• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Workplace Air Standards

Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards. 

 

TS EN 689 Workplace air - Guidelines for the comparison of respiratory chemicals with limited values ​​and evaluation of the measurement strategy

TS EN 13098 Workplace air - Guide for airborne microorganisms and endotoxin measurements

TS EN ISO 10882-2 Health and safety in welding and related processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases

TS ISO 16200-1 Workplace air quality-Sampling from volatile organic compounds and analysis by solvent desorption / gas chromatography-Part 1: Pump sampling method

TS ISO 16200-2 Workplace air quality-Sampling from volatile organic compounds and analysis by solvent desorption / gas chromatography-Part 2: Diffusion sampling method

TS EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide during arc welding, cutting and gouging (NO) and nitrogen dioxide (NO2) emission rates determination

TS EN 1319 Air heaters-Gas burners-Forced convexion-Used for heating the space in the houses -Net heat load 70 can not exceed kw-Burner with ventilator

TS EN 1540 Workplace exposure - Terms and definitions

TS EN ISO 13137 Workplace air- Pumps for personal sampling of chemical and biological materials -Features and test methods

TS EN 15051-1 Workplace exposure - Measurement of dustiness of bulk material - Part 1: Requirements and selection of test methods

TS EN 15051-3 Workplace exposure - Measurement of dustiness of bulk material - Part 3: Continuous release method

TS EN 13936 Workplace exposure - Procedures for the measurement of chemicals present as a mixture of airborne particles and vapors - Requirements and test methods

tst EN 482 + A1 Workplace air - General rules for the performance of chemical processes  

tst EN 1076 Workplace air-Pumped sorbent tubes for the determination of gases and vapors-Features and test methods

tst EN 838 Workplace air- Diffusion sampling devices for the determination of gases and vapors- Properties and test methods  

TS EN 13205-1 Workplace exposure - Assessment of the sampler's performance for measuring airborne particle concentrations - Part 1: General requirements

TS EN 13205-2 Workplace exposure - Evaluation of the sampler's performance for measuring airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency

TS EN 13205-4 Workplace exposure - Evaluation of the sampler's performance to measure airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

TS EN 13205-5 Workplace exposure - Evaluation of the sampler's performance for measuring airborne particle concentrations - Part 5: Aeresol sampler performance test and comparison of the sampler in the workplace

TS EN 13205-6 Workplace exposure - Evaluation of the sampler's performance for measuring airborne particle concentrations - Part 6: Transport and handling tests

tst EN ISO 28439 Workplace air - Characteristics of ultra fine aerosol / non-aerosol - Determination of numerical concentration and particle distribution using differential electrical mobility analysis systems (ISO 28439: 2011)

tst EN 13936 Workplace exposure - Procedures for the measurement of chemicals present as a mixture of airborne particles and vapors - Requirements and test methods

tst EN ISO 13137 Workplace air- Pumps for personal sampling of chemical and biological materials -Features and test methods (ISO 13137: 2013)

TS EN 13890 Exposure to workplace air - Processes for the measurement of metals and semi-metals in airborne particles - Requirements and test methods

tst EN 14031 Workplace air - Determination of endotoxins in the air

tst EN 14042 Workplace air - Guidelines for the application and use procedure for the assessment of the effects of chemical and biological substances

tst EN 14530 Workplace air - Determination of diesel particles - General rules

EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide (CO2) during arc welding, cutting and gouging Determination of emission rates of (NO) and nitrogen dioxide (NO15011) (ISO 2-2009: XNUMX)

TS EN ISO 15011-4 / tst A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet (ISO 15011-4: 2006 / Amd 1: 2008)

tst CEN / TR 15230 Workplace air- Sampling guide for aerosol fractions that can be inhaled thoracic and lungs  

TS EN 13205-1 Workplace air exposure - Assessment of the performance of the sampling device for measuring airborne particle concentrations - Part 1: General requirements

TS EN 13205-2 Workplace air exposure - Evaluation of the sampling device performance for measuring airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency

TS EN 13205-4 Workplace air exposure - Evaluation of the sampling device performance for measuring airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

TS EN 13205-5 Workplace air exposure - Evaluation of the sampling device performance for measuring airborne particle concentrations - Part 5: Performance test of aerosol sampling device and comparison of the sampling device at the workplace

TS EN 13205-6 Workplace air exposure - Evaluation of the performance of the sampling device for measuring airborne particle concentrations - Part 6: Transport and handling tests

TS EN 45544-1 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 1: General rules and test methods

TS EN 45544-2 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 2: Performance requirements for devices used for exposure measurements

TS EN 45544-3 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 3: Performance requirements for devices for general gas detection

TS ISO 15202-1 Workplace air - Determination of metals and semi-metals in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling

TS ISO 15202-2 Workplace air - Determination of metals and semi-metals in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation

TS ISO 8672 Air quality - Determination of inorganic fiber concentration in air by phase contrast optical microscope - Membrane filter method

TS ISO 8761 / Cor 1: 2009 Workplace air - Determination of nitrogen dioxide mass concentration - Method of detector tubes for short-term sampling with direct indication

TS ISO 16107 Workplace air-performance evaluation protocol for diffusion sampling devices

TS ISO 16702 Workplace air - Determination of total isosionate groups in air using 2- (1-Methoxyphenyl) piperazine and liquid chromatography

TS ISO 8761 / Cor 1 Workplace air - Determination of nitrogen dioxide mass concentration - Method of detector tubes for short-term sampling with direct indication MODIFICATION 1

TS EN 482: 2012 + A1 General rules for the performance of processes related to the measurement of workplace air-chemicals

TS EN ISO 17621 Workplace atmosphere- Short-term measurement systems with detector tube-Features and test methods

TS EN 45544-4 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 4: Device selection, installation, operation and maintenance manual

TS EN 15051-2 + A1 Workplace exposure - Measurement of dust from bulk materials - Part 2: Rotary drum method

TS EN 481 Workplace atmosphere-Size fraction recipes for particle measurements in air

TS EN 1076 Workplace air-Pumped sorbent tubes for the determination of gases and vapors-Features and test methods

tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for analysis of smoke particles

TS ISO 8518 Workplace air - Determination of lead and lead compounds in particulates - Flame or electrothermal atomic absorption spectrometric method

TS ISO 8761 Workplace air - Determination of nitrogen dioxide mass concentration - Method of detector tubes for short-term sampling with direct indication

TS ISO 9486 Workplace air - Determination of chlorinated hydrocarbon vapors - Activated charcoal tube / solvent separation / gas chromatography method

TS ISO 9487 Workplace air-Determination of aromatic hydrocarbons in vapor form-Activated coal tube / solvent desorption / gas chromatographic method

TS EN 13890 Workplace air - Measurement processes of metals and metalloids in air - Properties and test methods

TS EN 14031 Workplace air - Determination of endotoxins in the air

TS EN 14530 Workplace air - Determination of diesel particulates - General rules

TS EN 14583 Workplace air - Volumetric bioaesol sampling devices - Rules and test methods

TS EN ISO 15011-4 / A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet

TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 3: Determination of ozone concentration using fixed point measurements during arc welding

TS EN ISO 16017-1 Internal ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Sampling by pump

TS EN ISO 28439: 2011 Workplace air - Characteristics of ultra fine aerosol / non-aerosol - Determination of numerical concentration and particle distribution using differential electrical mobility analysis systems