By applying all technical tests related to the layout of electromechanical component systems used in electronic and telecommunication equipment, we carry out testing, inspection and certification processes by performing the tests specified in the following standards.
TS EN 60603-10 (Formerly: TS IEC 603-10) Connectors-Section used in printed circuit boards at frequencies below 3 mhz 10: Two-piece connectors used in 2,54 mm basic grid printed circuit boards reverse type
TS EN 60603-9 (Formerly: TS IEC 603-9) Connectors-3 two-piece connectors, back panels and cable connectors for frequencies below MHz, used in printed circuit boards
TS EN 60603-12 (Formerly: TS IEC 603-12) Connectors-Section used in printed circuit boards at frequencies below 3 mhz 12: Dimension, general specifications and detailed specifications for the group of female connectors designed for use in integrated circuits
TS EN 60603-13 (Formerly no: TS IEC 603-13) Connectors-For frequencies below 3 MHz, the group 13: used for printed circuit boards with a base grid of 2,54 mm cannot be accessed with a group of evaluated two-piece connectors of rated quality. detail specification for free connectors with insulating stripper terminals (ys)
TS EN 61319-1 + A11 Interconnection of satellite receivers - Part 1: Europe
TS EN 61076-4 Qualified connectors for direct current (da), low frequency analog and digital high speed data applications - Part 4: Partial specifications - Printed circuit connectors
TS EN 60512-16-20 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 16: Mechanical tests to be applied to contacts with terminals - Part 20: Test 16t: Mechanical durability ((wired terminals of solderless connections)
TS EN 61797-1 Transformers and coils for telecommunication and electronic devices - Intermediate dimensions of winding formers - Part 1: Winding formers for layered cores
TS EN 60512-23-3 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 23-3: Test 23c: Screening efficiency of connectors and accessories
TS EN 61076-7 Connectors - Used in low frequency analog and digital high speed data applications - Part 7: Quality approved non-cable installations - Includes quality and capability approval - Part specifications
TS EN 60512-6-4 Connectors for electronic devices-Tests and measurements-Section 6-4: Dynamic stress tests-Test 6d: Vibration (sinusoidal)
TS EN 60512-11-12 Connectors for electronic devices - Tests and measurements - Part 11-12. air conditioning experiments; Experiment 11m; Age, temperature, cyclic
TS EN 60512-11-2 Connectors for electronic devices-Tests and measurements-Section 11-2: Air conditioning tests-Test 11b: Combined consecutive cold, low air pressure and wet temperature test
TS EN 61076-2-102 Connectors for electronic devices - Part 2-102: Circular connectors with quality evaluation; Detail feature of plugs and jacks for external low fall supply
TS EN 61076-4-100 Connectors for electronic devices - Part 4-100 quality rated printed circuit connectors - Test feature for two-section connector modules with 2,5 mm grid for printed circuits and back sides
TS EN 61076-4-101 Connectors for electronic devices - Part 4-101 quality rated printed circuit connectors-Iec Detail specification for two-section connector modules with 60917 mm basic grating for 2,0-printed circuits and back sides
TS EN 60512-11-3 Connectors for electronic devices - Tests and measurements - Part 11-3: Air conditioning tests; Experiment 11c: Wet temperature, steady state
TS EN 60512-11-5 Connectors for electronic devices-Tests and measurements-Part 11-5: Air conditioning tests-Test 11e: Mold
TS EN 61076-4-107 Fasteners for electrical devices - Part 4-107: Quality-assessed printed plate fasteners - Two-piece fasteners for 2,0 mm basic screened shields with soldered and crimped inserts for printed boards with inaccessible insulating displacement and crimped ends Detail feature standard
TS EN 61076-4-108 Fasteners for electrical equipment - Part 4-108: Quality assessed printed plate fasteners - Integrated screening function for 60917 mm transverse package density with 1 mm grating according to IEC 2,5-15 and Detail specification standard for cable-to-plate connectors with 25 mm module bore arrangement
TS EN 61076-4-110 Connectors for electronic equipment - Part 4-110: Printed circuit connectors of evaluated quality; Detail feature for fully armored and locking cable tie with fastening function with a grid of at least 2 mm
TS EN 61076-4-111 Connectors for electrical equipment - Part 4-111: Quality-assessed printed plate connectors Two-part power for printed plates and backplanes with 60917 mm grating and quick-coupling according to IEC 1-2,5 Detail feature standard for connector modules
TS EN 60512-25-2 Connectors for electronic devices-Tests and measurements-Section 25-2: Test 25b: Attenuation (loss of insertion)
TS 11285 EN 60603-4 Connectors-for use on printed plates at frequencies below 3 mhz-Section 4: Two-piece connectors for printed plates with contacts between 1.91 mm (0.075 inches) between centers and in the same spacing
TS 11438 EN 60603-5 Connectors-3: used in printed plates at frequencies below MHz-Section 5: 2.54: end-socket and two-piece connectors for double-sided printed sheets with mm (0.1 inch) spacing
TS 11525 EN 60603-6 Connectors-for use on printed plates at frequencies below 3 mhz-Section: 6 mm (1.6 inch) contact spaced end socket connectors and single-sided contact plates for 0.063 mm (2.54 inch) rated thickness connectors
TS 11284 EN 60603-3 Connectors-3 for use on printed plates at frequencies below MHz-Section 3: Two-piece connectors for printed plates with contacts between 2,54 mm (0,100 inches) between centers and with the same spaced-apart termination
TS EN 122003 Blank detail specifications and capacity approval with standard specification for standard production for the preparation of customer detail specifications
TS EN 60352-7 Solderless connections - Part 7: Spring clamp connections - General rules, test methods and application guide
TS EN 60512-2-5 Connectors for electronic devices - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
TS EN 60512-4-1 Connectors for electronic devices - Tests and measurements - Part 4-1: Tensile strength tests - Test 4a: Voltage resistance
TS EN 60068-2-42 Environmental resistance tests - Part 2-42: Tests - Test kc: Sulfur dioxide test for contacts and connections
TS EN 60838-2-2 Lampholders - Miscellaneous - Part- 2-2: Related specifications - Connectors for light emitting diode modules
TS EN 61169-2 Radio-frequency connectors-Section 2: Section specification standard 9,52 type radio-frequency coaxial connectors
TS EN 61076-1 Qualified connectors for direct current (da), low frequency analog and digital high speed data applications - Part 1: General specifications
TS EN 61076-3-114Enconnectors for electronic equipment - Product rules - Part 3-114: Rectangular connectors - Iec 60603-7 series interface, for use in industrial environments 600 MHz armored or unshielded connectors - Specification for IEC 8-61076-3 106 - Type of spindle coupling
TS EN 60512-15-2 Connectors for electronic devices - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Retaining in the housing (axial)
TS EN 60603-7 Connectors for electronic devices - Part 7-1: Detail specification for 8-way, unshielded free and fixed connectors
TS EN 60603-7-41 Connectors for electronic devices - Part 7-41: 8-directional, unshielded free and fixed connectors and detail specification for data transmission at frequencies up to 500 MHz
TS EN 60512-19-1 Electromechanical components for electronic devices - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Liquid resistance of pre-insulated crimp tips
TS EN 61076-2-107: 2010 Connectors for electronic equipment - Product specifications - Part 2-107: Detailed specifications for fiber optic connected round hybrid m12 connectors with screw switches
TS EN 60603-7-3 Connectors for electronic devices - Part 7-3: 8-path, shielded free and fixed connectors and detail specification for data transmission at frequencies up to 100 mhz
TS EN 60603-7-5 Connectors for electronic devices - Part 7-5: 8-path, shielded free and fixed connectors and detail specification for data transmission at frequencies up to 250 mhz
TS EN 61076-3-001 Connectors for electronic devices - Product specifications - Part 3- 001: Rectangular connectors - Blank detail specifications
TS EN 60512-20-3 Connectors for electronic devices - Tests and measurements - Part 20-3: Fire hazard tests-Test 20c: Flammability, glow wire
TS EN 60512-21-1 Connectors for electronic devices - Tests and measurements - Part 21-1: Rfresistance tests-Test 21a: Rf shunt resistance
TS EN 60512-22-1 Connectors for electronic devices - Tests and measurements - Part 22-1: Capacitance tests-Test 22a: Capacitance
TS EN 60603-7-7: 2010 Connectors for electronic devices - Part 7-7: 600 Detail specification for 8 path, shielded, free and fixed connectors for data transmission with frequencies up to MHz
TS EN 61076-3-118 Connectors for electronic equipment - Product specifications - Part 3-118: Rectangular connectors - Detailed specification for 4 pole + pe power connector with push-pull connection "
TS EN 60512-8-1 Connectors for electronic devices - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
TS EN 60512-17-3 Connectors for electronic devices - Tests and measurements - Part 17-3: Cable clamp tests- Test 17c: Cable clamp resistance to cable pull
TS EN 60512-17-1 Connectors for electronic devices - Tests and measurements - Part 17-1: Cable clamp tests- Test 17a: Cable clamp strength
TS EN 60512-17-4 Connectors for electronic devices - Tests and measurements - Part 17-4: Cable clamp tests- Test 17d: Cable clamp resistance to cable torsion
TS EN 61076-3-115 Connectors for electronic equipment - Product specifications - Section 3-115: Rectangular connectors - For use with shielded or shielded 60603-way armored connectors for frequencies up to 7-mhz for industrial environments, including IEC 600-8 series interfaces Detail specifications related to housings-IEC 61076-3-106 variation associated with 12-Push-Pull type
TS EN 61169-18 Radio frequency connectors - Part 18: Part feature standard - Type ssma's radio-frequency uniaxial connectors
TS EN 61984 Connectors - Safety rules and tests
TS EN 61984 Connectors - Safety requirements and tests (IEC 61984: 2008)
TS EN 62047-8 Semiconductor circuits - Micro electromechanical devices - Part 8: Strip bending test method for measuring the elongation property of thin films
TS EN 60512-8-3 Connectors for electronic devices - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robust arm of the mechanism "
TS EN 60512-9-3 Connectors for electronic equipment - Tests and measurements - Part 9-3: Strength tests - Test 9c: Mechanical operation in electrical load (coupling / disconnecting)
TS EN 61076-2 Connectors for electronic devices - Finished goods - Part 2: Part specifications for circular connectors
TS EN 61076-2-106 Connectors for electronic devices - Product specifications - Part 2-106: Circular connectors - Detail specifications for m16x0,75 and ip40 or ip65 / 67 protection grade connectors with screw locking
TS EN 62047-5 Semiconductor circuits - Micro-electromechanical devices - Part 5: RF MEMS switches
TS EN 61076-2-001 Connectors for electronic devices - Product specifications - Part 2-001: Circular connectors; Blank detail feature
TS EN 62047-10Semi-conducting circuits - Microelectromechanical devices - Part 10: Measurement of elongation property of thin films for Mems materials
TS EN 60603-7 / tst A1 Connectors for electronic devices - Part 7: Detail specifications for 8-way, unshielded, free and fixed connectors
tst EN 60512-26-100 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for testers in accordance with IEC 60603-7, test and reference adjustments and measurements -26a to 26g
TS EN 60512-26-100 / tstA1 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for Iec 60603-7, test and reference adjustments and measurements - 26a to 26a
TS EN 60512-7-2 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
TS EN 60512-7-2 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
TS EN 60512-9-2 Connectors for electronic equipment - Tests and measurements - Part 9-2: Strength tests - Test 9b: Electrical load and temperature
TS EN 60512-27-100 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 mhz on Iec series connectors - 27a to 27g tests
TS EN 60512-1-100 Connectors for electronic devices - Tests and measurements - Part 1-100: General - Applicable standards
TS EN 60352-5 Solderless joints - Part 5: Printed joints - General rules, test methods and practical guide
TS EN 60603-7 / A1 Connectors for electronic devices - Part 7: Detail specifications for 8-way, unshielded, free and fixed connectors
TS EN 60512-99-001 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test program for insertion and removal of connectors under electrical load - Test 99a: Connectors used in remote twisted pair communication cabling
tst EN 61169-2 Radio-frequency connectors-Section 2: Section specification standard Radio-frequency coaxial connectors of type 9,52 (ic 61169-2: 2001)
TS EN 61076-2-101 Connectors for electronic devices - Part 2-101: Circular connectors - Detail specification standard for snap-locking m12 or screw-locking circular m8 connectors for low voltage applications
TS EN 60512-24-1 Connectors for electronic devices - Tests and measurements - Part 24-1: Magnetic interference test-Test 24a: Residual magnetism
TS EN 60512-16-21 Connectors for electronic devices - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test with external mechanical stress application
TS EN 61076-4-116 Connectors for electronic devices - Product specification - Part 4-116: Printed circuit connectors - Detail specifications for high-speed two-piece connection with integrated protection function
TS EN 60512-28-100 Connectors for electronic equipment - Tests and measurements - Part 28-100: IEC 60603-7 and IEC 61076-3 series with connectors up to 1000 MHz signal integrity tests - 28a and 28g tests
TS EN 61169-26 Radio frequency connectors - Part 26: Part standard for RF coaxial connectors of the TNCA series
TS EN 60512-9-4 Connectors for electronic equipment - Tests and measurements - Part 9-4: Strength tests - Test 9d: Endurance of connection holding system and gaskets (maintenance, aging)
TS EN 60352-2 / A1 Solderless connections - Part 2: Solderless fixed connections - General rules, test methods and application guide
TS EN 60512-12-6 For electronic devices - Electromechanical components - Basic test procedures and measuring methods - Part 12: Soldering tests - Part 6: Test 12f: Sealing against paste and cleaning solvents and solder paste in machine soldering
TS EN 50625-1 Collection, logistics and processing requirements for WEEE - Part 1: General Processing Requirements
TS EN 60512-12-7 Fasteners for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability - Solder holding stability method
TS EN 61076-2-109 Connectors for electronic equipment - Product rules - Part 2-109: Circular connectors - Detail standard for M12 x 1 screw-locking connectors, for data transmission frequencies up to 500 MHz
TS EN 61076-2-104 Connectors for electronic equipment - Product rules - Part 2-104: Circular connectors - M8 detail standard for screw-locking or spring-locking circular connectors
TS EN 60352-5 / AC Solderless connections - Part 5: Compression connections - General rules, test methods and application guide
TS EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
TS EN 50625-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements
TS EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
TS EN 60512-29-100 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 12MHz on M500 type connectors
TS EN 61076-4-116 / A1 Connectors for electronic devices - Product specification - Part 4-116: Printed circuit connectors - Detail specifications for high-speed two-piece connection with integrated protection function
TS EN 60603-7-81 Connectors for electronic equipment - Part 7 -81: Detail standard for 2000 bus, armored, free and fixed connectors for data transmissions with frequencies up to MHz
TS EN 61076-3-110 Connectors for electronic devices - Product specifications - Part 3-110: Detail specifications for free and fixed connectors for frequency data transmission up to 3000 MHz
TS EN 60603-7-82 Fasteners for electronic equipment - Part 7 -81: Detail standard for 2000-way, 8 contact, armored, free and fixed connectors for data transmissions with frequencies up to MHz
TS EN 61076-3-120 Connectors for electronic devices - Product specifications - Section 3-120: Rectangular connectors - Switch-disconnected, reconnected power connectors for rated voltage 250 V dc and rated current 30 A
TS 5289 EN 60603-1 Connectors - used in printed circuit boards at frequencies below 3 mhz - Part 1: General specification - Guidelines and general guidelines for the preparation of a quality approved detail specification standard
TS EN 60603-2 Connectors - intended for use with printed circuit boards at frequencies below 3 mhz - Part 2: Detail specification of two-piece connectors for quality assessment of 2,54 mm (0,1 in) base grating with common assembly characteristics
TS EN 60068-2 -43 Environmental resistance test - Part 2-43: Tests - Kd test: Hydrogen sulfide test for contacts and connections
TS EN 60118-12 Hearing aids - Part 12: Dimensions of electrical connector systems
TS EN 60130-17 Connectors for frequencies below 3 mhz - Part 17: Detail specifications for the versatile interlocking devices used in rechargable batteries allowing interlocking
TS EN 60130-9: 2011 3 connectors for sub-frequencies - Part 9: Circular connectors for radio and audio equipment
TS EN 60268-12 Sound system devices - Part 12: Connector applications for broadcasting and similar purposes
TS EN 60512-1-3 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 1: General inspection - Part 3: Test 1c- Electrical coupling length
TS EN 60512-11-1 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 11: Climate tests - Part 1: Test 11a - Climate sequence
TS EN 60512-1-4 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 1: General - Part 4: Test 1d- Contact protection efficiency (contact resistance)
TS EN 60512-11-8 For electronic devices - Electromechanical components - Basic test procedures and measuring methods - Part 11: Air conditioning tests - Part 8: Test 11h- Sand and dust
TS EN 60512-10-4 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 10: Impact (free components), static load (fixed components), endurance and overload tests - Part 4: Test 10b: Electrical overload Loading (binders)
TS EN 60512-14-7 For electronic devices - Electromechanical components - Basic test procedures and measuring methods - Part 14: Tightness tests - Part 7: Test 14g: Water hammer
TS EN 60512-1-1 Connectors for electronic devices-Tests and measurements-Part 1-1: General inspection-Test 1a: Visual inspection
TS EN 60512-1-2 Connectors for electronic devices-Tests and measurements-Part 1-2: General inspection-Test 1b-Dimension and mass inspection
TS EN 60512-2-1 Connectors for electronic devices-Tests and measurements-Section 2-1: Electrical continuity and contact resistance tests-Test 2a-Millivolt level method
TS EN 60512-2-3 Connectors for electronic devices-Tests and measurements-Section 2-3: Electrical continuity and contact resistance tests-Test 2c-Contact resistance change
TS EN 60512-2-6 Connectors for electronic devices - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Enclosure (housing) electrical continuity
TS EN 60512-3-1 Connectors for electronic devices - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
TS EN 60512-4-2 Connectors for electronic devices-Tests and measurements-Section 4-2: Stress-strain tests-Test 4b: Partial discharge
TS EN 60512-4-3 Connectors for electronic devices-Tests and measurements-Section 4-3: Tensile strength tests-Test 4c: Tensile strength of pre-insulated crimp tips
TS EN 60512-5-1 Connectors for electronic devices-Tests and measurements-Section 5-1: Current carrying capacity tests-Test 5a: Temperature rise
TS EN 60512-6-1 Connectors for electronic devices - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
TS EN 60512-11-7 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 11: Climate tests - Part 7: Test 11g flowing mixed gas corrosion test
TS EN 60512-11-7 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 11: Climate tests - Part 7: Test 11g flowing mixed gas corrosion test
TS EN 60512-16-11 Connectors for electronic devices - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solder-wound connections
TS EN 60512-11-4 Connectors for electronic devices - Tests and measurements - Part 11-4: Air conditioning tests; Experiment 11d: Rapid change of temperature
TS EN 60512-11-6 Connectors for electronic devices - Tests and measurements - Part 11-6: Air conditioning tests; Experiment 11f; Corrosion, salty fog
TS EN 60512-11-9 Connectors for electronic devices - Tests and measurements - Part 11-9: Air conditioning tests; Experiment 11: Dry temperature
TS EN 60512-2-2 Connectors for electronic devices - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Special test current method
TS EN 60512-6-5 Electromechanical components for electronic devices-Basic test procedures and measurement methods-Part 6: Dynamic stress tests-Part 5: Test 6e: Random vibration
TS EN 60512-15-1 Connectors for electronic devices - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact holding in case of installation
TS EN 60512-15-3 Connectors for electronic devices - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Contact holding in the housing (torsion)
TS EN 60512-15-5 Connectors for electronic devices - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact holding on insertion, cable bending
TS EN 60512-15-4 Connectors for electronic devices - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact fitting, release and removal force
TS EN 60512-15-7 Connectors for electronic devices - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Strength of protective coated fastenings
TS EN 60512-16-2 Connectors for electronic devices - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted input
TS EN 60512-16-3 Connectors for electronic devices - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-Flexural strength
TS EN 60512-16-4 Connectors for electronic devices - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (compression joints)
TS EN 60512-16-5 Connectors for electronic devices - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge holding force (flexible contacts)
TS EN 60512-16-9 Connectors for electronic devices - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Earthing contact spring holding force
TS EN 60512-16-17 Connectors for electronic devices - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compression strength, fixed male ends
TS EN 60512-7-1 Connectors for electronic devices - Tests and measurements - Part 7-1: Tapping tests (free ties) - Test 7a: Free fall (repeated)
TS EN 60512-9-1 Connectors for electronic equipment - Tests and measurements - Part 9-1: Strength tests - Test 9a: Mechanical process
TS EN 60512-19-3 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 19: Chemical resistance test - Part 3: Test 19c: Fluid resistance
TS EN 60512-9-5 Connectors for electronic equipment - Tests and measurements - Part 9-3: Withstand tests - Test 9e: Current loading, conversion
TS EN 60512-23-7 Connectors for electronic devices - Tests and measurements - Part 23-7: Screening and filter tests - Test 23g: Effective transfer impedance of connectors
TS EN 60512-25-1 Connectors for electronic devices-Tests and measurements-Part 25-1: Test 25a-Line mixing ratio
TS EN 60512-25-3 Connectors for electronic devices-Tests and measurements-Part 25-3: Test 25c-Distortion of rise time
TS EN 60512-25-4 Connectors for electronic devices-Tests and measurements-Part 25-4: Test 25d-Propagation delay
TS EN 60512-25-5 Connectors for electronic devices - Test and measurements - Part 25-5: Test 25e: Return loss
TS EN 60512-25-7 Connectors for electronic devices - Test and measurements - Part 25-7: Test 25g: Impedance, reflection, coefficient and voltage steady-wave ratio
TS EN 60512-23-2: 2010 Electromechanical components of electronic devices - Basic test procedures and measurement methods - Part 23-2: Imaging and filtration tests-Test 23b: Printing characteristics of integral filters
TS EN 60512-5-2 Connectors for electronic devices-Tests and measurements-Section 5-2: Current carrying capacity tests-Test 5b: Current reduction with temperature
TS EN 60512-23-4 Connectors for electronic devices-Tests and measurements-Section 23-4: Screening and filtering tests-Test 23d: Transmission line reflections in time domain
TS EN 60512-20-2 Electromechanical components for electronic devices-Basic test procedures and measuring methods-Part 20-2: Test 20b- Flammability tests-Fire resistance
TS EN 60512-11-10 Connectors for electronic devices - Tests and measurements - Part 11-10: Air conditioning tests; Experiment 11j: Cold
TS EN 60512-11-11 Connectors for electronic devices - Tests and measurements section 11-11: Air conditioning tests; Experiment 11k; Low air pressure
TS EN 60512-11-13 Connectors for electronic devices - Tests and measurements - Part 11-13: Air conditioning tests; Experiment 111; Gas-tight solderless, coiled connections
TS EN 60512-12-1 Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
TS EN 60512-12-2 Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
TS EN 60512-12-3 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, dehumidification
TS EN 60512-12-4 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, method of solder bath
TS EN 60512-12-5 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, method of soldering iron
TS EN 60512-13-1 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical working tests - Test 13a: Coupling and disconnecting forces
TS EN 60512-13-2 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical working tests - Test 13b: Insertion and withdrawal forces
TS EN 60512-13-5 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical working tests - Test 13e: Polarization and switching method
TS EN 60512-14-2 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leak
TS EN 60512-14-4 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14f: Immersion-Waterproof test
TS EN 60512-14-5 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
TS EN 60512-14-6 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Sealing between surfaces
TS EN 60512-25-9 Connectors for electrical equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien diaphone
TS EN 60512-25-6 Connectors for electronic devices - Test and measurements - Part 25-6: Test 25f: Eye pattern and error
TS EN 60512-15-8 Electromechanical components of electronic devices-Basic test procedures and measuring methods-Section 15: General section 15: Mechanical tests applied to contacts and terminals-Part 8: Test 15h: Resistance of contact holding system to the application of the instrument
TS EN 60512-16-13 Connectors for electronic devices - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Unwinding, solder-wound connections
TS EN 60512-16-14 Connectors for electronic devices - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male ends
TS EN 60512-16-6 Connectors for electronic devices - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
TS EN 60512-16-8 Connectors for electronic devices - Tests and measurements - Part 16-8: Mechanical tests on contacts and terminations - Test 16h: Insulation tightness efficiency (compression joints)
TS EN 60512-15-6 Connectors for electronic devices - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling elements
TS EN 60512-16-16 Connectors for electronic devices - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male ends
TS EN 60512-16-7 Connectors for electronic devices - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after compression
TS EN 60512-16-1 Connectors for electronic devices - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Prop damage
TS EN 60512-6-2 Connectors for electronic devices - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Impact
TS EN 60512-6-3 Connectors for electronic devices-Tests and measurements-Part 6-3: Dynamic stress tests-Test 6c: Mechanical impact
tst EN 60512-11-7 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 11: Climate tests - Part 7: Test 11g flowing mixed gas corrosion test
TS EN 60512-26-100: 2008 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for binders in accordance with IEC 60603-7, test and reference adjustments and measurements - 26a to 26g
60512-20-1: Connectors for electronic devices - Tests and measurements - Part 2010-20: Fire hazard tests-Test 1a: Flammability, needle-flame
TS EN 60512-11-14 Connectors for electronic equipment - Tests and measurements - Part 11-14: Air conditioning tests - Test 11p: Single gas flowing corrosion test
TS EN 60512-8-2: 2011 Connectors for electronic devices - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, longitudinal "
TS EN 60512-26-100: 2008 / A1: 2011 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for connectors according to Iec 60603-7, test and reference adjustments and measurements from 26 to 26 Experiments up to
TS EN 60512-17-2: 2011 Connectors for electronic devices - Tests and measurements - Part 17-2: Cable clamp tests - Test 17b: Cable clamp resistance to cable rotation "
TS EN 60512-16-18 Connectors for electronic devices - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Bending of contacts, simulation
TS EN 60603-8 Connectors - used in printed circuit boards at frequencies below 3 mhz - Part 8: Two-piece used in 0,63 mm (0,63 inch) basic grid printed circuit boards with male contacts 2,54 mm x 0,1 mm
TS EN 60603-2 / A1 Connectors - intended for use with printed circuit boards at frequencies below 3 mhz - Part 2: Part of the quality assessment of two-piece connectors for 2,54 mm (0,1 in) basic grating with common mounting characteristics used in printed circuit boards Detail specification
TS EN 60603-14 Connectors for frequencies below 3 MHz for use with printed circuit boards - Part 14: Audio, video and audio - Detail specifications of circular connectors for low-frequency audio and video applications such as visual equipment (ic 60603-14: 1998)
TS EN 60603-7-51 Connectors for electronic devices - Part 7-3: 8-path, shielded free and fixed connectors and detail specification for data transmission at frequencies up to 500 mhz
TS EN 60603-7-1: 2011 Connectors for electronic devices - Part 7-1: 8-Detail specification for shielded, free and fixed connectors
TS EN 60603-7-2: 2010 Connectors for electronic devices - Part 7-2: 8-directional, unshielded free and fixed connectors and detail specification for data transmission at frequencies up to 100 mhz
TS EN 60603-7-4: 2010 Connectors for electronic devices - Part 7-4: Detail specification standard for 250 non-armored free and fixed connectors for data transmissions at frequencies up to 8 mhz
TS EN 60603-7 Connectors for electronic devices - Part 7: Detail specifications for 8-way, unshielded, free and fixed connectors
TS EN 61020-1 Electromechanical switches for use in electrical and electronic equipment part 1: General features
TS EN 61076-1 Connectors for electronic devices - Product specifications - part 1: General specifications
TS EN 61076-3: 2008 Connectors for electronic equipment - Product specifications - Part 3: Rectangular connectors - Part specification
TS EN 61076-2-105 Connectors for electronic devices - Part 2-105: Circular connectors - Detail specifications for m5 connectors with screw locking
TS EN 61076-7-100Connectors for electronic devices - Product specifications - Part 3-100: Cable output devices -
TS EN 61076-7-001 Connectors for electronic devices - Part 7-001: Cable outlet end accessories - Blank detail specification standard
TS EN 61076-2-103 Connectors for electronic devices - Part 2-103: Detail specification standard for most multi-pole connectors (xlr type)
Connectors also used in TS EN 61076-3-100 - High speed data applications at numerical and analog frequencies - Part 3-100: Quality approved rectangular connectors - Detail feature for - 1.27 mm double row shell-shaped and integral ribbon contacts
TS EN 61076-3-101 Dc, quality evaluated connectors used in low analogue and digital high data applications - Part 3: Rectangular connectors - Part 101: 1,27x2,54 detail specifications for insulated connectors with fixed rectangular contacts and trapezoidal sheaths in mm centerline
TS EN 61076-3-103 Connectors for electronic devices - Part 3-103: Rectangular connectors - Detail specification standard for single-row connectors with fixed ribbon cable contacts in 1,25 mm pitch for high-speed serial data (hssdc)
TS EN 61076-3-104 Connectors for electronic devices - Part 3-104: Rectangular connectors - Detail specification standard for free and fixed 600-way shielded connectors for data transmissions at frequencies up to 8 mhz
TS EN 61076-3-106 Connectors for electronic devices - Product specification - Part 3-16: Rectangular connectors - Protective housing detail specifications for use with 60603-Way armored and non-armored connectors for industrial environment compliant with Iec 7-8 series standards
TS EN 61076-3-112 Connectors for electronic devices - Product specifications - Part 3-112: Rectangular connectors - Detail specifications of four-connected rectangular connectors for high-performance serial bus used for consumer audio / video devices
TS EN 61076-3-116 Connectors for electronic equipment - Product rules - Part 3-16: Rectangular connectors - Use with 60603-way armored or shielded connectors for frequencies up to 7-mhz for industrial environments, including the IEC 600-8 series interface detailed specifications of enclosures
TS EN 61076-3-117 Connectors for electronic equipment - Product rules - Part 3-117: Rectangular connectors - Use with 60603-way armored or shielded connectors for frequencies up to 7-mhz for industrial environments, including the IEC 600-8 series interface detail specifications for housings - Iec 61076-3-106-related variants
TS EN 61076-4-001 Evaluated quality connectors for digital high-speed data applications with da and low frequency analogue - Part 4: Part specifications - Printed circuit connectors - Part 001: Blank detail specifications
TS EN 61076-4-102 Evaluated quality connectors for digital high-speed data applications with da and low frequency analogue - Part 4: Part specifications - Printed circuit connectors - Part 102
TS EN 61076-4-104 Connectors used in Dc low frequency analogue and digital high speed data applications - Part 4-104: Printed circuit connectors with evaluated quality - Limited to two-piece modular connector, limited to 0,15 mm multi-grid, 2mm Detail specifications for basic grill
TS EN 61076-4-105 Dc, quality-rated connectors used in low analog and digital high data applications - Part 4: Printed circuit connectors - Part 105: 3 to 8 for use in a wide range of applications involving the audio and communications industry Detail feature for 9mm circular connector
TS EN 61076-4-113 Connectors for electronic devices - Printed circuit connectors - Part 4-113: Detail specification standard for 2,54 in-line 5 section connectors with 2 mm grid for printed circuits and backplanes in data line applications
TS EN 61076-4-114 Connectors for electronic devices - Part 4-114: Printed circuit connectors - Detail specification standard for 1 segmented connector with integrated screening function with 1,5 mm x 2 mm grid
TS EN 61076-4-115 Connectors for electronic devices - Part 4-115: Printed circuit connectors - Backplane connector for infiniband device
TS EN 61169-19: 2011Radio frequency connectors - Part 18: Part feature standard - Type ssmb's radio frequency uniaxial connectors
TS EN 61319-1 Interconnection of satellite receiver devices - part 1: Europe
TS EN 61797-1 Transformers and inductors for telecommunication and electronic equipment - Main dimensions of coil dies - Part 1: Coil dies for sheet cores
TS EN 62047-4: 2010 Semiconductor circuits - Micro electromechanical devices - Part 4: General specification for Mems
TS EN 62047-6 Semiconductor circuits - Microelectromechanical devices - Part 6: Methods for coaxial fatigue testing of thin film materials
TS EN 62197-1 Connectors for electronic devices - Quality evaluation specifications - Part 1: General specifications
TS EN 129000 + A1 General specifications - Coils with fixed rf winding
TS EN 129100 + A1 Part features - Coil surface mounted coils
TS EN 129101 + A1 + A2 Empty detail specifications - Level e specified - Wire-wound surface-mounted coils of specified quality
TS EN 129102 + A1 Empty detail specification - Level p specified - Wire-wound surface-mounted coils of specified quality
TS EN 129200 + A1 Part features - Fixed coils with ceramic or ferrite cores wrapped with copper wire for Hf circuits
TS EN 129201 + A1 Empty detail specification - Wire coils with ceramic or ferrite core at specified e level
TS EN 129202 + A1 Empty detail specification - Ceramic coils with ceramic or ferrite core at specified p level
TS EN 175101-802 Detail features: Two-piece connectors for printed circuits for the large number of 3 mm basic grid contacts on 4 or 2,54 rods
TS EN 175101-809 Detail specification standard - Short version according to defined cecc 75101-801 2,54-section connectors for grating printed circuits of mm 2
TS EN 175201-804 Detail feature: Circular connector with machined double 1.6 mm radius s-round contact
TS EN 175300 Part features: Rectangular connectors for frequencies below 3 mhz
TS EN 175301-803 Detail feature: Rectangular connectors - Flat contacts, 0.8 mm non-removable clamping screw
TS EN 175301-801 Detail specification standard: High-density rectangular connectors with round detachable compression contact tips
TS EN 175500 Part features: Cable outlet accessories for connectors, including quality approval and qualification approval
tst EN 196000 General specification standard: Electromechanical switches
tst EN 196000 / A1 General features: Electromechanical switches
TS EN 196403 Inset detail features: Push type electrical switches. y level evaluation