Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards.
TS ISO 6767 Ambient air - Determination of the mass concentration of sulfur dioxide - Tetrachloromercurate / pararosanil method
TS ISO 10313 Environmental air-Determination of ozone mass concentration-Chemiluminescence method
TS EN ISO 12894 Ergonomics of the thermal environment - Medical supervision of individual exposure to extremely hot or extremely cold environments
TS EN ISO 7726 Ergonomics of thermal media - Measuring instruments for physical quantities
TS EN ISO 10551 Ergonomics of thermal media - Evaluating the impact of thermal media using subjective decision measures
TS EN 13528-1 Ambient air quality - Diffusion sampling devices for the determination of gases and vapors - Requirements and test methods - Part 1: General requirements
TS ISO 6768 Determination of ambient air-mass concentration of nitrogen dioxide-Advanced griess-Saltzman method
TS ISO 10473 Ambient air-Measurement of the mass of particulate matter collected in a filter-Beta ray absorption method
TS ISO 15593 Tobacco smoke in the environment-Evaluation of the contribution of smoke to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and fluorescence method
TS EN 13528-1 Ambient air quality-Diffusive sampling devices for determination of gas and vapor concentrations-Features and test methods-Part 1: General specifications
TS EN ISO 16000-9-indoor air - Part 9: Determination of volatile organic compound emissions from building materials and furniture - Emission test chamber method
TS EN ISO 16000-10 Indoor air - Part 10: Determination of volatile organic compound emissions from building materials and furniture - Emission test cell method
TS EN ISO 16000-11-indoor air - Part 11: Determination of volatile organic compound emissions from building materials and furniture - Sampling, preservation of samples and preparation of test specimens
TS EN 1731 Personal eye protection - Mesh eye and face protection
TS EN 1731 Cage eye and face protection - for industrial and non-industrial use against mechanical hazards and / or heat
TS EN 15549 Air quality - Standard method for measuring the concentration of benzoapyrene in ambient air
TS EN ISO 16000-9 / AC Indoor air - Part 9: Determination of volatile organic compound emissions from construction materials and furnishing - Emission test chamber method
TS EN ISO 15549 Non-destructive testing - Eddy current inspection - General rules
TS EN 14211 Ambient air quality - Standard method for the determination of nitrogen dioxide and nitrogen monoxide concentrations by chemical chemiluminescence
TS EN 14212 Ambient air quality - Standard measurement method for determination of sulfur dioxide concentration by ultraviolet fluorescence
TS EN 14625 Ambient air quality - Standard method for the determination of carbon monoxide concentration by infrared spectroscopy without wavelength separation
TS EN 14626 Ambient air quality - Standard method for the determination of carbon monoxide concentration by infrared spectroscopy without wavelength separation
TS EN ISO 16000-26 Sampling strategy for indoor air-carbon dioxide (CO2)
TS EN ISO 29462 Field tests of general ventilation filtration devices and systems on site with removal efficiency and resistance to air flow of particle size
TS EN 16253 Air quality - Near-surface atmospheric measurements by differential optical absorption spectroscopy (DOAS) - Ambient air and diffuse emission measurements
TS EN 16339 Ambient air quality - Determination of nitrogen dioxide concentration by chemical diffusive sampling
TS 13142 Authorized services - Requirements for flue gas desulfurization (SOx) systems
TS EN 16402 Paints and varnishes - Evaluation of material release from coatings exposed to indoor air - Sampling, conditioning and testing
TSE CEN / TS 16516 Construction products - Assessment of the release of hazardous substances - Determination of indoor air emissions
TS EN 16413 Ambient air quality - Biomonitoring with lichens - Assessment of epiphytic lichen diversity
TS EN 16414 Ambient air quality - Bio-monitoring with algae - Accumulation of atmospheric pollutants from on-site algae collected for sample preparation
TS EN 14212 / AC Ambient air - Standard method for measuring sulfur dioxide concentration by ultraviolet fluorescence
TS EN 12341 Ambient air - Standard gravimetric measurement method for the determination of PM10 or PM2,5 mass concentrations of suspended particulate matter
TS EN ISO 16000-32 Indoor air - Part 32: Examination of buildings for the formation of pollutants
TS EN ISO 16000-19 Indoor air - Part 19: Sampling strategy for molds
tst EN 16253 Air quality - Near-surface atmospheric measurements by differential optical absorption spectroscopy (DOAS) - Ambient air and diffuse emission measurements
tst EN 15549 Air quality - standard method for measuring the concentration of benzoapyrene in ambient air
TS EN 14212 Ambient air - Standard method for measuring sulfur dioxide concentration by ultraviolet fluorescence
TS EN 14212 / AC Ambient air - Standard method for measuring sulfur dioxide concentration by ultraviolet fluorescence
TS EN 12341 Ambient air - Standard gravimetric measurement method for the determination of PM10 or PM2,5 mass concentrations of suspended particulate matter
tst EN 16413 Ambient air quality - Biological monitoring with lichens - Evaluation of epiphytic lichen diversity
tst EN 16414 Ambient air quality - Bio algae monitoring - Accumulation of atmospheric pollutants from on-site algae collected for sample preparation
TS EN ISO 16000-32 Indoor air - Part 32: Examination of buildings for the formation of pollutants (ISO 16000-32: 2014)
TSE CEN / TS 16637-1 Construction products - Assessment of hazardous substance release - Part 1: Guidance for surface extraction tests and determination of additional test steps
TSE CEN / TS 16637-2 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal dynamic surface extraction test
TS EN ISO 15549 Non-destructive testing - Eddy current inspection - General rules
TS ISO 10498 Environmental air - Determination of sulfur dioxide - Ultraviolet fluorescence method
TS ISO 13794 Ambient air - Determination of asbestos fibers - Indirect transmission transmission electron microscopy method
TS ISO 16000-3 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method
TSE CEN / TS 16868 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for allergy networks - Volumetric Hirst method
TS EN 14662-3 Ambient air quality - Standard method for measuring benzene concentrations - Part 3: Automatic pump sampling by in situ gas chromatography
TS EN 16738 Emission safety of flammable room perfumes - Test methods
TS EN 16739 Emission safety of flammable room perfumes - Recommended emission limits and methodology for the evaluation of test results
TS EN 16740 Emission safety of flammable room perfumes - User safety information
TSE CEN / TS 16637-3Building products - Evaluation of the release of dangerous goods - Part 2: Horizontal leach test
TS EN 16841-1 Ambient air - Determination of ambient air odor using field inspection - Part 1: Grid method
TS EN 16841-2 Ambient air - Determination of odor in ambient air using field inspection - Part 2: Smoke method
TSE CEN / TR 16998 Ambient air - Report on Nitro and oxy-PAHs - Origin, toxicity, concentrations and measurement methods
TSE CEN / TS 16115-2 Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of factory smoke measurements
TS EN 16846-1 Photocatalytic - Measurement of the efficiency of photocatalytic devices used for indoor VOC and odor removal in active mode - Part 1: Closed chamber batch test method
TSE ISO / TR 4227 Environmental air quality monitoring plan
TS ISO 8186 Environmental air- Determination of carbon monoxide mass concentration- Gas chromatographic method
TS ISO 9359 Air quality - Stratified sampling method for assessing ambient air quality
TS ISO 9835 Air quality - Ambient air - Determination of black smoke index
TS ISO 10312 Environmental air-Determination of asbestos fibers-Direct transfer transmission electron microscopy method
TS EN ISO 11399 Ergonomics of the thermal environment - Principles and applications of relevant standards
TS ISO 12884 Ambient air-Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons-Aggregation and gas chromatographic / mass spectrometric analysis on Sorbent-reinforced filters
TS EN 13528-2 Ambient air quality-Diffusive sampling devices for the determination of gas and vapor concentrations-Features and test methods-Part 1: Specific properties and test methods
TS EN 13528-3 Ambient air quality-Diffusive sampling devices for the determination of gas and vapor concentrations -Features and test methods-Section 3: Selection, operation and maintenance manual
TS ISO 13964 Air quality - Determination of ozone in ambient air - Ultraviolet photometric method
TS EN 14412 Water quality - Standard guide for the introduction, counting and interpretation of benthonic diatomic samples from rivers
TS EN 14625 Ambient air quality - Standard method for the determination of carbon monoxide concentration by infrared spectroscopy without wavelength separation
TS EN 14662-1 Ambient air quality - Standard method for the determination of benzene concentrations - Part 1: Pump sampling and subsequent thermal desorption and gas chromatography
TS EN 14662-4 Ambient air quality - Standard method for the determination of benzene concentrations - Part 4: Diffuse sampling and subsequent thermal desorption and gas chromatography
TS EN 14662-5 Ambient air quality - Standard method for the determination of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chomatography
TS EN 14662-2 Ambient air quality - Standard method for the determination of benzene concentrations - Part 2: Solvent desorption and gas chromatography following pump sampling
TS EN 14902 Ambient air quality - Standard method for measuring pb, cd, as and ni in suspended particles in pm10 fraction
TS EN 14902 / AC Ambient air quality - Standard method for measuring suspended particles in pb, cd, as and ni in pm10 fraction
TS ISO 14965 Air quality-Determination of total organic compounds except methane-Cryogenic concentration and direct flame ionization method
TS EN 15483 Ambient air quality - near-surface atmospheric measurements by FTIR spectroscopy
TS EN 15841 Ambient air quality - Standard method for the determination of arsenic, cadmium, lead and nickel in air
TS EN 15852: 2010 Environmental air quality - Standard method for the determination of total gas mercury
TS EN 15853: 2010 Ambient air quality - Standard method for the determination of total mercury deposition
TS EN ISO 16000-5-indoor air - Part 5: Sampling strategy of volatile organic compounds
TS EN ISO 16000-7 Indoor air - Part 7: Sampling strategy for the determination of asbestos fiber concentrations in air
TS EN ISO 16000-15 Indoor air - Part 15: Sampling strategy for nitrogen dioxide (no <(index) 2>)
TS EN ISO 16000-1 Indoor air - Part 1: General principles of sampling strategy
TS EN ISO 16000-2 Indoor air - Part 2: Sampling strategy for formaldehyde
TS EN ISO 16000-12 Indoor air - Part 12: Sampling strategies for polychlorinated biphenyls (pcbs), polychlorinated dibenzo-P-Dioxins (pcdds), polychlorinated dibenzofurans (pcdfs) and polycyclic aromatic hydrocarbons (pahs)
TS EN ISO 16017-1 Internal ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Sampling by pump