All standards regarding Power Supplies are given below. Testing, inspection and inspection of all the standards mentioned below are carried out by us and we provide fast and reliable certification services based on customer satisfaction.
TS EN 60633 High-voltage direct current energy transport terminology
TS 7767 EN 60618 Inductive voltage dividers
TS EN 61204-3 Low-voltage power supplies, also with output - Part 3: Electromagnetic compatibility (emu)
TS EN 61204-3 Low-voltage power supplies, also with output - Part 3: Electromagnetic compatibility
TS EN 61204-6 Low voltage power supplies with da output - Part 6: Requirements for the performance determination of low voltage power supplies
TS EN 61204-6 Low voltage power supplies, also with output - part 6: Performance evaluation requirements for low voltage power supplies
TS EN 60335-2-29 Safety regulations - For household electrical appliances and similar - Part 2-29: Particular requirements for battery charging devices
TS EN 61800-3 Adjustable speed electric power drive systems - Part 3: Emu product standard with special test methods
TS EN 60335-2-29 Safety regulations - Part for household and similar electrical appliances 2-29: Particular requirements for battery charging devices
TS EN 61204 / A1 Low-voltage power supplies, also with output-Performance characteristics and safety rules
TS EN 62040-2 Uninterruptible power systems (kgc) - Part 2: Electromagnetic compatibility (emu) rules
TS EN 61204-7 Low-voltage power supplies, also with output - Part 7: Safety regulations
TS EN 62310-2 Static conversion systems (sts) - Section 2: Electromagnetic compatibility (EMU) characteristics (IEC 62310-2: 2006, modified)
TS EN 62501 Voltage supply converter (vsc) valves - For high voltage direct current (hvdc) power transmission - Electrical test
TS EN 61204-7 / A11 Low voltage power supplies, also with output - Part 7: Safety regulations
TS EN 60335-2-29 / A2 Safety regulations - For household and similar electrical appliances - Part 2-29: Particular requirements for battery charging devices
TS EN 60335-2-29 / A2 Safety regulations - For household and similar electrical appliances - Part 2-29: Particular requirements for battery charging devices
TS EN 62109-1 Safety of transducers for use in photovoltaic power systems - Part 1: General requirements
TS EN 62040-3: 2011 Uninterruptible power systems (KGS) - Section 3: Method for determining performance and test characteristics
TS EN 62109-2 Safety of transducers for use in photovoltaic power systems - Part 2: Particular requirements for transducers
TS EN 50563 External aa-Da and da-Aa power providers - Determination of average performance of no-load power and active modes
TS EN 60146-1-1 Semiconductor converters- General specifications and line-change inverters- Part 1-1: Key features
TS EN 61803: 1999 / A1Determination of power losses in high voltage direct current converter centers
TS EN 61800-3 / A1 Adjustable speed electric power drive systems - Part 3: Emu product standard with special test methods
TS EN 62041 Power transformers, power supplies, reactors and similar products - EMC specifications
TS EN 61148 Terminal marking for valve element blocks and assemblies and for power conversion equipment
TS EN 62477-1 Safety regulations for power electronics inverter systems and equipment - Part 1: General
TS EN 62040-1 / A1 Uninterruptible power systems (KGS) - Part 1: General rules and safety rules for KGS
TS EN 50563 / A1 External Aa-Da and Da-Aa power providers - Determination of average performance of no-load power and active modes
TS EN 62040-4 Uninterruptible power systems (KGS) -Chapter 4: Environmental aspects-Rules and reporting
TS EN 61204-7 Low-voltage power supplies with output - Part 7: Safety requirements (IEC 61204-7: 2006)
TS EN 62040-3 Uninterruptible power systems (UPS) - Part 3: Performance determination method and test rules (IEC 62040-3: 2011)
TS EN 62477-1 / A11 Safety regulations for power electronics inverter systems and equipment - Part 1: General
TS EN 62747 Terminology for voltage source converters (VSC) for high voltage direct current (HVDC) systems
TS EN 62501 / A1 Voltage source converter (VSC) tubes for high voltage direct current (HVDC) power transmission - Electrical tests
TS EN 62751-1 Power losses in voltage-source converters (VSC) for high-voltage direct current (HVDC) systems - Part 1: General rules
TS EN 62751-2 Power losses from voltage source converters (VSC) for high voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
tst EN 50563 External aa-Da and da-Aa power providers - Determination of average performance of no-load power and active modes
TS EN 50563 / tst A1 External Aa-Da and Da-Aa power providers - Determination of average performance of no-load power and active modes
TS EN 62040-1 / tst A1 Uninterruptible power systems (KGS) - Part 1: General rules and safety rules for KGS (IEC 62040-1: 2008 / A1: 2013)
TS EN 60146-1-1 Semiconductor converters - General rules and line-shift converters - Part 1-1: Standard on basic rules (IEC 60146-1-1: 2009)
TS EN 50216-11 Power transformer and reactor auxiliary equipment - Part 11: Oil and winding temperature gauges
TS EN 50216-9 Auxiliary equipment for power transformers and reactors - Part 10: Oil to water heat exchangers
TS EN 61558-2-16 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - Part 2-16: Particular requirements and tests for switch-mode power supply and transformers for switch-state power supply units
TS EN 61558-2-4 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - Part 2-4: Particular requirements and tests for power supply units combined with isolating transformers and isolating transformers
TS EN 61558-2-3 Safety of transformers, reactors, power supply units and their combinations - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
TS EN 61558-2-8 Safety of transformers, reactors, power supply units and their combinations - Part 2-8: Particular requirements and tests for transformers and power supply units of conventional and musical cymbals
TS EN 61558-2-4 Safety of power transformers, power supply units and the like part 2-4: Particular requirements for commonly used separation transformers
TS EN 61558-2-13 Safety of power transformers, power supply units and the like - Part 2-13: Particular requirements for general use of auto transformers
TS EN 61558-1 / A1 Safety of power transformers, power supplies, reactors and similar products - Part 1: General rules and tests
TS EN 61558-2-23: Safety of power transformers, power supply units and the like - Part 2010-2: Particular requirements for transformers used on construction sites
TS EN 61558-2-5 Safety of power transformers, power supply units and the like - Part 2- 5: Particular requirements for shaver transformers and shaver supply units
TS EN 61558-2-6 Safety of power transformers, power supply units and the like - 2-6: Particular requirements for safety isolating transformers for general use
TS EN 61558-2-9 Safety of transformers, reactors, power supply units and their combinations - Part 2-9: Particular requirements and tests for transformers and power supply units for tungsten filament class III hand lamps (IEC 61558-2: 9: 2010: XNUMX: XNUMX) )
61558-2-8: Safety of power transformers, power supply units and similar units
TS EN 61558-2-3 Safety of transformers, reactors, power supply units and their combinations - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
TS EN 61558-2-9 Safety of power transformers, power supply units and the like - Part 2-9: Particular requirements for transformers used in tungsten filament class III hand lamps
TS EN 61558-2-20: Safety of power transformers, power supply units and the like - Part 2011-2: Particular requirements for small reactors
TS EN 61558-2-12 Safety of power transformers, power supply units and the like - Part 2-12: Particular requirements for transformers with constant output voltage
TS EN 60076-2 Power transformers - Part 2: Temperature rise for liquid immersed transformers (IEC 60076-2: 2011)
TS EN 61558-2-20 Safety of transformers, reactors, power supply units and their combinations - Part 2-20: Particular requirements and tests for small reactors
TS EN 60076-16 Power transformers - Part 16: Transformers for wind turbines
TS EN 50464-4: 2007 / A1 Three-phase 36 hz oil distribution transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 60076-1 Power transformers - Part 1: General 18.12.2013 29.180
TS EN 61558-2-15 Safety of transformers, reactors, power supply units and their combinations - Part 2-15: Particular requirements and tests for separation transformers for the power supply of medical facilities
TS EN 61558-2-15 Safety of power transformers, power supply units and the like - Part 2-15: Particular requirements for disconnecting transformers for power supply in medical facilities
TS EN 50238 / AC: 2010 Railway applications - compatibility between railway vehicle and track detection system
tst EN 50121-5 / AC Railway applications - Electromagnetic compatibility - Part 5: Propagation and immunity of fixed power supply installations and devices
tst EN 50121-5 Railway applications - Electromagnetic compatibility - Part 5: Propagation and immunity of fixed power supply installations and devices
TS EN 60076-18 Power transformers Part 18 - Measurement of frequency response
TS EN 61558-2-14 Safety of power transformers, power supplies, reactors and similar products - Part 2-14: Variable transformers and associated power units with specific features and tests
TS EN 50541-2 Transformers, dry, three-phase, 50 hz, 100-3150 kva, for distribution, high voltage does not exceed 36 kv - Part 2: Determination of the loadability of a non-sinusoidal current loaded transformer
Bushings for liquid-filled transformers up to TS EN 50386 / A1 1 kV and from 5 kA to 250 A
TS EN 61558-2-26 Safety of power transformers, power supply units and the like - Part - 2 - 26: Particular requirements and tests for energy saving and other characteristics of transformers and power supply units
TS EN 60076-14 Power transformers - Part 14: Liquid-immersed power transformers using high temperature insulation materials
TS EN 61558-2-16 / A1 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 v - part 2-16: Particular requirements for switching mode power supply units and transformers for switching mode power supply units and experiments
TS EN ISO 5826 Transformers - For resistance welding machines - General specifications applicable to all transformers
TS EN 61558-2-10 Safety of transformers, reactors, power supply units and their combinations - Part 2-10: Particular requirements and tests for separation transformers with high insulation levels and separation transformers with output voltages exceeding 1000 V.
TS EN 60214-1 Tap-changers - Part 1: Performance requirements and test methods
TS EN 60076-3 Power transformers - Part 3: Insulation levels, dielectric tests and external isolation ranges in air (IEC 60076-3: 2013)
TS EN 60214-1 Tap-changers - Part 1: Performance requirements and test methods (IEC 60214-1: 2014)
TS EN 50238 / AC: 2010 Railway applications - Compatibility between railway vehicle and track detection system
TS EN 50386 / tst A1Busket insulators for liquid-filled transformers with rated voltage 1 kV and rated current 250 A to 5 kA
tst EN 60076-14 Power transformers - Part 14: Liquid-immersed power transformers using high temperature insulating materials
TS EN 61558-2-10 Safety of transformers, reactors, power supply units and their combinations - Part 2-10: Particular transformers with high insulation level and specific transformers and output transformers with output voltages exceeding 1000 V (IEC 61558-2) -10: 2014)
TS EN 61558-2-16 / A1 Safety of transformers, reactors, power supply units and similar products with supply voltages up to 1100 V - Part 2-16: Particular requirements for transformers and switching mode power supplies used in switching mode power supplies and experiments (IEC 61558-2-16: 2009 / A1: 2013)
TS EN 61558-2-26 Safety of transformers, reactors, power supply units and their combinations - Part 2 - 26: Particular requirements and tests for transformers and power supply units for energy saving and other purposes (IEC 61558-2: 26: 2013: XNUMX: XNUMX: XNUMX )
TS EN 50216-4 Auxiliary equipment for power transformers and reactors - Part 4: Basic auxiliary equipment (earthing terminal, drain and fill valves, thermometer pocket, wheel set)
TS EN 50299-1 Oil immersed cable glands for transformers and reactors with the highest voltage for equipment with a Um rating of 72,5 kV to 550 kV - Part 1: Cable-filled cable termination elements
TS EN 50299-2 Oil immersed cable glands for transformers and reactors of the highest voltage for equipment with a Um value of 72,5 kV to 550 kV - Part 2: Dry-type cable termination elements
TS EN 62021-1 Insulating fluids - Determination of acidity - Part 1: Automatic potentiometric titration
TS EN 50588-1 36 Hz, medium power transformers for equipment with the highest voltage of the equipment not exceeding 50 kV - Part 1: General specifications
TS EN 50629 Energy performance in large power transformers (Um> 36 kV or Sr 40 MVA)
TS EN 60076-19 Power Transformers: Part 19: Rules for the determination of uncertainties in measuring losses related to Power Transformers and reactors (IEC / TS 60076-19: 2013, amended)
TS IEC 60076-8 Power transformers - Operating instructions
tst EN 50588-1 36 Hz, medium power transformers for equipment with the highest voltage of the equipment not exceeding 50 kV - Part 1: General specifications
tst EN 50464-4 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 50464-4 / tst A1En three-phase 36 hz oil distribution transformers from 50 kva to 2500 kva for equipment with high voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 50464-2-1 Three-phase 36 Hz oil immersed distribution transformers from 50 kVA to 2500 kVA with the highest voltage not exceeding 50 kV - Part 2-1: Cable boxes on the high voltage and / or low voltage side transformers - General requirements04.03.2017
TS EN 50464-2-2 Three-phase 36 Hz oil immersed distribution transformers of equipment with maximum voltage not exceeding 50 kV to 2500 kVA to 50 kVA - Part 2-2: Cable junction on the high voltage and / or low voltage side transformers - Type 50464 cable boxes intended for use in distribution transformers that meet the requirements of EN 2-1-1
TS EN 60599 Electrical devices in use filled with mineral oil - Guide to the use of the results of the determination of dissolved and free gases in the evaluation of the condition of the device
TS EN 50588-1 / A1 36 Hz, medium power transformers for equipment with the highest voltage of the equipment not exceeding 50 kV - Part 1: General specifications
TS EN 50629 / A1 Energy performance in large power transformers (Um> 36 kV or Sr 40 MVA)
tst EN 50464-2-3 Three-phase 36 Hz oil immersed distribution transformers from 50 kVA to 2500 kVA equipped with the highest voltage not exceeding 50 kV - Section 2-3: Cable boxes on the high voltage and / or low voltage side transformers - Type 50464 cable boxes intended for use in distribution transformers that meet the requirements of EN 2-1-2
TS EN 60076-10 Power transformers - Part 10: Determination of sound levels
TS EN 50588-1 / tstA1 36 Hz, medium power transformers for equipment with the highest voltage not exceeding 50 kV - Part 1: General specifications
tst EN 50464-3 Three-phase 36 hz oil-immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 3: Determination of the rated power rating of a transformer loaded with non-sinusoidal currents
TS EN 50386 Insulators for liquid-filled transformers with rated voltage up to 1 kV and rated current from 250 A to 5 kA
TS EN ISO 22829 Resistance welding - Transformer-Rectifier for welding guns connected to transformers - Transformer-Rectifier operating at 1000hz frequency
TS EN 50195 Practical guidelines for the safe use of electrical equipment filled with fully enclosed askarel
TS EN 50216-3 Power transformers and reactor interconnects - Part 3: Hermetically sealed liquid immersed transformers and protection relays used in gas unshielded reactors
TS EN 50216-7 Auxiliary equipment for power transformer and reactor-Part 7: Electric pumps for transformers
TS EN 50216-9 Power transformer and reactor auxiliary equipment - part 9: Oil to water heat exchangers
TS EN 50216-3 / A1 Power transformers and reactor interconnects - Part 3: Impermeable liquid immersed transformers and protection relays used in gas unprotected reactors
TS EN 50216-1 Power transformer and reactor auxiliary equipment - part 1: General
TS EN 50216-2 / A1 Power transformer and reactor auxiliary equipment - part 2: Gas and oil-actuated relay for liquid immersed transformers and reactors with expansion tank
TS EN 50216-8 Power transformers and reactor interconnects - Part 8: Butterfly valves for submersible circuits
TS EN 50216-3 / A2 Power transformers and reactor interconnects - Part 3: Impermeable liquid immersed transformers and protection relays used in gas unprotected reactors
TS EN 50216-8 / A1 Power transformers and reactor interconnections - Part 8: Butterfly valves for submersible circuits
TS EN 50216-12: 2011 Power transformer and reactor auxiliary equipment - Part 12: Ventilators
TS EN 50216-5 Auxiliary equipment for power transformers and reactors - part 5: Indicators for liquid level, pressure devices and flow
TS EN 50216-5 / A2 Power transformer and reactor auxiliary equipment - part 5: Liquid level, pressure and flow indicators, pressure relief devices and air dryer breathing apparatus
TS EN 50225 Practical rules for the safe use of fully enclosed, oil-filled pcb-contaminated electrical equipment
TS EN 50329 Railway applications- Stationary installations -Cer transformers
TS EN 50329 / A1 Railway applications - Fixed installations -Cer transformers
TS EN 50464-3 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 3: Determination of the rated power rating of a transformer loaded with non-sinusoidal currents
TS EN 50464-4 Three-phase 36 hz oil-immersed transformers from 50 kva to 2500 kva for equipment with the highest voltage not exceeding 50 kv - Part 4: Rules and tests for pressure corrugated tanks
TS EN 50464-2-1 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with a maximum voltage not exceeding 50 kv - Part 2-1: Cable boxes on the high voltage and / or low voltage side transformers - General rules
TS EN 50464-2-2 Three-phase 36 hz oil immersed transformers from 50 kva to 2500 kva for equipment with a maximum voltage not exceeding 50 kv - Part 2-2: Cable boxes on the high voltage and / or low voltage side transformers with cable - Type 50464 junction boxes for use in distribution transformers meeting the requirements of the 2-1-1
TS EN 60076-11 Power transformers - Part 11: Dry type transformers
TS EN 60076-13 Power transformers - Part 13: Self-protected liquid-filled transformers
TS EN 60076-2: 2011 Power transformers - Part 2-Temperature increase for liquid immersed transformers
tst EN 60310 Railway applications - Traction transformers and inductors on railway vehicles
TS EN 60852-4 External dimensions of transformers and coils for communication and electronic devices-Part 4: Transformers and coils using YuI-2 sheets
TS EN 60938-1 Stationary inductors for suppressing electromagnetic interference - Part 1: General feature
TS EN 60938-2 Stationary inductors for suppressing electromagnetic interference - part 2: Part feature
TS EN 61007 Inductors used in electronic communication devices - Measurement methods and test methods
TS EN 61021-1 Stratified core packages for transformers and inductors used in communication and electronic devices - Part 1: Dimensions
TS EN 61021-2 Stratified core packages for transformers and inductors used in communications and electronic devices - Part 2: Electrical characteristics for cores using Yee2 plates
TS EN 61248-1 Transformers and inductors used in electronic communication devices - Part 1: General features
TS EN 61248-2E Transformers and inductors used in electronic communication devices - Part 2: Part specifications of signal transformers according to the qualification approval method
TS EN 61248-3 Transformers and inductors used in electronic communication devices - Part 3: Characteristics of power transformers according to the qualification approval method
TS EN 61248-4 Transformers and inductors used in electronic communication devices - Part 4: Switch mode power supplies, power transformers part specifications according to the qualification approval method
TS EN 61248-5 Transformers and inductors used in electronic communication devices - Part 5: Partial characteristics of square wave transformers according to the qualification approval method
TS EN 61248-6 Transformers and inductors used in electronic communication devices - Part 6: Part specifications of coils according to the qualification approval method
TS EN 61248-7 Transformers and inductors used in electronic communication devices - Part 7: Part specifications of medium frequency transformers of high frequency coils according to the qualification approval method
TS EN 61378-1: 2011 Transformers - Converter part 1: Transformers for industrial application
TS EN 61596 Magnetic cores ep cores and compound sections for use in inductors and transmitters-Dimensions
TS EN 61797-1 Transformers and inductors for telecommunication and electronic equipment - Main dimensions of coil dies - Part 1: Coil dies for sheet cores