• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Sealing Elements Standards for Pipe and Hose Kits

We have carried our service quality to the highest level in line with the studies we have shown in the sector for years in Pipe Leakage Tests. We provide the following standards for this sector.

 

TS EN 681-1 Elastomeric seals - for water and drainage applications - Material properties - Part 1: Rubber

TS EN 1514-1 Flanges and connections - Dimensions of gaskets according to rated pressures (pn) - Part 1: Non-metal flat gaskets with or without spacers

TS EN 1514-3 Flanges and connections - Dimensions of gaskets according to rated pressures (pn) - Part 3: Ptfe enveloped non-metal gaskets

TS EN 1514-4 Flanges and connections - Dimensions of gaskets according to rated pressures (pn) - Part 4: Specification for corrugated, flat or grooved metal and filled metal seals used with steel flanges

TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips

TS EN 751-2 Sealing materials - 1 th, 2 th and 3 are used for screw metallic connections in contact with hot gases and hot water - Part 2: Non-hardening gasket compounds

TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds

TS EN 12560-3 Flanges and connections - Gaskets for flanges with short pressure classes - Part 3: Non-metallic ptfe-wound gaskets

TS EN 12560-4 Flanges and connections - Seals for flanges with short pressure classes - Part 4: Corrugated, flat or grooved metallic and filled metallic seals for use with steel flanges

TS EN 12560-5 Flanges and connections - Seals for flanges with short pressure classes - Part 5: Metallic ring connection seals for use with steel flanges

TS EN 681-3 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 3: Porous rubber materials

TS EN 681-4 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 4: Cast polyurethane sealing elements

TS EN 681-1 / A3 Elastomeric seals for water and drainage applications - Material properties - Part 1: Rubber

TS EN 681-3 / A2 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 3: Porous rubber materials

TS EN 681-4 / A2 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 4: Cast polyurethane sealing elements

TS EN 682 / A1 Elastomeric seals - Material properties of gaskets for pipes and fittings used in the transport of gas and hydrocarbon liquids

TS EN 62339-1 Modular component interfaces for surface-mounted liquid distribution components - Part 1: Elastic seals

TS EN 681-1 / AC Elastomeric seals - For water and drainage applications - Material specifications - Part 1: Rubber

TS EN 681-1 / T1 Elastomeric seals - Used in water and drainage applications - Material specifications - Part 1: Rubber

TS EN 12560-2 Flanges and connections - Seals for flanges with short pressure classes - Part 2: Spiral wound seals for use with steel flanges

TS EN 13555: 2014 Flanges and their connections - Gasket parameters and experimental procedures in accordance with the design rules for gasketed circular flange connections

TS EN 13555 Flanges and connections - Gasket parameters and test procedures related to design rules for circular flange connections with gaskets

TS EN 1514-2 Flanges and connections - Dimensions of gaskets according to nominal pressures (pn) section 2: Spiral wound gaskets for use with steel flanges

TS EN 1514-2 Flanges and connections - Gaskets for flanges indicated by PN - Part 2: Spiral wound gaskets for use with steel flanges

ENST EN 681-2 / A2 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 2: Thermoplastic elastomers

TS 10911Cboard sheets - Fiber, graphite and polytetrafluoroethylene (PTFE) based - Used in gas valves, devices and pipelines

TS EN 681-2 Elastomeric seals - Used for pipe connections in sewage and drainage applications - Material properties - Part 2: Thermoplastic elastomers

TS EN 681-2 / A2 Elastomeric seals -Used for pipe connections in sewage and drainage applications -Material properties-Part 2: Thermoplastic elastomers

TS EN 681-1 / A2 Elastomeric seals - for water and drainage applications - Material properties - Part 1: Tire modification 2

TS EN 681-1 / A3 Elastomeric seals - For water and drainage applications - Material specifications - Part 1: Rubber

TS EN 1277 Plastic pipe systems-Thermoplastic pipe systems used in unpressurized applications underground-Tightness tests for elastomeric ring-type gasket connections

TS EN 1514-6 Flanges and connections - Dimensions of gaskets according to nominal pressures (pn) - Part 6: Coated serrated metal gaskets for steel flanges  

TS EN 1514-7 Flanges and connections - Dimensions of gaskets according to rated pressures (pn) - Part 7: Coated metal clad gaskets for steel flanges  

TS EN 1514-8 Flanges and connections - Dimensions of gaskets according to nominal pressures (pn) - Part 8: Polymer-based o-rings used in corrugated flasks  

Dimensions of the seals used with TS ISO 7483 Ts iso 7005 flanges

TS ISO 9691 Tire - Recommendations on the workmanship of pipe joint seals - Description and classification of defects

TS EN 12308 Plant and equipment for LNG - Conformity testing of gaskets designed for flanged connections in LNG piping systems

TS EN 12560-6 Flanges and connections - Gaskets for classed flanges - Part 6: Coated serrated metal seals for steel flanges

TS EN 12560-7 Flanges and connections - Gaskets for classed flanges - Part 7: Coated metal clad gaskets for steel flanges

TS EN 12560-1 Flanges and connections - Seals for flanges with short pressure classes - Part 1: Reinforced or non-reinforced, non-metallic flat seals

TS EN 13090 Gas pipe fitting - Seals for screw connections

TS EN 14741 Thermoplastic pipe and ducting systems - Connections used in non-pressurized applications underground - Test method for long term sealing performance of elastomeric seal connections with estimated sealing pressure

TS EN 14772 Flanges and their connections - Quality assurance inspection and testing of seals in accordance with the most 1514 and 12560 standard series