In the paint industry, the components used in the production of paints must be controlled. We provide testing, inspection and certification services for all Paint Components standards below.
TS 2326 EN ISO 787-9 General test methods for pigments and fillers part 9: Determination of the ph value of the aqueous suspension
TS 2580 EN ISO 787-2 General test methods for pigments and fillers-Part 2: Determination of volatile matter at 105 ° c
TS EN ISO 787-24 General test methods for pigments and fillers - Part 24: Photometric methods for the determination of the relative shade strength of colored pigments and the relative scattering power of white pigments
TS EN ISO 8780-3 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 3: Dispersion using a high-speed impeller grinder
TS EN ISO 8780-3 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 3: Dispersion using a high-speed impeller grinder
TS EN ISO 8780-5 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 5: Dispersion using an automatic material
TS EN ISO 8780-5 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 5: Dispersion using an automatic material
TS EN ISO 8781-2 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 2: Evaluation from change in grinding fineness
TS EN ISO 3262-2 Fillers for paints - Properties and test methods - Part 2: Barite (natural barium sulfate)
TS 2617 EN ISO 787-18 General test methods for pigments and fillers - Part 18: Determination of sieve residue - Mechanical washing method
TS 4327 EN ISO 787-23 General test methods for pigments and fillers - Part 23: Density determination (using centrifuge to remove trapped air)
TS EN ISO 3262-1 Fillers for paints - Properties and test methods - Part 1: Introduction and general test methods
TS EN ISO 3262-8 Fillers for paints - Properties and test methods - Part 8: Natural clay
TS EN ISO 3262-21 Fillers for paints - Specification and test methods - Part 21: Silica sand (unground natural quartz)
TS 2366 EN ISO 2114 Plastics (polyester resins) - Paints and varnishes (binders) - Determination of partial acid value and total acid value
TS 9473 EN ISO 14446 Binders for paints and varnishes - Determination of viscosity of industrial cellulose nitrate solutions
TS 5402 EN ISO 2495 Iron blue pigments (cyanoferrate-based blue pigments) -Features and test methods
TS 772 White pigments for paints
TS EN ISO 11668 Binders for paints and varnishes - Chlorinated polymerization resins - General test methods
TS EN ISO 591-1 Titanium dioxide pigments for paints - part 1: Properties and test methods
TS EN ISO 591-1 Titanium dioxide pigments for paints - Part 1: Properties and test methods
TS EN ISO 1248Iron oxide pigments - Specification and test methods
TS EN ISO 3251 Paints, varnishes and plastics - Determination of non-volatile matter
TS EN ISO 1248 / AC Iron oxide pigments - Specification and test methods
TS EN ISO 787-7 Test methods for pigments and fillers-Part 7: Determination of residue on sieve-Normal washing method
TS EN ISO 3251 Paints, varnishes and plastics - Determination of non-volatile matter content
TS 9473 ISO 14446 / T1 (Number Modification, TS 9473 EN ISO 14446) Binders for paints and varnishes - Determination of viscosity of industrial cellulose nitrate solutions and classification of such solutions
TS EN ISO 4619Dryers for paints and varnishes
TS EN ISO 19334 Binders for paints and varnishes - Resin gum - Gas chromatographic analysis
TS ISO 787-17 Test methods for pigments-Part 17: Comparison of the color strength of white pigments
TS EN ISO 13632 Binders - for paints and varnishes - Resin - Sample preparation and sampling for color measurement
TS EN 12878 Pigments for the coloring of cement and / or lime based construction materials - Properties and test methods
TS ISO 10601 Micaceous iron oxide pigments for paints - Properties and test methods
tst ISO 10601 Micaceous iron oxide pigments for paints - Specifications and test methods
tst EN ISO 787-7 Test methods for pigments and fillers-Part 7: Determination of residue on sieve-Normal washing method
TS EN ISO 8623 Liquid resin fatty acids for paints and varnishes - Properties and test methods
TS EN ISO 4630 Clear liquids - Color determination by Gardner color scale
TS EN ISO 6271 Clear liquids - Color determination with platinum-cobalt scale
TS EN ISO 16482-1 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 1: Oven method
TS EN ISO 16482-2 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 2: Microwave method
TS EN ISO 4629-1 Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without catalyst
TS EN ISO 4629-2 Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using catalyst
TS EN ISO 150 Paints and varnishes - Crude, refined and boiled flaxseed oil - Properties and test methods
TS EN ISO 276: 2010 Binders for paints and varnishes-Stand oil linseed linseed oil-Properties and test methods
TS EN ISO 277: 2010 Binders for paints and varnishes-Raw china oil-Specifications and test methods
TS ISO 473 Lithopon pigments for paints - Properties and test methods
TS ISO 510 Red lead used in paints
TS EN ISO 787-25 General test methods for pigments and fillers - Part 25: Color comparison of white, black and colored pigments in full shade systems
S 2325 EN ISO 787-8 General test methods for pigments and fillers - Part 8: Determination of water soluble substances - Cold extraction method
TS 2327 EN ISO 787-10 General test methods for pigments and fillers-Part 10: Density determination pycnometer method
TS 2328 EN ISO 787-11 General test methods for pigments and fillers - Part 11: Determination of the compressed volume and apparent density after compaction
TS 2612 EN ISO 787-13 General test methods for pigments-Part 13: Determination of water-soluble sulfate, chloride and nitrates
TS 2613 EN ISO 787-14 General test methods for pigments-Part 14: Determination of the intrinsic resistance of the aqueous extract
TS 2614 EN ISO 787-15 General test methods for pigments and fillers section 15- Comparison of light fastness of similar pigments
TS 2614 EN ISO 787-15 / T1 General test methods for pigments and fillers section 15- Comparison of light fastness of similar pigments
TS 2615 EN ISO 787-16 General test methods for pigments and fillers-Section 16: Determination of relative tint changing powers (or equivalent coloring values) and color-opening powers of colored pigment
TS 2618 EN ISO 787-19 General test methods for pigments - Part 19: Determination of water soluble nitrates (salicylic acid method)
TS EN ISO 3262-3 Fillers for paints - Properties and test methods - Part 3: Precipitated barium sulfate (blanc fixe)
TS EN ISO 3262-4 Fillers for paints - Specification and test methods - Part 4: Microcrystalline calcium carbonate (whiting)
TS EN ISO 3262-5 Fillers for paints - Properties and test methods - Part 5: Natural crystalline calcium carbonate
TS EN ISO 3262-6 Fillers for paints - Properties and methods - Part 6: Precipitated calcium carbonate
TS EN ISO 3262-7 Fillers for paints - Properties and test methods - Part 7: Dolomite
TS EN ISO 3262-9 Fillers for paints - Properties and test methods - Part 9: Calcined clay
TS EN ISO 3262-10 Fillers for paints - Specification and test methods - Part 10: Natural talc / chlorite with pulsed structure
TS EN ISO 3262-11 Fillers for paints - Properties and test methods - Part 11: Carbonate-containing pulsed natural talc
TS EN ISO 3262-12 Fillers for paints - Specification and test methods - Part 12: Muscovite mica
TS EN ISO 3262-13 Fillers for paints - Specification and test methods - Part 13: Natural masonry (ground)
TS EN ISO 3262-14 Fillers for paints - Properties and test methods - Part 14: Crystallite
TS EN ISO 3262-15 Fillers for paints - Properties and test methods - Part 15: Glassy silica
TS EN ISO 3262-16 Fillers for paints - Specification and test methods - Part 16: Aluminum hydroxide
TS EN ISO 3262-17 Fillers for paints - Properties and test methods - Part 17: Precipitated calcium silicate
TS EN ISO 3262-18 Fillers for paints - Properties and test methods - Part 18: Precipitated sodium aluminum silicate
TS EN ISO 3262-19 Fillers for paints - Specification and test methods - Part 19: Precipitated silica
TS EN ISO 3262-20 Fillers for paints - Specification and test methods - Part 20: Fume silica
TS EN ISO 3262-22 Fillers for paints - Properties and test methods - Part 22: Melted calcined diatomite (kieselguhr)
TS EN ISO 4625-1 Binders for paints and varnishes - Determination of softening point - Part 1: Ring and ball method
TS EN ISO 4625-2 Binders for paints and varnishes - Determination of softening point - Part 2: Cup and ball method
TS EN ISO 6744-1 Binders for paints and varnishes - Alkyd resins - Part 1: General test methods
TS EN ISO 6744-2 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content
TS EN ISO 6744-3 Binders for paints and varnishes - Alkyd resins - Part 3: Determination of non-saponifying substance content
TS EN ISO 6744-4 Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content
TS EN ISO 7142 Binders for paints and varnishes - Epoxy resins - General test methods
TS EN ISO 7143 Paints, varnishes and binders - Test methods for the characterization of waterborne coatings and binders
TS 7517 ISO 3711 Lead chromate pigments and lead chromate-Molybdate pigments-Features and test methods
TS EN ISO 7579 Colorants-Determination of solubility in organic solvents-Gravimetric and photometric method
TS EN ISO 8780-1 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 1: Introduction
TS EN ISO 8780-1 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 1: Introduction
TS EN ISO 8780-2 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 2: Dispersion using an oscillating agitator
TS EN ISO 8780-2 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 2: Dispersion using an oscillating agitator
TS EN ISO 8780-4 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 4: Dispersion using a bead mill
TS EN ISO 8780-4 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 4: Dispersion using a bead mill
TS EN ISO 8780-6 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 6: Dispersion using a three-roll grinder
TS EN ISO 8780-6 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 6: Dispersion using a three-roll grinder
TS EN ISO 8781-1 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 1: Evaluation of changes in relative pigmentation strength of colored pigments
TS EN ISO 8781-1 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 1: Evaluation of changes in relative pigmentation strength of colored pigments
TS EN ISO 8781-3 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 3: Evaluation from changes in brightness
TS EN ISO 8781-3 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 3: Evaluation from changes in brightness
TS EN ISO 10283 Binders for paints and varnishes - Determination of monomer diisocyanates in polyisocyanate resins
TS 10622 EN ISO 3549 Pigments - Zinc powder - Used in paints - Properties and test methods
TS EN ISO 11908Binders for paints and varnishes-Amino resins-General test methods
TS EN ISO 11909 binders for paints and varnishes-Polyisocyanate resins-General test methods
TS EN 12878 Pigments used in the coloring of cement and / or lime based building materials - Properties and test methods
TS EN ISO 14680-3 (Formerly: TS ISO 14680-3) Paints and varnishes-Determination of pigment content-Part 3: Filtration method
TS EN ISO 14680-1 (Formerly: TS ISO 14680-1) Paints and varnishes-Determination of pigment content-Part 1: Centrifuge method
TS EN ISO 14680-2 (Formerly: TS ISO 14680-2) Paints and varnishes-Determination of pigment content-Part 2: Ash method
TS ISO 14680-1 / tst T1 Paints and varnishes-Determination of pigment content-Part 1: Centrifuge method
TS ISO 14680-2 / tst T1 Paints and varnishes-Determination of pigment content-Part 2: Ash method
TS ISO 14680-3 / tst T1 Paints and varnishes-Determination of pigment content-Part 3: Filtration method
TS ISO 14680-1 / T1 (Number modification: TS EN ISO 14680-1) Paints and varnishes-Determination of pigment content-Part 1: Centrifuge method
TS ISO 14680-2 / T1 (Number modification: TS EN ISO 14680-2) Paints and varnishes-Determination of pigment content-Part 2: Ash method
TS ISO 14680-3 / T1 (Number modification: TS EN ISO 14680-3) Paints and varnishes-Determination of pigment content-Part 3: Filtration method
TS EN ISO 15715 Binders for paints and varnishes - Determination of turbidity
TS EN ISO 15880Paints, varnishes and binders - Determination of the number of shaft equivalent of water-based coating materials and binders
TS EN ISO 16805 Binders for paints and varnishes - Determination of the glass transition temperature