• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Machinery Safety Standards

Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards. 

 

TS EN 1746 Safety in machinery - Guidance on the preparation of noise-related substances of safety standards

TS EN 60204-11 Safety on machines - Electrical equipment of machines - Part 11: Requirements for high-voltage equipment used for voltages above 1000 v aa or 1500 v d.a and not exceeding 36 kv

TS EN 1005-5 Safety of machinery-Physical performance of man-Part 5: Risk assessment for high frequency repetitive handling

TS EN 349 + A1Machine safety - Minimum clearances to protect human body parts against crushing

TS EN 574 + A1 Safety in machines - two-hand control devices - Functional features - Design principles

TS EN 1037 + A1 Safety in machines - Preventing unexpected operation

TS EN 61310-1 Safety on machines - Display, marking and actuating - Part 1: Rules for visible, audible and tactile signs

TS EN 61310-2 Safety on machines - Display, marking and actuating - Part 2: Marking-related features

TS EN 61310-3 Safety in machines - Display, marking and actuating - Part 3: Rules for the installation and operation of actuating mechanisms

TS EN ISO 13857 Safety in machines - Safety distances to prevent danger in areas where arms and legs can be reached

S EN 12198-3 + A1 Safety in machinery - Assessment and reduction of risks from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or shielding

TS EN 547-1 + A1 Safety in machinery - Human body measurements - Part 1: Principles for determining the dimensions of the openings required for the entire body to reach the machines

TS EN 547-2 + A1 Safety in machinery - Dimensions of the human body - Part 2: Principles for determining the required dimensions for access openings

TS EN 547-3 + A1 Safety in machinery - Human body measurements - Part 3: Anthropometric data

TS EN 614-2 + A1 Safety in machines - Principles of ergonomic design - Part 2: Interactions between machine design and work tasks

TS EN 842 + A1 Safety in machinery - Visual hazard signals - General specifications, design and test methods

TS EN 981 + A1 Safety in machinery - Audible and visual hazard systems and information signals

TS EN 12198-1 + A1 Safety in machinery - Assessment and reduction of the risk of radiation emitted by the machine - Part 1: General principles

TS EN 12198-2 + A1 Safety in machinery - Assessment and mitigation of risks caused by radiation emitted by machinery - Part 2: Measurement process of radiation emission

TS EN 547-1 + A1 Safety in machines - Human body measurements - Part 1: Principles for the determination of the required dimensions of the openings for the entire body to reach the machines

TS EN 614-2 + A1 Safety in machines - Principles of ergonomic design - Part 2: Interactions between machine design and work tasks

TS EN 12198-1 + A1 Safety in machines - Risk assessment and reduction of the radiation emitted by the machine part 1: General principles

TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery

TS EN 894-1 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive - Part 1: General principles for interaction between the display and control drive and human

TS EN 894-2 + A1 Safety in machinery - Ergonomic guidelines for the design of the displays and the control drive - Part 2: Displays

TS EN 894-3 + A1 Safety in machinery - Ergonomic requirements for the design of displays and control drives - Part 3: Control drives

TS EN 1005-2 + A1 Safety in machinery - Physical performance of man - Part 2: Manually operating the machine and its components

TS EN 1005-3 + A1 Safety in machinery - Physical performance of man - Part 3: Recommended force limits for machine operation

TS EN 1005-4 + A1 Safety in machinery - Physical performance of man - Part 4: Assessment of body postures and movements during operation according to the machine

TS EN 614-1 + A1 Safety in machines - Ergonomic design principles - chapter 1: Terminology and general principles

TS EN ISO 11161 / A1 Safety in machines - Integrated manufacturing systems - Basic rules

TS EN 894-4 Safety in machines - Ergonomic rules for the design of displays and control drives - Part 4: Arrangement and position of displays and control operators

TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances

TS EN 60204-11: 2000 / AC: 2010 Safety in machinery - Electrical equipment of machines - Part 11: Requirements for high-voltage equipment used in voltages above 1000 v aa or 1500 v d.a and for voltages not exceeding 36 kv

TS EN 349 + A1 Safety in machines - Minimum intervals to avoid the danger of crushing parts of the human body

TS EN 574 + A1 Safety in machines-Two-hand control devices-Functional features-Design principles

TS EN 1037 + A1 Safety on machines - Preventing unexpected operation

TS EN 13861 Safety in machinery - Guidance on the application of ergonomics standards in the design of machinery

TS EN 1760-2 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principle for the design and testing of pressure-sensitive edges and pressure-sensitive rods

TS EN ISO 13849-2 Safety in machines - Safety-related components of control systems - Part 2- Verification

TS EN 13861 Machine safety - Guidance on the application of ergonomic standards in machine design

TS EN 12786: Safety in 2013 machines - Guidance on the design of vibration-related substances of safety standards

TS EN 62061: 2005 / A1: 2013 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

TS EN ISO 13856-1: Safety in machines - Pressure-sensitive protective devices - Part 2013: General principles for the design and testing of pressure-sensitive substrates and pressure-sensitive soles

TS EN ISO 13856-2: Safety in 2013 Machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods

TS EN ISO 13849-2 Safety in machines - Safety-related parts of control systems - Part 2: Verification

TS EN 61511-2 Functional safety - Safety instrumented systems for the process industry - Part 2: Guidelines for the implementation of IEC 61511-1

TS EN ISO 13857 Safety in machines - Safety distances to prevent danger in areas where arms and legs are accessible

TS EN ISO 12100 Safety in machines - General principles for design - Risk assessment and mitigation (ISO 12100: 2010)

TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions

TS EN ISO 13856-3 Safety in machines - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive buffers, plates, wires and similar devices

TS EN ISO 14119 Safety on machines - Interlocking devices with guards - Principles for design and selection

TS EN 61496-2 Machine safety - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active optoelectronic protective elements (AOPDs)

TS EN 61496-1 Safety on machinery - Electrically sensitive protection equipment - Part 1: General rules and tests

TS EN 60204-31 Safety in machinery - Electrical equipment in machinery - Part 31: Special safety and EMC specifications for sewing machines, sewing units and systems

TS EN 61310-1 Safety in machines - Display, marking and actuating - Part 1: Rules for visible, audible and tactile signs

TS EN 61310-2 Safety on machines - Display, marking and actuating - Part 2: Marking-related features

TS EN 61310-3 Safety in machines - Display, marking and actuating - Part 3: Rules for the installation and operation of actuating mechanisms

TS EN 12786 Safety in machines - Requirements for the preparation of vibration-related substances of safety standards

TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery

tst ISO 13851 Two-hand control devices - - Machine Safety functional aspects and design principles

tst ISO 13854 Safety in Machines - Minimal gaps to prevent crushing of human body parts  

TS ISO 14118 Safety on Machines - Prevention of unexpected start-ups

TS EN ISO 14120 Safety in Machinery - Guards - General requirements for design and construction of fixed and movable guards

TS EN 614-1 + A1 Safety in machines - Ergonomic design principles - Part 1: Terminology and general principles

tst EN ISO 14119 Safety on machines - Interlocking devices with guards - Principles for design and selection

tst EN ISO 13856-1 Safety in machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive substrates and pressure-sensitive soles

tst EN ISO 13856-2 Safety in machines - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods

tst EN ISO 13856-3 Safety in machines - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive buffers, plates, wires and similar devices

tst EN ISO 13855 Safety in machines - Installation of protective equipment according to the approach speed of the body parts

TS EN 60825-1 Safety of laser products - Part 1: Hardware classification and rules

tst ISO / TR 14121-2 Safety on machines - Risk assessment - Part 2: Application guidance and examples of methods

TSE CEN GUIDE 414 Safety in machines - Rules for the preparation and presentation of safety standards

TSE CEN GUIDE 414 Safety in machines - Rules for the preparation and presentation of safety standards

TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances

tst EN 61496-1 Safety on machinery - Electrically sensitive protective equipment - part 1: General rules and tests  

tst EN 61496-2 Machine safety - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active optoelectronic protective elements (AOPDs) 

TS EN 60825-1 Safety of laser products - Part 1: Hardware classification and rules (IEC 60825-1: 2014)

TS EN 62061: 2005 / A2 Machine safety - Functional safety of safety-related electrical, electronic and programmable electronic control systems

TS EN 61285 Safety of industrial-process control-analysis enclosures

tst EN 61010-2-201 Safety regulations for measuring, checking and laboratory electrical equipment - Part 2-201: Particular requirements for control devices

TS EN ISO 19353 Safety in machinery - Fire prevention and fire protection

TS EN ISO 13850 Safety on machinery-Emergency stop equipment -Design principles

TS EN ISO 14123-1 Reducing health risks caused by harmful substances emitted by the machine - Machine Safety Section 1: Principles and specifications for machine manufacturers

TS EN ISO 13849-1 Safety in machines - Safety-related parts of control systems - Part 1: General principles for design

TS EN ISO 14123-2 2: Leading methodology verification procedures - Reducing health risks caused by harmful substances emitted by the machine - Safety Section

tst EN ISO 14120 Safety in machines - Guards - General requirements for design and construction of fixed and movable guards

tst EN ISO 19353 Safety in machinery - Fire prevention and fire protection

tst EN ISO 13849-1 Safety in machines - Safety-related parts of control systems - Part 1: General principles for design

tst EN ISO 13850 Safety in machines - Emergency stop equipment - Design principles

TS EN ISO 14123-1 Reducing health risks caused by harmful substances emitted by the machine - Machine Safety Section 1: Principles and specifications for machine manufacturers

TS EN ISO 14123-2 2: Leading methodology verification procedures - Reducing health risks caused by harmful substances emitted by the machine - Safety Section

TS EN 16710-2 Ergonomics methods - Part 2: A business analysis methodology for bearing design

TS EN ISO 14122-1 Safety in machines-Permanent means of access to machines-Part 1: Selection of fixed means of access between two levels

TS EN ISO 14122-2 Safety in machines-Permanent means of access to machines-Part 2: Work platforms and walkways

TS EN ISO 14122-3 Safety in machines-Permanent means of access to machines-Part 3: Normal ladders, step ladders and railings

TS EN ISO 14122-4 Safety in machinery - Permanent means of access to machinery section 4: Fixed ladders

tst EN 16710-2 Ergonomics methods - Part 2: A business analysis methodology for bearing design  

tst EN ISO 14122-1 Safety in machines-Permanent means of access to machines-Part 1: Selection of fixed means of access between two levels

TS EN ISO 14122-2 Safety in machines-Permanent means of access to machines-Part 2: Work platforms and walkways

TS EN ISO 14122-3 Safety in machines-Permanent means of access to machines-Part 3: Normal ladders, step ladders and railings

tst EN ISO 14122-4 Safety in machinery - Permanent means of access to machinery section 4: Fixed ladders

Industrial communication networks - Preferences - Part 61784-3: Functional safety fieldbuses - Cpf Additional features for 18 TS EN 1-3-18

TS EN 547-2 + A1 Safety in machinery-Human body measurements-Part 2: Rules for determining the required dimensions for access openings

TS EN 547-3 + A1 Safety in machines-Human body measurements - Anthropometric data

TS EN 894-1 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive section 1: General principles for interaction between the display and control drive and human

TS EN 894-3 + A1 Safety in machines - Ergonomic requirements for the design of the displays and control drives - Part 3: Control drives

tst EN 999 + A1 Safety in machines - Installation of protective equipment according to the approach speed of the body parts

TS EN 1005-2 + A1 Safety in machinery - Physical performance of man - Part 2: Manual handling and storage of machinery and machine components

TS EN 1005-3 + A1 Safety in machinery - Physical performance of man - Part 3: Recommended force limits when using machines

TS EN 1005-4 + A1 Safety in machinery - Physical performance of man - Part 4: Assessment of body postures and movements during operation according to the machine

TS EN 1005-5 Safety on machinery - Human physical performance - part 5: Risk assessment for high frequency repetitive handling and storage

TS EN 1760-3 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods

TS 2575 EN 60073 Coding principles for display devices and actuators - Human-machine interface, basic and safety principles for marking and identification

TS EN ISO 11161 Safety in machines - Integrated manufacturing systems - Basic rules

TS EN ISO 11553-1 Safety in machines - Laser machines - Part 1: General safety rules

TS EN ISO 11553-2 Safety in machines - Laser processing machines - Part 2: Safety requirements for hand-held laser processing machines

TS EN ISO 12100: Safety in 2010 machines - General principles for design - Risk assessment and risk reduction

TS EN 12198-3 + A1 Safety in machinery - Assessment and reduction of risks caused by radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

TS EN 12198-2 + A1 Safety in machinery - Assessment and mitigation of risks from radiation emitted by machinery - Part 2: Measurements of radiation propagation

TS EN ISO 13855 Safety in machines - Installation of protective equipment according to the approach speed of the body parts

TS EN 61482-1-1 Working under voltage-Protective clothing against electric arc thermal effects-Part 1-1: Test methods-Method 1: Determination of arc rated values ​​of flame resistance of materials for clothing (atpv or e <(index) bt50>)

TS EN 61511-1 Functional safety - Safety instrumented systems for the process industry - Part 1: Framework, recipes, system, hardware and software rules

TS EN 61800-5-2 Speed-adjustable electric power drive systems - Part 5-2: Safety rules -Functional

TS EN 62061 Machine safety - Functional safety of electrical, electronic and programmable electronic control systems for safety

TS EN 62061: 2005 / AC: 2010 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

TS EN 62439-1 Industrial communication networks - High availability automation network - Part 1: General concepts and calculation methods

TS EN 62439-2 Industrial communication networks - High availability automation network - Part 2: Media redundancy protocol (mrp)

TS EN ISO 14159 Safety in machinery - Hygiene requirements for the design of machinery