The standards required for the process from production to sales within the scope of Paint Industry are as follows. We provide testing, auditing and certification services for all of the following standards.
TS EN 50059 Properties of electrostatic hand spray equipment used in non-flammable material during painting and surface treatment
TS 2580 EN ISO 787-2 General test methods for pigments and fillers-Part 2: Determination of volatile matter at 105 ° c
TS EN ISO 787-24 General test methods for pigments and fillers - Part 24: Photometric methods for the determination of the relative shade strength of colored pigments and the relative scattering power of white pigments
TS EN ISO 8780-3 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 3: Dispersion using a high-speed impeller grinder
TS EN ISO 8780-3 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 3: Dispersion using a high-speed impeller grinder
TS EN ISO 8780-5 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 5: Dispersion using an automatic material
TS EN ISO 8780-5 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 5: Dispersion using an automatic material
TS EN ISO 8781-2 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 2: Evaluation from change in grinding fineness
TS EN ISO 12944-3 Paints and varnishes - Steels - Corrosion protection of steel structures by protective paint systems - Part 3: Design
TS EN ISO 12944-8 Paints and varnishes - Steels - Corrosion protection of steel structures by protective paint systems - Part 8: Development of features for new operation and maintenance
TS EN ISO 3262-2 Fillers for paints - Properties and test methods - Part 2: Barite (natural barium sulfate)
TS 2617 EN ISO 787-18 General test methods for pigments and fillers - Part 18: Determination of sieve residue - Mechanical washing method
TS 4327 EN ISO 787-23 General test methods for pigments and fillers - Part 23: Density determination (using centrifuge to remove trapped air)
TS EN ISO 4617 Paints and varnishes - List of equivalent terms
TS EN ISO 3262-1 Fillers for paints - Properties and test methods - Part 1: Introduction and general test methods
TS EN ISO 8130-1 (Formerly: TS ISO 8130-1) Coating powders - Part 1: Determination of particle size distribution by sieving
TS EN ISO 8130-2 Coating powders - Part 2: Determination of density by gas comparison pycnometer (reference method)
Coating powders - Part 8130: Density determination by liquid displacement pycnometer TS EN ISO 3-8130 (Former no: TS ISO 3-3)
TS EN ISO 8130-4 (Formerly: TS ISO 8130-4) Coating powders - Part 4: Calculation of the lower explosion limit
TS EN ISO 8130-5 (Formerly: TS ISO 8130-5) Coating powders - Part 5: Determination of the flow properties of the powder / air mixture
TS EN ISO 8130-6 (Formerly: TS ISO 8136-6) Coating powders - Part 6: Determination of the gelling time of thermoset coating powders at a given temperature
TS EN ISO 8130-7 (Formerly: TS ISO 8130-7) Coating powders - Part 7: Determination of mass loss by firing
TS EN ISO 8130-8 (Formerly: TS ISO 8130-8) Coating powders - Part 8: Evaluation of storage stability of thermoset powders
TS EN ISO 8130-10 (Formerly: TS ISO 8130-10) Coating powders - Part 10: Determination of deposition efficiency
TS EN ISO 8130-11 Coating powders - Part 11: Curved surface flow test
TS EN ISO 8130-12 (Formerly: TS ISO 8130-12) Coating powders - Part 12: Determination of compatibility
TS EN ISO 3262-8 Fillers for paints - Properties and test methods - Part 8: Natural clay
TS EN ISO 3262-21 Fillers for paints - Specification and test methods - Part 21: Silica sand (unground natural quartz)
TS EN ISO 12944-3 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design criteria
TS EN ISO 12944-8 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 8: Specification for new application and maintenance
TS 2366 EN ISO 2114 Plastics (polyester resins) - Paints and varnishes (binders) - Determination of partial acid value and total acid value
TS EN 13300 Paints and varnishes - For interior walls and ceilings - Water based coating materials and coating systems - Classification 87.040
TS 9473 EN ISO 14446 Binders for paints and varnishes - Determination of viscosity of industrial cellulose nitrate solutions and classification of such solutions
TS ISO 11798 Information and documentation - Permanence and durability of paper texts, prints and copies - Specifications and test methods
TS 6293 EN ISO 3248 Paints and varnishes - Determination of heat effect
TS EN 1062-6 Paints and varnishes-Coating materials and coating systems for concrete and masonry surfaces-Part 6: Determination of carbon dioxide permeability
TS ISO 12634 Graphic technology-Determination of adhesion of pasty inks and thinners with rotary adhesion meter
TS 5402 EN ISO 2495 Iron blue pigments (cyanoferrate-based blue pigments) -Features and test methods
TS EN ISO 8130-13 (Formerly: TS ISO 8130-13) Coating powders-Part 13: Particle size analysis by laser diffraction
TS EN ISO 15710Paints and varnishes - Corrosion test - Alternating immersion and extraction of buffered sodium chloride solution
TS EN ISO 6504-3 (Formerly: TS ISO 6504-3) Paints and varnishes-Covering strength determination-Part 3: Determination of contrast ratio (opacity) of light color paints at constant application rate
TS 8972 ISO 2834 Graphic technology-Preparation of test prints for offset and letterpress inks
TS 772White pigments for paints
TS EN ISO 11668Binders for paints and varnishes - Chlorinated polymerization resins - General test methods
TS 8973 ISO 2836 Graphic technology - Printing and printing inks - Evaluation of resistance to various reagents
TS EN 13300 Paints and varnishes - Waterborne coating materials and systems - for interior walls and ceilings - Classification
TS EN ISO 591-1 Titanium dioxide pigments for paints - part 1: Properties and test methods
TS EN ISO 21227-1 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guide
TS 10285-1 EN ISO 4623-1 Paints and varnishes - Determination of fiber corrosion resistance - Part 1: Steel base materials
TS EN 1062-7 Paints and varnishes - Coating materials and coating systems for concrete and masonry exterior surfaces - Part 7: Determination of cracking properties
TS EN ISO 6270-2 Paints and varnishes - Determination of moisture resistance - Part 2: Process for subjecting test specimens to condensation in aqueous media
TS EN ISO 591-1 Titanium dioxide pigments for paints - Part 1: Properties and test methods
TS EN ISO 2810 Paints and varnishes - Exposure and evaluation of coatings to natural weather conditions
TS EN ISO 6270-1 Paints and varnishes - Determination of moisture resistance - Part 1: Continuous condensation
TS EN ISO 2814Paints and varnishes-Comparison of contrast ratio (covering power) of paints of the same type and color
TS EN ISO 4623-2 / AC Paints and varnishes - Determination of fiber corrosion resistance - Part 2: Aluminum base materials
TS EN ISO 6860 Paints and varnishes - Bending test (conical mandrel)
TS EN ISO 11998 Paints and varnishes - Determination of wet scrub resistance and cleanability of coatings
TS EN ISO 2808Paints and varnishes - Determination of film thickness
TS EN ISO 2812-1 Paints and varnishes - Determination of resistance to liquids section 1: General methods
TS EN ISO 2812-2 Paints and varnishes - Determination of resistance to liquids section 2: Water immersion method
TS EN ISO 12944-5Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 5: Protective paint systems
TS EN 1062-3Paints and varnishes - Coating materials and coating systems for external masonry and concrete structures - Part 3: Determination of liquid water permeability
TS EN ISO 1248Iron oxide pigments - Specification and test methods
TS EN ISO 3251Paints, varnishes and plastics - Determination of non-volatile substances
TS EN ISO 3251Paints, varnishes and plastics - Determination of non-volatile substances
TS EN ISO 15181-5 Dyes and varnishes - Determination of the release rate of biocides from antifouling paints - Part 5: Calculation of the release rate of tolylfluanite and diclofluanite in the extract by the determination of dimethyltolisulfamide (dmst) and dimethylphenylsulfamide (dmsa).
TS EN ISO 21227-4 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Assessment of filiform corrosion
TS EN ISO 6270-2 Paints and varnishes - Determination of moisture resistance - Part 2: Process of exposing test specimen parts to condensate
TS EN 13355 + A1 Application plants - Application and drying rules - Safety rules
TS EN ISO 1248 / AC Iron oxide pigments - Specification and test methods
TS EN ISO 787-7 Test methods for pigments and fillers-Part 7: Determination of residue on sieve-Normal washing method
TS EN 50177 Automatically operated electrostatic spraying plants for flammable coating powders
TS EN 50348 Constant electrostatic application equipment for non-flammable liquid spray materials - Safety regulations
TS EN ISO 10890 Dyes and varnishes - Mass-balance calculation Modeling of the release rate of biocides from antifouling dyes
TS EN ISO 3251Paints, varnishes and plastics - Determination of non-volatile content
TS EN ISO 3251Paints, varnishes and plastics - Determination of non-volatile content
TS EN ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in other liquids other than water
TS 9473 ISO 14446 / T1 (Number Modification, TS 9473 EN ISO 14446) Binders for paints and varnishes - Determination of viscosity of industrial cellulose nitrate solutions and classification of such solutions
TS ISO 8130-1 / T1 (Number Modification, TS EN ISO 8130-1) Coating powders - Part 1: Determination of particle size distribution by sieving
TS ISO 8130-2 / T1 (Number Modification, TS EN ISO 8130-2) Coating powders - Part 2: Density determination by gas comparison pycnometer (reference method)
TS ISO 8130-3 / T1 (Number Modification, TS EN ISO 8130-3) Coating powders - Part 3: Density determination by liquid displacement pycnometer
TS ISO 8130-4 / T1 (Number Modification, TS EN ISO 8130-4) Coating powders - Part 4: Calculation of lower explosion limit
TS ISO 8130-5 / T1 (Number Modification, TS EN ISO 8130-5) Coating powders - Part 5: Determination of the flow properties of the powder / air mixture
TS ISO 8130-6 / T1 (Number Modification, TS EN ISO 8130-6) Coating powders - Part 6: Determination of the gelation time of thermoset coating powders at a given temperature
TS ISO 8130-7 / T1 (Number Modification, TS EN ISO 8130-7) Coating powders - Part 7: Determination of mass loss by firing
TS ISO 8130-8 / T1 (Number Amendment, TS EN ISO 8130-8) Coating powders - Part 8: Evaluation of storage stability of thermoset powders
TS ISO 8130-10 / T1 (Number Modification, TS EN ISO 8130-10) Coating powders - Part 10: Determination of deposition efficiency
TS ISO 8130-11 / T1 (Number Modification, TS EN ISO 8130-11) Coating powders - Part 11: Curved surface flow test
TS ISO 8130-12 / T1 (Number Modification, TS EN ISO 8130-12) Coating powders - Part 12: Determination of compatibility
TS ISO 8130-13 / T1 (Number Modification, TS EN ISO 8130-13) Coating powders - Part 13: Particle size analysis by laser diffraction
TS EN ISO 2812-2 Paints and varnishes - Determination of resistance to liquids section 2: Water immersion method
TS EN ISO 1519 Paints and varnishes - Bending test (cylindrical mandrel)
TS EN ISO 4619 Dryers for paints and varnishes
TS EN ISO 15234 Paints and varnishes - Tests of formaldehyde absorbed coatings and melamine foams - Determination of the stability of formaldehyde concentration in a small test sectionTS EN ISO 2811 - 2 Paints and varnishes - Density determination - Part 2: Dipped body (submersible) method
TS EN ISO 2811-4 Paints and varnishes - Determination of density - Part 4: Pressure vessel method
TS EN ISO 19334 Binders for paints and varnishes - Resin gum - Gas chromatographic analysis
TS EN ISO 29601 Paints and varnishes - Corrosion protection with protective paint systems - Porosity in dry film
TS EN ISO 29601 Paints and varnishes - Corrosion protection with protective paint systems - Porosity in dry film
TS EN ISO 2811-3 Paints and varnishes - Determination of density - Part 3: Release method
TS EN ISO 1518-1 Paints and varnishes-Scratch resistance test-Part 1: Constant loading test
TS EN 16074 Paints and varnishes - Determination of the splash rate and the solubility of the roll coating materials
TS EN ISO 6272-1 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 1: Weight reduction test, large area track remover
TS EN ISO 6272-2 Paints and varnishes - Rapid deformation (impact resistance) tests - part 2: Falling weight test, small area notching
TS EN ISO 4628-6 Paints and varnishes - Evaluation of the degradation of paint coatings - Density, quantity and size of defects of the general type - Part 6: Evaluation of chalking degree by adhesive tape method
TS EN 16105 Paints and varnishes - Laboratory method for the determination of substances from intermittent contact coatings with water
TS EN ISO 1518-2 Paints and varnishes - Determination of resistance to deformation - Part 2: Variable load method
TS EN ISO 12137 Paints and varnishes - Determination of resistance to deformation
TS EN 50580 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN ISO 2431 Paints and varnishes - Determination of flow time using flow containers
TS EN ISO 7783 Paints and varnishes - Determination of water vapor transmission rate - Cup method
TS ISO 787-17 Test methods for pigments-Part 17: Comparison of the color strength of white pigments
TS EN ISO 15184 Paints and varnishes - Determination of film hardness - Pencil test
TS EN 50177 / A1 Constant electrostatic application device for flammable coating powders - Safety rules
TS EN 927-3 Paints and varnishes-Coating materials and coating systems for outdoor wood materials-Part 3: Exposure test to natural weather conditions
TS EN ISO 2812-3 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an adsorbent medium
TS EN ISO 13129 Paints and varnishes - Electrochemical measurement of protection for steels with paint coatings - Intermittent current (CI) technique, attenuated voltage measurement technique and DC transient direct current (DCT) measurements
TS EN ISO 13632 Binders - for paints and varnishes - Resin - Sample preparation and sampling for color measurement
TS EN ISO 4628-8 Paints and varnishes - Evaluation of degradation of coatings - Demonstration of the size and quantity of defects and the intensity of trkregular changes in appearance - Part 8: Evaluation of the degree of separation and corrosion of layers around a scratch
TS EN ISO 9117-6 Paints and varnishes - Drying tests - Determination of print resistance
TS EN ISO 13076 Paints and varnishes - Lighting and processes - For visual inspection of coatings
TS EN ISO 20566 Paints and varnishes - Determination of scratch resistance of a coating system using a laboratory carwash tool
TS EN 927-1 Paints and varnishes - Coatings and coating systems for externally used wood materials - Section 1: Classification and selection
TS EN ISO 20567-3 Paints and varnishes - Determination of stone-notch resistance of coatings - Single impact test - Using free fall impact body
TS EN ISO 2409 Paints and varnishes - Cross-cutting test
TS EN ISO 9117-4 Paints and varnishes-Drying tests- Part 4: Test using mechanical recorder
TS EN ISO 9117-5 Paints and varnishes-Drying tests- Part 5: Adapted Bandow-Wolff test
TS EN ISO 1524Paints, varnishes and printing inks - Determination of fineness
TS 4969 Paints - Viscosity determination (with Brookfield viscometer)
TS EN ISO 15110 Paints and Varnishes - Artificial weather - Including acidic deposition
TS EN ISO 11890-2 Paints and varnishes-Volatile organic matter content (VOC) determination-Part 2: Gas chromatography method
TS EN ISO 3233-1 Paints and varnishes - Determination of the percentage volume of non-volatile material - Part 1: Method for the determination of non-volatile material using a coated test panel and the determination of dry film density by the Archimedes principle
TS EN ISO 15091 Paints and varnishes - determination of electrical conductivity and resistance
TS EN ISO 9038: Determination of flammability
tst EN 50177: 2009 Automatically operated electrostatic spraying plants for flammable coating powders
tst EN 50177: 2009 / A1 Constant electrostatic application device for flammable coating powders - Safety rules
TS EN ISO 11997-2 Paints and varnishes - Determination of resistance to repeated corrosion conditions - Part 2: Wet (salt fog) / dry / moist / uv radiation
TS EN ISO 16474-1 Paints and varnishes - Method of exposure to light sources in the laboratory - Part 1: General guide
TS EN ISO 16474-2 Paints and varnishes - Exposure method to laboratory light source - Part 2: Xenon-arc lamp
TS EN ISO 16474-3 Paints and varnishes - Exposure method to laboratory light source - Part 3: Fluorescent UV lamp
TS EN ISO 15711 Paints and varnishes - Determination of the resistance of the seawater exposed coatings to cathodic separation
TS EN 16402 Paints and varnishes - Evaluation of material release from coatings exposed to indoor air - Sampling, conditioning and testing
TS EN ISO 15528 Paints, varnishes and related raw materials - Sampling
TS EN 50580 / A1 Safety in electric power driven hand tools - Particular requirements for spray guns
TS EN ISO 11126-4 Preparation of steel surfaces - Before the application of paints and related materials - Properties of non-metallic abrasives used for blast cleaning - Part 4: Coal furnace slag
TS EN 50050-1 Hand-held electrostatic spraying equipment-Safety rules-Part 1: Hand-held spraying equipment for flammable liquid coating materials
TS EN 50050-2 Hand-held electrostatic spraying equipment-Safety regulations-Part 2: Hand-held spraying equipment for flammable coating powders
TS EN 50050-3 Hand-held electrostatic spraying equipment-Safety regulations-Part 3: Hand-held spraying equipment for flammable flock
TS 5808 / T1 Paints and varnishes - Waterborne coating materials and systems - for indoor walls and ceilings
TS EN 1062-11 Paints and varnishes - Coating materials and coating systems of concrete and masonry surfaces - Part 11: Pre-test conditioning methods
TS EN 1953 Atomizing and spraying equipment for coating materials - Safety regulations
TS EN 1953 Atomizing and spraying equipment for coating materials - Safety regulations
TS EN ISO 16925 Paints and varnishes - Determination of coating resistance - Against pressurized water jet
TS EN ISO 16927 Paints and varnishes - Determination of coating recoatability and coating ability
TS EN 15458 Active substances, algae, biocides, coating materials, recipes, efficacy, evaluation, film protectors, films, instruments, laboratory tests, microorganisms, dyes, preservation, preservatives, samples, test reports, test
tst EN 50050-1 Hand-held electrostatic spraying equipment-Safety regulations-Part 1: Hand-held spraying equipment for flammable liquid coating materials
tst EN 50050-2 Hand-held electrostatic spraying equipment-Safety regulations-Part 2: Hand-held spraying equipment for flammable coating powders
tst EN 50050-3 Hand-held electrostatic spraying equipment-Safety regulations-Part 3: Hand-held spraying equipment for flammable flock
TS EN 50580 Electric motor hand tools - Safety - Special rules for spray guns
TS EN 50580 / A1 Safety in electric power driven hand tools - Particular requirements for spray guns
EN 15457: 2014 Paints and varnishes - Laboratory method for testing the efficacy of film protectors against fungi in a coating
TS EN ISO 1524 Paints, varnishes and printing inks - Determination of fineness
TS EN ISO 11997-2 Paints and varnishes - Determination of resistance to repeated corrosion conditions - Part 2: Wet (salt fog) / dry / moist / uv radiation
TS EN ISO 3233-1 Paints and varnishes - Determination of the percentage by volume of non-volatile material - Part 1: Method for determination of non-volatile material using a coated test panel and determination of dry film density by Archimedes principle
TS EN ISO 15528 Paints, varnishes and related raw materials - Sampling
TS EN ISO 7783 Paints and varnishes - Determination of water vapor transmission properties - Cup method
TS EN 12581 + A1 Coating plants - Organic liquid coating materials - Electroplating and immersion coating machines - Safety rules
TS EN ISO 2808 Paints and varnishes - Film thickness determination (ISO 2808: 2007)
TS EN 50223 Constant electrostatic application equipment for flammable flocked materials - Safety regulations
TS EN 16623 Paints and varnishes - Reactive coatings for fire protection of metallic base materials - Definitions, requirements, specifications and marking
TS EN ISO 3679 Determination of flash and non-flash point - Fast equilibrium closed cup method
TS ISO 2846-1 Graphics technology - Color and permeability of ink series for four-color printing - Part 1: Heat-stabilized and sheet-fed web offset lithographic printing
TS ISO 2846-2 Graphic technology - Color and permeability of ink series for four-color printing - Part 2: Cold-fixed offset lithographic printing
TS ISO 10601 Micaceous iron oxide pigments for paints - Properties and test methods
tst ISO 10601 Micaceous iron oxide pigments for paints - Specifications and test methods
TS EN 50223 Automatic electrostatic application device for flammable materials in flotation - Safety rules
TS EN ISO 3233-3 Paints and varnishes - Determination of percentage non-volatile substance-3. Part volume: Determination by calculation from non-volatilematter content determined by ISO 3251, the density of the coating material and the density of the solvent as the coating material
tst EN ISO 4618Paints and varnishes - Terms and recipes
tst EN ISO 1513Paints and varnishes - Preparation of test and test specimens
tst EN ISO 2813 Paints and varnishes - Determination of non-metallic paint films at 20, 60 and 85 angles
tst EN ISO 787-7 Test methods for pigments and fillers-Part 7: Determination of residue on sieve-Normal washing method
tst EN ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Picnometer method
tst EN 15457 Paints and varnishes - Laboratory method for testing the efficacy of film protectors against fungi in a coating
tst EN ISO 9117-1 Paints and varnishes - Drying tests - Determination of complete drying condition and complete drying time
tst EN ISO 2431 Paints and varnishes - Determination of flow time using flow containers
tst EN ISO 9117-6 Paints and varnishes - Drying tests - Determination of print resistance
TS EN ISO 2409 Paints and varnishes - Cross-cutting test
tst EN ISO 1519 Paints and varnishes - Bending test (cylindrical mandrel)
tst EN ISO 8501-1 Preparation of steel substrates - Before the application of paint and related materials - Visual inspection of surface cleanliness - Part 1: Rust grades and degree of preparation of uncoated steel substrate surfaces and steel substrate surfaces after complete removal of previous coating
TS EN ISO 4628-1 Paints and varnishes - Evaluation of deterioration in paint coatings - Brief indication of the magnitude and quantity of defects and the severity of uniform changes in appearance - Part 1: General principles and short demonstration system
TS EN ISO 4628-2 Paints and varnishes - Assessment of deterioration in paint coatings - Brief indication of the magnitude of defects and the severity of uniform changes in appearance - Part 2: Evaluation of the degree of bubbling
TS EN ISO 4628-4 Paints and varnishes - Assessment of deterioration of paint coatings - Brief description of the magnitude and quantity of defects and the severity of uniform changes in appearance - Part 4: Evaluation of the degree of cracking
TS EN ISO 4628-5 Paints and varnishes - Assessment of deterioration in paint coatings - Brief indication of the size and quantity of defects and the severity of uniform changes in appearance - Part 5: Evaluation of the degree of flaking
TS EN ISO 4628-7 Paints and varnishes - Evaluation of degradation in coating - Evaluation of size and quantity of defects and density of uniform changes in appearance - Determination of degree of chalking with velvet method
TS EN ISO 4628-10 Paints and varnishes -Evaluation of deterioration in coating -Evaluation of size and quantity of defects and the intensity of uniform change in appearance -Faculty of filament corrosion
TS EN ISO 8623 Liquid resin fatty acids for paints and varnishes - Properties and test methods
TS EN ISO 4630 Clear liquids - Color determination by Gardner color scale
TS EN ISO 6271 Clear liquids - Color determination with platinum-cobalt scale
TS EN ISO 4628-3 Paints and varnishes - Evaluation of deterioration of paint coatings - Brief indication of the magnitude and quantity of defects and the severity of uniform changes in appearance - Part 3: Evaluation of the degree of corrosion
TS EN ISO 3233-2 Paints and varnishes - Determination of the percentage by volume of non-volatile material - Part 2: Method of determination of non-volatile material content in accordance with ISO 3251 and determination of dry film density on test sheets by Archimedes principle
TS EN 16492 Paints and Varnishes - Measurement of surface degradation caused by fungus and algae on coatings
TS EN ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Picnometer method
TS EN ISO 4624 Paints and varnishes - Tensile test for adhesion
TS EN ISO 7784-1 Paints and varnishes - Determination of abrasion resistance - Part 1: Abrasive paper coated wheel and rotary test specimen method
TS EN ISO 7784-2 Paints and varnishes - Determination of abrasion resistance - Abrasive rubber and rotary test specimen method (ISO 7784-2: 2016)
TS EN ISO 7784-3 Paints and varnishes - Determination of abrasion resistance - Part 3: Abrasive paper coated wheel and linear alternating test method (ISO 7784-3: 2016)
TS EN ISO 16482-1 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 1: Oven method
TS EN ISO 16482-1 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 1: Oven method
TS EN ISO 16482-2 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 2: Microwave method
TS EN ISO 16482-2 Binders for paints and varnishes - Determination of non-volatile matter content in aqueous resin dispersions - Part 2: Microwave method
Electrochemical impedance spectroscopy (EIS) of coated and uncoated metallic samples - Part 16773: Terms and definitions
Electrochemical impedance spectroscopy (EIS) in coated and uncoated metallic samples - Part 16773: Data collection TS EN ISO 2-2
Electrochemical impedance spectroscopy (EIS) of coated and uncoated metallic samples - Part 16773: Processing and analysis of data from model cells TS EN ISO 3-3
TS EN ISO 4629-1 Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without catalyst
TS EN ISO 4629-2 Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using catalyst
TS EN ISO 20567-2 Paints and varnishes - Determination of flaking resistance of coatings - Part 2: Single impact test with guided impact body
TS EN ISO 20567-1: 2017 Paints and varnishes - Determination of flaking resistance of coatings - Part 1: Multiple impact tests
TS EN ISO 150 Paints and varnishes - Crude, refined and boiled flaxseed oil - Properties and test methods
TS EN ISO 276: 2010 Binders for paints and varnishes-Stand oil linseed linseed oil-Properties and test methods
TS EN ISO 277: 2010 Binders for paints and varnishes-Raw china oil-Specifications and test methods
TS ISO 473 Lithopon pigments for paints - Properties and test methods
TS ISO 510 Red lead used in paints
TS EN ISO 787-25 General test methods for pigments and fillers - Part 25: Color comparison of white, black and colored pigments in full shade systems
TS EN 927-5 Paints and varnishes-Coating materials and coating systems for outdoor wood materials-Part 5: Evaluation of water permeability
TS EN 927-6 Paints and varnishes - Coating materials and coating systems for wood façades - Part 6: Artificial weathering of wood veneers using artificial fluorescent uv lamps and water
TS EN 1062-1 Paints and varnishes - Coating materials and systems for masonry and concrete façades - Part 1: Classification24.04.2006
TS EN 1062-3 Paints and varnishes - Coating materials and coating systems for masonry and concrete façades - Part 3: Determination of water permeability
TS EN 1062-11 / AC Paints and varnishes - Coating materials and coating systems for concrete and masonry exterior surfaces - Part 11: Pretreatment methods
TS EN 1062-6 Paints and varnishes - Coating materials and coating systems for masonry and concrete façades - Part 6: Determination of carbon dioxide permeability
TS EN 1062-7 Paints and varnishes - Coating materials and coating systems for masonry and concrete façades - Part 7: Determination of crack coverage
TS EN 1062-11 Paints and varnishes-Coating materials and coating systems for concrete and masonry surfaces - Part 11: Pre-test conditioning methods
TS EN 12757-1 + A1 Mixing machines for coating materials - Safety requirements - Part 1: Mixing machines for reprocessing vehicle surfaces
TS EN ISO 1513 Paints and varnishes - Preparation of test and test specimens
TS EN ISO 1520 Paints and varnishes - Immersion test
TS 1753 EN ISO 1516 Determination of flash point - Closed cup balance method
TS 1754 EN ISO 1523 Flash point determination - Closed cup balance method
TS 2325 EN ISO 787-8 General test methods for pigments and fillers - Part 8: Determination of water soluble matter - Cold extraction method
TS 2327 EN ISO 787-10 General test methods for pigments and fillers-Part 10: Density determination pycnometer method
TS 2328 EN ISO 787-11 General test methods for pigments and fillers - Part 11: Determination of the compressed volume and apparent density after compaction
TS 2579 ISO 787-1 General test methods for pigments and fillers-Part 1: Comparison of color of pigments
TS 2581 EN ISO 787-3 General test methods for pigments and fillers - Part 3: Determination of water-soluble substances - Hot extraction method
TS 2583 EN ISO 787-5 General test methods for pigments and fillers-Part 5: Determination of the oil absorption value
TS 2612 EN ISO 787-13 General test methods for pigments-Part 13: Determination of water-soluble sulfate, chloride and nitrates
TS 2613 EN ISO 787-14 General test methods for pigments-Part 14: Determination of the intrinsic resistance of the aqueous extract
TS 2614 EN ISO 787-15 General test methods for pigments and fillers section 15- Comparison of light fastness of similar pigments
TS 2614 EN ISO 787-15 / T1 General test methods for pigments and fillers section 15- Comparison of light fastness of similar pigments
TS 2615 EN ISO 787-16 General test methods for pigments and fillers-Section 16: Determination of relative tint changing powers (or equivalent coloring values) and color-opening powers of colored pigment
TS 2618 EN ISO 787-19 General test methods for pigments - Part 19: Determination of water soluble nitrates (salicylic acid method)
TS EN ISO 2810 Paints and varnishes - Exposure and evaluation of coatings to natural weather conditions
TS EN ISO 2812-4 Paints and varnishes - Determination of resistance to liquids - Part 4: Speckle method
TS EN ISO 2812-5 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature increasing oven method
TS ISO 2846-4 Graphic technology-Color and transparency of ink sets used in four-color printing-Part 4: Screen printing
TS ISO 2846-3 Graphics technology - Colors and transparency of the ink sets used in four-color printing - Part 3: Multiple gravure prints
TS EN ISO 2884-1 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Conical and plate viscometer operated at high shear rate
TS EN ISO 2884-2 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
TS EN ISO 3262-3 Fillers for paints - Properties and test methods - Part 3: Precipitated barium sulfate (blanc fixe)
TS EN ISO 3262-4 Fillers for paints - Specification and test methods - Part 4: Microcrystalline calcium carbonate (whiting)
TS EN ISO 3262-5 Fillers for paints - Properties and test methods - Part 5: Natural crystalline calcium carbonate
TS EN ISO 3262-6 Fillers for paints - Properties and methods - Part 6: Precipitated calcium carbonate
TS EN ISO 3262-7 Fillers for paints - Properties and test methods - Part 7: Dolomite
TS EN ISO 3262-9 Fillers for paints - Properties and test methods - Part 9: Calcined clay
TS EN ISO 3262-10 Fillers for paints - Specification and test methods - Part 10: Natural talc / chlorite with pulsed structure
TS EN ISO 3262-11 Fillers for paints - Properties and test methods - Part 11: Carbonate-containing pulsed natural talc
TS EN ISO 3262-12 Fillers for paints - Specification and test methods - Part 12: Muscovite mica
TS EN ISO 3262-13 Fillers for paints - Specification and test methods - Part 13: Natural masonry (ground)
TS EN ISO 3262-14 Fillers for paints - Properties and test methods - Part 14: Crystallite
TS EN ISO 3262-15 Fillers for paints - Properties and test methods - Part 15: Glassy silica
TS EN ISO 3262-16 Fillers for paints - Specification and test methods - Part 16: Aluminum hydroxide
TS EN ISO 3262-17 Fillers for paints - Properties and test methods - Part 17: Precipitated calcium silicate
TS EN ISO 3262-18 Fillers for paints - Properties and test methods - Part 18: Precipitated sodium aluminum silicate
TS EN ISO 3262-19 Fillers for paints - Specification and test methods - Part 19: Precipitated silica
TS EN ISO 3262-20 Fillers for paints - Specification and test methods - Part 20: Fume silica
TS EN ISO 3262-22 Fillers for paints - Properties and test methods - Part 22: Melted calcined diatomite (kieselguhr)
TS 4320 EN ISO 1514 Paints and varnishes - Standard panels for tests
TS EN ISO 4617 Paints and varnishes - List of equivalent terms
TS EN ISO 4623-2 Paints and varnishes - Determination of fiber corrosion resistance - Part 2: Aluminum base materials
TS EN ISO 4625-1 Binders for paints and varnishes - Determination of softening point - Part 1: Ring and ball method
TS EN ISO 4625-2 Binders for paints and varnishes - Determination of softening point - Part 2: Cup and ball method
tst EN 4628-6 Paints and varnishes - Evaluation of the degradation of paint coatings - Indication of density, quantity and size of general type defects - Part 6: Evaluation of chalking degree by adhesive tape method
TS EN ISO 6270-1 Paints and varnishes - Determination of moisture resistance - Part 1: Continuous condensation
tst EN ISO 6272-1 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 1: Weight reduction test, large area trace forming
tst EN ISO 6272-1 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 1: Weight reduction test, large area trace forming
TS EN ISO 6504-1 Paints and varnishes-Determination of covering strength-Part 1: Kubelka-Munk method for white and light colored paints
TS ISO 6504-3 / T2 (Number modification: TS EN ISO 6504-3) Paints and varnishes-Covering strength determination-Part 3: Determination of contrast ratio (opacity) of light color paints at constant application rate
TS ISO 6504-3 / T1 Paints and varnishes-Determination of covering strength-Part 3: Determination of the contrast ratio (opacity) of light color paints at a fixed application rate
TS 6610 EN ISO 3231 Paints and varnishes - Resistance to moisture atmospheres containing sulfur dioxide
TS 6611 EN ISO 3668Paints and varnishes - Visual comparison of the colors of the paints
TS EN ISO 6744-1 Binders for paints and varnishes - Alkyd resins - Part 1: General test methods
TS EN ISO 6744-2 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content
TS EN ISO 6744-3 Binders for paints and varnishes - Alkyd resins - Part 3: Determination of non-saponifying substance content
TS EN ISO 6744-4 Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content
TS EN ISO 7142 Binders for paints and varnishes - Epoxy resins - General test methods
TS EN ISO 7143 Paints, varnishes and binders - Test methods for the characterization of waterborne coatings and binders
TS 7517 ISO 3711 Lead chromate pigments and lead chromate-Molybdate pigments-Features and test methods
TS EN ISO 7579 Colorants-Determination of solubility in organic solvents-Gravimetric and photometric method
TS ISO 8005 Carbonaceous materials used in aluminum production - Raw and calcined coke - Determination of ash
TS EN ISO 8130-9 Coating powders - Sampling
TS EN ISO 8130-14 Coating powders - Part 14: Terms and definitions
TS 8314 EN ISO 3678 Paints and varnishes - Determination of resistance to printing TS EN ISO 8780-1 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 1: Introduction
TS EN ISO 8780-1 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 1: Introduction
TS EN ISO 8780-2 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 2: Dispersion using an oscillating agitator
TS EN ISO 8780-2 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 2: Dispersion using an oscillating agitator
TS EN ISO 8780-4 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 4: Dispersion using a bead mill
TS EN ISO 8780-4 Pigments and fillers-Dispersion methods for the evaluation of dispersion characteristics - Part 4: Dispersion using a bead mill
TS EN ISO 8780-6 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 6: Dispersion using a three-roll grinder
TS EN ISO 8780-6 Pigments and fillers - Dispersion methods for the evaluation of dispersion characteristics - Part 6: Dispersion using a three-roll grinder
TS EN ISO 8781-1 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 1: Evaluation of changes in relative pigmentation strength of colored pigments
TS EN ISO 8781-1 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 1: Evaluation of changes in relative pigmentation strength of colored pigments
TS EN ISO 8781-3 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 3: Evaluation from changes in brightness
TS EN ISO 8781-3 Pigments and fillers-Methods for the evaluation of dispersion characteristics-Section 3: Evaluation from changes in brightness
TS EN ISO 9117-1 Paints and varnishes - Drying tests - Determination of complete drying condition and complete drying time
TS EN ISO 9117-2 Paints and varnishes-Drying tests-Part 2: Pressure test for stacking resistance
TS EN ISO 9117-3 Paints and varnishes-Drying tests- Part 3: Surface drying test using ball method
TS EN ISO 9514 Paints and varnishes-Determination of pot life of liquid systems-Guide for preparation and conditioning of samples and experiments
TS EN ISO 10283 Binders for paints and varnishes - Determination of monomer diisocyanates in polyisocyanate resins
TS 10622 EN ISO 3549 Pigments - Zinc powder - Used in paints - Properties and test methods
TS EN ISO 11126-5 Preparation of steel surfaces - Non-metal abrasives used with compressed air for the application of paints and the like - Part 5: Refined nickel slag
TS 11487-1 ISO 9957-1 Liquid drawing instruments - Part 1: Water-based ink for tile - Specifications and test conditions
TS 11487-3 ISO 9957-3 Liquid drawing instruments - Part 3: Water-based color drawing inks - Specifications and test conditions
TS EN ISO 11890-1 Paints and varnishes - Determination of the content of volatile organic compounds (voc) - Part 1: Difference method
TS EN ISO 11908 Binders for paints and varnishes-Amino resins-General test methods
TS EN ISO 11909 Binders for paints and varnishes-Polyisocyanate resins-General test methods
TS EN ISO 11998 Paints and varnishes - Determination of wet scrub resistance and cleanability of coatings
TS ISO 12040 Graphic technology - Printing and printing inks - Evaluation of light fastness using filtered xenon arc light
TS EN 12206-1 Paints and varnishes - Aluminum and aluminum alloy coating for architectural purposes - Part 1: Coatings prepared from coating powder
TS EN 12215 + A1 Coating plants - Spray booths for the application of organic liquid coatings - Safety regulations
TS EN 12581 + A1 Coating plants - Organic liquid coating materials - Electrodeposition and dip coating machines - Safety requirements
TS EN 12621 + A1 Machines for the supply and circulation of pressurized coating materials - Safety regulations
TS ISO 12644 Graphics technology - Determination of rheological properties of pasty inks and thinners by falling shaft viscometer
TS EN 12878 Pigments used in the coloring of cement and / or lime based building materials - Properties and test methods
TS EN ISO 12944-1 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 1: General information
TS EN ISO 12944-2 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 2: Classification of the environment
TS EN ISO 12944-4 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 4: Surface types and surface preparation
TS EN ISO 12944-7 Paints and varnishes - Corrosion protection of steel structures with protective paint systems section 7: Application and inspection of painting processes
TS EN 12981 + A1 Coating plants - Spray baths for organic powder coating materials - Safety requirements
TS EN 13300 / AC Paints and varnishes - Waterborne coating materials and systems - For interior walls and ceilings - Classification
TS EN 13966-1 Determination of the effectiveness of atomizing and spray forming devices for liquid coating materials - Flat panels
TS EN ISO 14680-3 (Formerly: TS ISO 14680-3) Paints and varnishes-Determination of pigment content-Part 3: Filtration method
TS EN ISO 14680-1 (Formerly: TS ISO 14680-1) Paints and varnishes-Determination of pigment content-Part 1: Centrifuge method
TS EN ISO 14680-2 (Formerly: TS ISO 14680-2) Paints and varnishes-Determination of pigment content-Part 2: Ash method
TS ISO 14680-1 / tst T1 Paints and varnishes-Determination of pigment content-Part 1: Centrifuge method
TS ISO 14680-2 / tst T1 Paints and varnishes-Determination of pigment content-Part 2: Ash method
TS ISO 14680-3 / tst T1 Paints and varnishes-Determination of pigment content-Part 3: Filtration method
TS ISO 14680-1 / T1 (Number modification: TS EN ISO 14680-1) Paints and varnishes-Determination of pigment content-Part 1: Centrifuge method
TS ISO 14680-2 / T1 (Number modification: TS EN ISO 14680-2) Paints and varnishes-Determination of pigment content-Part 2: Ash method
TS ISO 14680-3 / T1 (Number modification: TS EN ISO 14680-3) Paints and varnishes-Determination of pigment content-Part 3: Filtration method
TS EN 15060 Paints and varnishes - Guidelines for the classification and selection of coating systems for wood-based materials in furniture used in buildings
TS EN ISO 15181-3 Dyes and varnishes - Determination of the release rate of biocides from antifouling dyes - Part 3: Calculation of zinc ethylene-Bis (dithiocarbamate) (zineb) release rate by determination of ethylenethioure concentration in extract
TS EN ISO 15181-4 Dyes and varnishes - Determination of the release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenyl borane (ptb) concentration in extract and calculation of release rate
TS EN ISO 15181-1 Dyes and varnishes - Determination of the rate of release of biocides from antifouling dyes - Part 1: General method for extraction of biocides
TS EN ISO 15181-2 Dyes and varnishes - Determination of the release rate of biocides from antifouling dyes - Part 2: Determination of the copper ion concentration in the extract and calculation of its release rate
TS ISO 15710 / T1 (Number modification: TS EN ISO 15710) Paints and varnishes - Corrosion test - Alternating immersion and removal of buffered sodium chloride solution
TS EN ISO 15715 Binders for paints and varnishes - Determination of turbidity
TS EN ISO 15880 Paints, varnishes and binders - Determination of shaft equivalent number of water-based coating materials and binders
tst EN 16105 Paints and varnishes - Laboratory method for the determination of substances from intermittent contact with water
TS EN ISO 16276-1 Corrosion protection of steel structures with protective paint systems - Evaluation and acceptance criteria for the adhesion (crack resistance) of a coating - Part 1: Tensile test
TS EN ISO 16276-2 Corrosion protection of steel structures with protective coating systems - Evaluation and acceptance criteria for the adhesion of a coating (crack resistance) - Part 2: Cross-cut test and x-cut test
TS EN ISO 16773-4 Paints and varnishes - Electrochemical impedance spectroscopy of coated samples with high impedance (eis) - Part 4: Spectrum samples of polymer coated samples
TS EN ISO 16805 Binders for paints and varnishes - Determination of glass transition temperature
TS EN ISO 16862 Paints and varnishes - Determination of bending resistance
TS EN ISO 17132 Paints and varnishes-T-Bending test
TS EN ISO 17872 Paints and varnishes - Guide to the disclosure of scratch marks in coatings on metallic panels for corrosion tests
TS EN ISO 17895 Paints and varnishes - Determination of volatile organic compound content in emulsion paints with low volatile organic compound content (volatile organic compound in cans)
TS EN ISO 21227-2 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging
TS EN ISO 21227-3 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of corrosion and folding around a scratch
TS EN ISO 28199-1 / AC Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 1: Related terms and descriptions and preparation of test panels
TS EN ISO 28199-2 Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 2: Color stability, covering power process, redissolution, over-spray absorption, wetting, surface texture and spotting
TS EN ISO 28199-3 Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 3: Visual assessment of bagging, bubble formation, pinhole and covering strength
TS EN ISO 28199-1 Paints and varnishes - Evaluation of the properties of coating systems related to the application process - Part 1: Related terms and descriptions and preparation of test panels
TS EN 50059 Specification for hand-held electrostatic spray equipment for non-flammable material used in painting and polishing
TS EN 50144-2-7Security of hand tools -Electric motorized section 2-7: Particular requirements for spray guns
TS EN 50176 Automatic electrostatic spraying plants for spraying flammable liquids
TS EN 50348: 2010 / AC: 2010 Constant electrostatic application equipment for flammable liquid spray materials - Safety rule
tst EN ISO 6272-2 Paints and varnishes - Rapid deformation (impact resistance) tests - Part 2: Weight reduction test, small area trace forming