Transformers, Reactors measurements and tests We carry out all your operations in the following standards regarding the necessary regulations in accordance with the test and test rules determined for
TS EN 61050 Transformers (neon transformers) -Free output voltage exceeding 1000 v -For tube-shaped discharge lamps -General and safety rules
TS EN 60146-1-3 Semiconductor converters - General specifications and line switching inverters part 1-3: Transformers and reactors
TS EN 61203 Synthetic organic esters for electrical purposes - Maintenance instructions for transformer esters in devices
TS EN 60938-1 Determined inductors for the suppression of electromagnetic interference_ section -1: Main rules
TS EN 60938-2 Determined inductors for the suppression of electromagnetic interference - Part 2: Partial rule
TS EN 60938-2-1 Determined inductors for the suppression of electromagnetic interference - Part 2-1: Blank detail specifications - Inductors where safety testing is required - D-level evaluation
TS EN 60938-2-2 Determined inductors for the suppression of electromagnetic interference - Part 2-2: Blank detail specifications - Inductors where safety testing is required
TS EN 61558-2-2 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Related specifications and tests for power transformers and control transformers combined with control transformers
TS EN 61378-2 Converter transformers - Part 2: Transformers for high voltage direct current applications
TS EN 50216-1 Power transformers and reactor interconnects - Part 1: General
TS EN 50216-2 Power transformer and interconnection parts-Section 2: Liquid-immersed transformers and gas and oil-operated relays used in enclosed reactors
TS EN 50216-5 Power transformers and reactor components-Part 5: Liquid level, pressure devices and flow indicators
TS EN 60076-5 Power transformers - part 5: Short-circuit withstand capability
TS EN 50216-6 Auxiliary equipment of power transformer and reactor - Part 6: Detachable radiators for oil immersed transformers
TS EN 60076-4 Power transformers - Part 4: Guide to lightning and switching impact tests - Power transformers and reactors
TS EN 60076-4 Power transformers - part 4: Guidance on lightning impulse and switching impulse testing - Power transformers and reactors
TS EN 50216-5 / A2 Power transformers and reactor components - Part 5: Liquid level, pressure devices and flow indicators
TS EN 60076-5 Power transformers part 5: Ability to withstand short circuit
TS EN 50216-2 / A1 Power transformer and interconnection parts-Section 2: Liquid-immersed transformers and gas and oil-operated relays used in enclosed reactors
TS EN 61558-1 Safety of power transformers, power supplies, reactors and similar products - Part 1: General rules and tests
TS EN 50216-5 / A3 Power transformers and reactor interconnects - Part 5: Liquid level, pressure gauges and flow indicators
TS EN 61558-2-1 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular specifications and tests of power supplies combined with separation transformers and separation transformers for general applications
TS EN 61558-2-1 Safety of power transformers, power supply units and the like - Part 2 - 1: Particular requirements for separation transformers for general use
TS EN 50464-2-3 Three-phase 36 oil-immersed distribution transformers from 50 kVA to 2500 kVA for equipment with the highest voltage not exceeding 50 kV - Part 2-3: Cable boxes on high voltage and / or low voltage transformers with cable - Type 50464 cable boxes for use in distribution transformers meeting the requirements of EN 2-1-2
TS EN 61558-2-2 Power transformers - Safety of power supply units and the like - Part 2-2: Particular requirements for control transformers
TS EN 50216-2 Power transformer and reactor auxiliary equipment - part 2: Gas and oil-actuated relay for liquid immersed transformers and reactors with expansion tank
TS EN 61558-2-7 Safety of power transformers, power supply units and the like part 2-7: Particular requirements for testing of transformers and for testing of toy power supply units
TS EN 61558-2-7 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies in toys
TS EN 50216-5 / A3 Power transformer and reactor auxiliary equipment - part 5: Liquid level, pressure and flow indicators, pressure relief devices and air dryer breathing apparatus
TS EN 50216-10Power transformer and reactor auxiliary equipment - part 10: Oil-to-air heat exchangers
TS EN 50216-11 Power transformer and reactor auxiliary equipment - Part 11: Oil and winding temperature gauges
TS EN 61558-2-16 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - part 2-16: Particular requirements and tests for switching mode power supply units and transformers for switching mode power supply units
TS EN 60076-6 Power transformers - Part 6: Reactors
TS EN 60076-6 Power transformers - Part 6: Reactors
TS EN 50216-10 Power transformer and reactor auxiliary equipment - Part 10: Oil to air heat exchangers
TS EN 50216-11 Power transformer and reactor auxiliary equipment - Part 11: Oil and winding temperature gauges
TS EN 50216-9 Auxiliary equipment for power transformers and reactors - Part 10: Oil to water heat exchangers
TS EN 61558-2-16 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - Part 2-16: Particular requirements and tests for switch-mode power supply and transformers for switch-state power supply units
TS EN 61558-2-4 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - Part 2-4: Particular requirements and tests for power supply units combined with isolating transformers and isolating transformers
TS EN 61558-2-3 Safety of transformers, reactors, power supply units and their combinations - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
TS EN 61558-2-8 Safety of transformers, reactors, power supply units and their combinations - Part 2-8: Particular requirements and tests for transformers and power supply units of conventional and musical cymbals
TS EN 61558-2-4 Safety of power transformers, power supply units and the like part 2-4: Particular requirements for commonly used separation transformers
TS EN 61558-2-13 Safety of power transformers, power supply units and the like - Part 2-13: Particular requirements for general use of auto transformers
TS EN 61558-1 / A1 Safety of power transformers, power supplies, reactors and similar products - Part 1: General rules and tests
TS EN 61558-2-23: Safety of power transformers, power supply units and the like - Part 2010-2: Particular requirements for transformers used on construction sites
TS EN 61558-2-5 Safety of power transformers, power supply units and the like - Part 2- 5: Particular requirements for shaver transformers and shaver supply units
TS EN 61558-2-6 Safety of power transformers, power supply units and the like - 2-6: Particular requirements for safety isolating transformers for general use
TS EN 61558-2-9 Safety of transformers, reactors, power supply units and their combinations - Part 2-9: Particular requirements and tests for transformers and power supply units for tungsten filament class III hand lamps (IEC 61558-2: 9: 2010: XNUMX: XNUMX) )
61558-2-8: Safety of power transformers, power supply units and similar units
TS EN 61558-2-3 Safety of transformers, reactors, power supply units and their combinations - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
TS EN 61558-2-9 Safety of power transformers, power supply units and the like - Part 2-9: Particular requirements for transformers used in tungsten filament class III hand lamps
TS EN 61558-2-20: Safety of power transformers, power supply units and the like - Part 2011-2: Particular requirements for small reactors
TS EN 61558-2-12 Safety of power transformers, power supply units and the like - Part 2-12: Particular requirements for transformers with constant output voltage
TS EN 60076-2 Power transformers - Part 2: Temperature rise for liquid immersed transformers (IEC 60076-2: 2011)
TS EN 61558-2-20 Safety of transformers, reactors, power supply units and their combinations - Part 2-20: Particular requirements and tests for small reactors
TS EN 60076-16 Power transformers - Part 16: Transformers for wind turbines
TS EN 50464-4: 2007 / A1 Three-phase 36 hz oil distribution transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 60076-1 Power transformers - Part 1: General
TS EN 61558-2-15 Safety of transformers, reactors, power supply units and their combinations - Part 2-15: Particular requirements and tests for separation transformers for the power supply of medical facilities
TS EN 61558-2-15 Safety of power transformers, power supply units and the like - Part 2-15: Particular requirements for disconnecting transformers for power supply in medical facilities
TS EN 50238 / AC: 2010 Railway applications - compatibility between railway vehicle and track detection system
tst EN 50121-5 / AC Railway applications - Electromagnetic compatibility - Part 5: Propagation and immunity of fixed power supply installations and devices
tst EN 50121-5 Railway applications - Electromagnetic compatibility - Part 5: Propagation and immunity of fixed power supply installations and devices
TS EN 60076-18 Power transformers Part 18 - Measurement of frequency response
TS EN 61558-2-14 Safety of power transformers, power supplies, reactors and similar products - Part 2-14: Variable transformers and associated power units with specific features and tests
TS EN 50541-2 Transformers, dry, three-phase, 50 hz, 100-3150 kva, for distribution, high voltage does not exceed 36 kv - Part 2: Determination of the loadability of a non-sinusoidal current loaded transformer
Bushings for liquid-filled transformers up to TS EN 50386 / A1 1 kV and from 5 kA to 250 A
TS EN 61558-2-26 Safety of power transformers, power supply units and the like - Part - 2 - 26: Particular requirements and tests for energy saving and other characteristics of transformers and power supply units
TS EN 60076-14 Power transformers - Part 14: Liquid-immersed power transformers using high temperature insulation materials
TS EN 61558-2-16 / A1 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - part 2-16: Particular requirements for switching mode power supply units and transformers for switching mode power supply units and experiments
TS EN ISO 5826 Transformers - For resistance welding machines - General specifications applicable to all transformers
TS EN 61558-2-10 Safety of transformers, reactors, power supply units and their combinations - Part 2-10: Particular requirements and tests for separation transformers with high insulation levels and separation transformers with output voltages exceeding 1000 V.
TS EN 60214-1 Tap-changers - Part 1: Performance requirements and test methods
TS EN 60076-3 Power transformers - Part 3: Insulation levels, dielectric tests and external isolation ranges in air (IEC 60076-3: 2013)
TS EN 60214-1 Tap-changers - Part 1: Performance requirements and test methods (IEC 60214-1: 2014)
TS EN 50238 / AC: 2010 Railway applications - Compatibility between railway vehicle and track detection system
TS EN 50386 / tst A1 Insulators for liquid-filled transformers with rated voltage 1 kV and rated current 250 A to 5 kA
tst EN 60076-14 Power transformers - Part 14: Liquid-immersed power transformers using high temperature insulating materials
TS EN 61558-2-10 Safety of transformers, reactors, power supply units and their combinations - Part 2-10: Particular transformers with high insulation level and specific transformers and output transformers with output voltages exceeding 1000 V (IEC 61558-2) -10: 2014)
Safety of transformers, reactors, power supply units and similar products with supply voltages up to 61558 V - Part 2-16: Particular requirements for transformers and switching mode power supply units used in switching mode power supply units TS EN 1-1100-2 / A16 and tests (IEC 61558-2-16: 2009 / A1: 2013)
TS EN 61558-2-26 Safety of transformers, reactors, power supply units and their combinations - Part 2 - 26: Particular requirements and tests for transformers and power supply units for energy saving and other purposes (IEC 61558-2: 26: 2013: XNUMX: XNUMX: XNUMX )
TS EN 50216-4 Auxiliary equipment for power transformers and reactors - Part 4: Basic auxiliary equipment (earthing terminal, drain and fill valves, thermometer pocket, wheel set)
TS EN 50299-1 Oil immersed cable glands for transformers and reactors with the highest voltage for equipment with a Um rating of 72,5 kV to 550 kV - Part 1: Cable-filled cable termination elements
TS EN 50299-2 Oil immersed cable glands for transformers and reactors of the highest voltage for equipment with a Um value of 72,5 kV to 550 kV - Part 2: Dry-type cable termination elements
TS EN 62021-1 Insulating fluids - Determination of acidity - Part 1: Automatic potentiometric titration
TS EN 50588-1 36 Hz, medium power transformers for equipment with the highest voltage of the equipment not exceeding 50 kV - Part 1: General specifications
TS EN 50629 Energy performance in large power transformers (Um> 36 kV or Sr 40 MVA)
TS EN 60076-19 Power Transformers: Part 19: Rules for the determination of uncertainties in measuring losses related to Power Transformers and reactors (IEC / TS 60076-19: 2013, amended)
TS IEC 60076-8 Power transformers - Operating instructions
tst EN 50588-1 36 Hz, medium power transformers for equipment with the highest voltage of the equipment not exceeding 50 kV - Part 1: General specifications
tst EN 50464-4 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 50464-4 / tst A1 Three-phase 36 hz oil-immersed transformers from 50 kva to 2500 kva for equipment with a maximum voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 50464-2-1 Three-phase 36 Hz oil immersed distribution transformers from 50 kVA to 2500 kVA with the highest voltage not exceeding 50 kV - Part 2-1: Cable boxes on the high voltage and / or low voltage side transformers - General requirements
TS EN 50464-2-2 Three-phase 36 Hz oil immersed distribution transformers of equipment with maximum voltage not exceeding 50 kV to 2500 kVA to 50 kVA - Part 2-2: Cable junction on the high voltage and / or low voltage side transformers - Type 50464 cable boxes intended for use in distribution transformers that meet the requirements of EN 2-1-1
TS EN 60599 Electrical devices in use filled with mineral oil - Guide to the use of the results of the determination of dissolved and free gases in the evaluation of the condition of the device
TS EN 50588-1 / A1 36 Hz, medium power transformers for equipment with the highest voltage of the equipment not exceeding 50 kV - Part 1: General specifications
TS EN 50629 / A1 Energy performance in large power transformers (Um> 36 kV or Sr 40 MVA)
tst EN 50464-2-3 Three-phase 36 Hz oil immersed distribution transformers from 50 kVA to 2500 kVA equipped with the highest voltage not exceeding 50 kV - Section 2-3: Cable boxes on the high voltage and / or low voltage side transformers - Type 50464 cable boxes intended for use in distribution transformers that meet the requirements of EN 2-1-2
TS EN 60076-10 Power transformers - Part 10: Determination of sound levels
TS EN 50588-1 / tstA1 36 Hz, medium power transformers for equipment with the highest voltage not exceeding 50 kV - Part 1: General specifications
tst EN 50464-3 Three-phase 36 hz oil-immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 3: Determination of the rated power rating of a transformer loaded with non-sinusoidal currents
TS EN 50386 Insulators for liquid-filled transformers with rated voltage up to 1 kV and rated current from 250 A to 5 kA
TS EN ISO 22829 Resistance welding - Transformer-Rectifier for welding guns connected to transformers - Transformer-Rectifier operating at 1000hz frequency
TS EN 50195 Practical guidelines for the safe use of electrical equipment filled with fully enclosed askarel
TS EN 50216-3 Power transformers and reactor interconnectors - Part 3: Protection relays used in airtight sealed liquid immersed transformers and gas unprotected reactors
TS EN 50216-7 Auxiliary equipment for power transformer and reactor-Part 7: Electric pumps for transformers
TS EN 50216-9 Power transformer and reactor auxiliary equipment - part 9: Oil to water heat exchangers
TS EN 50216-3 / A1 Power transformers and reactor interconnects - Part 3: Impermeable liquid immersed transformers and protection relays used in gas unprotected reactors
TS EN 50216-1 Power transformer and reactor auxiliary equipment - part 1: General
TS EN 50216-2 / A1 Power transformer and reactor auxiliary equipment - part 2: Gas and oil-actuated relay for liquid immersed transformers and reactors with expansion tank
TS EN 50216-8 Power transformers and reactor interconnects - Part 8: Butterfly valves for submersible circuits
TS EN 50216-3 / A2 Power transformers and reactor interconnects - Part 3: Impermeable liquid immersed transformers and protection relays used in gas unprotected reactors
TS EN 50216-8 / A1 Power transformers and reactor interconnections - Part 8: Butterfly valves for submersible circuits
TS EN 50216-12: 2011 Power transformer and reactor auxiliary equipment - Part 12: Ventilators
TS EN 50216-5 Auxiliary equipment for power transformers and reactors - part 5: Indicators for liquid level, pressure devices and flow
TS EN 50216-5 / A2 Power transformer and reactor auxiliary equipment - part 5: Liquid level, pressure and flow indicators, pressure relief devices and air dryer breathing apparatus
TS EN 50225 Practical rules for the safe use of fully enclosed, oil-filled pcb-contaminated electrical equipment
TS EN 50329 Railway applications- Stationary installations -Cer transformers
TS EN 50329 / A1 Railway applications - Fixed installations -Cer transformers
TS EN 50464-3 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 3: Determination of the rated power rating of a transformer loaded with non-sinusoidal currents
TS EN 50464-4 Three-phase 36 hz oil-immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 50464-2-1 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with a maximum voltage not exceeding 50 kv - Part 2-1: Cable boxes on the high voltage and / or low voltage side transformers - General rules
TS EN 50464-2-2 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with a maximum voltage not exceeding 50 kv - Part 2-2: Cable boxes on the high voltage and / or low voltage side transformers with cable - Type 50464 junction boxes for use in distribution transformers meeting the requirements of the 2-1-1
TS EN 60076-11 Power transformers - Part 11: Dry type transformers
TS EN 60076-13 Power transformers - Part 13: Self-protected liquid-filled transformers
TS EN 60076-2: 2011 Power transformers - Part 2-Temperature increase for liquid immersed transformers
tst EN 60310 Railway applications - Traction transformers and inductors on railway vehicles
TS EN 60852-4External dimensions of transformers and coils used in communication and electronic devices - Part 4: Transformers and coils using YuI-2 sheets
TS EN 60938-1 Stationary inductors for suppressing electromagnetic interference - Part 1: General feature
TS EN 60938-2 Stationary inductors for suppressing electromagnetic interference - part 2: Part feature
TS EN 61007 Inductors used in electronic communication devices - Measurement methods and test methods
TS EN 61021-1 Stratified core packages for transformers and inductors used in communication and electronic devices - Part 1: Dimensions
TS EN 61021-2 Stratified core packages for transformers and inductors used in communications and electronic devices - Part 2: Electrical characteristics for cores using Yee2 plates
TS EN 61248-1 Transformers and inductors used in electronic communication devices - Part 1: General features
TS EN 61248-2 Transformers and inductors used in electronic communication devices - Part 2: Part characteristics of signal transformers according to the qualification approval method
TS EN 61248-3 Transformers and inductors used in electronic communication devices - Part 3: Characteristics of power transformers according to the qualification approval method
TS EN 61248-4 Transformers and inductors used in electronic communication devices - Part 4: Switch mode power supplies, power transformers part specifications according to the qualification approval method
TS EN 61248-5 Transformers and inductors used in electronic communication devices - Part 5: Partial characteristics of square wave transformers according to the qualification approval method
TS EN 61248-6 Transformers and inductors used in electronic communication devices - Part 6: Part specifications of coils according to the qualification approval method
TS EN 61248-7 Transformers and inductors used in electronic communication devices - Part 7: Part specifications of medium frequency transformers of high frequency coils according to the qualification approval method
TS EN 61378-1: 2011 Transformers - Converter part 1: Transformers for industrial application
TS EN 61596 Magnetic cores ep cores and compound sections for use in inductors and transmitters-Dimensions
TS EN 61797-1 Transformers and inductors for telecommunication and electronic equipment - Main dimensions of coil dies - Part 1: Coil dies for sheet cores