Electrical Engineering (General) Standards

In compliance with the requirements of the sector conditions, we carry out all your operations in the following electrical engineering standards regarding the necessary regulations.

TS EN 60870-2-1 Remote-controlled devices and systems-Part 2: Operating conditions-Part 1: Power supply and electromagnetic compatibility

TS EN 61000-2-9 Electromagnetic compatibility (emu) - Section 2: Environment - Section 9: Explanation of the hemp environment - Diffuse degradation - Basic emv emission

TS EN 61543 Electromagnetic compatibility - Residual current protective devices (rcd) - Used in homes and similar places

TS EN 61293 Marking of electrical equipment with rated values for electrical supply - Safety regulations

TS EN 80416-2 Basic principles for graphic symbols used in hardware - Part 2: Arrow formats and use of arrows

TS 3033 EN 60529 / T1 Protection degrees provided by enclosures IP code) (electrical equipment) modified 1

TS EN 80416-3 Basic principles for graphic symbols used on hardware - Part 3: Guidelines for the application of graphic symbols

TS EN 61543: 1998 / A11 Electromagnetic compatibility - Residual current protective devices (rcd) - Used in homes and similar places (modified 11)

TS EN 60300-1 Reliability management - Part 1: Reliability systems

TS 3033 EN 60529 / T2The degree of protection provided by enclosures IP code) (in electrical equipment)

TS EN 60695-11-5 "Fire hazard tests - Test flames - Needle flame test method - Tools, test setup and guidance for verification"

TS EN 60695-6-1 Fire hazard test - Part 6-1: Smoke opacity, general guide

TS EN 61034-1 Measurement of smoke density of burning cables under specified conditions - Part 1: Test equipment

TS EN 61034-2 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules

TS EN 60332-2-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-2: Vertical flame propagation test for a single insulated small wire or cable - Process for diffusion flame

TS EN 60332-2-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-1: Vertical flame propagation test for a single insulated small wire or cable - Equipment

TS EN 60332-1-3 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles

TS EN 60332-1-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame

TS EN 60332-1-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment

TS IEC 60050-191 + A1 + A2 International Electrotechnical Glossary - Part 191: Work safety and service quality

TS EN 62308 Hardware compliance - Alert assessment methods (ie 62308: 2006) / note: Approval statement

TS EN 61025 Error tree analysis (FTA)

TS EN 62347 System dependency features guide

TS EN 61076-1 Qualified connectors for direct current (da), low frequency analog and digital high speed data applications - Part 1: General specifications

TS EN 61547 Devices for general illumination purposes - Emu immunity rules

TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables installed vertically - Equipment

TS 4490 EN 60404-2 Magnetic materials - Part 2: Methods for measuring the magnetic properties of electrical steel sheets and strips by means of the epstein frame

TS EN 10331 Magnetic materials - Properties for sintered soft magnetic materials

TS EN 60404-14 Magnetic materials - Part 6: Methods for measuring the magnetic dipole moment of a sample of ferromagnetic material by withdrawal or rotation

TS EN 60404-5 Magnetic materials - Part 5: Permanent magnetic (magnetically hard) materials - Method for measuring magnetic properties

TS 4492 EN 60404-4 / A2 Magnetic materials - Part 4: Methods for measuring magnetic properties of magnetic soft materials in direct current

TS 4490 EN 60404-2 / A1 Magnetic materials - Part 2: Methods for measuring the magnetic properties of electrical steel sheets and strips through the epstein frame

60404 - 4 / A2 Magnetic materials - Part 4: Methods for measuring magnetic properties of magnetic soft materials in direct current.

TS EN 60404-2 / A1 Magnetic materials - Part 2: Methods for measuring the magnetic properties of electrical steel sheets and strips through the epstein frame

TS EN 60404-15: 2012Magnetic materials - Part 15: Methods for the determination of relative magnetic permeability of weak magnetic materials

TS EN 60404-11 Magnetic materials - Part 11: Test method for determining the surface insulation resistance of magnetic sheets and strips

TS EN 10251 Magnetic materials - Determination of geometric properties of electrical plates and bands

TS EN 10330 Magnetic materials - Method for measuring the magnetizing field strength in magnetic materials in an open magnetic circuit

TS EN 60404-1 Magnetic materials - Part 1: Classification

TS EN 60404-15: 2012 / A1 Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of weak magnetic materials

TS 4492 EN 60404-4 Magnetic materials - Part 4: Methods for measuring magnetic properties of magnetic soft materials in direct current.

TS 4491 EN 10280 + A1 Magnetic materials - Methods for measuring the magnetic properties of magnetic sheets and strips using a single-layer test device

TS EN 10331 Magnetic materials - Properties for sintered soft magnetic materials

TS EN 10342 Magnetic materials - Classification of surface insulations of electrical steel plates, strips and films

TS EN 60404-6 Magnetic materials - Part 6: Method of measuring the magnetic properties of magnetically soft metal and powder materials using frequencies in the range 20 hz to 200 khz using ring samples

TS EN 60404-13 Magnetic materials - Part 13: Electrical loading factor, density and resistance measurement methods of electrical steel sheets and strips

TS EN 60404-8-6 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic materials

TS EN 60556 gyromagnetic materials-For application at microwave frequencies - Measurement methods for properties

TS EN 61333 Ferrite materials - Marking of U and e cores

TS EN 62044-2 Cores made of soft magnetic materials - Measurement methods - Part 2: Magnetic properties at low excitation level

TS EN 62317-7: 2005 Ferrite Extracts-Dimensions - Part 7: Eer - Extracts

TS EN 60332-3-21 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-21: Test for vertical flame spread of bundled wires or cables vertically mounted - Category af / r

TS EN 60332-3-22 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-22: Vertical flame spread test of bundled wires or cables vertically - Category a

TS EN 60332-3-23 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flammability of vertically mounted bundled wires or cables - Category b

TS EN 60332-3-25 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-25: Vertical flame propagation test of bundled wires or cables vertically mounted - Category d

TS EN 60332-3-24 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-24: Vertical flame propagation test of bundled wires or cables vertically mounted - Category c

TS EN 60695-11-5 Fire hazard test - Part 11-5: Test flames - Needle flame test method - Devices, verification test set-up and guidance

TS EN 61547 Equipment for general lighting purposes - Emu immunity rules

TS EN 60196 IEC standard frequencies

TS EN 60332-3-21 Cables - Tests in electrical and fiber optic cables under fire conditions - Part 3-21: Test for vertical flame spread of bundled wires or cables vertically mounted - Category af / r

TS EN 60332-3-25 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category d

TS EN 60204-32 Safety in machinery - Electrical devices in machinery - Part 32: Requirements for hoisting machines

TS EN 60204-1 Safety on machinery - Electrical equipment of machines - Part 1: General requirements

TS EN 60204-1 / A1 Safety on machinery - Electrical equipment of machines - Part 1: General requirements

TS EN 50160: 2010 Voltage characteristics - for power supply from the general distribution system

TS EN 60695-1-30: 2008 Fire hazard tests - Part 1-30: manual for assessing the fire hazard of electrotechnical products - General guide

TS EN 62508 Guidance on humanitarian aspects

TS EN 60695-7-1 Fire hazard test - Part 7-1: Toxicity of products released by combustion - General guide

TS EN 80416-1 Basic principles for graphic symbols used on hardware - Part 1: Creating symbol basic drawings

TS EN 60445 Basic and safety principles for human-machine interface, marking and identification - Description of hardware terminals, conductor termination devices and conductors

TS EN 61543 / AC Electromagnetic compatibility - Residual current protective devices (rcd) - Used in homes and similar places

TS EN 60445 Basic and safety principles for human-machine interface, marking and identification - Introduction to the connection of device terminals and conductors with special indication, including general rules for an alphanumeric system

TS EN 62305-1 Lightning protection - Part 1: General rules

TS EN 62305-4 Lightning protection - Part 4: Electrical and electronic systems in buildings

TS EN 60204-1 / AC Safety in machinery - Electrical equipment of machines - Part 1: General requirements

TS EN 62305-3 Lightning protection - part 3: Physical damage to buildings and life-threatening

TS EN 60204-1 / AC Safety in machinery - Electrical equipment of machines - Part 1: General requirements

tst EN 50102 Enclosure protection degree - For protection of electrical equipment against external mechanical impacts - (code)

TS EN 50102 / tstA1 Degree of protection of enclosures - for protection of electrical equipment against external mechanical impacts - (code)

TS EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility Product family standard: Immune properties for components of components of fire burglar and general purpose alarm systems

TS EN 50130-5 Alarm systems - Part 5: Environmental resistance test methods

TS EN 61543 / A2 Electromagnetic compatibility - Residual current protective devices (rcd) - Used in homes and similar places

TS EN 61543 / A12 Electromagnetic compatibility - Residual current protective devices (rcd) - Used in homes and similar places

TS EN 60038 CENELEC standard voltages (IEC 60038: 2009, modified)

TS EN 60695-7-2 Fire hazard test - Part 7-2: Toxicity of combustion products-Summary and relevance of test methods

TS EN 60695-6-2 Fire hazard test - Part 6-1: Smoke obstruction of vision - Summary and relevance of test methods

TS EN 60674-3-1 / A1 Plastic films for electrical purposes - Part 3: Material specifications - Data sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

TS EN 60038 Cenelec standard voltages

60695-6-1: 2005 / A1 Fire hazard test - Part 6-1: Visibility blocking by smoke - General guide

TS EN 60695-2-12 Fire hazard test - Part 2-12: Test methods based on glow / hot wire - Method for flammability test with glow-wire for materials

TS EN 60695-2-13 Fire hazard test - Part 2-13: Test methods based on glow / hot wire - Flammability test method for glow-wire for materials

TS EN 62023: 2012 (EN) Configuring technical information and documentation

TS EN 62027 This standard provides rules for the preparation of parts lists.

TS EN 60695-7-3 Fire hazard test - Part 7-2: Toxicity of combustion products-Use and cycle of test methods

TS EN 62305-2 Lightning protection - Part 2: Risk management

TS EN 62262 (Former No: TS EN 50102 + A1) Degree of protection provided by enclosures - for protection of electrical equipment against external mechanical impacts (IK Code)

TS EN 62305-3 / tst A11 Lightning protection - Part 3: Physical damage to buildings and life-threatening

TS EN 62561-7 Lightning protection system components (lpsc) - Part 7: Features for improvement of grounding components

TS EN 62305-3 Lightning protection - Part 3: Physical damage to buildings and life-threatening

TS EN 60695-11-3 Fire hazard test - Part 11-3: Test flames - 500 W flame - Equipment and verification test methods

TS EN 60695-4 Fire hazard test - Part 4: Terminology for fire tests for electrotechnical products (IEC 60695-4: 2012)

TS EN 62305-2 Lightning protection - Part 2: Risk management

TS EN 50581 Technical documentation for the inspection of electrical and electronic products to be kept away from explosive atmospheres

TS EN 62561-1 Lightning protection system components (YKSB) - Part 1: Specification for fasteners

TS EN 62561-2 Lightning protection system components (YKSB) - Part 2: Specification for conductors and grounding electrodes

TS EN 62561-3 Lightning protection system components (YKSB) - Part 3: Specification for spark gap insulation gaps

TS EN 60695-4 Fire hazard test - Part 4: Terms and definitions of fire tests for electrotechnical products

TS EN 82079-1 Preparation of instructions for use - Structure, content and presentation - Part: 1 General rules and detailed requirements

TS EN 50160 / AC Voltage characteristics of the electricity supplied by the public electricity networks

TS EN 60332-3-23 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flame spread of bundled wires or cables vertically mounted - Category b

TS EN 60204-1 Safety in machinery - Electrical equipment of machinery - Part 1: General rules

TS EN 50121-1 Railway applications - Electromagnetic compatibility - Part 1: General

TS EN 50121-2 Railway applications - Electromagnetic compatibility - Part 2: Extension of the entire railway system to the outside world

TS EN 62305-1 Lightning protection - Part 1: General rules

TS EN 62305-4 Lightning protection - Part 4: Electrical and electronic systems in buildings

TS EN 60068-2-78 Environmental resistance tests - Section 2-78: Tests - Test Cab: Age temperature, steady state

TS EN 60848 Features GRAFCET language for sequential function charts

TS EN 60695-2-10 Fire hazard test - Part 2-10: Test methods based on glow wire / hot wire - Glow wire device and joint test procedure

60068-2: 55 - 2013-2: Experiments - Experiment Ee and guide - Loose cargo tests including splash

Environmental resistance tests - Section 60068-2: Tests - Test Fg: Vibration - Acoustic induction method

TS EN 60059 / A1 IEC standard current rating

Marking of electrical and electronic equipment according to TS EN 50419 2002 / 96 / ec directive (weee) article 11 (2)

TS EN 60695-9-1 Fire hazard test - part 9-1: Spreading the flame on the surface - General guide

TS EN 81346-2 Industrial systems, installations, equipment and industrial products - Structuring principles and reference introductions - Part 2: Classification of objects and codes related to classes

TS EN 50121-2 Railway applications - Electromagnetic compatibility - Part 2: Extension of the railway system as a whole

TS EN 50121-1 / AC Railway applications - Electromagnetic compatibility - Part 1: General

TS EN 61034-2 / A1 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules

TSE CLC / TR 50422 Application guide to EN 50160 standard

TS EN 60695-11-10 Fire hazard test - Part 11-10: Test flames - Horizontal and vertical flame test methods of 50 w

TS EN 60529 / A2 The degree of protection provided by enclosures (IP code)

TS EN 60695-1-30 Fire hazard test - Part 1-30: Guide for the assessment of the fire hazard of electrotechnical products - Pre-screening test procedure - General Guide (IEC 60695-1-30: 2008)

TS EN 62542 Environmental standardization for electrical and electronic products and systems - Glossary of terms

TS EN 60695-7-3 Fire hazard test - Part 7-3: Toxicity of combustion products -Interpretation and use of test results (IEC 60695-7-3: 2011)

TS EN 60695-7-2 Fire hazard test - Part 7-2: Toxicity of combustion products-Summary and relevance of test methods

TS EN 60695-2-12 Fire hazard test - Part 2-12: Test methods based on incandescent / hot wire - Incandescent flammability index (GWFI) test method for materials

TS EN 50121-2 / AC Railway applications - Electromagnetic compatibility - Part 2: Extension of the railway system as a whole

TS EN 50121-1 Railway applications - Electromagnetic compatibility - Part 1: General

TS EN 61936-1 Power plants exceeding 1 kv a.a - Part 1: General requirements

TS EN 61936-1: Power plants exceeding 2010 / A1 1 kv a.a - Part 1: General requirements

TS EN 60695-9-2 Fire hazard test - Part 9-2: Spread of flame on the surface - Summary and relationship of test methods (IEC 60695-9-2: 2014)

TS EN 60695-2-12 / A1Fire hazard test - Part 2-12: Test methods based on glow / hot wire - Method for flammability test with glow-wire for materials

60695-2-13: 2010 / A1 Fire hazard test - Part 2-13: Test methods based on glow / hot wire - Flammability test method with glow-wire for materials

TS EN 60695-10-2 Fire hazard test - Part 10-2: Ball pressure test method (IEC 60695-10-2: 2014)

TS EN 60695-2-11 Fire hazard test - Part 2-11: Test methods based on glow / hot wire - Glow wire flammability test method for final products (GWEPT) (IEC 60695-2-11: 2014)

TS IEC 60050-151 International Electrotechnical Glossary - Part 151: Electrical and magnetic devices

TS IEC 60050-131 International Electrotechnical Glossary - Part 131: Circuit Theory

TS EN 60695-1-40 Fire hazard test - Part 1-40: Guidance for evaluating the fire hazard of electrotechnical products - Insulating liquids

tst EN 61936-1 Power plants exceeding 1 kv a.a - Part 1: General requirements

TS EN 61936-1: Power plants exceeding 2011 / tstA1 1 kv a.a - Section 1: General requirements

TS EN 61936-1: Power plants exceeding 2011 / tstAC 1 kv a.a - Section 1: General requirements

TS EN 50130-4 / A1 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity rules for components of fire, intrusion, panic alarm, CCTV, access control and social alarm systems

60695-11-10: 2013 / AC Fire hazard test - Part 11-10: Test flames - Horizontal and vertical flame test methods of 50 w

tst EN 60695-10-2 Fire hazard test - Part 10-2: Ball pressure test method (IEC 60695-10-2: 2014)

tst EN 60695-11-10 Fire hazard test - Part 11-10: Test flames - Horizontal and vertical flame test methods of 50 w

TS EN 61034-2 / A1 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules

tst EN 60695-1-40 Fire hazard test - Part 1-40: Guidelines for assessing the fire hazard of electrotechnical products - Insulating liquids

TS EN 60695-2-11 Fire hazard test - Part 2-11: Test methods based on incandescent / hot wire - Flammability test method with incandescent wire for final products (IEC 60695-2-11: 2014)

TS EN 60695-2-12 / A1Fire hazard test - Part 2-12: Test methods based on incandescent / hot wire - Incandescent flammability index (GWFI) test method for materials

TS EN 60695-2-13 Fire hazard test - Part 2-13: Test methods based on incandescent / hot wire - Ignition temperature (GWIT) test method for materials (IEC 60695-2-13: 2010)

60695-2-13 / A1 Fire hazard test - Part 2-13: Test methods based on incandescent / hot wire - Ignition temperature (GWIT) test method for materials (IEC 60695-2-13: 2010) : 1

tst EN 60695-9-2 Fire hazard test - Part 9-2: Spread of flame on the surface - Summary and relationship of test methods (IEC 60695-9-2: 2014)

TS EN 62561-1 Lightning protection system components (LPSC) - Part 1: Requirements for connection components

TS EN 62561-2 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and grounding electrodes (IEC 62561-2: 2012, modified)

TS EN 62561-3 Lightning protection system components (LPSC) - Part 3: Requirements for insulating arc horns (IEC 62561-3: 2012, modified) 24.11.2015

TS EN 62561-7 Lightning protection system components (LPSC) - Part 7: Rules on earth-strengthening compounds (IEC 62561-7: 2011, modified)

TS EN 50160 / A1 Voltage characteristics of the electricity supplied by the public electricity networks

TS EN 61340-4-4 / A1 Electrostatic - Part 4-4: Standard test methods for special applications - Electrostatic classification of flexible medium volume containers (FIBC)

61340-4-8 Electrostatic - Part 4-4: Standard test methods for special applications - Electrostatic discharge shielding - Bags

TS EN 61082-1 Preparation of documents used in electrotechnics section 1: General rules

TS EN 50419 Marking of electrical and electronic equipment in accordance with Article 2002 (96) of Directive 11 / 2 / EC (AEEE)

TS EN 50121-3-1 Railway applications - Electromagnetic compatibility - Part 3-1: The entire train and vehicle

TS EN 50121-3-2 Railway applications - Electromagnetic compatibility - Part 3-2: Train - Equipment

TS EN 50121-5 Railway applications - Electromagnetic compatibility - Part 5: Propagation and immunity of fixed power supply installations and devices

TS EN 60695-11-20 Fire hazard test-Part 11-20: Test flames-500 W flame test methods

TS EN 61175-1 Industrial systems, installations and equipment and industrial products - Brief indication of signs - Part 1: Basic requirements

TS EN 62061: 2005 / A2Machine safety - Functional safety of safety-related electrical, electronic and programmable electronic control systems

TS EN 62559-2 Usage case methodology - Part 2: Template description for usage cases, actor list and requirements list

TS EN 62561-4 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners (IEC 62561-4: 2010, modified)

TS EN 62561-5 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection enclosures and earth electrode seals (IEC 62561-5: 2011, modified)

TS EN 62561-6 Lightning protection system components (LPSC) - Part 6: Rules on lightning impact counters (LSC) (IEC 62561-6: 2011, modified)

tst EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility Product family standard: Immune properties for components of components of fire burglar and general purpose alarm systems

TS EN 50130-4 / tstA1 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity rules for components of fire, intrusion, panic alarm, CCTV, access control and social alarm systems

tst EN 60695-2-10 Fire hazard test - Part 2-10: Test methods based on incandescent / hot wire - Incandescent-wire assembly and joint test procedure (IEC 609695-2-10)

TS EN 60695-11-20 / AC Fire hazard test-Part 11-20: Test flames-500 W flame test methods

TS EN 60754-2 Testing of gases released during combustion of materials used in cables - Part 2: determination of acidity and conductivity (by pH measurement)

TS EN 60332-1-1 / A1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment

TS EN 60332-1-2 / A1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame

TS EN 60332-1-3 / A1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles

TS EN 60695-1-11 Fire hazard test section 1-11: Guidance for fire hazard detection of electrotechnical products - Fire hazard assessment

TS EN 62858 Lightning intensity (LLC) based on lightning protection systems - General rules

TS EN 61340-4-6 Electrostatic - Part 4-6: Standard test methods for specific applications - Wristbands

TS EN 61340-5-3 Electrostatic-Part 5-3: Protection of electronic devices from electrostatic effect - Specification and classification for electrostatic discharge precision devices

TS EN 61340-2-1 Electrostatic - Part 2-1: Measurement methods - the ability to distribute the static charge of materials and products

TS EN 61140 Protection against electric shock - common features for installations and equipment

TS EN 62493 Inspection of illumination equipment for people exposed to electromagnetic fields

TS EN 60695-1-20 Fire hazard test section 1-20: Guide for fire hazard detection of electrotechnical products - Flammability - General guide

TS EN 60754-2 Testing of gases released during combustion of materials used in cables - Part 2: determination of acidity and conductivity (by pH measurement)

60068-3 - 5-3: 5-XNUMX: Testing of auxiliary materials and guide-temperature test chambers

TS EN 60332-1-2 / A11 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame

TS EN 62305-1 / AC Lightning protection - Part 1: General rules

TS EN 62305-4 / AC Lightning protection - Part 4: Electrical and electronic systems in buildings

TS IEC 60050-191 + A1 + A2 International Electrotechnical Glossary - Part 191: Work safety and service quality

TS EN 60695-1-21 Fire hazard test - Part 1-3: Guidance for fire hazard detection of electrotechnical products - Flammability - Summary and suitability of test methods

TS EN 60695-10-3 Fire hazard test - Part 10 - 3: Abnormal temperature - Deformation test that removes mold tension

TS EN 61340-4-9 Electrostatic - Part 4-9: Standard test methods for special applications - Garments

TS EN 61340-2-3 Electrostatic Section 2-3: Test methods for determining the resistance and resistivity of hard planar material used to avoid electrostatic charge accumulation

TS EN 61340-5-1 Electrostatic-Part 5-1: Protection of electronic devices from electrostatic effect-General requirements

TS 3033 EN 60529 / A2 Degree of protection provided by enclosures (IP code)

TS EN 60529: Degree of protection provided by 1991 / AC Enclosures (IP code)

TS EN 61340-4-7 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization

TS EN 60695-8-1 Fire hazard test - Part 8 - 1: Heat release - General guide

TS EN 60695-1-10 Fire hazard test section 1-10: Guide to the assessment of the fire hazard of electrotechnical products - General guide

TS EN 60695-8-2 Fire hazard test - Part 8 - 2: Heat release - Summary and relevance of test methods

TS EN 50160 Voltage characteristics of the electricity supplied by the public electricity networks

TS EN 50162 Corrosion protection from direct current systems

TS EN 50191: 2010 Installation and operation of electrical test equipment

TS EN 60027-1 Letter symbols used in electrical technology - Part 1: General

TS EN 60027-1 / A2 Letter symbols used in electrical technology - Part 1: General

TS EN ISO 8199 Water quality - Census of microorganisms through culture general rules

TS ISO 9059 Calibration of field pyromyometers by comparison with solar reference pyromyometer

Determination of microorganisms (lactobacillus delbrueckii subsp. Bulgaricus and streptococcus thermophilus) in yogurt

TS ISO 9252 Synthetic rubber latex-Microbiological inspection

TS EN ISO 9308-3 Water quality-Detection and enumeration of escherichia coli and coliform bacteria in surface and wastewater-Part 3: Inoculation in liquid media (most probable number)

TS EN ISO 9308-3 / AC Water quality-Detection and enumeration of escherichia coli and coliform bacteria in surface and waste waters

TS EN ISO 9408 Water quality - Assessment of the ultimate aerobic biodegradability of organic compounds in aqueous media by determination of oxygen demand in a closed respirometer

TS EN ISO 9439 Water quality - Evaluation of final aerobic biodegradability of organic compounds in aqueous media - Determination of released carbon dioxide

TS ISO 9845-1 Solar energy - On earth - Under different receiving conditions - Reference solar spectral radiation - Part 1: Direct normal and hemispherical radiation for 1,5 air absorption coefficient

TS EN ISO 9887 Water quality-Determination of aerobic biodegradability of organic compounds in aqueous medium semi-continuous activated sludge method

TS EN ISO 10273 Food and animal feed microbiology - Horizontal method for identifying possible cause of disease yersinia enterocolitica

TS EN ISO 10705-1 Water quality - Detection and enumeration of bacteriophages section 1: Enumeration of specific bacteriophages

TS EN ISO 10705-2 Water quality - Detection and counting of bacteriophages section 2: Counting somatic coliphages

TS ISO 10707: 1996 / T1 (Number modification, TS EN ISO 10707) Water quality - Assessment of the aerobic biological degradability of organic compounds in aqueous media - Determination of biochemical oxygen demand

TS ISO 10708 Water quality - Evaluation of the final aerobic biodegradability of organic compounds in aqueous media - Determination of biochemical oxygen demand in a two-phase sealed bottle test

TS EN ISO 10712 Water quality-Pseudomonas putida inhibition test

Generation of metal nanoparticles for respiration toxicity testing using the evaporation / condensation method

TS EN ISO 11290-2 Microbiology of food and animal feeds - Horizontal method for the detection and counting of Listeria monocytogenes section 2: Counting method

TS EN ISO 11290-1 / A1 Microbiology of food and feedstuffs - Finding and counting Listeria monocytogenes method 1: Search method

TS EN ISO 11290-2 / A1 Microbiology of food and animal feeds - horizontal method for the detection and counting of Listeria monocytogenes section 2: Counting method

TS ISO 11731 Water quality - detection and counting of Legioella

TS EN ISO 11731-2 Water quality - Determination and enumeration of ligionella - Part 2: Direct membrane filtration method for water containing low numbers of bacteria

TS EN ISO 11734 Water quality-Evaluation of final biodegradability of organic compounds in airless environment in treated sludge -Method of biogas produced

TS EN ISO 11737-1 Sterilization of medical devices - Microbiological methods - Part 1: Determination of the population of microorganisms on the product

TS EN ISO 11737-1 / AC Sterilization of medical devices - Microbiological methods - Part 1: Determination of the population of microorganisms on the product

TS EN 12075 Biotechnology - Large-scale process and production - Processes for fermentation and subsequent processes

TS EN 12297 Biotechnology-Equipment - Guidance on testing procedures for sterilization

TS EN 12298 Guidance on testing procedures for biotechnology, equipment and sealing

TS EN 12305 Biotechnology - Modified organisms for application in the environment - Guidance on exemplary strategies for purposeful release of genetically modified plants

TS EN 12306 Biotechnology - Guidance for quality control of diagnostic tools for environmental gathering, disease control, plant and animal pests and agriculture

TS EN 12307 Biotechnology - Large scale process and production - Good working procedures for personnel - Training and control guide

TS EN 12322 Extracorporeal medical diagnostic devices - Microbiology culture media - Performance criteria of culture media

TS EN 12461 Biotechnology - Large scale process and production - Guidance for processing, inactivation and testing of waste

TS EN 12462 Pumps - Performance criteria for biotechnological pumps

TS EN 12468 Biotechnology - Guidance on monitoring strategies for purposeful release of modified plants for application in the environment.

TS EN 12469 Biotechnology - Performance characteristics for microbiological safety cabinets

TS EN 12682 Biotechnology - Modified organisms for application in the environment - Guidance for characterizing a genetically modified organism by analysis of functional expression of genetic change

TS EN 12683 Biotechnology - Modified organisms for application in the environment - Guidance for characterizing the genetically modified organism by analysis of the molecular balance of genetic change

TS EN ISO 12683 Mechanical deposited zinc coatings - Properties and test methods

TS EN 12686 Biotechnology - Modified organisms for application in the environment - Guidance on exemplary strategies for purposeful release of genetically modified organisms including viruses

TS EN 12690 Biotechnology - Body filling performance criteria

TS EN 12738 Biotechnology - Research, development and analysis laboratories - Guidance on microorganisms and inoculated animals used in experiments

TS EN 12740 Biotechnology - Research, development and analysis laboratories - Guidance on inoculated animals and waste testing

TS EN 12741 Biotechnology - Laboratories for research, development and analysis - Guidelines for the operation of biotechnology laboratories

TS EN 12884 biotechnology - Performance criteria for centrifuges

TS EN 13091 Biotechnology - Performance criteria for filtration equipment and filter elements

TS EN 13092 Biotechnology - Device - Guide for sampling and inoculation

TS EN 13095 Biotechnology - Performance criteria for non-gas systems

TS EN 12884 biotechnology - Performance criteria for centrifuges

TS EN 13091 Biotechnology - Performance criteria for filtration equipment and filter elements

TS EN 13092 Biotechnology - Device - Guide for sampling and inoculation

TS EN 13095 Biotechnology - Performance criteria for non-gas systems

TS EN ISO 13720 Meat and meat products - Possible pseudomonas spp count

TS ISO 13722 Meat and meat products - Counting of Brochothrix thermosphacta - Colony counting technique

TS EN 13783 Foodstuffs - Determination of irradiated foods using direct epifluorescence filtration technique / aerobic plate count (deft / apc) - Screening method

TS EN 13798: 2010 Hydrometer - Trough specification for reference rain meter

TS EN 14119 Textile tests - Evaluation of mushroom effect

TS EN 14131 Foods - Determination of folate by microbiological analysis

TS EN 14166 Foodstuffs - Determination of vitamin b6 by microbiological test

TS EN 14486 Water quality - Diagnosis of viruses affecting human digestive systems with monolayer plate samples

TS EN 14569 Flexible floor coatings - Floor coatings coated with synthetic thermoplastic polymers - Detailed specifications

TSE ISO / TR 15462 Water quality - Selection of experiments for determination of biodegradability

TS EN 15518-2: 2011 Winter maintenance equipment-Road weather information systems-Part 2: Road weather-Recommended observation and forecasting

TS EN 15518-3: 2011 Winter maintenance equipment-Road weather information systems-Part 3: Characteristics of measured values of stationary equipment

TS EN 15518-1: 2011 Winter maintenance equipment-Road weather information systems-Part 1: Global recipes and components

TS ISO 15522 Water quality - Determination of the inhibitory effect of water components on the growth of activated sludge microorganisms

TS EN 15634-1 Foodstuffs - Determination of food allergens by molecular biology methods - Part 1: General rules

TS EN 15845 Paper and cardboard - Determination of cytotoxicity of aqueous extracts

TS EN ISO 15927-2 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 2: Hourly data for the design of the cooling load

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Calculation of wind-driven rain index from hourly wind and rain data for vertical surfaces

TS EN ISO 16654 Microbiology of food and animal feed - horizontal method for detection of Eschericha coli 0157

TS ISO 17410 Microbiology of food and animal feed - horizontal method for enumeration of psychrotrophic microorganisms