We provide testing, auditing and certification services to assist our company's customers with the necessary arrangements for testing and auditing.
TS ISO 8201 Acoustic-Audible emergency evacuation signal "
TS EN 381-1 Protective clothing - For users of the chain saw - Part 1: Test device for resistance to cut with chain saw
TS EN 381-1 Protective clothing - For users of the chain saw - Part 1: Test device for resistance to cut with chain saw
TS ISO 6107-8 Water quality - Terms - Section 8
TS ISO 10694 Soil quality - Determination of organic and total carbon after dry combustion (elemental analysis)
TS ISO 10694 Soil quality - Determination of organic and total carbon after dry combustion (elemental analysis)
TSE ISO / TR 11046 Soil quality - Determination of mineral oil - Infrared spectrometer and gas chromatography methods
TSE ISO / TR 11046 Soil quality - Determination of mineral oil - Infrared spectrometer and gas chromatography methods
TS EN 381-2 Protective clothing - For users of chain saws - Part 2: Test methods for leg guards
TS EN 381-5 Protective clothing - Part for chain saws Features for 5 leg guards
TS ISO 11265 Soil quality-Determination of electrical conductivity
TS ISO 11265 Soil quality-Determination of electrical conductivity
TS EN ISO 10707 (Formerly: TS ISO 10707) Water quality - Evaluation of the final air (aerobic) biodegradability of organic compounds in aqueous media - Determination of biochemical oxygen demand - Closed bottle test
TS EN ISO 10707 (Formerly: TS ISO 10707) Water quality - Evaluation of the final air (aerobic) biodegradability of organic compounds in aqueous media - Determination of biochemical oxygen demand - Closed bottle test
TS 3581 EN 26595 Water quality-Determination of total arsenic-Silver diethyldithiocarbamate spectrophotometric method
TS 3581 EN 26595 Water quality-Determination of total arsenic-Silver diethyldithiocarbamate spectrophotometric method
TS ISO 13536 Soil quality - cation exchange capacity and determination of exchangeable cations using buffered barium chloride solution in Ph 8,1
TS ISO 13536 Soil quality - cation exchange capacity and determination of exchangeable cations using buffered barium chloride solution in Ph 8,1
TS EN 718Elastic floor coverings-Determination of unit area mass of reinforcement or lining from polyvinyl chloride (pvc)
TS 4956 EN 25813 Water quality-Determination of dissolved oxygen-Iodometric method
TS 4956 EN 25813 Water quality-Determination of dissolved oxygen-Iodometric method
TS 6550 EN 903 Water quality-Determination of anionic surfactants by measuring the methylene blue index (mbas)
TS 6550 EN 903 Water quality-Determination of anionic surfactants by measuring the methylene blue index (mbas)
TS EN 138 Respiratory protection devices - Clean air breathing apparatus for full face masks, half face masks or mouth masks - Specification, tests and marking
TS EN 464Protective clothing - Test method for use against liquid and gas chemicals (including aerosols and solid particles) Determination of the liquid tightness of gas-tight clothing (internal pressure test)
TS 7526 EN 26777 Water quality-Nitrite determination-Molecular absorption spectrometric method
TS 7526 EN 26777 Water quality-Nitrite determination-Molecular absorption spectrometric method
TS ISO 6767 Ambient air - Determination of the mass concentration of sulfur dioxide - Tetrachloromercurate / pararosanil method
TS 9748 EN 27888 Water quality-Determination of electrical conductivity
TS 9748 EN 27888 Water quality-Determination of electrical conductivity
TS EN 269 Respiratory protective devices - Breathing apparatus used in conjunction with hood, powered (battery operated) and where fresh air is supplied by hose - Features, test, marking
TS ISO 11048 Soil quality - Determination of soluble sulphate in water and acid
TS ISO 11048 Soil quality - Determination of soluble sulphate in water and acid
TS ISO 11263 Soil quality-Phosphorus determination Spectrometric determination of soluble phosphorus in sodium hydrogen carbonate solution
TS ISO 11263 Soil quality-Phosphorus determination Spectrometric determination of soluble phosphorus in sodium hydrogen carbonate solution
TS ISO 11266 Soil quality-Guide to laboratory tests on the biological degradability of organic chemicals in soil under aerobic conditions
TS ISO 11266 Soil quality-Guide to laboratory tests on the biological degradability of organic chemicals in soil under aerobic conditions
TS ISO 8466-1 Water quality - Calibration, evaluation and estimation of performance characteristics of analytical methods - Part 1: Statistical evaluation of linear calibration function
TS ISO 5667-9 Water quality - Sampling - Section 9: Marine water sampling guide
TS 10308 ISO 11464Soil quality-Pretreatment of samples for physical chemical analysis
TS 10308 ISO 11464 Soil quality-Pretreatment of samples for physical chemical analysis
TS ISO 9855 Ambient air - Determination of lead in particulate aerosols held in filters - Atomic absorption spectrometric method
TS 8337 ISO 11261 Soil quality-Total nitrogen determination- Improved kjeldahl method
TS 8337 ISO 11261 Soil quality-Total nitrogen determination- Improved kjeldahl method
TS ISO 10313 Environmental air-Determination of ozone mass concentration-Chemiluminescence method
TS ISO 8756 Air quality - Temperature, pressure and humidity settings
TS EN ISO 4869-2 Acoustic-Ear protectors-Part 2: Determination of effective a-Weighted sound pressure levels when inserted into ear protectors
TS EN 348Protection-Test method; Determination of material behavior against splashing of molten metal parts
TS EN 364Personal protective equipment against fall-test methods
TS EN 381-3 Protective clothing for chain saws - Part 3: Test methods for protective boots
TS EN 863Protective clothing - Mechanical properties - Tensile strength test
TS 7924 EN 25663 Water quality-Determination of Kjeldahl nitrogen-After decomposition with selenium
TS 7924 EN 25663 Water quality-Determination of Kjeldahl nitrogen-After decomposition with selenium
TS prEN 894-3 Safety in machines - Ergonomic rules for the design of the displays and the control drive section 3: Control drive
TS EN 29241-2 Ergonomic features for office work with visual display terminals (vdt) section 2: Guidance on task characteristics
TS EN 475 Medical devices - Electrical alarm signals
TS EN 61219 Stressed operation - Earthing or earthing and shorting equipment using earthing rods as short-circuit device
TS EN 689 Workplace air - Guidelines for the comparison of respiratory chemicals with limited values and evaluation of the measurement strategy
TS 8020 EN 26461-2Water quality-Sulfite reducing airless environment (anaerobe) bacteria (clostridia) spores search and count section 2: Membrane filtration method
TS EN 2310 Aerospace series - Test methods for determination of flame resistance of non-metallic materials
TS EN 60984 couplings - insulating material - for stressed work
TS EN 1868 Fall protection personnel - List of equivalent terms
TS EN 61008-2-1 Residual current circuit breakers -Inseparable integral overcurrent protection -Used in homes and similar places (rccb) 2.1: Applicability of general rules to rccbs independent of line voltage
TS EN 54-2Fire detection and fire alarm systems section 2: Control and display equipment
TS EN 1891 Personnel protection against falling from height - Low-elongated, fluffy fiber ropes
TS EN 1891 Personnel protection against falling from height - Low-elongated, fluffy fiber ropes
TS EN 12083 Protective breathing apparatus - Breathing techniques with hose (non-masked filters) - Dust filters, gas filters and combined filters - Features, tests and marking
TS EN 12942 Respiratory protection devices - Power assisted filter devices with full face masks, half masks or quarter masks - Specification, test and marking
TS EN 61566 Measurements exposed to radio frequency electromagnetic fields-Field intensities within the frequency range 100 khz to 1 ghz
TS EN 61300-2-36 Fiber optic interconnection devices and passive components-Basic test and measurement procedures-Part 2-36: Tests-Flammability (fire hazard)
TS EN ISO 9241-7 Ergonomic dimensions for office work with image terminals (vdts) - Part 7: Measures against image reflection
TS EN ISO 9241-8 Ergonomic dimensions for office work with display terminals (vdts) - Part 8: Coloring requirements
TS EN ISO 389-2 Acoustic - Reference zero for calibration of audiometry-related equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and earplugs
TS EN 45510-4-1 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 1: Equipment for the reduction of dust emission
TS EN 50286 Protective clothing providing electrical insulation for low voltage installations
TS EN 50286 Protective clothing providing electrical insulation for low voltage installations
TS EN 50321 Electrically insulated shoes for working in low voltage installations
TS EN 50321 Electrically insulated shoes for working in low voltage installations
TS EN 1834-1 Internal combustion engines reciprocating - Safety regulations for the design and construction of engines used in potentially explosive atmospheres - Part 1: Used in flammable gas and vapor environments II. group motors
TS EN 1834-2 Internal combustion engines reciprocating - Safety regulations for the design and construction of engines used in potentially explosive atmospheres - Part 2: Used in underground work sensitive to grizu and / or flammable dust. group motors
TS EN ISO 10093 Plastics - Fire tests - Standard ignition sources
TS EN ISO 13997 Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects
TS EN ISO 14402 water quality - Determination of phenol index by flow analysis (fia and fa)
TS EN ISO 7822 Textile - Glass reinforced plastics - Cavity content, glow loss, determination of mechanical dispersion and statistical counting methods
TS EN ISO 9241-14 Ergonomic features for office work with visual display terminals (vdt) - Part 14: Menu dialogs
TS EN ISO 9241-6 Ergonomic requirements for oifs work with video display terminals - Part 6: Operating environment guide
TS 6020 EN ISO 7346-1 Water quality - Determination of the immediate lethal toxicity (toxicity) of substances on freshwater fish [Brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 1: Static method
TS 6020 EN ISO 7346-1 Water quality - Determination of the immediate lethal toxicity (toxicity) of substances on freshwater fish [Brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 1: Static method
TS EN 144-2 Protective breathing apparatus - Gas cylinder valves - Part 2: Output connections
TS 6021 EN ISO 7346-2 Water quality - Determination of acute lethal toxicity of substances on a freshwater fish [brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 2: Semi-static method
TS 6021 EN ISO 7346-2 Water quality - Determination of acute lethal toxicity of substances on a freshwater fish [brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 2: Semi-static method
TS EN 144-2 Protective breathing apparatus - Gas cylinder valves - Part 2: Output connections
TS 6021 EN ISO 7346-2 Water quality - Determination of acute lethal toxicity of substances on a freshwater fish [brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 2: Semi-static method
TS 6021 EN ISO 7346-2 Water quality - Determination of acute lethal toxicity of substances on a freshwater fish [brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 2: Semi-static method
TS EN 12763 Pipes and fittings - Manufactured with fiber cement - Used in building discharge systems - Dimensions and technical terms used in shipment
TS EN 13087-1: 2000 + A1: 2001 Protective helmets - Test methods - Part 1: Terms and conditions
TS EN 13098 Workplace air - Guide for airborne microorganisms and endotoxin measurements
TS EN 13342 Properties of sludges, determination of kjeldahl nitrogen
TS EN 13346 Properties of sludges-Determination of trace elements and phosphorus-Extraction methods in King's water
TS EN ISO 10882-2 Health and safety in welding and related processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
TS EN 13098 Workplace air - Guide for airborne microorganisms and endotoxin measurements
TS EN 13342 Properties of sludges, determination of kjeldahl nitrogen
TS EN 13346 Properties of sludges-Determination of trace elements and phosphorus-Extraction methods in King's water
TS EN ISO 10882-2 Health and safety in welding and related processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
Soil quality - Determination of soil microbial biomass - Part 14240: Rapidly accelerated respiration method with the substrate TS EN ISO 1-14240
TS EN 132 Respiratory protection devices - Terms, descriptions and pictograms
TS EN 134 Respiratory protection devices - Nomenclature of components
TS ISO 14164 Constant source emissions - Determination of volumetric flow rates of gas flows in ducts - Automatically
TS 4957-2 EN 1899-2Su quality - Determination of biochemical oxygen demand (boin) after day N - Part 2: Method for undiluted samples
TS 4957-2 EN 1899-2Su quality - Determination of biochemical oxygen demand (boin) after day N - Part 2: Method for undiluted samples
TS EN ISO 7899-1 Water quality - Detection and enumeration of intestinal enterococci in surface and waste waters - Part 1: Shortened method by inoculation into liquid media (most probable number)
TS EN 12259-1 + A1Fixed fire extinguishing systems - Sprinklers and water spray elements - Part 1: Sprinkler
TS EN 12259-2 Fixed fire extinguishing systems - Sprinklers and water spray elements - Part 2: Wet type alarm valve fittings
TS EN 12259-3 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 3: Dry-type alarm valve fittings
TS EN ISO 9241-7 Ergonomic features of office work with visual display terminals (vdt) - Part 7: Reflective display features
TS EN ISO 9241-9 Ergonomic features for office work with visual display terminals (VDT) - Part 9: Features for input devices without keyboards
TS EN 1825-1 Grease separators-Part 1: Design, performance and test principles, marking and quality control
TS EN ISO 17495 Water quality - Determination of selected nitrophenols - Mass spectrometric determination gas chromatography and solid-phase extraction method
TS EN 60335-2-96 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-96: Particular requirements for flexible sheet-shaped heating elements for room heating
TS EN 381-7 Protective clothing - For users of chain saws - Part 7: Rules for chain saw protective gloves
TS EN 381-4 Protective clothing - For users of chain saws - part 4: Test methods for chain saw protective gloves
TS EN ISO 13995 Protective clothing - Mechanical properties - Test method for determining the resistance of materials to puncture and dynamic tear
TS EN 13087-8 Protective helmets - Test methods - Part 8: Electrical properties.
TS EN ISO 10093 Plastics - Fire tests - Standard ignition sources
TS ISO 4736 Fire tests - Small chimneys - Test at elevated temperatures
TS ISO 5657 Fire reaction tests-Determination of flammability in construction products using radiant heat source
TS ISO 5658-4 Fire reaction tests - Flame spread - Part 4: Medium-scale test for vertical spread of flame from a vertically oriented sample
TS ISO 10840 Plastics - Application guide for standard fire tests
TSE ISO / TR 13387-3 Fire safety engineering - Part 3: Evaluation and verification of mathematical fire models
TSE ISO / TR 13387-4 Fire safety engineering - Part 4: Starting and spreading of fire and generation of fire waste
TSE ISO / TR 13387-5 Fire safety engineering - Part 5: Movement of fire waste
TSE ISO / TR 13387-6 Fire safety engineering - Part 6: Structural response and spread of fire from the enclosed space
TSE ISO / TR 13387-7 Fire safety engineering - Part 7: detection, action and response
TSE ISO / TR 13387-8 Fire safety engineering - Part 8: Life safety - behavior, location and situation of people using the building
TSE ISO / TR 5924 Fire tests - Fire response - Smoke from building products (two-chamber box test)
TSE ISO / TR 9122-5 Toxicity test of fire products - part 5: Estimation of toxicity effects of fire products
TSE ISO / TR 9122-5 Toxicity test of fire products - part 5: Estimation of toxicity effects of fire products
TS ISO 14520-2 Gas extinguishing systems - Physical properties and system design - Part 2: Cf3i extinguishing media
TS ISO 14520-4 Gas extinguishing systems - physical properties and system design - Part 4: Fc-3-1-10 fire extinguishing agent
TS ISO 14520-11 Gas extinguishing systems - Physical properties and system design section 11: Hfc 236fa fire extinguishing agent
TS EN ISO 14020 Environmental labels and declarations - General principles
TS EN 13274-4 Respiratory protective devices - Test methods - Part 4: Flame tests
TS EN 13274-4 Respiratory protective devices - Test methods - Part 4: Flame tests
TS EN 13274-2 Respiratory protective devices - Test methods - Part 2: Performance tests on application
TS EN 381-8 Protective clothing - For users of chain saws - Part 8: Chain saw protective gaiters - Test methods
TS EN 381-9 Protective clothing - For chain saw users - Part 9: Chain saw protective gaiters - Specifications
TS EN ISO 3822-4 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 4: Installation and operating conditions for special devices
TS EN ISO 14024 Environmental labels and declarations - Type 1: Environmental labeling - Principles and methods
TS EN ISO 11064-1 Ergonomic design of control centers - Part 1: Control center design principles
TS EN ISO 11064-2 Ergonomic design of control centers - Part 2: Control room arrangement principles
TS EN ISO 11399 Ergonomics of thermal media - Principles and application of relevant international standards
TS EN ISO 12894 Ergonomics of the thermal environment - Medical supervision of individual exposure to extremely hot or extremely cold environments
TS EN ISO 12894 Ergonomics of the thermal environment - Medical supervision of individual exposure to extremely hot or extremely cold environments
TS EN ISO 5349-2 Mechanical vibration - Measurement and evaluation of hand-held vibration of persons - Part 2: Practical guide for measuring at work
TS EN ISO 7726 Ergonomics of thermal media - Measuring instruments for physical quantities
TS EN 12094-7 Stationary fire extinguishing systems - Components of gas extinguishing systems - Part 7: Specification and test methods for sprayers in CO2 systems
TS EN 12094-7 Stationary fire extinguishing systems - Components of gas extinguishing systems - Part 7: Specification and test methods for sprayers in CO2 systems
TS EN 12255-10 Wastewater treatment plants - Part 10: Safety principles
TS EN 12255-8 Wastewater treatment plants - Part 8: Sludge treatment and storage
TS EN 13311-2 Biotechnology - Performance criteria for containers - Part 2: Pressure protection devices
TS EN ISO 13995 Protective clothing - Mechanical properties
TS EN ISO 15540 Ships and marine technology - Hose reinforcement fire resistance - Test methods
TS EN ISO 15541 Ships and marine technology - Hose reinforcement fire resistance - Test bench features
TS EN 50133-2-1 Alarm systems- Environmental control systems for security applications- Part 2-1: General specifications for parts
TS EN 60204-11 Safety on machines - Electrical equipment of machines - Part 11: Requirements for high-voltage equipment used for voltages above 1000 v aa or 1500 v d.a and not exceeding 36 kv
TS EN ISO 10551 Ergonomics of thermal media - Evaluating the impact of thermal media using subjective decision measures
TS EN ISO 10551 Ergonomics of thermal media - Evaluating the impact of thermal media using subjective decision measures
TS EN 61243-5 Working under voltage- Voltage detectors- Part 5: Voltage determination systems
TS EN 61479 Working under stress - Bending of insulating materials with flexible conductor
TS EN 61481 Operating under voltage - Portable phase comparators for alternating current voltages from 1 kv to 36 kv
TS EN 54-11 Fire detection and fire alarm systems - Part 11: Manually operated alarm devices
TS EN 167 Personal eye protection - Optical test methods
TS EN 12255-4 Wastewater treatment plants - Part 4: Primary sedimentation
TS EN 12255-7 Wastewater treatment plants - Part 7: Biological stationary film reactors
TS EN 12255-8 Wastewater treatment plants - Part 8: Sludge treatment and storage
TS EN 12255-4 Wastewater treatment plants - Part 4: Primary sedimentation
TS EN 12255-7 Wastewater treatment plants - Part 7: Biological stationary film reactors
TS EN 12255-8 Wastewater treatment plants - Part 8: Sludge treatment and storage
TS EN 858-1 Separating systems oil and light liquids such as oil-Part 1: Principles of product design, performance and testing, marking and quality control
TS EN 943-2 Protective clothing against liquid and gaseous chemicals containing liquid aerosol and solid particles - Part 2: Chemical protective clothing for emergency response teams Performance requirements for "gas-protected"
TS EN 1073-2 Protective clothing against radioactive contamination-Part 2: Requirements and test methods for non-ventilated protective clothing against separation of radioactive contamination
TS EN 1073-2 Protective clothing against radioactive contamination-Part 2: Requirements and test methods for non-ventilated protective clothing against separation of radioactive contamination
TS EN 1825-2 Grease separators - Part 2: Selection, installation, operation and maintenance of nominal size
TS EN 13052-1 Effect of substances on drinking water-Organic substances-Determination of color and turbidity of water in pipelines-Part 1: Test method
TS EN 13595-1 Protective clothing for professional motorcycle riders - Jackets, pants, one-piece or split suits - Part 1: General rules
TS EN 13595-3 Protective clothing for professional motorcycle riders - Jackets, pants, one-piece or split suits - Part 4: Test method for the determination of impact cutting resistance
TS EN 13595-4 Protective clothing for professional motorcycle riders - Jackets, pants, one-piece or split suits - Part 4: Test method for the determination of impact cutting resistance
TS EN 61249-2-18 Materials for printed plates and other interconnection structures - Part 2-4: Reinforced base material - Coated and uncoated - Reinforced copper-coated non-woven fiberglass reinforced sheet (vertical combustion test) (ic 61249-2) -18: 2001) 11.11.2002
TS EN 61249-2-4 Materials for printed plates and other interconnection structures - Part 2-4: Reinforced base material - Coated and uncoated - Flammable copper-coated polyester textured / nonwoven fibercam laminated sheet (vertical combustion test) (ic 61249- 2-4: 2001) 11.11.200213.220.40TS EN 13274-3 Respiratory protective devices - Test methods - Part 3: Determination of respiratory resistance
TS EN 13274-6 Respiratory protective devices - Test methods - Part 6: Determination of carbon dioxide content in inhaled air
TS EN 13648-2 Cryogenic containers - Safety devices for protection against overpressure - Part 2: Blasting disc safety devices for cryogenic containers
TS EN 13277-5 Protective equipment for martial arts - Part 5: Additional rules and test methods for genital and abdominal protectors
TS EN 61478 Working under tension - Ladders with insulating material
TS EN ISO 13731 Ergonomics-Thermal environment-Terms and symbols
TS EN 12255-4 Wastewater treatment plants - Part 4: Primary sedimentation
TS EN 12255-1 Wastewater treatment plants - Part 1: General construction principles
TS EN 12255-6 Wastewater treatment plants - Part 6: Activated sludge treatment
TS EN 50274 Low-voltage switching and control equipment - Protection against unintentional direct contact to hazardous voltage sections
TS EN 12255-7 Wastewater treatment plants - Part 7: Biological stationary - Film reactors
TS EN 12255-9 Wastewater treatment plants - Part 9: Odor control and ventilation
TS EN ISO 14956 Air quality - Evaluation of the suitability of a measurement method by comparing it to a specified measurement uncertainty
TS EN ISO 15587-1 Water quality-Fragmentation for the determination of selected elements in water-Part 1: Fragmentation in king water
TS EN ISO 15587-2 Water quality-Disintegration for determination of selected elements in water-Part 2: Nitrite acid disintegration
TS EN 50385 Product standard for demonstrating the compatibility of radio base stations and fixed terminal stations for radio communication systems with reference levels or basic restrictions on the general exposure of the public to radio frequency electromagnetic fields (110 mhz-40ghz)
TS 8088 ISO 996 Water quality - Selenium determination - atomic absorption spectrometric method (hydride technique)
TS ISO 9096 Constant source emissions - Manual determination of the mass concentration of particulate matter
TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3: 2009)
TS EN 13528-1 Ambient air quality - Diffusion sampling devices for the determination of gases and vapors - Requirements and test methods - Part 1: General requirements
TS EN ISO 14956 Air quality - Evaluation of the suitability of a measurement operation against the required measurement uncertainty
TS EN 858-2 Separation systems for light liquids (such as oil and petroleum) - Part 2: Selection of nominal size, installation, operation and maintenance of the system
TSE ISO / TR 14062 Environmental management - Including environmental aspects in product design and development
TS ISO 12141 Constant source emissions - Determination of the mass concentration of particulate matter (powder) at low concentrations - Manual gravimetric method
TS EN ISO 15587-2 Water quality - Disintegration for determination of selected elements in water - Part 2: Nitric acid disintegration
TS EN ISO 15587-1 Water quality - Degradation for the determination of selected elements in water - part 1: Degradation in king water
TS ISO 14869-2 Soil quality - Dissolution for determination of total element content - Part 2 - Dissolution by alkali melting
TS 5560 EN 166 Personal eye protection - Features
TS EN 169 Personal eye protection - Filters for welding and related techniques - Permeability characteristics and recommended use
TS EN 170Personal eye protection - Ultraviolet filters - Permeability properties and recommended use
TS 8435 EN 171 Personal eye protection - Infrared filters - Permeability characteristics and recommended use
TS EN 360Personal protective equipment - Anti-fall - Anti-fall type anti-fall
TS EN 142Breathing protection devices - Mouthpieces - Rules, tests, marking
TS EN ISO 14915-1 Software ergonomics for multimedia user interfaces - part 1: Design principles and general framework
TS EN ISO 14915-3 Software ergonomics for multimedia user interfaces - Part 3: Media selection and combination
TS EN 13274-8 Respiratory protective devices - Test methods - part 8: Clogging test with dolomite dust
TS EN 13949 Respiratory equipment - Self-contained open-circuit plunger for use with pressurized nitrox and oxygen - Features, tests, marking
TS ISO 13785-1 Fire reaction tests for building façades and additional coatings - Part 1: Medium-scale test
TS ISO 13785-2 Fire reaction tests for building façades and additional coatings - Part 2: Large-scale test
TSE ISO / TR 14696 Fire reaction tests - Determination of fire parameters of materials, products and combined materials by medium-scale heat emission calorimetry (ical)
TS EN ISO 14557 Fire fighting hoses - Rubber and plastic suction hoses and hose assemblies
TS EN 61219 Working under voltage - Grounding or earthing and short-circuit equipment using cues as a short-circuit arrangement - Voluntary grounding
TS ISO 13784-2 Sandwich panel construction systems - Fire reaction tests - Part 2: Test method for large rooms
TS EN ISO 14015 (Formerly: TS ISO 14015) Environmental management - Environmental assessment of organizations and residential areas
TS EN 136 Respiratory protective devices -Full face masks -Features, experiments, marking
TS EN 140 Respiratory protective devices - Half masks and quarter masks - Features, tests, marking
TS EN 50286 Protective clothing providing electrical insulation for low voltage installations
TS EN 50286 Protective clothing providing electrical insulation for low voltage installations
TS EN 13211 Air quality - Constant source emissions - Determination of total mercury concentration by manual method
TS EN 148-1 Respiratory protection devices - Thread for face protection parts - Part 1: Standard thread connection
TS EN 148-3 Respiratory protection devices - Thread for face protection parts - Part 3: M 45x3 screw connection
TS 12089 EN 13137 Properties of wastes-Determination of total organic carbon (full) in waste, sludge and sediments
TS 12089 EN 13137 Properties of wastes-Determination of total organic carbon (full) in waste, sludge and sediments
TS EN 13284-1 Constant source emissions-Determination of low-range mass concentration of powder-Section 1: Manual gravimetric method
TS ISO 16200-1 Workplace air quality-Sampling from volatile organic compounds and analysis by solvent desorption / gas chromatography-Part 1: Pump sampling method
TS ISO 16200-2 Workplace air quality-Sampling from volatile organic compounds and analysis by solvent desorption / gas chromatography-Part 2: Diffusion sampling method
TS ISO 6768 Determination of ambient air-mass concentration of nitrogen dioxide-Advanced griess-Saltzman method
TS ISO 10473 Ambient air-Measurement of the mass of particulate matter collected in a filter-Beta ray absorption method
TS ISO 15593 Tobacco smoke in the environment-Evaluation of the contribution of smoke to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and fluorescence method
TSE ISO / TR 7248 Fire data-Collection and reporting system
TS EN ISO 14254 (Formerly: TS ISO 14254) Soil quality-Determination of exchangeable acidity in barium chloride extracts
TS EN 1624 Textile and textile products - Combustion behavior of industrial and technical textiles - Determination of flame spread in vertically placed test pieces
TS ISO 13774 Rubber and plastic hoses for internal combustion engine fuels - Flammability test
TS EN 54-7Fire detection and alarm systems - Part 7: Smoke detectors - Spot detectors operating by scattered light, passing light or ionization
TS EN 50274 Low-voltage switching and control units - protection against electric shock - Protection against unintentional direct contact to hazardous voltage parts
TS EN 12259-5 Fixed fire extinguishing systems - Components for sprinklers and water spray systems - Part 5: Water flow detectors
TS EN 13821 Potentially explosive atmospheres - Explosion prevention and protection - Determination of the lowest ignition energy of dust / air mixtures
TS 2005 EN 60335-2-9 Safety regulations - For household and similar electrical appliances - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
TS 2212 EN 60335-2-21 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS 374 EN 60335-2-23 Safety rules - For household and similar electrical appliances - Part 2 - 23: Particular requirements for skin or hair care devices
TS 3033 EN 60529 / T1 Protection degrees provided by enclosures IP code) (electrical equipment) modified 1
TS EN 50384 Product standard (110 mhz-40 ghz) for indicating the compliance of fixed end stations and radio stations for wireless telecommunication systems with reference to basic levels of radio frequency electromagnetic fields or for basic restrictions
TS EN 12255-11 Wastewater treatment plants - Part 11: General data rules
TS EN ISO 14915-2 Software ergonomics for multimedia user interfaces - part 2: Multimedia roaming and control
TS EN 81-28 Elevators- Safety rules for construction and assembly-Elevators for human and freight transport section Alarms on 28 human and freight elevators
TS EN 352-5 Hearing protectors - Safety rules and tests - Part 5 - Active noise reduction earplugs
TS EN 352-6 Hearing protectors - Safety rules and tests - Part 6: Headphones with electrical audio input
TS EN 352-7 Hearing protectors - Safety rules and tests - Part 7: Level dependent headphones
TS EN 381-10 Protective clothing - For users of chain saws - Part 10: Test method for upper body protectors
TS EN 381-11 Protective clothing - For users of chain saws - Part 11: Rules for body protectors
TS EN 858-2 Separating systems for light liquids such as oil and petroleum - Part 2: Selection of nominal size, construction, operation and maintenance
TS EN 1991-1-2 European rule 1 - Principles of design and impact of structures - Part 2-2: Building effects - Effects on structures exposed to construction
TS EN ISO 4126-2 Safety devices for overpressure protection section 2: Blasting disc safety devices
TS EN ISO 6529 Protective clothing - Protection against chemical substances - Determination of resistance of liquid and gas penetration of protective clothing materials
TS EN ISO 6942 Protective clothing - Protection against heat and fire - Test method: Evaluation of material and material sets when exposed to heat sources emitted by radiation
TS EN 12729 Preventing contamination by recoil of drinking water - Type B-Type A
TS EN ISO 15913 Water quality - Determination of bentazone, hydroxy benzonitrile and some phenoxy alkanoic herbicides by solid phase extraction and derivatization by gas chromatography
TS EN 12094-1 Fixed fire extinguishing systems - Components for gas extinguishing systems - Part 16: Specification and test methods for scenting devices of low pressure co2 systems
TS EN 12094-2 Fixed fire extinguishing systems - Components for gas extinguishing systems - Part 2: Specification and test methods for non-electrically operated automatic control and delay devices
TS EN 12094-3 Stationary fire extinguishing systems - Components for gas extinguishing systems - Part 3: Specification and test methods for hand-held and stop devices
TS EN 12094-9 Fixed fire extinguishing systems - Components for gas extinguishing systems - Part 9: Specification and test methods for special fire detectors
TS EN 12094-10 Fixed fire extinguishing systems - Components for gas extinguishing systems - Part 10: Specification and test methods for pressure gauges and pressure regulating mechanisms
TS EN 12094-11 Stationary fire extinguishing systems - Components for gas extinguishing systems - Part 11: Components for mechanical weighing devices - Part 11: Specifications and test methods for mechanical weighing devices
TS EN 12094-12 Stationary fire extinguishing systems - Components for gas extinguishing systems - Part 12: Specification and test methods for pneumatic alarm devices
TS EN 12255-13 Wastewater treatment plants - Part 13: Wastewater treatment by sedimentation / flocculation
TS EN 12259-5 Stationary fire extinguishing systems-For sprinklers and water spray systems-Part 5: Water flow detectors
TS EN 12457-1 Characterization of wastes - Solid extraction analysis - Suitability test for solid extraction of granular solid wastes and sludges - Part 1: Single for high solids content with a particle size of 2 l / kg and particle size less than 4 mm graded party experiment
TS EN 12457-1 Characterization of wastes - Solid extraction analysis - Suitability test for solid extraction of granular solid wastes and sludges - Part 1: Single for high solids content with a particle size of 2 l / kg and particle size less than 4 mm graded party experiment
TS EN 12457-4 Characterization of wastes - Solid extraction analysis - Compatibility test for solid extraction of granular solid wastes and sludges - Part 4: For materials with a liquid solids content of 10 l / kg and particle size less than or equal to 10 mm one-stage batch experiment
TS EN 12457-4 Characterization of wastes - Solid extraction analysis - Compatibility test for solid extraction of granular solid wastes and sludges - Part 4: For materials with a liquid solids content of 10 l / kg and particle size less than or equal to 10 mm one-stage batch experiment
TS EN 13274-8 Respiratory protective devices - Test methods - Part 8: Determination of clogging with dolomite dust
TS EN 13308 Tanks - For transporting dangerous goods - Service equipment for tanks - Regulating valve without pressure balance
TS EN 13314 Tanks for transporting dangerous goods Service equipment used in tanks Filling hole cover
TS EN 13316 Tanks for transporting dangerous goods Service equipment for tanks Pressure balanced regulating valve
TS EN 13439 Packaging - Energy recovery rate - Definitions and calculation method
TS EN 13440 Packaging - Recycling rate - Recipes and calculation method
TS EN ISO 17495 Water quality - Determination of selected nitrophenols - Mass spectrometric determination gas chromatography and solid-phase extraction method
TS EN 13528-1 Ambient air quality-Diffusive sampling devices for determination of gas and vapor concentrations-Features and test methods-Part 1: General specifications
TS EN 13593 Packaging - Paper bags for household waste collection - Types, specifications and test methods
TS EN 13595-2 Protective clothing for professional motorcycle riders - Jackets, pants, one-piece or split suits - Part 2: Test method for the determination of impact wear resistance
TS EN 13657 Characterization of wastes - Degradation of soluble parts of elements in king water for determination
TS EN 13794 Respiratory protection devices - Self-contained breathing apparatus for escape - Rules, tests, marking
TS EN 13819-1 Hearing protectors - Tests - Part 1: Physical test methods
TS EN 13819-2 Hearing protectors - Tests - Section: 2 acoustic test methods
TS EN 13821 Explosive atmospheres - Explosion prevention and protection - Determination of the lowest combustion energy of dust / air mixtures
TS EN 13920-2 Aluminum and aluminum alloys - Scrap - Part 2: Non-alloy aluminum scrap
TS EN 13920-3 Aluminum and aluminum alloys - Scrap - Part 3: Wire and cable scrap
TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap
TS EN 13920-5 Aluminum and aluminum alloys - Scrap - Part 5: Two or more types of alloy scrap of the same series
TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap
TS EN 13920-7 Aluminum and aluminum alloys - Scrap - Part 7: Cast iron scrap
TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap
TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap
TS EN 13920-10 Aluminum and aluminum alloys - Scrap - Part 10: Aluminum cans of waste beverage
TS EN 13920-11 Aluminum and aluminum alloys - Scrap - Part 11: Aluminum-copper radiator scrap
TS EN 13920-12 Aluminum and aluminum alloys - Scrap - Part 12: Single alloy scrap shavings
TS EN 13920-13 Aluminum and aluminum alloys - Scrap - Part 13: Two or more alloy scrap shavings
TS EN 13920-14 Aluminum and aluminum alloys - Scrap - Part 14: Aluminum packaging scrap
TS EN 13920-15 Aluminum and aluminum alloys - Scrap - Part 15: Aluminum packaging scrap from the coating
TS EN 13920-16 Aluminum and aluminum alloys - Scrap - Part 16: Scrap grade slag, dros and debris
TS EN 13949 Respiratory protection devices - Open circuit self-contained plunging apparatus with pressurized nitrogen and oxygen - Rules, tests, marking
TS EN ISO 13998 Protective clothing - aprons, trousers and jackets for cutting and perforating with knives
TS EN 14045 Packaging - Evaluation of the degradation of packaging materials by tests for applications under defined composting conditions
TS EN 14046 Packaging - Evaluation of final aerobic biodegradability and degradation of packaging materials under controlled composting conditions - Method of analysis of released carbon dioxide
TS EN ISO 14557 Fire hoses - Rubber and plastic and suction hoses and hose assemblies
TS EN ISO 14644-4 Clean rooms and associated environments - Part 4: Design, construction and commissioning
TS EN 50362 Fire resistance test method of large unprotected power and control cables used in emergency circuits
TS EN ISO 14877 Protective clothing for abrasive blasting using granular abrasives
TS EN ISO 14915-1 "Software ergonomics for multimedia user interfaces - part 1: Design principles and framework"
TS EN ISO Software ergonomics for 14915-2 multimedia user interfaces - part 2: Multimedia navigation and control
TS EN ISO Software ergonomics for 14915-3 multimedia user interfaces - part 3: Media selection and composition
TS EN ISO 9921 Ergonomics - Evaluation of voice communication
TS EN 60749-31 Semiconductor circuits - Mechanical and climate test methods - Section 31: Flammability of plastic encapsulated circuits
TS EN 60749-32 Semiconductor circuits - Mechanical and climate test methods - Section 31: Flammability of plastic encapsulated circuits
TS EN 12255-12 Wastewater treatment plants section: 12 control and automation
TS EN 12258-3 Classification of aluminum and aluminum alloy scrap
TS EN 12952-12 Boilers and auxiliary equipment-Boiler water quality
TS EN 12953-10 Boilers and auxiliary equipment-Boiler water quality
TS EN 13078 Devices used to prevent contamination caused by the escape of potable water - Air inlet and flood-fed submersible air space - Family a, type c
TS EN 13079 Contamination prevention devices from backflow of potable water - Air gap with injector - group A, type D
TS EN 14126 Protective clothing - Performance requirements and test methods for protective clothing against infective agents
TS EN ISO 14698-1 Clean rooms and co-controlled environments - Biocontamination control - Part 1: General principles and methods
TS EN ISO 14698-2 Clean rooms and co-controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data
TS EN ISO 15586 Water quality - Determination of trace elements using graphite furnace atomic absorption spectrometry
TSE EN ISO 15680 Water quality-Determination of trace elements by graphite furnace atomic absorption spectrometry method
TS EN ISO 16588 Water quality-Determination of six-component substances-Gas chromatography method
TS EN ISO 17993 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (chamfer) in water after liquid-liquid extraction by fluorescence detector hplcile
TS EN 352-5 Hearing protectors - Safety rules and tests - part 5: Ear muffs that reduce active noise
TS EN 381-10 Protective clothing - For users of chain saws - part 10: Test method for upper body protectors
TS EN ISO 13998 Protective clothing - Protective aprons, trousers and vests against knife sticking and cutting
TS EN 81-28 Elevators - Safety regulations for construction and installation - Passenger and freight elevators - Part 28: Remote alarm for passenger and freight elevators
TS EN 81-58 Lifts - Safety requirements for construction and installation - Inspection and tests - Part 58: Fire resistance test for floor doors
TS EN 60335-2-12 Safety regulations - Part for household electrical appliances 2-12: Particular requirements for heating plates, containers and similar appliances
TS EN 60335-2-26 Safety regulations - for domestic and similar electrical appliances - Part 2-26: Particular requirements for watches
TS EN 60335-2-43 Safety regulations - For household and similar electrical appliances - Part 2-43: Particular requirements for laundry dryers and towel rails
TS EN 60335-2-56 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-56: Particular requirements for projectors and similar devices
TS EN 60335-2-60 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-60: Particular requirements for whirlpool baths
TS 3431 EN 60335-2-74 Safety regulations - For household and similar electrical appliances - Part 2-74: Particular requirements for portable immersion heaters
TS EN 60335-2-28 Safety rules - For electrical appliances used in households and similar places - Part 2-28: Particular requirements for sewing machines
TS EN 60335-2-52 Safety rules - For household and similar electrical appliances - Part 2-52: Particular requirements for oral health devices
TS EN 60335-2-59 Safety regulations for household electrical appliances - Part 2-59: Particular requirements for insecticides
TS EN 60335-2-61 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-61: Particular requirements for heat storage room heaters
TS EN 60335-2-16 Safety regulations - For household and similar electrical appliances - Part 2-16: Particular requirements for food waste grinders
TS 2059 EN 60335-2-10 Safety rules - For household and similar electrical appliances - Part 2-10: Particular requirements for floor maintenance machines and wet scrubbing machines
TS EN 60335-2-101 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-101: Particular requirements for evaporators
TS EN 13911 Protective clothing for firefighters - Characteristics and test methods for firefighters
TS EN 12094-1 Stationary fire extinguishing systems - Components for gas fire extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
TS EN 12094-3 Fixed extinguishing systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stopping devices
TS EN 12259-1 + A1 / A2 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 1: Sprinkler
TS EN 144-3 Respiratory protection devices - Gas cylinder valves - Part 3: Output connections for nitrox and oxygen diving gases
TS EN 1366-7 Fire resistance tests for service installations - Part 7: Conveyor systems and housings
TSE CEN / TS 54-14 Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, operation and maintenance
TS EN 1825-1 Grease separation systems - Part 1: Design, performance and testing, marking and quality control principles
TS EN 1825-1 Grease separation systems - Part 1: Design, performance and testing, marking and quality control principles
TS EN ISO 7933 Thermal environment ergonomics-Analytical determination and interpretation of thermal loads by calculation of expected thermal stress
TS EN ISO 7933 Thermal environment ergonomics-Analytical determination and interpretation of thermal loads by calculation of expected thermal stress
TSE CEN ISO / TS 8662-11 Portable hand tools with motor- Measurement of vibrations in the handle - Part 11: Nailing tools
TS EN ISO 10075-3 Ergonomic principles related to mental workload - Part 3: Principles and requirements
TS EN 12094-4 Fixed fire extinguishing systems - Components for gas fire extinguishing systems - Part 4: Requirements and test methods for tank valve connections and drive systems
TS EN 12255-15 Wastewater treatment plants - Part 15: Measurement of oxygen transfer in clean water in aeration tanks in activated sludge plants
TS EN 12255-14 Wastewater treatment plants - Part 14: Disinfection
TS EN 12940 Garment manufacturing waste - Waste sorting and management
TS EN 13911 Protective clothing for firefighters - Characteristics and test methods for firefighters
TS EN 14135 Coatings - Determination of fire protection adequacy
TS EN 14325 "protective clothing against chemical substances - Test methods and performance classification of chemical protective clothing materials, seams and joints"
TS EN 14435 Respiratory protection devices - Self-contained open-circuit compressed air breathing apparatus designed for use with positive pressure only - Rules, tests, marking
TS EN 14470-1 Fire safety enclosures-Section 1: Safe storage cabinets for flammable liquids
Explosion prevention and protection in underground mines - Protective systems - Section 14591: Explosion-proof ventilation structures in 1-Bar
TS EN ISO 15265 Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or unrest in thermal work environments "
TS EN 60903 Gloves - Insulating material - Working under tension
TS EN 60903 Gloves - Insulating material - Working under tension
TS EN ISO 14004 (Formerly: TS ISO 14004) Environmental management systems - General guide to principles, systems and supporting techniques
TS EN 60895 Working under voltage - Conductive suit for rated voltages up to 800 kv aa and ± 600 kv da
TS EN 60895 Working under voltage - Conductive suit for rated voltages up to 800 kv aa and ± 600 kv da
TS EN 13428 Packaging - Special requirements for production and composition - Prevention by welding reduction
TS EN 13429 Packaging - Reuse
TS EN 13430 Packaging - Recyclable packaging requirements with material recycling
TS EN 13431 Packaging - Packaging recovery conditions in the form of energy recovery, including the lowest calorific value
TS EN 12255-15 Wastewater treatment plants - Part 15: Measurement of oxygen transfer in clean water in aeration tanks in activated sludge plants
TS EN ISO 5667-19 Water quality - Sampling - Part 19: Guide to sampling marine sediments
TS EN ISO 14644-5 Clean rooms and associated environments - Part 5: Operation
TS EN ISO 14644- "clean rooms and associated controlled environments - part 7: Separating housings (fresh air hoods, gloveboxes, insulators and mini-environments)"
TS EN ISO 340 Conveyor belts - Flammability characteristics measured in laboratory - Properties and test method
TS EN 407I protective gloves against thermal risks (heat and / or fire)
TS EN 362Personal protective equipment against fall - Fasteners
TS 5775 EN ISO 6940Textile fabrics - Combustion properties - Determination of ignition properties of test specimens in vertical position
TS EN ISO 6941 Textile fabrics - Combustion properties - Measurement of flame propagation properties of samples in vertical position
TS EN 14470-1 Fire protection - Enclosures - Part 1: Safe storage cabinets for flammable liquids
TS EN 12094-4 Fixed fire extinguishing systems - Components for gas fire extinguishing systems - Part 4: Requirements and test methods for tank valve connections and drive systems
TS EN 858-1 / A1 Separation systems for light liquids (such as oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
TS EN ISO 9562 Water quality - Determination of adsorbable organically bound halogens (aox)
TS 3033 EN 60529 / T2The degree of protection provided by enclosures IP code) (in electrical equipment)
Safety regulations - For household and similar electrical appliances - Part 2005-60335: Particular requirements for roasters, grills and similar portable cooking appliances TS EN EN 2-9-1 / A2
TS EN 858-1 / A1 Separating systems light liquids such as oil and petroleum-Part 1: Principles of product design, performance and testing, marking and quality control
TS EN 60984 / A11 Sleeves for insulating material
TS EN 60984 / A11 Sleeves for insulating material
TS EN 60984 / A1 Sleeves for insulating material
TS EN 60984 / A1 Sleeves for insulating material
TS EN 12952-12 Water tube boilers and auxiliary installations - Part 12: Boiler feed water and boiler water quality
TS EN 50384 In relation to the radio frequency electromagnetic fields (110 mhz - 40 ghz) to which human beings are exposed, the product standard for demonstrating the conformity of radio base stations and fixed terminal stations used in wireless communication systems to reference levels and basic restrictions - For occupationally exposed persons
TS 2212 EN 60335-2-21 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 60335-2-60 / A1 Safety rules - For household and similar electrical appliances - Part 2-60: Particular requirements for whirlpool baths and whirlpool pools (name amendment)
TS EN 12477 / A1 Protective gloves for welders
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 60825-2 Safety of laser products - Part 2: Safety of fiber optic communication systems
TS EN ISO 6530 Protective clothing - Protection against liquid chemicals - Test method for resistance to penetration of materials with liquids
TS EN 60332-1-1 Electrical and optical fiber cable tests at risk of fire - Part 1-1: Vertical flame propagation test for insulating single wire and fiber cable - Apparatus
TS EN 60332-1-2 Tests for electrical and optical fiber cables at risk of fire - Part 1-2: Vertical flame propagation test for insulating single wires and fiber cables
TS EN 60332-1-3 Fire and electrical fiber optic cable tests - Part 1-3: Vertical flame propagation test for insulating single wire and fiber cable
TS EN 60332-2-1 Tests for electrical and optical fiber cables at risk of fire - Part 2-1: Vertical flame propagation test for insulating small single copper wire and fiber cable - Apparatus
TS EN 60332-2-2 Electrical and optical fiber cable tests at risk of fire - Part 2-2: Vertical flame propagation test for insulating small single wire and fiber cable - Procedure for spreading flame
TS EN 60695-11-5 "Fire hazard tests - Test flames - Needle flame test method - Tools, test setup and guidance for verification"
TS EN 12941 / A1 Respiratory protection devices - Reinforced filter devices used with helmet or helmet - Specification, test and marking
TS EN 404 Respiratory protective devices for personal rescue - Individual rescuer with mouthpiece assembly and filter to protect against carbon monoxide
TS EN 60335-2-41 / A1 Safety regulations - For household and similar electrical appliances - Part 2-41: Particular requirements for pumps
TS EN 54-4 / A1 Components of automatic fire detectors part 4: Power supplies -
TS EN 133 Respiratory protection - Classification
TS EN 142 Respiratory protection devices - Mouthpiece - Features, testing and marking
TS EN 362Personal protective equipment for fall protection
TS EN 365Personal protective equipment - Falling from height - General instructions for use and marking
TS EN 402Breathing protection devices - self-contained, open-circuit compressed air respirator for escape, equipped with skin face mask and mouthpiece
TS EN 403 Respiratory protection devices - For self-rescue - Filter devices with nozzle for escape from fire - Rules, tests, marking
TS EN 13427 Packaging - Requirements for the use of standards in the field of packaging and packaging waste
TS EN 13428 Packaging - Special requirements for production and composition - Prevention by resource reduction
TS EN 13429 Packaging-Reusable packaging
TS EN 13430 Packaging - Requirements for packaging recyclable by material recycling
TS EN 60903 Gloves and armrests - Insulating material - For working under tension - Specifications
TS EN 60903 Gloves and armrests - Insulating material - For working under tension - Specifications
TS EN 407 Protective gloves - Against thermal influences (heat and / or fire)
TS EN 61511-2 Functional safety - Safety instrumented systems for the process industry - Part 2: Guidelines for the implementation of IEC 61511-1
TS EN 60695-6-1 Fire hazard test - Part 6-1: Smoke opacity, general guide
TS EN 14604 Smoke alarm systems
TS EN 61243-1 Voltage detectors- Operating under voltage-Section 2: 1kv-36 kv a: A. Capacitive type used for overvoltages
TS EN 12101-6 "smoke and heat control systems - Part 6: Technical specifications for pressure differential systems - Kits"
TS EN 12101-1 Smoke and heat control systems - part 1: Technical specifications for smoke barriers
TS EN 12101-10 Smoke and heat control systems - Part 10: Power supplies
TS EN ISO 12402-1 "personal buoyancy equipment - Part 1: Life jackets for offshore vessels - Safety rules"
TS EN 14451 Devices used to prevent contamination by backflow in potable water - Non-line valves DN 8-DN 80 -Family D, Type A
TS EN 14453 Devices used to prevent backwater contamination in potable water - DN 10-DN 20-flow pipe with air discharge and moving elements - Family D, type C
TS EN 14455 Devices used to prevent contamination by backflow in potable water - Flow cutter for continuous air discharge pipes with Dn10-Dn20 - Family L, type A and type B
TS EN 14717 Welding and similar processes - Environmental inspection list
TS EN 342Protective clothing - Cold protection suits and clothing
TS EN 1717 General features of water pollution prevention devices and prevention of water pollution caused by backflow in drinking water installations
TS EN ISO 6941 Textile fabrics - Combustion properties - Measurement of flame spread properties of vertical samples
TS EN 61034-1 Measurement of smoke density of burning cables under specified conditions - Part 1: Test equipment
TS EN 61034-2 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules
TS EN 62115 Electric toys - Safety
TS EN 529 Respiratory protection devices - Recommendations for use, care, maintenance and storage - Guidance document "
Explosion-proof and protective systems in underground mines - Protective systems - Section 14591: Explosion-resistant ventilation structures in 1-Bar
TS EN 2 / A1 Classes of fires
TS EN 54-10 / A1 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
TS EN 54-11 / A1 Fire detection and fire alarm systems - Part 11: Manually operated alarm devices
TS EN 14126 / AC Protective clothing - Performance requirements and test methods for protective clothing against infective agents
TS EN 143 / AC Protective breathing apparatus-Dust strainers-Features, tests and marking
TS EN 352-4 / A1 Hearing protectors - Safety rules and tests - Part 4: Level-dependent ear plugs
TS EN 12259-1 + A1 / A3 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 1: Sprinkler
TS EN 12101-1 / A1 Smoke and heat control systems - Part 1: Technical specifications for smoke barriers
TS EN 1080 / A2 Protective helmets - For young children - Shockproof
TS EN 12259-1 + A1 / A3 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 1: Sprinkler
TS EN 12574-3 Stationary waste containers - Part 3: Safety and health requirements
TS EN 54-17 Fire detection and fire alarm systems - Part 17: Short circuit isolators
TS EN 54-18 Fire detection and fire alarm systems - Part 18: Input / output devices
TS EN 1103 Textile - Ready-to-wear fabrics for flammability - Detailed process for determining the burning property of ready-made fabrics
TS EN ISO 12402-8 Personal flotation equipment - Part 8: Accessories - Safety rules and test methods
TS EN ISO 12402-10 Personal flotation equipment - Part 10: Selection and application of personal flotation equipment and other related materials
TS EN 12435 Health Informatics- Expressing the measurement results in health sciences
TS EN ISO 16000-9 -interior air - Part 9: Determination of volatile organic compound emissions from building materials and furniture - Emission test chamber method
TS EN ISO 16000-10 Indoor air - Part 10: Determination of volatile organic compound emissions from building materials and furniture - Emission test cell method
TS EN ISO 16000-11 - indoor air - Part 11: Determination of volatile organic compound emissions from building materials and furniture - Sampling, preservation of samples and preparation of test specimens
TS EN 1146 Respiratory protection devices - Self-contained open-circuit compressed air breathing apparatus used with a hood - Rules, test, marking
TS EN 165 Eye protectors-Personal-Terms
TS EN 469Protective clothing for firefighters -Features and test methods for fire-fighting protective clothing
TS EN 60335-2-59 / A1Security rules - For household electrical appliances - Part 2-59: Particular requirements for insecticides
TS EN 12940 Footwear waste production - Classification and management of waste
Greenhouse gases - Part 14064: Guidelines and specifications for the calculation and reporting of greenhouse gas emissions and removals at the enterprise level TS EN ISO 1-14064
Greenhouse gases - Part 14064: Guidelines and specifications for the calculation, monitoring and reporting activities of greenhouse gas emissions reductions or removal improvements TS EN ISO 2-14064 (Formerly: TS ISO 2-2)
TS EN ISO 14064-3 (Formerly: TS ISO 14064-3) Greenhouse gases - Part 3: Guidelines and specifications for the approval and verification of greenhouse gas declarations
TS EN 1634-3 / AC Fire resistance test-Doors and shutters-Part 3: Smoke control doors and shutters
TS EN ISO 9241-110 Ergonomics of human-system interaction - Part 110: Principles of dialogue
TS EN ISO 9509 Water quality - Toxicity test to evaluate the prevention of nitrification of activated sludge microorganisms
TS EN ISO 11064-7 Ergonomic design of control centers - Part 7: Principles for the evaluation of control centers
TS EN 12094-5 Fixed fire extinguishing systems - Components of gas extinguishing systems - Part 5: Requirements and test methods for valves with high and low pressure selectors and their actuators
TS EN 12094-6 Stationary fire extinguishing systems - Components of gas extinguishing systems - Part 6: Requirements and test methods for non-electrical deactivation devices
TS EN 12094-8 Stationary fire extinguishing systems-Parts of gas systems-Section 8: Characteristics of fasteners and test methods
TS EN 12873-3 Effect of substances on drinking and potable water - Effect of migration - Part 3 - Test method for ion exchange and adsorbent resins
TS EN 12873-4 Effect of substances on drinking and potable water - Effect of migration - Part 4 - Test method for water treatment membranes
TS EN ISO 14040 Environmental management - Lifelong assessment - Principles and framework
TS EN ISO 14044 Environmental management - Lifelong assessment - Requirements and guidance
TS EN ISO 14044 Environmental management - Lifelong assessment - Requirements and guidance
TS EN 14944-1 Effect of water hardening products for human consumption - Test methods - Part 1: Effect of products produced during production on sensory properties
TS EN ISO 15023-1 Plastic - Poly (vinyl alcohol) (pval) materials - Part 1: Basics for short demonstration systems and features
TS EN 54-4 / A2 Fire detection and fire alarm systems section 4: Power supply equipment
TS ISO 2023 Rubber boots - Lined industrial vulcanized rubber boots - Specifications
TS EN 60335-2-43 / A1Security rules - For household and similar electrical appliances - Part 2-43: Particular requirements for tumble dryers and towel rails
TS EN 60335-2-14 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-14: Particular requirements for kitchen machines
TS ISO 2023 Rubber shoes - Lined vulcanized rubber boots for industrial use - Specifications
TS EN 54-4 / A2 Components of automatic fire detectors part 4: Power supplies
TS EN 54-7 / A2 Fire detection and alarm systems - Part 7: Smoke detectors - Spot detectors operating by scattered light, passing light or ionization
TS EN 143 / A1 Protective breathing apparatus-Dust strainers-Features, tests and marking
TS EN ISO 4126-2 / AC Safety devices for overpressure protection - Part 2: Safety devices with explosion discs
TS EN 12101-6 / AC Smoke and heat control systems - Part 6: Technical specifications for pressure differential systems - Kits
TS EN 13832-3 Chemical protective footwear - Part 3: Rules for highly resistant chemical footwear in laboratory conditions
TS EN 61034-1 Measurement of smoke density of burning cables under specified conditions - Part 1: Test device
TS EN 61034-2 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules
TS EN 1825-1 / AC Installation for oil separation - Part 1: Design rules, performance and test marking and quality control
TS EN 60335-2-61 / A1 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-61: Particular requirements for room heaters with thermal storage
TS EN 365 / AC Personal protective equipment against falling from a height - Instructions for use, general rules for maintenance, periodic inspection, repair, marking and packaging
TS EN 469 / AC Protective clothing for firefighters - Performance requirements for fire-fighting protective clothing
TS EN ISO 12402-2 Personal flotation equipment - Life jackets, performance level 275 - Safety regulations
TS EN ISO 12402-3 Personal flotation equipment - Life jackets, performance level 150 - Safety regulations
TS EN ISO 12402-4 Personal flotation equipment - Life jackets, performance level 100 - Safety regulations
TS EN ISO 12402-5 Personal flotation equipment - Life jackets, performance level 50 - Safety regulations
TS EN ISO 12402-6 Personal flotation equipment - Life jackets, performance level section 6- Safety rules and additional tests
TS EN ISO 12402-9 Personal flotation equipment section 9: Test methods
TS EN 469 / A1 Protective clothing for firefighters - Performance requirements for fire-fighting protective clothing
TS EN ISO 12402-2 Personal flotation equipment - Part 2: Life jackets, performance level 275 - Safety regulations
TS EN 469 / AC Protective clothing for firefighters - Performance requirements for fire-fighting protective clothing
TS ISO 10054 Internal combustion compression-ignition (diesel) engines - Smoke meters from steady-state engines - Filter type smoke meter
TS EN 60332-2-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-2: Vertical flame propagation test for a single insulated small wire or cable - Process for diffusion flame
TS EN 60332-2-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-1: Vertical flame propagation test for a single insulated small wire or cable - Equipment
TS EN 60332-1-3 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles
TS EN 60332-1-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame
TS EN 60332-1-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment
TS EN 137Breathing protection devices - Self-contained open-circuit compressed air breathing apparatus specifications, test marking
TS EN 469 / A1 Protective gloves - General specifications and test methods
TS EN 60825-4 Safety of laser products - Part 4: Laser protectors
TS EN ISO 12402-7 Personal flotation equipment - Part 7: Material and components-Safety requirements and test methods
TS EN 13317 + A1 Tanks for transporting hazardous materials - Service equipment for tanks - Man-hole opening group
TS EN 1731 Personal eye protection - Mesh eye and face protection
TS EN 1731 Cage eye and face protection - for industrial and non-industrial use against mechanical hazards and / or heat
TS EN 15132 Mobile waste containers - 1 Container bodies for up to 700 l capacity - Performance requirements and test methods
TS ISO 1996-2 Acoustics - Description, measurement and evaluation of environmental noise - Part 2: Determination of environmental noise levels
TSE CEN ISO / TS 17892-10 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 10: Direct shear test
TS EN 14390 Fire test - Large-scale room reference test for surface products
TS EN 3-8 Portable fire extinguishers - Part 8: Additional rules for the construction, resistance to pressure and mechanical tests of fire extinguishers at a maximum permissible pressure or pressure less than 30 bar, other than those specified in most 3-7
TS EN 3-9 Portable fire extinguishers - Part 9: Additional requirements for pressure resistance of fire extinguishers with Co2, other than those specified in most 3-7
TS EN 54-18 / AC Fire detection and fire alarm systems - Part 18: Input / output devices
TS EN 1005-5 Safety of machinery-Physical performance of man-Part 5: Risk assessment for high frequency repetitive handling
TS EN 1005-5 Safety of machinery-Physical performance of man-Part 5: Risk assessment for high frequency repetitive handling
TS EN ISO 5667-1 Water quality-Sampling section 1: Rules for preparing sampling programs
TS EN ISO 5667-1 / ACWater quality-Sampling section 1: Rules for preparing sampling programs
TS EN 12101-10 / AC Smoke and heat control systems - Part 10: Power supply
TS EN ISO 12402-5 / AC Personal flotation equipment - Part 5: Life jackets, performance level 50 - Safety regulations
TS EN 15169 Waste characterization - Determination of combustion loss in waste, sludge and sediment
TSE ISO / TS 11602-1 Fire protection - Portable and mobile fire extinguishers - Part 1: Selection and placement
TS EN 3524 Aviation Series - Steel FE-PL1505 (15CrMoV6) - Air-melted - Hardened and tempered - Sheet and strip - 2mm? a? 6 mm - 1080 MPa? Rm? 1 280 MPa
TS EN 3526 Aviation series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate and Strip - 0,5 mm <= a <= 6 mm - 980 Mpa <= Rm <= 1180 MPa;
TS EN 3531 Aviation series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction molten and re-melted vacuum arc - Solution treatment and precipitation treatment - Sheet and strip - A? 6 mm - 1 750 MPa? Rm? 2 000 MPa
TS EN 14582 Characterization of wastes - Determination of halogen and sulfur content - Combustion and determination methods with oxygen in closed systems
TS EN 13921 Personal protective equipment - Ergonomic principles
TS EN 13921 Personal protective equipment - Ergonomic principles
TS EN 12798 Transport quality management system - Road, rail and domestic maritime transport - Quality management system requirements to complete ISO 9001 for safety in the transport of dangerous goods
TS EN 13501-1 + A1 Construction products and building elements, fire classification section 1: Classification using data from behavior tests against fire
TS EN 12101-10 / AC Smoke and heat control systems - Part 10: Power supplies
TS EN 13567 + A1 Protective clothing - Hand, arm, chest, abdomen, leg, limb and face protectors for fencing players - Rules and test methods
TS EN 14120 + A1 Protective clothing - Wrist, palm, knee and elbow protectors for users of roller skating equipment - Rules and test methods
TS EN 14120 + A1 Protective clothing - Wrist, palm, knee and elbow protectors for users of roller skating equipment - Rules and test methods
TS 3431 EN 60335-2-74 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-74: Particular requirements for portable immersion heaters
TS EN 1866-1 Portable fire extinguishers - Part 1: Characteristics, performance and test methods
TS EN ISO 20988 Air quality - Guidance for estimating uncertainty of measurement
TS EN 1486 Protective clothing - for firefighters - Specification and test methods for specialist firefighters' clothing
TS EN 1497 Personal protective equipment against fall-Rescue belts
TS EN ISO 4869-3 Acoustics - Hearing protectors - Part 3: A simplified method for measuring interception loss of ear protectors intended for quality inspection
TS EN 60335-2-106 Safety regulations - For electrical appliances used in households and similar places - Part 2-106: Particular requirements for heating units and heated carpets for room heating installed under removable floor covers
TS EN 13443-2 + A1 Water conditioning equipment used in the building-Mechanical filters-Part 2: Particulate value 1fm up to 80 µm Performance safety and test rules
TS EN 14652 + A1 Water treatment equipment for buildings - Membrane separation devices - Performance, safety and test rules
TS EN 14812 + A1Industrial water treatment device-Chemical dosing system-Preset dosing systems-Features for performance, safety and testing
TS EN 14897 + A1 Indoor water conditioning equipment - Low pressure ultraviolet radiators - Mercury devices performance safety and test rules
TS EN ISO 14557 / A1 Fire fighting hoses - Rubber and plastic suction hoses and hose assemblies
TS EN ISO 3582 / tst A1 Flexible porous polymeric materials-Laboratory evaluation of horizontal combustion properties of small test specimens exposed to a small flame
Safety regulations - For household and similar electrical appliances - Part 2005-60335: Particular requirements for roasters, grills and similar portable cooking appliances TS EN EN 2-9-12 / A2
TS EN 3-8 / AC Portable fire extinguishers - Part 8: Additional requirements for the construction, resistance to pressure and mechanical tests of fire extinguishers at a maximum permissible pressure or pressure below 30 bar, other than those specified in most 3-7
TS EN 3-9 / AC Portable fire extinguishers - Part 9: Additional requirements for pressure resistance of fire extinguishers with Co2, other than those specified in most 3-7
TS EN 54-17 / AC Fire detection and fire alarm systems - Part 17: Short circuit isolators
TS EN 13443-1 + A1 Water conditioning equipment in buildings - Mechanical filters - Part 1: Particle value 80 µm to 150 µm Specification for performance, safety and testing
TS EN 60335-2-105 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-105: Particular requirements for multifunctional shower enclosures
TS EN 60335-2-106 Safety regulations - For household and similar electrical appliances - Part 2-106: Particular requirements for heating units installed under heated carpets and removable floor coverings for heating the room
Safety regulations for household and similar electrical appliances
TS EN 14387 + A1 Respiratory protection devices - Gas filters and combined filters - Requirements, tests and marking
TS EN 349 + A1 Safety in machines - Minimum clearances to protect human body parts against crushing
TS EN 574 + A1 Safety in machines - two-hand control devices - Functional features - Design principles
TS EN 1028-2 + A1 Fire extinguishing pumps - Primary centrifugal pumps for fire extinguishing - Part 2: Verification of general and safety rules
TS EN 1037 + A1 Safety in machines - Preventing unexpected operation
TS EN 1093-2 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 2: Measurement of emission rate for a given pollutant by tracer gas method
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 10326: General requirements TS EN ISO 1-1
TS EN 659 + A1 Protective gloves - for firefighters
TS EN ISO 9241-151 Ergonomic interaction of people from systems - Part 151: Guiding network users
TS EN 349 + A1 Safety in machines - Minimum intervals to avoid the danger of crushing parts of the human body
TS EN 574 + A1 Safety in machines-Two-hand control devices-Functional features-Design principles
TS EN 1028-2 + A1 Fire extinguishing pumps - Primary centrifugal pumps for fire extinguishing - Part 2: Verification of general and safety rules
TS EN 1037 + A1 Safety on machines - Preventing unexpected operation
TS EN 1093-2 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 2: Measurement of emission rate for a given pollutant by tracer gas method
TS EN 1093-3 + A1 Safety in machinery - Emission assessment of airborne hazardous substances section 3: Emission rate of a specified pollutant - Bench test method using actual pollutant
TS EN 61310-1 Safety on machines - Display, marking and actuating - Part 1: Rules for visible, audible and tactile signs
TS EN 61310-2 Safety on machines - Display, marking and actuating - Part 2: Marking-related features
TS EN 61310-3 Safety in machines - Display, marking and actuating - Part 3: Rules for the installation and operation of actuating mechanisms
TS EN 62311 Evaluation of electronic and electrical equipment for human exposure to electromagnetic fields (0 hz - 300 ghz)
TS EN ISO 13857 Safety in machines - Safety distances to prevent danger in areas where arms and legs can be reached
TS EN 1568-2 Fire extinguishing agents - Foam concentrates - Part 2: Specification for high-expansion foam concentrates applied to the surface of water immiscible liquids
TS EN 1568-3 Fire extinguishing agents - Foam concentrates - Part 3: Specification for low expansion foam concentrates applied to the surface of water immiscible liquids
TS EN 1568-4 Fire extinguishing agents - Foam concentrates - Part 4: Specification for low-expansion foam concentrates applied to the surface of water-miscible liquids
Safety rules - For electrical equipment used in households - Section 60335-2: Particular requirements for electrical portable heating appliances and similar devices
TS EN 60335-2-16 / A1Security rules - For household electrical appliances - Part 2-16: Particular requirements for food waste disposers
TS EN 60335-2-26 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-26: Particular requirements for watches
TS 2059 EN 60335-2-10 / A1 Safety rules - For electrical appliances used in households and similar places - Part 2-10: Particular requirements for floor maintenance machines and scrubbing machines
TS EN 60335-2-12 / A1 Safety regulations - For household and similar electrical appliances - Part 2-12: Particular requirements for heating plates, dishes and similar appliances
TS EN 1093-9 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 9: Pollutant concentration parameter, room method
TS EN 12198-3 + A1 Safety in machinery - Assessment and reduction of risks caused by radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
TS EN 12198-3 + A1 Safety in machinery - Assessment and reduction of risks caused by radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
TS EN 15602 Private security service providers - Terminology
TS EN 813Personal fall protection - Seat belt
TS EN ISO 20643 Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS EN 13071-1 Stationary waste bins with capacity up to 5000 1 with top lift and bottom discharge - Part 1: General requirements
TS EN 15004-1 Fixed fire-fighting systems - Gas-jet systems - Part 1: Design, installation and maintenance
TS EN 15004-2 Stationary fire-fighting systems - Gas-jet systems - Part 2: Design and physical properties of gas-jet systems for Fk-5-1-12 extinguishing media
TS EN 15004-10 Stationary fire fighting systems - Gas-jet systems - Part 10: Design and physical properties of gas-jet systems for Ig-541 extinguishing media
TS EN 15267-3 Air quality - Certification of automatic measuring systems - Performance criteria and test procedures for automatic measuring systems used to monitor emissions
TS EN ISO 17491-3 Protective clothing - Test methods for clothing that protects against chemical substances - Part 3: Determination of resistance to penetration of a liquid jet (jet test)
TS EN ISO 17491-4 Protective clothing - Test methods for clothing that protects against chemical substances - Part 4: Determination of resistance to penetration of the sprayed liquid (spray test)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN 15549 Air quality - Standard method for measuring the concentration of benzoapyrene in ambient air
TS EN ISO 16000-9 / AC Indoor air - Part 9: Determination of volatile organic compound emissions from construction materials and furnishing - Emission test chamber method
TS EN 547-1 + A1 Safety in machinery - Human body measurements - Part 1: Principles for determining the dimensions of the openings required for the entire body to reach the machines
TS EN 547-1 + A1 Safety in machinery - Human body measurements - Part 1: Principles for determining the dimensions of the openings required for the entire body to reach the machines
TS EN 50131-2-2 Alarm systems - Entry and hold systems - Part 2-2: Entry sensors - Passive infrared sensors
TS EN 50131-2-4 Alarm systems - Entry and hold systems - Part 2-4: Requirements for combined passive infrared and microwave sensors
TS EN 50264-3-1 Railway applications-Power and control cables of special fire performance railway vehicles-Section 3: Reduced cross section and cross-linked elastomeric insulation-Single core cables "
TS EN 547-2 + A1 Safety in machinery - Dimensions of the human body - Part 2: Principles for determining the required dimensions for access openings
TS EN 547-2 + A1 Safety in machinery - Dimensions of the human body - Part 2: Principles for determining the required dimensions for access openings
TS EN 547-3 + A1 Safety in machinery - Human body measurements - Part 3: Anthropometric data
TS EN 547-3 + A1 Safety in machinery - Human body measurements - Part 3: Anthropometric data
TS EN 614-2 + A1 Safety in machines - Principles of ergonomic design - Part 2: Interactions between machine design and work tasks
TS EN 614-2 + A1 Safety in machines - Principles of ergonomic design - Part 2: Interactions between machine design and work tasks
TS EN 842 + A1 Safety in machinery - Visual hazard signals - General specifications, design and test methods
TS EN 981 + A1 Safety in machinery - Audible and visual hazard systems and information signals
TS EN 12198-1 + A1 Safety in machinery - Assessment and reduction of the risk of radiation emitted by the machine - Part 1: General principles
TS EN 12198-1 + A1 Safety in machinery - Assessment and reduction of the risk of radiation emitted by the machine - Part 1: General principles
TS EN 50382-1 Railway applications - Railway rail high temperature power cables requirements have special fire performance - Part 1: General
TS EN 50382-2 Railway applications - Railway railway high temperature power cables special fire performance - Part 2: Insulated 120 ° c or 150 ° c cables with single core silicone rubber
TS EN 50505 Basic standard for the assessment of human exposure to electromagnetic fields caused by equipment for resistance welding and alloy processing
TS EN 12198-2 + A1 Safety in machinery - Assessment and mitigation of risks caused by radiation emitted by machinery - Part 2: Measurement process of radiation emission
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for food waste disposers
TS EN 547-1 + A1 Safety in machines - Human body measurements - Part 1: Principles for the determination of the required dimensions of the openings for the entire body to reach the machines
TS EN 547-1 + A1 Safety in machines - Human body measurements - Part 1: Principles for the determination of the required dimensions of the openings for the entire body to reach the machines
TS EN 614-2 + A1 Safety in machines - Principles of ergonomic design - Part 2: Interactions between machine design and work tasks
TS EN 614-2 + A1 Safety in machines - Principles of ergonomic design - Part 2: Interactions between machine design and work tasks
TS EN 842 + A1 Safety visual hazard signals on machines-General features design and test methods
TS EN 1028-1 + A1 Fire extinguishing pumps - Primary centrifugal pumps for fire extinguishing - Part-1: Classification-General and safety rules
TS EN 1093-6 + A1 Safety in machines - Evaluation of the spread of harmful substances transportable by air - Part 6: Mass separation efficiency with grooved output
TS EN 1093-7 + A1 Safety in machinery - Emission assessment of airborne hazardous substances from machinery - Part 7: Mass separation efficiency - Ducted outlet
TS EN 1093-8 + A1 Safety in machinery - Emission assessment of dangerous substances carried by air from machinery - Part 8: Pollutant concentration parameter - Test table method
TS EN 1093-9 + A1 Safety in machinery - Emission assessment of airborne hazardous substances from machinery - Part 9: Pollutant concentration parameter - Room method
TS EN 1093-11 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 11: Pollutant removal index
TS EN 12198-1 + A1 Safety in machines - Risk assessment and reduction of the radiation emitted by the machine part 1: General principles
TS EN 12198-1 + A1 Safety in machines - Risk assessment and reduction of the radiation emitted by the machine part 1: General principles
TS EN ISO 13732-1 Ergonomics of the thermal environment - Methods for evaluating human responses to contact with surfaces - Part 1: Hot surfaces
TS EN ISO 13753 Mechanical vibration and shock - Hand and arm vibration - Method for measuring the ability of flexible materials to transmit vibration transmitted to the body by the hand and arm system
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 20643 Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS EN 13059 + A1 Safety of industrial trucks - Test methods for vibration measurement
TS EN 143 / AC Protective breathing apparatus - Dust sieves - Specification, tests and marking
TS EN ISO 9241-151 Ergonomics of human-system interaction part 151: World wide network user interfaces guide
TS EN ISO 9241-171 Human - Ergonomics of system interaction - Part 171: Software access guide
TS EN 894-1 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive - Part 1: General principles for interaction between the display and control drive and human
TS EN 894-1 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive - Part 1: General principles for interaction between the display and control drive and human
TS EN 894-2 + A1 Safety in machinery - Ergonomic guidelines for the design of the displays and the control drive - Part 2: Displays
TS EN 894-2 + A1 Safety in machinery - Ergonomic guidelines for the design of the displays and the control drive - Part 2: Displays
TS EN 894-3 + A1 Safety in machinery - Ergonomic requirements for the design of displays and control drives - Part 3: Control drives
TS EN 894-3 + A1 Safety in machinery - Ergonomic requirements for the design of displays and control drives - Part 3: Control drives
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN 1005-2 + A1 Safety in machinery - Physical performance of man - Part 2: Manually operating the machine and its components
TS EN 1005-2 + A1 Safety in machinery - Physical performance of man - Part 2: Manually operating the machine and its components
TS EN 1005-3 + A1 Safety in machinery - Physical performance of man - Part 3: Recommended force limits for machine operation
TS EN 1005-3 + A1 Safety in machinery - Physical performance of man - Part 3: Recommended force limits for machine operation
TS EN 1032 + A1 Mechanical vibration - Testing of moving machines to determine vibration emission
TS EN 1005-4 + A1 Safety in machinery - Physical performance of man - Part 4: Assessment of body postures and movements during operation according to the machine
TS EN 1005-4 + A1 Safety in machinery - Physical performance of man - Part 4: Assessment of body postures and movements during operation according to the machine
TS EN 60335-2-43 / A2Security rules - For household and similar electrical appliances - Part 2-43: Particular requirements for laundry dryers and towel rails
TS EN 60335-2-14 / A1 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-14: Particular requirements for kitchen machines
TS EN 60335-2-60 / A2 Safety regulations - For household and similar electrical appliances - Part 2-60: Particular requirements for whirlpool baths and whirlpool pools
TS EN 60335-2-61 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-61: Particular requirements for room heaters with thermal storage
TS EN ISO 22868 Forest and horticultural machinery - Noise test code for hand-held machines with internal combustion engines - engineering method (accuracy 2)
TS EN 13501-3 + A1 Construction products and components - Fire classification - Part 3: Classification using data obtained from fire resistance tests on products and components used in building service installations: Fire resistant air ducts and fire dampers
TS 2212 EN 60335-2-21 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 60335-2-96 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-96: Particular requirements for flexible sheet-shaped heating elements for room heating
TS EN 60335-2-32 / A1Security rules - For household and similar electrical appliances - Part 2-32: Particular requirements for massage devices
TS EN 60335-2-52 / A1Security rules - For household electrical appliances - Part 2-52: Particular requirements for oral health devices
TS EN 60335-2-56 / A1Security rules - For household electrical appliances - Part 2-56: Particular requirements for projectors and similar devices
TS EN 60335-2-78 / A1Security rules - For household electrical appliances - Part 2-78: Particular requirements for outdoor barbecues
TS EN 60335-2-101 / A1 Safety regulations - For household and similar electrical appliances - Part 2-101: Particular requirements for evaporators
TS EN 60335-2-108 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-108: Particular requirements for electrolysers
TS EN 1991-1-2 / AC Effects on structures - Part 1-2: General effects - Effects on structures exposed to fire (eurocode 1)
TS EN 614-1 + A1 Safety in machines - Ergonomic design principles - chapter 1: Terminology and general principles
TS EN 614-1 + A1 Safety in machines - Ergonomic design principles - chapter 1: Terminology and general principles
TS EN 15267-1 Air quality - Certification of automatic measuring systems - chapter 1: General principles
TS EN 15267-3 Air quality - Certification of automatic measuring systems - Part 3: Performance criteria and test procedures for automatic measuring systems used to monitor constant source emissions
TS EN 1760-2 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principle for the design and testing of pressure-sensitive edges and pressure-sensitive rods
TS EN 405 + A1 Respiratory protection devices - Filter half masks with protective valve against gases or gases and particles - Specifications, tests and marking
TS ISO 8178-1 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 1: Measurement of exhaust emissions of gaseous and particulate matter in the test bed
TS ISO 8178-2 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 2: Measurement of gas and particulate exhaust emissions under field conditions
TS ISO 8178-4 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 4: Steady state test cycles for different engine applications
TS ISO 8178-5 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 5: Test fuels
TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables installed vertically - Equipment
TS EN 60332-3-21 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-21: Test for vertical flame spread of bundled wires or cables vertically mounted - Category af / r
TS EN 60332-3-22 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-22: Vertical flame spread test of bundled wires or cables vertically - Category a
TS EN 60332-3-23 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flammability of vertically mounted bundled wires or cables - Category b
TS EN 60332-3-25 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-25: Vertical flame propagation test of bundled wires or cables vertically mounted - Category d
TS EN 60332-3-24 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-24: Vertical flame propagation test of bundled wires or cables vertically mounted - Category c
TS EN 1143-1 + A1 / tst AC Safe storage units - Rules for theft resistance, classification and test methods - Part 1: Safes, atm safes, vault doors and vault rooms
TS EN 15182-1 + A1 Hand-held water spray guns for fire fighting purposes - Part 1: General features
TS EN 15182-4 + A1 Hand held water spray guns for fire fighting purposes - Part 4: Pn 40 type high pressure water spray gun
TS EN 420 + A1 Protective gloves - General specifications and test methods
TS EN ISO 14050 Environmental management - Terms and definitions
TS EN ISO 9241-302 Human system interaction ergonomics - Part 302: Terminology for electronic display units
TS EN 2 / A1 Classes of fires
TS EN 1760-2 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods
TS EN 14710-1 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 1: Classification, general and safety rules
TS EN 1032 + A1 Testing of moving machines for mechanical vibration-vibration emission determination
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN 894-2 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive section 2: Displays
TS EN 894-2 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive section 2: Displays
TS EN 1889-2 + A1 Underground mining machines - Underground moving machines - Safety - Part 2: Rail locomotives
TS EN 15613 Knee and elbow protectors for indoor sports - Safety rules and test methods
TS EN 15613 Knee and elbow protectors for indoor sports - Safety rules and test methods
TS EN 12942 / A2 Respiratory protection devices - Power assisted filter devices with full face masks, half masks or quarter masks - Specification, test and marking
TS EN 12941 / A2 Respiratory protection devices - Reinforced filter devices used with helmet or helmet - Specification, test and marking
TS EN 12312-16 + A1 Aircraft ground support equipment - Special requirements - Part 16: Air start equipment
TS EN ISO 9920 Ergonomics of the thermal environment - Estimation of thermal insulation and evaporation resistance of a garment suit
TS EN 12920 + A1 Characterization of wastes - Methodology for determination of the extractability of wastes under certain conditions
TS EN 13501-1 + A1 Classification of building products and structural elements related to fire - Part 1: Classification using fire reaction tests data
TS EN ISO 15004-1 Ophthalmic instruments - General specifications and test methods - Part 1: General requirements applicable to all ophthalmic instruments
TS EN ISO 9241-20 Ergonomics of human-system interaction - Part 20: Accessibility guide for ICT devices and services
TS EN 13463-1 Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic methods and rules
Explosion prevention and protection in underground mines - Protective systems - Part 14591: Passive water slotted barriers
TS EN ISO 11885 Water quality - Determination of selected elements by inductively coupled plasma atomic emission spectrometer (ICP-OES)
TS EN ISO 23913 Water quality - Determination of chromium vi - Flow method (FIA and CFA) and spectrometric determination.
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Structural fire design (Eurocode 5)
tst 201079614 Guide to dimensions designed for older people
TS EN 15267-1 Air quality - Certification of automatic measuring systems - Part 1: General principles
TS EN 15267-2 Air quality - Certification of automatic measuring systems part 2: Initial assessment of quality management systems of Ams (automatic measuring systems) manufacturers and final certification supervision for production processes
TS EN 1827 + A1 Respiratory protection devices - Half masks with detachable filter for protection against gases and particles or particles only, with detachable filter - Specification, tests, marking
tst EN ISO 15540 Ships and marine technology - Hose reinforcement fire resistance - Test methods
TS EN 60695-11-5 Fire hazard test - Part 11-5: Test flames - Needle flame test method - Devices, verification test set-up and guidance
TS EN ISO 11348-2 Water quality-Determination of inhibition effects of water samples on light emissions of vibrio fischeris (luminescent bacteria test) part 2: by liquid drying method
TS EN ISO 11348-3 Water quality-Determination of inhibition effects of water samples on light emissions of vibrio ficheri (Luminescent bacteria test) Section 3: Freeze-dried bacteria method
TS EN ISO 11885 Water quality - Determination of selected elements by inductively bonded plasma optical emission spectrometer (ICP-OES)
TS EN 60335-2-7 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-7: Particular requirements for washing machines
Safety regulations for household and similar electrical appliances
TS EN 60335-2-60 / A12 Safety regulations - For household and similar electrical appliances - Part 2-60: Particular requirements for whirlpool baths and whirlpool pools
TS EN 60335-2-60 / A11 Safety regulations - For household and similar electrical appliances - Part 2-60: Particular requirements for whirlpool baths and whirlpool pools
TS EN 60335-2-4 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2 - 4: Particular requirements for rotating spinners
TS EN 60335-2-30 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-30: Particular requirements for room heaters
TS EN 60335-2-59 / A2Security rules - For household electrical appliances - Part 2-59: Particular requirements for insecticides
TS 3431 EN 60335-2-74 / A2 Safety rules - For electrical devices used in households and similar places - Part 2-74: Special rules for portable immersion heaters
TS EN 3-10 Mobile fire extinguishers - Part 10: Provisions for assessing the suitability of the portable fire extinguisher to the most 3-7
TS EN 615Fire protection - Fire extinguishing agents - Properties for powders (excluding class d powders)
TS EN 61249-2-37 Materials for printed circuit boards and other interconnection structures - Part 2-37: Reinforced base materials, coated and uncoated - Modified non-halogenated, flammability (vertical ignition test), epoxy fabric e-Glass sheet sheets, copper plating for lead-free fittings
TS EN 61112 Working under voltage - Electrical insulation cover
TS EN 61111 Working under voltage - Electrical insulation coating
TS EN 14434 Whiteboards for educational institutions - Ergonomic, technical and safety requirements and related test methods
TS EN 50194-1-household electrical appliances for the detection of combustible gases - Part 1: Test methods and performance characteristics
TS EN 60335-2-21 / A2Security rules - For household and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 60335-2-108 Safety regulations - For electrical appliances used in domestic and similar areas
TS EN 60204-1 / A1 Safety in machinery - Electrical equipment for machines - Part 1: General requirements
TS EN 50131-2-3 Alarm systems - Unauthorized access and containment systems - Part 2-3: Rules for microwave detectors
TS EN 50131-2-5 Alarm systems - Intrusion and containment systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
TS EN 50131-2-6 Alarm systems - Unauthorized entry and retention systems - Part 2-6: Opening contacts (magnetic)
TS EN 50131-8 Alarm systems - Intrusion and panic alarm systems - Part 8: Safety fog element / systems
TS EN ISO 8178-6 / T1 (Number modification, TS ISO 8178-6) Reciprocating internal combustion engines - Measuring exhaust emissions - Part 6: Measurement results and test report
TS EN 61243-1 / A1 Working under voltage - Voltage detectors - Section 1: Capacitive type used for voltages exceeding 1 kv a.a
TS EN 50364 Electronic system surveillance (eas) - Protection of people exposed to electromagnetic fields emitted from devices operating in the frequency range 0 hz - 10 ghz used in systems of radio frequency identification (RFID) and similar applications
TS EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide during arc welding, cutting and gouging (NO) and nitrogen dioxide (NO2) emission rates determination
TS EN ISO 28927-7 Hand-held portable power tools - Test methods for measuring vibration - Part 7: Sheet metal working and cutting tools
TS EN ISO 28927-5 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
TS EN 1319 Air heaters-Gas burners-Forced convexion-Used for heating the space in the houses -Net heat load 70 can not exceed kw-Burner with ventilator
TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables vertically mounted - Equipment
TS EN 60332-3-21 Cables - Tests in electrical and fiber optic cables under fire conditions - Part 3-21: Test for vertical flame spread of bundled wires or cables vertically mounted - Category af / r
TS EN 60332-3-22 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-22: Test for vertical flame spread of bundled wires or cables vertically mounted - Category a
TS EN 13284-2 Constant source emissions - Determination of the low range mass concentration of powder - Part 2: Automatic measuring systems
TS EN 60332-3-23 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flame spread of bundled wires or cables vertically mounted - Category b
TS EN 60332-3-24 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category c
TS EN 60332-3-25 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category d
TS EN 60645-7 Electroacoustic - Hearing aids - Part 6: Instruments for the measurement of otoacoustic emissions
TS EN 60645-6 Electroacoustic - Hearing aids - Part 7: Instruments for measuring the response of sound to the brain
TS EN 62080 Home and similar audio signal devices
TS EN 60335-2-41 / A2Security rules - For household electrical appliances - Part 2-41: Particular requirements for pumps
TS EN 60335-2-2 Safety regulations - For household electrical appliances and similar - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning devices
TS EN 60335-2-13 Safety regulations - For electrical appliances used in households and similar places - Part 2-13: Particular requirements for deep-fat toasters, frying pans and similar appliances
TS EN 62115 / tst IS1 Electric toys - Safety
TS ISO 14004 / T1 (Number modification, TS EN ISO 14004) Environmental management systems - General guide to principles, systems and supporting techniques
TS EN ISO 14063 Environmental management - Environmental communication - Guidelines and examples
TS EN 60335-2-54 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2 - 54: Particular requirements for surface cleaning devices using liquids or vapors used in households
TS EN 61230 Operating under stress - portable equipment for earthing or grounding and short-circuit
tst EN 60335-2-11 Safety regulations - For domestic and similar electrical appliances - Part 2-11: Particular requirements for drum dryers
TS EN 1777 Hydraulic platforms used in fire and rescue services (hps) safety rules and test methods
TS EN 1366-4 + A1 Fire resistance tests for service installation - Part 4: Linear connection seals
TS 374 EN 60335-2-23 / A11 Safety regulations - For household electrical appliances - Part 2-23: Particular requirements for skin or hair care devices
TS EN 60335-2-52 / A11 Safety regulations - For household electrical appliances and similar - Part 2-52: Particular requirements for oral health devices
TS EN 421Protective gloves - Against ionizing radiation and radioactive contamination
TS EN 421Protective gloves - Against ionizing radiation and radioactive contamination
TS EN 50340 Hydraulic cable cutting devices - Devices used in electrical installations up to 30 kV A.A rated voltage
TS EN 1366-5 Fire resistance tests for service installations - Part 5: Service channels and gaps
TS EN 12254 Protective screens for laser workplaces - Safety rules and tests
TS EN 12254 Protective screens for laser workplaces - Safety rules and tests
TS EN 54-23 Fire detection and fire alarm systems - Part 23: Fire alarm devices- Video alarm devices
TS EN ISO 11161 / A1 Safety in machines - Integrated manufacturing systems - Basic rules
TS EN 60335-2-109 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-109: Particular requirements for water treatment devices with UV radiation
TS EN ISO 12402-5 / A1 Personal flotation equipment - Part 5: Seperation aids (performance level 50) - Safety regulations
TS EN 14605 + A1 Protective clothing - Against liquid chemicals - Wear liquid-proof (type 3) or spray-proof (type 4), including those that provide protection to only part of the body (type pb [3] and type pb [4]) Performance features for
TS EN ISO 14063 Environmental management - Environmental communication - Guidelines and examples
TS EN 3-8 Mobile fire extinguishers - Part 8: Additional requirements for the construction, resistance to pressure and mechanical tests of fire extinguishers with the maximum permissible pressure of 30 bar or lower, other than those specified in most 3-7
TS EN 3-8 / AC Portable fire extinguishers - Part 8: Additional rules other than those specified in most 30-3 for the construction, resistance to pressure and mechanical tests of fire extinguishers with the maximum permissible pressure equal to or lower than 7 bar.
TS EN 3-9 Portable fire extinguishers - Part 9: Additional requirements for resistance to pressure of CO2 fire extinguishers other than those specified in most 3-7
TS EN ISO 20344 Personal protective equipment - Test methods for footwear
TS EN 13034 + A1 Protective clothing against liquid chemicals - Performance rules for protective clothing with limited protection against liquid chemicals (type 6 and type pb [6] equipment)
TS EN 1827 + A1 Respiratory protection devices - Half masks with detachable filter without breathing valve for protection against gases or gases and particles or particles only - Features, tests, marking
TS EN 659 + A1 / AC Protective gloves for firefighters
TS EN 343 + A1 / AC Protective clothing - Rain protection
TS EN 136 / AC Respiratory protective devices -Full face masks -Features, tests, marking
TS EN 1634-3 / AC Fire resistance and smoke control tests - Openable windows and building hardware elements - Part 3: Smoke control test for doors and rolling shutters
TS EN ISO 1716 Fire reaction tests of building products - Determination of combustion temperature (calorific value)
TS EN 15725 Extended application reports on flame performance of building products and building elements
TS EN ISO 21258 Constant source emissions - Determination of mass concentration of dinitrogen monoxide (n2o) - Reference method: Non-dispersive infrared spectrometry method
TS EN 60335-2-109 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-109: Specification for water treatment devices with UV radiation
TS EN 50104 Electrical devices for the detection and measurement of oxygen - Performance rules and test methods
TS EN 530Wear resistance of protective clothing - Test methods
TS EN 1938 Personal eye protection - Glasses for motorcycle and moped users
TS EN 62508 Guidance on humanitarian aspects
TS EN 16027 Protective clothing - Protective gloves designed for football goalkeepers
TS EN 1996-1-2 / AC Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN ISO 13982-1 / A1 Protective clothing against solid particles - Part 1: Performance requirements for chemical protective clothing that protects the entire body against airborne solid particles (type 5 clothing)
TS EN 1911 Determination of the mass concentration of gaseous chlorides defined as constant source emissions - HCl - Standard reference method
TS EN ISO 25140 Constant source emissions - Automatic method for determination of methane concentration using flame ionization detector (FID)
TS EN 50131-5-3 / ISI Alarm systems - Anti-intrusion systems - Rules for interconnected equipment using radio frequency techniques - Sub clause Description of 5.1.6
TS EN 15767-3 Portable equipment for extending extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 3: Foam devices
TS EN 16081 + A1 Pressure Chambers - Special requirements for fire fighting systems - performance, application and testing
TS EN 1317-2 Road railing systems part 2: Efficiency classes, impact tests, absorption criteria and test methods for safety railing
TS EN 1317-3 Road holding systems - Part 3: Performance classes for crush buffers, acceptance criteria and test methods
TS EN 60695-1-30: 2008 Fire hazard tests - Part 1-30: manual for assessing the fire hazard of electrotechnical products - General guide
TS EN 61477 Working under voltage - Minimum requirements for the use of vehicles, devices and equipment
TS EN 894-4 Safety in machines - Ergonomic rules for the design of displays and control drives - Part 4: Arrangement and position of displays and control operators
TS EN 894-4 Safety in machines - Ergonomic rules for the design of displays and control drives - Part 4: Arrangement and position of displays and control operators
TS EN 60695-7-1 Fire hazard test - Part 7-1: Toxicity of products released by combustion - General guide
TS EN ISO 13943 Fire safety - Terms and definitions
Safety regulations - Electrical appliances for household and similar use - Part 2005-60335: Particular requirements for roasters, grills and similar portable cooking appliances
TS EN 54-17 Fire detection and fire alarm systems - part 17: Short circuit isolators
TS EN 54-18 Fire detection and fire alarm systems - part 18: I / O devices
TS EN 54-18 / AC Fire detection and fire alarm systems - Part 18: Input / output devices
TS EN 12816 LPG equipment and accessories - Portable and refillable LPG cylinders - Disposal
TS EN 13965-2 Waste characterization - Terms - Chapter 2: Management terminology and descriptions
TS EN 13772 Textile and textile products - Combustion properties - Curtains - Determination of flame spread when using large combustion welding in test pieces placed in vertical cone
TS EN 60335-2-14: 2006 / AC: 2007Security rules - For household electrical appliances - Part 2-14: Particular requirements for kitchen machines
TS EN 60335-2-13 / D1Security rules - For household and similar electrical appliances - Part 2-13: Particular requirements for deep-fat toasters, frying pans and similar appliances
TS EN 1627 Door sets for pedestrians, windows, curtain walls, balustrades and shutters - Burglar resistant - Rules and classification
TS EN 62115: 2007 / A2Electric toys - Safety
TS EN 15549 Air quality - Standard method for measuring the concentration of benzoapyrene in ambient air
TS EN ISO 16000-9 / AC Indoor air - Part 9: Determination of volatile organic compound emissions from construction materials and furnishing - Emission test chamber method
TS EN 547-1 + A1 Safety in machinery - Human body measurements - Part 1: Principles for determining the dimensions of the openings required for the entire body to reach the machines
TS EN 547-1 + A1 Safety in machinery - Human body measurements - Part 1: Principles for determining the dimensions of the openings required for the entire body to reach the machines
TS EN 14591-2 / AC Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water barriers
Explosion prevention and protection in underground mines - Protective systems - Section 14591: Automatic fire extinguishing systems for gallery opening machines
TS EN ISO 13732-1 Ergonomics of the thermal environment - Methods for evaluating human responses to contact with surfaces - Part 1: Hot surfaces
TS EN ISO 13753 Mechanical vibration and shock - Hand and arm vibration - Method for measuring the ability of flexible materials to transmit vibration transmitted to the body by the hand and arm system
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 20643Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS EN 62363 Radiation protection device - Portable photon contamination meters and imagers
TS EN 1089-3 Portable gas cylinders - Description of gas cylinders (excluding lpg) section 3: Color coding
TS EN ISO 14006: 2011 Environmental management systems-Guide to eco-design
TS EN 15254-4 + A1 Comprehensive application of results from fire resistance tests - Non-bearing walls - Part 4: Glazed structures
TS EN ISO 23611-1 Soil quality - Sampling from soil invertebrates - Part 1: Formalin extraction and manual separation of worms
TS EN ISO 23611-2 Soil quality- Sampling from soil invertebrates-Section 2: Extraction and sampling of micro-arthropath
TS EN ISO 23611-2 Soil quality- Sampling from soil invertebrates-Section 2: Extraction and sampling of micro-arthropath
TS EN ISO 23611-3 Soil quality- Sampling from soil invertebrates - Part 3: Soil extraction and sampling of enchytraeids
TS EN ISO 23611-3 Soil quality- Sampling from soil invertebrates - Part 3: Soil extraction and sampling of enchytraeids
TS EN 14034-1 + A1 Determination of burst characteristics of dust clouds - Part 1: Determination of maximum burst pressure (pmax) of dust clouds
TS EN 12561-3 Railway applications-Tank wagons- Part3. underfilling and discharging devices for liquefied gases under pressure
TS EN 12561-4 Railway applications - Tank wagons - Part 4: Top-mounted devices for top-loading and unloading of liquid products
TS EN 12561-7 Railway applications - Tank wagons - Part 7: Platforms and ladders
TS EN 12561-8 Railway applications-Tank wagons- Part 8: Heating connections
TS EN 14870-1 Oil and natural industries - Reducing brackets, fittings and flanges for pipeline distribution systems - Part 1: Reducing brackets
TS ISO 14240-2: 2001 / T1 (Number modification, TS EN ISO 14240-2) Soil quality- Determination of soil microbial biomass-Part 2: Smoke extraction method
TS EN ISO 14254 (Formerly: TS ISO 14254) Soil quality-Determination of exchangeable acidity in barium chloride extracts
TS EN ISO 15952 Soil quality - Effects of pollutants on juvenile land snakes (Helicidae) - Determination of the effects of soil contamination on growth
TS EN ISO 19011 Management systems audit guide (ISO 19011: 2011)
TS 18002 Occupational health and safety management systems - TS 18001 application guide
TS 10225 Fire prevention - Liquefied combustible gases
TS 10638 Fire prevention-Sulfur fires-Explosion type
TS 3840 General safety rules against work accidents in machines
TS EN 615 Fire protection - Fire extinguishing agents - Properties for powders (excluding class d powders)
TS EN 13501-3 + A1 Construction products and components - Fire classification - Part 3: Classification using data obtained from fire resistance tests on products and components used in building service installations: Fire resistant air ducts and fire dampers
TS EN 16082 Airport and aviation security services
TS EN ISO 26800 Ergonomics - General approach, principles and concepts
TS EN 54-17 Fire detection and fire alarm systems - part 17: Short circuit isolators
TS EN 54-18 Fire detection and fire alarm systems - part 18: I / O devices
TS EN 54-18 / AC Fire detection and fire alarm systems - Part 18: Input / output devices
TS EN 60335-1 Safety rules - For household and similar electrical appliances - Section 1: General rules
TS EN ISO 10523 Water quality - Determination of pH
TSE CEN / TS 15674 Air quality - Measurement of constant welding emissions - Guidance for detailing standardized methods
TS ISO 14066 Greenhouse gases - Competence requirements for validation kits and verification kits for greenhouse gases
TS EN 50131-2-2Alarm systems - Intrusion and panic alarm systems - Part 2-2: Intrusion sensors - Passive infrared sensors
TS EN 50131-2-3 Alarm systems - Intrusion and panic alarm systems - Part 2-3: Rules for microwave sensors
TS EN 50131-1: 2006 / IS2 Alarm systems - against intrusion - Part 1: General rules
TS EN 420 + A1 Protective gloves - General specifications and test methods
TS EN 50131-5-3 Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnection equipment using radio frequency techniques
TS EN 50131-6 Alarm systems - Intrusion and panic alarm systems- Part 6: Power supplies
TS EN 50131-5-3 / A1Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnection equipment using radio frequency techniques
TS EN 50545-1 Electrical equipment for the detection and measurement of toxic and flammable gases in car parks and tunnels-Part 1: General performance characteristics and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
TS EN 13231-3 Railway applications - Railway - Job acceptance - Part 3: Acceptance of re-profiling of rails on railway
tst EN ISO 9241-305 Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays
tst EN ISO 9241-307 Ergonomics of human-system interaction - Part 307: Analysis and conformity test methods for electronic visual displays
TS EN ISO 21258 Constant source emissions - Determination of mass concentration of dinitrogen monoxide (n2o) - Reference method: Non-dispersive infrared spectrometry method
TS EN 60335-2-109 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-109: Specification for water treatment devices with UV radiation
TS EN 50104 Electrical devices for the detection and measurement of oxygen - Performance rules and test methods
TS EN 530 Abrasion resistance of protective clothing materials - Test methods
TS EN 1938 Personal eye protection - Glasses for motorcycle and moped users
TS EN 1317-2 Road railing systems part 2: Efficiency classes, impact tests, absorption criteria and test methods for safety railing
TS EN 1317-3 Road holding systems - Part 3: Performance classes for crush buffers, acceptance criteria and test methods
TS EN 154 Workplace exposure - Terms and definitions
TSE ISO Guide 64 Guide to addressing environmental issues in product standards
TS EN 50131-2-5 Alarm systems - Intrusion and panic alarm systems - Part 2-5: Requirements for combined passive infrared and ultrasonic sensors
TS EN 50272-1 Safety regulations - Secondary accumulators and accumulator installations - Part 1: General safety information
TS EN 50131-2-6 Alarm systems - Intrusion and panic alarm systems - Part 2-6: Opening contacts (magnetic)
TS EN 50131-4 Alarm systems - Intrusion and panic alarm systems - Part 4: Warning devices
TS EN 50131-5-3 / IS1Alarm systems - intrusion systems - Part 5-3: requirements for interconnection equipment using radio frequency techniques
TS EN 50131-8 Alarm systems - Intrusion and panic alarm systems - Part 8: Safety devices / systems that generate fog
TS EN 13861 Safety in machinery - Guidance on the application of ergonomics standards in the design of machinery
TS EN 13861 Safety in machinery - Guidance on the application of ergonomics standards in the design of machinery
TS EN ISO 10882-1 Health and safety in welding and related processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
TS EN ISO 15011-5 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 5: Determination of thermal degradation during welding or cutting of organic material products in its composition using pyrolysis gas chromatography spectrometry
TS EN 60695-7-2 Fire hazard test - Part 7-2: Toxicity of combustion products-Summary and relevance of test methods
TS EN 60695-6-2 Fire hazard test - Part 6-1: Smoke obstruction of vision - Summary and relevance of test methods
TS EN 60674-3-1 / A1 Plastic films for electrical purposes - Part 3: Material specifications - Data sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
TS EN ISO 20345 Personal protective equipment - Safety footwear
TS EN 16027 Protective clothing - Protective gloves designed for football goalkeepers
TS EN ISO 20344 Personal protective equipment - Test methods for footwear
TS EN 50131-2-3 Alarm systems - Unauthorized access and containment systems - Part 2-3: Rules for microwave detectors
TS EN 50131-2-6 Alarm systems - Unauthorized entry and retention systems - Part 2-6: Opening contacts (magnetic)
TS EN 50131-8 Alarm systems - Intrusion and panic alarm systems - Part 8: Safety fog element / systems
TS EN 812Industrial headgear
TS EN ISO 20347 Personal protective equipment - Work footwear
TS EN 2824: 2011 (EN) Aerospace series- Combustion behavior of non-metallic materials under the influence of heat and flame emitting materials Determination of smoke density and gas components in materials smoke-Test equipment and environment
TS 7886 / T1 Water quality-Determination of orthophosphate-Tin II chloride method
TS 7886 / T1 Water quality-Determination of orthophosphate-Tin II chloride method
TS 4530 / T1 Water analysis methods - Lithium, sodium, potassium determination - Flame photometric, atomic absorption spectrophotometric and colorimetric analysis methods
TS 4530 / T1 Water analysis methods - Lithium, sodium, potassium determination - Flame photometric, atomic absorption spectrophotometric and colorimetric analysis methods
TS EN ISO 23161 Soil quality - Selection of organotin compounds
TS EN 60335-1 Safety rules - For household and similar electrical appliances - Section 1: General rules
TS EN ISO 8692 Water quality - Prevention of algae growth in freshwater using single-celled green algae
TS EN ISO 10304-1 / AC Water quality - Determination of dissolved ions by liquid ion chromatography - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
Water quality - Determination of specific alkylphenols - Part 18857: Gas chromatographic-Mass spectrometric determination of alkylphenols, ethoxylates and biphenol a in unfiltered samples after solid phase extraction and derivatization TS EN ISO 2-2
TS EN 894-4 Safety in machines - Ergonomic rules for the design of displays and control drives - Part 4: Arrangement and position of displays and control operators
TS EN 812 Anti-impact heads in industry
TS EN 1384 Protective caps - Equestrian
TS EN 1385 Helmets for canoeing and river sports
TS EN ISO 10523 Water quality-Ph determination
TS EN 13087-2 Protective helmets - Test methods - Part 2: Shock absorption
TS EN 13087-4 Protective helmets-Test methods-Section 4: Efficiency of the holding system
TS EN 13087-5 Protective helmets - Test methods - Part 5: Retention system strength
TS EN 13087-6 Protective helmets - Test methods - Part 6: Field of view
TS EN 13087-10 Protective helmets - Test methods - Part 10: Resistance to radiated heat
TS EN 13484 Helmets for ice skid users
TS EN 13541 Glass - Used in buildings - Safety glass systems - Bursting pressure test and classification
TS EN 13781 Protective helmets for snowmobile and snowmobile drivers and passengers
TSE CEN / TS 16178 Waste, treated bio waste and soil - Determination of pharmaceutical products
TS EN ISO 16265 Water quality - Methylene blue active substances (mbas) index - Method of using continuous flow analysis (cfa)
TS EN ISO 20347 Personal protective equipment - Work footwear
TS EN 50131-3 Alarm systems - Intrusion systems - Part 3: Monitoring and indicating equipment
TS EN 50131-5-3 / A1Alarm systems - Anti-intrusion systems - Rules for interconnected equipment using radio frequency techniques
60695-6-1: 2005 / A1 Fire hazard test - Part 6-1: Visibility blocking by smoke - General guide
TS EN 60695-2-12 Fire hazard test - Part 2-12: Test methods based on glow / hot wire - Method for flammability test with glow-wire for materials
TS EN 60695-2-13 Fire hazard test - Part 2-13: Test methods based on glow / hot wire - Flammability test method for glow-wire for materials
TS EN 60335-2-66: 2004 / A2 Safety rules - For electrical appliances used in households and similar places - Part 2.6: Particular requirements for ovens, stoves, ovens and the like
TS EN 1073-2 Radioactive contamination protective clothing - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate form radioactive contamination
TS EN 1073-2 Radioactive contamination protective clothing - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate form radioactive contamination
TS EN 136 / T1 Respiratory protection devices - Full face masks - Features, tests, marking
TS EN 13308 Tanks - For the transport of dangerous goods - Service equipment used in tanks - Unbalanced regulating valve
TS EN 13314 Tanks - For the transport of dangerous goods - Service equipment used in tanks - Filler hole cover
TS EN 13316 Tanks - For the transport of dangerous goods - Service equipment used in tanks - Pressure balanced regulating valve
TS EN 16192 Classification of wastes -Eluates analysis
TS EN 3844-2 Aerospace series - Flammability of non-metallic materials - Part 2: Horizontal, small combustion test, Determination of horizontal flame spread resistance
TS EN 60335-2-14: 2006 / A11 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-14: Particular requirements for kitchen machines
TS EN 60335-2-25 Safety rules - For household and similar electrical appliances - Part 2-25: Particular requirements for microwave ovens (including combined microwave ovens)
TS EN 60335-2-30: 2009 / A11 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-30: Particular requirements for room heaters
TS EN 54-25: 2008 / ACFire detection and fire alarm systems - Part 25: Components using radiolink
TS EN 1317-5 + A2 Road safety systems - Part 5: Product requirements and conformity assessment for vehicle safety systems
TS EN ISO 8253-3 Acoustics - Audiometric test methods - Part 3: Speech audio audiometry
TSE K 164 Disposable - Fire extinguisher with aerosol
TS EN 1317-5 + A2 Road safety systems - Part 5: Product requirements and conformity assessment for vehicle safety systems
TS EN 16039 Water quality - Guidance standard on the search for hydromorphological species of lakes
TS EN 15972 Water quality - Guidance on qualitative and quantitative research of marine phytoplantons
TS EN ISO 14051 Environmental management-Material flow expenditure account-General framework
TS EN 13071-3 Stationary waste bins with capacity up to 5000 1 with top lift and bottom discharge - Part 3: Recommended lifting connections
TS EN ISO 4007 Personal protective equipment - Eye and face protection - Glossary
TS 2005 EN 60335-2-9 / A13 / D1Security rules - For household electrical appliances - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
TS EN ISO 25762 Plastics - Guide to evaluating combustion performance and combustion properties of fiber-reinforced polymer composites
TS EN ISO 14045 Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines (ISO 14045: 2012)
TS EN ISO 14045 Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines (ISO 14045: 2012)
TS EN 15090 Footwear for firefighters
TS EN 397 + A1 Industrial safety helmets
TS EN ISO 22868 Forest and horticultural machinery - Noise test code for hand-held machines with internal combustion engines - engineering method (accuracy 2)
TS EN ISO 28803 Ergonomics of the physical environment - Application of international standards for people with special needs
TS EN 50136-1 Alarm systems - Alarm transmission systems and equipment - Part 1: General rules for alarm transmission systems
TS EN 136 / AC Respiratory protection devices - Full face masks - Features, tests, marking
TS EN ISO 12402-7 / A1 Personal flotation equipment - Part 7: Materials and components - Safety requirements and test methods
TS EN ISO 12402-8 / A1 Personal flotation equipment - Part 8: Accessories - Safety requirements and test methods
TS EN ISO 12402-9 / A1 Personal flotation equipment - Part 9: Test methods
TS EN ISO 1825 Rubber hoses and hose assemblies - Used for filling and discharging of fuel in the ground in aviation - Specifications
TS ISO 10390 Soil quality-Ph determination
TS ISO 10390 Soil quality-Ph determination
TS EN 50131-3 Alarm systems - Intrusion and panic alarm systems - part 3: Control and notification equipment
TS EN 50131-2-4 Alarm systems - Intrusion and panic alarm systems - part 2-4: Rules for combined passive infrared and microwave sensors
TS EN 1634-1 Fire resistance and smoke control tests for doors and rolling shutters, windows and elements of building hardware - Part 1: Fire resistance test for doors and rolling shutters and opening windows
TS EN 1634-2 Fire resistance and smoke control tests for doors, rolling shutters and window fittings and building hardware elements - Part 2: Test for characterizing fire resistance for building hardware elements
TS ISO 6851 Photography - Process wastes - Determination of total amino nitrogen - Microdiffusion kjeldahl method
TS EN 840-1 Mobile waste and recycling containers - Part 1: 400 wheeled containers up to 2 L for carded lift trucks - Dimensions and design
TS EN 840-2 Mobile waste and recycling containers - Part 2: 1300 wheeled containers with flat lid (s) for trunnion and / or dredger up to 4 L capacity - Dimensions and design
TS EN 840-3 Mobile waste and recycling containers - Part 3: 1300 wheeled containers with dome lid (s), capacity up to 4 L for trunnion and / or dredgers - Dimensions and design
TS EN 840-4 Mobile waste and recycling containers - Part 4: 1700 wheeled containers with flat lid / lids up to 4 L for wide trunnion or BG and / or large carded lift trucks - Dimensions and design
TS EN ISO 5667-13 Water quality - Sampling - Section 13: Sludge sampling guide
TS EN 13082 + A1 Tanks for transporting dangerous goods Service equipment used in tanks Vapor transmission valve
TS EN 12254 / AC Urban roads - Safety measures to be taken during construction and repair works on the road and roadside
TS EN 15649-3: 2009 + A1: 2012 Floating entertainment objects - For use on and in the water - Part 3: Additional special safety rules and test methods for class A installations
TS EN ISO 22867 Forest and garden machines - Vibration test code of hand-held internal combustion engine machines - Vibration in the stems
TS EN 50379-3 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances Part 3: Performance requirements for devices used in the illegal service of gas-fired heating appliances
TS EN 60695-7-3 Fire hazard test - Part 7-2: Toxicity of combustion products-Use and cycle of test methods
TS ISO 6853 Photography - Process wastes - Determination of ammonia nitrogen - Microdiffusion method
TS EN 1760-2 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principle for the design and testing of pressure-sensitive edges and pressure-sensitive rods
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
TSE CEN ISO / TR 11610 Protective clothing-Glossary
TS EN 12492 Mountaineering equipment - Climbing hoods - Safety rules and test methods
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
TS EN ISO 12846 Water quality - Determination of mercury - Method of using atomized absorption spectrometer (aas) with and without zengified
TS EN ISO 28802 Ergonomics of the physical environment - Environmental monitoring through environmental screening involving physical measurements of the environment and abstract responses of people
TS EN ISO 9241 Human ergonomics - System interaction - Part 143: Forms
TS EN ISO 13287 Personal protective equipment - Footwear - Test method for slip resistance
TS EN 62311 Evaluation of electronic and electrical equipment for human exposure to electromagnetic fields (0 hz - 300 ghz)
TS EN ISO 340 Conveyor belts - Flammability characteristics measured in laboratory - Properties and test method
TS EN 60335-2-109 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-109: Particular requirements for water treatment devices with UV radiation
TS EN ISO 12402-5 / A1 Personal flotation equipment - Part 5: Seperation aids (performance level 50) - Safety regulations
TS EN ISO 9241-303 Human-system interaction ergonomics - Part 303: Guidelines for electronic visual imaging
tst EN ISO 14116 / ACProtective clothing - Protection against heat and flame - Limited flame spreading materials, material equipment and clothing
TS ISO 14064-1: 2007 / T1 (Number amendment, TS EN ISO 14064-1) Greenhouse gases - Part 1: Guidelines and specifications for calculating and reporting greenhouse gas emissions and removals at enterprise level
Greenhouse gases - Part 14064: Guidelines and specifications for the calculation, monitoring and reporting activities of greenhouse gas emission reductions or removal enhancements TS ISO 2-2007: 1 / T14064
TS ISO 14064-3: 2007 / T1 (Number amendment, TS EN ISO 14064-3) Greenhouse gases - Part 3: Guidelines and specifications for the approval and verification of greenhouse gas declarations
TS EN ISO 20685 3 b screening methods for internationally compatible anthropometric databases "
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
TS EN 14491 Dust explosion - Protective release systems
TS EN ISO 20643 / A1 Mechanical vibration - Hand held and hand guided machines - Principles for the assessment of vibration emission
TS EN 60335-2-69 - Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
Safety regulations - For household and similar electrical appliances - Part 60335-2: Particular requirements for skin or hair care devices TS EN EN 23-2003-11: 2010 / A2
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for oral health care devices TS EN EN 52-2003-11: 2010 / A2
TS EN 60335-2-54 / A11 Safety regulations - For domestic and similar electrical appliances - Part 2-54: Particular requirements for surface cleaning devices using liquids or vapors for domestic use
TS 2005 EN 60335-2-9 / A13 / AC-2 Safety regulations - Electrical appliances for household and similar use - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for oral health care devices TS EN 52-11-2011 / A2
TS EN 60335-2-13 / A11 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-13: Particular requirements for deep-fat fryers, frying pans and similar appliances
TS EN 1621-1 Motorcycle Drivers Protective Clothing Against Mechanical Shock - Part 1: Specification and Test Methods for Impact Protectors
TS EN ISO 15027-1 Underwater suits - Part 1: Continuously worn clothes, including safety rules
TS EN ISO 15027-2 Underwater suits - Part 2: Separation suits, including safety rules
TS EN ISO 15027-3 Underwater clothes - Part 3: Test methods
TS EN 16252 Machines used for compaction of waste materials and recyclable parts - Horizontal baling presses - Safety rules
TS 13564Afficient Services - General purpose fluid systems and components instruments and devices - Air quality, BOD, organic compound, dust, etc. Measuring devices with flue gas, water / waste water, organic halogen etc. for analytical instruments - Rules
TS EN ISO 11885 / T1 Water quality - Determination of selected elements by inductively coupled plasma atomic emission spectrometer (ICP-OES)
TS EN 1846-2 + A1 Fire fighting and rescue service vehicles - Part 2: General rules - Safety and performance
TS 6550 EN 903 / T1 Water quality - Determination of anionic surfactants by measuring the methylene blue index (MBAS)
TS 6550 EN 903 / T1 Water quality - Determination of anionic surfactants by measuring the methylene blue index (MBAS)
TS EN 840-5 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
TS EN 840-6 Mobile waste and recycling containers - Part 6: Safety and health requirements
TS EN ISO 14403-1 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)
TS EN ISO 14403-2 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
tst EN 397 + A1 Safety helmets, industrial
TS EN 1127-1 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
TS EN 966 + A1 Headgear for air sports
TS EN 1078 + A1 Helmets for bicycle, skateboard and roller skate users
TS EN 13861 Machine safety - Guidance on the application of ergonomic standards in machine design
TS EN 13861 Machine safety - Guidance on the application of ergonomic standards in machine design
TS EN ISO 9241-410: 2008 / A1 Ergonomics of human - system interaction - Part 410: Design criteria for physical input devices
TS EN 1991-1-2: 2002 / AC European rule 1 - Design and impact principles of buildings - Part 1-2: Building effects - Effects on structures exposed to fire
TS EN 341 Personnel protection against falling from a height - Lowering devices for rescue
TS EN 60335-2-11 / A11 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-11: Particular requirements for drum dryers
TS EN 15269-2 Application of test results for openable window assemblies, fire resistance and / or smoke control including extended doors, shutters and building hardware elements - Part 2: fire resistance of hinged and pivoted steel door sets
TS EN 15254-7 Extended application of results from fire resistance tests - Non-load-bearing ceilings - Part 7: Metal sandwich panel construction
TS EN 16161 Water quality - Guidance for the use of adsorption techniques in living organisms for the prediction of chlorophyll-a concentration in marine and freshwater samples
TS EN 15934 Sludge, treated bio waste, soil and waste - Determination of dry matter content after determination of dry residue or water content
TS EN 15935 Determination of loss in sludge, treated bio waste, soil and waste - incineration
TS EN 15936 Determination of total organic carbon (TOC) by sludge, treated bio waste, soil and waste - dry combustion
TS EN ISO 16000-26 Sampling strategy for indoor air-carbon dioxide (CO2)
TS EN 16166 Waste, processed bio waste and soil- Adsorbable Determination of organic bound halogens (AOX)
TS EN 16166 Waste, processed bio waste and soil- Adsorbable Determination of organic bound halogens (AOX)
TS EN 16167 Waste, processed bio waste and soil - Determination of polychlorinated biphenyls (PCBs) by mass selective detection gas chromatography (GC-MS) and electron capture detection gas chromatography (GC-ECD)
TS EN 16167 Waste, processed bio waste and soil - Determination of polychlorinated biphenyls (PCBs) by mass selective detection gas chromatography (GC-MS) and electron capture detection gas chromatography (GC-ECD)
TS EN 16168 Total nitrogen determination by waste, treated bio waste and soil-dry combustion method
TS EN 16168 Total nitrogen determination by waste, treated bio waste and soil-dry combustion method
TS EN 16169 Waste, treated bio waste and soil - Determination of Kjeldahl nitrogen
TS EN 16169 Waste, treated bio waste and soil - Determination of Kjeldahl nitrogen
TS EN 16173 Waste, treated bio waste and soil - Nitric acid degradable soluble component elements
TS EN 16173 Waste, treated bio waste and soil - Nitric acid degradable soluble component elements
TS EN 16174 Waste, treated biowaste and soil-degradable parts in King water
TS EN 16174 Waste, treated biowaste and soil-degradable parts in King water
TS EN 16179 Waste, treated bio waste and soil - Guide for sample preparation
TS EN 16179 Waste, treated bio waste and soil - Guide for sample preparation
TS EN ISO 5667-3 Water quality - Sampling - Section 3: Guidelines for the storage, transport and storage of water samples
TS EN ISO 12782-2 Soil Quality- Geochemical modeling parameters of extraction and speciation of components in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithonite
TS EN ISO 12782-3 Soil Quality - Geochemical modeling parameters of extraction and speciation of soil and material components - Part 3: Extraction of oxalate / oxalic acid and aluminum oxides and hydroxides
TS EN 1317-5 + A2 / ACRoad safety systems - Part 5: Product requirements and conformity assessment for vehicle safety systems
TS ISO 2631-1 Mechanical vibration and shock - Assessment of exposure to whole-body vibration - Part 1: General rules
TS ISO 2631-2 Assessment of human exposure to whole-body vibration - Part 2: Continuous and impact-induced vibration in buildings (1 to 80 Hz)
TS EN ISO 5814 Water quality-Determination of dissolved oxygen-Electrochemical probe method
TS EN ISO 6341 Water quality-Determination of inhibition of mobility of Daphnia magna straus (cladocera, crustacea) - Acute toxicity test
TS EN ISO 14403-1 Water quality - Determination of total cyanide and free cyanide by continuous flow analysis 1:
TS EN ISO 14403-2 Water quality - Determination of total cyanide and free cyanide by continuous flow analysis 2:
TSE CEN ISO / TS 17892-9 Geotechnical surveys and tests - Soil laboratory tests - Part 9: Consolidated triaxial pressure tests on water-saturated soils
TS EN 50131-2-7-1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-1: Intrusion sensors - Glass breakage sensors (acoustic)
TS EN 50131-2-7-2 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
TS EN 50131-2-7-3 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for vacuum cleaners and vacuum cleaners
TS EN 50291-1 / A1 Household electrical appliances for the detection of carbon monoxide gas - Part 1: Test methods and performance characteristics
TS EN 60734 Electrical appliances - Performance - Hard water used in experiments
TS EN 62474 Declaration of materials used and produced in the electrotechnical industry
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN ISO 29462 Field tests of general ventilation filtration devices and systems on site with removal efficiency and resistance to air flow of particle size
TS EN ISO 10870 Water quality - Selection of sampling methods and devices for river bottom macroinvertebrates in freshwater
TS EN 14211 Ambient air quality - Standard method for the determination of nitrogen dioxide and nitrogen monoxide concentrations by chemical chemiluminescence
TS EN 14212 Ambient air quality - Standard measurement method for determination of sulfur dioxide concentration by ultraviolet fluorescence
TS EN 60900 Working under voltage - Power tools used for voltages up to 1000 v aa and 1500 v da
TS EN 1744-8 Tests for chemical properties of aggregates - Part 8: Sequencing test for the determination of the metal content of aggregates in the lower ash of the municipal waste incinerator (MIBA)
TS EN 14625 Ambient air quality - Standard method for the determination of carbon monoxide concentration by infrared spectroscopy without wavelength separation
TS EN 14626 Ambient air quality - Standard method for the determination of carbon monoxide concentration by infrared spectroscopy without wavelength separation
TS EN 15269-3 Extended application of test results for fire resistance and / or smoke control for doors, shutters and openable window components, including elements of building equipment - Part 3: Fire resistance of hinged or revolving wooden door sets and openable wooden frame windows
TS EN ISO 14644-9 Clean rooms and associated environments - Part 9: Classification of surface cleanliness by particle concentration
TS EN 15875 / AC Characterization of wastes - Static test for determination of neutralization potential and acid potential in sulphidic waste
TS EN 15933 Sludge, treated bio waste and soil - pH determination
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for washing machines
TS EN 60335-2-17 Safety rules - Part for household electrical appliances 2-17: Particular requirements for electric blankets, pillows and similar bendable heaters
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for vacuum cleaners and vacuum cleaners
TSE CEN / TS 16010 Plastics - Recycled plastics - Sampling procedure for testing plastic waste and recycling materials
TSE CEN / TS 16011 Plastics - Recycled plastics - Sample preparation
TS EN ISO 10930 Soil quality - Measurement of stability of soil aggregates exposed to water
TS EN ISO 11063 Soil quality - Direct extraction of DNA from soil samples
TS EN 60335-2-13 / A11 Safety regulations - For household and similar electrical appliances - Part 2-13: Particular requirements for deep-fat fryers, frying pans and similar appliances
TS EN ISO 12782-4 Soil Quality- Geochemical modeling parameters for extraction and speciation of components in soils and materials - Part 4: Extraction of humic substances from soil samples
TS EN ISO 12782-5 Soil Quality - Geochemical modeling parameters for extraction and speciation of soil and material components - Part 5: Extraction of humic substances from water samples
TS EN 840-1 Mobile waste containers - Part 1: Two-wheeled containers up to 400 liter capacity for carded vehicles - Sizes and design
TS EN 50132-5-1 / ACAlarm systems - CCTV systems for use in security applications - Part 5-1: Video transmission - General video transmission performance requirements
TS EN 50132-5-2 / ACAlarm systems - CCTV systems for use in security applications - Part 5-2: IP video transmission protocols
TS EN 840-2 Mobile waste containers - Part 2: Flat lid, four-wheeled containers up to 1300 liters for trunnion and / or dredgers
TS EN 795Fall protection against falling anchors
TS EN 840-3 Mobile waste bins - Part 3 - 1300 for trunnion and / or dredgers with dome lid, four-wheeled containers with capacity up to 1 liter - Dimensions and design
TS EN 840-4 Mobile waste containers - Part 4: Flat lid, four-wheeled containers up to 1700 liters for large trunnion or for boom and / or large dredgers
TS EN 840-5 Mobile waste containers - Part 5: Performance characteristics and test methods
TS EN 840-6 Mobile waste containers - Part 6: Health and safety regulations
TS EN ISO 7827 Water quality - Determination of "ready", "final" aerobic biodegradability of organic compounds in aqueous media - Dissolved organic carbon (DOC) analysis method
TS EN ISO 7827 Water quality - Determination of "ready", "final" aerobic biodegradability of organic compounds in aqueous media - Dissolved organic carbon (DOC) analysis method
TS EN ISO 11269-1 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for measuring inhibition of root growth
TS EN ISO 15549 Non-destructive testing - Eddy current inspection - General rules
TS EN ISO 12782-1 Soil Quality- Geochemical modeling parameters of extraction and speciation of components in soils and materials - Part 1: Extraction of asphoric iron oxides and hydroxides with ascorbic acid
TS EN ISO 13833 Constant source emissions - Determination of carbon dioxide content of biolute (biogenic) and fossil - Radiocarbon sampling and determination
TS ISO 6265 Alpine skis - Determination of strain and fracture load
TS EN ISO 14065 Greenhouse gases - Requirements for organizations validating and validating greenhouse gases for use in accreditation or other mutual recognition forms
TS EN 14701-2 Characterization of sludges - Draining properties - Part 2: Determination of draining resistance
S EN 60332-3-23 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flame spread of bundled wires or cables vertically mounted - Category b
TS EN 1621-4: 2013 Motorcycle riders will wear protective clothing against mechanical impact - Part 4: Inflatable Motorcycle Protectors - Requirements and Test Methods
TS EN 1080: 2013 Protective helmets - For young children - Shockproof
TS EN ISO 13849-2 Safety in machines - Safety-related components of control systems - Part 2- Verification
TS EN 14052 + A1 High performance industrial helmets
TS EN 397 + A1 Safety helmets, industrial
TS EN ISO 15535 General requirements for Antrometsis database preparation
TS EN 1365-1 Fire resistance tests - For structural members - Part 1: Walls
TS EN ISO 13199 Constant source emissions-Determination of total volatile organic matter (TVOCs) from waste gases from non-combustion processes-Infra-red analyzer equipped with catalytic converter
TS EN 16101 Water quality - Guideline for interlaboratory comparison studies for ecological assessments
TS EN 16260 Water quality - Remotely operated and / or withdrawn monitoring equipment for visual surveys to collect environmental data
TS EN ISO 14045 Environmental management - Product eco-efficiency assessment systems - Principles, rules and principles
TS EN ISO 14045 Environmental management - Product eco-efficiency assessment systems - Principles, rules and principles
TS EN 15875 Characterization of wastes - Static test for determination of neutralization potential and acid potential in sulphidic waste
TS EN ISO 7887 Water quality-Examination and determination of water color
TS EN ISO 13138 Air quality - Sampling procedures for airborne particles accumulated in the human respiratory system
TS EN 343 + A1 / ACProtective clothing - Protection against rain
TS 13557 Workplace - Requirements for waste accumulator recycling plants
TS EN 1621-1 Wear protective clothing for motorcycle riders - Part 1: Knee impact protectors for motorcycle riders - Specification and test methods
TS EN ISO 28927-12 Hand-held portable power tools - Test methods for the assessment of vibration emissions - Part 12: Tool grinding tools
TS EN 60695-11-3 Fire hazard test - Part 11-3: Test flames - 500 W flame - Equipment and verification test methods
TS EN 62115: 2005 / A11 Electric toys - Safety
9241-154 Human-system interaction Ergonomics - Part 154: Interactive voice response (IVR) applications
TS EN ISO 23611-5 Soil quality - Sampling from soil invertebrates - Part 5: Sampling and extraction of soil macro invertebrates
Explosion prevention and protection in underground mines - Protective systems - Section 14591: Passive water barriers
TS EN 14591-4 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic fire extinguishing systems for gallery opening machines
TS EN 13284-2 Constant source emissions - Determination of the low range mass concentration of powder - Part 2: Automatic measuring systems
tst ISO 10396 Constant source emissions - Sampling for automatic determination of gas concentrations
TS EN ISO 9241-302 Human-system interaction ergonomics - Part 302: Terminology for electronic visual displays
TS EN 1634-3 Fire resistance tests - Doors and shutters - part 3: Smoke control doors and shutters
TS EN 805 Water supply - Specification for outdoor components and systems
TS EN 50132-7 Alarm systems - CCTV monitoring systems for security applications - Part 7: Application guide
TS EN 60335-2-9: 2003 / A13: 2010Security rules - For household electrical appliances - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
TS EN 61230 Operating under stress - portable equipment for earthing or grounding and short-circuit
TS EN 12786: Safety in 2013 machines - Guidance on the design of vibration-related substances of safety standards
TS EN 62061: 2005 / A1: 2013 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
TS EN ISO 13856-1: Safety in machines - Pressure-sensitive protective devices - Part 2013: General principles for the design and testing of pressure-sensitive substrates and pressure-sensitive soles
TS EN ISO 13856-2: Safety in 2013 Machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods
TS EN 45545-1 Railway applications - Fire protection in railway vehicles - Part 1: General
TS EN 45545-3 Railway applications - Fire protection in railway vehicles - Part 3: Fire resistance requirements for fire barriers
TS EN 45545-4 Railway applications - Fire protection in railway vehicles - Part 4: meets fire safety requirements for the design of wagons
TS EN 45545-6 Railway applications - Fire protection in railway vehicles - Part 6: Fire control and management systems
TS EN 45545-7 Railway applications - Fire protection in railway vehicles - Part 7: meets fire safety requirements for flammable liquid and flammable gas installations
TS EN ISO 5659-2Plastics- Smoke formation- Part 2: Determination of optical density by single chamber experiment
TS EN ISO 13857 Safety in machines - Safety distances to prevent danger in areas where arms and legs are accessible
TS EN ISO 12100 Safety in machines - General principles for design - Risk assessment and mitigation (ISO 12100: 2010)
TS EN ISO 9241-171 Human - Ergonomics of system interaction - Part 171: Software access guide
TS EN ISO 28927-7 Hand-held portable power tools - Test methods for measuring vibration - Part 7: Sheet metal working and cutting tools
TS EN ISO 28927-5 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
TS EN 1319 Air heaters-Gas burners-Forced convexion-Used for heating the space in the houses -Net heat load 70 can not exceed kw-Burner with ventilator
TS EN 14605 + A1 Protective clothing - Against liquid chemicals - Wear liquid-proof (type 3) or spray-proof (type 4), including those that provide protection to only part of the body (type pb [3] and type pb [4]) Performance features for
TS EN ISO 14063 Environmental management - Environmental communication - Guidelines and examples
TS EN 54-23 Fire detection and fire alarm systems - Part 23: Fire alarm devices- Video alarm devices
TS EN 1078 + A1 Helmets for pedal bike, skateboard and roller skate users
TS EN 1621-2 Wear protective clothing for motorcycle riders - Part 2: Tread protectors for motorcycle riders - Specification and test methods
tst EN 1621-2 / AC (Available in German) Wear protective clothing for motorcyclists - Part 2: Tread protectors for motorcyclists - Features and test methods
TS EN 1621-4: 2013 Protective clothing for motorcycle riders against mechanical impact - Part 4: Inflatable protectors for motorcycle riders - Rules and test methods
TS EN ISO 16106 Packaging - Transport packages for dangerous goods - Dangerous goods packaging, medium bulk containers (IBCs) and large packages - Guidance on the implementation of ISO 9001
tst EN ISO 16495 Packaging - Transport packaging for dangerous goods - Test methods
TS EN ISO 13274 Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (ISO 13274: 2013)
TS EN 15343 Plastics - Recycled plastics - Plastic recycling traceability and conformity assessment and recycled content
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled materials from polyethylene (PE)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled materials from polypropylene (PP)
TS EN 15346 Plastics - Recycled plastics - Characterization of poly (vinylchloride) (PVC) recycled materials
TS EN 15347 Plastics - Recycled plastics - Characterization of plastic waste
TS EN 1080 Impact protection helmets for young children
TS EN 1846-1 Fire-fighting and rescue service vehicles - Part 1: Description and briefing
TS EN 1846-3Fire and rescue vehicles - Part 3: Permanently mounted equipment - Safety and performance
TS EN ISO 12846 Water quality - Determination of mercury - Atomic absorption spectrometry (AAS) method with and without enrichment (ISO 12846: 2012)
12566-3 + A2 50 Small wastewater treatment systems up to the equivalent population - Part 3: Ready-made and / or on-site domestic wastewater treatment plants10.11.2014
TS EN ISO 16072 Soil quality - Laboratory method for microbial soil respiration
TS EN ISO 16703 Determination of hydrocarbon content between soil quality-Gas chromatography and c10-C40
TS EN ISO 17402 Soil quality - Characteristics and guidelines for selection and application methods for the examination of the biocompatibility of soil and soil materials
TS EN ISO 22030 Soil quality- Biological methods-Chronic toxicity in higher plants
TS EN ISO 22892 Soil quality-Guidance for identification of target compounds by gas chomatography and mass spectrometry
TS EN ISO 25177 Soil quality - Field soil description
TS EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility Product family standard: Immune properties for components of components of fire burglar and general purpose alarm systems
TS EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility Product family standard: Immune properties for components of components of fire burglar and general purpose alarm systems
TS EN 50130-5 Alarm systems - Part 5: Environmental resistance test methods
TS EN 50130-5 Alarm systems - Part 5: Environmental resistance test methods
TS EN 16402 Paints and varnishes - Evaluation of material release from coatings exposed to indoor air - Sampling, conditioning and testing
TS EN 50355 Railway applications - Cables with special fire performance for towing and towing vehicles - Operating instructions
TS EN ISO 15791-1 Plastics - Development and implementation of medium-sized fire tests for plastic products - Part 1: Inbound guidance
TSE CEN / TS 16459 Fire resistance of roof and roof coverings - Extended application of test results in CEN / TS 118713.02.2014
TS EN 50292 Electrical devices for the determination of carbon monoxide in homes, caravans and boats - Guidance on the selection, installation, use and maintenance of equipment
TS EN 374-4 Protective gloves - Against chemicals and microorganisms - Part 4: Determination of resistance to degradation for chemical reasons
TS EN 926-2 Paragliding equipment - Paragliders - Part 2: Rules and flight tests
TS EN 12270 Mountaineering equipment - Wedges - Safety rules and test methods
TS EN 1846-2 + A1 Fire fighting and rescue service vehicles - Part 2: General rules - Safety and performance
TSE CEN / TS 16415 Drop-in personal protection equipment - Anchor devices - Recommendations for anchor devices intended for simultaneous use by multiple persons
TS EN ISO 20471: 2013 High visibility warning clothing - Test methods and features
TS EN 1365-1 / AC Fire resistance tests - For supporting elements - Part 1: Walls
TS EN 1047-2: 2009 + A1 Secure storage units- Classification and fire resistance test methods- Part 2: Data storage rooms and containers
TS EN 1047-2: 2009 + A1 Secure storage units- Classification and fire resistance test methods- Part 2: Data storage rooms and containers
TS EN 1143-1 Secure storage units - Rules for theft resistance, classification and test methods - Part 1: safes, ATM safes, vault doors and vault rooms
TS 10386 Workplaces - Rules for spring water filling plants
TS 13142 Authorized services - Requirements for flue gas desulfurization (SOx) systems
tst EN 50495: 2010Safety devices for safe operation of equipment against explosion risks
TS ISO 20121: 2012 Event sustainability management systems - Terms and conditions
TS ISO 20121 Event sustainability management systems - Terms and guidance
TS EN ISO 13856-3 Safety in machinery - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive buffers, plates, wires and similar devices
TSE CEN / TR 15120 Tanks for the transport of dangerous goods - Advice and guidance for loading, transport and unloading
TS EN ISO 17892-3 Geotechnical investigations and tests - Soil laboratory tests - Part 3: Determination of grain density
tst CEN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
TS EN ISO 12952-1 Combustion behavior of textile bedding - Part 1: Ignition source: Quenched cigarette
TSE CEN ISO / TS 17892-7 Geotechnical surveys and tests - Soil laboratory tests - Part 7: Uniaxial pressure test on fine-grained soils.
TS EN 60695-9-1 Fire hazard test - part 9-1: Spreading the flame on the surface - General guide
tst EN 13463-3: 2005Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection with flameproof housing "" d ""
TS EN 671-1 Fixed fire extinguishing systems - Hose systems - Part 1: Hose reels with semi-rigid hose
TS EN 671-2 Fixed fire extinguishing systems - Hose systems - Part 2: Hose systems with flat hose
TS EN 671-3 Fixed fire extinguishing systems - Hose systems - Part 3: Hose reels with semi-rigid hose and maintenance of flat hose systems
tst EN 13463-5: 2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Structural safety protection by "c"
TS EN 13463-6: 2005 Non-electrical equipment intended for use in a potentially explosive atmosphere - Part 5: Construction safety "Protection with" c ""
tst EN 13463-8: 2003 Non-electrical equipment for potentially explosive atmospheres - part 8: Liquid immersion protection with 'k' "
TS EN ISO 13274 Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (Medium Bulk Containers)
TS EN ISO 14031 Environmental management- Environmental performance assessment- Guidance
TS EN 15975-2 Drinking water supply safety - Risk and crisis management guidelines - Part 2: Risk management
TSE CEN / TR 16456 Characterization of sludges - Good practice in sludge dewatering
TS EN ISO 27108 Water quality - Determination of selected pesticides and biocide products - Gas chromatography - mass spectrometry (GC-MS) using solid-liquid microextraction (SPME) method
TS EN 16377 Waste characterization - Determination of brominate flame retardants (BFR) in solid waste
TS EN 13071-2 + A1 Stationary waste bins with capacity up to 5000 1 with top lift and bottom discharge - Part 2: Additional requirements for fully or partially underground systems
TS EN ISO 13137 Workplace air- Pumps for personal sampling of chemical and biological materials -Features and test methods
TSE CEN / TS 16181 Sludge, treated bio waste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
TSE CEN / TS 16201 Sludge, treated bio waste and soil - Determination of live plant seeds and propagates
TSE CEN / TS 16202 Sludge, treated bio waste and soil - Determination of foreign substances and stones
TSE CEN / TS 16202 Sludge, treated bio waste and soil - Determination of foreign substances and stones
TS EN ISO 28258 Soil quality - Digital exchange of soil-related data
TSE CEN / TS 16023 Characterization of wastes - Determination of gross thermal value and calculation of net thermal value
TS EN 13083 + A1 Tanks for transporting dangerous goods Service equipment used in tanks Vapor transmission valve
TS EN 14143 Respiratory equipment - Self-contained breathing apparatus
TS EN 60601-1-3 / A1 Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for radiation protection in the x-ray device for diagnostic purposes
TS EN ISO 4126-1 Safety devices for protection against overpressure - Part 1: Safety valves
TS EN ISO 4126-4 Safety devices for overpressure protection - Part 4: Pilot operated safety valves
TS EN ISO 4126-5 Safety devices for overpressure protection - Part 5: Controlled safety pressure relief systems (csprs)
TS EN ISO 4126-7 Safety devices for overpressure protection - Part: 7 joint data
TS EN 1866-3: 2013 Portable Fire Extinguishers - Part 3: Requirements for Bonding, Construction and Pressure Resistance of CO1866 Extinguishers that Comply with the Requirements of EN 1-2
TS EN 13381-4: 2013 Test method for the determination of the contribution of structural elements to fire resistance - Part 4: Passive protection applied to steel elements
TS EN 13381-8: 2013 Test method for the determination of the contribution of structural elements to fire resistance - Part 8: Reactive protection applied to steel elements
TS EN ISO 10819 Mechanical vibration and shock-Hand, arm vibration-Method for measuring and evaluating vibration from glove to hand
TS EN ISO 10819 Mechanical vibration and shock-Hand, arm vibration-Method for measuring and evaluating vibration from glove to hand
TS EN 1846-3: 2013 Fire-fighting and rescue vehicles - Part 3: Permanently mounted equipment - Safety and performance
TS EN ISO 9038: Determination of flammability
TS EN ISO 13688: Protective clothing - General specifications
TS EN 62542 Environmental standardization for electrical and electronic products and systems - Glossary of terms
TS EN ISO 1182 Response of building products to fire tests - Flammability test (ISO 1182: 2010)
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for vacuum cleaners and vacuum cleaners
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for vacuum cleaners and vacuum cleaners
TS EN 62040-4 Uninterruptible power systems (KGS) -Chapter 4: Environmental aspects-Rules and reporting
TS EN 60204-31 Safety in machinery - Electrical equipment in machinery - Part 31: Special safety and EMC specifications for sewing machines, sewing units and systems
TS EN 15882-1 Comprehensive application of results from fire resistance tests in service facilities - Part 1: Channels
TS EN 671-1 Fixed fire extinguishing systems - Hose systems - Part 1: Hose reels with semi-rigid hose
TS EN 671-2 Fixed fire extinguishing systems - Hose systems - Part 2: Hose systems with flat hose
TS EN 1143-1 Secure storage units - Rules for theft resistance, classification and test methods - Part 1: Safes, atm safes, vault doors and vault rooms
TS EN 61217 Radiotherapy equipment - Coordinates, motions and scales
TS EN 50134-3: 2012 (EN) Alarm systems- Social alarm systems- Part 3: Local units and controllers
TS EN 50518-1 Monitoring and alarm monitoring center - Part 1: Installation and construction features
TS EN 50518-2 Monitoring and alarm monitoring center - Part 2: Technical specifications
TS EN 50518-3 Monitoring and alarm monitoring center - Part 3: Operations and features for operation
TS EN ISO 16495 Packaging - Transport packaging for dangerous goods - Test methods
TSE CEN / TS 16516 Construction products - Assessment of the release of hazardous substances - Determination of indoor air emissions
TS EN 443 Protective caps for fire fighting in buildings and other structures
TS EN 511Gold protection gloves
TS EN 12094-7 Stationary fire extinguishing systems - Components of gas extinguishing systems - Part 7: Specification and test methods for sprayers in CO2 systems
TS EN 60695-11-10 Fire hazard test - Part 11-10: Test flames - Horizontal and vertical flame test methods of 50 w
TS EN 60335-2-7 / A11Security rules - For household and similar electrical appliances - Part 2-7: Particular requirements for washing machines
TS EN 60529 / A2 The degree of protection provided by enclosures (IP code)
TS EN 13277-3 Protective equipment for combat sports - Part 3: Additional features and test methods for body protectors
tst EN 14899 Identification of waste - Sampling from waste material - Framework for the preparation and implementation of a sampling plan
TS EN 60695-11-4 Fire hazard test - Part 11-4: Test flames -50 w flame -Hardware and verification test method
TS HD 60364-4-442 Electrical installation in buildings section 4: Protection for safety 44: Protection against overvoltages Protection of the low-voltage system against failures between high-voltage systems and earth
TS HD 60364-7-715 Electrical installation in buildings - Part 7-715: Requirements for special facilities and places - Very low feedback lighting installations
TS HD 60364-7-714 Low voltage electrical installations - Rules for special installations and places - Outdoor lighting installations
TS EN 14592: 2008 + A1Awood structures - Dowel fasteners - Requirements
TS EN 50379-2 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances part 2: Performance requirements for legal examinations and assessment devices
TS EN 50132-5-3 Alarm systems - CCTV surveillance systems for use in security applications - 5-3 part: Video transmission - Analog and digital video transmission
TS EN 50132-5-2 Alarm systems - CCTV systems for use in security applications - Part 5-2: IP video transmission protocols
TS EN 1363-1 Fire resistance tests - Part 1 - General rules
TS EN ISO 5923 Fire protection and extinguishing equipment - Extinguishing media - Carbon dioxide (ISO 5923: 2012)
TS EN 50132-5-1 Alarm systems - CCTV systems for use in security applications - Part 5-1: Video transmission - General video transmission performance requirements
TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3: 2009)
TS EN 13936 Workplace exposure - Procedures for the measurement of chemicals present as a mixture of airborne particles and vapors - Requirements and test methods
TS EN 15910 Water quality - Guide to estimating abundance of fish by mobile hydroacoustic methods
TS EN ISO 16387 Soil quality - Effects of pollutants on Enchytraeidae (Species of Enchytraeus) - Determination of effects on reproduction
TS EN ISO 11267 Soil quality - Prevention of collembola (folsamia candida) growth caused by soil pollutants
TS EN 16413 Ambient air quality - Biological monitoring with lichens - Evaluation of epiphytic lichen diversity
TS EN 16414 Ambient air quality - Bio-monitoring with algae - Accumulation of atmospheric pollutants from on-site algae collected for sample preparation
TS ISO 10396: 2007 Constant source emissions - Sampling for automatic determination of gas concentrations
TS EN 15889 Fire fighting hoses - Test methods
TS EN 1300 Safety storage units - Classification of high safety locks in terms of resistance to unauthorized opening
TS EN 15051-1 Workplace exposure - Measurement of dustiness of bulk material - Part 1: Requirements and selection of test methods
TS EN 15051-3 Workplace exposure - Measurement of dustiness of bulk material - Part 3: Continuous release method
TS EN 60335-2-25 Safety rules - For household and similar electrical appliances - Part 2-25: Particular requirements for microwave ovens (including combined microwave ovens)
TS EN 60695-2-12 Fire hazard test - Part 2-12: Test methods based on incandescent / hot wire - Incandescent flammability index (GWFI) test method for materials
TS EN 60695-7-3 Fire hazard test - Part 7-3: Toxicity of combustion products -Interpretation and use of test results (IEC 60695-7-3: 2011)
TS EN 60695-7-2 Fire hazard test - Part 7-2: Toxicity of combustion products-Summary and relevance of test methods
TS EN 61310-1 Safety in machines - Display, marking and actuating - Part 1: Rules for visible, audible and tactile signs
TS EN 61310-2 Safety on machines - Display, marking and actuating - Part 2: Marking-related features
TS EN 61310-3 Safety in machines - Display, marking and actuating - Part 3: Rules for the installation and operation of actuating mechanisms
TS EN 12786 Safety in machines - Requirements for the preparation of vibration-related substances of safety standards
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 16101 Packaging - Transport packaging of dangerous goods - Plastic compatibility tests
TS EN 13823 + A1 Fire reaction tests for construction products - Construction products other than floors exposed to thermal effects with a single combustion element
TSE CEN / CLC / ETSI EN 101551 Rules on the use of appropriate accessibility award criteria in public procurement of ICT products and services in Europe
101550 EN 301 549 Documents on "Accessibility requirements appropriate for public procurement of ICT products and services in Europe" TSE CEN / CLC / ETSI
TS EN ISO 17994 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two numerical methods
TS EN ISO 10693 Soil quality - Determination of carbonate content - Volumetric method
TS EN ISO 11272 Soil quality-Determination of dry bulk density
TS EN ISO 11274 Soil quality - Determination of water retention - Laboratory methods
TS EN ISO 11275 Soil quality - Determination of unsaturated hydraulic conductivity and water retention - Wind evaporation method
TS EN ISO 11276 Soil quality - Determination of pore water pressure - Tensiometry method
TS EN ISO 11461 Soil quality - Determination of soil water content as volume fraction using core arms - Gravimetric method
TS EN 13946 Water quality - Guidelines for routine sampling and preparation of benthic diatoms from rivers and lakes
TS EN 14184 Water quality - Guidelines for the investigation of aquatic macrophytes in rivers
TS EN 14407 Water quality - Guidelines for the identification and counting of benthic samples with two atoms from rivers and lakes
TS EN 16457 Characterization of wastes - Framework for the preparation and implementation of an experimental program - Objectives, planning and reporting
TS EN ISO 18772 Soil quality - Extraction procedures guide for chemical and ecotoxicological testing of subsequent soil and soil materials
TS EN 62676-2-3 Video surveillance systems for security applications - Part 2-2: Video transmission protocols-HTTP and REST-based IP interoperability
TS EN 62676-2-2 Video surveillance systems for security applications - Part 2-2: Video transmission protocols-HTTP and REST-based IP interoperability application
TS EN 62676-2-1 Video surveillance systems for security applications - Part 2-1: Video transmission protocols-General rules
TS EN 62676-1-2 Video surveillance systems for security applications - Part 1-2: System requirements - Performance rules for image transmission
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
TS EN 1634-1 Fire resistance tests-Doors and shutters-Part 1: Fire doors and shutters
TS EN ISO 16911-1 Constant welding emissions - Manual and automatic determination of speed and flow in ducts - Part 1: Manual reference method
TS EN ISO 16911-2 Constant welding emissions - Manual and automatic determination of speed and flow in ducts - Part 2: Automatic measuring systems
TS EN ISO 10710 Water quality – Growth retardation test with macro algae Ceramium tenuicorne in sea water and slightly salty waters
TS EN 1300 Safety storage units - Classification of high safety locks in terms of resistance to unauthorized opening
TS EN 15051-1 Workplace exposure - Measurement of dustiness of bulk material - Part 1: Requirements and selection of test methods
TS EN 15051-3 Workplace exposure - Measurement of dustiness of bulk material - Part 3: Continuous release method
TS EN 60335-2-25 Safety rules - For household and similar electrical appliances - Part 2-25: Particular requirements for microwave ovens (including combined microwave ovens)
TS EN 60695-2-12 Fire hazard test - Part 2-12: Test methods based on incandescent / hot wire - Incandescent flammability index (GWFI) test method for materials
TS EN 60695-7-3 Fire hazard test - Part 7-3: Toxicity of combustion products -Interpretation and use of test results (IEC 60695-7-3: 2011)
TS EN 60695-7-2 Fire hazard test - Part 7-2: Toxicity of combustion products-Summary and relevance of test methods
TS EN 61310-1 Safety in machines - Display, marking and actuating - Part 1: Rules for visible, audible and tactile signs
TS EN 61310-2 Safety on machines - Display, marking and actuating - Part 2: Marking-related features
TS EN 61310-3 Safety in machines - Display, marking and actuating - Part 3: Rules for the installation and operation of actuating mechanisms
TS EN 12786 Safety in machines - Requirements for the preparation of vibration-related substances of safety standards
TS EN ISO 14738Machine safety - Anthropometric requirements for the design of workplaces in machines
TS EN 420 + A1 Protective gloves - General specifications and test methods
TS EN 397 + A1 Industrial safety helmets
TS EN ISO 22868 Forest and horticultural machinery - Noise test code for hand-held machines with internal combustion engines - engineering method (accuracy 2)
TS EN ISO 28803 Ergonomics of the physical environment - Application of international standards for people with special needs
TS EN 50136-1 Alarm systems - Alarm transmission systems and equipment - Part 1: General rules for alarm transmission systems
TS ISO 10396: 2007 Constant source emissions - Sampling for automatic determination of gas concentrations
TS EN 15889 Fire fighting hoses - Test methods
TS EN 60335-2-9: 2003 / A13: 2010Security rules - For household electrical appliances - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
TS EN 61511-2 Functional safety - Safety instrumented systems for the process industry - Part 2: Guidelines for the implementation of IEC 61511-1
TS EN 60900 Working under voltage - Power tools used for voltages up to 1000 V aa and 1500 V da
S ISO 8178-1 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Measurement of gases and particles in exhaust emissions in the engine dynamometer
TS EN ISO 1825 Rubber hoses and hose assemblies - Used for filling and discharging of fuel in the ground in aviation - Specifications
TS ISO 6853 Photography - Process wastes - Determination of ammonia nitrogen - Microdiffusion method
TS EN 1760-2 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principle for the design and testing of pressure-sensitive edges and pressure-sensitive rods
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
TSE CEN ISO / TR 11610 Protective clothing-Glossary
TS EN 12492 Mountaineering equipment - Climbing hoods - Safety rules and test methods
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
TS EN ISO 12846 Water quality - Determination of mercury - Method of using atomized absorption spectrometer (aas) with and without zengified
TS EN ISO 28802 Ergonomics of the physical environment - Environmental monitoring through environmental screening involving physical measurements of the environment and abstract responses of people
TS EN ISO 9241 Human ergonomics - System interaction - Part 143: Forms
TS EN ISO 13857 Safety in machines - Safety distances to prevent danger in areas where arms and legs are accessible
TS EN ISO 12100 Safety in machines - General principles for design - Risk assessment and mitigation (ISO 12100: 2010)
TS EN ISO 9241-171 Human - Ergonomics of system interaction - Part 171: Software access guide
TS EN 671-1 Fixed fire extinguishing systems - Hose systems - Part 1: Hose reels with semi-rigid hose
TS EN 671-2 Fixed fire extinguishing systems - Hose systems - Part 2: Hose systems with flat hose
TS EN 671-3 Fixed fire extinguishing systems - Hose systems - Part 3: Hose reels with semi-rigid hose and maintenance of flat hose systems
TS EN 15208 Operating principles and connection characteristics of tanks for the transport of dangerous goods
TS EN 16522 Service equipment for tanks - Ventilation equipment for tanks for the transport of dangerous goods Flame arresters
TS EN ISO 20471: 2013 High visibility warning clothing - Test methods and features
TS EN 1365-1 / AC Fire resistance tests - For supporting elements - Part 1: Walls
TS EN 1047-2: 2009 + A1 Secure storage units- Classification and fire resistance test methods- Part 2: Data storage rooms and containers
TS EN 1047-2: 2009 + A1 Secure storage units- Classification and fire resistance test methods- Part 2: Data storage rooms and containers
TS EN 15041 Chemicals for the treatment of drinking and utility water - Anticorrosive substances for membranes - Polyphosphates
TS EN 15040 Chemical substances used in the treatment of drinking and utility water - Anticorrosive substances for membranes - Phosphonic acids and their salts
TS EN 1197 Chemicals for drinking and potable water treatment - Monochrome phosphate solution
TS EN 60695-11-2 Fire hazard test - Part 11-2: Test flames - Strong pre-mixed flame rated 1 kw - Instruments, confirmatory test device and guide
TS EN 16327 Fire fighting - Positive pressure proportioning systems (PBOS) and compressed air foam systems (SHKS)
TS EN 15144 Winter Care Equipment - Terms and Definitions - Terms for partial care
TSE ISO / TS 11602-2 Fire protection - Portable and mobile fire extinguishers - Part 2: Inspection and maintenance
tst ISO 13851 Two-hand control devices - - Machine Safety functional aspects and design principles
tst ISO 13854 Safety in Machines - Minimal gaps to prevent crushing of human body parts
TS ISO 14118 Safety on Machines - Prevention of unexpected start-ups
TS EN ISO 14120 Safety in Machinery - Guards - General requirements for design and construction of fixed and movable guards
TS EN 614-1 + A1 Safety in machines - Ergonomic design principles - Part 1: Terminology and general principles
TS EN 614-1 + A1 Safety in machines - Ergonomic design principles - Part 1: Terminology and general principles
tst EN ISO 14119 Safety on machines - Interlocking devices with guards - Principles for design and selection
tst EN ISO 13856-1 Safety in machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive substrates and pressure-sensitive soles
tst EN ISO 13856-2 Safety in machines - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods
TS EN ISO 16387 Soil quality - Effects of pollutants on Enchytraeidae (Species of Enchytraeus) - Determination of effects on reproduction
TS EN ISO 11267 Soil quality - Prevention of collembola (folsamia candida) growth caused by soil pollutants
TS EN 16413 Ambient air quality - Biological monitoring with lichens - Evaluation of epiphytic lichen diversity
TS EN 16414 Ambient air quality - Bio-monitoring with algae - Accumulation of atmospheric pollutants from on-site algae collected for sample preparation
TS EN ISO 17994 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two numerical methods
TS EN ISO 10693 Soil quality - Determination of carbonate content - Volumetric method
TS EN ISO 11272 Soil quality-Determination of dry bulk density
TS EN ISO 11274 Soil quality - Determination of water retention - Laboratory methods
TS EN ISO 11275 Soil quality - Determination of unsaturated hydraulic conductivity and water retention - Wind evaporation method
TS EN ISO 11276 Soil quality - Determination of pore water pressure - Tensiometry method
TS EN ISO 11461 Soil quality - Determination of soil water content as volume fraction using core arms - Gravimetric method
TS EN 13946 Water quality - Guidelines for routine sampling and preparation of benthic diatoms from rivers and lakes
TS EN 14184 Water quality - Guidelines for the investigation of aquatic macrophytes in rivers
TS EN 14407 Water quality - Guidelines for the identification and counting of benthic samples with two atoms from rivers and lakes
TS EN 16457 Characterization of wastes - Framework for the preparation and implementation of an experimental program - Objectives, planning and reporting
TS EN ISO 18772 Soil quality - Extraction procedures guide for chemical and ecotoxicological testing of subsequent soil and soil materials
TS EN 62676-2-3 Video surveillance systems for security applications - Part 2-2: Video transmission protocols-HTTP and REST-based IP interoperability
TS EN 62676-2-2 Video surveillance systems for security applications - Part 2-2: Video transmission protocols-HTTP and REST-based IP interoperability application
TS EN 62676-2-1 Video surveillance systems for security applications - Part 2-1: Video transmission protocols-General rules
TS EN 62676-1-2 Video surveillance systems for security applications - Part 1-2: System requirements - Performance rules for image transmission
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
TS EN 805 Water supply - Specification for outdoor components and systems
TS EN 50132-7 Alarm systems - CCTV monitoring systems for security applications - Part 7: Application guide
tst EN 421Protective gloves - Against ionizing radiation and radioactive contamination
tst EN 421Protective gloves - Against ionizing radiation and radioactive contamination
tst EN 421 Protective gloves - Against ionizing radiation and radioactive contamination
tst 11922Fire prevention - Outdoor and indoor parking lots - General
tst EN 482 + A1 Workplace air - General rules for the performance of chemical processes
TS EN ISO 9612 Acoustics - Determination of exposure to noise in the working environment - Engineering method
tst EN 1076 Workplace air-Pumped sorbent tubes for the determination of gases and vapors-Features and test methods
tst EN 838 Workplace air- Diffusion sampling devices for the determination of gases and vapors- Properties and test methods
TS ISO 2631-2 Mechanical vibration and impact - Assessment of human body exposure to vibration - Part 2: Vibration in buildings (1 Hz to 80 Hz)
TS 2005 EN 60335-2-9 / A13 / AC-1Security rules - Household electrical appliances - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
TSE ISO / TS 14067: 2013 / T1 (Number Amendment TSE CEN ISO / TS 14067) Greenhouse gases - Carbon footprint of products - Requirements and guidance for calculation and notification (ISO / TS 14067: 2013)
ISO EN ISO 4869-3 Acoustics - Ear protectors - Part 3: Measurement of loss of insertion of cuff-type ear protectors using an acoustic test device (ISO 4869-3: 2007)
TSE ISO Guide 64 Guide to addressing environmental issues in product standards
TS ISO 14066 Greenhouse gases - Qualification specifications for greenhouse gas validation kits and verification kits
TS ISO 14066 Greenhouse gases - Qualification specifications for greenhouse gas validation kits and verification kits
TS EN ISO 12010 Water quality - Determination of short chain polychlorinated paraffins (PKPs) in water - Gas chromatography-mass spectrometry (GC-MS) and negative ion chemical ionization (NCI) method
TS EN 14212 / AC Ambient air - Standard method for measuring sulfur dioxide concentration by ultraviolet fluorescence
TS EN 16323 Glossary of wastewater engineering terms
TS EN ISO 4126-6 Safety devices for protection against overpressure - Part 6: Application selection and installation of safety devices with explosion discs (ISO 4126-2: 2003)
TS EN 14458 Personal eye protection - Face and eye visors for the use of firefighters and high-performance industrial safety helmets used by firefighters, ambulances and emergency personnel
TS EN 14058 Protective clothing - Clothing for protection against cold conditions
TS EN 60601-1-3 / A1 / AC Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for radiation protection in the x-ray device for diagnostic purposes
TSE CEN / TS 16645 Ambient air - Benz [a] anthracene, benzo [b] fluoranthene, benzo [j] fluoranthene, benzo [k] fluoranthene, dibenz [a, h] anthracene, indeno [1,2,3-cd] pyrene and benzo [ ghi] method for measuring perylene
TS EN 12341 Ambient air - Standard gravimetric measurement method for the determination of PM10 or PM2,5 mass concentrations of suspended particulate matter
TS EN ISO 17184 Soil quality - Determination of carbon and nitrogen by near infrared spectrometry (NIRS)
TS EN 13205-1 Workplace exposure - Assessment of the sampler's performance for measuring airborne particle concentrations - Part 1: General requirements
TS EN 13205-2 Workplace exposure - Evaluation of the sampler's performance for measuring airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
TSE CEN / TR 13205-3In-workplace exposure - Evaluation of the sampler's performance to measure airborne particle concentrations - Part 3: Analysis of sampling efficiency data
TS EN 13205-4 Workplace exposure - Evaluation of the sampler's performance to measure airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
TS EN 13205-5 Workplace exposure - Evaluation of the sampler's performance for measuring airborne particle concentrations - Part 5: Aeresol sampler performance test and comparison of the sampler in the workplace
TS EN 13205-6 Workplace exposure - Evaluation of the sampler's performance for measuring airborne particle concentrations - Part 6: Transport and handling tests
TS EN 12873-1 Effect of materials on drinking and potable water - Impact due to migration - Part 1: Test method for factory made products made of organic or glassy (porcelain / vitreous enamel) materials or combined
TS EN ISO 5923 Fire protection and extinguishing equipment - Extinguishing media - Carbon dioxide (ISO 5923: 2012)
TS EN 50132-5-1 Alarm systems - CCTV systems for use in security applications - Part 5-1: Video transmission - General video transmission performance requirements
TS EN 1078 + A1 Helmets for pedal bike, skateboard and roller skate users
TS EN 3-8 Mobile fire extinguishers - Part 8: Additional requirements for the construction, resistance to pressure and mechanical tests of fire extinguishers with the maximum permissible pressure of 30 bar or lower, other than those specified in most 3-7
TS EN 13083 + A1 Tanks for transporting dangerous goods Service equipment used in tanks Vapor transmission valve
TS EN 14143 Respiratory equipment - Self-contained breathing apparatus
TS EN 60601-1-3 / A1 Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for radiation protection in the x-ray device for diagnostic purposes
TS EN ISO 4126-1 Safety devices for protection against overpressure - Part 1: Safety valves
TS EN ISO 4126-4 Safety devices for overpressure protection - Part 4: Pilot operated safety valves
TS EN ISO 4126-5 Safety devices for overpressure protection - Part 5: Controlled safety pressure relief systems (csprs)
TS EN ISO 4126-7 Safety devices for overpressure protection - Part: 7 joint data
TS EN 1866-3: 2013 Portable Fire Extinguishers - Part 3: Requirements for Bonding, Construction and Pressure Resistance of CO1866 Extinguishers that Comply with the Requirements of EN 1-2
TS EN 13381-4: 2013 Test method for the determination of the contribution of structural elements to fire resistance - Part 4: Passive protection applied to steel elements
TS EN 13381-8: 2013 Test method for the determination of the contribution of structural elements to fire resistance - Part 8: Reactive protection applied to steel elements
TS EN ISO 10819 Mechanical vibration and shock-Hand, arm vibration-Method for measuring and evaluating vibration from glove to hand
TS EN ISO 10819 Mechanical vibration and shock-Hand, arm vibration-Method for measuring and evaluating vibration from glove to hand
TS EN 1846-3: 2013 Fire-fighting and rescue vehicles - Part 3: Permanently mounted equipment - Safety and performance
TS EN ISO 9038: 2013 Liquids-Determination of burnability
TS EN ISO 13688: Protective clothing - General specifications
TS ISO 8178-5 Internal combustion engines - Exhaust emission measurement part 5: Test fuels
TS EN 1078 + A1 Helmets for bicycle, skateboard and roller skate users
TS EN 1143-1 Secure storage units - Rules for theft resistance, classification and test methods - Part 1: safes, ATM safes, vault doors and vault rooms
tst EN 50495: 2010 Safety devices for safe operation of equipment against explosion risks
TS ISO 20121: 2012 Event sustainability management systems - Terms and conditions
TS ISO 20121 Event sustainability management systems - Terms and guidance
TS EN ISO 13856-3 Safety in machines - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive buffers, plates, wires and similar devices
TSE CEN / TR 15120 Tanks for the transport of dangerous goods - Advice and guidance for loading, transport and unloading
TS EN ISO 17892-3 Geotechnical investigations and tests - Soil laboratory tests - Part 3: Determination of grain density
tst CEN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
TS EN ISO 12952-1 Combustion behavior of textile bedding - Part 1: Ignition source: Quenched cigarette
TSE CEN ISO / TS 17892-7 Geotechnical surveys and tests - Soil laboratory tests - Part 7: Uniaxial pressure test on fine-grained soils.
TS EN 60695-9-1 Fire hazard test - part 9-1: Spreading the flame on the surface - General guide
tst EN 13463-3: 2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Flameproof housing "" d "" protection "
tst EN 13463-2: 2004 Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection with flow restriction housing "fr"
TS EN 60335-2-16 / A1Security rules - For household electrical appliances - Part 2-16: Particular requirements for food waste disposers
TS EN ISO 13688 Protective clothing - General specifications
TS EN 50130-4 / A1 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity rules for components of fire, intrusion, panic alarm, CCTV, access control and social alarm systems
TS EN ISO 13274 / AC Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (Medium Bulk Containers)
TS EN 16334 Railway applications - Passenger alarm systems - System requirements
TS EN 16350: 2014 Protective gloves - Electrostatic properties
TS EN 250: 2014 Respiratory equipment - Self-contained open-circuit compressed air plunger - Features, tests, marking
TS EN 54-3: 2014 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Audio devices
TS EN 694: 2014 Fire fighting hoses - Semi-rigid hoses - For stationary systems
TS EN 1947: 2014 Fire fighting hoses - Semi-rigid distribution hoses and hose assemblies for pumps and vehicles
TS EN 14540: 2014 Fire extinguisher hoses - Non-permeable flat hoses for stationary systems
Explosive atmospheres - Explosion prevention and protection - chapter 1127: Basic concepts and methodology in mining
TS EN 16350 Protective gloves - Electrostatic properties
Construction and excavation machinery - Laboratory assessment of operator seat vibration (ISO 7096: 2008) TS EN ISO 2009: 7096 / AC: 2000
TS EN ISO 7096 Construction and excavation machinery - Laboratory evaluation of operator seat vibration (ISO 7096: 2000)
TS EN ISO 20346 Personal protective equipment - Protective footwear
TS EN 1866-2: 2014 Portable fire extinguishers - Part 2: Requirements for building, pressure resistance and mechanical tests for fire extinguishers with maximum permissible pressure of 1866 bar or less in accordance with the regulations of EN 1-30
TS EN 1021-1 Furniture - Evaluation of the flammability of upholstered furniture - Part 1: Combustion source internal combustion cigarette
TS EN 1021-2 Furniture - Evaluation of the flammability of upholstered furniture - Part 2: Equivalent to the flame match of the combustion source
TS EN 60335-2-27 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-27: Particular requirements for devices with ultraviolet and infrared radiation effect on the skin
TS EN 61496-1 Safety on machinery - Electrically sensitive protection equipment - Part 1: General rules and tests
TS EN 50136-2 Alarm systems - Alarm transmission systems and equipment - Section 2: Guidelines for transceivers used in supervised facilities
TS EN 50136-3 Alarm systems - Alarm transmission systems and equipment - Part 3: Rules for transceivers used in the reception center
tst EN ISO 16017-2 Indoor, ambient and workplace air - Sampling and analysis of volatile compounds by absorbent tube / thermal desorption / capillary gas chromatography-Part2: Diffusive sampling (ISO 16017-2: 2003)
tst EN ISO 28439 Workplace air - Characteristics of ultra fine aerosol / non-aerosol - Determination of numerical concentration and particle distribution using differential electrical mobility analysis systems (ISO 28439: 2011)
tst EN 13936 Workplace exposure - Procedures for the measurement of chemicals present as a mixture of airborne particles and vapors - Requirements and test methods
tst EN ISO 13137 Workplace air- Pumps for personal sampling of chemical and biological materials -Features and test methods (ISO 13137: 2013)
TS EN 13890 Workplace exposure - Processes for the measurement of metals and semi-metals in airborne particles - Requirements and test methods
tst EN 14031 Workplace air - Determination of endotoxins in the air
tst EN 14042 Workplace air - Guidelines for the application and use procedure for the assessment of the effects of chemical and biological substances
tst EN 14530 Workplace air - Determination of diesel particles - General rules
tst EN 16253 Air quality - Near-surface atmospheric measurements by differential optical absorption spectroscopy (DOAS) - Ambient air and diffuse emission measurements
tst EN 15549 Air quality - standard method for measuring the concentration of benzoapyrene in ambient air
tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Sampling for emission rate determination and smoke particle analysis (ISO 15011-1: 2009)
EN ISO 15011-2 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 2: Carbon monoxide (CO), carbon dioxide (CO2) nitrogen monoxide (CO2) during arc welding, cutting and gouging Determination of emission rates of (NO) and nitrogen dioxide (NO15011) (ISO 2-2009: XNUMX)
TS EN 16081 + A1 Pressure Chambers - Special requirements for fire fighting systems - performance, application and testing
TS EN ISO 24501 Ergonomics - Accessible design - Characteristics of age-related lighting contrast for colored light
TS EN ISO 12312-1 Eye and Face Protection-Sunglasses and similar eye products-Part 1: Sunglasses for general use
TS EN ISO 12312-1 Eye and face protection - Sunglasses and similar glasses - Part 1: Sunglasses for general use (ISO 12312-1: 2013)
TS EN 374-4 Protective gloves against chemicals and microorganisms - Part 4: Determination of resistance to degradation with chemicals
TS EN 62321-3-1 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Determination of lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
TSE CEN ISO / TR 7250-2 Human body basic measurements for technological design - Part 2: Statistical summary of body measurements from ISO member population (ISO / TR 7250-2: 2010)
TS EN 71-2 + A1 Toy safety - Part 2: Flammability
TS EN 13205-1 Workplace air exposure - Assessment of the performance of the sampling device for measuring airborne particle concentrations - Part 1: General requirements
TS EN 13205-2 Workplace air exposure - Evaluation of the sampling device performance for measuring airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
TS EN 13205-4 Workplace air exposure - Evaluation of the sampling device performance for measuring airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
TS EN 13205-5 Workplace air exposure - Evaluation of the sampling device performance for measuring airborne particle concentrations - Part 5: Performance test of aerosol sampling device and comparison of the sampling device at the workplace
TS EN 13205-6 Workplace air exposure - Evaluation of the performance of the sampling device for measuring airborne particle concentrations - Part 6: Transport and handling tests
TS EN 14212 Ambient air - Standard method for measuring sulfur dioxide concentration by ultraviolet fluorescence
TS EN 14212 / AC Ambient air - Standard method for measuring sulfur dioxide concentration by ultraviolet fluorescence
TS EN 1047-2: 2009 + A1 Secure storage units - Test methods and classification for fire resistance - Part 2: Data chambers and data container
TS EN 50131-2-7-1 / A1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-1: Intrusion sensors - Glass breakage sensors (acoustic)
TS EN 50131-2-7-2 / A1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
TS EN 50131-2-7-3 / A1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
TS EN 15659 Safe storage units - Classification and test methods for fire resistance - First fire storage units
TS EN 62676-1-1 Video surveillance systems for safety applications - Part 1-1: System requirements - General (IEC 62676-1-1: 2013)
TS EN 62676-1-1 / AC Video surveillance systems for safety applications - Part 1-1: System requirements - General (IEC 62676-1-1: 2013)
tst EN 62676-1-2 Video surveillance systems for security applications - Part 1-2: System requirements - Performance rules for image transmission
tst EN 62676-2-1 Video surveillance systems for security applications - Part 2-1: Video transmission protocols-General rules
tst EN 62676-2-2 Video surveillance systems used in security applications - Part 2-2: Image transmission protocols - HTTP and REST based IP interoperability application
tst EN 62676-2-3 Video surveillance systems for security applications - Part 2-2: Video transmission protocols-HTTP and REST based IP interoperability
TS EN 13071-1 Stationary waste containers with lifting and unloading capacity up to 5000 L - Part 1: General requirements
TS EN 13071-1 / AC Stationary waste containers with a capacity of up to 5000 L with top lift and bottom discharge - Part 1: General requirements
TS EN 16166 Sludge, treated bio waste and soil - Determination of adsorbable organically bound halogens (AOX)
TS EN 16166 Sludge, treated bio waste and soil - Determination of adsorbable organically bound halogens (AOX)
TS ISO 15690 Radiation protection - Recommendations for resolving discrepancies between individual dosimeter systems in parallel (ISO 15690: 2013)
TS EN ISO 14065 Greenhouse gases - Requirements for organizations validating and validating greenhouse gases for use in accreditation or other forms of mutual recognition (ISO 14065: 2013)
tst EN 15975-2 Drinking water supply safety - Risk and crisis management guidelines - Part 2: Risk management
TS EN 379 + A1 Personal eye protection - Automatic welding filters
TS EN 50625-1 Collection, logistics and processing requirements for WEEE - Part 1: General Processing Requirements
TS EN 50131-2-3 / IS1Alarm systems - Intrusion and panic alarm systems - Part 2-3: Rules for microwave sensors
TS EN 50131-2-4 / IS1 Alarm systems - Intrusion and panic alarm systems - part 2-4: Rules for combined passive infrared and microwave sensors
TS EN 50131-2-5 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-5: Requirements for combined passive infrared and ultrasonic sensors
TS EN 50131-2-6 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-6: Opening contacts (magnetic)
TS EN 50131-2-7-1 / IS1 Alarm systems - Intrusion and panic alarm systems -Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
TS EN 50131-2-7-2 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
TS EN 50131-2-2 / IS1 Alarm systems- Intrusion and panic alarm systems - Part 2-2: Intrusion sensors - Passive infrared sensors
TS EN 62676-1-1 Video surveillance systems for security applications - Part 1-1: System requirements - General
TS EN 60335-1 / AC Safety regulations - For household and similar electrical appliances - Part 1: General requirements
TS EN 50131-2-7-3 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
TS EN ISO 11925-2 Reaction to fire tests - Flammability of products directly exposed to flame - Part 2: Test with single flame source (ISO 11925-2: 2010)
ISO EN ISO 11925-2 / AC Reaction to fire tests - Flammability of products directly exposed to flame - Part 2: Test with single flame welding - Technical correction 1 (ISO 11925-2: 2010 / AC 1: 2011)
TS EN 1364-3 Fire resistance tests for non-bearing elements - Part 3: Curtain wall - Full installation (full equipment)
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
TS EN 1365-1 Fire resistance tests for load-bearing elements - Section 1: Walls
TS EN 1365-1 / AC Fire resistance tests - For load-bearing elements - Part 1: Walls
TS EN 1365-5 Fire resistance tests for load-bearing elements - Part 5: Balconies and sidewalks
TS EN 1365-6 Fire resistance tests for load-bearing elements - Part 6: ladders "
TS EN 1365-3 Fire resistance tests - Load bearing elements - Part 3: Beams
TS EN ISO 14738 Safety in machinery - Anthropometric requirements for the design of workplaces in machinery
TS EN ISO 16101 Packaging - Transport packaging of dangerous goods - Plastic compatibility tests
TS EN 13823 + A1 Fire reaction tests for construction products - Construction products other than floors exposed to thermal effects with a single combustion element
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled components from polyethylene (pe)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN 50131-2-7-1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-1: Intrusion sensors - Glass breakage sensors (acoustic)
TS 13739 Occupational health and safety management system - for Small and Medium Sized Enterprises (SME) - Construction industry
TS EN 50131-2-7-3 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
TS EN 45545-1 Railway applications - Fire protection in railway vehicles - Part 1: General
TS EN 45545-2 Railway applications - Fire protection in railway vehicles - Part 2: requirements for the fire behavior of materials and components
TS EN 45545-3 Railway applications - Fire protection in railway vehicles - Part 3: Fire resistance requirements for fire barriers
tst EN 45545-4 Railway applications - Fire protection in railway vehicles - Part 4: meets fire safety requirements for the design of wagons
TS EN 45545-5 Railway applications - Fire protection in railway vehicles - Part 5: Fire safety requirements for electrical equipment, including trolleybus, guided bus and magnetic lifting vehicle tracking
TS EN 45545-6 Railway applications - Fire protection in railway vehicles - Part 6: Fire control and management systems
TS EN 45545-7 Railway applications - Fire protection in railway vehicles - Part 7: meets fire safety requirements for flammable liquid and flammable gas installations
TS EN 13381-2 Test methods for the determination of the contribution of structural elements to fire resistance - Part 2: Vertical protective membranes
TS EN 13381-2 Test methods for the determination of the contribution of structural elements to fire resistance - Part 2: Vertical protective membranes
TS EN 13381-1 Test methods for the determination of the contribution of structural elements to fire resistance - Part 1: Horizontal protective membranes
tst EN ISO 13856-3 Safety in machines - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive buffers, plates, wires and similar devices
tst EN ISO 13855 Safety in machines - Installation of protective equipment according to the approach speed of the body parts
TS EN 54-16 Fire detection and fire alarm systems - Part 16: Audible alarm control and indication equipment
TS EN 54-20 Fire detection and fire alarm systems - Part 20: Smoke extraction detectors
TS EN 54-23 Fire detection and fire alarm systems - Part 23: Fire alarm devices- Video alarm devices
TS EN 54-25 Fire detection and fire alarm systems - Part 25: Components using radiolink
TS EN 54-25 / AC Fire detection and fire alarm systems - Part 25: Components using radiolink
TS EN 16327 Fire fighting - Positive pressure foam proportioning systems (PPFPS) and compressed air foam systems (cafs)
TS EN ISO 400 Personal protective equipment - Eye and face protection - Glossary
TS EN 54-20 / AC Fire detection and fire alarm systems - Part 20: Smoke extraction detectors
TSE CEN GUIDE 414 Safety in machines - Rules for the preparation and presentation of safety standards
tst EN 60695-9-2 Fire hazard test - Part 9-2: Spread of flame on the surface - Summary and relationship of test methods (IEC 60695-9-2: 2014)
tst EN 61496-1 Safety on machinery - Electrically sensitive protective equipment - part 1: General rules and tests
tst EN 61496-2 Machine safety - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active optoelectronic protective elements (AOPDs)
TS EN ISO 20346 Personal protective equipment - Protective footwear
TS EN ISO 1716 Fire reaction tests of building products - Determination of gross combustion temperature (calorific value) (ISO 1716: 2010) 28.09.2015
TS EN ISO 9239-1 Fire reaction tests of slabs - Part 1: Determination of combustion behavior using radiant heat source (ISO 9239-1: 2010)
TS EN 50131-10 Alarm systems - Intrusion and panic alarm systems - Part 10: Application-specific rules for Transceiver (SPT) used in surveillance facilities
TS EN 50131-2-2 / IS1 Alarm Systems - Intrusion and panic alarm systems - Part 2-2: Intrusion sensors - Passive infrared sensors
TS EN 50131-2-3 / IS1 Alarm Systems - Intrusion and panic alarm systems - Part 2-3: Rules for microwave sensors
TS EN 50131-2-4 / IS1 Alarm Systems - Intrusion and panic alarm systems - Part 2-4: Requirements for combined passive infrared and microwave sensors
TS EN 50131-2-5 / IS1 Alarm Systems - Intrusion and panic alarm systems - Part 2-5: Requirements for combined passive infrared and ultrasonic sensors
TS EN 50131-2-6 / IS1 Alarm Systems-Intrusion and panic alarm systems-Part 2-6: Opening contacts
TS EN 50131-2-7-1 / A1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-1: Intrusion sensors - Glass breakage sensors (acoustic)
tst EN 60601-1-3 Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for radiation protection in the x-ray device (IEC 60601-1-3: 2008)
Electrical medical devices section 60601: General rules for safety - Part 1 general standard for the protection of radiation in the standard diagnostic x-ray device for diagnostic purposes (IEC 3-1-1.3: 60601)
TS EN 50131-2-7-1 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-1: Intrusion sensors - Glass breakage sensors (acoustic)
TS EN 50131-2-7-2 / A1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
Electrical medical devices section 60601: General rules for safety - Part 1 standard for general diagnostic purposes for the protection of radiation in the x-ray device (IEC 3-1-1: 1.3)
TS EN 50131-2-7-2 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
TS EN 50131-2-7-3 / A1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
60601-1-3 / A1 / tst AC Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for radiation protection in the x-ray device for diagnostic purposes
TS EN 50131-2-7-3 / IS1 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
TS EN 50131-6 / A1 Alarm systems - Intrusion and panic alarm systems - Part 6: Power supplies
TS EN 50136-2 Alarm systems - Alarm transmission systems and equipment - Part 2: Guidelines for transceivers used in monitoring facilities
TS EN 1634-1 Fire resistance tests-Doors and shutters-Part 1: Fire doors and shutters
TS EN 1364-3 Fire resistance tests for non-live components - Part 3: Curtain walls - Full layout
TS EN 12464-2 Light and lighting - Lighting of workplaces - Part 2: Outdoor workplaces
TS EN 1621-2 Wear protective clothing for motorcyclists - Part 2: Tread protectors for motorcyclists - Rules and test methods
TS EN 71-2 + A1 Toy safety - Part 2: Flammability
TS EN 13501-6 Construction products and building elements - Fire classification - Part 6: Classification using data from the reactions of fire tests on electrical cables
TS EN 14043 High overhead devices for fire service use - Combined swing rotary stairs - Safety and performance requirements and test methods
TS EN 14044 High overhead devices for fire service - Stairs with consecutive moving turntables - Safety and performance requirements and test methods
TS EN 15254-6 Non-load-bearing walls-Expanded application of the results of fire resistance tests Part 6: Curtain Wall
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN ISO 17249 / AC Safety shoes with chainsaw cut resistance
TS EN ISO 11508 Soil quality - Determination of particle density
TSE CEN / TS 16640 Bio-based products - determination of bio-based carbon content of products by radio-carbon method
TS EN 45544-1 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 1: General rules and test methods
TS EN 45544-1 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 1: General rules and test methods
TS EN 45544-2 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 2: Performance requirements for devices used for exposure measurements
TS EN 45544-2 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 2: Performance requirements for devices used for exposure measurements
TS EN 45544-3 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 3: Performance requirements for devices for general gas detection
TS EN 45544-3 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 3: Performance requirements for devices for general gas detection
12566-3 + A2 50 Small wastewater treatment systems up to the equivalent population - Part 3: Ready-made and / or on-site domestic wastewater treatment plants
TSE ISO / TS 14067 Greenhouse gases - Carbon footprint of products - Requirements and guidance for calculation and communication
TSE CEN ISO / TS 14067 Greenhouse gases - Carbon footprint of products - Requirements and guidance for calculation and notification (ISO / TS 14067: 2013)
TS EN 16323 Glossary of wastewater engineering terms
TS EN ISO 13982-1 Protective clothing for use against solid particles - Part 1: Performance requirements for chemical protective clothing that protects the entire body against airborne solid particles (type 5 clothing)
TS EN ISO 13982-1 / A1 Protective clothing for use against solid particles - Part 1: Performance rules for chemical protective clothing that protects the entire body against airborne solid particles (type 5 clothing)
TS EN ISO 8030 Rubber and plastic hoses - Test method for the determination of flammability
TSE CWA 16768 Framework for sustainable value creation in the production network
CEN ISO / TS 14067: 2014 Greenhouse gases - Carbon footprint of products - Requirements and guidance for calculation and communication
TSE CEN / TR 16705 Boundary protection - Performance classification methodology
TS EN 15342 Plastics - Recycled plastics - Characterization of recycled materials from polystyrene (PS)
tst ISO / TR 14121-2 Safety on machines - Risk assessment - Part 2: Application guidance and examples of methods
TS EN 16522 Tanks for the transport of dangerous goods - Service equipment for tanks - Flame arresters for ventilation systems
TS EN 60335-2-30: 2009 / AC Safety regulations - For household electrical appliances - Part 2-30: Particular requirements for room heaters
TS EN 60335-2-31 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-31: Particular requirements for cooker hoods
TS EN 61243-3 Operating under voltage - Voltage detectors - Part 3: Two-pole low voltage version
TS EN 61243-3: 2014 / AC Operating under voltage - Voltage detectors - Part 3: Two-pole low voltage version
TS EN 61481-1 Operating under voltage - Phase comparators - Part 1: Capacitive type used for voltages greater than 1 kV aa
TS EN 61481-2 Operating under voltage - Phase comparators - Part 2: Resistive type for voltages from 1 kV to 36 kV aa
TS EN 12341 Ambient air - Standard gravimetric measurement method for the determination of PM10 or PM2,5 mass concentrations of suspended particulate matter
TS EN 12873-1 Effect of materials on drinking and potable water - Impact due to migration - Part 1: Test method for factory made products made of organic or glassy (porcelain / glassy enamel) materials or by combining them
tst EN 13946 Water quality - Guidelines for routine sampling and preparation of benthic diatoms from rivers and lakes
tst EN 14184 Water quality - Guidelines for the investigation of aquatic macrophytes in rivers
tst EN 14407 Water quality - Guidance for identification and enumeration of bi-atomic benthic samples from rivers and lakes
tst EN 15910 Water quality - Guide to estimating abundance of fish by mobile hydroacoustic methods
tst EN 16413 Ambient air quality - Biological monitoring with lichens - Evaluation of epiphytic lichen diversity
tst EN 16414 Ambient air quality - Bio algae monitoring - Accumulation of atmospheric pollutants from on-site algae collected for sample preparation
tst EN 16457 Characterization of wastes - Framework for the preparation and implementation of an experimental program - Objectives, planning and reporting
tst EN 16479 Water quality - Performance requirements and conformity testing procedures for water monitoring equipment - Automatic sampling devices for water and wastewater
TS EN ISO 13274 / ACA packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (Medium Bulk Containers) - Technical Correction 1 (ISO 13274: 2013 / Cor 1: 2014)
tst EN 16493 Water quality - Naming requirements for recording biodiversity data, taxonomic checklists and keys
tst EN 16503 Water quality - Guidance standard for the assessment of hydromorphological characteristics of transitional and coastal waters
TS EN ISO 17892-1 Geotechnical surveys and tests - Soil laboratory tests - Part 1: Determination of water content
TS EN ISO 17892-2 Geotechnical studies and tests - Soil laboratory tests - Part 2: Determination of unit volume mass
TS EN ISO 10693 Soil quality - Determination of carbonate content - Volumetric method (ISO 10693: 1995)
tst EN ISO 11267 Soil quality - Prevention of collembola (folsamia candida) growth caused by soil pollutants (ISO 11267: 2014)
TS EN 60335-2-14 / A11 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-14: Particular requirements for kitchen machines
TS EN ISO 11272 Soil quality - Determination of dry bulk density (ISO 11272: 1998)
Safety regulations for household and similar electrical appliances - Part 60335 - 2: Particular requirements for surface cleaning devices using liquids or vapors for domestic use 54
TS EN 16231 Energy efficiency benchmarking methodology
TS EN 14466 + A1 Fire fighting pumps - Portable pumps - Safety and performance requirements, tests
TS EN 60825-1 Safety of laser products - Part 1: Hardware classification and rules
TS EN 62676-1-1 / AC Video surveillance systems for security applications - Part 1-1: System requirements - General
TS EN 16502 Determination of soil acidity according to Baumann-Gully test method
TS EN 16575 Products of biological origin - Terms and definitions
TS EN 60695-1-40 Fire hazard test - Part 1-40: Guidance for evaluating the fire hazard of electrotechnical products - Insulating liquids
TS EN 60695-9-2 Fire hazard test - Part 9-2: Spread of flame on the surface - Summary and relationship of test methods (IEC 60695-9-2: 2014)
TS EN 50636-2-100 Safety rules - For electrical appliances used in households and similar places - Part 2-100: Particular requirements for handheld, mains-operated, garden air blowers, vacuumers and blowers / vacuumers
TS EN 60695-2-12 / A1Fire hazard test - Part 2-12: Test methods based on glow / hot wire - Method for flammability test with glow-wire for materials
60695-2-13: 2010 / A1 Fire hazard test - Part 2-13: Test methods based on glow / hot wire - Flammability test method with glow-wire for materials
TS EN 60695-10-2 Fire hazard test - Part 10-2: Ball pressure test method (IEC 60695-10-2: 2014)
TS EN 60695-2-11 Fire hazard test - Part 2-11: Test methods based on glow / hot wire - Glow wire flammability test method for final products (GWEPT) (IEC 60695-2-11: 2014)
TS EN 60335-1: 2012 / A11 Safety regulations - For household and similar electrical appliances - Part 1: General requirements
TS EN 50625-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements
TS EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps 0
TS ISO 3500 Fire extinguisher tubes - Seamless steel CO2 tubes used in ships
TS ISO 3500 / AMD 1 Fire extinguishers - Seamless steel CO2 tubes used in ships
TS EN ISO 17624 Acoustics - Guidance on noise control with acoustic curtains in offices and study rooms (ISO 17624: 2004)
TS EN ISO 4869-4 Acoustics - Ear protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound repairing sleeves
TS EN ISO 11508 Soil quality - Determination of particle density (ISO 11508: 1998)
TS EN 50271 Electrical devices for the detection and measurement of flammable gases, toxic gases or oxygen - Rules and tests for devices using software and / or digital technologies
TS EN 1021-1 Furniture - Evaluation of the flammability of upholstered furniture - Part 1: Combustion source internal combustion cigarette
tst EN 1021-2 Furniture - Evaluation of the flammability of upholstered furniture - Part 2: Combustion welding - Matched flame equivalent
TS EN 364: 1992 / AC: 1993 Personnel protection equipment against falling from height - Test methods
TS ISO 3500 / AMD 1 Fire extinguishers - Seamless steel CO2 tubes used in ships
TS EN 14432 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air intake valves
TSE CEN ISO / TR 7250-2 Basic human body measurements for technological design - Part 2: Statistical summary of body measurements from the international population
TS ISO 12749-2 Nuclear energy, nuclear technologies and radiation protection-Terms and definitions - Part 2: Radiation protection
TS EN 13832-1 Chemical protective footwear - Part 1: Terms and test methods
TS EN 13832-2 Chemical protective footwear - Part 2: Rules for chemical resistant footwear in laboratory conditions
TS EN 13832-3 Chemical protective footwear - Part 3: Rules for highly resistant chemical footwear in laboratory conditions
TS EN 13138-1 Swim aids for swimming training - Part 1: Safety rules and test methods for worn swim aids
TS EN 13138-3 Swim aids for swimming training - Part 3: Safety rules and test methods for worn swimming seats
TS EN 13138-2 Swimming aids for swimming training - Part 2: Safety rules and test methods for retained swimming aids
TS ISO 12749-2 Nuclear energy, nuclear technologies, and radiological protection - Word - Part 2: Radiological Protection
TS ISO 15690 Radiological protection - advice on incompatibilities between individual dosimeter systems used in parallel
TS EN 12940 Footwear waste production - Classification and management of waste
TS EN 1005-1 + A1 Safety in machinery - Physical performance of man - Part 1: Terms and definitions
TS EN ISO 4126-6 Safety devices for protection against overpressure - Part 6: Application, selection and installation of explosion-proof safety devices
TSE CEN GUIDE 414 Safety in machines - Rules for the preparation and presentation of safety standards
TS EN 16502 Determination of soil acidity according to Baumann-Gully test method
TS EN 14116 + A1 Tanks for the transport of dangerous goods - Digital interface for product recognition device for liquid fuels
TS EN 14432 Tanks - For the transport of dangerous goods - Tank equipment for the transport of liquid chemicals product discharge and air inlet valves
TS EN 14433 Tanks - For the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Bottom valves
TSE CEN / TS 16675 Waste characterization - Test methods for determination of monolithic status of wastes
TS EN ISO 16000-19 Indoor air - Part 19: Sampling strategy for molds
TS EN 16424 Waste characterization - Scanning methods for elemental composition with portable X-ray fluorescence devices
ISO / TS 29843-1 Soil quality - Determination of soil microbial diversity - Part 1: Phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (pretreatment) analysis method
ISO / TS 29843-2 Soil quality - Determination of soil microbial diversity - Part 2: Phospholipid fatty acid analysis (PLFA) using simple PLFA extraction method
TS EN 60846-1 Radiation protection equipment - Ambient and / or directional dose equivalent (speed) meters and / or monitors for beta, X and gamma irradiation - Part 1: Portable workplace and environmental meters and monitors
TS EN 13381-5 Test methods for the determination of the contribution of structural elements to fire resistance - Part 5: Protection applied to concrete / profiled steel sheet composite element
TS EN 13381-6 Test methods for the determination of the contribution of structural elements to fire resistance - Part 6: Protection applied to concrete filled steel columns
TS EN ISO 14460 / AC Protective clothing for motorists - Protection against heat and fire - Performance requirements and test methods
TS EN ISO 16000-32 Indoor air - Part 32: Examination of buildings for the formation of pollutants
TS EN 16479 Water quality - Performance requirements and conformity testing procedures for water monitoring equipment - Automatic sampling devices for water and wastewater
TS EN 16493 Water quality - Naming requirements for recording biodiversity data, taxonomic checklists and keys
TS EN 16503 Water quality - Guidance standard for the assessment of hydromorphological characteristics of transitional and coastal waters
TS ISO 17378-2 Water quality - Determination of arsenic and antimony - Part 2: Hydride-induced atomic absorption spectrometry method (HG-AAS)
TS EN 12881-1 Conveyor belts - Flammability test with fire simulation section 1: Propane combustion test
TS EN 364: 1992 / AC: 1993 Personnel protection equipment against falling from height - Test methods
TS EN 50131-6 / A1 Alarm systems - Intrusion and panic alarm systems - Part 6: Power supplies
TSE CLC / TS 50131-9 Alarm systems - Intrusion and panic alarm systems - Part 9: Alarm verification - Methods and principles
TS EN 50131-10 Alarm systems - Intrusion and panic alarm systems - Part 10: Application-specific rules for Transceiver (SPT) Used in Surveillance Buildings
TS EN 12083 / AC Protective breathing apparatus - Breathing techniques with hose (non-masked filters) - Dust filters, gas filters and combined filters - Features, tests and marking
TS EN 12083 / AC Protective breathing apparatus - Breathing techniques with hose (non-masked filters) - Dust filters, gas filters and combined filters - Features, tests and marking
TS EN 15090 Footwear for firefighters
TS EN 16471 Helmets for firefighters - Helmets for fire fighting in rural areas
TS EN 16473 Heads for firefighters - Heads for technical rescue
TSE CEN ISO / TR 7250-2 / A1 Human body basic measurements for technological design - Part 2: Statistical summary of body measurements taken from national population (ISO / TR 7250-2: 2010 / Amended 1: 2013)
TS EN 62321-4 Determination of specific substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
TS EN 62321-5 Determination of specific substances in electrotechnical products - Part 5: AAS, AFS, ICP-OES and ICP-MS with cadmium, lead and chromium in metals and cadmium and lead in metals
TS EN 62321-3-2 Determination of specific substances in electrotechnical products - Part 3-2: Screening - Combustion by total bromine in polymers and electronics - Ion chromatography
TS EN 1366-3 Fire resistance tests for installation installations - Part 3: Seals
TS EN 1366-4 + A1 Fire resistance tests for installation installations - Part 4: Linear connection seals
TS EN 14470-2 Fire safety storage cabinets - Section 2: Safety cabinets for compressed gas cylinders
TS EN 14540 Fire fighting hoses - Sealed flat hoses for stationary systems
TS EN 54-3Fire detection and fire alarm systems - Part 3: Fire alarm devices - Audio equipment
TS EN 13565-2 Stationary fire extinguishing systems - Foam systems - Part 2: Design, construction and maintenance
TS EN 13565-2: 2009 / AC: 2010Fixed fire extinguishing systems - Foam systems - Part 2: Design, construction and maintenance
TS EN 15004-1 Fixed fire-fighting systems - Gas-jet systems - Part 1: Design, installation and maintenance
tst EN 50381 Portable ventilated rooms with or without internal discharge
EN 50381 / tst AC Portable ventilated rooms with or without internal discharge
tst EN 50636-2-100 Safety rules - For electrical appliances used in households and similar places - Part 2-100: Particular requirements for handheld, mains-operated, garden air blowers, vacuumers and blowers
TS EN 60335-1 / AC Safety regulations - For household and similar electrical appliances - Part 1: General requirements
TS EN 60335-1 / A1 1 Safety regulations - For household and similar electrical appliances - Part 1: General requirements
tst EN 60335-2-27 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-27: Particular requirements for devices with ultraviolet and infrared radiation effect on the skin
TS EN 60335-2-7 / A11Security rules - For household and similar electrical appliances - Part 2-7: Particular requirements for washing machines
tst EN 60695-10-2 Fire hazard test - Part 10-2: Ball pressure test method (IEC 60695-10-2: 2014)
tst EN 60695-11-10 Fire hazard test - Part 11-10: Test flames - Horizontal and vertical flame test methods of 50 w
tst EN 60695-11-20 Fire hazard test - Part 11-2: Test flames - Strong pre-mixed flame rated 1 kw - Instruments, confirmatory test apparatus and guidance
TS EN 61034-2 / A1 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules
tst EN 60695-1-40 Fire hazard test - Part 1-40: Guidelines for assessing the fire hazard of electrotechnical products - Insulating liquids
TS EN 60695-2-11 Fire hazard test - Part 2-11: Test methods based on incandescent / hot wire - Flammability test method with incandescent wire for final products (IEC 60695-2-11: 2014)
TS EN 353-1 Personal fall protection equipment - Guided type fall arresters with anchor line - Part 1: Guided type fall arresters with rigid anchor line
TSE ISO / TS 11602-1 Fire protection - Portable and mobile fire extinguishers - Part 1: Selection and placement
TS EN 1366-1 Fire resistance tests for service installations Part 1: Ventilation ducts
TS EN 1366-12 Fire resistance tests for service installations - Section 12: Non-mechanical fire barrier for ventilation duct system.
60695-11-10: 2013 / AC Fire hazard test - Part 11-10: Test flames - Horizontal and vertical flame test methods of 50 w
TS EN ISO 25980 Welding and similar processes - Health and safety - Transparent welding curtains, strips and screens for arc welding
TS ISO 8721 Road vehicles-Measurement techniques used in impact tests-Optical devices
TSE ISO / TS 11602-2 Fire protection - Portable and mobile fire extinguishers - Part 2: Inspection and maintenance
TS EN 16034 Pedestrian door sets, industrial, commercial, garage doors and opening windows - Product standard, performance and characteristics - Fire resistance and / or smoke control features
TS EN 353-1 Personal fall protection equipment - Guided type fall arresters with anchor line - Part 1: Guided type fall arresters with rigid anchor line
TS EN 14429 Characterization of wastes - Extraction behavior test - Effect of pH on extraction with acid / base addition initially
TS EN 14533 Textile and textile products - Combustion properties of bedding materials - Classification chart
TS EN 14997 Characterization of wastes - Extraction behavior test - Effect of pH on extraction with continuous pH control
TS EN 60335-2-4 / A1 Safety regulations - For household appliances and similar electrical appliances - Part 2 - 4: Particular requirements for rotary washers
TS EN 60839-11-1 / ACAlarm and electronic security systems - Part 11-1: Electronic access control systems - System and component requirements
TS ISO 5667-20 Water quality - Sampling - Part 20: Guidance on using sampling data to make decisions - Threshold values and compatibility with classification systems
TS EN 61526 Radiation protection measuring devices - Measuring Hp (10) and Hp (0,07) personal dose equivalents for X, gamma, neutron and beta radiation - Direct reading personal dose equivalent measuring devices
TS EN 50598-3 Environmental design for power start systems, motor starters, power electronic systems and their operational applications - Part 3: Quantitative environmental design approach based on lifecycle assessment including the content of environmental communiqués and product category rules
TS EN 374-2 Protective gloves - Against chemicals and microorganisms - Part 2: Determination of resistance to penetration
TS EN 15768 Effect of materials on drinking and using water - GC-MS Identification of organic substances that can pass into water
TS EN ISO 16198 Soil quality - Plant-based test for the assessment of environmental bioavailability of trace elements to plants
TS EN 62676-3 Video surveillance systems for use in security applications - Part 3: Analogue and digital video interfaces
TS EN 454 Food processing machines - Rotary mobile agitators - Safety and hygiene features
TS EN 14181 Constant welding emissions - Quality assurance of automatic measuring systems
TS EN 61577-3 Radiation protection equipment - Radon and radon degradation product measuring instruments - Part 3: Particular requirements for radon degradation product measuring instruments
TS EN 61577-4 Radiation protection equipment - Radon and radon degradation product measuring devices - Part 4: Equipment for the realization of reference atmospheres containing radon isotopes and their degradation products
TSE CEN / TR 16394 Characterization of sludges - Method for the preparation of synthetic suspensions
TSE CEN / TR 16788 Characterization of sludges - Good practice guide for thermal processes
TSE CEN / TS 13649 Constant source emissions - Determination of the mass concentration of each gaseous organic compound - Solvent extraction or thermally monitored sorptive sampling method
TS EN 14718 Effects of organic substances on drinking and utility water - Determination of chlorine requirement - Test method
TS EN 50574-1 / AC Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN 50574-1 / AC Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN 50574-1 Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN 50574-1 Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
tst EN 50574-1 Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
tst EN 50574-1 Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN 50574-1 / AC Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN 50574-1 / AC Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
TS EN ISO 7730 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using the calculation of PMV and PPD indices and regional thermal comfort criteria
tst ISO 2631-1 Mechanical vibration and shock - Assessment of exposure to whole-body vibration - Part 1: General rules
tst ISO 2631-1 / A1 Mechanical vibration and shock - assessment of exposure to whole-body vibration - Part 1: General rules
TS EN ISO 13287 Personal protective equipment - Footwear - Test method for slip resistance
TS EN 13921 Personal protective equipment - Ergonomic principles
TS EN 13921 Personal protective equipment - Ergonomic principles
tst EN ISO 12311 Personal Protective Equipment - Test methods for sunglasses and similar eye products
TS EN 363 Personal fall protection - Personal fall protection
TS EN 813 Personal fall protection - Lower seat belts
TS EN 1497 Fall protection personal protective equipment
TS EN 14404 + A1 Personal protective equipment - Knee protectors for working in the kneeling position
TS EN 1366-5 Fire resistance tests for service installations - Part 5: Service ducts and manholes
TS EN 13381-5 Test methods for the determination of the contribution of fire resistance of structural elements - Part 5: Applied protection of concrete / profiled steel sheet composite member
TS EN 13381-6 Test methods for the determination of the contribution of fire resistance of structural elements - Part 6: Applied protection hollow steel columns filled concrete
TS EN 15004-5 Stationary fire fighting systems - Gas extinguishing systems - Part 5: HCF System design and physical properties of gas extinguishing systems for 227ea extinguishing media (ISO 14520-9: 2006)
TS EN 15004-7 Stationary fire fighting systems - Gas extinguishing systems - Part 7: System design and physical properties of gas extinguishing systems for IG-01 extinguishing media (ISO 14520-12: 2005, modified)
TS ISO 8769 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters
TSE ISO / TR 14069 Greenhouse gases - Calculation and reporting of organizations' greenhouse gas emissions - Guidelines for the implementation of ISO 14064-1
TS ISO 5667-11 Water quality - Sampling - Section 11: Groundwater sampling guide
TS ISO 5667-11 Water quality - Sampling - Section 11: Groundwater sampling guide
TS ISO 8178-9 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test methods for exhaust gas emissions from compression ignition engines operating under transition conditions
TS ISO 15202-1 Workplace air - Determination of metals and semi-metals in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
TS ISO 15202-2 Workplace air - Determination of metals and semi-metals in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
TS ISO 14442 Water quality - Guidance for algae growth inhibition experiments with less soluble substances, volatile compounds metals and waste water
TS ISO 8178-2 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 2: Measuring gas and particulate exhaust emissions in the field
TS ISO 8178-4 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 4: Test cycles for different engine applications
tst ISO 7250-3 Basic human body measurements for technological design - Part 3: Universal and national design values for use in ISO standards
TS ISO 3500 Fire extinguisher tubes - Seamless steel CO2 tubes used in ships
TS EN 14994 Gas explosion - Protective release systems
TS EN 15089 Explosion insulation systems
TS EN 1744-8 Tests for chemical properties of aggregates - Part 8: Classification test for determination of metal content of aggregates in Municipal Ash Incinerator (MIBA)
TS EN 16020 Explosion guides
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-2 Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN ISO 14593 Water quality - Evaluation of the final aerobic biodegradability of organic compounds in aqueous media - Inorganic carbon analysis method in sealed containers (CO2 test in liquid cavity) (ISO 14593: 1999)
TS EN 50131-2-7-2 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
TS EN 60825-1 Safety of laser products - Part 1: Hardware classification and rules (IEC 60825-1: 2014)
TS EN 13083 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Adapter for loading and unloading from below
TS EN 14564 Tanks for the transport of dangerous goods - Terms
TS EN 250Breathing equipment - Self-contained open-circuit compressed air plunger - Rules, tests and marking
TS EN 352-8 Hearing protectors - Safety rules and tests - Part 8: Entertainment radio headphones
TS EN 352-5 / A1 Hearing protectors - Safety rules and tests - Part 5: Active ear muffs to reduce active noise
TS ISO 11925-3 / Cor1 Building materials - Fire resistance tests - Flammability upon direct exposure to flame - Part 3: Test with multiple flame welding
TS ISO 5658-2 Fire tests Response - Flame Spread - Part 2: Lateral spread in building and transport products in vertical configuration
tst EN 13381-4 Test method for determining the contribution of structural members to fire resistance - Part 4: Passive protection applied to steel members
TS EN 15198 Risk assessment methodology for non-electrical equipment and components intended for use in potentially explosive atmospheres
TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances
TS EN 10051 Continuous hot-rolled, uncoated and alloy steel cut from uncoated steel sheet / sheet and wide strip - Size and shape tolerances
TS EN 16334 Railway applications - Passenger alarm systems - System requirements
TS EN 50355 Railway applications - Railway vehicle cables with special fire performance - User manual
TS EN 60335-2-7 / A1 Safety regulations - For household and similar electrical appliances - Part 2-7: Particular requirements for washing machines
tst EN 50292 Electrical devices for the determination of carbon monoxide in homes, caravans and boats - Guidance on the selection, installation, use and maintenance of equipment
TS ISO 9697 Water quality - Beta activity in non-salt water - Test method using thick source
TS ISO 9697 Water quality - Beta activity in non-salt water - Test method using thick source
TS ISO 7934 / Amd 1: 1998 Constant source emissions-Determination of sulfur dioxide mass concentration-Hydrogen peroxide / barium perchlorate / thorin method
TS ISO 7766 Photography processing wastewater - Analysis of cyanides - Spectrometric determination of hexacyanoferrate (II) and hexacyanoferrate (III)
TS ISO 16107 Workplace air-performance evaluation protocol for diffusion sampling devices
TS ISO 11277 Soil quality - Determination of particle size distribution in mineral soil - Screening and sedimentation method
TS ISO 5667-6 Water quality - Sampling - Part 6 - Sampling guide for rivers and streams
TS ISO 5667-6 Water quality - Sampling - Part 6 - Sampling guide for rivers and streams
TS ISO 9096 / Cor 1: 2006 Constant source emissions - Manual determination of the mass concentration of particulate matter
TS EN 61482-1-2 Working under voltage - Protective clothing against thermal hazards caused by electric arc - Part 1-2: Test methods - Method 2: Determination of material and clothing arc protection class using compressed and oriented arc (box test)
TS EN ISO 2919 Radiation protection - Closed radioactive sources - General rules and classification
TS 5489 EN ISO 7393-1 / D1 Water quality-Determination of free chlorine and total chlorine-Part 1: N, n-Diethyl-1,4-Titrimetric method besides phenylenediamine (ISO 7393-1: 1985)
TS EN 15346 Plastics - Recycled plastics - Characterization of recycled components from poly (vinyl chloride)
TS EN 15348 Plastics - Recycled plastics - Characterization of recycled components from poly (ethylene terephthalate)
TS EN ISO 2919 Radiation protection - Sealed sealed radioactive sources - General rules and classification
TS ISO 6962 Nuclear energy - Standard method for testing long-term alpha radiation stability of matrices for solidification of high activity level wastes
TS ISO 6962 Nuclear energy - Standard method for testing long-term alpha radiation stability of matrices for solidification of high activity level wastes
TS EN 54-1: 2011 Fire detection and fire alarm systems part 1: Introduction
TS EN 61243-3: 2014 / AC-2 Operating under voltage - Voltage detectors - Part 3: Two-pole low voltage version
TS EN 60335-2-5 Safety regulations - Part for household and similar electrical appliances 2-5: Particular requirements for dishwashers
TS EN 60335-2-6 Safety regulations - for household and similar electrical appliances - part 2.6: Particular requirements for fixed-hearth furnaces, ovens, ovens and the like
TS ISO 8761 / Cor 1 Workplace air - Determination of nitrogen dioxide mass concentration - Method of detector tubes for short-term sampling with direct indication MODIFICATION 1
TS ISO 11465 / Cor.1 Soil quality - Determination of dry matter and water based on mass basis -Gravimetric method MODIFICATION 1
TS ISO 7934 / Amd 1 Constant source emissions - Determination of sulfur dioxide mass concentration - Hydrogen peroxide / barium perchlorate / thorin method MODIFICATION 1
TS ISO 9096 / Cor 1 Constant source emissions - Manual determination of the mass concentration of particulate matter
tst ISO / TR 14069 Greenhouse gases - Calculation and reporting of greenhouse gas emissions by organizations - Guidelines for the implementation of ISO 14064-1
TS EN 60335-2-95: 2015 / A1 Safety regulations - For electrical appliances used in homes and similar places - Part 2-95: Particular requirements for drive systems for vertically moving garage doors for residential use
TS EN 60695-11-20 Fire hazard test-Part 11-20: Test flames-500 W flame test methods
TS EN ISO 11074 Soil quality - Terms and definitions
TS ISO 8672 Air quality - Determination of inorganic fiber concentration in air by phase contrast optical microscope - Membrane filter method
TS ISO 10155 / Cor 1: 2002 Constant source emissions - Determination of mass concentrations of particles - Automatic monitoring - Performance characteristics, test methods and properties
TS ISO 8178-7 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 7: Determination of the engine family
TS ISO 7168-1 Air quality - Data exchange - Part 1: General data format
TS ISO 7168-2 Air quality - Data exchange - Part 2: Concentrated data format
TS ISO 8761 / Cor 1: 2009 Workplace air - Determination of nitrogen dioxide mass concentration - Method of detector tubes for short-term sampling with direct indication
TS ISO 9696 Water quality-Measurement of alpha activity in fresh water-Thick welding method
TS ISO 5667-14 Water quality - Sampling - Part 14: Quality assurance and quality control guide for sampling and preparation of environmental water
TS ISO 10498 Environmental air - Determination of sulfur dioxide - Ultraviolet fluorescence method
TS ISO 11047 Soil quality - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc content - Flame and electrothermal atomic absorption spectrometric methods
TS ISO 6107-7 Water quality - Terms - Section 7
TS ISO 11265 / Cor.1 Soil quality - Determination of electrical conductivity
TS ISO 11265 / Cor.1 Soil quality - Determination of electrical conductivity
TS EN ISO 11268-1 Soil quality - Effects of pollutants on worms - Part 1: Determination of acute toxicity on Eisenia fetida / Eisenia andrei
TS ISO 3929 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
TS ISO 8466-2 Water quality - Calibration, evaluation and estimation of performance characteristics of analytical methods - Part 2: Calibration strategy for nonlinear second order calibration functions
TS ISO 11465 / Cor.1 Soil quality-Determination of dry matter and water by mass basis-Gravimetric method
TS ISO 11465 / Cor.1 Soil quality-Determination of dry matter and water by mass basis-Gravimetric method
TS ISO 11465 / Cor.1 Soil quality-Determination of dry matter and water by mass basis-Gravimetric method
TS EN ISO 11274 Soil quality - Determination of water retention - Laboratory methods (ISO 11274: 1998 + Cor 1: 2009)
TS EN 60335-2-30 / tstA11 Safety regulations - For domestic and similar electrical appliances - Part 2-30: Particular requirements for room heaters
tst EN ISO 11275 Soil quality - Determination of unsaturated hydraulic conductivity and water retention - Wind evaporation method (ISO 11275: 2004)
tst EN ISO 11276 Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276: 1995)
TS EN ISO 11461 Soil quality - Determination of soil water content in volume fraction using core arms - Gravimetric method (ISO 11461: 2001) 12.11.2015
tst EN ISO 12010 Water quality - Determination of short chain polychlorinated paraffins (PKPs) in water - By gas chromatography-mass spectrometry (GC-MS) and negative ion chemical ionization (NCI) method (ISO 12010: 2012)
tst EN ISO 14238 Soil quality- Biological methods- Determination of nitrogen mineralization and nitrification in soils and effect of chemicals on these processes (ISO 14238: 2012)
TS EN ISO 16000-32 Indoor air - Part 32: Examination of buildings for the formation of pollutants (ISO 16000-32: 2014)
tst EN ISO 16387 Soil quality - Effects of pollutants on Enchytraeidae (Species of Enchytraeus) - Determination of effects on reproduction (ISO 16387: 2014)
tst EN ISO 16665 Water quality - Quantitative sampling and preparation of marine soft bottom macrofauna (ISO 16665: 2014)
TS EN ISO 17184 Soil quality - Determination of carbon and nitrogen by near infrared spectrometry (NIRS) (ISO 17184: 2014)
tst EN ISO 18772 Soil quality - Guidance on extraction procedures for chemical and ecotoxicological testing of subsequent soil and soil materials (ISO 18772: 2008)
tst EN ISO 27108 Water Quality - Determination of selected pesticides and biocide products - Gas chromatography - mass spectrometry (GC-MS) using solid-liquid microextraction (SPME) method (ISO 27108: 2010)
tst EN ISO 28258 Soil quality - Digital exchange of soil-related data (ISO 28258: 2013)
TS ISO 17378-2 Water quality - Determination of arsenic and antimony - Part 2: Method using hydride-forming atomic absorption spectrometry (HG-AAS)
TS CWA 16938 Standard documentation for chemical exposure models
TSE CEN / TS 16861 Plastics - Recycled plastics - Determination of selected marker compounds in recycled polyethylene terephthalate (PET) used in foods
TS EN 50553 / AC Railway applications - Rules on the ability to work in case of fire on railway vehicles
tst EN 50625-2-2 Collection, handling and treatment requirements for Waste Electrical and Electronic Equipment - Part 2-2: Treatment requirements for Waste Electrical and Electronic Equipment including CRTs and flat panel displays
TS EN 13277-3 Protective equipment for martial arts - Part 3: Additional features and test methods for body protectors
TS EN ISO 17249 Safety shoes with chainsaw cut resistance
TSE CEN ISO / TR 12296 Ergonomics - Hand transport of people in the healthcare industry
TS EN ISO 4126-7 Safety devices for overpressure protection - Part 7: Common data
TS EN ISO 14119 Safety on machines - Interlocking devices with guards - Principles for design and selection
TS EN 14025 Tanks - Transportation of dangerous goods - Pressurized metallic tanks - Manufacturing and design
TS EN 16602-70-21: 2014 Space product assurance-Examination of space materials with flammability test
tst EN 469Protective clothing for firefighters -Features and test methods for fire-fighting protective clothing
TS EN 13381-1 Test methods for the determination of the contribution of structural elements to fire resistance-Part 1: Horizontal protective membranes
TS EN 13381-2 Test methods for the determination of the contribution of structural elements to fire resistance-Part 2: Vertical membranes
TS EN 13381-2 Test methods for the determination of the contribution of structural elements to fire resistance-Part 2: Vertical membranes
TS EN ISO 17892-1 Geotechnical surveys and tests - Soil laboratory tests - Part 1: Determination of water content
TS EN ISO 17892-2 Geotechnical studies and tests - Soil laboratory tests - Part 2: Determination of unit volume mass
TSE CEN GUIDE 414 Safety in machines - Rules for the preparation and presentation of safety standards
TS EN ISO 20471: 2013 High visibility warning clothing - Test methods and features
TS EN 352-8 Hearing protectors - Safety rules and tests - Part 8: Entertainment radio headphones
TS EN 13087-3 / A1 Protective helmets - Test methods - Part 3: Resistance to penetration
TS EN 13087-7 / A1 Protective helmets - Test methods - Part 7: Resistance to flame
TS EN ISO 14460 / AC Protective clothing for motorists - Protection against heat and fire - Performance requirements and test methods
TS EN ISO 22311 Community security - Video surveillance - Export interoperability (ISO 22311: 2012)
TS EN 62682 Management of alarm systems in industrial processes
TS EN ISO 7250-1 Basic measurements of the human body for technological design - Part 1: Body measurement recipes and markings
TS EN ISO 15007-1 Road vehicles - Measurement of the driver's visual behavior with regard to navigation information and control systems - Part 1: Definitions and variables (ISO 15007-1: 2014)
TS EN 354Fall protection against falling - Fastening devices
TS EN 15207 Tanks for the transport of dangerous goods-24 v plug-in connection and supply characteristics for operation in hazardous situations at supply voltage v
TSE K 476The machines for separating and storing vegetable waste oils
TS EN 12021 Respiratory protection devices - Compressed gases for breathing apparatus
TS EN 13138-1 Swimming aids for swimming courses - Part 1: Safety rules and test methods for swimming aids
TS EN ISO 14001 Environmental management systems - Terms and conditions
TS EN ISO 14001 Environmental management systems - Terms and conditions
TS EN 13094 Tanks for the transport of dangerous goods - Working tanks Metallic tanks not exceeding 0,5 bar - Design and construction
TS EN 16617 Pipeline - Combustible gas Corrugated metal hose assemblies - Performance requirements, testing and marking
tst EN 1948-4 + A1 Constant source emissions-Determination of mass concentrations of PCDD / PCDF and PCB-like dioxins-Part 5: Sampling and analysis of PCB-like dioxins
TSE CEN / TS 1948-5Fixed source emissions - Determination of mass concentration of PCDDs / PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs / PCDFs and PCBs.
TSE CEN / TS 16765 LPG equipment and accessories - Ambient conditions for CEN / TC 286 standards
TS EN 14742 Characterization of sludges - Chemical treatment in laboratory
TS EN 15002 Waste Characterization - Preparation of test sample sections from laboratory sample
TS EN 15863 Waste Characterization - Extraction behavior test for basic characterization - Dynamic monolithic extraction test with periodic regeneration of the extraction agent under constant conditions
TS EN 14757 Water quality - Fish sampling with multiple porosity nets
TS EN ISO 12404 Soil quality - Guidance on selection and application of screening methods
TS EN ISO 13196 Soil quality - Screening of soils using energy-dispersive X-ray fluorescence spectrometry for selected elements using a hand-held or portable instrument
TS EN 16471 Headgear for firefighters - Headgears for extinguishing fires
TS EN 1365-2 Fire resistance tests-Load bearing elements-Part 2: Floors and roofs
TS EN 13823: 2010 + A1: 2014 Fire reaction tests for construction products - Thermal products with a single combustion element - Construction products other than slabs
TS EN 50270 Electromagnetic compatibility (emu) - Electrical devices for the detection and measurement of flammable gases, toxic gases or oxygen
TS EN 60335-2-23: 2003 / A2 Safety regulations - For household and similar electrical appliances - Part 2 - 23: Particular requirements for skin or hair care devices
Safety regulations - For household and similar electrical appliances - Part 60335 - 2: Particular requirements for surface cleaning devices using liquids or vapors for domestic use
TS EN 60335-2-103 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2- 103: Particular requirements for drives for doors, doors and windows
TS EN 62115: 2005 / A12 Electric toys - Safety
TS EN 60335-2-56: 2003 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-56: Particular requirements for projectors and similar devices
TS EN 60335-2-101: 2002 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-101: Particular requirements for evaporators
TS EN 16473 Heads for firefighters - Heads for technical rescue
TS EN 13138-2 Auxiliary equipment for swimming training - Part 2: Safety rules and test methods for retained swimming aids
TS EN 13138-3 Auxiliary equipment for swimming training - Part 3: Safety rules and test methods for worn swimming seats
TS EN 13381-3 Test methods for the determination of the contribution of structural elements to fire resistance - Part 3: Protection applied to concrete elements
tst EN 14043 High-aerial installations for fire service use - Combined swing-top ladders - Safety and performance requirements and test methods
TS ISO 15779 Concentrated aerosol fire extinguishing systems - Rules and test methods for components and system design, installation and maintenance - General rules
TS 13672Specifications - Rules for the recovery of end-of-life vehicle tires
tst EN ISO 15011-4 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke datasheet (ISO 15011-4: 2006)
TS EN ISO 15011-4 / tst A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet (ISO 15011-4: 2006 / Amd 1: 2008)
TS EN 14116 + A1 Tanks for the transport of dangerous goods - Digital interface for product recognition device for liquid fuels
TS EN 14433 Tanks - For the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Bottom valves
TS EN 1147 Portable ladders for fire service
TS EN 694Fire extinguishing hoses - Semi-rigid hoses for stationary systems
TS EN 14973 Conveyor belts for use in underground installations - Electrical and flammability safety features
TS EN 62321-2 Determination of specific substances in electrotechnical products - Part 2: Dismantling, separation and mechanical sample preparation
TS EN 60335-2-14 / A12 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-14: Particular requirements for kitchen machines
TS EN 60335 / A11 / ACSecurity rules - For household electrical appliances - Part 2-14: Particular requirements for kitchen machines
tst EN 14181 Constant welding emissions - Quality assurance of automatic measuring systems
TS EN ISO 14644-2 Clean rooms and their controlled environments - Part 2: Monitoring of cleanroom performance with particle concentration for air purifying purposes
TS EN 60335-2-15 Safety regulations - for electrical appliances used in domestic and similar areas - Part 2.15: Particular requirements for liquid heating devices
TS EN 60335-2-35 Safety regulations - For domestic and similar electrical appliances - Part 2-35: Particular requirements for instantaneous water heaters
TS EN 60335-2-3 Safety regulations - for household and similar electrical appliances - part 2.3: Particular requirements for electric irons
tst EN 50270 Electromagnetic compatibility (emu) - Electrical devices used for detection and measurement of flammable gases, toxic gases or oxygen
TS EN ISO 11611 Protective clothing - Used in welding and related processes
TS EN ISO 11612 Protective clothing - Protective clothing against heat and flame - Minimum performance requirements
TS EN ISO 14116 Protective clothing - Protection against heat and flame - Limited flame spreading materials, material groups and clothing
TS EN 943-1 Protective clothing - Against liquid and gaseous chemicals including liquid aerosols and solid particles - Part 1: “gas-tight” (type 1) with and without ventilation, “gas-tight” (type 2), protective clothing against chemicals rules for team teams
TS EN 13594 Protective gloves for professional motorcycle riders - Rules and test methods
TS EN 62061: 2005 / A2Machine safety - Functional safety of safety-related electrical, electronic and programmable electronic control systems
TS EN 62321-1 Determination of specific substances in electrotechnical products - Part 1: Introduction and overview
TS EN 60754-1 Cables - Test section for gases released during combustion of electrical cables 1: Determination of the amount of halogen acid gas
TS EN 61034-1 / A1 Measurement of smoke density of burning cables under specified conditions - Part 1: Test device
TS EN 60754-2 Testing of gases released during combustion of materials used in cables - Part 2: determination of acidity and conductivity (by pH measurement)
TS EN 50577 Electrical cables - Fire-proof test for unprotected electrical cables (P classification)
TS EN 60332-1-1 / A1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment
TS EN 60332-1-2 / A1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame
TS EN 60332-1-3 / A1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles
TS EN 50200 Cables - Test method for fire resistance of unprotected small size cables used in emergency circuits
TS EN 60335-2-14 / A11 / AC Safety regulations - For household and similar electrical appliances - Part 2-14: Particular requirements for kitchen machines
TS EN 1420 The effect of organic substances in drinking and potable water - Evaluation of the smell and taste of water in the pipe system
TS EN ISO 16558-1 Soil quality - Risk-based petroleum hydrocarbons - Part 1: Determination of aliphatic and aromatic parts of volatile petroleum hydrocarbons using gas chromatography (static headspace method)
TS EN ISO 14460 / AC Protective clothing for motorists - Protection against heat and fire - Performance requirements and test methods
TS EN ISO 22311 Community security - Video surveillance - Export interoperability (ISO 22311: 2012)
TS EN 13731 Lift cushion systems for fire and rescue services - Safety and performance features
TS EN 15767-1 Portable equipment for directing extinguishing agents provided by fire extinguishing pumps - Portable monitors - Part 1: General rules for portable monitor assemblies
TS EN 15767-2 Portable equipment for directing extinguishing agents provided by fire extinguishing pumps - Portable monitors - Part 2: Water nozzles
TS EN 15767-3 Portable equipment for directing extinguishing agents provided by fire-fighting pumps - Portable monitors - Part 3: Foam devices
TS EN 374-2 Protective gloves against dangerous chemicals and microorganisms - Part 2: Determination of resistance to penetration
TS 13345Authorized services - Fire extinguishing systems and equipment - Rules
TS ISO 5667-20 Water quality - Sampling - Part 20: Guidance on the use of sampling data for decision making - Threshold values and compatibility with classification systems
TS EN 12972 Tanks - For the transport of dangerous goods - Test, inspection and marking of metallic tanks
TS EN 13381-3 Test methods for the determination of additives to fire resistance of structural elements - Part 3: applied protection concrete members
TS EN 60335-2-41 / A1Security rules - For household electrical appliances - Part 2-41: Particular requirements for pumps
Reference EN-ISO 389-3 Reference zero for calibration of acoustic-audiometric devices 3: Reference equivalent threshold levels for pure tones and bone vibrators
TS EN 62387 Radiation protection devices - Integrated passive dosimeter systems for monitoring persons, workspaces and the environment against photon and beta radiation
TS EN 62533 Radiation protection measuring instruments - Precision tools for photon determination of radioactive materials
TS EN 16738 Emission safety of flammable room perfumes - Test methods
TS EN 341Fall protection against falling - Rescue lowering devices
TS ISO 2023 Rubber boots - Lined industrial vulcanized rubber boots - Specifications
TS EN 13922 Tanks for the transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
TS EN 13081 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Vapor collection adapter and coupling
TS EN 13082 + A1 Tanks for the transport of dangerous goods - Service equipment for tanks - Steam transmission valve
TS EN 13315 Tanks for the transport of dangerous goods - Service equipment for tanks - Unloading connection with self-weighting
TS EN 14596 Tanks for the transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
TS EN ISO 17632 Welding consumables - Tubular flux cored electrodes for gas-shielded or unprotected metal arc welding of unalloyed and fine-grained steels
TS ISO 2023 Rubber shoes - Lined vulcanized rubber boots for industrial use - Specifications
TS EN 12845: 2015 / AC: 2016 Stationary fire extinguishing systems - Automatic sprinkler systems - design, installation and maintenance
TS EN 62484 Radiation protection measuring devices - Detection and detection of radioactive material smuggling using spectroscopy-based portal monitors
TS EN 62534 Radiation protection measuring devices - Very sensitive hand tools for the determination of the neutron
TS CEN / TR 16793 Guide for selection, application and use of flame arresters
TS EN 54-28: 2016 Fire detection and fire alarm system - Part 28: Non-resettable line type heat detectors; 2016: 54-28 EN German version
TS EN 45545-5 + A1 Railway applications - Fire protection in railway vehicles - Part 5: Fire safety requirements for electrical equipment, including trolleybus, guided bus and magnetic lifting vehicle tracking
TS EN 16683 Railway applications - Call for help and communication device - Requirements
TSE CEN / TR 16823 Railway applications - Machinist's cab - Background information for anthropometric data
TS EN 45545-2 + A1 Railway applications - Fire protection in railway vehicles - Part 2: Requirements for the fire behavior of materials and components
TSE CLC / TS 50459-3 Railway applications - Communication, signaling and processing systems - European Railway Traffic Management System - Driver - Machine interface - Part 3: Ergonomic regulation of information not within ETCS
TSE CLC / TS 50459-2 Railway applications - Communication, signaling and processing systems - European Railway Traffic Management System - Driver - Machine interface - Part 2: Ergonomic regulation of GSM-R information
TS EN ISO 17628 Geotechnical surveys and tests - Geothermal tests - Determination of thermal conductivity of soil and rock using a tube heat exchanger
TS EN 1263-1 Temporary work equipment - Safety nets - Part 1: Safety rules, test methods
TS EN 1263-2 Temporary work equipment - Safety networks - Part 2: Safety rules for positioning limits
TS EN 54-26 Fire detection and fire alarm systems - Part 26: Point fire detectors used in carbon monoxide sensors
TS EN 54-29 Fire detection and fire alarm systems - Part 29: Multiple fire detectors - Point detectors using a combination of smoke and heat sensors
TS EN 54-30 Fire detection and fire alarm systems - Part 30: Multiple fire detectors - Point detectors used in a combination of carbon monoxide and heat sensors
TS EN 54-22 Fire detection and fire alarm system - Part 22: Line type heat detectors
TS EN 15882-2 Comprehensive application of results from fire resistance tests in service facilities - Part 2: Fire dampers
TS EN 13381-9 Test methods for the determination of the contribution of fire resistance of structural elements - Part 9: Fire protection systems for web spans steel beams
TS EN ISO 14257 Acoustics - Measurements to determine the spatial sound distribution curves to evaluate the acoustic performance of the study rooms and parametric description of the spatial sound distribution curves
TS EN 12881-1 Conveyor belts - Flammability test with fire simulation section 1: Propane combustion test
TS EN 16772 Water quality - Guidelines for sampling methods from invertebrates in the hyporeic region of rivers
TS EN ISO 17943 Water quality - Determination of volatile organic compounds in water - Use of head-space solid-liquid microextraction (SPME) method following gas chromatography-mass spectrometry (GC-MS)
TS EN ISO 18635 Water quality - Determination of short chain polychlorinated paraffins (PKPs) in sediment, sewage sludge and perticular material - Gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI) method
TS EN 16623 Paints and varnishes - Reactive coatings for fire protection of metallic base materials - Definitions, requirements, specifications and marking
TS EN 16523-1 Determination of material resistance to chemical infiltration - Part 1: Liquid infiltration under continuous contact conditions
TS EN 16523-2 Determination of material resistance to leakage of chemicals - Part 2: Leakage of gaseous chemical under constant contact conditions
TS EN ISO 15549 Non-destructive testing - Eddy current inspection - General rules
TS EN 54-27 Fire detection and fire alarm systems - Part 27: Smoke duct detectors
TS EN 1947 Fire extinguishing hoses - Semi-rigid distribution hoses and hose assemblies for pumps and vehicles
TS 13723 Ultrafiltration modules - used in water treatment
TS ISO / TS 1404 Environmental management - Life cycle assessment - Data documentation format
TS ISO 18091 Quality management systems - ISO 9001 in local governments: Guidelines for the implementation of 2008
TS EN 60335-2-8 Safety regulations - For household appliances and similar - Part 2.8: Particular requirements for electric shavers, hair clippers and similar appliances
TS EN ISO 19353 Safety in machinery - Fire prevention and fire protection
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
TS EN ISO 28927-5 / A1 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
TS EN ISO 13850 Safety on machinery-Emergency stop equipment -Design principles
TS EN ISO 14123-1 Reducing health risks caused by harmful substances emitted by the machine - Machine Safety Section 1: Principles and specifications for machine manufacturers
28927-8 / A1 Hand-held portable power tools - Test methods for the assessment of vibration emissions - Part 8: Saws, polishing, filing machines and oscillating or rotary moving saws - Flange 1: Polishing machines
TS EN ISO 13849-1 Safety in machines - Safety-related parts of control systems - Part 1: General principles for design
TS EN ISO 14123-2 2: Leading methodology verification procedures - Reducing health risks caused by harmful substances emitted by the machine - Safety Section
TS EN ISO 10704 Water quality - Measurement of total alpha and beta activity concentration in salt-free water - Thin layer deposition method
TS EN ISO 10704 Water quality - Measurement of total alpha and beta activity concentration in salt-free water - Thin layer deposition method
TS EN ISO 11704 Water quality - Measurement of total alpha and beta activity concentration in unsalted water - Liquid scintillation counting counting method
TS EN ISO 13162 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method
TS EN 50625-2-2 Collection, handling and treatment requirements for Waste Electrical and Electronic Equipment - Part 2-2: Treatment requirements for Waste Electrical and Electronic Equipment including CRTs and flat panel displays
TS EN 62321-6 Determination of specific substances in electrotechnical products - Part 6: Polypromised biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry
TS EN ISO 5349-2 / A1Mechanical vibration - Measurement and evaluation of hand-held vibration to which people are exposed - Part 2: Practical guide for measuring at work
TS ISO 10155 / Cor.1 Constant source emissions - Determination of the mass concentration of particles - Automatic monitoring - Performance characteristics, test methods and properties TADİL 1
TS ISO 5660-1 Fire reaction tests - Rate of heat release, smoke formation and mass loss - Part 1: Rate of heat release (conical calorimeter method)
TS EN 54-12 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors operating with optical beam
TS EN 13384-1 Chimneys - Methods of calculation of heat and fluid dynamics - part 1: Chimneys connected to a single heating device
TS EN 1366-2 Fire resistance tests - Service fire resistance tests - Service installations - Part 2: Fire dampers
TS EN 12845 Fixed fire extinguishing systems - Automatic sprinkler systems - design, installation and maintenance
TS EN 12101-3 Smoke and heat control systems - Part 3: Reinforced smoke and heat exhaust fans
TS EN 1364-1 Fire resistance tests on non-load bearing elements section 1: Walls
TS EN 16710-2 Ergonomics methods - Part 2: A business analysis methodology for bearing design
TS EN 16710-2 Ergonomics methods - Part 2: A business analysis methodology for bearing design
TS EN ISO 9241-161 Human-system interaction ergonomics - Part 161: Guide for visual user-interface elements
TS EN 50575 / A1 Power, control and communication cables - subject to fire requirements for general applications in construction work
tst EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility Product family standard: Immune properties for components of components of fire burglar and general purpose alarm systems
tst EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility Product family standard: Immune properties for components of components of fire burglar and general purpose alarm systems
TS EN 50130-4 / tstA1 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity rules for components of fire, intrusion, panic alarm, CCTV, access control and social alarm systems
TS EN ISO 14046 Environmental management - Water footprint - Principles, requirements and guidance (ISO 14046: 2014)
TS EN ISO 14046 Environmental management - Water footprint - Principles, requirements and guidance (ISO 14046: 2014)
TS EN ISO 11268-2 Soil quality - Effects of pollutants on ground worms (Eisenia fetida / Eisenia andrei) - Part 2: Determination of reproductive effects
TS EN ISO 11268-3 Soil quality - Effects of pollutants on soil worms - Part 3: Guidance for the determination of pollutant effects in land conditions
TS EN ISO 9698 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
TS EN ISO 9698 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
tst EN ISO 14046 Environmental management - Water footprint - Principles, requirements and guidance (ISO 14046: 2014)
tst EN ISO 14046 Environmental management - Water footprint - Principles, requirements and guidance (ISO 14046: 2014)
TS EN 615 / D1 Fire protection - Fire extinguishing agents - Properties for powders (excluding class d powders)
TS EN 61882 Hazard and workability studies (HAZOP studies) - Application guide
TS EN ISO 9241-391 Human-system interaction ergonomics - Part 391: Requirements, analysis and compatibility test methods for reducing photosensitivity bouts
TSE CEN / TS 16637-3 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal gliding test
TS EN 1073-1 / AC Protective clothing against solid particles in the air including radioactive contamination - Part 1: Rules and test methods for compressed air line ventilated protective clothing that protects the body and airways
TS EN 1073-1 / AC Protective clothing against solid particles in the air including radioactive contamination - Part 1: Rules and test methods for compressed air line ventilated protective clothing that protects the body and airways
TS EN ISO 24504 Ergonomics - Barrier-free design - Sound pressure level in oral announcements for products and public announcement systems
TS EN 50136-3 Alarm systems - Alarm transmission systems and equipment - Part 3: Requirements for transceivers used in the reception center
60839-11-1 / tst AC Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and component specifications
TS EN 1994-1-2 / tstA1Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 60335-2-9 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-9: Particular requirements for roasters, grills and similar portable cooking appliances
TS ISO 37120 Sustainable development of communities - Indicators for quality of life and city services
TS EN 16034 Pedestrian door sets, industrial, commercial, garage doors and opening windows - Product standard, performance and characteristics - Fire resistance and / or smoke control features
TS ISO 13784-1 Sandwich panel construction systems - Fire reaction tests - Part 1: Test method for small rooms
TS EN 13238 Fire reaction tests of building materials - General rules and conditioning procedures for the selection of substrates
TS 3033 EN 60529 / A2The degree of protection provided by housings (IP code)
tst EN 60695-2-10 Fire hazard test - Part 2-10: Test methods based on glow / hot wire - Glow wire device and joint test procedure
tst EN 12464-2 Light and lighting - Lighting of workplaces - Part 2: Outdoor workplaces
TS EN ISO 12312-1 / A1 Eye and Face Protection-Sunglasses and similar eye products-Part 1: Sunglasses for general use
tst EN ISO 14644-1 Clean rooms and associated environments - Part 1: Classification of air purity by particle concentration
TS EN 795Fall protection - Anchor devices
TSE K 526Plate Type Fire Extinguisher
TSE K 527Cord Type Fire Extinguisher
TS EN 15269-1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 1: General rules
TS EN 15269-3 Extended application of test results for fire resistance and / or smoke control for doors, shutters and openable window components, including elements of building equipment - Part 3: Fire resistance of hinged or revolving wooden door sets and openable wooden frame windows
TS EN 15269-5: 2014 Comprehensive application of the results obtained from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 5: Glazed door sets with hinged and swiveling metal frames and opening windows fire resistance
TS EN 60695-2-12 / A1Fire hazard test - Part 2-12: Test methods based on incandescent / hot wire - Incandescent flammability index (GWFI) test method for materials
TS EN 60695-2-13 Fire hazard test - Part 2-13: Test methods based on incandescent / hot wire - Ignition temperature (GWIT) test method for materials (IEC 60695-2-13: 2010)
TS EN 60695-2-13 / A1Fire hazard test - Part 2-13: Test methods based on incandescent / hot wire - Method of ignition temperature (GWIT) test for materials with incandescent wire (IEC 60695-2-13: 2010: 1: 2014) XNUMX)
TS EN 61285 Safety of industrial-process control-analysis enclosures
TS EN ISO 12312-2 Eye and face protection - Sunglasses and similar goggles - Part 2: Filters for direct observation of the sun
TSE CLC / TS 50459-1 Railway applications - Communication, signaling and processing systems - European Railway Traffic Management System - Machinist - Machine interface - Part 1: General principles for presenting ERTMS / ETCS / GSM-R information
TS EN ISO 4126-1 / A1 Safety devices for protection against overpressure - Part 1: Safety valves (ISO 4126-1: 2013)
TS EN ISO 4126-5 / A1 Safety devices for overpressure protection - Part 5: Controlled safety pressure relief systems (csprs)
TS EN ISO 4126-7 / A1 Safety devices for overpressure protection - Part 7: Common data
TS EN 50131-2-7-1 / A2 Alarm systems - Intrusion and panic alarm systems - Part 2-7-1: Intrusion sensors - Glass breakage sensors (acoustic)
TS EN 50131-2-7-2 / A2 Alarm systems - Intrusion and panic alarm systems - Part 2-7-2: Intrusion sensors - Glass breakage sensors (passive)
TS EN 50131-2-7-3 / A2 Alarm systems - Intrusion and panic alarm systems - Part 2-7-3: Intrusion sensors - Glass breakage sensors (active)
TS EN 50194-2 / A1 Electrical apparatus for the detection of combustible gases used in buildings - Part 2: Electrical apparatus for continuous operation in a fixed installation in similar buildings with fairground vehicles - Additional test methods and performance requirements
TS EN 1794-3 Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Combustion behavior and classification of noise reducing devices
TS EN ISO 14122-1 Safety in machines-Permanent means of access to machines-Part 1: Selection of fixed means of access between two levels
TS EN ISO 7731 Ergonomics - Hazard signals for public places and workplaces - Audible hazard signals
TS EN ISO 7731 Ergonomics - Hazard signals for public places and workplaces - Audible hazard signals
TS EN 12972 Tanks - For the transport of dangerous goods - Test, inspection and marking of metallic tanks
TS EN 50553 / A1 Railway applications - Rules for the ability to work in case of fire on railway vehicles
TS EN 50575 / A1 Power, control and communication cables - subject to fire requirements for general applications in construction work
tst ISO 37120 Sustainable development of communities - Indicators for quality of life and city services
TS EN 50399 / A1 Common test methods for cables in fire environments - Measurement of smoke formation and heat output on cables during flame splash test - Test equipment, procedures, results
54: 31 + A2014: 1 Fire detection and fire alarm systems - Part 2016: Multisensor fire detectors - Point sensors using a combination of smoke, carbon monoxide and optionally heat sensors
TS EN 13501-6 Construction products and building elements - Fire classification - Part 6: Classification using data from the reactions of fire tests on electrical cables
TS EN 60754-2 Testing of gases released during combustion of materials used in cables - Part 2: determination of acidity and conductivity (by pH measurement)
TS EN 1263-1 Temporary work equipment - Safety nets - Part 1: Safety rules, test methods
TS EN 1263-2 Temporary work equipment - Safety networks - Part 2: Safety rules for positioning limits
TS EN ISO 7027-1 Water quality - Determination of turbidity - Part 1: Quantitative method
TSE CEN / TR 16928 Guidelines for the application of environmental aspects in product standards and system standards in the field of wastewater treatment engineering
TS EN 19694-1 Constant source emissions - Determination of greenhouse gas (SG) emissions in energy-intensive industries - Part 1: General dimensions
TS EN 19694-2 Constant source emissions - Determination of GHG emissions in energy-intensive industries - Part 2: Iron and steel industry
TS EN 19694-3 Constant source emissions - Determination of GHG emissions in energy-intensive industries - Part 3: Cement industry
TS EN 19694-4 Constant source emissions - Determination of greenhouse gas (SG) emissions in energy-intensive industries - Part 4: Aluminum industry
TS ISO 10381-6 Soil quality-Sampling - Part 6: Guidance for collection, transport and aerobic storage of soil for microbiological processes, biomass and diversity assessment in the laboratory
TS ISO 10381-6 Soil quality-Sampling - Part 6: Guidance for collection, transport and aerobic storage of soil for microbiological processes, biomass and diversity assessment in the laboratory
TS ISO 13794 Ambient air - Determination of asbestos fibers - Indirect transmission transmission electron microscopy method
TSE CEN / TS 16817-1 Ambient air - Monitoring of the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical ambient air sampling using a pollen mass filter (PKS) and Sigma-2-sampler
TS EN 16698 Water quality - Guidance for quantitative and qualitative sampling of phytoplankton from inland waters
TS EN ISO 13161 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
TS EN ISO 10703 Water quality - Determination of activity concentrations of radionuclides - High separation power gamma rays spectrometry method
TS EN 1628 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance under static loading
TS EN 1629 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance under dynamic loading
TS EN 1630 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance to manual theft interference
TS EN ISO 13160 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counter or proportional counter
TS EN 62321-7-1 Determination of certain substances in electrotechnical products - Part 7-1: Determination of the presence of hexavalent chromium (Cr (VI)) in color samples and color corrosion protected coatings by colorimetric method (IEC 62321-7-1)
TS EN 62080 / A2 Home and similar audio signal devices
TS EN 60695-1-11 Fire hazard test section 1-11: Guidance for fire hazard detection of electrotechnical products - Fire hazard assessment
TS EN 61472 / AC Operating live - 800 kV voltage range Minimum approach distances for 72,5 kV ac systems - calculation method
TS EN ISO 11810 Lasers and laser-related equipment - Classification and test method of laser resistance for surgical drapes and / or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
TS EN 50270 / AC Electromagnetic compatibility (emu) - Electrical equipment for the detection and measurement of flammable gases, toxic gases or oxygen
TS ISO 16000-3 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method
TS ISO 5667-17 Water quality - Sampling - Part 17: Sampling guide for suspended sediments
TS ISO 16702 Workplace air - Determination of total isosionate groups in air using 2- (1-Methoxyphenyl) piperazine and liquid chromatography
TS ISO 6107-1 Water quality - Terms and definitions - Part 1
TS ISO 6107-2 Water quality - Terms and definitions - Part 2
TS ISO 6107-2 / Amd 1: 2012 Water quality- Terms and recipes- Part 2
TS ISO 6107-5 Water quality-Terms and recipes-Part 5
TS ISO 6107-6 Water quality-Terms and recipes-Part 6
TS ISO 7176-16 Wheelchairs - Part 16: Ignition resistance of postural support equipment
TS ISO 9772 Porous plastics - Determination of the combustion properties of small test specimens exposed horizontally to a small flame
TS EN 597-2 Furniture - Determination of the flammability of upholstered bed bases and upholstered bed bases - Part 2: Combustion source - Match fire equivalent
TS EN 597-1 Furniture - Assessment of the flammability of upholstered bed bases and mattresses - Part 1: Combustion source - Smoldering cigarette
TS EN 1073-1 Protective clothing against solid particles in the air, including radioactive contamination - Part 1: Rules and test methods for compressed air line ventilated protective clothing protecting the body and airways
TS EN 1073-1 Protective clothing against solid particles in the air, including radioactive contamination - Part 1: Rules and test methods for compressed air line ventilated protective clothing protecting the body and airways
TS EN 13634 Protective footwear for motorcycle users - Specification and test methods
TS EN ISO 11665-6 Measurement of environmental radioactivity - Air: Radon-222 - Part 6: Activity concentration spot measurement method
TS EN ISO 361 Basic ionizing radiation symbol
tst EN ISO 14122-4 Safety in machinery - Permanent means of access to machinery section 4: Fixed ladders
tst EN 16831 Agriculture and forestry tractors and machinery-Safety-Accident reporting
ISO / TS 16558-2 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using flame ionisation gas chromatography (GC / FID)
TS EN 15975-1 + A1 Drinking water supply safety - Risk and crisis management guidelines - Part 1: Crisis management
TS EN 16691 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in all water samples - Use of solid phase extraction (SPE) with SPE - discs combined with gas chromatography-mass spectrometry (GC-MS)
TSE CEN / TS 16868 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for allergy networks - Volumetric Hirst method
TS EN 16693 Water quality - Determination of organochlorine pesticides (OKP) in all water samples - Method of using solid state extraction with (GK-KS) KHS-discs combined with gas chromatography mass spectrometry
TS EN 16694 Water quality - Determination of selected polybromed diphenyl ether (PBDE) in all water samples - gas chromatography - mass spectrometry (GC-MS), solid phase extraction (SPE) and SPE - discs
TS EN 16695 Water quality - Guide to the calculation of phytoplankton biomass
TSE CEN / TS 15864 Waste Characterization - Extraction behavior test for basic characterization - Dynamic monolithic extraction test with continuous liquid solution regeneration under constant conditions for the specified scenario (s)
TS EN 14662-3 Ambient air quality - Standard method for measuring benzene concentrations - Part 3: Automatic pump sampling by in situ gas chromatography
TS EN ISO 17621 Workplace atmosphere- Short-term measurement systems with detector tube-Features and test methods
TS EN 16447 Explosion-proof vane valves
TS EN ISO 10253 Water quality - Skeletonema sp. and Seaweed growth inhibition assay with Phaeodactylum tricornutum
TS EN 15051-2 + A1 Workplace exposure - Measurement of dust from bulk materials - Part 2: Rotary drum method
TS EN 16841-1 Ambient air - Determination of ambient air odor using field inspection - Part 1: Grid method
TS EN 16841-2 Ambient air - Determination of odor in ambient air using field inspection - Part 2: Smoke method
TS ISO 5658-2: 2006 / AMD 1: 2011Fire tests Response - Flame Spread - Part 2: Lateral spread on building and transport products in vertical configuration; Change 1
tst 4156-1Fire prevention in public workplaces and dwellings-Section 1: Terms, recipes and classification
tst 4156-2The fire prevention in public places and buildings- Section 2: Residential
tst 4156-3Fire prevention in public workplaces and residences-Section 3: Residential buildings
tst 4156-4Fire prevention in public workplaces and residences-Section 4: Corporate buildings
tst 4156-5Fire prevention in public workplaces and residences-Section 5: Office buildings
tst 4156-6Fire prevention in public workplaces and residences-Section 6: Commercial buildings
tst 4156-7Fire prevention in public workplaces and residences-Section 7: Industrial buildings
tst 4156-8Fire prevention in public workplaces and residences-Section 8: Buildings for assembly purposes
tst 4156-9Fire prevention in public workplaces and residences-Section 9: Buildings for transportation purposes
tst 4156-10 Fire prevention in public workplaces and residences-Section 10: Storage facilities
tst 4156-11 Fire prevention in public workplaces and dwellings - Part 11: High hazardous areas
tst 4156-12 Fire prevention in public workplaces and residences-Section 12: Buildings for mixed use
tst 4156-13 Fire prevention in public workplaces and residences-Section 13: Forests
tst 4156-14 Fire prevention in public workplaces and residences-Section 14: Road, rail and airline vehicles
TS 4156-15 Fire safety measures in public places and buildings - Part 15: Establishment of fire protection teams tasks and general rules
FIRE DETECTION AND ALARM SYSTEM FOR PASSENGER CAR VEHICLES
TSE CLC / TS 50131-12Alarm systems - Intrusion and panic alarm systems - Part 12: Methods and requirements for setting and opening Intrusion Alarm Systems (IAS)
TS EN ISO 10256-1 Head and face protection equipment for ice hockey - Part 1: General requirements
TS EN ISO 9151 Protective suit - Protection against heat and flame - Determination of heat transfer in flame exposure
TS EN 62820-1-1 Internal building communication systems - Part 1-1: System requirements - General06.02.2017
TS EN ISO 15025 Protective clothing - Flame protection - Test method for limited flame splash
TS EN ISO 15025 Protective clothing - Flame protection - Test method for limited flame splash
TS EN 50632-3-9 Electric motor-powered tools - Dust measurement - Part 3-9: Specific requirements for portable miter saws
TS EN ISO 14644-14 Clean rooms and connected controlled environments - Part 14: Evaluation of suitability for use of equipment with particle concentration in air
TS EN ISO 6385 Ergonomic principles in the design of business systems
TS EN 60332-1-2 / A11Cables - Tests in electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame spread test for a single insulated wire or cable - Process for 1 kw premixed flame
TS EN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
TS EN ISO 18674-2 Geotechnical surveys and tests - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along the line: Elongation meter
TS EN 15269-5 + A1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 5: Glazed door sets with hinged and swiveling metal frames and opening windows fire resistance
TS EN ISO 16852 Flame arresters - Performance characteristics, test methods and limits of use
TS EN 388Mechanical protective gloves
TS EN ISO 374-1 Protective gloves against dangerous chemicals and microorganisms - Part 1: Terms and performance rules for chemical risks
TS EN ISO 374-5 Protective gloves against hazardous chemicals and microorganisms - Part 5: Terms and performance rules for microorganism risks
TS EN ISO 20471 / A1 High visibility warning clothing - Test methods and characteristics - Modified 1
TS EN ISO 18589-7 Measurement of surrounding radioactivity - Soil - Part 7: In situ measurement of gamma-emitting radionuclides
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 10326: General requirements TS EN ISO 1-1
tst EN 16710-2 Ergonomics methods - Part 2: A business analysis methodology for bearing design
tst EN 16710-2 Ergonomics methods - Part 2: A business analysis methodology for bearing design
tst EN ISO 14122-1 Safety in machines-Permanent means of access to machines-Part 1: Selection of fixed means of access between two levels
TS EN ISO 14122-2 Safety in machines-Permanent means of access to machines-Part 2: Work platforms and walkways
TS EN ISO 14122-3 Safety in machines-Permanent means of access to machines-Part 3: Normal ladders, step ladders and railings
TS EN 16712-1: 2015 Portable equipment for the extension of extinguishing agents supplied by fire-fighting pumps - Portable foam equipment - Part 1: PN
TS EN 16712-2 Portable equipment for the extension of extinguishing agents supplied by fire-fighting pumps - Portable foam equipment - Part 2: Transmission pipe
TSE CEN / TS 16811-3 Winter Service Equipment and Products - Defrosting Materials - Part 3: Other Solid and Liquid Defrosting Materials - Requirements and Test Methods
TS EN ISO 12127-1 Protective clothing against heat and flame-Determination of contact heat transfer in protective clothing or materials forming part-Part 2: Contact temperature produced by heating the cylinder
TS EN 458Hearing protectors - Selection, use, advice for protection and maintenance-Guide
TS EN ISO 17491-4 / A1 Protective clothing - Test methods for clothing that protects against chemical substances - Part 4: Determination of resistance to penetration of the sprayed liquid (spray test)
TS EN 16760 Products of biological origin - Life cycle assessment
Biological products - Biological origin content - Part 16785: Determination of biological origin product content by radiocarbon analysis and elemental analysis
TSE CEN ISO / TR 9241-308 Human-system interaction ergonomics - Part 308: Surface conduction electron emitting indicators (ISO / TR 9241-308: 2008)
TSE CEN ISO / TR 9241-309 Human-system interaction ergonomics - Chapter 309: Organic light emitting diode (OLED) indicators (ISO / TR 9241-309: 2008)
TSE CEN ISO / TR 9241-310 Human-system interaction ergonomics - Part 310: Visibility, aesthetics and ergonomics of pixel defects (ISO / TR 9241-310: 2010)
TS EN 12845 Fixed fire extinguishing systems - Automatic sprinkler systems - design, installation and maintenance
TS EN 12566-7 Small wastewater treatment systems for areas up to the equivalent population (EN) of 50 - Part 7: Prefabricated tertiary treatment units
TS EN 50402 Electrical device for the detection and measurement of flammable or toxic gases or vapors or oxygen - Requirements for the functional safety of gas detection systems
TS EN ISO 15005 Road vehicles - Ergonomic aspects of transport and control systems - Contact management rules and compliance procedures
TS EN 16739 Emission safety of flammable room perfumes - Recommended emission limits and methodology for the evaluation of test results
TS EN 16740 Emission safety of flammable room perfumes - User safety information
TS EN 60839-11-2 Alarm and electronic security systems Section 11-2: Electronic access control systems - Application guide
TS EN 60839-11-2: 2015 / AC Alarm and electronic security systems Part 11-2: Electronic access control systems - Application guide
TS EN 50632-3-3 Electric motor-powered tools - Dust measurement - Part 3-3: Portable planers and thickeners
TS EN 60529: Degree of protection provided by 1991 / AC Enclosures (IP code)
TS EN 16716 Mountaineering equipment - Avalanche airbag systems - Safety requirements and methods
TS EN ISO 7029 Acoustics - Statistical distribution of hearing thresholds as a function of age and gender
TS EN 1839 Determination of limiting oxygen concentration (SOK) and explosion limits for flammable gases and vapors
TS EN 14789 Constant source emissions - Determination of the volume concentration of oxygen - Standard reference method: Paramagneticity
TS EN 14790 Constant source emissions - Determination of water vapor in chimneys - Standard reference method
TS EN 14791 Constant source emissions - Determination of the mass concentration of sulfur oxides - Standard reference method
TS EN 14792 Constant source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
TS EN 14793 Constant source emissions - Demonstration of the equivalence of an alternative method to a reference method
TS EN 15058 Constant source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: Non-dispersive infrared spectrometry
TS EN 15267-4 Air quality - Certification of automatic measuring systems - Part 4: Performance criteria for automatic measuring systems for periodic measurement of emissions from fixed sources
TS EN 50131-2-8 Alarm Systems - Intrusion and panic alarm systems - Part 2-8: Intrusion sensors - Shock sensors
TS EN 50527-1 Procedure for the evaluation of electromagnetic fields to which workers with exposed active medical devices are exposed - Part 1: General
TS EN 50527-1 Procedure for the evaluation of electromagnetic fields to which workers with exposed active medical devices are exposed - Part 1: General
TS ISO 8178-8 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 8: Determination of engine group
TSE CEN ISO / TR 7250-2 / A1 Basic human body measurements for technological design - Part 2: Statistical summary of body measurements taken from the national population
TS EN 482: 2012 + A1Commercial air - General rules for the performance of chemical processes
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for microwave ovens (including combined microwave ovens)
TS EN 60335-2-54: 2008 / A1 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2 - 54: Particular requirements for surface cleaning devices using liquids or vapors for domestic use
TS ISO 5660-1 Fire reaction tests - Heat release smoke generation and mass loss rate - Part 1: Heat release rate (conical calorimeter method) and smoke generation rate (dynamic measurement)
TS ISO 5660-2 Fire reaction tests - Rate of heat release, smoke formation and mass loss - Part 1: Rate of heat release (conical calorimeter method)
TS EN 16751 Biological products - Sustainability criteria
TS EN 16778: 2016 Protective gloves - Determination of dimethylformamide in gloves
TS EN 16733: 2016 Fire reaction tests for building materials - Determination of the tendency of building material to be exposed to continuous combustion
TS EN 6059-304 Aerospace series lekElectric cables, installation, protective sleeves - Test methods - Part 4: Flammability
TS EN 54-5Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
TS EN 54-13 Fire detection and fire alarm systems - Part 13: Compliance assessment of system components
TS EN 12101-2 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust fans
TS EN 60695-8-1 Fire hazard test - Part 8 - 1: Heat release - General guide
TS EN 60695-1-10 Fire hazard test section 1-10: Guide to the assessment of the fire hazard of electrotechnical products - General guide
TS EN 60695-8-2 Fire hazard test - Part 8 - 2: Heat release - Summary and relevance of test methods
TS EN 207Personal eye protection - Filters and eye protectors against laser radiation (laser eye protectors)
TS EN 12566-450 small wastewater treatment systems for areas up to the equivalent population (EN) - Part 4: On-site septic tanks from pre-built kits
TS EN ISO 15009 Soil quality - Gas chromatographic determination of volatile organic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Thermal stripping spraying and trap method
TS EN ISO 22155 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and some ethers - Static head gap method
TS EN 14973 Conveyor belts for use in underground installations - Safety requirements for electrical and flammability
tst EN ISO 14120 Safety in machines - Guards - General requirements for design and construction of fixed and movable guards
tst EN ISO 19353 Safety in machinery - Fire prevention and fire protection
tst EN ISO 13849-1 Safety in machines - Safety-related parts of control systems - Part 1: General principles for design
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
tst EN ISO 28927-5 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
tst EN ISO 28927-5 / A1 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
tst EN ISO 13850 Safety in machines - Emergency stop equipment - Design principles
TS HD 60364-4-41 / D1 Low voltage electrical installations - part 4 - 41: Protection for safety - Protection against electric shock
TS EN 14710-1 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 1: Classification, general and safety rules
TS EN 14710-2 + A2Fire extinguishing pumps - Non-primer centrifugal pumps for fire extinguishing - Part 2: Verification of general and safety rules
TS EN 1866-2 Portable fire extinguishers - Part 2: Requirements for the construction, compressive strength and mechanical tests of extinguishers conforming to the requirements of the EN 1866-1 standard, with a maximum permissible pressure equal to or less than 30 bar
TS EN 1866-3 Portable fire extinguishers - Part 3: Requirements for installation, construction and compressive strength of CO1866-containing extinguishers, in compliance with the requirements of the EN 1-2 standard
TS EN ISO 9241-920 Ergonomics of human-system interaction - Part 920: Tactile and haptic interactions guide
TS EN 13501-5: 2016 Construction products and building elements - Fire classification - Part 5: Classification using data obtained from the exposure of roofs to external fires
Clean rooms and their controlled environments - Part 14644: Classification of air purity by particle concentration
TS EN 60704-1 Electrical appliances for household and similar use - Test code for the determination of airborne noise - Part 1: General requirements
TS EN 14789 Constant source emissions - Determination of the volume concentration of oxygen - Standard reference method: Paramagneticity
TS EN 14790 Constant source emissions - Determination of water vapor in chimneys - Standard reference method
TS EN 14791 Constant source emissions - Determination of the mass concentration of sulfur oxides - Standard reference method
TS EN 14792 Constant source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescent
TS EN 14793 Constant source emissions - Demonstration of the equivalence of an alternative method to a reference method
TS EN 15058 Constant source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: Non-dispersive infrared spectrometry
TS EN 15267-4 Air quality - Certification of automatic measuring systems - Part 4: Performance criteria for automatic measuring systems for periodic measurement of emissions from fixed sources
TS EN 50131-2-8 Alarm Systems - Intrusion and panic alarm systems - Part 2-8: Intrusion sensors - Shock sensors
TS EN 50527-1 Procedure for the evaluation of electromagnetic fields to which workers with exposed active medical devices are exposed - Part 1: General
TS EN 50527-1 Procedure for the evaluation of electromagnetic fields to which workers with exposed active medical devices are exposed - Part 1: General
TS ISO 8178-8 Reciprocating internal combustion engines - Measuring exhaust emissions - Part 8: Determination of engine group
TSE CEN ISO / TR 7250-2 / A1 Basic human body measurements for technological design - Part 2: Statistical summary of body measurements taken from the national population
TS EN 482: 2012 + A1 General rules for the performance of processes related to the measurement of workplace air-chemicals
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for microwave ovens (including combined microwave ovens)
TS EN 60335-2-54: 2008 / A1Security rules - For household and similar electrical appliances - Part 2 - 54: Particular requirements for surface cleaning devices using liquids or vapors for domestic use
TS ISO 5660-1 Fire reaction tests - Heat release smoke generation and mass loss rate - Part 1: Heat release rate (conical calorimeter method) and smoke generation rate (dynamic measurement)
TS ISO 5660-2 Fire reaction tests - Rate of heat release, smoke formation and mass loss - Part 1: Rate of heat release (conical calorimeter method)
TS EN 16751 Biological products - Sustainability criteria
TSE CEN / TS 16916 Materials obtained from end-of-life tires - Sampling and determination of moisture content from end of life tires - using dry kiln method
TS EN 16778: 2016 Protective gloves - Determination of dimethylformamide in gloves
TS EN 16733: 2016 Fire reaction tests for building materials - Determination of the tendency of building material to be exposed to continuous combustion
TS EN 6059-304 Aerospace series lekElectric cables, installation, protective sleeves - Test methods - Part 4: Flammability
TS EN 54-5Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
TS EN 54-13 Fire detection and fire alarm systems - Part 13: Compliance assessment of system components
TS EN 12101-2 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust fans
TS EN 60695-8-1 Fire hazard test - Part 8 - 1: Heat release - General guide
TS EN 60695-1-10 Fire hazard test section 1-10: Guide to the assessment of the fire hazard of electrotechnical products - General guide
TS EN 60695-8-2 Fire hazard test - Part 8 - 2: Heat release - Summary and relevance of test methods
TS EN 207Personal eye protection - Filters and eye protectors against laser radiation (laser eye protectors)
TS EN 12566-4 Small wastewater treatment systems for areas up to the equivalent population (EN) of 50 - Part 4: septic tanks installed from pre-built kits
TS EN ISO 15009 Soil quality - Gas chromatographic determination of volatile organic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Thermal stripping spraying and trap method
TS EN ISO 22155 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and some ethers - Static head gap method
TS EN 14973 Conveyor belts for use in underground installations - Safety requirements for electrical and flammability
tst EN ISO 14120 Safety in machines - Guards - General requirements for design and construction of fixed and movable guards
tst EN ISO 19353 Safety in machinery - Fire prevention and fire protection
tst EN ISO 13849-1 Safety in machines - Safety-related parts of control systems - Part 1: General principles for design
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
tst EN ISO 28927-5 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
tst EN ISO 28927-5 / A1 Hand-held portable power tools - Test methods for measuring vibration - Part 5: Drills and impact drills
tst EN ISO 13850 Safety in machines - Emergency stop equipment - Design principles
TS HD 60364-4-41 / D1 Low voltage electrical installations - part 4 - 41: Protection for safety - Protection against electric shock
TS EN 14710-1 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 1: Classification, general and safety rules
TS EN 14710-2 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 2: Verification of general and safety rules
TS EN 1866-2 Portable fire extinguishers - Part 2: Requirements for the construction, compressive strength and mechanical tests of extinguishers conforming to the requirements of the EN 1866-1 standard, with a maximum permissible pressure equal to or less than 30 bar
TS EN 1866-3 Portable fire extinguishers - Part 3: Requirements for installation, construction and compressive strength of CO1866-containing extinguishers, in compliance with the requirements of the EN 1-2 standard
TS EN ISO 9241-920 Ergonomics of human-system interaction - Part 920: Tactile and haptic interactions guide
TS EN 13501-5: 2016 Construction products and building elements - Fire classification - Part 5: Classification using data obtained from the exposure of roofs to external fires
Clean rooms and their controlled environments - Part 14644: Classification of air purity by particle concentration
TS EN 60704-1 Electrical appliances for household and similar use - Test code for the determination of airborne noise - Part 1: General requirements
tst EN 13374 Temporary edge protection systems - Product properties, test methods
389-7 / A1 Acoustic - Reference zero for calibration of audiometric equipment - part 7: Reference hearing threshold under free and scattered listening conditions - Amendment 1: 20 Hz and 18 Hz and dispersed at 000 Hz under free listening conditions Reference hearing threshold at 20 Hz under field listening condition
TS EN 13204 Double-acting hydraulic rescue vehicles for use in fire and rescue services - Safety and performance requirements
TSE CEN / TR 16829 Protection and prevention of bucket elevators from fire and explosion
TSE CEN / TR 16829 Protection and prevention of bucket elevators from fire and explosion
TS ISO 14004 Environmental management systems - General guide for implementation
TS EN 50577 Electrical cables - Fire-proof test for unprotected electrical cables (P classification)
TS EN 60695-1-21 Fire hazard test - Part 1-3: Guidance for fire hazard detection of electrotechnical products - Flammability - Summary and suitability of test methods
TSE CEN / TR 16998 Ambient air - Report on Nitro and oxy-PAHs - Origin, toxicity, concentrations and measurement methods
TSE CLC / TS 50131-2-9 Alarm Systems - Intrusion and panic alarm systems - Part 2-9: Intrusion sensors - Active infrared ray sensors
TSE ISO / TS 5658-1 Reaction to fire tests - Spreading flames - Part 1: Guidance on spreading flames
TS EN 62618 Radiation protection devices - Personal Radiation Detectors (SPRD) that provide spectroscopy-based alarms for the detection of smuggling of radioactive material
TS EN 62694 Radiation protection devices - Backpack radiation detector (BRD) for the detection of smuggling of radioactive material
TS EN ISO 14021 Environmental labels and declarations - Self-declaration of environmental claims (Type II environmental labels)
TS ISO 4643 Shoes, plastic - Lining or uncoated poly (vinyl chloride) boots for general industry - Technical Specifications
TSE CLC / TS 50576 Electric cables - Extended applications of test results
TS EN 1496 Fall protection - Rescue lifting equipment
TS EN ISO 15008 Road vehicles - Ergonomic aspects of transport information and control systems - Features and test procedures for in-vehicle visual presentation
TS EN 60855-1 Foam-filled insulating tubes and insulating solid bars for work under stress - Part 1: Rods and tubes of circular cross-section
TSE CEN / TS 17045 Materials obtained from end-of-life tires - Quality criteria for selection of repair tires, improvement and recycling processes
TS EN 16720-1 Characterization of sludges - Physical content - Part 1: Determination of fluency - Extrusion tube apparatus method
TS EN 45544-4 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 4: Device selection, installation, operation and maintenance manual
TS EN 45544-4 Workplace air - Electrical devices for the direct detection and concentration of toxic gases and vapors - Part 4: Device selection, installation, operation and maintenance manual
TS EN 60695-1-20 Fire hazard test section 1-20: Guide for fire hazard detection of electrotechnical products - Flammability - General guide
TS EN 50545-1 / A1 Electrical equipment for the detection and measurement of toxic and flammable gases in car parks and tunnels-Part 1: General performance characteristics and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
TS EN 50244 Household electrical appliances for the detection of combustible gases - Selection, installation, operation and maintenance manual
TS 9092 ISO 10260 / D1 Water quality - Measurement of biochemical parameters - Spectrometric determination of chlorophyll-a concentration
TS 9092 ISO 10260 / D1 Water quality - Measurement of biochemical parameters - Spectrometric determination of chlorophyll-a concentration
TS EN ISO 17892-5 Geotechnical surveys and tests - Soil laboratory tests - Part 5: Odometer test by step loading
TS EN ISO 17892-6 Geotechnical studies and tests - Soil laboratory tests - Part 6: Falling cone test
TS EN ISO 17892-4 Geotechnical studies and tests - Soil laboratory tests - Part 4: Determination of grain size distribution
Industrial communication networks - Preferences - Part 61784-3: Functional safety fieldbuses - Cpf Additional features for 18 TS EN 1-3-18
TS EN 12566-1 Small wastewater treatment systems for areas up to the equivalent population (EN) of 50 - Part 1: Pre-built septic tanks
tst EN ISO 14644-2 Clean rooms and their controlled environments - Part 2: Monitoring the cleanroom performance of particulate concentration and air cleanliness for documentation purposes
TS EN 50131-5-3 Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnection equipment using radio frequency techniques
TS EN 60839-11-31 Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on web services
Alarm and electronic security systems - Part 60839-11: Electronic access control systems - Access control monitoring based on web services
TS EN ISO 9241-112 Ergonomics of human-system interaction - Part 112: Principles for the display of information
12566-6 Small wastewater treatment systems for areas up to the equivalent population (EN) - Part 50: Pre-treatment units for septic tank output
TS EN ISO 17294-2 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
TS EN ISO 9241-392 Ergonomics of human-system interaction - Part 392: Ergonomic recommendations for reducing visual fatigue caused by stereoscopic images
TS EN ISO 5667-6 Water quality - Sampling - Part 6: Guidelines for sampling of rivers and streams
TS EN ISO 5667-6 Water quality - Sampling - Part 6: Guidelines for sampling of rivers and streams
TS EN ISO 20685-2 Ergonomics - 3-D scanner methodologies for internationally compatible anthropometric databases - Part 2: Protocol for the evaluation of the surface shape and the reproducibility of the relative cue points
TS EN 13592 + A1 Plastic bags for household waste collection - types, specifications and test methods
TS EN ISO 5667-14 Water quality - Sampling - Part 14: Guidelines for quality assurance and quality control of environmental sampling and handling
TS EN 16846-1 Photocatalytic - Measurement of the efficiency of photocatalytic devices used for indoor VOC and odor removal in active mode - Part 1: Closed chamber batch test method
TS 862-7 EN 3-7 + A1 Portable fire extinguishers - part 7: Features, performance requirements and test methods
tst EN 748 / AC Playground equipment - Football goal - Functional specifications, safety rules and test methods
TS EN 2 Classes of fires
TS EN 1568-1 Fire extinguishing agents - Foam concentrates - Part 1: Specification for medium expansion foam concentrates applied to the surface of water immiscible liquids
TS EN ISO 24503: 2011 Ergonomics - Accessible design - Tactile points and sticks in consumer products
TS EN 3-9 / AC Portable fire extinguishers - Part 9: Additional requirements for pressure resistance of fire extinguishers with Co2, other than those specified in most 3-7
TS EN 2 / tst A1 pops Classes of fires
TS EN 54-2 / AC Fire detection and fire alarm systems - Part 2: Control and display equipment
TS EN 54-16 Fire detection and fire alarm systems - Part 16: Sound alarm control and indication equipment
TS EN 54-20 Fire detection and fire alarm systems - Part 20: Smoke extraction detectors
TS EN 54-2 / A1 Fire detection and fire alarm systems - Part 2: Control and display equipment
TS EN 54-24 Fire detection and fire alarm systems - Part 24: Sound alarm system components - Speakers
TS EN 54-25 Fire detection and fire alarm systems - Part 25: Components using radiolink
TS EN 54-2 / AC Fire detection and fire alarm systems - Part 2: Control and display equipment
TS EN 54-16 Fire detection and fire alarm systems - Part 16: Sound alarm control and indication equipment
TS EN 54-20 Fire detection and fire alarm systems - Part 20: Smoke extraction detectors
TS EN 54-2 / A1 Fire detection and fire alarm systems - Part 2: Control and display equipment
TS EN 54-24 Fire detection and fire alarm systems - Part 24: Sound alarm system components - Speakers
TS EN 54-25 Fire detection and fire alarm systems - Part 25: Components using radiolink
TS EN 133Breathing protection devices - Classification
TS EN 135Breathing devices - List of equivalent terms
TS EN 143 Protective breathing apparatus-Dust strainers-Features, tests and marking
TS EN 143 / A1 Protective breathing apparatus - Dust strainers - specifications, tests and marking
TS EN 144-1 Respiratory protection devices - Gas cylinder valves - Part 1: Screw connections for plug-in fittings
TS EN 144-1 / A2 Respiratory protection devices - Gas cylinder valves - Part 1: Screw connections for plug-in fittings
TS EN 145 Respiratory protective devices - Self-contained closed-circuit breathing apparatus, pressurized oxygen or pressurized oxygen-nitrogen type-Specifications, tests, marking
TS EN 148-2 Respiratory protection devices - Thread for face protection parts - Part 2: Connection with central thread
TS EN 149 + A1 Respiratory protection devices - Filter half masks for particulate protection - Specification, tests and marking
TS EN 172Personal eye protection - Sun protection filters - For industrial use
TS EN 174 Personal eye protection - Skiing goggles for Alpine skiing
TS EN 342Protective clothing - Clothing sets and components for protection against cold
TS EN 342 / AC Protective clothing - Clothing sets and components for protection against cold
TS EN 343 + A1 Protective clothing - Rain protection
tst EN 343 + A1 Protective clothing - Rain protection
TS EN 348 / tst AC Protective suit - Test method; Determination of material behavior against splashing of molten metal parts
TS EN 348 / AC Protective suit - Test method; Determination of material behavior against splashing of molten metal parts
TS EN 352-2 Hearing protectors - General rules - Part 2: Ear plugs
TS EN 352-6 Hearing protectors - Safety rules and tests - Part 6: Earplugs with electrical sound input
TS EN 352-1 Hearing protectors - General rules - Part 1: Earplugs
TS EN 352-4 Hearing protectors - Safety rules and tests - Part 4: Level-dependent ear plugs
TS EN 352-5 / A1 Hearing protectors - Safety rules and tests - Part 5: Ear muffs that reduce active noise
TS EN 352-7 Hearing protectors - Safety rules and tests - Part 7: Level-dependent ear plugs
TS EN 352-4 / A1 Hearing protectors - Safety rules and tests - Part 4: Level-dependent ear plugs
TS EN 352-8 Hearing protectors - Safety rules and tests - Part 8: Entertainment radio headphones
TS EN 353-2 Personal protective equipment - Falling from height - Part 2: Guided anti-fall type with flexible anchor rope
TS EN 354: 2010 Personal protective equipment - against falling from a certain height - Fastening device
TS EN 355Personal protective equipment - Falling from height - Energy absorbers
TS EN 356Safety glasses - Used in buildings - Testing and classification of hand impact resistance
TS EN 352-3 Hearing protectors-General rules-Part 3: Protective headphones fitted to an industrial safety helmet
TS EN 358 Personal protective equipment - To ensure working safety at a certain height and to prevent falling - Holding systems, belts and ropes for working position
TS EN 361Personal protective equipment - To fall from a certain height - Full-body belt systems
TS EN 363 Personal fall protection - Personal fall protection
TS EN 365 Personal protective equipment against falling from a height - General instructions for use, maintenance, periodic inspection, repair, marking and packaging
tst EN 367 / AC Protective suit - Protection against heat and flame - Determination of heat transfer in flame exposure
TS 377-10 EN 12953-10 Cylindrical boilers - Part 10: Specifications for feed water and boiler water quality
TS EN 379 + A1 Personal eye protection - Automatic welding filters
TS EN 381-11 Protective clothing - For users of chain saws - part 11: Rules for upper body protectors
TS EN ISO 389-3 (Formerly: TS ISO 389-3) Reference zero for calibration of acoustic-audiometric devices Part 3: Reference equivalent threshold strength levels for pure tones and bone vibrators
ISO EN ISO 389-4 Acoustics - Reference levels for calibration zero reference narrowband noise marking section 4:
TS EN ISO 389-6 Zero reference for calibration of acoustic-audiometric equipment-Hearing threshold for short-term test signals
TS EN ISO 389-9 Reference zero (0) section for calibration of acoustic-audiometric equipment 9: Preferred test conditions for the determination of reference hearing threshold levels
TS ISO 389-3: 1997 / T1 (Number modified, TS EN ISO 389-3) Reference zero for calibration of acoustic-audiometric devices Zero-Part 3: Reference equivalent threshold strength levels for pure tones and bone vibrators
TS EN ISO 389-7 Acoustics - Reference zero for the calibration of audiometric equipment - part 7: Reference hearing threshold under free and scattered listening conditions
TS EN ISO 389-5 Reference zero for calibration of acoustic audiometry-related equipment Part 5: Reference equivalent threshold sound pressure levels for pure tones in the 8 khz- 16 khz frequency range
ISO EN ISO 389-8 Acoustics - Reference zero for audiometric hardware calibration - Part 8: Reference equivalent threshold sound pressure levels for pure tones and earbuds
TS EN 402Breathing apparatus - Self-contained open-circuit breathing apparatus with full-face mask or mouthpiece, compressed air using compressed air, for escape - Rules, tests, marking
TS EN 403 Respiratory protection devices - For self-rescue - Filter devices with nozzle used for escape from fire - Rules, tests, marking
TS EN 404 Respiratory protective devices - For self-rescue - Filter self-rescue device with mouthpiece assembly against carbon monoxide
tst EN 421Protective gloves - Against ionizing radiation and radioactive contamination
tst EN 421 Protective gloves - Against ionizing radiation and radioactive contamination
TS EN 443 Protective caps for fire fighting in buildings and other structures
TS EN 481 Workplace atmosphere-Size fraction recipes for particle measurements in air
TS EN 511 Protective gloves against cold
TS EN 547-2 + A1 Safety in machinery-Human body measurements-Part 2: Rules for determining the required dimensions for access openings
TS EN 547-2 + A1 Safety in machinery-Human body measurements-Part 2: Rules for determining the required dimensions for access openings
TS EN 547-3 + A1 Safety in machines-Human body measurements - Anthropometric data
TS EN 547-3 + A1 Safety in machines-Human body measurements - Anthropometric data
TS EN 659 + A1 Protective gloves - for firefighters
TS EN 659 + A1 / AC Protective gloves for firefighters
TS EN 805Su supply - Specification for outdoor components and systems
TS EN 838 Workplace air-Specifications and test methods for the determination of gases and vapors with diffusion sampling devices
tst EN 840-6 + A1 Mobile waste containers - Part 6: Health and safety regulations
TS EN 858-1 Separation systems for light liquids (eg oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
TS EN 872 Water quality - Determination of suspended solids - Filtration method using glass fiber filters
TSE-EEC R 880 / 92 Environmental management - European Community environmental conformity certificate (EIA)
TS EN 894-1 + A1 Safety in machines - Ergonomic rules for the design of the displays and the control drive section 1: General principles for interaction between the display and control drive and human
TS EN 894-1 + A1 Safety in machines - Ergonomic guidelines for the design of the displays and the control drive section 1: General principles for interaction between the display and control drive and human
TS EN 894-3 + A1 Safety in machines - Ergonomic requirements for the design of the displays and control drives - Part 3: Control drives
TS EN 894-3 + A1 Safety in machines - Ergonomic requirements for the design of the displays and control drives - Part 3: Control drives
TS EN 943-2 Protective clothing - Against liquid and gaseous chemicals including liquid aerosols and solid particles - Part 2: Gas-tight (type 1) for emergency crews (ae), performance characteristics of chemical protective clothing
tst EN 999 + A1 Safety in machines - Installation of protective equipment according to the approach speed of the body parts
tst EN 999 + A1 Safety in machines - Installation of protective equipment according to the approach speed of the body parts
TS EN 1005-2 + A1 Safety in machinery - Physical performance of man - Part 2: Manual handling and storage of machinery and machine components
TS EN 1005-2 + A1 Safety in machinery - Physical performance of man - Part 2: Manual handling and storage of machinery and machine components
TS EN 1005-3 + A1 Safety in machinery - Physical performance of man - Part 3: Recommended force limits when using machines
TS EN 1005-3 + A1 Safety in machinery - Physical performance of man - Part 3: Recommended force limits when using machines
TS EN 1005-4 + A1 Safety in machinery - Physical performance of man - Part 4: Assessment of body postures and movements during operation according to the machine
TS EN 1005-4 + A1 Safety in machinery - Physical performance of man - Part 4: Assessment of body postures and movements during operation according to the machine
TS EN 1005-5 Safety on machinery - Human physical performance - part 5: Risk assessment for high frequency repetitive handling and storage
TS EN 1005-5 Safety on machinery - Human physical performance - part 5: Risk assessment for high frequency repetitive handling and storage
TS EN 1028-1 + A1 Fire fighting pumps - Primary centrifugal pumps for fire fighting - part 1: Classification-General and safety rules
TS EN 1063 Safety glasses - Used in buildings - Testing and classification of bullet resistance
TS EN 1076 Workplace air-Pumped sorbent tubes for the determination of gases and vapors-Features and test methods
TS EN 1077 Helmets for Alpine skiers and one-piece snow skiers
TS EN 1082-1 Protective clothing - Protective gloves and sleeves against knife cuts and sinking - Part 1: Gloves and sleeves made of chain armor
TS EN 1082-1 Protective clothing - Protective gloves and sleeves against knife cuts and sinking - Part 1: Gloves and sleeves made of chain armor
TS EN 1082-2 Protective clothing - Protective gloves and sleeves against knife cuts and sinking - Part 2: Gloves and sleeves made of non-chain armor
TS EN 1082-2 Protective clothing - Protective gloves and sleeves against knife cuts and sinking - Part 2: Gloves and sleeves made of non-chain armor
TS EN 1082-3 Protective clothing - Protective gloves and sleeves against knife cuts and sinking - Part 3: Impact cutting test for fabrics, leather and other materials
TS EN 1082-3 Protective clothing - Protective gloves and sleeves against knife cuts and sinking - Part 3: Impact cutting test for fabrics, leather and other materials
tst EN 1089-2 Portable gas cylinders-Tube designation (excluding lpg) section 2: Warning labels
TS EN 1093-4 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 4: Efficiency of holding an exhaust system - tracer method
TS EN 1093-3 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 3: Measurement of emission rate for a given pollutant by laboratory test method
TS EN 1093-3 + A1 Safety in machinery - Emission assessment of airborne hazardous substances - Part 3: Measurement of emission rate for a given pollutant by laboratory test method
TS EN 1093-6 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 6: Mass separation efficiency with duct-free outlet
TS EN 1093-8 + A1 Safety in machinery - Evaluation of emissions of dangerous substances carried by air - Part 8: Pollutant concentration parameter, test bench method
TS EN 1093-11 + A1 Safety in machinery - Assessment of emissions of dangerous substances carried by air - Part 11: Pollutant removal index
TS EN 1093-7 + A1 Safety in machinery - Evaluation of emissions of airborne hazardous substances - Part 7: Mass separation efficiency, ducted outlet
TS EN 1101 / A1 Textiles and textile products-Combustion property-Hall curtains and curtains-Detailed method for the determination of flammability of vertical test specimens (small flame)
TS EN 1101 Textiles and textile products-Combustion property-Hall curtains and curtains-Detailed method for determination of flammability of test specimens in vertical position (small flame)
TS EN 1146 Respiratory protection devices - Self-contained open-circuit compressed air respirator with escape hood - Rules, test, marking
TS EN 1147: 2010 Portable Ladders - Used in Fire
TS EN 1149-2 Protective clothing - Electrostatic properties - Part 2: Test method for measuring the electrical resistance to the depth of the material (vertical resistance)
TS EN 1149-3 Protective clothing - Electrostatic properties - Part 3: Test method for measuring load attenuation "
TS EN 1149-1 Protective clothing - Electrostatic properties - Part 1: Surface resistivity (test methods and rules)
TS EN 1149-5 Protective gloves - Electrostatic properties - Part 5: Material performance and design characteristics
TS EN 1150 Protective clothing - Visible clothing for non-professional use - Test methods and features
TS EN ISO 1182b The reaction of building products to fire tests - Flammability test
TS EN 12101-10 Smoke and heat control systems - Part 10: Power supplies
TS EN 1233 Water quality - Determination of chromium - Atomic absorption spectrometric methods
TS EN 1233 Water quality - Determination of chromium - Atomic absorption spectrometric methods
TS EN 1317-2 Road safety systems - part 2: Performance classes for safety barriers including vehicle parapets, impact test acceptance criteria and test methods
TS EN 1317-3 Road safety systems - Part 3: Performance classes for impact pads, impact test acceptance criteria and test methods
TS EN 1363-2 Fire resistance tests - Part 2: Alternative and additional procedures
TS ENV 1363-3 Fire resistance tests - Part 3: Verification of furnace performance
TS EN 1364-2 Non-load bearing elements - Fire resistance tests - Part 2: Ceilings
TS EN 1365-4 Fire resistance test of structural elements - Part 4: Columns
TS EN 1365-5 Fire resistance tests for load-bearing elements - Part 5: balconies and sidewalks "
TS EN 1365-6 Fire resistance tests for load-bearing elements - Part 5: ladders "
TS EN 1366-6 Fire resistance tests for service installations - part 6: Raised and six empty floors
TS EN 1366-8 Fire resistance tests for service installations - part 8: Smoke vents
TS EN 1366-3 Fire resistance tests for service installations - Part 3: Service transition seals
TS EN 1366-9 Fire resistance test for service installations - Part 9: Single-chamber smoke extraction ducts
TS EN 1366-10: 2011 Fire resistance tests for service installations - Part 10- Smoke control dampers
TS EN 14652 + A1 Indoor water treatment equipment - Membrane separation devices - Performance, safety and test rules
TS EN 1498 Rescue equipment - Rescue rings
TS EN 1508 Water supply - Characteristics of water storage systems and components
TS EN 1508 Water supply - Characteristics of water storage systems and components
TS EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for the analysis of smoke particles
tst EN ISO 15011-1 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 1: Determination of emission rate and sampling for analysis of smoke particles
TS EN ISO 1522 Paints and varnishes - Pendulum damping test
TS EN 1523 Window, door - Shutters and shutters - Bullet resistance - Test method
TS EN 1566-1 Plastic pipe systems - Used for disposal of cold and hot water in buildings - Part of chlorinated polyvinylchloride (pvc-C) 1: Pipes, fittings and system properties
TS EN 1622 Water analysis- Determination of odor number threshold (ked) and taste number threshold (ted)
TS EN 1625 Textile and textile products - Industrial and technical textile products - Combustion property - Determination of flammability of vertical samples
TS EN 1634-2 Fire resistance tests - Doors and shutters - Part 1: Fire resistance and smoke control tests for doors, shutters and shutters and building hardware components - Part 2: Test for characterization of fire resistance
TS EN 1717 General features of pollution prevention devices for protection against contamination of drinking water in the water installation and backflow
TS 1753 EN ISO 1516 Determination of flash point - Closed cup balance method
TS EN 1760-3 + A1 Safety in machines - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and rods
tst EN 1777 Hydraulic platforms used in fires (hps) Safety rules and test methods
TS EN 1777 Hydraulic platforms used in fire fighting and rescue services (HPs) - Safety rules and test methods
TS EN 1822-1 Air filters - High efficiency (epa, hepa and ulpa) - Part 1: Classification, performance test and marking rules
TS EN 1822-2 Air filters - High efficiency (epa, hepa and ulpa) - Part 2: Aerosol production, measuring equipment, particle counting statistics
TS EN 1822-3 Air filters - High efficiency (epa, hepa and ulpa) - Part 3: Test of flat plate filter screening
TS EN 1822-4 Air filters - High efficiency (epa, hepa and ulpa) - Part 4: Determination of the tightness of the filter element (screening method)
TS EN 1822-5 Air filters - High efficiency (epa, hepa and ulpa) - Part 5: Determination of the efficiency of the filter element
TS EN 1866-1 Portable fire extinguishers - part 1: Characteristics, performance and test methods
TS EN 1869 Fire blankets
TS EN 1869 / T1 Modified fire blankets 1
TS EN 1948-1 Constant source emissions- Determination of mass concentrations of Pcdds / pcdfs-Part 1: Sampling
TS EN 1948-2 Constant source emissions-Determination of mass concentrations of Pcdds / pcdfs-Part 2: Extraction and cleaning
TS EN 1948-3 Constant source emissions- Determination of mass concentrations of Pcdds / pcdfs-Part 3: Identification and quantitative determination
TS EN 1987-3 Road vehicles - Electrically operated - Particular requirements for safety - Part 3: Protection of users against electrical hazards
TS EN 1992-1-2 Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
TS EN 1993-1-2 Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1093-1 Safety in machinery - Emission assessment of airborne dangerous substances - Part 1: Selection of test methods
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS EN 1995-1-2 Eurocode 5: Design of wooden structures section 1-2: General rules - Design of structural fire
TS EN 1996-1-2 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 1999-1-5 Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)
TS 2575 EN 60073 Coding principles for display devices and actuators - Human-machine interface, basic and safety principles for marking and identification
TS 2607 ISO 1999 Acoustics - Determination of exposure to workplace noise and estimation of hearing loss caused by this noise
TS 2627 EN ISO 6468 Water quality - Determination of some organochlorinated insecticides, polychlorinated biphenyls and chlorobenzenes - Liquid - Gas chromatography after liquid extraction
TS 2627 EN ISO 6468 Water quality - Determination of some organochlorinated insecticides, polychlorinated biphenyls and chlorobenzenes - Liquid - Gas chromatography after liquid extraction
tst EN ISO 2789 Information and documentation - International library statistics
TS EN ISO 28927-3 Hand-held portable power tools - Test methods for measuring vibration - Part 3: Polishing and rotary, smooth or variable orbit abrasives
TS EN ISO 3211 Aluminum and aluminum alloys-Anodic oxide coating deterioration crack resistance
TS EN 3475-407 Aerospace series-Test methods for cables, electrical and aircraft use-Part 407-Flammability
TS EN 3523 Hearing protectors - General features - Part 3: Headphones with protective helmet connection
TS EN 3525 Hearing protectors - Safety rules and testing - Part 5: Active noise-reducing headphones
TS EN 3532 Personnel protection against falling from a certain height - Part 2: Guided drop guard with a flexible connecting line
TS EN ISO 3582 / A1 Flexible porous polymeric materials - Laboratory evaluation of horizontal combustion properties of small test specimens exposed to a small flame
TS 3651 ISO 6332 Water quality-Determination of iron-Spectrometric method with 1,10-Phenanthroline
TS 3790 EN ISO 9963-1 Water quality-Alkaline determination part 1: Determination of total and compound alkalinity
TS ISO 3795 Road vehicles, agricultural and forestry machinery and tractors - Determination of combustion behavior of internal materials
TS ISO 3930 Exhaust emission measuring instruments for road vehicles
TSE ISO / TR 3956 Structural fire engineering design principles - Based on the relationship between actual fire exposure and standard fire resistance test heating conditions
TS EN ISO 4126-2 Safety devices for protection against overpressure - Part 2: Safety devices with explosion discs
TS EN ISO 4126-2 / AC Safety devices for overpressure protection - Part 2: Safety devices with explosion discs
TS EN ISO 4126-3 Safety devices for protection against overpressure - Part 3: Safety valves with integrated relief valve and bursting disc
TS 4182 EN ISO 9963-2 Water quality-Determination of alkalinity-Part: Determination of 2 carbonate alkalinity
TS 4182 EN ISO 9963-2 Water quality-Determination of alkalinity-Part: Determination of 2 carbonate alkalinity
TS EN 420 + A1 Protective gloves - General specifications and test methods
TS 11959 ISO 4224 Ambient air - Determination of carbon monoxide - Non-dispersive infrared spectrometry method
TSE ISO / TR 4227 Environmental air quality monitoring plan
TS 4234 ISO 10359-1 Water quality-Determination of fluoride-Part 1: Electrochemical probe method for potable and slightly contaminated water
TS 4234 ISO 10359-1 Water quality-Determination of fluoride-Part 1: Electrochemical probe method for potable and slightly contaminated water
TS 4254 ISO 4225 Air quality terms
TS EN ISO 4589-2 / A1 Plastics - Determination of combustion properties by oxygen index - Part 2: Determination of ambient temperature
TS EN 4649 Aviation series - Hand-held fire extinguishers containing synthetic gases, for use in aircraft - Technical specifications and qualification requirements
TS EN ISO 4869-2 / ACAcoustics - Ear protectors - Part 2: Estimation of effective a-Weighted sound pressure levels when ear protectors are worn
TS 4957-1 EN 1899-1Su quality - Determination of biochemical oxygen demand after N days (Boin) - Part 1: Inoculation method with dilution and addition of allithiourea
TS 4957-1 EN 1899-1 Water quality - Determination of biochemical oxygen demand after day (Boin) - Part 1: Inoculation method with dilution and addition of allithiourea
TS EN ISO 5667-1 Water quality - Sampling - Part 1: Guidance on the design of sampling programs and sampling techniques
TS EN 15182-3 + A1 Hand-held water spray guns for fire fighting purposes - Part 3: Pn-type straight-hole sprinkler and / or fixed spray angle water spray gun
TS EN ISO 5349-1 Mechanical vibration - Measurement and evaluation of hand-held vibration to which persons are exposed - Part 1: General rules
TS EN ISO 5349-2 Mechanical vibration - Measurement and evaluation of hand-to-body vibration of persons - part 2: Practical guide for measuring at work
TS 5489 EN ISO 7393-1 Water quality-Determination of free chlorine and total chlorine-Part 1: N, n-Diethyl-1,4-Titrimetric method besides phenylenediamine
TS 5489 EN ISO 7393-1 Water quality-Determination of free chlorine and total chlorine-Part 1: N, n-Diethyl-1,4-Titrimetric method besides phenylenediamine
TS 5558 EN 168 Personal eye protection - Non-optical test methods
TS ISO 5667-10 Water quality - Sampling - Part 10: Sampling guide for wastewater
TS ISO 5667-10 Water quality - Sampling - Part 10: Sampling guide for wastewater
TS ISO 5667-7 Water quality - Sampling section 7: Water and steam sampling guide for boiling systems
TS ISO 5667-8 Water quality - Sampling - Part 8: Rainfall sampling guide
TS EN ISO 5667-16 Water quality - Sampling - Part 16: Guidance on sample bioassays
TS EN ISO 5667-15 Water quality-Sampling-Section 15: Guide for the protection and transport of sludge and sediment samples (iso 5667-15: 2009)
TS EN ISO 5667-15 Water quality-Sampling-Section 15: Guide for the protection and transport of sludge and sediment samples (iso 5667-15: 2009)
TS EN ISO 5667-15 Water quality-Sampling-Section 15: Guide for the protection and transport of sludge and sediment samples (iso 5667-15: 2009)
EN ISO 5667-1 / tst AC Water quality-Sampling-Section 1: Rules for preparing sampling programs
TS ISO 5667-5 Water quality - Sampling - Part 5 - Sampling guide for drinking water in treatment plants and pipeline distribution systems
TS ISO 5667-5 Water quality - Sampling - Part 5 - Sampling guide for drinking water in treatment plants and pipeline distribution systems
TS EN ISO 5667-19 Water quality - Sampling - Part 19: Guide to sampling marine sediments
TS EN ISO 5667-19 Water quality - Sampling - Part 19: Guide to sampling marine sediments
TS EN ISO 5667-13: 2011 Water quality- Sampling- Section 13: Sludge sampling guide
TS EN ISO 5667-13: 2011 Water quality- Sampling- Section 13: Sludge sampling guide
TS ISO 5805 Mechanical vibration and shock - Human exposure - Terms and definitions
TS EN ISO 5961 Water quality-Cadmium determination-Atomic absorption method
TS EN ISO 5961 Water quality-Cadmium determination-Atomic absorption method
TS ISO 5982 Mechanical vibration and shock-ideal range of values characterizing the biodynamic response of the person sitting under vertical vibration
TSE ISO / TR 5987 Aqueous fire extinguishing systems - Fire hose couplings used in domestic water transport - General technical specifications
Water quality - Determination of acute lethal toxicity of substances on a freshwater fish [Brachydanio rerio hamilton- Buchanan (teleostei, cyprinidae)] - Part 6022: Continuous flow method
TS ISO 6107-9 Water quality-Terms and recipes-Section 9: Alphabetical list and topic index
tst ISO / TR 6167 Fire resistance tests - Supporting suspended ceilings for the protection of steel beams in floor and roof construction
TS ISO 6182-5 Fire protection-Automatic sprinkler systems - Part 5: Specification and test methods for sprinkler valves
TS EN ISO 6222 Water quality - Count of culturable microorganisms - Colony count by inoculation on agar media
TS 6227 ISO 6439 Water quality - Determination of phenol index - Spectrometric methods using 4-Aminoantipyrine after distillation
TS 6228 EN ISO 7980 Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
TS 6228 EN ISO 7980 Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
TS 6229 EN ISO 7393-2 Water quality - Determination of free chlorine and total chlorine - Part 2: For routine controls - N, n - Diet - 1,4 - Colorimetric method using phenylenediamine
TS 6230 EN ISO 7393-3 Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for determination of total chlorine
TS ISO 6460-1 Road vehicles - Motorcycles - Method for measuring gas emissions and fuel consumption - Part 1: General rules for testing
TS ISO 6460-2 Road vehicles-Motorcycles-Method of measuring gas emissions and fuel consumption-Part 2: Test steps and special test conditions
TS ISO 6460-3 Road vehicles-Motorcycles-Method for measuring gas emissions and fuel consumption-Part 3: Measurement of fuel consumption at constant speed
TS EN ISO 6529 Protective clothing - Protection against chemical substances - Determination of resistance of protective clothing materials to the passage of liquid and gas
TS EN ISO 6530 Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to liquid penetration
tst 6550 EN 903 (Priority 6) Water quality-Determination of surfactants-Part1: Determination of anionic surfactants by measuring methylene blue index.
tst 6550 EN 903 (Priority 6) Water quality-Determination of surfactants-Part1: Determination of anionic surfactants by measuring methylene blue index.
TS 6860 EN 175 Personnel protection - Eye and face protection equipment during welding and similar operations
TS EN ISO 6878 Water quality-Phosphorus determination-Ammonium molybdate spectrometric method
TS ISO 6879 / tst T 1 Air quality - Performance characteristics and related concepts for air quality measurement methods (name modification)
TS EN ISO 6942 Protective clothing - Protection against heat and fire - Test method: Evaluation of material and material combinations when exposed to radiated heat sources
TS 6999 EN ISO 3582 Flexible porous polymeric materials-Laboratory evaluation of horizontal combustion properties of small test specimens exposed to a small flame
TS EN ISO 7096 / AC Construction and excavation machinery - Laboratory evaluation of operator seat vibration
TS EN ISO 7096 Construction and excavation machinery - Laboratory evaluation of operator seat vibration
TS EN ISO 7250-1 Basic human body measurements for technological design - Part 1: Body measurement recipes and markings
TS ISO 7503-1 Surface contamination assessment - Part 1: Beta- Emitters (highest beta energy greater than 0,15 mev) and alpha emitters
TS ISO 7503-2 Surface contamination assessment section 2-Tritium surface contamination
TS ISO 7503-3 Evaluation of surface contamination - Part 3: Isomeric transition and electron capture emitters, low energy beta emitters (ebmax <0,15 mw)
TS EN ISO 7730 Medium thermal media - Determination of Pmv and ppd indices Determination of conditions for thermal comfort
TS EN ISO 7731 Ergonomics - Hazard signals for public places and workplaces - Audible hazard signals
TS EN ISO 7731 Ergonomics - Hazard signals for public places and workplaces - Audible hazard signals
TS EN ISO 7822 Textiles - Determination of the void content of glass-reinforced plastics-Glow loss, mechanical separation and statistical counting methods
TS ISO 7890-3 Water quality - Determination of nitrate - Part 3: Spectrometric method using sulfosalicylic acid
TS ISO 7890-3 Water quality - Determination of nitrate - Part 3: Spectrometric method using sulfosalicylic acid
TS EN ISO 7899-2 Water quality - Detection and counting of intestinal enterococci - Part 2: Membrane filtration method
TS ISO 7934 Constant source emissions-Determination of sulfur dioxide mass concentration-Hydrogen peroxide / barium perchlorate / thorin method
TS ISO 7935 Spot source emissions - Determination of mass concentration of sulfur dioxide - Performance characteristics of automatic measurement methods
TS ISO 7996 Ambient air - Determination of mass concentration of nitrogen oxides - Chemiluminescence method
TS 8019 EN 26461-1 Water quality-Detection and enumeration of sulphide reducing anaerobe spores (Section 1)
TS EN ISO 8041 Human response to vibration - Measuring device
TS EN ISO 8041 / AC Human response to vibration - Measuring device
TSE ISO / TR 9122-6 Toxicity testing of fire products - Part 6: Guidelines for regulatory and regulatory assessments of toxicity hazard in buildings and transport
TS ISO 8178-6 (Ex: TS EN ISO 8178-6) Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Measurement results and test report
TS ISO 8178-3 Reciprocating internal combustion engines - Measurement of exhaust emissions - Part 3: Definitions and methods for measuring exhaust gas fumes in steady state
TS ISO 8186 Environmental air- Determination of carbon monoxide mass concentration- Gas chromatographic method
TS EN ISO 8192 Water quality-Activated sludge oxygen consumption inhibition test
TS 8195 EN 1484 Water quality - Total organic carbon (full) and dissolved organic carbon (multi) determination guide
TS 8195 EN 1484 Water quality - Total organic carbon (full) and dissolved organic carbon (multi) determination guide
TS EN 15182-2 + A1 Hand-held water spray guns for fire fighting purposes - Part 2: Pn Combination of 16 type water spray guns
TS EN ISO 8253-2 Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure tone and narrow band test signals
TS ISO 8421-4 Fire protection-Terms and definitions-Section 4: Fire extinguisher
TS 6288 EN ISO 8467 Determination of water quality-Permanganate index
TS 8488 EN ISO 12020 (Formerly: TS 8488 ISO 12020) Water quality-Determination of aluminum-Atomic absorption spectrometric methods
TS 8488 EN ISO 12020 (Formerly: TS 8488 ISO 12020) Water quality-Determination of aluminum-Atomic absorption spectrometric methods
TS 8488 ISO 12020: 1998 / T1 (Number modification, TS 8488 EN ISO 12020) Water quality-Determination of aluminum-Atomic absorption spectrometric methods
TS ISO 8518 Workplace air - Determination of lead and lead compounds in particulates - Flame or electrothermal atomic absorption spectrometric method
TS EN ISO 8689-1 Water quality-Biological classification of rivers-Section 1: Guidance for interpretation of biological quality data from river bottom macroinvertebrates
TS EN ISO 8689-1 Water quality - Biological classification of rivers - Part 1: Guidelines for the interpretation of biological quality data obtained from the study of river bottom macro invertebrates
TS EN ISO 8689-2 Water quality-Biological classification of rivers-Section 2: Guidance for the presentation of biological quality data from river bottom macroinvertebrates
TS 8743 EN 27201-1 Fire protection - Extinguishing media - Halogenated hydrocarbons - Part 1: Halon 1211 and halon 1301- Specifications
TS 8754 ISO 8165-1 Water quality-Determination of some monophenols-Part 1: Gas chromatographic method after extraction enrichment
TS 8754 ISO 8165-1 Water quality-Determination of some monophenols-Part 1: Gas chromatographic method after extraction enrichment
TS ISO 8761Operation air - Determination of nitrogen dioxide mass concentration - Method of detector tubes for short-term sampling with direct indication
TS ISO 8853 Safety belts for motorists - Features and test methods
TS EN ISO 8980-2 / AC Optics - Eye-related - Uncut, ready-to-use eyeglass lenses - Part 2: Specifications for improved power lenses
TS EN ISO 8996 Thermal environment ergonomics - Determination of metabolic rate
TS 9092 ISO 10260 Water quality-Measurement of biochemical parameters-Spectrometric determination of chlorophyll-A concentration
TS 9092 ISO 10260 Water quality-Measurement of biochemical parameters-Spectrometric determination of chlorophyll-A concentration
TSE ISO / TR 9122-1 Toxic testing of products resulting from fire - Part 1: General
TSE ISO / TR 9122-2 Toxicity test for products resulting from fire - Part 2: Guidance on biological tests (basic principles, criteria and methodology) for determining the toxicity of products resulting from fire by inhalation
TSE ISO / EN 9122-6 / T1 Toxicity test of fire products - Part 6: Guidance for regulatory and regulatory assessing toxicity hazard in buildings and transport (amended 1)
TSE ISO / TR 9122-1 / T1 Toxicity test of products resulting from fire - Part 1: General (modified 1)
TSE ISO / TR 9122-2 / T1 Toxicity test for products resulting from fire - Part 2: Guidance on biological tests (basic principles, criteria and methodology) for determining the toxicity of products caused by fire (modified principles 1)
TS EN ISO 9169 Air quality - Measurement methods - Determination of performance characteristics
TS EN ISO 9185 Protective clothing - Evaluation of the resistance of molten metal splashes
TS EN ISO 9241-1 Ergonomic features for office work with visual display terminals (vdt) - Part 1: General introduction
TS EN ISO 9241-4 Ergonomic features of office work with visual display terminals (vdt) section 4: Keyboard features
TS EN ISO 9241-5 Ergonomic features for office work with visual display terminals (vdt) - Part 5: Features for workstation arrangement and layout
TS EN ISO 9241-11 Ergonomic features for office work with visual display terminals (vtd) section 11: Usability guide
TS EN ISO 9241-12 Ergonomic features for office work with visual display terminals (vdt) - Part 12: Presentation of information
TS EN ISO 9241-13 Ergonomic dimensions for office work with display terminals (vdts) 13: User guide
TS EN ISO 9241-15 Ergonomic dimensions for office work with display terminals (vdts) 15: Command dialogs
TS EN ISO 9241-16 Ergonomic requirements for office work with image display terminals - Part 16: Direct processing / routing dialogs
TS EN ISO 9241-8 Ergonomic features of office work with visual display terminals (vdt) - Part 8: Features of image colors
TS EN ISO 9241-6 Ergonomic features for office work with visual display terminals (vdt) - Part 6: Guidelines for the business environment
TS EN ISO 9241-129: Ergonomics of 2010 Human-System interaction - Part 129: Guidance on software customization
TS EN ISO 9241-1 / A1 Ergonomic features for office work with visual display terminals (vdt) - Part 1: General introduction
TS EN ISO 9241-171 Human - Ergonomics of system interaction - Part 171: Software access guide
TS EN ISO 9241-300 Human-System interaction ergonomics - Part 300: Introduction to electronic visual imaging rules
TS EN ISO 9241-304 Human-System interaction ergonomics - Part 304: User performance test methods for electronic visual imaging
TS EN ISO 9241-305 Human-system interaction ergonomics - Part 305: Optical laboratory test methods for electronic visual imaging
TS EN ISO 9241-306 Human-System interaction ergonomics - Part 306: Field evaluation methods for electronic visual imaging
TS EN ISO 9241-307 Human-System interaction ergonomics - Part 307: Analysis and conformity test methods for electronic visual imaging
TS EN ISO 9241-400 Human-system interaction ergonomics - Part 400: Principles and specifications of physical input devices
TS EN ISO 9241-410 Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices
TS 9266 EN ISO 10301 Water quality-Determination of highly volatile halogenated hydrocarbons-Gas chromatographic methods
TS 9266 EN ISO 10301 Water quality-Determination of highly volatile halogenated hydrocarbons-Gas chromatographic methods
TS ISO 9271 Cleaning of radioactive contaminated surfaces - Testing of cleaning agents for textiles
TS EN ISO 9308-3 Water quality-Detection and enumeration of escherichia coli and coliform bacteria in surface and wastewater-Part 3: Inoculation in liquid media (most probable number)
TS 9315 ISO 1996-1 Acoustics - Description, measurement and evaluation of environmental noise - part 1: Basic quantities and evaluation procedures
TS 9315 ISO 1996-1 / T1 Acoustics - Description, measurement and evaluation of environmental noise - Part 1: Basic quantities and evaluation procedures
TS ISO 9359 Air quality - Stratified sampling method for assessing ambient air quality
TS EN ISO 9377-2 Water quality- Determination of hydrocarbon oil index- Part 2: Solvent extraction and gas chromatography method
TS ISO 9390 Water quality - Determination of borate - Spectrometric method with azomethine-H
TS ISO 9390 Water quality - Determination of borate - Spectrometric method with azomethine-H
TS ISO 9404-1 Enclosures for protection against ionizing radiation - Lead shielding units for 150 mm, 200 mm and 250 mm thick walls - Part 1: 150 mm, 200 mm zigzag units
TS EN ISO 9439 Water quality - Evaluation of final aerobic biodegradability of organic compounds in aqueous media - Determination of released carbon dioxide
TS 9483 ISO 10530 Water quality-Determination of dissolved sulfur-Photometric method using methylene blue
TS 9483 ISO 10530 Water quality-Determination of dissolved sulfur-Photometric method using methylene blue
TS ISO 9486 Workplace air - Determination of chlorinated hydrocarbon vapors - Activated charcoal tube / solvent separation / gas chromatography method
TS ISO 9487 Workplace air-Determination of aromatic hydrocarbons in vapor form-Activated coal tube / solvent desorption / gas chromatographic method
TS 9546 EN 12880 Characterization of sludges - Determination of dry residue and water content
TS 9547 ISO 5667-12 Water quality - Sampling - Part 12: Sampling guide for bottom sediments
TS EN ISO 9562 Water quality - Determination of adsorbable organically bound halogens (aox)
TS 9595-2 EN 60645-2 Audiometers- Part 2: Equipment for speech audiometry
tst ISO 9612 Principles for measuring and evaluating exposure to noise in an acoustic operating environment
TS EN ISO 9612 Principles for the measurement and evaluation of exposure to noise in an acoustic operating environment
TS EN ISO 9773 Plastics - Determination of combustion properties of vertical, thin, flexible test specimens in contact with a small flame ignition source
TS EN ISO 9773 / A1 Plastics - Determination of the combustion properties of thin, flexible test specimens in vertical position in contact with a small flame ignition source
TS ISO 1996-2 / T1 Acoustics - Description, measurement and evaluation of environmental noise - Part 2: Determination of environmental noise levels
TS ISO 9835 Air quality - Ambient air - Determination of black smoke index
TS EN ISO 9886 Ergonomics - Evaluation of thermal stress by physiological measurements
TS EN ISO 9886 Ergonomics - Evaluation of thermal stress by physiological measurements
TS EN ISO 9887 Water quality-Determination of aerobic biodegradability of organic compounds in aqueous medium semi-continuous activated sludge method
TS EN ISO 9888 Water quality - Evaluation of the final aerobic degradability of organic compounds in aqueous media - Stationary test (zahn - Wellens method)
TS EN 12416-2 + A1 Stationary fire extinguishing systems - Powder systems - part 2: Design, construction and maintenance
TS ISO 9964-2 Water quality-Determination of sodium and potassium part 2: Determination of potassium by atomic absorption spectrometer
TS ISO 9964-2 Water quality-Determination of sodium and potassium part 2: Determination of potassium by atomic absorption spectrometer
TS ISO 9964-1 Water quality - Determination of sodium and potassium part 1: Determination of sodium by atomic absorption spectroscopy
TS ISO 9964-1 Water quality - Determination of sodium and potassium part 1: Determination of sodium by atomic absorption spectroscopy
TS ISO 9964-3 Water quality- Determination of sodium and potassium part 3: Determination of sodium and potassium by flame emission spectrometry
TS ISO 9964-3 Water quality- Determination of sodium and potassium part 3: Determination of sodium and potassium by flame emission spectrometry
TS ISO 9978 Radiation protection - Sealed radioactive sources - Leak detection test methods
TS ISO 10054 Internal combustion compression-ignition (diesel) engines - Smoke meters from steady-state engines - Filter type smoke meter
TS EN ISO 10075-1 (Formerly: TS ISO 10075) Ergonomic rules for mental workload-General terms and definitions
TS EN ISO 10075-2 (Formerly: TS ISO 10075-2) Ergonomic rules on mental workload - Part 2: Design rules
TS ISO 10075: 1999 / T1 (Number modification, TS EN ISO 10075-1) Ergonomic rules for mental workload - General terms and definitions
TS ISO 10075-2: 1999 / T1 (Number modification, TS EN ISO 10075-2) Ergonomic rules for mental workload - Part 2: Design rules
TS ISO 10155 Constant source emissions - Determination of mass concentrations of particles - Automatic monitoring - Performance characteristics, test methods and properties
TS ISO 10229 Water quality - Determination of the effect of long-term toxicity on freshwater fish - Method for assessing the effect of rainbow trout (oncorhynchus mykiss, walbaum (teleostei, salmonidae)) on growth rate.
TS ISO 10229 Water quality - Determination of the effect of long-term toxicity on freshwater fish - Method for assessing the effect of rainbow trout (oncorhynchus mykiss, walbaum (teleostei, salmonidae)) on growth rate.
TS EN ISO 10304-3 Water quality-Determination of dissolved anions by liquid ion chromatography section 3: Determination of chromate, iodide, sulfide, thiocyanate and thiosulfate
TS EN ISO 10304-3 Water quality-Determination of dissolved anions by liquid ion chromatography section 3: Determination of chromate, iodide, sulfide, thiocyanate and thiosulfate
Water quality - Determination of dissolved anions by liquid ion chromatography Section 10304: Determination of chlorate, chloride and chlorite dissolved in less contaminated water Part 4-10304 (Former no: TS ISO 4-4)
TS EN ISO 10304-1 Water quality-Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions by liquid ion chromatography section 1-Method for less contaminated water
TS ISO 10304-4: 1999 / T1 (Number modification, TS EN ISO 10304-4) Water quality - Determination of dissolved anions by liquid ion chromatography section 4: Determination of dissolved, chlorate, chloride and chloride in slightly contaminated water
TS ISO 10312 Environmental air-Determination of asbestos fibers-Direct transfer transmission electron microscopy method
TS ISO 10348 Photography-Bath wastewater-Determination of silver content
TS ISO 10359-2 Water quality-Determination of fluoride-Part 2: Determination of inorganic bound fluoride after wet combustion and distillation
TS ISO 10359-2 Water quality-Determination of fluoride-Part 2: Determination of inorganic bound fluoride after wet combustion and distillation
TS 10370Fire organization - Respiratory equipment - Rules of use
TS ISO 10381-4 Soil quality - Sampling - Part 4: Operation guide for inspecting natural, natural and cultivated areas
TS ISO 10381-3 Soil quality - Sampling - Part 3: Safety guide
TS ISO 10381-5 Soil quality-Sampling-Chapter 5: Soil pollution in urban and industrial areas
TS ISO 10381-1 Soil quality - Sampling - Part 1: Guidance on the design of sampling programs
TS ISO 10381-2 Soil quality - Sampling - Part 1: Guide to sampling techniques
TS ISO 10397 Constant source emissions - Determination of asbestos plant emissions - Fiber counting method
TS EN ISO 10528 Textile - Commercial washing process of textile fabrics before flammability test
TS ISO 10566 Water quality - Determination of aluminum - Spectrometric method using pyrocatechol violet
TS ISO 10566 Water quality - Determination of aluminum - Spectrometric method using pyrocatechol violet
TS ISO 10573 Soil quality - Determination of water content in unsaturated soil layer - Neutron probe method
TS ISO 10573 Soil quality - Determination of water content in unsaturated soil layer - Neutron probe method
TS ISO 10573 Soil quality - Determination of water content in unsaturated soil layer - Neutron probe method
TS EN ISO 10634 Water quality-Guidance on the procedures and preparation for the assessment of the biodegradability of poorly soluble organic compounds in water
TS EN ISO 10634 Water quality-Guidance on the procedures and preparation for the assessment of the biodegradability of poorly soluble organic compounds in water
TS ISO 10648-1 Enclosures - Part 1: Design principles
TS ISO 10648-2 Enclosures - Part 2: Sealing classification and related control methods
TS 10691 ISO 6309 Fire protection - Safety signs
TS EN ISO 10695 Water quality - Determination of some organic nitrogen and phosphorus compounds - Gas chromatographic methods
TS EN ISO 10705-1 Water quality - Detection and enumeration of bacteriophages section 1: Enumeration of specific bacteriophages
TS EN ISO 10705-2 Water quality - Detection and counting of bacteriophages section 2: Counting somatic coliphages
TS ISO 10706 Water quality - Determination of long-term toxicity of substances to daphnia magna straus (cladocera, crustacea)
TS ISO 10707: 1996 / T1 (Number modification, TS EN ISO 10707) Water quality - Assessment of the aerobic biological degradability of organic compounds in aqueous media - Determination of biochemical oxygen demand
TS ISO 10707: 1996 / T1 (Number modification, TS EN ISO 10707) Water quality - Assessment of the aerobic biological degradability of organic compounds in aqueous media - Determination of biochemical oxygen demand
TS ISO 10708 Water quality - Evaluation of the final aerobic biodegradability of organic compounds in aqueous media - Determination of biochemical oxygen demand in a two-phase sealed bottle test
TS EN ISO 10712 Water quality-Pseudomonas putida inhibition test
TS EN ISO 10712 Water quality-Pseudomonas putida inhibition test
TS ISO 10780 Spot welding emissions - Measurement of velocity and flow of gas flows in pipes
TS ISO 10849 Constant source emissions - Determination of mass concentrations of nitrogen oxides - Performance characteristics of automatic measuring systems
TS EN ISO 10862 Small craft - Quick release system for trapezoidal hardware
TS ISO 11042-1 Gas turbines - Exhaust gas emissions - Part 1: Measurement and evaluation
TS ISO 11042-2 Gas turbines - Exhaust gas emissions - Part 2: Automatic monitoring of emissions
TS EN ISO 11064-3 Ergonomic design of control centers - Part 3: Control room layout
TS EN ISO 11064-6 Ergonomic design of control centers - Part 6: Environmental requirements for control centers
TS EN ISO 11064-5 Ergonomic design of control centers - Part 5: Instruments and controls
TS EN ISO 11064-3 / AC Ergonomic design of control centers - Part 3: Control room layout
TS EN ISO 11079 Ergonomics of the thermal environment - Determination and interpretation of cold stress using clad insulation and local cooling effects
TS ISO 11083 Water quality - Determination of chromium (vi) - 1,5 - Spectrometric method with diphenyl carbazide
TS ISO 11083 Water quality - Determination of chromium (vi) - 1,5 - Spectrometric method with diphenyl carbazide
TS EN ISO 11161 Safety in machines - Integrated manufacturing systems - Basic rules
TS 11162-1 EN ISO 4589-1 Plastics - Determination of combustion behavior with oxygen index - Part 1: Guide
TS 11162-2 EN ISO 4589-2 Plastics - Determination of combustion properties by oxygen index - Part 2: Determination of ambient temperature
TS 11162-3 EN ISO 4589-3 Plastics - Determination of combustion properties by oxygen index - Part 3: High temperature test
TS ISO 14005 Environmental management systems - Guidelines for the progressive implementation of environmental management systems - Including the use of environmental performance assessment
TS 11250 Wastes-Definitions of terms-Related to fuels obtained from waste
TS ISO 11259 Soil quality - simple soil description
Soil quality - Determination of effective cation exchange capacity and base saturation level with barium chloride solution TS EN ISO 11260
Soil quality - Determination of effective cation exchange capacity and base saturation level with barium chloride solution TS EN ISO 11260
TS ISO 11260: 1997 / T1 (Number modification, TS EN ISO 11260) Soil quality - Determination of effective cation exchange capacity and base saturation level with barium chloride solution
TS ISO 11260: 1997 / T1 (Number modification, TS EN ISO 11260) Soil quality - Determination of effective cation exchange capacity and base saturation level with barium chloride solution
TS ISO 11271 Soil quality - Determination of redox potential - Field method
TS EN ISO 11348-1 Water quality-Determination of inhibition effects of water samples on light emissions of vibrio ficheri (luminescent bacteria test) part 1: By freshly sown bacteria method
TS EN ISO 11369 Water quality - Determination of some pesticides (solids) - High performance liquid chromatography method with uv detector for liquid extraction
TS EN ISO 11399 Ergonomics of the thermal environment - Principles and applications of relevant standards
TS EN ISO 11399 Ergonomics of the thermal environment - Principles and applications of relevant standards
TS ISO 11423-1 Water quality - Determination of benzene and some derivatives - Part 1: Gas chromatographic method using upper gas phase
TS ISO 11423-1 Water quality - Determination of benzene and some derivatives - Part 1: Gas chromatographic method using upper gas phase
TS ISO 11423-2 Water quality - Determination of benzene and some derivatives - Part 2: Gas chromatographic method using extraction
TS ISO 11423-2 Water quality - Determination of benzene and some derivatives - Part 2: Gas chromatographic method using extraction
TS ISO 11465 Soil quality-Determination of dry matter and water based on mass basis-Gravimetric method
TS ISO 11465 Soil quality-Determination of dry matter and water based on mass basis-Gravimetric method
TS ISO 11465 Soil quality-Determination of dry matter and water based on mass basis-Gravimetric method
TS EN ISO 11553-1 Safety in machines - Laser machines - Part 1: General safety rules
TS EN ISO 11553-2 Safety in machines - Laser processing machines - Part 2: Safety requirements for hand-held laser processing machines
TS ISO 11564 Constant source emissions - Determination of mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
TS ISO 11614 Compression-ignition internal combustion piston engines - Devices for measuring the opacity of exhaust gases and determining light absorption coefficients
TS ISO 11632 Constant source emissions - Determination of sulfur dioxide mass concentration - Ion chromatographic method
TS EN ISO 11690-1 Acoustics - Recommended practice for the design of low-noise workplaces with machinery - Part 1: Noise control strategies
TS EN ISO 11690-2 Acoustics - Recommended application for the design of workplaces with low noise levels in the machine part 2: Noise control measures
TS EN ISO 11690-3 Acoustics - Recommended practice for the design of workplaces with low noise levels in the machine - Part 3: Sound emission and noise estimation in work rooms
TSE ISO / TR 11696-1 Reaction to fire test results - Part 1: Application of test results to estimate fire performance of interior linings and other building products
TSE ISO / TR 11696-2 Reaction to fire test results - Part 2: Fire hazard assessment of building products
TS ISO 11731 Water quality - detection and counting of Legioella
TS EN ISO 11733 Water quality - Removal of organic compounds in aqueous media and determination of biodegradability - Activated sludge simulation test
TS EN ISO 11771: 2010 Air quality-Timed mass emission and emission factor determination-Overview
TS 11900 EN 1399 Elastic floor coverings - Determination of resistance to extinguished and burning cigarettes
TS EN ISO 11905-1 Water quality - Determination of nitrogen - Part 1: Oxidation-breaking method with peroxodisulphate
TSE ISO EN 11925-1 Building materials - Fire resistance tests - Flammability upon direct exposure to flame - Part 1: Ignition guide
TS ISO 11925-3 Building materials - Fire resistance tests - Flammability upon direct exposure to flame - Part 3: Test with multiple flame welding
TS EN ISO 11925-2: 2010 / AC: 2011 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS 11981 ISO / DIS 14669 Water quality-Crustacea bioassays-Determination of lethal acute toxicity in marine copepods (copepoda, crustacea)
TS 11981 ISO / DIS 14669 Water quality-Crustacea bioassays-Determination of lethal acute toxicity in marine copepods (copepoda, crustacea)
TS ISO 12039 Constant source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automatic measuring systems
TS EN 12065 Liquefied natural gas (lng) plant and equipment-Compatibility test of foam concentrates designed for the production of fire extinguishing powders and medium and high expansion foam used in liquefied natural gas fires
TS EN 12094-2 Fixed fire extinguishing systems - Components for gas fire extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and retard devices
TS EN 12094-9 Stationary fire extinguishing systems - Components for gas fire extinguishing systems section 9: Requirements and test methods for special fire detectors
TS EN 12094-10 Stationary fire extinguishing systems - Components for gas fire extinguishing systems section 10: Specification and test methods for pressure gauges and pressure switches
TS EN 12094-11 Stationary extinguishing systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
TS EN 12094-12 Stationary fire extinguishing systems - Components for gas fire extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
TS EN 12094-12 Stationary fire extinguishing systems - Components for gas fire extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
TS EN 12094-13 Fixed fire extinguishing systems - Components of gas extinguishing systems - Part 13: Specification and test methods for one-way valves and non-return valves
TS EN 12094-16 Fixed fire extinguishing systems - Components for gas extinguishing systems - Part 16: Specification and test methods for scenting devices of low pressure co2 systems
TS EN 12094-7 / A1 Stationary fire extinguishing systems - Components of gas extinguishing systems - Part 7: Specification and test methods for sprayers in Co2 systems
TS EN 12094-7 / A1 Stationary fire extinguishing systems - Components of gas extinguishing systems - Part 7: Specification and test methods for sprayers in Co2 systems
TS EN 12096 Mechanical vibration - Notification and verification of vibration emission values
TS EN ISO 12100: Safety in 2010 machines - General principles for design - Risk assessment and risk reduction
TS EN 12101-6 Smoke and heat control systems - part 6: Technical specifications for pressure differential systems - Kits
TS EN 12101-8: 2011 Smoke and heat control systems - Part 8: Smoke control covers
TS EN 12101-6 / AC Smoke and heat control systems - Part 6: Technical specifications for pressure differential systems - Kits
TS EN 12101-7: 2011 Smoke and heat control systems - Part 7: Smoke channel sections
TS EN 12101-1 / A1 Smoke and heat control systems - part 1: Technical specifications for smoke barriers
TS 12115 Fire prevention - in libraries and archives
TS 12116 Fire prevention - Building materials - Fire resistance classes and properties
TS EN ISO 12127-2 Heat and flame resistant clothing - Determination of contact heat transfer in protective clothing and related material - Part 2 - Method of using contact heat generated by reducing small cylinders
TS EN ISO 12138 Textile - Laundry processes in household and similar places before the flammability test of textile fabrics
TS EN 12198-3 + A1 Safety in machinery - Assessment and reduction of risks caused by radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
TS EN 12198-3 + A1 Safety in machinery - Assessment and reduction of risks caused by radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
TS EN 12198-2 + A1 Safety in machinery - Assessment and mitigation of risks from radiation emitted by machinery - Part 2: Measurements of radiation propagation
TS EN 12255-1 Wastewater treatment plants - Part 1: General building rules
TS EN 12255-16 Wastewater treatment plants - Part 16: Physical (mechanical) filtration
TS EN 12255-5 Wastewater treatment plants - Part 5: Lagon process
TS EN 12255-6 Wastewater treatment plants - Part 6: Activated sludge treatment
TS EN 12255-9 Wastewater treatment plants - Part 9: Odor control and ventilation
TS EN 12255-10 Wastewater treatment plants - Part 10: Safety requirements
TS EN 12255-11 Wastewater treatment plants - Part 11: General data required
TS EN 12255-12 Wastewater treatment plants - Part 12: Control and automation
TS EN 12255-13 Wastewater treatment plants - Part 13: Chemical treatment - Waste water treatment by sedimentation / agglomeration
TS EN 12255-14 Wastewater treatment plants - Part 14: Disinfection
TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry
TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap
TS EN 12259-4 Stationary fire extinguishing systems - Elements for sprinklers and water spray systems - Part 4: Water motor alarms
TS EN 12259-4 Stationary fire extinguishing systems - Elements for sprinklers and water spray systems - Part 4: Water motor alarms
TS EN 12259-2 / AC Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 2: Wet-type alarm valve fittings
TS EN 12259-2 / A2 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 2: Wet type alarm valve fittings
TS EN 12259-2 / A2 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 2: Wet type alarm valve fittings
TS EN 12259-3 / A2 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 3: Dry type alarm valve assemblies
TS EN 12259-3 / A2 Fixed extinguishing systems - Elements for sprinklers and water spray systems - Part 3: Dry type alarm valve assemblies
TS EN 12260 Water quality - Determination of nitrogen - Determination of bound nitrogen (tnb) by oxidation to nitrogen oxides
TS EN 12285-1 Steel tanks - Factory made - part 1: for underground storage of flammable and non-flammable water contaminants - Single and double walled - Horizontal cylindrical
TS EN ISO 12402-4 Personal flotation equipment - Part 4: Life jackets, performance level 100 - Safety regulations
TS EN ISO 12402-6 Personal flotation equipment (kyd) - Part 6: Special-purpose life jackets and emergency aids - Safety rules and additional test methods
TS EN ISO 12402-9 Personal flotation equipment - Part 9: Test methods
TS EN ISO 12402-3 Personal flotation equipment - Part 3: Life jackets, performance level 150 - Safety regulations
TS EN ISO 12402-5 Personal flotation equipment - Part 5: Seperation aids, (performance level 50) - Safety regulations
TS EN ISO 12402-7 Personal flotation equipment - Part 7: Materials and components - Safety requirements and test methods
ISO EN ISO 12402-5 / AC Personal flotation equipment - Part 5: Sanitary aids (performance level 50) - Safety regulations
TS EN ISO 12402-8 Personal flotation equipment - Part 8: Accessories - Safety requirements and test methods
TS EN ISO 12402-10 Personal flotation equipment - Part 10: Selection and use of personal flotation equipment and other related equipment
TS EN ISO 12402-2 / A1 Personal flotation equipment - Part 2: Life jackets, performance level 275-Safety regulations
TS EN ISO 12402-3 / A1 Personal flotation equipment - Part 3: Life jackets, performance level 150 - Safety regulations
TS EN ISO 12402-4 / A1 Personal flotation equipment - Part 4: Life jackets, performance level 100 - Safety regulations
12402-6 / A1 Personal flotation equipment (kyd) - Part 6: Special-purpose life jackets and emergency aids - Safety rules and additional test methods
TS EN 12416-1 + A2 Stationary fire extinguishing systems - Powder systems - part 1: Component properties and test methods
TS EN 12457-2 Characterization of wastes - Solid extraction analysis - Compliance test for solid extraction of granular solid wastes and sludges - Part 2: Single-stage batch test for materials with a liquid solids ratio of 10 l / kg and particle size less than 4 mm
TS EN 12457-2 Characterization of wastes - Solid extraction analysis - Compliance test for solid extraction of granular solid wastes and sludges - Part 2: Single-stage batch test for materials with a liquid solids ratio of 10 l / kg and particle size less than 4 mm
TS EN 12457-3 Characterization of wastes - Solid extraction analysis - Suitability test for solid extraction of granular solid wastes and sludges - Part 3: Single for high solids content with a particle size of 10 l / kg and particle size less than 4 mm progressive batch experiment28.01.2004
TS EN 12457-3 Characterization of wastes - Solid extraction analysis - Suitability test for solid extraction of granular solid wastes and sludges - Part 3: Single for high solids content with a particle size of 10 l / kg and particle size less than 4 mm progressive batch experiment28.01.2004
TS EN 12461 Biotechnology - Large scale process and production - Guidance for processing, inactivation and testing of waste
TS EN ISO 12402-6 Personal flotation equipment (kyd) - Part 6: Special-purpose life jackets and emergency aids - Safety rules and additional test methods
TS EN ISO 12402-9 Personal flotation equipment - Part 9: Test methods
TS EN ISO 12402-3 Personal flotation equipment - Part 3: Life jackets, performance level 150 - Safety regulations
TS EN ISO 12402-5 Personal flotation equipment - Part 5: Seperation aids, (performance level 50) - Safety regulations
TS EN ISO 12402-7 Personal flotation equipment - Part 7: Materials and components - Safety requirements and test methods
ISO EN ISO 12402-5 / AC Personal flotation equipment - Part 5: Sanitary aids (performance level 50) - Safety regulations
TS EN ISO 12402-8 Personal flotation equipment - Part 8: Accessories - Safety requirements and test methods
S EN ISO 12402-10 Personal flotation equipment - Part 10: Selection and use of personal flotation equipment and other related equipment
TS EN ISO 12402-2 / A1 Personal flotation equipment - Part 2: Life jackets, performance level 275-Safety regulations
TS EN ISO 12402-3 / A1 Personal flotation equipment - Part 3: Life jackets, performance level 150 - Safety regulations
TS EN ISO 12402-4 / A1 Personal flotation equipment - Part 4: Life jackets, performance level 100 - Safety regulations
12402-6 / A1 Personal flotation equipment (kyd) - Part 6: Special-purpose life jackets and emergency aids - Safety rules and additional test methods
TS EN 12416-1 + A2 Stationary fire extinguishing systems - Powder systems - part 1: Component properties and test methods
TS EN 12457-2 Characterization of wastes - Solid extraction analysis - Compliance test for solid extraction of granular solid wastes and sludges - Part 2: Single-stage batch test for materials with a liquid solids ratio of 10 l / kg and particle size less than 4 mm
TS EN 12457-2 Characterization of wastes - Solid extraction analysis - Compliance test for solid extraction of granular solid wastes and sludges - Part 2: Single-stage batch test for materials with a liquid solids ratio of 10 l / kg and particle size less than 4 mm
TS EN 12457-3 Characterization of wastes - Solid extraction analysis - Suitability test for solid extraction of granular solid wastes and sludges - Part 3: Single for high solids content with a particle size of 10 l / kg and particle size less than 4 mm graded party experiment
TS EN 12457-3 Characterization of wastes - Solid extraction analysis - Suitability test for solid extraction of granular solid wastes and sludges - Part 3: Single for high solids content with a particle size of 10 l / kg and particle size less than 4 mm graded party experiment
TS EN 12461 Biotechnology - Large scale process and production - Guidance for processing, inactivation and testing of waste
TS EN 12561-1: 2011 Railway applications-Tank wagons-Part 1: Marking of tank wagons for the transport of dangerous goods
TS EN 12561-6: 2011 Railway applications-Tank wagons- Section6. tank access holes (man holes)
TS EN 12561-2: 2011 Railway applications-Tank wagons- Part2: Liquid discharge devices from below including steam return system
TS EN 12561-5: 2011 Railway applications-Tank wagons- Part 5: Top-mounted devices for pouring and filling liquid products from the bottom
TS EN 12566-1 Small wastewater treatment systems - For populations up to the equivalent population 50 - Part 1: Pre-built septic tanks
TS EN 12568 Foot and leg protectors - Shoe toe and penetration resistant metal reinforcements - Features and test methods
TS EN 12574-1 Stationary waste containers - Part 1: Up to 10,000 liter containers with trunnion, double trunnion or pocket lifting device with flat or cambered lid - Dimensions and design
TS EN 12574-2 Stationary waste containers - Part 2: Performance characteristics and test methods
TS EN 12673 Water quality - Gas chromatographic determination of some chlorophenols in water
TS EN 12753 + A1 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety regulations
TS ISO 12794 nuclear energy - Radiation protection - Individual thermoluminescent dose meters for hands, feet and eyes
TS ISO 12807 Safe handling of radioactive materials - leakage tests on packagings
tst EN 12816 Tubes for LPG - Refillable - Steel and aluminum - Disposal of tubes
TS EN 12841 Fall protection - Rope access systems - Rope adjustment device
TS EN 12873-2 Effect of substances on waters intended for human consumption - Effects due to transition - Part 2: Test method for substances applied in non-metal and cement-free areas.
TS EN 12879 Properties of sludges-Determination of glow loss of dry mass
TS EN 12881-2 + A1 Conveyor belts - Flammability test with fire simulation section 1: Propane combustion test
TS ISO 12884 Ambient air-Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons-Aggregation and gas chromatographic / mass spectrometric analysis on Sorbent-reinforced filters
TS ISO 12890 Water quality - Determination of toxicity in freshwater fish larvae and embryos - Semi-static method
TS ISO 12890 Water quality - Determination of toxicity in freshwater fish larvae and embryos - Semi-static method
TS EN 12918 Water quality- Dichlormentan extraction and gas chromatographic analysis and determination of parathion, parathion, methyl and some other organophosphorus compounds in water
TS EN 12941 Respiratory protection devices - Reinforced filter devices used with helmet or helmet - Specification, test and marking
TS EN 12941 / A1 Respiratory protection devices - Reinforced filter devices used with helmet or helmet - Specification, test and marking
TS EN 12941 / A2 Respiratory protection devices - Power assisted filter devices for helmets or helmets - Specification, test and marking
TS EN 12942 / A1 Respiratory protection devices - Power assisted filter devices with full face masks, half masks or quarter masks - Specification, test and marking
TS EN 12942 / A2 Respiratory protection devices - Power assisted filter devices with full face masks, half masks or quarter masks - Specification, test and marking
TS EN ISO 12952-2: 2010 Combustion behavior of textile bed materials - Part 2: Ignition source: Unfading matches and equivalent
TS ISO 12992 Plastics-Determination of vertical flame spread in films and sheets
TS EN 13034 + A1 Protective clothing against liquid chemicals - Performance rules for protective clothing with limited protection against liquid chemicals (type 6 and type pb [6] equipment)
TS EN 13061 Protective clothing - Boots for footballers - Rules and test methods
TS EN 13071-1 / AC Stationary waste bins with capacity up to 5000 1 with top lift and bottom discharge - Part 1: General requirements
TS EN 13076 Devices used to prevent the pollution that may occur with the escape of potable water - Unrestricted air gap - Family a, type a
TS EN 13077 Prevention of contamination from drinking water backflow - Non-circular flood sluice (unrestricted) air gap - Group a, type b
TS EN 13078 Preventing contamination from drinking water backflow - Immersion supply air gap with flood sluice and air intake - Group a, type c
tst EN 13079 Preventing contamination from back-escape of potable water-Air gap with injector-Class a- Type d
TS EN 13087-7 Protective helmets - Test methods - Part 7: Flame resistance
TS EN 13087-8 / A1 Protective helmets - Test methods - Part 8: Electrical properties
TS EN ISO 13090-1 Mechanical vibration and shock - Guidance on the safety aspects of human experience and experimentation - Part 1: Exposure of the whole body to mechanical vibration and repeated shock
TS EN 13123-2 Windows, doors and shutters - Explosion resistance - Necessary specifications and classification - Part 2: Classification test
TS EN 13124-2 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Classification test
TS EN 13178 Personal eye protection - Eye protection for snowmobile users
TS EN 13193 Packaging - Packaging and environment - Terms and definitions
TS EN 13211 / AC Air quality - Constant source emissions - Determination of total mercury concentration by manual method
TS EN 13238 Reaction of building products to fire tests - General rules and conditioning procedures for the selection of layers
TS EN 13274-1 Respiratory protective devices - Test methods - Part 1: Inward leakage and inward determination of total leakage
TS EN 13274-5 Respiratory protective devices - Test methods - Part 5: Climate conditions
TS EN 13274-3 Respiratory protective devices - Test methods - part 3: Determination of respiratory resistance
TS EN 13274-6 Respiratory protective devices - Test methods - Part 6: Determination of carbon dioxide content in inhaled air
TS EN 13274-7 Respiratory protective devices - Test methods - Part 7: Determination of particle penetration through the filter
TS EN 13277-4 Protective equipment for martial arts - Part 4: Additional features and test methods for head protectors
TS EN 13277-5 Protective equipment for martial arts - Part 5: Additional rules and test methods for genital and abdominal protectors
TS EN 13277-6 Protective equipment for combat sports - Part 6: Additional rules and test methods for breast protection in women
TS EN 13277-7 Protective equipment for martial arts - Part 7: Additional rules and test methods for hand and foot protectors
TS EN 13277-7 Protective equipment for martial arts - Part 7: Additional rules and test methods for hand and foot protectors
TS EN 13277-4 / A1 Protective equipment for martial arts - Part 4: Additional features and test methods for head protectors
TS EN 13284-2 Constant source emissions - Determination of the low-range mass concentration of dust - Part 2: Automated measuring systems "
TS EN 13315 Tanks for transporting dangerous goods-Service equipment for tanks-Unloading connection with own weight
TS EN 13317 + A1 Tanks - To transport dangerous goods - Service equipment for tanks - Man-hole opening group
TS ISO 13344 Estimation of the lethal toxicity effect of fire products
TS EN 13356 Visibility requirements for amateur use properties and test methods
TS ISO 13358 Water quality - Determination of easily released sulfur
TSE ISO / TR 13387-1 Fire safety engineering - Part 1: Application of fire performance concepts for design purposes
TSE ISO / TR 13387-2Fire safety engineering - Part 2: Design fire scenarios and fires
TS EN ISO 13395 Water quality-Nitrite nitrogen, nitrate nitrogen and their total flow analysis (cfa and fias) and spectrometric determination
TS EN ISO 13395 Water quality-Nitrite nitrogen, nitrate nitrogen and their total flow analysis (cfa and fias) and spectrometric determination
tst EN ISO 13406-2 Ergonomic requirements for working with flat-panel visual displays - Part 2: Ergonomic requirements for flat-panel displays
TS EN 13427 Packaging - Rules for the use of standards in the field of packaging and packaging waste
TS EN 13432 Packaging-Biodegradable and compostable recyclable packaging characteristics-Test steps and evaluation criteria for acceptance of packaging
TS EN 13432 / AC Packaging-Biodegradable and compostable recyclable packaging characteristics-Test steps and evaluation criteria for the acceptance of the packaging
tst EN 13490 Safety of industrial vehicles - Mechanical vibration - Measurement and laboratory evaluation on the operator seat
TS EN 13490 + A1 Mechanical vibration - Industrial trucks - Operator seat vibration characteristics and laboratory evaluation
TS EN 13501-1 / tst A1Building products and structural elements, fire classification section 1: Classification using data from behavior tests against fire
TS EN 13501-4 / tst A1 Fire classification of building products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems
TS EN 13528-2 Ambient air quality-Diffusive sampling devices for the determination of gas and vapor concentrations-Features and test methods-Part 1: Specific properties and test methods
TS EN 13528-3 Ambient air quality-Diffusive sampling devices for the determination of gas and vapor concentrations -Features and test methods-Section 3: Selection, operation and maintenance manual
TS EN 13546 + A1 Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goalkeepers and tibia protectors for field players - Rules and test methods
TS EN 13565-1 + A1 Stationary fire extinguishing systems - Foam systems - part 1: Requirements and test methods for components
TS EN 13565-2 Stationary fire extinguishing systems - Foam systems - Part 2: Design, construction and maintenance
TS EN 13565-2: 2009 / AC: 2010 Stationary fire extinguishing systems - Foam systems - Part 2: Design, construction and maintenance
TS ISO 13571 Endangered parts of fire - Guidance for estimating escape time using fire data
TS EN 13577 Concrete - Chemical effects - Determination of harmful carbon dioxide in water
TS EN 13595-1 Protective clothing for professional motorcycle riders - Jackets, pants and single or split suits - Part 1: General rules
TS EN 13595-2 Protective clothing for professional motorcycle riders - Jackets, pants and single or split suits - Part 2: Test method for the determination of impact resistance to impact
TS EN 13595-3 Protective clothing for professional motorcycle riders - Jackets, trousers and single or split suits - Part 3: Test method for the determination of explosion strength
TS EN 13595-4 Protective clothing for professional motorcycle riders - Jackets, pants and single or split suits - Part 4: Test method for the determination of shear strength under impact
TS EN 13613 Wheeled sport equipment - Skateboards - Safety rules and test methods
TS EN 13656 Characterization of waste - Disintegration of elements by microwave support using a mixture of hydrofluoric (hf) acid, nitric acid (hno3) and hydrochloric acid (hcl) for determination
TS EN 13657 Characterization of wastes - Degradation of the soluble part of the elements in king water for subsequent determination
TS EN 13725 Air quality - Determination of odor concentration by dynamic ophthalmometer
TS EN 13725 / AC Air quality - Determination of odor concentration by dynamic ophthalmometer
TS EN ISO 13732-3 Ergonomics of the thermal environment - Methods for evaluating human responses to contact with surfaces - Part 3: Cold surfaces
TS ISO 13752 Air quality - Determination of the uncertainties of a measurement method in field conditions by using a second method as a reference
TS EN ISO 13753 Mechanical vibration and shock - Hand and arm vibration - Method for measuring the ability of flexible materials to transmit vibration transmitted to the body by the hand and arm system
TS EN 13773 Textile and textile products - Combustion properties - Curtains - Classification scheme
TS EN 13794 Respiratory protection devices - Self-contained breathing apparatus - For escape - Rules, tests, marking
TS EN 13819-2 Acoustics - Hearing protectors - Tests - Part 2: Acoustic test methods
TS EN 13819-1 Hearing protectors - Tests - Part 1: Physical test methods
TS ISO 13829 Water quality - Determination of genotoxicity of water and wastewater using Umu-Experiment
TS EN 13832-2 Chemical resistant footwear - Part 2: Characteristics of chemical resistant footwear in laboratory conditions
TS EN 13832-1 Chemical protective footwear - Terms and test methods
TS EN ISO 13855 Safety in machines - Installation of protective equipment according to the approach speed of the body parts
TS ISO 13878 Soil quality - Determination of total nitrogen content by dry combustion method
TS EN 13890 Workplace air - Measurement processes of metals and metalloids in air - Properties and test methods
TS EN ISO 13982-2 Protective clothing against solid particles - Part 2: test method for the determination of inward leakage of small particle aerosols in clothing sets "
TS EN 13920-2 Aluminum and aluminum alloys - Scrap - part 2: Non-alloy aluminum scrap
TS EN 13920-3 Aluminum and aluminum alloys - Scrap - part 3: Wire and cable scrap
TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap
TS EN 13920-5 Aluminum and aluminum alloys - Scrap - section 5: Two or more types of alloy scrap from the same series
TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap
TS EN 13920-7 Aluminum and aluminum alloys - Scrap - part 7: Cast iron scrap
TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap
TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap
TS EN 13920-1 Aluminum and aluminum alloys - Scrap - part 1: General specifications, sampling and tests
TS EN 13920-11 Aluminum and aluminum alloys - Scrap - part 11: Aluminum-copper radiator scrap
TS EN 13920-12 Aluminum and aluminum alloys - Scrap - part 12: Single alloy scrap shavings
TS EN 13920-13 Aluminum and aluminum alloys - Scrap - part 13: Two or more alloy scrap shavings
TS EN 13920-14 Aluminum and aluminum alloys - Scrap - part 14: Aluminum packaging scrap
TS EN 13920-15 Aluminum and aluminum alloys - Scrap - part 15: Aluminum packaging scrap cleaned from the coating
TS EN 13920-16 Aluminum and aluminum alloys - Scrap - part 16: Scrap grade slag, dros and debris
TS EN 13920-10 Aluminum and aluminum alloys - Scrap - part 10: Waste beverage aluminum cans
TS EN 13922: 2011 Tanks for the transport of dangerous goods-Service equipment for tanks-Overfill prevention systems for liquid fuels
TS EN ISO 13982-1 Protective clothing against solid particles - Part 1: performance requirements for chemical protective clothing that protects the entire body against airborne solid particulate chemicals "
TS EN 14011 Water quality-Electrically fish sampling
TS EN 14021 Stone shields for off-road motorbike racing to protect drivers against stone and gravel "
TS ISO 14025 / T1 (Number modification, TS EN ISO 14025) Environmental labels and declarations - Type III environmental declarations - Principles and procedures
TS EN ISO 14025 (Formerly: TS ISO 14025) Environmental labels and declarations - Type III environmental statements - Principles and procedures
TS EN 14031 Workplace air - Determination of endotoxins in the air
Determination of burst characteristics of dust clouds - Part 14034: Determination of maximum burst pressure rise rate TS EN 2-2006: 1 + A2011
Determination of explosion characteristics of dust clouds - Part 14034: Determination of low explosion limit (lel) of dust clouds - TS EN 3-2006: 1 + A2011
Determination of burst characteristics of dust clouds - Part 14034: Determination of limiting oxygen concentration (loc) of dust clouds - TS EN 4 - 2004: 1 + A2011
TS EN 14044 / tst AC High overhead devices for fire service use - Staircase with movable rotary table - Safety and performance requirements and test methods
TS EN 14045 Packaging - Evaluation of the degradation of packaging materials by tests for applications under defined composting conditions
TS EN 14046 Packaging - Evaluation of final aerobic biodegradability and degradation of packaging materials under controlled composting conditions - Method of analysis of released carbon dioxide
TS EN 14058 Protective clothing - Clothing parts for protection against cold environments "
TS EN 14803 Description and / or description of the amount of waste
TS EN 14095 Water conditioning equipment inside buildings - Aluminum anode electrolytic treatment systems - Performance, safety and test conditions
TS EN 14115 Textile-door burning, large tents and related products used for the combustion behavior of materials
TS EN 14126 Protective clothing - Against pathogenic organisms - Performance characteristics and test methods
TS EN 14126 / AC Protective clothing - Against pathogenic organisms - Performance characteristics and test methods
TS EN 14135 Coatings - Determination of fire protection adequacy
TS EN 14187-7 Joint fillers - Cold applied - Test method for determination of flame resistance
TS EN 14207 Water quality-Determination of epichlorohydrin
TS ISO 14235 Soil quality - Determination of organic carbon by oxidation with sulfochromic acid
TS ISO 14239 Soil quality - Laboratory incubation systems for measuring the degradation of organic chemicals in aerobic conditions
TS ISO 14239 Soil quality - Laboratory incubation systems for measuring the degradation of organic chemicals in aerobic conditions
TS EN ISO 14240-2 (Formerly: TS ISO 14240-2) Soil quality- Determination of soil microbial biomass- Smoke extraction method
TS ISO 14240-1: 2001 / T1 (Number modified, TS EN ISO 14240-1) Soil quality- Determination of soil microbial biomass - Part 1: Rapidly accelerated respiration method with substrate
TS EN 14253 + A1 Mechanical vibration - Measurement and calculation of whole-body vibration exposure in the workplace according to healthy status
TS ISO 14254: 2003 / T1 (Number modification, TS EN ISO 14254) Soil quality-Determination of exchangeable acidity in barium chloride extracts
TS ISO 14255 Soil quality - Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air dried soils using calcium chloride solution as extractant
TS EN 14325 Protective clothing - against chemical substances - Test methods and performance classification of protective clothing material, seams, joints and joints
TS EN 14328 Protective clothing - Gloves and sleeves that protect against cuts of force-operated blades - Rules and test methods "
TS EN 14339 Underground fire hydrants
TS EN 14345 Waste characterization - Determination of hydrocarbon content by gravimetry
TS EN 14360 Protective clothing against rain - Test method for ready-made garment parts - High-impact drops from high impacts "
TS EN 14373 Explosion suppression systems
TS EN 14383-1 Crime prevention - City planning and building design - Part 1: Definitions of specific terms
TS EN 14384 Fire hydrants above ground
TS EN 14385 Constant source emissions - Determination of total emissions of as, cd, cr, co, cu, mn, ni, pb, ti and v
TS EN 14395-1 Effect of substances on water intended for human consumption-Organoleptic assessment of water in tanks-Part 1: Test method
TS EN 14395-1 Effect of substances on water intended for human consumption-Organoleptic assessment of water in tanks-Part 1: Test method
TS EN ISO 14402 Water quality - Determination of phenol index - Through flow analysis (aea and saa)
TS EN 14412 Water quality - Standard guide for the introduction, counting and interpretation of benthonic diatomic samples from rivers
TS EN 14450 Safety storage units - Theft classification rules and test methods - Safety cabinets "
TS EN 14452 Devices used to prevent contamination by backflow in potable water - Even valves dn8-Dn80-Family d, type a
TS EN 14454 Pollution prevention devices from the backflow of potable water-Dn 15 to dn 32 anti-flow hose connection-Group h, type a
TS EN 14458 Personal eye protection - Face shields and eye shields for firefighters, high performance industrial safety helmets for firefighters, ambulances and emergency services "
TS EN ISO 14460 Protective clothing for automobile competitors - Protection against heat and fire - Performance requirements and test methods
TS EN ISO 14460 Protective clothing for automobile competitors - Protection against heat and fire - Performance requirements and test methods
TS EN ISO 14460 / A1Protective clothing for automobile racers - Heat and flame protection - Performance rules and test methods amended 1
TS EN 14460 Explosion-proof equipment
TS EN 14466 + A1 Fire fighting pumps - Portable pumps - Safety and performance requirements, tests
TS EN 14470-2 Fire safety - Enclosures - Part 2: Safety cabinets for compressed gas cylinders
TS EN ISO 14505-2 Ergonomics of thermal media - Evaluation of thermal media in vehicles - Part 2: Determination of equivalent temperature
TS EN ISO 14505-2 / AC Ergonomics of thermal media - Assessment of thermal media in vehicles - Part 2: Determination of equivalent temperature
TS EN ISO 14505-3 Ergonomics of the thermal environment - Assessment of the thermal environment in vehicles - Part 3: Assessment of thermal comfort using subjects
TS EN 14506 Devices used to prevent contamination by backflow in potable water-Automatic routers-Family h, type c
TS ISO 14507 Soil quality-Preparation of samples for determination of organic pollutants
TS EN 14512 Tanks - For the transport of dangerous goods - Tank equipment for the transport of liquid chemicals hinged man hatches and collar with pin bolts
TS ISO 14520-3 Gas extinguishing systems - Physical properties and system design - Part 3: Fc-2-1-8 fire extinguishing agent
TS ISO 14520-7 Gas extinguishing systems - Physical properties and system design - Part 7: Hcfc 124 extinguishing media
TS EN 14522 Determination of ignition temperature from the gases and vapors themselves
TS EN 14529 Respiratory protection devices - Self-contained open-circuit compressed air breathing apparatus with half-mask designed to contain a solenoid-controlled demand valve for escape purposes only - Rules, tests, marking
TS EN 14530 Workplace air - Determination of diesel particulates - General rules
TS EN 14583 Workplace air - Volumetric bioaesol sampling devices - Rules and test methods
TS ISO 14592-1 Water quality - Evaluation of aerobic biodegradability of organic compounds at low concentrations - part 1: Batch experiment with shaking balloons using surface water or surface water / sediment suspension
TS ISO 14592-2 Water quality - Assessment of aerobic biodegradability of organic compounds at low concentrations - Part 2: Continuous flow river model carrying biomass
TS EN ISO 14593 Water quality - Evaluation of the final aerobic biodegradability of organic compounds in aqueous media - Inorganic carbon analysis method in sealed containers (c02 test in liquid cavity)
TS EN 14593-1 Respiratory protection devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with full face mask - Rules, tests, marking "
TS EN 14593-2 Respiratory protection devices - Compressed air line breathing apparatus with demand valve - Part 2: Positive pressure half mask apparatus - Rules, tests, marking "
TS EN 14593-2 / AC Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Positive pressure half mask apparatus - Rules, tests, marking "
TS EN 14594 Respiratory protection devices - Continuous flow pressure air line breathing apparatus - Rules, tests, marking "
TS EN 14594 / AC Respiratory protection devices - Continuous flow pressure air line breathing apparatus - Rules, tests, marking "
TS EN 14596 Tanks for transporting dangerous goods Service equipment for tanks Emergency relief valve
TS EN 14604 Smoke alarm devices
TS EN 14604 Smoke alarm devices
TS EN 14604 / AC Smoke alarm devices
TS EN 14604 / AC Smoke alarm devices
TS EN 14605 + A1 Protective clothing - Against liquid chemicals - Wear waterproof (type 3) or spray proof (type 4) joints, including those that provide protection to only part of the body (type pb [3] and type pb [4]) Performance features for
TS EN 14614 Water quality - standard guide for the assessment of river hydromorphological characteristics.
TS EN 14622 Devices used to prevent contamination by backflow in potable water - Return, flooded (restricted) air gap - Family a, type f
TS EN 14623 Apparatus used to prevent contamination by backflow in potable water - Air gaps with minimum return flow (verified by measurement and test) - Family a, type g
TS EN 14625 Ambient air quality - Standard method for the determination of carbon monoxide concentration by infrared spectroscopy without wavelength separation
TS EN ISO 14644-3 Clean rooms and associated environments-Part 3-Test methods
TS EN ISO 14644-4 Clean rooms and associated environments - Part 4: Design, construction and commissioning
TS EN ISO 14644-7 Clean rooms and associated controlled environments - Part 7: Separating devices (clean air hoods, gloveboxes, insulators and mini-environments)
TS EN ISO 14644-5 Clean rooms and associated environments - Part 5: Operation
TS EN ISO 14644-6 Clean rooms and associated environments - Part 6: Terms and definitions
TS EN 14662-1 Ambient air quality - Standard method for the determination of benzene concentrations - Part 1: Pump sampling and subsequent thermal desorption and gas chromatography
S EN 14662-4 Ambient air quality - Standard method for the determination of benzene concentrations - Part 4: Diffuse sampling followed by thermal desorption and gas chromatography
TS EN 14662-5 Ambient air quality - Standard method for the determination of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chomatography
TS EN 14662-2 Ambient air quality - Standard method for the determination of benzene concentrations - Part 2: Solvent desorption and gas chromatography following pump sampling
TS EN 14671 Characterization of sludges - Pretreatment for the determination of ammonia extractable using 2 mol / l potassium chloride
TS EN 14672 Characterization of sludges- Determination of total phosphorus
TSE ISO / TR 14697 Fire tests - Guidance on selection of substrate for construction products
TSE ISO / TR 14697 Fire tests - Guidance on selection of substrate for construction products
TS EN ISO 14698-2 / AC Clean rooms and connected controlled environments - Biological contamination control - Part 2: Evaluation and interpretation of biological contamination data
TS EN 14701-3 Characterization of sludges - Filtration properties - Part 3: Determination of compressibility
TS EN 14701-1 Characterization of sludges - Draining properties - Part 1: Absorption time from capillaries (stop)
TS EN 14702-1 Characterization of sludges - Sedimentation properties - Part 1: Determination of sedimentation properties (determination of sludge volume ratio and sludge volume index)
TS EN 14702-2 Characterization of sludges - Precipitation properties - Part 2: Determination of thickening
TS EN 14710-2 + A2 Fire-fighting pumps - Non-primer centrifugal pumps for fire-fighting - Part 2: Verification of general and safety rules
TS EN 14735 Characterization of wastes - Preparation of waste samples for ecotoxicity tests
TS EN 14735 / AC Characterization of wastes - Preparation of waste samples for ecotoxicity tests
TS EN 14750-1 Railway applications - Ventilation for urban and suburban towing and towing vehicles - Part 1: Comfort parameters
TS EN 14750-2 Railway applications - Ventilation for urban and suburban towing and towing vehicles - Part 2: Type tests
TS EN 14786 Protective clothing - Determination of resistance to penetration of sprayed liquid chemicals, emulsions and dispersions - Atomizer test
TS EN 14797 Explosion and ventilation systems
TS ISO 14869-1 Soil quality - Dissolution for determination of total element content - Part 1 - Dissolution with hydrofluoric and perchloric acids
TS ISO 14870 Soil quality - Extraction of trace elements using buffered dtpa solution
TS ISO 14870 / T1 Soil quality - extraction of trace elements using buffered dtpa solution
TS EN ISO 14877 Protective clothing for abrasive blasting using granular abrasives
TS EN 14884 Air quality - Constant welding emissions - Determination of total mercury - Automatic measuring systems
TS EN 14898 + A1 Indoor water conditioning equipment - Active material filters - Performance safety and test rules
TS EN 14899 Identification of waste - Sampling from waste material - Framework for the preparation and implementation of a sampling plan
TS EN 14902 Ambient air quality - Standard method for measuring pb, cd, as and ni in suspended particles in pm10 fraction
TS EN 14902 / AC Ambient air quality - Standard method for measuring suspended particles in pb, cd, as and ni in pm10 fraction
TS EN ISO 14911 Water quality Determination of li +, na +, nh4, mn2 +, ca2 +, mg2 +, sr2 + and ba2 + dissolved in water and wastewater - Ion chromatography method
TS EN ISO 14911 Water quality Determination of li +, na +, nh4, mn2 +, ca2 +, mg2 +, sr2 + and ba2 + dissolved in water and wastewater - Ion chromatography method
TS EN 14934 Thermal insulation and light weight filling products for civil engineering applications - Fabricated extruded polystyrene foam (xps) - Specification
TS EN 14944-3 The effect of cementitious products on human consumption waters - Test methods - Part 3: Release of substances from factory-made cementitious products
TS EN 14962 Water quality - Guidance on the scope and selection of fish sampling methods
TS ISO 14965 Air quality-Determination of total organic compounds except methane-Cryogenic concentration and direct flame ionization method
TS EN 14968 Semantics for groundwater data exchange
TS EN 14987 Plastics - Evaluation of plastic disposability in wastewater treatment plants - Test scheme for final acceptance and properties
TS EN 14994 Gas explosion protection systems
TS EN 14995 Plastics - Evaluation of composition stability - Test chart and properties
TS EN 14996 Water quality - Guidance on the quality assurance of biological and ecological assessments in aqueous environments
TS EN 15004-3 Stationary fire-fighting systems - Gas-jet systems - Part 3: Design and physical properties of gas-jet systems for Hcfc mixture a extinguishing media
TS EN 15004-5 Stationary fire fighting systems - Gas-jet systems - Part 5: Design and physical properties of gas-jet systems for HCN 227 extinguishing media only
TS EN 15004-6 Stationary fire fighting systems - Gas-jet systems - Part 6: Design and physical properties of gas-jet systems for Hfc 23 extinguishing media
TS EN 15004-7 Stationary fire fighting systems - Gas-jet systems - Part 7: Design and physical properties of gas-jet systems for Ig-01 extinguishing media
TS EN 15004-8 Stationary fire fighting systems - Gas-jet systems - Part 8: Design and physical properties of gas-jet systems for Ig-100 extinguishing media
TS EN 15004-9 Stationary fire fighting systems - Gas-jet systems - Part 9: Design and physical properties of gas-jet systems for Ig-55 extinguishing media
TS EN 15004-4 Stationary fire fighting systems - Gas-jet systems - Part 4: Design and physical properties of gas-jet systems for Hfc 125 extinguishing media
TS EN ISO 15011-4 / A1 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke data sheet
TS EN ISO 15011-3 Health and safety in welding and related processes - Laboratory method for sampling fumes and gases from arc welding - Part 3: Determination of ozone concentration using fixed point measurements during arc welding
TS EN ISO 15011-4 Health and safety in welding and related processes - Laboratory sampling method of fumes and gases - Part 4: Smoke datasheet
TS EN 15080-8 Extended application of the results of fire resistance tests - Part 8: Beams
TS EN ISO 15088 Water quality - Determination of acute toxicity of wastewater to zebrafish eggs
TS ISO 15089 Water quality - Guidelines for the determination of treatment plant residues and pesticides by selective immunoassays
TS EN 15089 Explosion insulation systems
TS EN 15110 Water quality - Guidance standard for sampling zooplankton from still waters
TS EN 15170 Characterization of sludge - Determination of calorific value
TS EN ISO 15175: 2011 Soil quality - Soil classification for the protection of groundwater
TS ISO 15176 Soil quality - Characteristics of excavated soil and other soil materials intended for reuse
TS ISO 15178 Soil quality - Determination of total sulfur by dry combustion
TS EN 15178 Elements for product promotion in emergency inquiries
TS EN 15188 Determination of spontaneous flammability of dust deposits
TS EN 15192 Characterization of waste and soil - Determination of chromium (vi) in solids by using alkaline fractionation and spectrophotometric identification ion chromatography
TS EN 15192 Characterization of waste and soil - Determination of chromium (vi) in solids by using alkaline fractionation and spectrophotometric identification ion chromatography
TS EN 15196 Water quality - Guidelines for sampling and processing of pupal exuviae of chironomidae (order diptera) for ecological assessment
TS EN 15198 Risk assessment methodology for non-electrical equipment and components intended for use in potentially explosive atmospheres
TS EN 15204 Water quality - Standard guide for counting phytoplankton using modified microscopy (utermöhl technique)
TS EN 15216 Properties of wastes-Determination of total dissolved solids (tds) in water and eluates
TSE CEN / TR 15230 Workplace air- Sampling guide for aerosol fractions that can be inhaled thoracic and lungs
TS EN 15233 Functional safety assessment methodology of protective systems for potentially explosive atmospheres
TS EN 15254-5 Comprehensive application of results from fire resistance tests - Non-bearing walls - Part 5: Metal sandwich panel construction
TS EN 15254-2 Comprehensive application of results from fire resistance tests - Non-bearing walls - Part 2: Masonry and gypsum blocks
TS EN 15259 Air quality - Measurement of constant source emissions - Requirements for measuring zones and locations, purpose, plan and reporting of measurement
TS EN 15267-2 Air quality - Certification of automatic measuring systems - part 2: Initial assessment of the quality management system of automatic measuring system (ams) manufacturers and final certification supervision for production processes
TS EN 15269-7 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, blinds and openable window fittings (including building components) - Part 7: Fire resistance for steel sliding door sets
TS EN 15269-20 Comprehensive application of the results obtained from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including structural elements) - Part 20: Hinged and studded glazed doors with steel, timber and metal frames
TS EN 15269-1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 1: General rules
TS EN 15308 Identification of wastes - Determination of polychlorinated biphenyls (pcbs) in selected solid waste using capillary gas chromatography with electron capture or mass spectrometer detection
TS EN 15308 Identification of wastes - Determination of polychlorinated biphenyls (pcbs) in selected solid waste using capillary gas chromatography with electron capture or mass spectrometer detection
TS EN 15308 Identification of wastes - Determination of polychlorinated biphenyls (pcbs) in selected solid waste using capillary gas chromatography with electron capture or mass spectrometer detection
TS EN 15309 Characterization of waste and soil - Determination of elemental composition using X-ray fluorescence method
TS EN 15309 Characterization of waste and soil - Determination of elemental composition using X-ray fluorescence method
TS EN 15333-2 Breathing apparatus - Open circuit, gas supply at the hub level - Part 2: Free flow device
TS EN 15342 Plastics - Recycled plastics - Characterization of recycled components from polystyrene (ps)
TS EN 15343 Plastics - Recycled plastics - Traceability of plastic recovery, conformity assessment and recovery content
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled components from polyethylene (pe)
TS EN 15423 Ventilation systems for buildings - Fire precautions for air distribution systems in buildings
TS EN 15445 Leakage and diffuse emissions, common concern of industrial sectors - Characterization of fugitive dust sources by reverse dispersion modeling
TS EN 15446 Leakage and widespread emissions, common concern of industrial sectors - Measurement of leakage water vapor emissions from equipment and pipe cracks
TS EN 15460 Water quality - Guidance standard for the investigation of macrophytes in lakes
TSE ISO / TR 15462 Water quality - Selection of experiments for determination of biodegradability
TS EN 15483 Ambient air quality - near-surface atmospheric measurements by FTIR spectroscopy
TS EN 15507 Packaging - Transport packaging for dangerous goods - Comparative material test of polyethylene grades
TS EN 15518-2: 2011 Winter maintenance equipment-Road weather information systems-Part 2: Road weather-Recommended observation and forecasting
TS EN 15518-3: 2011 Winter maintenance equipment-Road weather information systems-Part 3: Characteristics of measured values of stationary equipment
TS EN 15518-1: 2011 Winter maintenance equipment-Road weather information systems-Part 1: Global recipes and components
TS ISO 15522 Water quality - Determination of the inhibitory effect of water components on the growth of activated sludge microorganisms
TS EN 15527 Identification of wastes - Determination of polycyclic aromatic hydrocarbons (chamfer) in solid waste using gas chromatography mass spectrometry (gc / ms)
TS EN ISO 15536-1 Ergonomics- Computer mannequins and body templates - Part 1: General rules
TS EN ISO 15536-2 Ergonomics - Computer mannequin software and body models - Part 2: Verification of functions and validation of dimensions for computer mannequin software systems
TS EN ISO 15537 Principles for the selection and use of subjects for anthropometric testing of industrial products and designs "
TS EN 15597-1 Winter care equipment-Icing protection machines-Part 1: General rules and recipes for Icing protection machines
TS EN 15614 Protective clothing - For firefighters - Laboratory test methods and performance rules for non-residential clothing
TS EN 15659 Safe storage units - Classification and test methods for fire resistance - First fire storage units
TS EN 15659 Safe storage units - Classification and test methods for fire resistance - First fire storage units
TS EN ISO 15681-1 Water quality - Determination of orthophosphate and total phosphorus content by flow analysis (fias vecfa) - Part 1: Flow injection analysis method
TS EN ISO 15681-2 Water quality - Determination of orthophosphate and total phosphorus content by flow analysis (fias vecfa) - Part 2: Continuous flow analysis method
TS EN ISO 15682 Water quality-Flow analysis (SAA and AAE) and determination of chloride by photometric or potentiometric method
TS EN 15708 Water quality - Guidance standard for research, sampling and laboratory analysis of phytobentoses in shallow streams
TS ISO 15709 Soil quality - Soil water and unsaturated zone - Definitions, symbols and theory
TS EN 15713 Safe disposal of confidential material - Application rules
TS EN ISO 15743 Thermal environment ergonomics - Cold work areas - Risk assessment and management
TS EN 15767-2 Portable equipment for the extension of extinguishing agents fed by fire fighting pumps - Portable monitors - Part 2: Water sprayers
TS EN 15767-1 Portable equipment for extending extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General rules for portable monitor assemblies
TS EN ISO 15839 Water quality - Sensors / analyzer even for water - Features and performance test
TS EN 15841 Ambient air quality - Standard method for the determination of arsenic, cadmium, lead and nickel in air
TS EN 15843 Water quality - Guidance standard for the determination of the degree of change in river hydromorphology
TS EN 15848 Water treatment equipment inside buildings - Chemical dosing system - Features for performance, safety and testing
TS EN 15852: 2010 Environmental air quality - Standard method for the determination of total gas mercury
TS EN 15853: 2010 Ambient air quality - Standard method for the determination of total mercury deposition
TS EN 15859 Air quality - Documentation of monitoring of automatic dust collection facilities for use in stationary welds - Performance criteria and test procedures
TS EN 15882-3 Comprehensive application of results from fire resistance tests in service plants - Part 3: Sealing seals
TS EN ISO 15913 Water quality - Determination of selected phenoxyalkanoic herbicides containing bentazones and hydroxybenzonitriles after solid phase extraction and derivatization using gas chromatography and mass spectrometry
TS EN 15980: 2011 Air quality-Benz [a] anthracene, benzo [b] fluoranthene, benzo [j] fluoranthene, benzo [k] fluoranthene, benzo [a] pyrene, dibenz [a, h] anthracene and indeno [1,2,3- Cd] determination of pyrene filler "
TS EN 15998: 2010 Glass - Used in buildings - Safety during fire, fire resistance - Methodology for testing glass for classification purposes
TS EN ISO 16000-5-indoor air - Part 5: Sampling strategy of volatile organic compounds
TS EN ISO 16000-7 Indoor air - Part 7: Sampling strategy for the determination of asbestos fiber concentrations in air
TS EN ISO 16000-15 Indoor air - Part 15: Sampling strategy for nitrogen dioxide (no <(index) 2>)
TS EN 16000 Plastic pipe systems - Indoor systems - Mounting and fixing of components in a test device that generates a thermal effect with a single combustion unit
TS EN ISO 16000-1 Indoor air - Part 1: General principles of sampling strategy
TS EN ISO 16000-2 Indoor air - Part 2: Sampling strategy for formaldehyde
TS EN ISO 16000-12 Indoor air - Part 12: Sampling strategies for polychlorinated biphenyls (pcbs), polychlorinated dibenzo-P-Dioxins (pcdds), polychlorinated dibenzofurans (pcdfs) and polycyclic aromatic hydrocarbons (pahs)
TS EN ISO 16017-1 Internal ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Sampling by pump
TS EN ISO 16017-1 Internal ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Sampling by pump
TS EN ISO 16017-2 Indoor, ambient and workplace air - Sampling and analysis of volatile compounds via absorbent tube / thermal desorption / capillary gas chromatography-Part2: Diffuse sampling
TS EN ISO 16103 Packaging - Transport packaging of dangerous goods - Recycled plastic material "
TS EN ISO 16106 Packaging - Transport packages for dangerous goods - Hazardous commodity packages, medium bulk containers (ODK) and large packages - Guidance on the application of ISO 9001
TS EN ISO 16133: 2011 Soil quality - Guidance on installation and maintenance of imaging methods
TS EN ISO 16133: 2011 Soil quality - Guidance on installation and maintenance of imaging methods
TS ISO 16221 Water quality - Guidance for the determination of biodegradability in the marine environment
TS EN ISO 16266 Water quality-Determination and counting of Pseudomonas aeruginosa-Membrane filtration method
TS EN ISO 16588 / A1 Water quality-Determination of six-component substances-Gas chromatography method
TS EN ISO 16712 -water quality - Determination of fatal toxicity on amphipods of marine or river sediments
TS EN ISO 16712 -water quality - Determination of fatal toxicity on amphipods of marine or river sediments
TS EN ISO 16720 Soil quality - Freezing of samples for further analysis - Pretreatment by drying
TS EN ISO 17287 Road vehicles - Ergonomic features of transport information and control systems - Determining / evaluating the proper use during driving
TS EN ISO 17294-1 -water quality - Application of inductive double plasma mass spectrometry (ICP-Ms) - Part 1: General guide
TS EN ISO 17353 Water quality - Determination of tinned organic compounds - Gas chromatography method
TS EN ISO 17624 Acoustics - Guidance on noise control in offices and work environments through acoustic screens
TS EN ISO 17652-4 Welding - Workshop test for welding and related processes - Part 4: Smoke and gas emission
TSE CEN ISO / TS 17892-11 Geotechnical surveys and tests- Soil laboratory tests- Part 11: Determination of permeability by constant and falling level test method
TSE CEN ISO / TS 17892-7 Geotechnical surveys and tests- Soil laboratory tests- Part 7: Uniaxial pressure test on fine-grained soil
TSE CEN ISO / TS 17892-7 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 7: Uniaxial pressure test on fine-grained soil
TSE CEN ISO / TS 17892-8 Geotechnical surveys and tests- Soil laboratory tests- Part 8: Three-axis pressure test without consolidation and drainage
TSE CEN ISO / TS 17892-8 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 8: Three-axis pressure test without consolidation and drainage
TSE CEN ISO / TS 17892-9 Geotechnical surveys and tests- Soil laboratory tests- Part 9: Consolidation triaxial pressure test on water-saturated soil
TSE CEN ISO / TS 17892-10 Geotechnical surveys and tests- Soil laboratory tests- Part 10: Direct shear test
TSE CEN ISO / TS 17892-11 / AC Geotechnical surveys and tests - Soil laboratory tests - Part 11: Determination of permeability by constant and falling level test method
TSE CEN ISO / TS 17892-12 Geotechnical surveys and tests- Soil laboratory tests- Part 12: Determination of Atterberg limits
TSE CEN ISO / TS 17892-12 / AC Geotechnical surveys and tests- Soil laboratory tests- Part 12: Determination of Atterberk limits
tst EN ISO 17994 Criteria for ensuring equivalence between water quality and microbiological methods
TS EN ISO 18856 Water quality - Determination of some phthalates by gas chromatography / mass spectrometry
TS EN ISO 18857-1 Water quality - Determination of specific alkylphenols - Part 1: Determination method for unfiltered samples using liquid liquid extraction and mass selective gas chromatography
TS EN ISO 19258: 2011 Soil quality - Guidance for determination of background values
TS EN ISO 20079 Water quality - Determination of toxicity on plants (lemna minor) in river beds of water components and wastewater - Inhibition of growth in plants
TS EN ISO 20344 / tst T1 Personal protective equipment - Test methods for footwear
TS EN ISO 20963: 2011 Soil quality - Effects of pollutants on insect larvae (oxythyrea funesta) - Determination of acute toxicity
TS EN ISO 21427-2 / AC Water quality- Evaluation of genototoxicity by micronucleid induction measurements - Part 2: Mixed population method using cell line v79
TS EN ISO 21427-2 Water quality- Evaluation of genototoxicity by measurements of micronucleid induction - Part 2: Mixed population method using cell line v79
TS EN ISO 22032 Water quality - Determination of selected polybrominated diphenylether in sewage sludge and sediment - Gas chromatography / mass spectroscopy and extraction method.
TS EN ISO 22478 Water quality - Determination of specific explosives and similar compounds - High performance liquid chromatography (gc-Ecd and / or gc-Ms determination) method with UV determination
TS EN ISO 22610 Surgical drapes, garments and fresh air garments used as medical devices for patients, hospital staff and equipment - Test method for determination of resistance to wet bacterial permeability (iso 22610: 2006)
TS EN ISO 22612 Garments for protection against contaminants - Test method for resistance to dry miclrobic permeability
TS EN ISO 23210 Constant source emissions - Determination of mass concentration of pm10 / pm2,5 in waste gases - Measurement of low concentrations with impactors
TS EN ISO 23470: 2011 Soil quality - Determination of the cation exchange capacity of ethics using hexamincobalt trichloride solution
TS EN ISO 23611-4: 2011 Soil quality- Sampling from soil invertebrates-Section 4: Sampling, extraction and identification of soil nematodes
TS EN ISO 23611-4: 2011 Soil quality- Sampling from soil invertebrates-Section 4: Sampling, extraction and identification of soil nematodes
TS EN ISO 23631 Water quality - Determination of dalapon, trichloroacetic acid and certain halogenated acetic acids - Liquid-liquid extraction and gas chromatography after derivatization (determination of gc-Ecd and / or gc-Ms)
TS EN ISO 23631 / AC Water quality - Determination of dalapon, trichloroacetic acid and certain halogenated acetic acids - Gas chromatography after liquid-liquid extraction and derivatization (determination of gc-Ecd and / or gc-Ms)
TS EN ISO 23753-1: 2011 Soil quality-Determination of dehydrogenase activity in soil-Part 1: Method using triphenyltetrazolium chloride (ttc)
TS EN 27201-2 Fire extinguishing agents - Halogenated hydrocarbons Part 2: Rules for the safe handling and transport of Halon 1211 and 1301
TS EN 27243 Hot environments - Estimation of heat pressure on the worker according to Wbgt (wet - chamber temperature) index
TS EN ISO 28439: 2011 Workplace air - Characteristics of ultra fine aerosol / non-aerosol - Determination of numerical concentration and particle distribution using differential electrical mobility analysis systems
TS EN 28662-1 Hand-held portable power tools - Measurement of vibration in the handle section 1: General
TS EN ISO 28927-4: 2010 Hand-held portable power tools-Measurement of vibration in the handle-Section 4: Grinders
TS EN ISO 28927-10: 2011 Hand-held portable power tools - Test for measuring vibration in the handle - Part 10: Impact drills, hammers, hammers
TS EN ISO 28927-2 Hand-held portable power tools - Test methods for measuring vibration - Part 2: Switches. screwdrivers and wrenches
TS EN ISO 28927-6 Hand-held portable power tools - Test methods for measuring vibration - Part 6: Rammers
TS EN ISO 28927-8 Hand-held portable power tools - Test methods for measuring vibration - Part 8: Circular saws and files or oscillating and rotary saws
TS EN ISO 28927-9 Hand-held portable power tools - Measurement of vibrations in the handle - Part 9: Scaler hammers and needle scrapers
TS EN ISO 28927-1 Hand-held portable power tools - Test methods for measuring vibration - Part 1: Angle and vertical grinding machines
TS EN ISO 28927-11: 2011 Hand-held portable power tools - Test methods for measuring vibration - Part 11: Stone hammers
tst EN ISO 8996 Thermal environment ergonomics - Determination of metabolic rate
tst EN ISO 8996 Thermal environment ergonomics - Determination of metabolic rate
tst EN 60707 Test methods for the determination of the ignition properties of solid electrical insulation materials exposed to the influence of a burning source
TS EN 45510-4-6 Power plants - Supply guide for equipment - Part 4: Boiler ancillary plants - Part 6: Equipment for the removal of flue gas from sulfur oxides (sox)
TS EN 45510-4-10 Power plants-Supply guide for equipment-Section 4-10: Boiler ancillary plants-Equipment for the removal of flue gas from nitrogen oxides
TS EN 50131-1 / tst IS1 Alarm systems - against intrusion - Part 1: General rules
TS EN 50131-1 / IS2 Alarm systems - Intrusion and panic alarm systems - part 1: System requirements
TS EN 50131-1 / A1 Alarm systems - Intrusion and panic alarm systems -Chapter 1: System rules
TS EN 50131-5-3 Alarm systems - Anti-intrusion systems - Rules for interconnected equipment using radio frequency techniques "
TS EN 50131-6 Warning systems - Intrusion systems - Part 6: Power supplies
TS EN 50131-1 Alarm systems - Intrusion and panic alarm systems - part 1: System requirements
TS EN 50131-1: 2006 / A1: 2009 Alarm systems - against unauthorized access - Part 1: General rules
TS EN 50134-1 Alarm systems - Social (public) alarm systems - Part 1: System features
TS EN 50134-2 Alarm systems - Social (public) alarm systems - Part 2: Trigger devices
TS EN 50134-5 Alarm systems - Social alarm systems - Part 5: Interconnection and communication
TS EN 50194-1 Electrical devices for the detection of flammable gases in households and similar places - Part 1: Test methods and performance requirements
TS EN 50194-2 Electrical apparatus for the detection of combustible gases used in buildings - Part 2: Electrical apparatus for continuous operation in a fixed installation in similar buildings with fairground vehicles - Additional test methods and performance requirements
TS EN 50264-2-1 Railway applications-Special fire performance railway vehicles power and control cables-Section 2-1: Cross-linked elastomeric insulation-Single core cables
TS EN 50264-3-2 Railway applications-Power and control cables of special fire performance railway vehicles-Section 4: Reduced cross-section and cross-linked elastomeric insulation-Multi-core cables
TS EN 50264-2-2 - Part 2-2: Cables with crosslinked elastomeric insulation - Multicore cables
TS EN 50271: 2010 Electrical devices for the detection and measurement of combustible gases, toxic gases or oxygen - Specification and tests for devices using software and / or digital technologies
TS EN 50289-4-11 Communication cables-Test methods for test methods-Part 4-11: Environmental test methods-Integrated horizontal fire test method
TS EN 50289-4-12 Communication cables - Requirements for test methods - Part 4-12: Environmental test methods - Vertical flame propagation test in small bundled communication cables
TS EN 50291-2 Household and similar electrical appliances for the detection of carbon monoxide gas - Part 2: Permanently installed electrical equipment for recreational vehicles and similar use on a cruise boat - Additional test methods and performance characteristics
TS EN 50291-1 Household and similar electrical appliances for the detection of carbon monoxide - Part 1: Test methods and performance characteristics
TS EN 50305 Railway applications-Railway vehicle cables with special fire performance-Test methods
TS EN 50306-1 Railway applications - Cables with special fire performance for towing and towing vehicles - Thin-walled - Part 1: General requirements
TS EN 50306-2 Railway applications - Cables with special fire performance for towing and towing vehicles - Thin-walled - Section 2: Single core cables
TS EN 50306-3 Railway applications - Cables with special fire performance for towing and towing vehicles - Thin-walled - Section 3: Single and multi-core cables with thin wall covering and shield (shielded) (double, triple, quadruple)
TS EN 50306-4 Railway applications - Special fire performance cables for towing and towing vehicles - Thin-walled - Section 4: Bstandard wall-covered, multi-core and multiple double cables
TS EN 50321 Electrically insulated footwear for working in low voltage installations
TS EN 50321 Electrically insulated footwear for working in low voltage installations
TS EN 50365 Electrically insulated caps for use in low voltage installations
TS EN 50365 Electrically insulated caps for use in low voltage installations
tst EN 50392 General standard for the conformity of basic restrictions on electronic and electrical equipment in electromagnetic fields (0 hz-300hz) to which people are exposed.
TS EN 50420 Basic standard for the assessment of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 mhz - 40 ghz)
TS EN 50421 Product standard (30 mhz - 40 ghz) for demonstrating the suitability of broadcast transmitters with basic restrictions or reference levels in relation to human exposure to radiofrequency electromagnetic fields
TS EN 50486 Hardware used in door entry systems for audio and video
TS EN 50495 Safety devices for safe operation of equipment against explosion risks
TS EN 50508 Multi-purpose insulating rods for electrical operations in high-voltage installations
TS EN 50519 Evaluation of exposure of employees to electrical and magnetic fields from industrial induction heating equipment
50543: 2011 / AC: 2011 Electronic portable equipment designed for the measurement and detection of carbon dioxide and / or carbon monoxide in indoor air - Specifications and test methods
TS EN 50543: 2011 Electronic portable equipment designed for the measurement and detection of carbon dioxide and / or carbon monoxide in indoor air - Specifications and test methods
TS EN 60079-29-4 Electrical devices - Used in explosive atmospheres - Part 29-4: Gas detectors - Performance characteristics of open road detectors for combustible gases
Safety regulations - For household and similar electrical appliances - Part 2005-60335: Particular requirements for roasters, grills and similar portable cooking appliances TS EN EN 2-9-2 / A2
TS EN 60512-20-2 Electromechanical components for electronic devices-Basic test procedures and measuring methods-Part 20-2: Test 20b- Flammability tests-Fire resistance
TS EN 60601-1-3 Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for radiation protection in the x-ray device for diagnostic purposes
TS EN 60601-2-44 Electrical medical devices - Part 2-44: Particular requirements for the safety of x-ray equipment in computed tomography
60601-1-3 / AC: 2010 Electrical medical devices section 1: General rules for safety - Part 1.3 standard for general diagnostic purposes for the protection of radiation in the x-ray device for diagnostic purposes
TS EN 60645-5 Electroacoustic - Sound measuring equipment - Part 5: Instruments used for measuring auditory acoustic impedance / admittance
TS EN 60695-6-1 Fire hazard test - part 6-1: Visibility blocking by smoke - General guide
60695-7-1: 2010 Fire hazard test - Part 7-1 - Toxicity of combustion products - General guide
TS EN 60832-1 Working under voltage - Insulating rods and connecting devices - Part 1: Insulating rods
TS EN 60832-2 Working under voltage - Insulating bars and connection devices - Part 2: Connection devices
TS EN 60849 Sound systems for emergencies
TS EN 60895 Working under voltage - Conductive clothing for use at rated voltage up to 800 kv aa and ± 600 kv d.a
TS EN 60895 Working under voltage - Conductive clothing for use at rated voltage up to 800 kv aa and ± 600 kv d.a
TS EN 60984 Sleeves - insulating material - for working under tension
TS EN 60984 Sleeves - insulating material - for working under tension
TS EN 60984 / A1 Sleeves - Insulating material - For working under tension
TS EN 60984 / A1 Sleeves - Insulating material - For working under tension
TS EN 60984 / A11 Sleeves - Insulating material - For working under tension
TS EN 60984 / A11 Sleeves - Insulating material - For working under tension
TS EN 61098 Radiation protection devices - Auxiliary devices for monitoring surface contamination of personnel installing the plant
TS EN 61111 Working under voltage - Electrical insulation coating
TS EN 61112 Working under voltage - Electrical insulation covers
TS EN 61229 Protective covers - Rigid - For working under voltage in AA installations
TS EN 61235 Insulated hollow tubes for electrical work
TS EN 61243-1 Operating under voltage - Voltage detectors - Section 1: Capacitive type used for voltages exceeding 1 kv a.a
TS EN 61243-2 Operating under voltage - Voltage detectors - Part 2: Resistive type used for voltages from 1 kv to 36 kv aa
TS EN 61243-5 Operating under voltage - Voltage detectors - part 5: Voltage sensing systems (gas)
TS EN 61243-1 / A1 Operating under voltage - Voltage detectors - Part 1: Capacitive type used for voltages exceeding 1 kv a.a
TS EN 61249-2-22 Materials and other interconnection structures for printed circuits - Part 2-22: Reinforced base materials without sheath and sheath - Modified non-halogen epoxide wool e-Glass laminate sheets with copper sheath, defined as flammability (vertical combustion test)
TS EN 61249-2-26 Materials for printed circuits and other interconnection structures - Part 2-26: Reinforced base materials without sheath and sheath - Non-halogenated epoxide wool / woolen e-Glass reinforced laminate sheets with non-halogenated epoxide wool / wool sheathed
TS EN 61249-2-36 Materials for printed circuit boards and other interconnection structures - Part 2-36: Reinforced base materials, coated and uncoated - Flammability defined (vertical ignition test), epoxy fabric e-Glass sheets, for lead-free assembly copper plating
TS EN 61318 Working under voltage - Appropriate assessment of instruments, devices and equipment
TS EN 61478 / A1 Working under tension - Ladders with insulating material
TS EN 61479 / A1 Working under stress - Covering of insulating materials with flexible conductor
TS EN 61481 / A2 Operating under voltage - Portable phase comparators for alternating current voltages from 1 kv to 36 kv
TS EN 61481 / A1 Operating under voltage - Portable phase comparators for alternating current voltages from 1 kv to 36 kv
TS EN 61482-1-1 Working under voltage-Protective clothing against electric arc thermal effects-Part 1-1: Test methods-Method 1: Determination of arc rated values of flame resistance of materials for clothing (atpv or e <(index) bt50>)
TS EN 61508-5 Functional safety in safety-related electrical or electronic or programmable electronic systems - Part 5: Example methods for determining safety integrity levels
TS EN 61511-1 Functional safety - Safety instrumented systems for the process industry - Part 1: Framework, recipes, system, hardware and software rules
TS EN 61800-5-2 Speed-adjustable electric power drive systems - Part 5-2: Safety rules -Functional
TS EN 62061 Machine safety - Functional safety of electrical, electronic and programmable electronic control systems for safety
TS EN 62061: 2005 / AC: 2010 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
TS EN 62192 Working under tension - Insulating ropes
TS EN 62193 Working under stress - Telescopic rods and telescopic measuring rods
TS EN 62226-1 Exposure to electric and magnetic fields in the low and intermediate frequency range - Induced current density in the human body and methods of calculating the internal electric field - Part 1: General "
TS EN 62226-2-1 Exposure to electrical and magnetic fields in the low and intermediate frequency range - Induced current density in the human body and methods of calculating the internal electric field - Part 2-1: Exposure to magnetic fields - 2b models "
TS EN 62237 Working under stress - Insulating hoses with fittings - For use with hydraulic tools and fittings
TS EN 62244: 2011 Radiation protection instrumentation - Mounted radiation imagers for the detection of radioactive and special nuclear materials at national borders
TS EN 62327: 2011 Radiation protection instrumentation - Detection and identification of radionuclides and hand-held devices for the indication of the velocity equal to the ambient dose from photon radiation
TS EN 62439-1 Industrial communication networks - High availability automation network - Part 1: General concepts and calculation methods
TS EN 62439-2 Industrial communication networks - High availability automation network - Part 2: Media redundancy protocol (mrp)
tst EN ISO 14855-1 Plastics - Determination of degradation and final aerobic biological degradation under controlled digestion conditions - Method of analysis of released carbon dioxide
TS EN 50131-4 Alarm systems - against intrusion - Part 4: Warning devices
TS EN 50264-1 Railway applications-Railway locomotive and wagon cables with special fire performance-Standard wall-Part 1: General features
TS EN ISO 14159 Safety in machinery - Hygiene requirements for the design of machinery
TS 6289 ISO 6333 Water quality-Determination of manganese-Formaldoxime spectrometric method
TS 6289 ISO 6333 Water quality-Determination of manganese-Formaldoxime spectrometric method
TS EN ISO 5667-23: 2011 Water quality - Sampling - Part 23: Guidelines for passive sampling of surface waters
TS EN ISO 5667-23: 2011 Water quality - Sampling - Part 23: Guidelines for passive sampling of surface waters