• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Rotary Machinery Standards

Rotary MachineAll of the procedures specified in the standard application of all the necessary methods are tested by performing the certification process.

 

TS EN 61204 Low-voltage power supplies, also output-Performance characteristics and safety rules

TS 3209 EN 60034-5 Rotary electrical machines - Part 5: Degree of protection (IP code) provided by the whole design of rotary electrical machines -Classification

TS 3211 EN 60034-7 Rotary electrical machines section 7: Classification of construction types, mounting arrangements and terminal box location (im code)

TS 6848 EN 60034-12Rotary electrical machines-Part 12: Starting performance of three-phase cage induction motors with single speed stage

TS EN 45510-2-8 Guidance for the supply of power plant equipment-Electrical equipment-Part 2-8: Power cables

TS EN 60034-14 Rotary electric machines - Part 14: Mechanical vibration on some machines with shaft height 56 mm and higher - Measurement, evaluation and limits of vibration

TS EN 88528-11 Alternating current generator sets driven by reciprocating internal combustion engines - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods

TS EN 60034-11 Rotary electric machines - part 11: Thermal protection

TS EN 60034-9 Rotary electric machines - Part 9: Noise limits

TS EN 60034-14 Rotary electric machines - Part 14: Mechanical vibration on some machines with shaft height 56 mm and higher - Measurement, evaluation and limits of vibration

TS EN 60034-26 Rotating electric machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

TS EN 60335-2-97 Safety regulations - Part for household electrical appliances 2-97: Particular requirements for drives for winding shutters, awnings, sun visors and similar equipment

TS 3209 EN 60034-5 / A1 Rotary electrical machines - part 5: Degree of protection (IP code) provided by the whole design of rotary electrical machines - Classification

TS EN 60034-8 Rotary electric machines - Part 8: Marking of terminals and direction of rotation

TS EN 60027-4 Letter symbols used in electrical technology - Part 4: Rotating electrical machines

TS 6848 EN 60034-12 / A1 Rotary electric machines - part 12: Starting performance of single speed stepped, three-phase cage induction motors

TS EN 60034-9 / A1 Rotary electric machines - Part 9: Noise limits

TS EN 60034-14 / A1 Rotary electrical machines - part 14: Mechanical vibration on some machines with shaft height 56 mm and higher - Measurement, evaluation and limits of vibration

TS EN 60034-8 Rotary electrical machines - part 8: Marking of terminals and direction of rotation

TS EN 62040-1 Uninterruptible power systems (gs) - Section 1: General rules and safety rules for Kgs

TS EN 60335-2-97 / A11 Safety regulations - Part for household and similar electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and the like

TS EN 60034-2-2 Rotary electric machines - Part 2-2: Specific methods for the determination of losses of large machines separate from the tests

TS EN 60034-15 Rotary electrical machines part 15: Impact voltage resistance in rotary ac machines with shaped stator windings

TS EN 62040-2 / AC Uninterruptible power systems (kgc) - Part 2: Electromagnetic compatibility (emu) rules

TS EN 60034-1: 2010 + AC: 2010 Rotary electric machines - Part 1: Declared values ​​and performance

TS EN 60034-9 / A1 Rotary electric machines - Part 9: Noise limits

TS EN 60034-1 Rotary electric machines - Part 1: Declaration characteristics and operating characteristics

TS EN 60349-2 Railway applications-Rotary electrical machines used in rail and road vehicles-Section 2: Alternating current methods fed by electronic exchangers

TS EN 60034-18-32 Rotary electroplating machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for preformed windings - Evaluation with electrical resistance

TS EN 60034-18-34 Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Testing procedures for wire-wound windings - Evaluation of strength according to multiple variables under simultaneous thermal and electrical stresses

TS EN 60034-18-34 Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Testing procedures for wire-wound windings - Evaluation of strength according to multiple variables under simultaneous thermal and electrical stresses

TS EN 60034-18-31 Rotary electrical machines - Part 18: Functional evaluation of insulation systems, part 31: Test operations of shaped windings - Insulation used in machines up to and including 50 mva and 15 kv

TS EN 60034-18-21 Rotary electrical machines - Part 18: Functional evaluation of insulation systems - Part 21: Test procedures for wire-wound windings - Thermal evaluation and classification

TS EN ISO 29461-1 Air suction filters for rotary machines - Test methods - Part 1: Static filter elements

TS EN 60034-14 / A1 Rotating electrical machines - Part 14: Mechanical vibration of some machines with shaft height 56 mm and higher - Limit values ​​of measurement, evaluation and vibration intensity

TS EN 60034-16-1 Rotary electrical machines Section 16-1: Excitation systems for synchronous machines - Definitions

TS EN 60034-28 Rotating electrical machines - Part 28: Test methods for the quantification of equivalent circuit diagram for three-phase low voltage cage induction motors

TS EN 50438 Rules for the parallel connection of micro-generators with low-voltage distribution networks

TS EN 60034-8 / A1 Rotary electric machines - Part 30-8: Marking and direction of connection of terminals - Amendment 1

TS EN 60034-18-41 Rotary electrical machines - Part 18-41: Partial discharge electrical insulation systems used in rotary electrical machines fed by voltage converters (Type I) - Sufficiency and quality control tests

TS EN 60034-30-1 Rotary electric machines - Part 30-1: Efficiency classes for mains-supplied aa motors (IE code)

TS EN 60034-26 / AC Rotary electric machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

TS EN 60034-2-1 Rotary electric machines - Part 2-1: Standard methods for determining losses and yields by tests (except for traction vehicles)

tst EN 50438 Rules for the parallel connection of micro-generators with low-voltage distribution networks  

tst EN 60034-18-41 Rotary electrical machines - Part 18-41: Partial discharge electrical insulation systems used in rotary electrical machines supplied by voltage converters (Type I) - Sufficiency and quality control tests (IEC 60034-18-41: 2014)  

tst EN 62040-1 Uninterruptible power systems (gs) - Section 1: General rules and safety rules for Kgs (IEC 62040-1: 2008 + Corrigendum September 2008)

TS EN ISO 1680 Acoustics - Test code for the measurement of airborne noise from electrical rotary machines

TS ISO 8528-5 Alternating current generator sets driven by reciprocating internal combustion engines - Part 5: Generator sets

tst EN 60034-30-1 Rotary electric machines - Part 30-1: Efficiency classes for mains-powered aa motors (IE code)

TS EN 60034-8 / A1 Rotating electrical machines - Part 8: Marking and direction of rotation of terminals - Modification 1 (IEC 60034-8: 2007 / A1: 2014)

TSE CLC / TS 50549-1 Rules for power plants to be connected in parallel to distribution networks - Part 1: Connection to an LV distribution network on 16 A

TSE CLC / TS 50549-2 Rules for generation plants to be connected in parallel to distribution networks - Part 2: Connection to an MV distribution network

TS EN 60034-19 Rotary electric machines - Part 19: Particular test methods for conventional electric machines and applied to rectifier power supplies

TS EN 50598-1 Power drive systems, motor starters, power electronics and drive applications - Part 1: General rules for the preparation of energy efficiency standards for power drive equipment using the extended product approach (EPA) and semi-analytical model (SAM)

TS EN 50598-2 Power drive systems, motor starters, power electronics and drive applications - Part 2: Energy efficiency indicators for power drive systems and motor starters

TS EN 60335-2-97: 2006 / A12 Safety regulations - Part for household electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and similar equipment

TS ISO 8528-5 Alternating current generator sets driven by reciprocating internal combustion engines - Part 5: Generator sets

TS EN 50598-3 Environmental design for power start systems, motor starters, power electronic systems and their operational applications - Part 3: Quantitative environmental design approach based on lifecycle assessment including the content of environmental communiqués and product category rules

TS ISO 8528-2 Alternating current generator sets driven by reciprocating internal combustion engines - Part 2: Engines

TS ISO 8528-3 Alternating current generator sets driven by reciprocating internal combustion engines - Part 3: Alternating current generators for generator sets

TS ISO 8528-4 Alternating current generator sets driven by reciprocating internal combustion engines - Part 4: Control unit and coupling

TS ISO 8528-6 Alternating current generator sets driven by reciprocating internal combustion engines - Part 6: Test methods

TS ISO 8528-1 Alternating current generator sets driven by reciprocating internal combustion engines - Part 1: Application, declaration values ​​and performance

TS ISO 8528-3 Alternating current generator sets driven by reciprocating internal combustion engines - Part 3: Alternating current generators for generator sets

TS EN 50438 / IS1 Rules for the parallel connection of micro-generators in low-voltage distribution networks

TS EN 50438 / tst IS1 Rules for the parallel connection of micro-generators in low-voltage distribution networks

TS EN 61800-2 Variable speed electric power drive systems - Part 2: General requirements - Characteristics of rated values ​​for low voltage variable frequency aa power drive systems

TS EN 60034-8 / A1 Rotating electrical machines - Part 8: Marking and direction of rotation of terminals - Modification 1 (IEC 60034-8: 2007 / A1: 2014)

TS EN ISO 8528-13 Alternating current generator sets driven by reciprocating internal combustion engine - Part 13: Safety

TS EN 60034-27-3 Rotary electrical machines Part 27-3: Measurement of dielectric loss factor in stator winding insulation of rotary electrical machines

TS EN ISO 8528-13 Alternating current generator sets driven by reciprocating internal combustion engine - Part 13: Safety

TS EN 50598-2 / A1 Power drive systems, motor starters, power electronics and drive applications - Part 1: General rules for the preparation of energy efficiency standards for power drive equipment using the extended product approach (EPA) and semi-analytical model (SAM)

TS EN 50347 Induction motors - Three-phase, standard size and output power, general purpose - Chassis numbers 56 to 315 and flange numbers 65 to 740

TS EN 13444-1 Electrically powered road vehicles - Measurement of emissions of mixed vehicles - Part 1: Thermal-electrically mixed vehicles

TS EN 50209 Insulation test of rods and coils of high-voltage machines

TS EN 60027-3 Letter symbols used in electrical technology - Part 3: Logarithmic and related quantities and units

TS EN 60034-3 Rotary electric machines - Part 3: Particular requirements for synchronous machines with cylindrical rotors

TS EN 60034-4 Rotary electrical machinery part 4 - Methods for determination of synchronous machine sizes from experiments

TS EN 60034-29 Rotary electric machines - Part 29: Equivalent loading and superposition techniques - Indirect method for determining temperature rise

TS EN 60034-22 Rotary electric machines - Part 22: Internal combustion engine drives aa generators

TS EN 60034-18-22 Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Testing procedures for wire-wound windings - Classification of materials and changes that can be used in place of the insulating component

TS EN 61800-4 Speed-adjustable electrical start-up systems - Part 4: General requirements - Specification of rated values ​​for 1 000 v aa and aa starting systems less than 35 kv

TS EN 88528-11 Alternating current generator sets driven by reciprocating internal combustion engines - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods