Testing, inspection and certification services of all the following standards related to Paints and Varnishes are provided by our company.
TS 6614 EN 23270 Paints and varnishes and their raw materials - Temperature and humidity for conditioning and testing
TS EN ISO 4617 Paints and varnishes - List of equivalent terms
TS EN ISO 8130-1 (Formerly: TS ISO 8130-1) Coating powders - Part 1: Determination of particle size distribution by sieving
TS EN ISO 8130-2 Coating powders - Part 2: Determination of density by gas comparison pycnometer (reference method)
Coating powders - Part 8130: Density determination by liquid displacement pycnometer TS EN ISO 3-8130 (Former no: TS ISO 3-3)
TS EN ISO 8130-4 (Formerly: TS ISO 8130-4) Coating powders - Part 4: Calculation of the lower explosion limit
TS EN ISO 8130-5 (Formerly: TS ISO 8130-5) Coating powders - Part 5: Determination of the flow properties of the powder / air mixture
TS EN ISO 8130-6 (Formerly: TS ISO 8136-6) Coating powders - Part 6: Determination of the gelling time of thermoset coating powders at a given temperature
TS EN ISO 8130-7 (Formerly: TS ISO 8130-7) Coating powders - Part 7: Determination of mass loss by firing
TS EN ISO 8130-8 (Formerly: TS ISO 8130-8) Coating powders - Part 8: Evaluation of storage stability of thermoset powders
TS EN ISO 8130-10 (Formerly: TS ISO 8130-10) Coating powders - Part 10: Determination of deposition efficiency
TS EN ISO 8130-11 Coating powders - Part 11: Curved surface flow test
TS EN ISO 8130-12 (Formerly: TS ISO 8130-12) Coating powders - Part 12: Determination of compatibility
TS EN 13300 Paints and varnishes - For interior walls and ceilings - Water based coating and coating systems - Classification
TS 6293 EN ISO 3248 Paints and varnishes - Determination of heat effect
TS EN 1062-6 Paints and varnishes-Coating materials and coating systems for concrete and masonry surfaces-Part 6: Determination of carbon dioxide permeability
TS EN ISO 8130-13 (Formerly: TS ISO 8130-13) Coating powders-Part 13: Particle size analysis by laser diffraction
TS EN ISO 15710 Paints and varnishes - Corrosion test - Method of alternating dipping and removing into buffered sodium chloride solution
TS EN ISO 6504-3 (Formerly: TS ISO 6504-3) Paints and varnishes-Covering strength determination-Part 3: Determination of contrast ratio (opacity) of light color paints at constant application rate
TS EN 13300 Paints and varnishes - Waterborne coating materials and systems - for interior walls and ceilings - Classification
TS EN ISO 21227-1 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guide
TS 10285-1 EN ISO 4623-1 Paints and varnishes - Determination of corrosion resistance in the form of fibers - part 1: Steel base materials
TS EN 1062-7 Paints and varnishes - Coating materials and coating systems for concrete and masonry exterior surfaces - Part 7: Determination of cracking properties
TS EN ISO 6270-2 Paints and varnishes - Determination of moisture resistance - Part 2: Process for subjecting test specimens to condensation in aqueous media
TS EN ISO 2810 Paints and varnishes - Exposure and evaluation of coatings to natural weather conditions
TS EN ISO 6270-1 Paints and varnishes - Determination of moisture resistance - Part 1: Continuous condensation
TS EN ISO 2814 Paints and varnishes-Comparison of contrast ratio (covering power) of paints of the same type and color
TS EN ISO 4623-2 / AC Paints and varnishes - Determination of fiber corrosion resistance - Part 2: Aluminum base materials
TS EN ISO 6860 Paints and varnishes - Bending test (conical mandrel)
TS EN ISO 11998 Paints and varnishes - Determination of wet scrub resistance and cleanability of coatings
TS EN ISO 2808 Paints and varnishes-Film thickness determination
TS EN ISO 2812-1 Paints and varnishes - Determination of resistance to liquids section 1: General methods
TS EN ISO 2812-2 Paints and varnishes - Determination of resistance to liquids section 2: Water immersion method
TS EN 1062-3 Paints and varnishes - Coating materials and coating systems for external masonry and concrete structures - Part 3: Determination of liquid water permeability
TS EN ISO 3251 Paints, varnishes and plastics - Determination of non-volatile matter
TS EN ISO 15181-5 Dyes and varnishes - Determination of the release rate of biocides from antifouling paints - Part 5: Calculation of the release rate of tolylfluanite and diclofluanite in the extract by the determination of dimethyltolisulfamide (dmst) and dimethylphenylsulfamide (dmsa).
TS EN ISO 21227-4 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Assessment of filiform corrosion
TS EN ISO 6270-2 Paints and varnishes - Determination of moisture resistance - Part 2: Process of exposing test specimen parts to condensate
TS EN ISO 10890 Paints and varnishes - Mass-balance calculation Modeling of the release rate of biocides from antifouling dyes
TS EN ISO 3251 Paints, varnishes and plastics - Determination of non-volatile matter content
TS EN ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in other liquids other than water
TS ISO 8130-1 / T1 (Number Modification, TS EN ISO 8130-1) Coating powders - Part 1: Determination of particle size distribution by sieving
TS ISO 8130-2 / T1 (Number Modification, TS EN ISO 8130-2) Coating powders - Part 2: Density determination by gas comparison pycnometer (reference method)
TS ISO 8130-3 / T1 (Number Modification, TS EN ISO 8130-3) Coating powders - Part 3: Density determination by liquid displacement pycnometer
TS ISO 8130-4 / T1 (Number Modification, TS EN ISO 8130-4) Coating powders - Part 4: Calculation of lower explosion limit
TS ISO 8130-5 / T1 (Number Modification, TS EN ISO 8130-5) Coating powders - Part 5: Determination of the flow properties of the powder / air mixture
TS ISO 8130-6 / T1 (Number Modification, TS EN ISO 8130-6) Coating powders - Part 6: Determination of the gelation time of thermoset coating powders at a given temperature
TS ISO 8130-7 / T1 (Number Modification, TS EN ISO 8130-7) Coating powders - Part 7: Determination of mass loss by firing
TS ISO 8130-8 / T1 (Number Amendment, TS EN ISO 8130-8) Coating powders - Part 8: Evaluation of storage stability of thermoset powders
TS ISO 8130-10 / T1 (Number Modification, TS EN ISO 8130-10) Coating powders - Part 10: Determination of deposition efficiency
TS ISO 8130-11 / T1 (Number Modification, TS EN ISO 8130-11) Coating powders - Part 11: Curved surface flow test
TS ISO 8130-12 / T1 (Number Modification, TS EN ISO 8130-12) Coating powders - Part 12: Determination of compatibility
TS ISO 8130-13 / T1 (Number Modification, TS EN ISO 8130-13) Coating powders - Part 13: Particle size analysis by laser diffraction
TS EN ISO 2812-2 Paints and varnishes - Determination of resistance to liquids section 2: Water immersion method
TS EN ISO 1519 Paints and varnishes - Bending test (cylindrical mandrel)
TS EN ISO 15234 Paints and varnishes - Tests of formaldehyde absorbed coatings and melamine foams - Determination of the stability of formaldehyde concentration in a small test section
TS EN ISO 2811-2 Paints and varnishes - Determination of density - Part 2: Submersible method
TS EN ISO 2811-4 Paints and varnishes - Determination of density - Part 4: Pressure vessel method
TS EN ISO 2811-3 Paints and varnishes - Determination of density - Part 3: Release method
TS EN ISO 1518-1 Paints and varnishes-Scratch resistance test-Part 1: Constant loading test
TS EN 16074 Paints and varnishes - Determination of the splash rate and the solubility of the roll coating materials
TS EN ISO 6272-1 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 1: Weight reduction test, large area track remover
TS EN ISO 6272-2 Paints and varnishes - Rapid deformation (impact resistance) tests - part 2: Falling weight test, small area notching
TS EN ISO 4628-6 Paints and varnishes - Evaluation of the degradation of paint coatings - Density, quantity and size of defects of the general type - Part 6: Evaluation of chalking degree by adhesive tape method
TS EN 16105 Paints and varnishes - Laboratory method for the determination of substances from intermittent contact coatings with water
TS EN ISO 1518-2 Paints and varnishes - Determination of resistance to deformation - Part 2: Variable load method
TS EN ISO 12137Paints and varnishes - Determination of resistance to deformation
TS EN ISO 2431 Paints and varnishes - Determination of flow time using flow containers
TS EN ISO 7783 Paints and varnishes - Determination of water vapor transmission rate - Cup method
TS EN ISO 15184 Paints and varnishes - Determination of film hardness - Pencil test
EN 927-3 Paints and varnishes-Coating materials and coating systems for outdoor wood materials-Part 3: Exposure test to natural weather conditions
TS EN 927-3 Paints and varnishes-Coating materials and coating systems for outdoor wood materials-Part 3: Exposure test to natural weather conditions
TS EN ISO 2812-3 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an adsorbent medium
TS EN ISO 13129 Paints and varnishes - Electrochemical measurement of protection for steels with paint coatings - Intermittent current (CI) technique, attenuated voltage measurement technique and DC transient direct current (DCT) measurements
TS EN ISO 4628-8 Paints and varnishes - Evaluation of degradation of coatings - Demonstration of the size and quantity of defects and the intensity of trkregular changes in appearance - Part 8: Evaluation of the degree of separation and corrosion of layers around a scratch
TS EN ISO 9117-6 Paints and varnishes - Drying tests - Determination of print resistance
TS EN ISO 13076 Paints and varnishes - Lighting and processes - For visual inspection of coatings
TS EN ISO 20566 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory carwash tool
TS EN 927-1 Paints and varnishes - Coatings and coating systems for externally used wood materials - Section 1: Classification and selection
TS EN ISO 20567-3 Paints and varnishes - Determination of stone-notch resistance of coatings - Single impact test - Using free fall impact body
TS EN ISO 2409 Paints and varnishes - Cross-cutting test
TS EN ISO 9117-4 Paints and varnishes-Drying tests- Part 4: Test using mechanical recorder
TS EN ISO 9117-5 Paints and varnishes-Drying tests- Part 5: Adapted Bandow-Wolff test
TS EN ISO 1524 Paints, varnishes and printing inks - Determination of fineness
TS 4969 Paints - Viscosity determination (with Brookfield viscometer)
TS EN ISO 15110Paints and Varnishes - Artificial weather - Including acidic deposition
TS EN ISO 11890-2 Paints and varnishes-Volatile organic matter content (VOC) determination-Part 2: Gas chromatography method
TS EN ISO 3233-1 Paints and varnishes - Determination of the percentage volume of non-volatile material - Part 1: Method for the determination of non-volatile material using a coated test panel and the determination of dry film density by the Archimedes principle
TS EN ISO 15091 Paints and varnishes - determination of electrical conductivity and resistance
TS EN ISO 9038: Determination of flammability
TS EN ISO 11997-2 Paints and varnishes - Determination of resistance to repeated corrosion conditions - Part 2: Wet (salt fog) / dry / moist / uv radiation
TS EN ISO 16474-1 Paints and varnishes - Method of exposure to light sources in the laboratory - Part 1: General guide
TS EN ISO 16474-2 Paints and varnishes - Exposure method to laboratory light source - Part 2: Xenon-arc lamp
TS EN ISO 16474-3 Paints and varnishes - Exposure method to laboratory light source - Part 3: Fluorescent UV lamp
TS EN ISO 15711 Paints and varnishes - Determination of the resistance of the seawater exposed coatings to cathodic separation
TS EN 16402 Paints and varnishes - Evaluation of material release from coatings exposed to indoor air - Sampling, conditioning and testing
TS EN ISO 15528 Paints, varnishes and related raw materials - Sampling
TS EN 1062-11 Paints and varnishes - Coating materials and coating systems of concrete and masonry surfaces - Part 11: Pre-test conditioning methods
TS EN ISO 16925 Paints and varnishes - Determination of coating resistance - Against pressurized water jet
TS EN ISO 16927 Paints and varnishes - Determination of coating recoatability and coating ability
S EN ISO 15181-6 Paints and varnishes - Determination of release of biocides from antifouling paints - Part 6: Determination of tralopyryl release rate from the amount of degradation products in the extract
TS EN 15457 Paints and varnishes - Laboratory method for testing the effectiveness of film protectors against fungi in a coating
TS EN ISO 17463 Paints and varnishes - Guide for the determination of corrosion inhibiting properties of organic coatings by accelerated-cycle electrochemical technique
TS EN 927-2 Paints and varnishes - Coating materials and coating systems for outdoor wood materials - Part 2: Performance specifications
TS EN ISO 4618 Paints and varnishes - Terms and recipes
TS EN ISO 13803 Paints and varnishes - Determination of reflectance haze at 20 ° on paint films
TS EN ISO 2813 Paints and varnishes - Determination of non-metallic paint films at 20, 60 and 85 angles
TS EN 15458 Paints and varnishes - Laboratory method for testing the efficacy of film protectants against algae in a coating
TS EN 15458 Active substances, algae, biocides, coating materials, recipes, efficacy, evaluation, film protectors, films, instruments, laboratory tests, microorganisms, dyes, preservation, preservatives, samples, test reports, test
EN 15457: 2014 Paints and varnishes - Laboratory method for testing the efficacy of film protectors against fungi in a coating
TS EN ISO 1524 Paints, varnishes and printing inks - Determination of fineness
TS EN ISO 11997-2 Paints and varnishes - Determination of resistance to repeated corrosion conditions - Part 2: Wet (salt fog) / dry / moist / uv radiation
TS EN ISO 3233-1 Paints and varnishes - Determination of the percentage by volume of non-volatile material - Part 1: Method for determination of non-volatile material using a coated test panel and determination of dry film density by Archimedes principle
TS EN ISO 15528Paints, varnishes and related raw materials - Sampling
TS EN ISO 7783 Paints and varnishes - Determination of water vapor transmission properties - Cup method
TS EN ISO 2808 Paints and varnishes - Film thickness determination (ISO 2808: 2007)
TS EN 16623 Paints and varnishes - Reactive coatings for fire protection of metallic base materials - Definitions, requirements, specifications and marking
TS EN ISO 3679 Determination of flash and non-flash point - Fast equilibrium closed cup method
TS EN ISO 3233-3 Paints and varnishes - Determination of percentage non-volatile substance-3. Part volume: Determination by calculation from non-volatilematter content determined by ISO 3251, the density of the coating material and the density of the solvent as the coating material
tst EN ISO 4618Paints and varnishes - Terms and recipes
tst EN ISO 1513Paints and varnishes - Preparation of test and test specimens
tst EN ISO 2813 Paints and varnishes - Determination of non-metallic paint films at 20, 60 and 85 angles
tst EN ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Picnometer method
tst EN 15457 Paints and varnishes - Laboratory method for testing the efficacy of film protectors against fungi in a coating
tst EN ISO 9117-1 Paints and varnishes - Drying tests - Determination of complete drying condition and complete drying time
tst EN ISO 2431Paint and varnishes - Determination of flow time using flow containers
tst EN ISO 9117-6 Paints and varnishes - Drying tests - Determination of print resistance
TS EN ISO 2409 Paints and varnishes - Cross-cutting test
tst EN ISO 1519 Paints and varnishes - Bending test (cylindrical mandrel)
tst EN ISO 8501-1 Preparation of steel substrates - Before the application of paint and related materials - Visual inspection of surface cleanliness - Part 1: Rust grades and degree of preparation of uncoated steel substrate surfaces and steel substrate surfaces after complete removal of previous coating
S EN ISO 4628-1 Paints and varnishes - Assessment of deterioration in paint coatings - Brief indication of the magnitude and quantity of defects and the severity of uniform changes in appearance - Part 1: General principles and brief representation system
TS EN ISO 4628-2 Paints and varnishes - Assessment of deterioration in paint coatings - Brief indication of the magnitude of defects and the severity of uniform changes in appearance - Part 2: Evaluation of the degree of bubbling
TS EN ISO 4628-4 Paints and varnishes - Assessment of deterioration of paint coatings - Brief description of the magnitude and quantity of defects and the severity of uniform changes in appearance - Part 4: Evaluation of the degree of cracking
TS EN ISO 4628-5 Paints and varnishes - Assessment of deterioration in paint coatings - Brief indication of the size and quantity of defects and the severity of uniform changes in appearance - Part 5: Evaluation of the degree of flaking
TS EN ISO 4628-7 Paints and varnishes - Evaluation of degradation in coating - Evaluation of size and quantity of defects and density of uniform changes in appearance - Determination of degree of chalking with velvet method
TS EN ISO 4628-10 Paints and varnishes -Evaluation of deterioration in coating -Evaluation of size and quantity of defects and the intensity of uniform change in appearance -Faculty of filament corrosion
TS EN ISO 4628-3 Paints and varnishes - Evaluation of deterioration of paint coatings - Brief indication of the magnitude and quantity of defects and the severity of uniform changes in appearance - Part 3: Evaluation of the degree of corrosion
TS EN ISO 3233-2 Paints and varnishes - Determination of the percentage by volume of non-volatile material - Part 2: Method of determination of non-volatile material content in accordance with ISO 3251 and determination of dry film density on test sheets by Archimedes principle
TS EN 16492 Paints and Varnishes - Measurement of surface degradation caused by fungus and algae on coatings
TS EN ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Picnometer method
TS EN ISO 4624 Paints and varnishes - Tensile test for adhesion
TS EN ISO 7784-1 Paints and varnishes - Determination of abrasion resistance - Part 1: Abrasive paper coated wheel and rotary test specimen method
TS EN ISO 7784-2 Paints and varnishes - Determination of abrasion resistance - Abrasive rubber and rotary test specimen method (ISO 7784-2: 2016)
TS EN ISO 7784-3 Paints and varnishes - Determination of abrasion resistance - Part 3: Abrasive paper coated wheel and linear alternating test method (ISO 7784-3: 2016)
TS EN ISO 16482-1 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 1: Oven method
TS EN ISO 16482-2 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 2: Microwave method
Electrochemical impedance spectroscopy (EIS) of coated and uncoated metallic samples - Part 16773: Terms and definitions
Electrochemical impedance spectroscopy (EIS) in coated and uncoated metallic samples - Part 16773: Data collection TS EN ISO 2-2
Electrochemical impedance spectroscopy (EIS) of coated and uncoated metallic samples - Part 16773: Processing and analysis of data from model cells TS EN ISO 3-3
TS EN ISO 20567-2 Paints and varnishes - Determination of flaking resistance of coatings - Part 2: Single impact test with guided impact body
TS EN ISO 20567-1: 2017 Paints and varnishes - Determination of flaking resistance of coatings - Part 1: Multiple impact tests
TS EN 927-5 Paints and varnishes-Coating materials and coating systems for outdoor wood materials-Part 5: Evaluation of water permeability
TS EN 927-6 Paints and varnishes - Coating materials and coating systems for wood façades - Part 6: Artificial weathering of wood veneers using artificial fluorescent uv lamps and water
TS EN 1062-1 Paints and varnishes - Coating materials and systems for masonry and concrete façades - Part 1: Classification
TS EN 1062-3 Paints and varnishes - Coating materials and coating systems for masonry and concrete façades - Part 3: Determination of water permeability
TS EN 1062-11 / AC Paints and varnishes - Coating materials and coating systems for concrete and masonry exterior surfaces - Part 11: Pretreatment methods
TS EN 1062-6 Paints and varnishes - Coating materials and coating systems for masonry and concrete façades - Part 6: Determination of carbon dioxide permeability
TS EN 1062-7 Paints and varnishes - Coating materials and coating systems for masonry and concrete façades - Part 7: Determination of crack coverage
TS EN 1062-11 Paints and varnishes-Coating materials and coating systems for concrete and masonry surfaces - Part 11: Pre-test conditioning methods
TS 1171 Flash point determination - Tag with closed cup device
TS EN ISO 1513 Paints and varnishes - Preparation of test and test specimens
TS EN ISO 1520 Paints and varnishes - Immersion test
TS 1753 EN ISO 1516 Determination of flash point - Closed cup balance method
TS 1754 EN ISO 1523 Flash point determination - Closed cup balance method
TS EN ISO 2810 Paints and varnishes - Exposure and evaluation of coatings to natural weather conditions
TS EN ISO 2812-4 Paints and varnishes - Determination of resistance to liquids - Part 4: Speckle method
TS EN ISO 2812-5 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature increasing oven method
TS EN ISO 2884-1 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Conical and plate viscometer operated at high shear rate
TS EN ISO 2884-2 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
TS 4320 EN ISO 1514 Paints and varnishes - Standard panels for tests
TS EN ISO 4617 Paints and varnishes - List of equivalent terms
TS EN ISO 4623-2 Paints and varnishes - Determination of fiber corrosion resistance - Part 2: Aluminum base materials
tst EN 4628-6 Paints and varnishes - Evaluation of the degradation of paint coatings - Indication of density, quantity and size of general type defects - Part 6: Evaluation of chalking degree by adhesive tape method
TS 6037 EN ISO 2815 Paints and varnishes - Buchholz sinking test
TS EN ISO 6270-1 Paints and varnishes - Determination of moisture resistance - Part 1: Continuous condensation
tst EN ISO 6272-1 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 1: Weight reduction test, large area trace forming
tst EN ISO 6272-1 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 1: Weight reduction test, large area trace forming
TS EN ISO 6504-1 Paints and varnishes-Determination of covering strength-Part 1: Kubelka-Munk method for white and light colored paints
TS ISO 6504-3 / T2 (Number modification: TS EN ISO 6504-3) Paints and varnishes-Covering strength determination-Part 3: Determination of contrast ratio (opacity) of light color paints at constant application rate
TS ISO 6504-3 / T1 Paints and varnishes-Determination of covering strength-Part 3: Determination of the contrast ratio (opacity) of light color paints at a fixed application rate
TS 6610 EN ISO 3231 Paints and varnishes - Resistance to moisture atmospheres containing sulfur dioxide
TS 6611 EN ISO 3668 Paints and varnishes - Visual comparison of the colors of paints
TS ISO 8005 Carbonaceous materials used in aluminum production - Raw and calcined coke - Determination of ash
TS EN ISO 8130-9 Coating powders - Sampling
TS EN ISO 8130-14 Coating powders - Part 14: Terms and definitions
TS 8314 EN ISO 3678 Paints and varnishes
TS EN ISO 9117-1 Paints and varnishes - Drying tests - Determination of complete drying condition and complete drying time
TS EN ISO 9117-2 Paints and varnishes-Drying tests-Part 2: Pressure test for stacking resistance
TS EN ISO 9117-3 Paints and varnishes-Drying tests- Part 3: Surface drying test using ball method
TS EN ISO 9514 Paints and varnishes-Determination of pot life of liquid systems-Guide for preparation and conditioning of samples and experiments
TS EN ISO 11890-1 Paints and varnishes - Determination of the content of volatile organic compounds (voc) - Part 1: Difference method
TS EN ISO 11997-1 Paints and varnishes - Determination of resistance to repeated corrosion conditions - Part 1: Wet (salt fog) / dry / damp
TS EN ISO 11998 Paints and varnishes - Determination of wet scrub resistance and cleanability of coatings
TS EN 12206-1 Paints and varnishes - Aluminum and aluminum alloy coating for architectural purposes - Part 1: Coatings prepared from coating powder
TS EN 13300 / AC Paints and varnishes - Waterborne coating materials and systems - For interior walls and ceilings - Classification
TS 13415 Paints - Water based - Acrylic - Asphalt coating paint
TS EN 15060 Paints and varnishes - Guidelines for the classification and selection of coating systems for wood-based materials in furniture used in buildings
TS EN ISO 15181-3 Dyes and varnishes - Determination of the release rate of biocides from antifouling dyes - Part 3: Calculation of zinc ethylene-Bis (dithiocarbamate) (zineb) release rate by determination of ethylenethioure concentration in extract
TS EN ISO 15181-4 Dyes and varnishes - Determination of the release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenyl borane (ptb) concentration in extract and calculation of release rate
TS EN ISO 15181-1 Dyes and varnishes - Determination of the rate of release of biocides from antifouling dyes - Part 1: General method for extraction of biocides
TS EN ISO 15181-2 Dyes and varnishes - Determination of the release rate of biocides from antifouling dyes - Part 2: Determination of the copper ion concentration in the extract and calculation of its release rate
TS ISO 15710 / T1 (Number modification: TS EN ISO 15710) Paints and varnishes - Corrosion test - Alternating immersion and removal of buffered sodium chloride solution
tst EN 16105 Paints and varnishes - Laboratory method for the determination of substances from intermittent contact with water
TS EN ISO 16276-1 Corrosion protection of steel structures with protective paint systems - Evaluation and acceptance criteria for the adhesion (crack resistance) of a coating - Part 1: Tensile test
TS EN ISO 16276-2 Corrosion protection of steel structures with protective coating systems - Evaluation and acceptance criteria for the adhesion of a coating (crack resistance) - Part 2: Cross-cut test and x-cut test
TS EN ISO 16773-4 Paints and varnishes TS EN ISO 16862 Paints and varnishes - Determination of bending resistance
TS EN ISO 17132 Paints and varnishes-T-Bending test
TS EN ISO 17872 Paints and varnishes - Guide to the disclosure of scratch marks in coatings on metallic panels for corrosion tests
TS EN ISO 17895 Paints and varnishes - Determination of volatile organic compound content in low volatile organic compound content emulsion paints (volatile organic compound in cans) - Electrochemical impedance spectroscopy of coated samples - Part 4: Spectrum samples of polymer coated samples
TS EN ISO 21227-2 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging
TS EN ISO 21227-3 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of corrosion and folding around a scratch
TS EN ISO 28199-1 / AC Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 1: Related terms and descriptions and preparation of test panels
TS EN ISO 28199-2 Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 2: Color stability, covering power process, redissolution, over-spray absorption, wetting, surface texture and spotting
TS EN ISO 28199-3 Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 3: Visual assessment of bagging, bubble formation, pinhole and covering strength
TS EN ISO 28199-1 Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 1: Related terms and descriptions and preparation of test panels
tst EN ISO 6272-2Paints and varnishes - Rapid deformation (impact resistance) tests - Part 2: Weight reduction test, small area track marker