rating level cr

TS EN 60384-24-1 Stationary capacitors used in electronic equipment - Part 24-1: Blank detail specification standard - Surface mounted fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Rating level ez

TS EN 62391-2-1 Stationary electrical double layer capacitors used in electronic devices - Part 2-1: Blank detail feature - Electrical double layer capacitors for power applications - Ez rating levels

TS EN 60384-20-1 Fixed capacitors used in electronic equipment - Part 20-1: Standard of empty detail specification - Fixed metallic polyethylene sulfide film dielectric surface mounted capacitors - Rating level cr

TS EN 60384-26-1 Capacitors-Fixed section used in electronic devices 26-1: Empty detail characteristics: Constant aluminum electrolytic capacitors with conductive polymer solid electrolyte-Ez limit evaluation

TS EN 60384-26 Capacitors - Fixed section used in electronic devices 26-1: Blank detail characteristics: Constant aluminum electrolytic capacitors with conductive polymer solid electrolyte

60252-1: 2011 Capacitors - Part for AC motors 1: General; Performance, tests and declaration values-Safety rules-Guide for installation and operation

60252-2: 2011 Aa motor capacitors - Part 2: Motor starting capacitors

TS EN 60252-1 Capacitors - for AA motors - part 1: General; Performance, tests and declaration values - safety regulations - Guidelines for installation and operation

TS EN 60252-2 Capacitors - for AA motors - Part 2: Motor starting capacitors

TS EN 62490-1 ESL measuring method - Part 1: Capacitors with polar terminals for use in electronic equipment

TS EN 62490-2 ESL measuring method - Part 2: Surface-mounted capacitors intended for use in electronic equipment

TS EN 60143-4 Series capacitors - For power systems - Part 4: Thyristor controlled series capacitors

TS HD 525.2 S1: 1989 / A1 Shunt capacitors for aa power systems above beyon voltage 660 v section 2: Endurance test

TS EN 60384-2 Stationary capacitors for electronic devices - Part 2: Part features: Constant, metal coated polyethylene terephthalate film dielectric direct current capacitors

TS EN 60384-13 Stationary capacitors for electronic devices - Part 13: Part features - Direct current (da) capacitors with fixed, metal sheet polypropylene film dielectric

TS EN 60384-21 Stationary capacitors for electronic devices - Part 21: Part feature standard: Class 1 ceramic dielectric fixed surface mounted multilayer capacitors

TS EN 60384-22 Stationary capacitors for electronic devices - Part 22: Part feature standard: Class 2 ceramic dielectric fixed surface mounted multilayer capacitors

TS EN 60301 Preferred leg diameters for wire leg resistors and capacitors

TS EN 61881-2 Railway applications - Railway vehicles - Capacitors for power electronics - Section 2: non-solid electrolyte aluminum electrolytic capacitors

TS EN 61881-3 Railway applications - Railway vehicles - Capacitors for power electronics - Section 3: double layer electrical capacitors

TS EN 60717 Method for determining the required area of capacitors and resistors with one-way terminations

TS EN 60358-1 Connection capacitors and capacitor dividers-Section 1: General rules

TS EN 60252-2: 2011A.a. motor capacitors - Part 2: Motor starting capacitors

TS EN 60143-2 Series capacitors - for power systems - Part 2: Protective equipment for series capacitor batteries

TS EN 60358-2 Connection capacitor and capacitor dividers - Part - 2: AA or DA, Single-phase, grid-frequency, connected between ground and phase, connection capacitor (PLC) application

TS EN 60252-2 / A1 Capacitors - for AA motors - Part 2: Motor starting capacitors

TS EN 60252-1 / A1 Capacitors - for AA motors - part 1: General; Performance, tests and declaration values - safety regulations - Guidelines for installation and operation

TS EN 60384-14 Stationary capacitors for electronic devices - Part 14: Part features - Stationary capacitors for electromagnetic interference suppression and connected to the supply network

TS EN 62146-1 Leveling capacitors for high voltage alternating current circuit breakers

TS EN 60831-1 Self-repairing shunt power capacitors for aa systems with rated voltage up to and including 1000 V. - Part 1: General - Performance, tests and declaration characteristics - Safety regulations - Guidelines for plant and operation

TS EN 60831-2 Self-repairing shunt power capacitors for aa systems with rated voltage up to and including 1000 V - Part 2: Aging test, self-repair test and destruction test

TS EN 60871-4 Shunt capacitors for aa power systems with rated voltages higher than 1000 V. - Part 4: Internal fuses

TS EN 60871-1 Capacitors - Shunt capacitors for aa power systems with rated voltage above 1000 V. - Part 1: General

TS EN 60831-1 Self-repairing shunt power capacitors for aa systems with rated voltage up to 1000 V (including 1000 V) - Part 1: General - Performance, tests and declaration characteristics - Safety regulations - Guidelines for installation and operation IEC 60831-1: 2014) 19.03.2015

TS EN 60252-1 / A1 Alternating current motor capacitors - Part 1: General - Performance, tests and declaration values - Safety regulations - Guidance on installation and use

TS EN 60252-2 / A1 Alternating current motor capacitors - Part 2: Motor starting capacitors (IEC 60252-2: 2010 / A1: 2013)

tst EN 60358-2 Connection capacitor and capacitor dividers - Part - 2: AA or DA, Single-phase, grid-frequency, connected between ground and phase, connection capacitor (PLC) application IEC 60358-2: 2013)

TS EN 60831-2 Self-repairing shunt power capacitors for aa systems with rated voltage up to 1000 V (including 1000 V) - Part 2: Aging test, self-repair test and destruction test (IEC 60831-2: 2014)

TS EN 60871-1 Shunt capacitors for aa power systems with rated voltage above 1000 V. - Part 1: General (IEC 60871-1: 2014)

TS EN 60871-4 Shunt capacitors for aa power systems with rated voltage above 1000 V. - Part 4: Internal fuses (IEC 60871-4: 2014)

tst EN 62146-1 Leveling capacitors for high voltage alternating current circuit breakers

TS EN 62813 Lithium ion capacitors for electrical and electronic equipment - Test methods for electrical characteristics

TS EN 60358-1 / AC Connection capacitors and capacitor dividers-Section 1: General rules

TS EN 60831-1 / AC Self-repairing shunt power capacitors for aa systems with rated voltage up to 1000 V (including 1000 V) - Part 1: General - Performance, tests and declaration characteristics - Safety requirements - For installation and operation guide

TS EN 60143-3 Series capacitors intended for grid installation - Part 3: Internal fuses

TS EN 60143-1 Series capacitors intended for grid installation - Part 1: General

TS EN 62391-1 Stationary electrical double-layer capacitors for electrical and electronic equipment Part 1: General standard

TS EN 60384-20 Constant capacitors used in electronic devices - Part 20: Part features: Surface-mounted direct current (da) capacitors with fixed metal-coated polyphenylene sulfur film

TS EN 60384-24 Stationary capacitors used in electronic equipment - Part 24: Part specification standard - Surface mounted fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte

TS EN 60384-25 Stationary capacitors used in electronic equipment - Part 25: Part specification standard - Surface mounted fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte

TS EN 60384-19 Stationary capacitors for use in electronic equipment - Part 19: Part specification standard: Fixed metallic polyethylene terephthalate film condensers attached to a dielectric surface

TS EN 61048 / A1 Auxiliary equipment for lamps - Capacitors - Used in tubular fluorescent and other discharge lamps - General and safety features

TS EN 60384-14 / AC Stationary capacitors for electronic devices - Part 14: Part features - Stationary capacitors for electromagnetic interference suppression and connected to the supply network

TS EN 60384-14-1 Stationary capacitors used in electronic devices - Part 14-1: Blank detail feature: Stationary capacitors used in electromagnetic interference suppression and connected to the supply network - Rating level d

TS EN 60384-14-2 Stationary capacitors for electronic devices - Part 14-2: Standard of empty specification: Fixed capacitors for electromagnetic interference suppression and connection to mains - Safety tests only

TS EN 62146-1 / A1 Leveling capacitors for high voltage alternating current circuit breakers

TS EN 60384-1 Constant capacitors for electronic equipment Part 1: General specifications

TS EN 60384-18 Stationary capacitors for electronic equipment Part 18: Part features - Fixed aluminum electrolytic surface mounted capacitors, solid (MnO2) and non-solid electrolyte

TS EN 60384-3 Stationary capacitors for use in electronic equipment - Part 3: Part features - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte

TS EN 60384-4 Fixed capacitors for use in electronic equipment - Part 3: Part features - Solid aluminum electrolytic capacitors with solid (MnO2) and non-solid electrolyte

TS EN 60384-14 / A1 Fixed capacitors for electronic devices - Part 14: Part features - Fixed capacitors for electromagnetic interference suppression and connected to the supply network

TS EN 62391-1 / AC Stationary electrical double-layer capacitors for electrical and electronic equipment Part 1: General standard

TS EN 60384-24 / AC Stationary capacitors used in electronic equipment - Part 24: Part specification standard - Surface mounted fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte

TS 3769 EN 130200 Part features - Solid tantalum capacitors with solid and non-solid electrolyte

TS EN ISO 15061 Water quality-Determination of dissolved bromate-Determination of ions by liquid chromatography

TS EN 60384-23 Stationary capacitors for electronic devices - Part 23: Part feature standard: Metallic polyethylene naphthalate film dielectric condensers in fixed surfaces

TS EN 60384-9-1 Stationary capacitors used in electronic devices - Part 9-1: Empty detail specification standard: Class 2 ceramic dielectric fixed capacitors ez rating level

TS EN 60384-22-1 Stationary capacitors for use in electronic equipment - Part 22-1: Standard of empty detail specification: Class 2, multi-layer capacitors fitted on a ceramic dielectric fixed surface - Ez rating

TS EN 60384-3-1 Capacitors - Fixed section used in electronic devices 3-1: Empty detail characteristics: Fixed, tantalum broken (chip) capacitors rating level e.

TS EN 60384-8 Stationary capacitors used in electronic devices - section 8: Section characteristics: Ceramic dielectric stationary capacitors, class 1

TS EN 60384-9 Stationary capacitors used in electronic devices - Part 9: Part specifications: Ceramic dielectric fixed capacitors, class 2

tst EN 60384-20 stationary capacitors used in electronic equipment - Part 20: Part features: Fixed metallized polyphenylene sulfur film dielectric surface mounted capacitors

TS EN 60384-23-1 Stationary capacitors used in electronic devices - Part 23-1: Standard of empty specification: Capacitors in metallic polyethylene naphthalate film dielectric installed on a fixed surface - Ez rating

TS EN 60384-13-1 Stationary capacitors for use in electronic equipment - Part 13-1: Standard of empty specification: Capacitors in fixed polypropylene film dielectric metal foil - E rating

TS EN 60384-14-3 Stationary capacitors used in electronic devices - Part 14-3: Standard of empty specification: Fixed capacitors and connection to mains for electromagnetic interference suppression - Level rating

TS EN 60384-16 Constant capacitors for electronic devices - Part 16: Part features: Constant, metal-coated polypropylene film dielectric direct current capacitors

TS EN 60384-17 Stationary capacitors used in electronic devices - Part 17: Part features: Alternating current (aa) and pulse capacitors with fixed, metal-coated polypropylene film dielectric

TS EN 60384-18-1 Capacitors -Fixed used in electronic devices- Part 18-1: Blank detail properties- Solid (mno <(index) 2>) electrolyte aluminum electrolytic surface mounted capacitors- Rating level ez

TS EN 60384-18-2 Capacitors - Used in electronic equipment -Fixed- Part 18-2: Blank detail specifications- Aluminum electrolytic surface mounted capacitors with non-solid electrolyte

TS EN 60384-19-1 Stationary capacitors for use in electronic equipment section 19-1: Standard of empty detail specification: Fixed metallic polyethylene terephthalate film condensers mounted on a dielectric surface - Ez rating level

TS EN 60384-2-1 Stationary capacitors for electronic devices - Part 2-1: Empty detail characteristics: Constant, metal-coated polyethylene terephthalate film dielectric direct current (da) capacitors - Rating levels e and ez

TS EN 60384-25-1 Stationary capacitors used in electronic equipment - Part 25-1: Blank detail specification standard - Surface mounted fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Rating level ez

TS EN 60384-16-1 Stationary capacitors used in electronic devices - Part 16-1: Blank detail specification standard: Capacitors in fixed metallic polypropylene film dielectric - E and ez rating level

TS EN 60384-8-1 Stationary capacitors used in electronic devices - part 8-1: Blank detail feature: Class 1, fixed capacitors with ceramic dielectric - Rating level ez

TS EN 60384-17-1 Stationary capacitors used in electronic devices - part 17-1: Empty detail characteristics: Constant, metal-coated polypropylene film dielectric alternating current (aa) and impact capacitors - rating levels e and ez

TS EN 60915 Fixed capacitors and resistors -Used in electronic devices-Single-bore, bushing-mounted shaft-Preferred sizes for electronic components

TS EN 61642 Industrial network networks affecting harmonics-Application of filters and shunt capacitors

TS EN 61881-1: 2011 Railway applications - Railway vehicles - Capacitors for power electronics - Section 1: Paper / plastic film capacitors

TS EN 62391-2 Stationary electrical double-layer capacitors used in electronic devices - Part 2: Combined features - Electrical double-layer capacitors for power applications

TS EN 62576 Electric double layer capacitors for hybrid electric vehicles - Test methods for electrical properties

TS EN 130100 Part feature: Dielectric metal sheet capacitors fixed in polyethylene-terephtalate film for direct current (dc)

TS EN 130101 Empty detail specification: Dielectric metal sheet capacitors for constant current (dc) for fixed polyethylene-terphtalate film -E level evaluation

TS EN 130201 + A2 Empty detail features: Fixed tantalum capacitors with solid electrolyte, porous anode (sub family 3)

TS EN 130202 Blank detail specifications - Non-solid electrolyte, fixed tantalum capacitors, porous anode

tst EN 131200 Part feature standard: Fixed capacitors with metallic electrodes and polyprolene dielectrics

TS EN 132102 Capacitors - Empty detail feature - Fixed multilayer ceramic - Surface mounting capacitors rating level "dz"

TS EN 134000 General specifications: Variable capacitors (quality approval and qualification approval)

TS EN 134100 Part features: Variable capacitors (quality approval)

TS EN 134101 Capacitors - Single turn disc trimer - Blank detail feature (approval of qualification)

TS EN 134102 Capacitors - Multi-turn concentric - Empty detail feature (approval of qualification)

TS EN 134103 Capacitors - Finned type air dielectric - Empty detail feature (approval of quality)

TS EN 134104 Capacitors - Compression type trimer - Blank detail feature (approval of quality)

Electromagnetic compatibility and radio spectrum issues (erm) - Technical characteristics and test methods for wireless microphones in the frequency range 300422 mhz to 1.2.1