We carry out the testing, inspection and certification of the following standards by performing your measurements and inspections with the latest technological devices from the control of electrical equipment sets.
TS EN 50186-1 Washing systems for live lines - for power systems with a rated voltage above 1 kv - Part 1: General requirements
TS EN 50281-2-1 Electrical devices for use in flammable dust environments - Part 2-1: Test methods - Determination of the lowest ignition temperature of dust
TS EN 50303 Group I, category m1 equipment intended to remain in the dangerous state created by the atmosphere by grizu and / or explosive gas
TS EN 50394-1 Electrical devices for use in potentially explosive atmospheres - Group I - Intrinsically safe systems - Part 1: Construction and testing
TS EN 13160-4 Leak detection systems - Part 4: Liquid and / or vapor detection systems for use in leachate or intermediate spaces
TS EN 61112 Working under voltage - Electrical insulation cover
TS EN 61111 Working under voltage - Electrical insulation coating
TS EN 60079-20-1 Electrical devices for explosive gas environments - Part 20-1: Material properties for gas and vapor classification - Test methods and data
TS EN 60079-25 Electrical devices used in explosive gas atmospheres section 25: Intrinsically safe systems
TS EN 60079-19 Explosive atmospheres - Part 19: Equipment repair, maintenance and improvement
TS EN 61236 Working under stress - Supports, bar clamps and auxiliary equipment
TS EN 60079-29-4 Electrical devices - Used in explosive atmospheres - Part 29-4: Gas detectors - Performance characteristics of open road detectors for combustible gases
TS EN 60079-35-1 Explosive atmospheres - Part 35-1: Grizu and mine-sensitive lamps - General rules on the risk of construction and explosion tests
60079-35-1: 2011 / AC Explosive atmospheres - Part 35-1: Grizu and mine-sensitive lamps-- General rules on the risk of construction and explosion tests
TS EN 60079-11 Explosive gas atmospheres - Part 11 - "i" type self-protected devices
TS EN 60079-13 Electrical devices for use in explosive gases - Part 13: Construction and use of rooms or buildings protected by pressurization
tst EN 62013-2 Headlamps for grizu sensitive mines - Part 2: Other performance and safety considerations
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
TS EN 60079-0 Explosive atmospheres - Part 0: Hardware - General requirements (IEC 60079-0: 2011, modified)
TS EN 60079-0 Electrical devices - Used in explosive atmospheres - part 0: Equipment - General specifications
TS EN 60079-35-2 Electrical devices - Used in explosive atmospheres - Part 35-2: Headlamps for grizu sensitive mines - Part 2: Other performance and safety considerations
TS EN 60900 Working under voltage - Power tools used for voltages up to 1000 v aa and 1500 v da
TS EN 61230 Operating under stress - portable equipment for earthing or grounding and short-circuit
TS EN 60900 Working under voltage - Power tools used for voltages up to 1000 V aa and 1500 V da
TS EN 60079-10-1 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres (IEC 60079-10-1: 2015 + COR1: 2015)
TS EN 60079-10-2 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dusty environments (IEC 60079-10-2: 2015)
TS EN 61472 Operating live - 800 kV voltage range Minimum approximation distances for 72,5 kV ac systems - calculation method
tst EN 50495: 2010 Safety devices for safe operation of equipment against explosion risks
TS EN 60079-25 / AC Electrical devices used in explosive gas environments section 25: Intrinsically safe systems
TS EN 60079-0 / A11 Electrical devices - Used in explosive atmospheres - Part 0: Equipment - General specifications
TS EN 61496-2 Machine safety - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active optoelectronic protective elements (AOPDs)
TS EN 61496-1 Safety on machinery - Electrically sensitive protection equipment - Part 1: General rules and tests
TS EN 60743 Working under voltage - Terms and definitions for tools, equipment and appliances
TS EN 60743 Working under voltage - Terms and definitions for tools, equipment and appliances
tst EN ISO / IEC 80079-34 Explosive atmospheres - Part 34: Application of quality systems for equipment production
TS EN 60079-17 Explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations
TS EN 60079-14 Electrical devices - Used in explosive atmospheres - part 14: Design, selection and installation of electrical installations
tst EN 60079-1 Electrical devices for use in explosive gas atmospheres - Part 1: flameproof enclosures type 'd'
tst EN 60079-2 Electrical equipment for explosive gas atmospheres - Part 2: "p" type pressure receptacles
tst EN 60079-7 Electrical devices in explosive gas environments - part 7: Increased safety “e”
tst EN 60079-11 Explosive gas environments - Part 11 - "i" type self-protected devices
TS EN 60079-29-3 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on the functional safety of stationary gas detection systems
TS EN 60079-31 Electrical devices - Part used in explosive atmospheres 31: Equipment protected against dust ignition by type “t mah housing
TS EN 60079-1 Explosive gas environments - Section 1: Devices protected by flameproof enclosures 'd' type
TS EN ISO 14798: 2013 Lifts, escalators and escalators - Risk assessment and risk reduction
TS EN 60079-0 / A11 Explosive atmospheres - Part 0: Hardware - General rules
tst EN 60079-14 Electrical devices - Used in explosive atmospheres - part 14: Design, selection and installation of electrical installations
TS EN 60079-17 Explosive atmospheres - Part 17: Inspection and maintenance of electrical installations (IEC 60079-17: 2013)
tst EN 60079-29-3 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on the functional safety of stationary gas detection systems
TS EN 60079-31 Explosive atmospheres - Part 31: Equipment protected against dust ignition by type “t mah housing (IEC 60079-31: 2013)
tst EN 61496-1 Safety on machinery - Electrically sensitive protective equipment - part 1: General rules and tests
tst EN 61496-2 Machine safety - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active optoelectronic protective elements (AOPDs)
tst EN 60743 Working under voltage - Terms and definitions for tools, equipment and appliances
tst EN 60743 Working under voltage - Terms and definitions for tools, equipment and appliances
TS EN 60079-26 Electrical appliances - Used in explosive atmospheres - Part 26: Equipment with device protection level (EPL) Ga
TS EN 60079-2 Explosive gas atmospheres - Part 2: Devices protected by "p" type pressure enclosures
TS EN 61243-3 Operating under voltage - Voltage detectors - Part 3: Two-pole low voltage version
TS EN 61243-3: 2014 / AC Operating under voltage - Voltage detectors - Part 3: Two-pole low voltage version
TS EN 61481-1 Operating under voltage - Phase comparators - Part 1: Capacitive type used for voltages greater than 1 kV aa
TS EN 61481-2 Operating under voltage - Phase comparators - Part 2: Resistive type for voltages from 1 kV to 36 kV aa
TS EN 61482-1-2 Working under voltage - Protective clothing against thermal hazards caused by electric arc - Part 1-2: Test methods - Method 2: Determination of material and clothing arc protection class using compressed and oriented arc (box test)
TS EN 61482-1-2 Working under voltage - Protective clothing against thermal hazards caused by electric arc - Part 1-2: Test methods - Method 2: Determination of material and clothing arc protection class using compressed and oriented arc (box test)
TS EN 50223 Constant electrostatic application equipment for flammable flocked materials - Safety regulations
50281-2-1: 1998 / AC: 1999Electrical equipment - Used in combustible dust environments - Part 2-1: Test methods - Methods for determining the lowest ignition temperatures of dust
TS EN 60079-10-2 Explosive atmospheres - Part 10-2: Classification of hazardous areas-Flammable dust atmospheres
TS EN 61243-3: 2014 / AC-2 Operating under voltage - Voltage detectors - Part 3: Two-pole low voltage version
TS EN 60079-5 Explosive gas atmospheres - Dust filling Devices protected by "q"
TS EN 60079-18 Electrical devices - Used in explosive atmospheres - part 18: Protection of equipment by encapsulation of type “m”
60079-32-2 Explosive atmospheres - Part 32-2: Electrostatic hazards - Tests
TS EN 60079-19: 2011 / A1 Electrical devices - Used in explosive atmospheres - Part 19: Repair, major maintenance and commissioning
TS EN 60079-29-2 Electrical devices - Used in explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
TS EN 60079-2: 2014 / AC Explosive gas atmospheres - Part 2: Devices protected by pressure pans of type "p"
TS EN 50223 Automatic electrostatic application device for flammable materials in flotation - Safety rules
TS EN 60079-28 Electrical devices - Part used in explosive atmospheres 28: Protection of equipment and transmission systems using optical radiation
TS EN 60079-7 Explosive atmospheres - Part 7: Hardware protection with increased safety “e”
TS EN 60079-10-1 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
TS EN 60079-6 Explosive gas atmospheres - Part 6: oil immersion protected devices "o"
TS EN 60079-14 / AC Electrical devices - Used in explosive atmospheres - Part 14: Design, selection and installation of electrical installations
TS EN 61472 / AC Operating live - 800 kV voltage range Minimum approach distances for 72,5 kV ac systems - calculation method
80079-20-2: Explosive atmospheres - Part 2016-20: Material properties - Test methods for combustible powders
80079-36: 2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic methods and specifications
TS EN ISO 80079-37: 2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical structural safety “c”, control of ignition sources “b”, immersion “k” protection type
TS EN 50628 Electrical installation in underground mines
TS EN 13160-1 Leak detection systems - Part 1: General principles
TS EN 13160-2 Leak detection systems - Part 2: Pressure and vacuum systems
TS EN 13160-7 Leak detection systems - Part 7: General rules and test methods for intermediate gaps, leak proof linings and leak proof liners
TS EN 60079-29-1 Electrical devices - Used in explosive atmospheres - Part 29-1: Gas detectors - Performance characteristics of detectors for flammable gases
80079-38 Equipment and components for potentially explosive atmospheres in underground mines
TS EN 60079-30-1 Electrical appliances - Part used in explosive atmospheres 30-1: Electrically resistant underfloor heating - General and test procedure properties
TS EN 60855-1 Foam-filled insulating tubes and insulating solid bars for work under stress - Part 1: Rods and tubes of circular cross-section
TS EN ISO 10807 Pipeline - Flexible, corrugated, metallic hose assemblies - Used to protect electrical cables in explosive environments
tst EN 50021 Electrical devices for use in potentially explosive atmospheres - Protection class “n”
TS EN 50281-2-1 Electrical equipment - Used in combustible dust environments - Part 2-1: Test methods - Methods for determining the lowest ignition temperatures of dust
Electrical equipment - Used in flammable dust environments - Part 50281-2: Test methods - Methods for determining the lowest ignition temperatures of dust
Specific requirements for the construction, testing and marking of electrical appliances in the hardware group II, category 50284g
TS EN 50381 Portable ventilation rooms with or without internal discharge
TS EN 50381 / AC Portable ventilation rooms with or without internal discharge
TS EN 50394-1 Electrical devices for use in potentially explosive atmospheres - Group I - Intrinsically safe systems - Part 1: Construction and testing
TS EN 50495 Safety devices for safe operation of equipment against explosion risks
TS EN 60079-15 Electrical devices - Used in explosive atmospheres - Part 15: Protection of equipment by type “n koruma protection
TS EN 60079-20-1 Electrical devices - Used in explosive atmospheres - Part 20-1: Material characteristics for gas and vapor classification - Test methods and data
TS EN 60079-29-4 Electrical devices - Used in explosive atmospheres - Part 29-4: Gas detectors - Performance characteristics of open road detectors for combustible gases
TS EN 60079-25 Electrical devices - Used in explosive atmospheres - part 25: Intrinsically safe electrical systems
TS EN 60895 Working under voltage - Conductive clothing for use at rated voltage up to 800 kv aa and ± 600 kv d.a
TS EN 61111 Working under voltage - Electrical insulation coating
TS EN 61112 Working under voltage - Electrical insulation covers
TS EN 61481 / A2 Operating under voltage - Portable phase comparators for alternating current voltages from 1 kv to 36 kv
TS EN 61481 / A1 Operating under voltage - Portable phase comparators for alternating current voltages from 1 kv to 36 kv
TS EN ISO / IEC 80079-34: 2011 Explosive atmospheres - Part 34: Implementation of quality systems for equipment production