Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards.
TS EN 45510-4-1 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 1: Equipment for the reduction of dust emission
TS ISO 14164 Constant source emissions - Determination of volumetric flow rates of gas flows in ducts - Automatically
TS ISO 9096 Constant source emissions - Manual determination of the mass concentration of particulate matter
TS ISO 12141 Constant source emissions - Determination of the mass concentration of particulate matter (powder) at low concentrations - Manual gravimetric method
TS EN 13211 Air quality - Constant source emissions - Determination of total mercury concentration by manual method
TS EN 13284-1 Constant source emissions-Determination of low-range mass concentration of powder-Section 1: Manual gravimetric method
TS EN 1093-2 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 2: Measurement of emission rate for a given pollutant by tracer gas method
TS EN 1093-9 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 9: Pollutant concentration parameter, room method
TS EN 15267-3 Air quality - Certification of automatic measuring systems - Performance criteria and test procedures for automatic measuring systems used to monitor emissions
TS EN 1093-6 + A1 Safety in machines - Evaluation of the spread of harmful substances transportable by air - Part 6: Mass separation efficiency with grooved output
TS EN 1093-7 + A1 Safety in machinery - Emission assessment of airborne hazardous substances from machinery - Part 7: Mass separation efficiency - Ducted outlet
TS EN 1093-8 + A1 Safety in machinery - Emission assessment of dangerous substances carried by air from machinery - Part 8: Pollutant concentration parameter - Test table method
TS EN 1093-9 + A1 Safety in machinery - Emission assessment of airborne hazardous substances from machinery - Part 9: Pollutant concentration parameter - Room method
TS EN 1093-11 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 11: Pollutant removal index
TS EN 15267-3 Air quality - Certification of automatic measuring systems - Part 3: Performance criteria and test procedures for automatic measuring systems used to monitor constant source emissions
TS EN ISO 21258 Constant source emissions - Determination of mass concentration of dinitrogen monoxide (n2o) - Reference method: Non-dispersive infrared spectrometry method
TS EN 1911 Determination of the mass concentration of gaseous chlorides defined as constant source emissions - HCl - Standard reference method
TS EN ISO 25140 Constant source emissions - Automatic method for determination of methane concentration using flame ionization detector (FID)
TS EN 1093-2 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 2: Measurement of emission rate for a given pollutant by tracer gas method
TS EN 1093-3 + A1 Safety in machinery - Emission assessment of airborne hazardous substances section 3: Emission rate of a specified pollutant - Bench test method using actual pollutant
TS EN ISO 25139 Constant source emissions - Manual method for determination of methane concentration using gas chromatography
TS EN 13284-2 Constant source emissions - Determination of the low range mass concentration of powder - Part 2: Automatic measuring systems
tst ISO 10396 Constant source emissions - Sampling for automatic determination of gas concentrations
TS EN 50379-3 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances Part 3: Performance requirements for devices used in the illegal service of gas-fired heating appliances
TS EN 50379-2 Specification for portable electrical devices designed to measure the flue gas parameters of heating appliances section 2: Performance requirements for legal examinations and assessment devices
TS ISO 10396: 2007 Constant source emissions - Sampling for automatic determination of gas concentrations
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
TS EN ISO 13199 Constant source emissions-Determination of total volatile organic matter (TVOCs) from waste gases from non-combustion processes-Infra-red analyzer equipped with catalytic converter
TS EN ISO 16911-1 Constant welding emissions - Manual and automatic determination of speed and flow in ducts - Part 1: Manual reference method
TS EN ISO 16911-2 Constant welding emissions - Manual and automatic determination of speed and flow in ducts - Part 2: Automatic measuring systems
TS EN ISO 13833 Constant source emissions - Determination of carbon dioxide content of biolute (biogenic) and fossil - Radiocarbon sampling and determination
TS EN 12619 Constant source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous method using flame ionization detector
TS ISO 10155 / Cor 1: 2002 Constant source emissions - Determination of mass concentrations of particles - Automatic monitoring - Performance characteristics, test methods and properties
TS ISO 7934 / Amd 1: 1998 Constant source emissions-Determination of sulfur dioxide mass concentration-Hydrogen peroxide / barium perchlorate / thorin method
TS ISO 9096 / Cor 1: 2006 Constant source emissions - Manual determination of the mass concentration of particulate matter
tst EN 1948-4 + A1 Constant source emissions-Determination of mass concentrations of PCDD / PCDF and PCB-like dioxins-Part 5: Sampling and analysis of PCB-like dioxins
TSE CEN / TS 1948-5 Constant source emissions - Determination of the mass concentration of PCDDs / PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs / PCDFs and PCBs.
TS ISO 10155 / Cor.1 Constant source emissions - Determination of the mass concentration of particles - Automatic monitoring - Performance characteristics, test methods and properties TADİL 1
TS ISO 7934 / Amd 1 Constant source emissions - Determination of sulfur dioxide mass concentration - Hydrogen peroxide / barium perchlorate / thorin method MODIFICATION 1
TS ISO 9096 / Cor 1 Constant source emissions - Manual determination of the mass concentration of particulate matter
tst EN 14181 Constant welding emissions - Quality assurance of automatic measuring systems
TS EN 19694-1 Constant source emissions - Determination of greenhouse gas (SG) emissions in energy-intensive industries - Part 1: General dimensions
TS EN 19694-2 Constant source emissions - Determination of GHG emissions in energy-intensive industries - Part 2: Iron and steel industry
TS EN 19694-3 Constant source emissions - Determination of GHG emissions in energy-intensive industries - Part 3: Cement industry
TS EN 19694-4 Constant source emissions - Determination of greenhouse gas (SG) emissions in energy-intensive industries - Part 4: Aluminum industry
TS EN 19694-5 Constant source emissions - Determination of greenhouse gas (SG) emissions in energy-intensive industries - Part 5: Lime industry
TS EN 19694-6 Constant source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Iron industry
TS EN 50632-2-3 Electric motor powered tools - Dust metering - Part 2-3: Specific requirements for concrete grinders and disc type sanders
TS EN 50632-2-4 Electric motor driven tools - Dust measurement - Part 2-4: Specific requirements for non-disc type abrasives
TS EN 50632-2-5 Electric motor powered tools - Dust measurement process - Part 2-5: Specific requirements for circular saws
TS EN 50632-2-11 Electric motor powered tools - Dust measurement process - Part 2-11: Specific requirements for decoupage and sword saws
TS EN 50632-2-14 Electric motor powered tools - Dust measurement process - Part 2-14: Specific requirements for plans
TS EN 50632-2-17 Electric motor powered tools - Dust measurement process - Part 2-17: Specific requirements for hand mills and grinders
TS EN 50632-2-19 Electric motor powered tools - Dust measurement process - Part 2-19: Specific requirements for planer machines
TS EN 50632-3-1 Electric motor-powered tools - Dust measurement - Part 3-1: Particular requirements for portable table saws
TS EN 50632-3-9 Electric motor-powered tools - Dust measurement - Part 3-9: Specific requirements for portable miter saws
TS EN 50632-3-3 Electric motor-powered tools - Dust measurement - Part 3-3: Portable planers and thickeners
TS EN 14789 Constant source emissions - Determination of the volume concentration of oxygen - Standard reference method: Paramagneticity
TS EN 14790 Constant source emissions - Determination of water vapor in chimneys - Standard reference method
TS EN 14791 Constant source emissions - Determination of the mass concentration of sulfur oxides - Standard reference method
TS EN 14792 Constant source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
TS EN 14793 Constant source emissions - Demonstration of the equivalence of an alternative method to a reference method
TS EN 15058 Constant source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: Non-dispersive infrared spectrometry
TS EN 1093-4 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 4: Efficiency of holding an exhaust system - tracer method
TS EN 1093-3 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 3: Measurement of emission rate for a given pollutant by laboratory test method
TS EN 1093-6 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 6: Mass separation efficiency with duct-free outlet
TS EN 1093-8 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 8: Pollutant concentration parameter, test bench method
TS EN 1093-11 + A1 Safety in machinery - Assessment of emissions of dangerous substances carried by air - Part 11: Pollutant removal index
TS EN 1093-7 + A1 Safety in machinery - Evaluation of emissions of airborne hazardous substances - Part 7: Mass separation efficiency, ducted outlet
TS EN 1822-1 Air filters - High efficiency (epa, hepa and ulpa) - Part 1: Classification, performance test and marking rules
TS EN 1822-2 Air filters - High efficiency (epa, hepa and ulpa) - Part 2: Aerosol production, measuring equipment, particle counting statistics
TS EN 1822-3 Air filters - High efficiency (epa, hepa and ulpa) - Part 3: Test of flat plate filter screening
TS EN 1822-4 Air filters - High efficiency (epa, hepa and ulpa) - Part 4: Determination of the tightness of the filter element (screening method)
TS EN 1822-5 Air filters - High efficiency (epa, hepa and ulpa) - Part 5: Determination of the efficiency of the filter element
TS EN 1948-1 Constant source emissions- Determination of mass concentrations of Pcdds / pcdfs-Part 1: Sampling
TS EN 1948-2 Constant source emissions-Determination of mass concentrations of Pcdds / pcdfs-Part 2: Extraction and cleaning
TS EN 1948-3 Constant source emissions- Determination of mass concentrations of Pcdds / pcdfs-Part 3: Identification and quantitative determination
TS EN 1093-1 Safety in machinery - Emission assessment of airborne dangerous substances - Part 1: Selection of test methods
TS EN ISO 3211 Aluminum and aluminum alloys-Anodic oxide coating deterioration crack resistance
TS ISO 7934 Constant source emissions-Determination of sulfur dioxide mass concentration-Hydrogen peroxide / barium perchlorate / thorin method
TS ISO 7935 Spot source emissions - Determination of mass concentration of sulfur dioxide - Performance characteristics of automatic measurement methods
TS ISO 8178-3 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 3: Definitions and methods for measuring exhaust gas fumes in steady state
TS ISO 10155 Constant source emissions - Determination of mass concentrations of particles - Automatic monitoring - Performance characteristics, test methods and properties
TS ISO 10397 Constant source emissions - Determination of asbestos plant emissions - Fiber counting method
TS ISO 10780 Spot welding emissions - Measurement of velocity and flow of gas flows in pipes
TS ISO 10849 Constant source emissions - Determination of mass concentrations of nitrogen oxides - Performance characteristics of automatic measuring systems
TS ISO 11042-1 Gas turbines - Exhaust gas emissions - Part 1: Measurement and evaluation
TS ISO 11042-2 Gas turbines - Exhaust gas emissions - Part 2: Automatic monitoring of emissions
TS ISO 11564 Constant source emissions - Determination of mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
TS ISO 11632 Constant source emissions - Determination of sulfur dioxide mass concentration - Ion chromatographic method
TS ISO 12039 Constant source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automatic measuring systems
TS EN 12753 + A1 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety regulations
TS EN 13211 / AC Air quality - Constant source emissions - Determination of total mercury concentration by manual method
TS EN 13277-7 Protective equipment for martial arts - Part 7: Additional rules and test methods for hand and foot protectors
TS EN 13284-2 Constant source emissions - Determination of the low-range mass concentration of dust - Part 2: Automated measuring systems "
TS EN 14385 Constant source emissions - Determination of total emissions of as, cd, cr, co, cu, mn, ni, pb, ti and v
TS EN 14884 Air quality - Constant welding emissions - Determination of total mercury - Automatic measuring systems
TS EN 15259 Air quality - Measurement of constant source emissions - Requirements for measuring zones and locations, purpose, plan and reporting of measurement
TS EN 15445 Leakage and diffuse emissions, common concern of industrial sectors - Characterization of fugitive dust sources by reverse dispersion modeling
TS EN 15446 Leakage and widespread emissions, common concern of industrial sectors - Measurement of leakage water vapor emissions from equipment and pipe cracks
TS EN ISO 17652-4 Welding - Workshop test for welding and related processes - Part 4: Smoke and gas emission
TS EN ISO 23210 Constant source emissions - Determination of mass concentration of pm10 / pm2,5 in waste gases - Measurement of low concentrations with impactors
TS EN 45510-4-6 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 6: Equipment for the removal of flue gas from sulfur oxides (sox)
TS EN 45510-4-10 Power plants-Supply guide for equipment-Section 4-10: Boiler ancillary plants-Equipment for the removal of flue gas from nitrogen oxides