Lamps and Related Equipment Standards

We perform testing, inspection and certification of the following standards by performing measurements and inspections using new devices from the control of lamps and other equipment sets.

TS 805 EN 60155 Luminous starters for fluorescent lamps

TS 8698 EN 60598-2-1 Lighting fixtures - Part 2: Particular requirements - Part one: General purpose, fixed

TS 8703 EN 60598-2-6 Lighting fixtures - Part 2: Particular requirements Part 6: With recessed transformer for filament lamps

TS 8708 EN 60598-2-19 Lighting fixtures section 2: Particular requirements safety rules for nineteen air conditioning systems

TS EN 61049 Capacitors - Performance rules used in tubular fluorescent and other discharge lamps

TS EN 61050 Transformers (neon transformers) -Free output voltage exceeding 1000 v -For tube-shaped discharge lamps -General and safety rules

TS 8704 EN 60598-2-7 Lighting fixtures-Section 2: Special requirements-Section 7: Used in horticulture, portable

TS 8705 EN 60598-2-9 Lighting fixtures - Part 2: Special requirements - Part nine - Photo and film fixtures (for amateur work)

TS EN 60838-2-1 Lamp holders-for various lamps-Section 2: Special requirements-Section 1: S14 lamp holders

TS EN 60598-2-25 Lighting fixtures-Section 2: Particular rules-Section 25: Used in the clinical areas of hospitals and health care centers

TS 8701 EN 60598-2-4 Lighting fixtures-Section 2: Special requirements-Section 4: General purpose, portable

TS 8706 EN 60598-2-17 Lighting fixtures - Part 2: Particular requirements - Part 17: Stage lighting for television, film and photo studios (indoor and outdoor)

TS EN 60598-2-23 Lighting fixtures - Part 2: Particular requirements Part 23: Very low voltage lighting systems for filament lamps

TS 183 EN 60081 Lamps - Fluorescent double head - Performance characteristics

TS EN 60061-4 Lamp caps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 61347-2-8 Lamp control - Part 2-8: Ballasts for use with fluorescent lamps - Specific features

TS EN 61347-2-10 Lamp control device - Part 2-10: Electronic converters and converters for operating cold start tube discharge lamps at high frequency)

TS EN 61347-2-11 Lamp control scheme - Part 2-11: Various electronic circuits used in luminaires - Specific features

TS EN 60969 Lamps - Self-ballasted - Used in general lighting - Performance characteristics

TS EN 61347-2-10 Lamp control device - Part 2-10: Electronic converters and converters for operating cold start tube discharge lamps at high frequency)

TS 278 EN 60064 Lamps - Tungsten filament - Used for general lighting in homes and similar places - Performance characteristics

TS 10077 EN 60570 Lighting fixtures - Electrically powered rail systems

TS 9919 EN 60432-1 Lamps - Incandescent filament - Safety rules - part 1: Tungsten filament lamps for general lighting in homes and similar places

TS EN 60432-2 Lamps - Incandescent filament - Safety rules - part 2: Tungsten halide lamps for general lighting in homes and similar places

TS EN 61195 Lamps - Double head fluorescent - Safety regulations

TS 805 EN 60155 / A1 Luminous starters for fluorescent lamps

TS EN 61549 Lamps - Various

TS EN 60061-1 Lamp caps and holders - with gauges for interchangeability and safety - Part 1: Lamp caps

TS EN 60061-2 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 Lamp caps and brackets - with gauges for interchangeability and safety - Part 3: Gauges

TS EN 62094-1 Illuminated display units - For stationary electrical installations in the home and similar - Part 1: General specifications

TS 9519 EN 60360 Standard measurement method for temperature rise of the lamp head

TS 8704 EN 60598-2-7 / A13 Lighting fixtures-Section 2: Special requirements-Section 7: Portable modification used in horticulture 1

TS 8704 EN 60598-2-7 / A2 Lighting fixtures section 2: Particular requirements - Part 7: Gardening, portable

TS EN 60061-3 / tst A47 Lamp caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / A20 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / tst A21 Lamp caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / A22 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A23 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A24 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A25 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A26 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A27 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A28 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS 8700 EN 60598-2-3 Lighting fixtures - Part 2-3: Specific features - For road and street lighting

TS EN 60598-2-10 Lighting fixtures - Part 2-10: Specific features - Portable lighting fixtures for children

TS EN 60399 Lampholders - Lampshade with ring holder - Drum teeth

TS EN 60838-1 Lampholders - Miscellaneous - Part 1: General specifications and tests

TS EN 60238 Lampholders - Edison screw

TS EN 60061-3 / A33 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS EN 60061-3 / A34 Lamp caps and brackets - Part with gauges for interchangeability and safety check 3: Gages

TS 9919 EN 60432-1 / A1 Lamps - Incandescent filament - Safety rules - Part 1: Tungsten filament lamps for general lighting in homes and similar places

TS EN 60598-2-25 / A1Lighting luminaires - Part 2: Particular rules-Section 25: Used in the clinical areas of hospitals and health care centers

TS EN 60838-2-1 / A2 Lampholders - for various lamps - Part 2: Particular requirements - Section 1: S14 lampholders

TS EN 61549 / A1 Lamps - Various

TS EN 60838-2-1 / A2 Lampholders-for various lamps-Section 2: Particular requirements-Section 1: S14 lampholders

TS EN 61549 / A1 Lamps - Various

TS EN 60238 Lampholders - Edison screw

TS EN 61347-2-12 Lamp control device - Part 2-12: Related specifications of electronic or ballast-fed electronic ballasts - For discharge lamps (excluding fluorescent lamps)

TS EN 60901 / A3 Lamps - Single head fluorescent - Performance characteristics

TS EN 61047 Converters - also for filament lamps or aa-fed electronic reducer - Performance guidelines

TS EN 60061-2 / A33 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60432-2 / A1 Lamps - Incandescent filament - Safety rules - Part 2: Tungsten halide lamps for general lighting in homes and similar places

TS EN 60598-2-6 / A1 Lighting fixtures - Part 2: Particular requirements Part 6: With recessed transformer for filament lamps

TS EN 60598-2-19 / A2 Lighting fixtures section 2: Particular requirements safety rules for nineteen air conditioning systems

61347-2-8 / A1 Lamp control scheme - Part 2-8: Ballasts for use with fluorescent lamps - Specific features

TS EN 61347-2-1 / A1 Lamp control scheme - Part 2-1: Starting devices (other than luminous starters) - Specific features

TS EN 60598-2-13 Lighting fixtures - Part 2-13: Related specifications - Buried lighting fixtures

TS EN 60061-2 / A33 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A35 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60432-2 / A1 Lamps - Incandescent filament - Safety rules - part 2: Tungsten halide lamps for general lighting in homes and similar places

TS EN 61347-2-1 / A1 Lamp control scheme - Part 2-1: Starting devices (other than luminous starters) - Specific features

61347-2-8 / A1 Lamp control scheme - Part 2-8: Ballasts for use with fluorescent lamps - Specific features

TS EN 60838-2-2 Lampholders - Miscellaneous - Part- 2-2: Related specifications - Connectors for light emitting diode modules

TS EN 62384 Electronic control for direct current (da) or alternating current (aa) supply for light emitting diode (LED) modules - Performance characteristics

TS EN 60034-26 Rotating electric machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

TS EN 60061-2 / A34 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN ISO 11111-4 Textile machinery - Safety rules - Part 4: Yarn processing, yarn and rope manufacturing machines

TS EN 60061-2 / A34 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A36 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60155 / A2 Luminous starters for fluorescent lamps

TS EN 60061-1 / A38 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-1 / A39 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A35 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-2 / A36 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A37 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-3 / A38 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60921 / A1 Ballasts for tubular fluorescent lamps -Performance characteristics

TS EN 60061-1 / A38 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-1 / A39 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A35 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-2 / A36 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS 805 EN 60155 / A2 Luminous starters for fluorescent lamps

TS EN 60838-2-2 Various lamp holders - Part 2-2: Related specifications - Connectors for light emitting diode (led) modules

TS EN 61048 Auxiliary equipment for lamps - Capacitors - Used in tubular fluorescent and other discharge lamps - General and safety features

TS 278 EN 60064 / A3 Lamps - Tungsten filament - Used for general lighting in homes and similar places - Performance characteristics

TS 278 EN 60064 / A4 Lamps - Tungsten filament - Used for general lighting in homes and similar places - Performance characteristics

TS EN 60061-4 / A11 Lamp caps and brackets -with gauges for checking interchangeability and safety-Section 4: General information and guide

TS EN 60064 / A11 Lamps - Tungsten filament - Used for general lighting purposes in home and other places - Performance characteristics

TS EN 60064 / A4 Lamps - Tungsten filament - Used for general lighting purposes in home and other places - Performance characteristics

TS EN 60927 Auxiliary equipment for lamps - Starting devices (other than luminous starters) - Performance requirements

TS EN 60730-2-3 Automatic control devices - Electrical - For domestic use and similar - Part 2-3: Particular requirements for thermal protectors of tubular fluorescent lamp ballasts

TS EN 60927 Auxiliary equipment for lamps - Starting devices (other than luminous starters) - Performance requirements

TS EN 60598-2-13 Lighting fixtures - Part 2-13: Specific features - floor-mounted luminaires

TS EN 61048 Auxiliary equipment for lamps - Capacitors for use in tubular fluorescent and other discharge lamps - General and safety regulations

TS EN 61347-2-12 Lamp control device - Part 2-12: Electronic ballasts for use with or without discharge lamps (with fluorescent lamps) - Specific features

TS EN 60061-4 / A5 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-4 / A6 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-4 / A7 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-4 / A8 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-4 / A9 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-4 / A10 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-4 / A11 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS 9918 EN 60901 / A4 Lamps - Single head fluorescent - Performance characteristics

TS 9569 EN 60357 / A1 Lamps - Tungsten halide (other than vehicle lamps) - Performance characteristics

TS EN 60061-4 / A1 Lamp caps and brackets -with gauges for checking interchangeability and safety-Section 4: General information and guide

TS EN 60061-4 / A2 Lamp caps and brackets -with gauges for checking interchangeability and safety-Section 4: General information and guide

TS EN 60357 / A1 Lamps - Tungsten halide (other than vehicle lamps) - Performance characteristics

TS EN 60901 / A4 Lamps - Single head fluorescent - Performance characteristics

TS EN 60838-1 / A1 Lampholders - Miscellaneous - General specifications and tests

TS EN 61184 Lamp holder - bayonet

TS EN 60238 / A1 Lampholders - with Edison screw

TS EN 60399 / A1 Lampholders - Lampshade with ring holder - Drum teeth

TS EN 60400 Lampholders - for tubular fluorescent lamps and starters

TS EN 60061-2 / A37Lamp caps and brackets - with gauges for checking interchangeability and safety - Part 2: Lamp brackets

TS EN 60061-2 / A39 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A39 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-3 / A40 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 3: Lamp brackets

TS EN 60061-4 / A12 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 60061-2 / A37 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 61184 Lamp holder-bayonet

TS 278 EN 60064 / A5 Lamps - Tungsten filament - Used for general lighting in homes and similar places - Performance characteristics

TS EN 62384 / A1 Electronic control with direct current (da) or alternating current (aa) supply for light emitting diode (led) modules - Performance characteristics

TS EN 62031 LED modules for general lighting - Safety features

TS EN 61995-2 Devices for the connection of lighting fixtures -Used in household and similar areas -Chapter 1: Standard sheets for Dcl

TS EN 61347-2-10 / A1 Lamp control - Part 2-10: Electronic converters and converters for operating cold start tube discharge lamps in neon tubes at high frequency - Specific features

TS EN 60598-2-14 Lighting fixtures - Part 2-11: Specific features - Lighting for cold-start tubular discharge lamps (neon tubes) and the like

TS EN 60061-3 / A39 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-2 / A38 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-2 / A39 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A40 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60598-2-14 Lighting fixtures - Part 2 - 14: Specific features - Lighting fixtures for cold cathode tube discharge lamps (neon tubes) and similar equipment

TS EN 62386-206 Digital addressable lighting interface - Part 206: Specific features for the control scheme - Conversion from digital signal to voltage (type5 device)

TS EN 62386-207 Digital addressable lighting interface - Part 207: Specific features for the control scheme - Led modules (type6 device)

TS EN 61549 / A2 Lamps - Miscellaneous

TS EN 61549 / A2 Lamps - Various

TS EN 61231 Lamps - International coding system (ILCOS)

TS EN 62471 Photobiological safety of lamps and lamp systems

TS EN 62031 Led modules - For general lighting - Safety features

TS EN 61231 Lamps - International coding system (ilcos)

TS EN 60061-1 / A43 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A40 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A41 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-1 / A44 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-3 / A42 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-2 / A41 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A41 Lamp caps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages (IEC 60061-3: 1969 / A41: 2010)

TS EN 60061-3 / A42 Lamp caps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages (IEC 60061-3: 1969 / A42: 2010)

TS EN 60061-2 / A40 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 61347-2-12 / A1 Lamp control scheme - Part 2-12: Electronic ballasts with or without mains supply for use with discharge lamps (except fluorescent lamps) - Specific features

TS EN 60061-4 / A3 Lamp caps and brackets -with gauges for checking interchangeability and safety-Section 4: General information and guide

TS EN 61347-2-12 / A1Lamp control pattern - Part 2-12: Electronic ballasts with or without mains supply for use with discharge lamps (except fluorescent lamps) - Specific features

TS EN 61347-1 / tstA1 Lamp control - Part 1: General and safety features

TS EN 60598-2-10: 2003 / AC: 2005 Lighting fixtures - Part 2-10: Specific features - Portable lighting fixtures for children

60598-2-13: 2011 / AC Lighting fixtures - Part 2-13: Specific features - Floor-mounted luminaires

TS EN 60598-2-19: 1989 / AC Lighting fixtures section 2: Particular requirements safety rules for nineteen air conditioning systems

TS EN 61347-2-12 / ACLamp control device - Part 2-12: Electronic ballasts for use with or without discharge lamps (with fluorescent lamps) - Specific features

61347-2-11: 2001 / AC: 2010 Lamp control scheme - Part 2-11: Various electronic circuits used in luminaires - Specific features

61347-2-11: 2001 / AC: 2002Lamp control scheme - Part 2-11: Various electronic circuits used in luminaires - Specific features

61347-2-10: 2001 / AC: 2010 Lamp control scheme - Part 2-10: Electronic inverters and converters for the operation of high-frequency discharge lamps (neon tubes) with cold starting - Particular features

61347-2-9: 2001 / AC: 2003 Lamp control scheme - Part 2-9: Ballasts used with discharge lamps (except fluorescent lamps) - Specific features

61347-2-8 / AC Lamp control - Part 2-8: Ballasts for use with fluorescent lamps - Specific features

61347-2-3: 2001 / AC: 2003 Lamp control scheme - Part 2-3: Low-power electronic ballasts for fluorescent lamps - Specific features

TS EN 61347-1: 2001 / AC: 2003 Lamp control - Part 1: General and safety features

TS EN 60598-2-23 / AC Lighting fixtures - Part 2: Particular requirements Part 23: Very low voltage lighting systems for filament lamps (modified in German version)

TS EN 60598-2-3: 2003 / AC: 2005 Lighting fixtures - Part 2-3: Specific features - For road and street lighting

TS EN 60238 / A2 Lampholders - with Edison screw

TS EN 60357 / A3 Lamps - Tungsten halide (excluding vehicle lamps) - Performance characteristics

TS EN 60838-1: 2004 / A2 Lampholders - Miscellaneous - Part 1: General specifications and tests

TS EN 61199 Single head fluorescent lamps - Safety features

TS EN 62532 Fluorescent induction lamps - Safety features

TS EN 60400 / A1 Lampholders - for tubular fluorescent lamps and starters

TS EN 61184 / A1 Lamp holder - bayonet

TS EN 62532 Fluorescent induction lamps-Safety features

TS EN 60598-2-3 / A1 Lighting fixtures - Part 2-3: Specific features - For road and street lighting

TS EN 60598-2-7: 1989 / A2: 1996 / AC: 1999 Lighting fixtures-Section 2: Special requirements-Section 7: Gardening, portable

TS EN 60929 with AC and / or DC supply - Electronic control system - For tubular fluorescent lamps - Performance characteristics

TS EN 61341 Method for measuring the central beam intensity and beam angle (s) of reflective lamps

TS EN 61347-2-3: 2011 Lamp control - Part 2-3: Aa and / or powered electronic control for fluorescent lamps - Specific features

TS EN 61534-1 Power line systems - Part 1: General features

TS EN 62386-209: 2011 Digital addressable lighting interfaces - Part 209: Particular requirements for control gear Color control (device type 8)

TS EN 60061-4 / A13 Lamp caps and brackets -with gauges for checking interchangeability and safety-Section 4: General information and guide

TS EN 61199 Lamps - Single head fluorescent - Safety regulations

TS EN 62554 Sample preparation for mercury limit measurement in fluorescence lamps

TS EN 61347-2-3 / AC Lamp control - Part 2-3: Electronic control with aa and / or power supply for fluorescent lamps - Specific features

TS EN 60929 / AC Aa and / or power supply - Electronic control - For tubular fluorescent lamps - Performance characteristics

TS EN 62504 General lighting - Light emitting diode (LED) products and related equipment - Terms and recipes

TS EN 60061-2: 1993 / A44 Lamp caps and brackets - with gauges for checking interchangeability and safety - Part 2: Lamp brackets

TS EN 60061-3 / A45 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60598-2-2 Lighting fixtures - Part 2: Special rules section 2: Recessed luminaires

60598-2-13: 2006 / A1 Lighting fixtures - Part 2-13: Specific features - Floor-mounted luminaires

TS EN 61347-2-2 Lamp controller - Part 2-2: Electronic down-converters with or without power supply for filament lamps - Specific features

TS EN 61347-2-7 Lamp control device - Part 2-7: Related specifications for also powered electronic ballasts for emergency lighting

TS EN 60061-1 / A47 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60598-2-18 / A1Lighting luminaires - Part 2: Particular requirements - Part 18: Used in swimming pools and similar places

TS EN 13032-1: 2004 + A1 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format

TS EN 60432-1: 2000 / A2 Lamps - Incandescent filament - Safety rules - Part 1: Tungsten filament lamps used in general lighting in homes and similar places

TS EN 60662 Lamps - High pressure sodium vapor

TS EN 60838-2-2: 2006 / A1 Lampholders - Miscellaneous - Part- 2-2: Related specifications - Connectors for light emitting diode modules

TS EN 60901: 1996 / A5 Lamps - Single head fluorescent - Performance characteristics

TS EN 62034 Automatic test systems for emergency escape lighting from the battery

TS EN 62639 Fluorescent induction lamps-Performance characteristics

TS EN 60061-4: 1992 / A14Light caps and brackets - with gauges for checking interchangeability and safety - Part 4: General information and guide

TS EN 62442-1 / AC Energy performance of the lamp control device - Part 1: Control device for flood lamps - Measurement method for the determination of total input power of control device circuits and the effectiveness of the control device

TS EN 62442-1 Energy performance of the lamp control device - Part 1: Control device for fluorescent lamps - Measurement method for the determination of total input power of control device circuits and the effectiveness of the control device

TS EN 60061-2 / A43 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A43 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 61547 Devices for general illumination purposes - Emu immunity rules

TS EN 60929 Electronic controller - with aa and / or power supply - for tubular fluorescent lamps - Performance requirements

TS EN 60929 / AC Aa and / or power supply - Electronic control - For tubular fluorescent lamps - Performance characteristics

TS EN 60598-2-22 / tst AC: 2007 Lighting fixtures-Section 2-22: Highlights-For emergency lighting

TS EN 61347-2-3 Lamp control device - Part 2-3: Electronic control device for fluorescent lamps with aa and / or power supply - Specific rules

TS EN 61347-2-3 / AC Lamp control - Part 2-3: Electronic control with aa and / or power supply for fluorescent lamps - Specific features

61347-2-12 / AC Lamp control - Part 2-12: Electronic ballasts with or without power supply for use with discharge lamps (except fluorescent lamps) - Specific features

61347-2-12 / tst A1 Lamp control scheme - Part 2-12: Electronic ballasts for use with or without discharge lamps (except fluorescent lamps) - Specific features

TS EN 60598-2-2 Lighting Fixtures - Part 2-2: Special requirements - Recessed luminaires

TS EN 60598-2-3 / AC Lighting fixtures - Part 2-3: Specific features - For road and street lighting

TS EN 60598-2-3 / A1 Lighting fixtures - Part 2-3: Specific features - For road and street lighting

TS EN 60061-2 / A42 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-1 / A48 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A45 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A46 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60432-2 / A2 Lamps - Incandescent filament - Safety rules - part 2: Tungsten halide lamps for general lighting in homes and similar places

TS EN 62560 50 V-voltage self-supply LED lamps for general lighting services - Safety regulations

TS EN 60432-3 Lamps - Incandescent filament - Safety rules - Part 3: Tungsten halide lamps (other than vehicle lamps)

TS EN 61347-2-9 Lamp control scheme - Part 2-9: Ballasts for discharge lamps (excluding fluorescent lamps) - Specific features

TS EN 61195 / A1 Lamps - Double head fluorescent - Safety regulations

TS EN 61199 / A1 Lamps - Single head fluorescent - Safety regulations

TS EN 62031 / A1 Led modules - For general lighting - Safety-related features

TS EN 62471 Photobiological safety of lamps and lamp systems

TS EN 16268 Performance of reflective surfaces used in luminaires

TS EN 60730-2-3 Automatic control devices - Electrical-Household and similar sections 2-3: Particular requirements for thermal protectors of tube-shaped fluorescent lamp ballasts

TS EN 60061-3 / A47 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60598-2-12 Lighting fixtures - Part 2-12: Specific features - Night lights used by the mains plug

TS EN 61547 Equipment for general lighting purposes - Emu immunity rules

TS EN 60598-2-11 Lighting fixtures - Part 2-11: Specific features - Aquarium lighting fixtures

TS EN 60598-2-24 Lighting fixtures - Part 2: Special requirements - Part 24: Surface temperature limited luminaires

TS EN 61231 / A1 Lamps - International coding system (ILCOS)

TS EN 62612 Self-balancing LED lamps for general illumination with supply voltage above 50 V - Performance requirements

TS EN 60081 / A5 Lamps - Double head fluorescent - Performance characteristics

TS EN 60927 / A1 Auxiliary equipment for lamps - Starting devices (other than luminous starters) - Performance requirements

TS EN 61347-2-7 Lamp control device - Part 2-7: Particular requirements for the electronic control device supplied by the (independent) battery for emergency lighting

TS EN 62560 Lamps - Self-balancing LED lamps - Used in general lighting with voltage greater than 50 V. - Safety features

TS EN 61347-2-1 / A2 Lamp control scheme - Part 2-1: Starting devices (other than luminous starters) - Specific features

TS EN 62707-1 LED Enclosure - Part 1: General specifications and white color.

TS EN 60061-1 / A50 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A47 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A48 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-1 / A27 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 61534-21 Powerline systems - Part 21: Related specifications of powerline systems intended for wall and ceiling installation

TS EN 62442-2 Energy performance of the lamp control device - Part 2: High intensity discharge lamps (excluding fluorescent lamps) - Measurement method for determining the efficiency of the control device

TS EN 62442-3 Energy performance of the lamp control device - Part 3: Control pattern for halide lamps and LED modules - Measuring method for determining the efficiency of the control pattern

TS EN 60400 / A2 Lampholders - for tubular fluorescent lamps and starters

TS EN 62504 General lighting - Light emitting diode (LED) products and related equipment - Terms and recipes

TS EN 60598-2-22 Lighting fixtures - Part 2-22: Highlights - For emergency lighting

TS EN 61347-2-13 Lamp control scheme - Part 2-13: Particular requirements for electronic control devices for LED modules

TS EN 60061-1 / A27 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-1 / A50 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A47 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60598-2-8 Lighting fixtures - Part 2-8: Special requirements - Hand lamps

TS EN 60598-2-11 Lighting fixtures - Part 2-11: Specific features - Aquarium lighting fixtures

TS EN 60598-2-22 Lighting fixtures - Part 2-22: Highlights - For emergency lighting

TS EN 60598-2-24 Lighting fixtures - Part 2-24: Special requirements - Lighting fixtures with limited surface temperatures

TS EN 60061-3 / A48 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60927 / A1 Auxiliary equipment for lamps - Starting devices (other than luminous starters) - Performance requirements

TS EN 60598-2-18 / A1Lighting luminaires - Part 2: Particular requirements - Part 18: Used in swimming pools and similar places

TS EN 61347-2-1 / cor.2010 Lamp control - Part 2-1: Starting devices (other than luminous starters) - Specific features

TS EN 61347-2-1 / cor.2003 Lamp control - Part 2-1: Starting devices (other than luminous starters) - Specific features

TS EN 61347-2-1 / A2 Lamp control - Part 2-1: Starting devices (other than glittering starters) - Specific features

TS EN 60238 / A2 Lampholders - with Edison screw (IEC 60238: 2004 / A2: 2011)

TS EN 60598-1 Lighting fixtures - Part 1: General rules and tests (IEC 60598-1: 2014, modified)

TS EN 60598-1 Luminaires - Part 1: General rules and tests (IEC 60598-1: 2014, modified)

TS EN 61231 / tst A1 Lamps - International coding system (ILCOS)

TS EN 60400 / A1 Lampholders - for tubular fluorescent lamps and starters (IEC 60400: 2008 / A1: 2011)

TS EN 60400 / A2 Lampholders - for tubular fluorescent lamps and starters

TS EN 62707-1 LED Slices - Part 1: General rules and white color matrix

tst EN 62442-2 Energy performance of the lamp control device - Part 2: High intensity discharge lamps (excluding fluorescent lamps) - Measurement method for determining the efficiency of the control device

TS EN 60630 / A7 Lamps - Incandescent filament - The largest external dimensions of the lamp

TS EN 60809 Lamps - Road vehicles - Dimension, electrical and lighting properties

TS EN 60810 Lights - For road vehicles - Performance characteristics

TS EN 60598-2-22 / AC Lighting fixtures - Part 2-22: Highlights - For emergency lighting

TS EN 61347-1 Lamp control scheme - Part 1: General and safety features

TS EN 60598-2-5 Lighting fixtures - Part 2: Special requirements - Part 5: Projectors

TS EN 60598-1 / AC Lighting fixtures - Part 1: General rules and tests (IEC 60598-1: 2014, modified)

TS EN 62031 / A2 LED modules for general lighting - Safety features

TS EN 60598-2-22 / ACA lighting fixtures - Part 2-22: Highlights - For emergency lighting

tst EN 61347-2-13 Lamp control scheme - Part 2-13: Particular requirements for electronic control devices with or without power supply for LED modules

tst EN 61347-2-9 Lamp control - Part 2-9: Ballasts for discharge lamps (except fluorescent lamps) - Specific features

tst EN 61347-1 Lamp control system - Part 1: General and safety features

TS EN 61199 / A1 Lamps - Single head fluorescent - Safety regulations

TS EN 62442-1 / tst AC Energy performance of the lamp control device - Part 1: Control device for fluorescent lamps - Measurement method for the determination of the total input power of the control device circuits and the effectiveness of the control device

TS EN 60598-2-18 / ACLighting luminaires - Part 2: Particular requirements - Part 18: Used in swimming pools and similar

TS EN 60081 / A5 Lamps - Double head fluorescent - Performance characteristics

TS EN 60968 Lamps - Self-ballast - Used in general lighting - Safety features

TS EN 61199 / A2 Lamps - Single head fluorescent - Safety regulations

TS EN 60598-2-20 Lighting fixtures - Part 2-20: Related specifications - Lighting chains

TS EN 62612 Self-balancing LED lamps for general illumination with supply voltage above 50 V - Performance requirements

TS EN 62442-3 Energy performance of the lamp control device - Part 3: Control pattern for halide lamps and LED modules - Measuring method for determining the efficiency of the control pattern

TS EN 60598-1 / AC Lighting fixtures - Part 1: General rules and tests (IEC 60598-1: 2014, modified)

TS EN 60598-2-18 / tst AC Lighting fixtures - Part 2: Particular requirements - Part 18: Used in swimming pools and similar places

TS EN 62031 / A2 LED modules - For general lighting - Safety-related features

TS EN 60598-2-5 Lighting fixtures - Part 2: Special requirements - Part 5: Projectors

TS IEC 62532 + A1 Fluorescent induction lamps - Safety features

TS EN 60061-1 / A53 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-1 / A52 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-1 / A51 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-2 / A48 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-2 / A49 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-2 / A50 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 2: Lamp brackets

TS EN 60061-3 / A51 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-3 / A49 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-3 / A50 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 61195 / A2 Lamps - Double head fluorescent - Safety regulations

TS EN 61549 / A3 Lamps - Various

TS EN 62035 Lamps - Discharged (other than fluorescent lamps) - Safety regulations

TS EN 62471-5 Photobiological safety of lamps and lamp systems - Part 5: Image reflector

TS EN 62870 Lighting and electrical installations for squares - Safety secondary circuits series - General safety requirements

TS EN 62838 LED lamps for general lighting services with supply voltages not exceeding 50 V ac rms or 120 V dc free ripple - Safety features

TS EN 60061-3 / A49 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-3 / A50 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-3 / A51 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

tst EN 62442-1 Energy performance of the lamp control device - Part 1: Control device for flood lamps - Measurement method for the determination of the total input power of the control circuits and the effectiveness of the control device

TS EN 62560 / A150 V-voltage self-supply LED lamps for general lighting services - Safety regulations

TS EN 62560 / AC 50 V-voltage self-supply LED lamps for general lighting services - Safety regulations

TS EN 62560 / A1 / AC 50 V-voltage self-supply LED lamps for general lighting services - Safety regulations

TS EN 61048 / A1 Auxiliary equipment for lamps - Capacitors - Used in tubular fluorescent and other discharge lamps - General and safety features

TS EN 60238 / AC Lampholders - Edison screw

TS EN 60598-2-22 / ACA lighting fixtures - Part 2-22: Highlights - For emergency lighting

TS EN 62493 Inspection of illumination equipment for people exposed to electromagnetic fields

TS EN 62722-1 Armature performance - Part 1: General requirements

TS EN 60929 / A1 with AC and / or DC supply - Electronic controller - for tubular fluorescent lamps - Performance characteristics

TS EN 61822 / D1 Electrical installations - for airport lighting and indicator lights - Constant current regulators

TS EN 13032-4 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires

TS EN 60357 / A11 Lamps - Tungsten halide (other than vehicle lamps) - Performance characteristics

TS EN 61167 Metal halide lamps - Performance characteristics

TS EN 60061-1 / A54 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 60061-3 / A52 Headlamps and brackets - with gauges for checking interchangeability and safety - Part 3: Gages

TS EN 60061-2 / A51 Lamp caps and sockets - with gauges for interchangeability and safety - Part 2: Lamp sockets

TS EN 60598-2-13 / A2Lighting luminaires - Part 2-13: Specific features - Floor-mounted luminaires

TS EN 62612 / AC Self-ballast LED lamps for general lighting purposes with supply voltage above 50 V - Performance requirements

TS EN 60598-1 / AC-2Lighting luminaires - Part 1: General rules and tests

TS EN 60598-2-20 / ACAlighting fixtures - Part 2-20: Related specifications - Lighting chains

TS EN 60598-2-21 Fixture - Part 2-21: Special Rules - Rope lights

TS EN 60598-2-21 / ACArmature - Part 2-21: Special Rules - Rope lights

TS EN 60061-1 / A55 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS EN 61995-2 / A1 Devices for the connection of lighting fixtures -Used in household and similar areas -Chapter 1: Standard sheets for Dcl

TS EN 62922 Organic light emitting diode (OLED) panels - for general lighting - Performance requirements

TS EN 61534-21 Powerline systems - Part 21: Related specifications of powerline systems intended for wall and ceiling installation

TS 278 EN 60064: 2004 / T1 Lamps - Tungsten filament - Used for general lighting in homes and similar places - Performance characteristics

TS 895 EN 60188 Lamps - High pressure mercury vapor - Performance requirements

TS 897 EN 60192 Lamps - Low pressure sodium vapor - Performance requirements

TS 8707 EN 60598-2-18 Lighting fixtures - Part 2: Particular requirements - Part 18: Used in swimming pools and similar places

TS 8708 EN 60598-2-19 / T1 Lighting fixtures section 2: special rules section nineteen safety regulations on air conditioning systems

TS 8716 EN 60634 Lamps - Characteristics of heat source lamps used in warming experiments of luminaires

TS 9552 EN 60682 Lamps-Electrically operated-Quartz-Tungsten halogen-Throat temperature measurement method

TS 9569 EN 60357 Lamps - Tungsten halide (other than vehicle lamps) - Performance characteristics

TSE EC / 98 / 11: 2001 Commission regulation energy labeling 92 January 75 date and 27 / 1998 / at regulation on the implementation of council regulation 98 / 11 / at on energy labeling of household bulbs

TS 9918 EN 60901 Lamps - Single head fluorescent - Performance characteristics

TS 9918 EN 60901 / T1 Lamps - Single head fluorescent - Performance rules amended 1

TS EN 13032-2 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor workplaces "

TS EN 50107-1 Marking and luminous discharge tube installations - No-load rated output voltage exceeding 1kv does not exceed 10 kv - Part 1: General specifications

TS EN 50107-2 Marking and luminous discharge tube installations - No-load rated output voltage exceeding 1 kv - not exceeding 10 kv - Part 2: Specification for earth leakage and open circuit protection devices

TS EN 50107-1 / A1 Marking and luminous discharge tube installations - No-load rated output voltage exceeding 1kv does not exceed 10 kv - Part 1: General specifications

TS EN 50285 Lamps - Methods for measuring the energy efficiency of electric lamps used in homes and similar places

TS EN 50294 Lamps - Method for measuring total input power in ballast / lamp circuits

TS EN 50294 / A2Lamps - Method of measuring total input power in ballast / lamp circuits

TS EN 60061-4 / tst A1Light caps and brackets -with gauges for checking interchangeability and safety -Chapter 4: General information and guide

TS EN 60061-4 / tst A2Light caps and brackets -with gauges for checking interchangeability and safety -Chapter 4: General information and guide

TS EN 60061-4 / tst A3Light caps and brackets -with gauges for checking interchangeability and safety -Chapter 4: General information and guide

TS EN 60061-3 / tst A2Light caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A3Light caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A4Light caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A5Light caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A6Light caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A29 Lamp caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A30 Lamp caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A31 Lamp caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-3 / tst A32 Lamp caps and brackets - Part with gauges for checking interchangeability and safety 3: Gages

TS EN 60061-1 / tstA43 Lamp caps and brackets - with gauges for interchangeability and safety check - Part 1: Lamp caps

TS 278 EN 60064 / A11 Lamps - Tungsten filament - Used for general lighting in homes and similar places - Performance characteristics

TS EN 60064 / A5 Lamps - Tungsten filament - Used for general lighting purposes in home and other places - Performance characteristics

TS EN 60081 / A3Lamps - Fluorescent double head - Performance characteristics

TS EN 60081 / A2Lamps - Fluorescent double head - Performance characteristics

TS EN 60081 / A1 Lamps - Fluorescent double head - Performance characteristics

TS EN 60081 / A4 Lamps - Fluorescent double head - Performance characteristics

TS 9569 EN 60357 / A2Lamps - Tungsten halide (excluding vehicle lamps) - Performance characteristics

TS HD 60364-5-52 Low-voltage electrical installations - Part 5-52: Selection and installation of electrical equipment - Connection systems

TS EN 62384 / A1 Electronic control with direct current (da) or alternating current (aa) supply for light emitting diode (led) modules - Performance characteristics

TS EN 60604 Headlamp / filip filash photography flash lamp arrangement

TS EN 60630 Lamps - Incandescent filament - The largest external dimensions of the lamp

TS EN 60630 / A6 Lamps - Incandescent filament - The largest external dimensions of the lamp

TS 9918 EN 60901 / A3 Lamps - Single head fluorescent - Performance characteristics

TS EN 60921 Ballasts - for tubular fluorescent lamps - Performance characteristics

TS EN 60923 Auxiliary equipment for lamps - Ballasts - For discharge lamps (other than tubular fluorescent lamps) - Performance characteristics

TS EN 60923 / A1 Auxiliary equipment for lamps - Ballasts - For discharge lamps (other than tubular fluorescent lamps) - Performance characteristics

TS EN 60983 Lamps-Miniature type

TS EN 60983 / A1 Lamps - Miniature type

TS EN 61228 Method for determining and measuring the UV radiation of ultraviolet lamps used for solar combustion

TS EN 61347-2-1 Lamp control - Part 2-1: Starting devices other than luminous starters) - Specific features

TS EN 61347-2-2: 2001 / A1: 2006 / AC: 2006 Lamp control scheme - Part 2-2: Electronic reducer transducers with or without power supply for filament lamps - Specific features

61347-2-2: 2001 / AC: 2010 Lamp control scheme - Part 2-2: Electronic downconverters for filament lamps or with aa power supply - Specific features

61347-2-8: 2001 / AC: 2003 Lamp control - Part 2-8: Ballasts for use with fluorescent lamps - Specific features

TS EN 61822 Electrical installations - for lighting and signal lights in airports - Constant current regulators

TS EN 61823 Electrical installations - for lighting and signal lights in airports - Agl series transformers

TS EN 62386-205 Digital addressable lighting interface - Part 205: Specific features for the control pattern - Supply voltage control pattern for incandescent filament lamps (type4 device)

TS EN 62386-101 Digital addressable lighting interfaces - Part 101: General requirements - System

TS EN 62386-208 Digital addressable illumination interfaces - Part 208: Particular requirements for the control gear - Switching function (device type 7)

TS EN 62386-102 Digital addressable lighting interfaces - Part 102: General requirements - Control gear

TS EN 62386-202 Digital addressable lighting interfaces - Part 202: Particular requirements for the control gear - With own emergency lighting (device type 1)

TS EN 62386-204 Digital addressable lighting interfaces - Part 204: Particular requirements for control gear - Low voltage halogen bulbs (device type 3)

TS EN 62386-203 Digital addressable lighting interfaces - Part 202: Particular requirements for control gear - Discharge bulbs (device type2)

TS EN 62386-210: 2011 Digital addressable lighting interface - Part 210: Specific features for the controller - Symbols (type 9 device) "

TS EN 62386-201 Digital addressable illumination interfaces - Part 201: Particular requirements for control gear - Forescent bulbs (device type 0)