Packaging and Distribution Standards

As the world's leading auditing company that has been working in the industry for many years, we are interested in testing, auditing and certifying all of the following standards with unmatched accuracy, highly experienced experts, advanced inspection methods.

TS EN 13430 Packaging - Requirements for packaging recyclable by material recycling

TS EN 16288-1 Glass packaging for screw-coated pressure capsules - Part 1: Recycled glass MCA 3 coating

TS EN 61242 / A1 / AC Electrical auxiliary equipment - Cable reels for household and similar use

TS ISO 830 Freight containers

TSE K 419 Plastic Containers and Materials in Contact with Foodstuffs - Disposable

tst 12733 Papers - Semi-chemical corrugated sheet paper - used in the manufacture of corrugated board

TS EN ISO 15750-2 Packaging - Steel drums - Part 2: Non-opening drums with a minimum total capacity of 212 l, 216,5 l and 230 l

TS EN 60264-4-1 Packing of winding wires - Part 4-1: Test methods - Rolls made of thermoplastic material

TS EN 60264-2-2 Packing of winding wires section 2: cylindrical rollers part 2: returnable rollers made of thermoplastic material

TS EN ISO 21898 Packaging - Flexible, medium bulk bulk containers for non-hazardous materials (eodyk)

TS EN 16285 Packaging - Bendable Aluminum tubes - Test method for measuring the deformation of aluminum tube body (Guillotine test)

TS EN 12195-1 / AC Load holding devices in road vehicles - Safety - Part 1: Calculation of load-bearing forces

TS EN 16290-1 Glass packaging - Screw heads for pressure capsules - Part 1: Reusable glass MCA 7,5 R head

TSE K 351 / T1 Gray cardboard

TS EN 13593 Packaging - Paper bags for household waste collection - Types, specifications and test methods

TS EN 15433-6 Transport loads - Measurement and evaluation of dynamic and mechanical loads - Part 6: Automatic recording systems for measuring randomly monitored shocks during transport

TS EN ISO 20848-2 Packaging - Plastic drums - Part 2: Non-opening barrels with minimum total capacity 113,6 l to 220 l

TSE K 442 Plastic packaging for fuel and other flammable petroleum products

TS EN 1230-2 Paper and cardboard - Food contact - Sensory analysis - Part 2: Loss of flavor (degradation)

TS EN 60335-2-75 / A11 Safety regulations - for household and similar electrical appliances - Part 2-75: Particular requirements for commercial display and sale devices

TSE K 313 / T1 Medical waste collection bag - Polyethylene (PE)

tst 2017114353 Liquid soap dispenser and liquid soap dispenser systems - Used on walls

TS 1359 EN ISO 6346 Cargo containers - Coding, identification and marking

TS 1924 Cans for fruits and vegetables - cylindrical

TS EN ISO 16101 Packaging - Transport packaging of dangerous goods - Plastic compatibility tests

TS EN 12714 Plastic drums - Drums with 25 l to 60 l rated capacity, with lid opening and closing (with opening lid)

TSE K 157 Offset printed metal sheets

TS EN 16648 Cultural heritage protection - Transportation methods

tst 12732 Papers - Test flat sheet paper - used in the manufacture of corrugated board

TS EN 16289 Glass packaging for screw-coated pressure capsules - MCA 7,5 RF coated

TS EN 13027 Packaging - Thin metal containers - Open top boxes - Boxes defined according to their nominal gross capacities

TS EN 14391 Packaging - Bendable aluminum tubes - Tactile hazard signs

TS EN ISO 13355: 2016 Packaging - Fully loaded transport packages and unit loads - Vertical random vibration test

tst IEC 60191-5 Mechanical standardization of semiconductor elements - Part 5: Recommendations for the application of automatic tabbing to integrated circuit packages

TSE K 324 Liquid soap dispenser and liquid soap dispenser systems - used in walls

TS ISO 8058 Air cargo transport - Insulated container - Thermal efficiency characteristics

TS EN 12027 Adhesive tapes-Determination of flame resistance

TS EN 24178 Completely filled transport packages - Distribution trials - Information to be recorded

TS EN 15009 Aerosol containers - Compartment aerosol containers

TS EN 415-10 Packaging machines - Safety - Part 10: General features

TS EN 13117-2 Transport packaging - Reusable hard plastic distribution boxes - Part 2: General specifications and tests

TS EN 13011 Transport services - Goods transport chains - Performance requirements declaration system

TS EN 16593 Packaging - Hard plastic containers - PET mouth BVS 30H60

TS ISO 830 / Cor.1 Cargo containers - Terms

TSE K 359 / T1 Polypropylene sacks - general purpose

TS EN ISO 13127 / AC Packaging - Child resistant packaging - Mechanical test methods for resealable child resistant packaging systems

TS 6192 / T3 Aerosol Containers - Tin

tst 12731 Papers - Straw groove sheet paper used in the manufacture of corrugated board

TS EN 13047 Packaging - Bendable conical metallic tubes - Dimensions and tolerances

TS EN ISO 12777-1 Test methods for pallet connections - Part 1: Determination of bending strength of pallet nails, other dowel fasteners and hooks

TS EN ISO 12777-2 Test methods of pallet joints - Part 2: Determination of tensile and tensile strength of pallet nails and stacks

TS EN 14048 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in aqueous media - Method for measuring oxygen demand in a closed respirometer

Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for commercial display and sales devices

TS EN 415-4 Safety in packaging machines - Part 4: Pallet lifters - Pallet unloaders

TS EN 16292 Glass Packaging - Screw coated - Pressed threads

TS EN 16592 Packaging - Hard plastic containers - PET spout 29 / 25 (12,6)

TSE K 452 / D1 Paper Bag

TS EN 13427 Packaging - Requirements for the use of standards in the field of packaging and packaging waste

TS EN 16287-1 Glass packaging for screw-coated pressure capsules - Part 1: Recycled glass MCA 1 coating

TSE K 440 Packaging - Corrugated Cardboard Packaging Materials

TS EN ISO 12777-1 / A1 Test methods for pallet connections - Part 1: Determination of flexural strength of pallet nails, other dowel fasteners and hooks

TS EN 15384-2 Packaging - Test method for determining the porosity of the inner lining of flexible aluminum tubes - Part 2: Copper sulfate test

TS EN ISO 13274 / AC Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC - Technical Correction 1 (ISO 13274: 2013 / Cor 1: 2014)

tst EN ISO 16495 Packaging - Transport packaging for dangerous goods - Test methods

TS EN ISO 780 Packaging - Distribution Packaging - Graphic symbols for the storage and transportation of packages

TS EN 60264-5-2 Winding wires-Packing section 5-2: Cylindrical distribution rollers with conical flanges-Features of reusable reels made of thermoplastic material

TS EN 60335-2-75 / A2 Safety regulations - for household and similar electrical appliances - Part 2-75: Particular requirements for commercial display and sale devices

TS EN 60335-2-75 / A12 Safety regulations - For household and similar electrical appliances - Part 2-75: Particular requirements for commercial display and sales devices

TS 12728 Papers - Secondary fiber papers - Used in the manufacture of corrugated board

TS EN 15946 Conservation of cultural property - Packaging principles for transport

TS EN 13028 Packaging - Thin metal containers - Open top cans - Gas filled beverage cans defined by nominal filling volume

TS EN 16291-1 Glass packaging - Screw heads for pressure capsules - Part 1: Reusable glass MCA 2 head

TS EN 16290-2 Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 7,5 R head

TS EN 12726 Packaging - Mushroom head with inner diameter 18,5 mm for capsules with fungus and safety indicator

TS EN 12377 Packaging - Flexible tubes - Test method of air tightness of caps

TS EN 14375 Packaging - for pharmaceutical products - Non-reclosable packaging for children to open - Rules and tests

TS 9609 Corrugated board - Candle mass determination - Applied during curtain type coating process

TSE K 418 Plastic food trays with heat-proof lid

TS EN 452 Swap bodies - Class A bodies - Dimensions and general rules

TS EN 13545 Pallet superstructures-Pallet clamping ring-Test methods and performance requirements

TS EN ISO 15750-3 Packaging - Steel drums - Part 3: Flanged closure systems

tst 2016114259 Medical waste collection bag - Polyethylene (PE)

TS EN 60264-2-1 Packing of winding wires section 2: Cylindrical rollers section 1: Basic dimensions

TS EN 76 Packaging - For certain foods with ready packaging - Capacity of glass and metal containers

TS EN 862 Packaging - Child-resistant packaging - Rules and tests for non-reclosable packaging for non-pharmaceutical products

TS EN 13429 Packaging-Reusable packaging

TS EN 16288-2 Glass packaging for screw-coated pressure capsules - Part 2: Single-use glass MCA 3 coating

TS ISO 6517 Air transport - Cargo equipment - Containers approved for installation on the bottom of only high-capacity aircraft

TS EN ISO 12048 Packaging - Support filler transport bundles - Compression tester - Compression and stacking tests

TS 6444 EN 27023 Packaging - Bags - Sampling method from empty bags for testing

TS EN ISO 15750-1 Packaging - Steel drums - Part 1: Openable drums with minimum total capacity 208 l, 210 l and 216, 5 l

TS EN ISO 20848-3 Packaging - Plastic drums - Part 3: Pluggable closure systems for plastic drums with rated capacity 113,6 l to 220 l

TSE K 368 Autoclavable Medical Waste Bags - Polypropylene

TS 1639 EN 22206 Packaging-Filled transport packages-Identification of different parts during the test

TS EN 60335-2-75 Safety regulations - For electrical appliances used in households and similar places - Part 2-75: Particular requirements for commercial display and sale devices

TS 6718 EN 27965-1 Packaging-Bags-Drop test-Section 1: Paper bags

TS EN 13698-1 Pallet production features - Part 1: Construction specifications for flat wooden pallets in 800 mm x 1200 mm

TS EN 60335-2-75 / A1 Safety regulations - for household and similar electrical appliances - Part 2-75: Particular requirements for commercial display and sale devices

TS EN 13428 Packaging - Special requirements for production and composition - Prevention by resource reduction

TS EN ISO 13628-15 Oil and gas industry - Design and operation of underwater production systems - Part 15: Underwater and structures and manifolds

TS EN ISO 8611-3: 2012 Pallets for loading and unloading materials -Flat pallets-Section 3: Maximum operating loads

TS EN 12030 Adhesive tapes-Determination of impact resistance

TS EN 15593 Packaging - Hygiene management of food packaging - Rules

TSE K 457 Plastic Transport and Storage Crates

TS ISO 1496-1 Series 1 load containers - Identification and testing - 1. Section: General cargo containers for general purposes

TS EN 16247-4 Energy audits - Part 4: Transport

TS EN ISO 12777-2 Test methods for pallet connections - Part 2: Determination of the resistance to retraction and retraction of pallet nails and hooks

TSE K 207 Safe containers - Filling, handling and storage

TSE K 359 Polypropylene bags - General purpose

TS EN 16283 Packaging - Bendable Aluminum tubes - Test method for measuring membrane puncture strength

TS EN 13025-3 Packaging - Thin metal containers - Part 3: Round steel and tin containers with open lid (open lid) of nominal capacity 20000 ml, 25000 ml and 30000 ml "

TS 1640 EN ISO 2233 Packaging - Filled transport packaging and unit loads - Condition for testing

TS EN 16287-2 Glass packaging for screw-coated pressure capsules - Part 2: Single-use glass MCA 1 coating

TS EN 13044-3: 2011 Exchange devices - Marking - Part 3: Marking of semi-trailers for railway operation

TS EN 12031 Adhesive tapes - Determination of explosion strength

TS EN 15593 Packaging - Hygiene management in the production of packaging for foodstuffs - Requirements

TS EN ISO 445 Pallets for loading and unloading materials - Glossary

TS EN ISO 6346 / A3 Cargo containers - Coding, identification and marking

TS EN ISO 445 Pallets - For loading and unloading materials - Terms and definitions

TS EN 16291-2 Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 2 head

TS EN ISO 8106 Glass containers - Capacity determination by weighing method - Test method

TS EN 13431 Packaging - Packaging recovery conditions in the form of energy recovery, including the lowest calorific value

TS EN 14054 Packaging - Paper and cardboard packaging - Cardboard box designs

TS EN 1230-1 Paper and cardboard - Food contact - Sensory analysis - Part 1: Odor

TS ISO 3874: 1997 / Amd 3: 2005 Series 1 - Cargo containers - Transport and securing; Change 3: Double Stack Railway Car Operations

TS EN 415-1 Packaging machines - Safety - Part 1: Packaging machines and related equipment - Terms and classification

TS EN 60335-2-75 Safety rules - For electrical appliances used in homes and similar places - Part 2-75: Particular requirements for commercial display and sales devices (electrically or gas-heated)

Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for commercial display and sales devices

TS EN ISO 8611-1 Pallets for loading and unloading materials -Flat pallets-Section 1: Test methods

TS EN ISO 8611-2 Pallets for loading and unloading of materials -Flat pallets-Section 2: Performance requirements and selection of tests

TS 1641 EN ISO 2234 Packaging - Fully loaded transport packaging and unit loads - Static load stacking tests

TS EN 15006 Metal aerosol containers - Aluminum containers - 25,4 mm dimensions

TS EN 15433-1 Transport loads - Measurement and dynamic mechanical loads - Part 1: General requirements analysis

TSE K 452 Paper Bag

TS ISO 3874: 1997 / Amd 4: 2007 Series 1 - Cargo containers - Transport and securing; Change 4: 45 ft Containers

TS EN 16679: 2014 Packaging - tamper proof specifications for medical packaging

tst 2016109668 Sensory analysis - Testing of packaging materials for foodstuffs

TS EN ISO 12821 Glass packaging - 26 H 180 crown finish- Dimensions

TS EN ISO 18613 Repair of flat wooden pallets

TS EN 13698-1 Pallet production features-Part1: Construction characteristics of simple wooden pallets of 800mmx1200mm

TS EN 13876 - Transport - Service and logistics - Goods transport chains - Code applications for the delivery of cargo transport services

TS EN ISO 13274 Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (ISO 13274: 2013)

TS EN ISO 12777-1 / A1 Test methods for pallet connections - Part 1: Determination of flexural strength of pallet nails, other dowel fasteners and hooks

TS EN 16290-1 Glass packaging - Screw heads for pressure capsules - Part 1: Reusable glass MCA 7,5 R head

TS EN 12079-2 Offshore containers and lifting kits section 2: Lifting kits - Design, manufacture and marking

TS EN ISO 12818 Standard tolerances for glass packaging flocculants

TS EN 61242 / A13 Electrical auxiliary equipment - Cable reels for household and similar use

TS EN 415-3 + A1 Packaging machines - Safety - Part 3: Forming, filling and sealing machines

TS EN ISO 8351-2 Packaging-Requirements for bags - Part 2: Bags made of thermoplastic flexible film

TS 1118-3 EN ISO 90-3 Thin metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans

TS EN 61340-4-4 Electrostatic - Part 4-4: Standard test methods for special applications - Flexible medium size bag

TS EN 13199-2 Packaging - Lightweight load-carrying systems - Part 2: Stackable system for columns

TS 13719 Specific rules for the application of TS OIC / SMIIC 1 on halal food contact materials and articles

TS EN ISO 15750-1 Packaging - Steel drums - Part 1: Removable (open head) drums with minimum total capacity of 208 L, 210 L and 216,5 L (ISO15750-1: 2002)

TS EN 12674-4 Cylindrical containers - Performance requirements

TS EN 12410 Exchange bodies - Class A thermal exchange bodies - Dimensions and phenel properties

TS ISO 1496-2 Series 1 - Load containers - Specifications and tests - Part 2: Thermal containers

TS 1118-1 EN ISO 90-1 Thin metal containers - Definitions and determination of dimensions and capacities - Part 1: Open top boxes

TS EN 16210: 2013 Transport loads - Measurement and evaluation of climate and other loads - Data collection and general requirements for measuring devices

TS EN 767 Bags - Used in food transport - Made of jute / polyolefin woven fabric - Used in food transport

TS EN 14635 Glass containers - 26 h 126 capsule heads - Dimensions

TS EN ISO 15750-2 Packaging - Steel drums - Part 2: Non-opening drums with a minimum total capacity of 212 l, 216,5 l and 230 l

TS EN 868-5 Packaging materials and systems - For medical devices to be sterilized - Part 5: Bags and rolls of heat and self-resealable paper and plastic film - Specifications and test methods

TS ISO 3874: 1997 / Amd 2: 2002 Series 1 - Cargo containers - Transport and securing; Fix 2: Vertical tandem removal

TS EN 15384-1 Packaging - Test method for determining the porosity of the inner coating of flexible aluminum tubes - Part 1: Sodium chloride test

TS EN ISO 18613 Repair of flat wooden pallets

TS EN 12195-2 Load-holding equipment - Part 2: Network equipment made of sesame structure fibers - Safety regulations

TS EN 61340-4-4 / A1 Electrostatic - Part 4-4: Standard test methods for special applications - Electrostatic classification of flexible medium volume containers (FIBC)

TS EN 13440 Packaging - Recycling rate - Recipes and calculation method

TS EN 12710 Cardboard drums - Nominal capacity 15 l to 250 l - Drums with removable lid (open lid)

TS EN 60335-2-60 / A11 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-60: Particular requirements for whirlpool baths

TS EN 60264-2-3 Packing of winding wires section 2: Cylindrical rollers part 3: Specification for non-returnable rollers made of thermoplastic material

TS ISO 1496-2 Series 1 - Load containers - Specifications and tests - Part 2: Thermal containers

tkt 2015101684 CONTAINERS - USED FOR MILITARY PURPOSE

TS EN 60264-1 / A1 Packing of winding wires section 1-Clamps for round winding wires

TS EN 61316 Cable reels - Used in industry

TS EN ISO 8317 Child-resistant packaging - Rules and tests for reclosable packages

TS 8302 Energy distributing pillow (used for military purposes)

TS EN ISO 15750-3 Packaging - Steel drums - Part 3: Flanged closure systems

TS EN ISO 12777-3 Test methods for pallet connections - Part 3: Determination of the strength of pallet connections

TS EN 13593 Packaging - Paper bags for household waste collection - Types, specifications and test methods

TS EN 13626 Packaging - Box pallets - General rules and test methods

TS ISO 830 Freight containers

TS 13572 Specific rules for the implementation of TS OIC / SMIIC 1 on halal food packaging and packaging materials

TS EN ISO 13274 Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (Medium Bulk Containers)

TS 6011 EN 26599-1 Packaging-Bags-Conditioning for tests-Part 1: Paper bags

TS EN ISO 17351 Packaging - Braille lettering on the packaging of medicinal products

TS 1118-2 EN ISO 90-2 Thin metal containers - Definitions and determination of dimensions and capacities - Part 2: Containers for general use

TS EN 787 Bags for food transport - Bags made of polyethylene film

TS EN 12406 Exchange bodies - Class C thermal exchange bodies - Dimensions and general specifications

TS EN 14046 Packaging - Evaluation of final aerobic biodegradability and degradation of packaging materials under controlled composting conditions - Method of analysis of released carbon dioxide

TS EN 16064 Packaging - Hard plastic containers - Pet closure 30 / 25 high (18,5)

TS EN ISO 13274 / AC Packaging - Transport packaging for dangerous goods - Plastic compatibility tests for packaging and IBC (Medium Bulk Containers)

TS ISO 1161 Series 1 Load containers - Corner and interconnects - Specifications

TS EN 13430 Packaging - Recyclable packaging requirements with material recycling

TS ISO 1161 Series 1 load containers - Corner and intermediate fittings - Specifications

tst 5464-1 EN 862 (Priority 6) Packaging - For non-pharmaceutical products - Non-reclosable packages for child-opening - Rules and tests

TS EN 13025-1 Packaging - Thin metal containers - Part 1: Nominal filling volumes of round, cylindrical and truncated conical containers for general use up to 40000 ml "

TS EN 15543 / AC Glass packaging - Finishing elements for bottles - Threaded finishing elements for bottles for carbon-free liquids

TS ISO 1361 Thin metal containers - Open top cans - Internal diameters

TS EN 16287-1 Glass packaging - Screw heads for pressure capsules - Part 1: Reusable glass MCA 1 head

TS EN 16287-2 Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 1 head

TS EN 14391 "packaging - Foldable aluminum tubes - Hazardous tactile warnings"

TS EN 415-3 + A1 Packaging machines - Safety - part 3: Forming, filling and sealing machines

TS EN ISO 15006 Road vehicles - Ergonomic features of transport information and control systems - Features and compliance procedures for audible warnings in the vehicle

TSE K 313 Medical waste collection bag - Made of polyethylene (Pe)

TS EN 16291-2 Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 2

TS EN 13439 Packaging - Energy recovery rate - Definitions and calculation method

TS EN 60264-4-1 Packing of winding wires part 4: Test methods part 1: Reels made of thermoplastic material

TS EN 15007 Metal aerosol containers - Tin cans - Two and three-piece box sizes

TS EN ISO 16495 Packaging - Transport packaging for dangerous goods - Test methods

TS EN 24178 Filled full transport packages - Distribution trials, information to be recorded

TS EN 16063 Packaging - Hard plastic containers - Nomenclature of plastic closures

TS 10342 Polyethylene bags, general purpose

TS EN 415-2 Packaging machines - Safety - Part 2: Preformed container packaging machines

TS EN 868-8 Packaging materials and systems for medical devices to be sterilized - Part 8: Reusable sterilization containers for steam sterilizers in accordance with EN 285 - Specifications and test methods

TS EN 15008 Aerosol containers - Aluminum containers - 25,4 one-piece box sizes with mm rim

TS EN 13008 Steel drums - Lid-open (open lid) - Rated capacities from 15 liters to 62 liters

TS EN 14048 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in aqueous media - Method for measuring oxygen demand in a closed respirometer

TS EN 16067: 2011 Packaging - Hard plastic containers - Pet closure 26,7 (lead 9,00)

TS 7004 Air transport equipment - Pallet nets

TS 1142 Packaging-Steel hoops (hot rolled strip and cold drawn wires)

TS EN 28768 Packaging-Filled ready-to-carry transport packages-Tilting test

TS 9299 General and special pallets and containers for military use (stanag 2828)

TS EN ISO 15867 Bulk cargo containers for the intermediate processing of non-dangerous goods (adyk) "

TS EN 13590 Packaging - Flexible carrying bags for the transport of various retail goods - Test methods and general specifications for determination of carrying capacity and volume

TS EN 14182 Packaging - Terminology - Basic terms and definitions

TS EN 16065 Packaging - Hard plastic containers - Pet closure 30 / 25 low (16,8)

TS EN ISO 8611-2 / A1: 2016 Pallets for loading and unloading materials -Flat pallets-Section 2: Performance requirements and selection of tests

TS EN 16291-2 / AC Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 2 head

TS EN ISO 16106 Packaging - Transport packages for dangerous goods - Dangerous goods packaging, medium bulk containers (IBCs) and large packages - Guidance on the implementation of ISO 9001

TSE K 296 Plastic cleaning buckets - Double compartment, press

TS EN 16291-1 Glass packaging - Screw heads for pressure capsules - Part 1: Reusable glass MCA 2 head

TS EN 13628-2 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods

TS 12684 Authorized services - Packaging, labeling and filling machines - Rules

TS EN 415-6 Safety in packaging machines - Part 6: Pallet wrappers

TS EN 14479 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method

TS EN 12374 Packaging - Flexible tubes - Terms

TS EN 13025-2 Packaging - Thin metal containers - Part 2: Non-removable (open lid) round steel and tin containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml "

TS EN ISO 7965-2 Bags-Drop test-Section 2: Bags made of thermoplastic film

TS EN ISO 8367-1 Packaging - Dimension tolerances for general purpose bags - Part 1: Paper bags

TS EN 60264-3-2 Winding wires - Packaging - Part 3-2: Delivery rollers - Conical - Specification for returnable rollers made of thermoplastic material

TS EN 13010 Packaging - Unit packaging - Dimensions and specifications for handle designation

TS EN 12079-3 Offshore containers and lifting kits section 3: Periodic inspection review and test

TS EN 60335-2-60 / A12 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-60: Particular requirements for whirlpool baths

TS 3026 Kraft paper (for heavy duty bags)

TS EN 14847 Aerosol containers - Cans-25,4 mm dimensions

TS EN 61242 Electrical auxiliary equipment - Cable reels for household and similar use

TS EN 50597 Vending Machines Energy Consumption

TS EN 768 Bags - Used for food transport - Lined bags made of cotton fabric

TS EN 16247-4 Energy Inspections - Part 4: Transportation

TS EN 13972 Hard plastic containers - Description of nominal, wiping and total capacities, wiping and measuring total capacity

TS EN 13973 Hard plastic containers - Method of determination of emptability

TS EN 14045 Packaging - Evaluation of the degradation of packaging materials by tests for applications under defined composting conditions

TS EN 16066 Packaging - Hard plastic containers - Pet closure 26,7 (lead 6,35)

TS ISO 668 Series 1 freight containers - Classification, dimensions and gross masses

TS EN ISO 12777-1 Pallet joints - Test methods - Part 1: Determination of flexural strength of pallet nails, other dowel binders and punches

TS EN 60335-2-75 / A1 Safety rules - For electrical appliances used in homes and similar places - Part 2-75: Particular requirements for commercial display and sales devices (electrically or gas-heated)

TS EN 16290-2 Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 7,5 R head

TS ISO 10531 Packaging-Filled, ready-to-move transport packages-Stability test of unit loads

TS EN 15009 Aerosol containers - Compartment aerosol containers

TS EN 13044-2 Exchange devices - Marking - Part 1: Marking of freight transport trailers related to railway operation

TS EN 14053 Packaging - Corrugated cardboard or cardboard packaging

TS EN ISO 17351 Packaging - Embossed packaging for medical products

TS EN 13592 Plastic bags for household waste collection - types, properties and test methods

TS EN 1230-1 Paper and cardboard - Food contact - Sensory analysis - Part 1: Odor

TS 1119 Corrugated board

TSE ISO / TS 24533 Intelligent transport systems - Electronic information exchange to facilitate transport and versatile transfer - Road transport information exchange methodology

TS 13286 Fresh fruit and vegetables - Mixed packaging rules

TS EN 13974 Hard plastic containers - Dimensions, mass and volume tolerances

TS EN 14047 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in aqueous media - Method of analysis of released carbon dioxide

TS EN 277 Sacks - used in food transport - made of polypropylene woven fabric

TS EN 13628-1 Oil and gas industry - Design and operation of seabed production systems - Part 1: General requirements and recommendations

TS EN 12079-1 Offshore containers and lifting kits section 1: Offshore containers-Design manufacturing and marking

TS EN 12195-1 / AC Load holding devices in road vehicles - Safety - Part 1: Calculation of load-bearing forces

TS EN 14477 Packaging - Flexible packaging material - Determination of puncture strength - Test methods

TS EN 16068 Packaging - Hard plastic containers - Pet closure 38

TS EN 60264-3-3 Packing of winding wires section 3: Tapered rollers part 3: Specification for non-returnable reels made of thermoplastic material

Safety regulations for electrical appliances used in homes and similar places

TS EN ISO 15119 (Formerly: TS ISO 15119) Packaging - Bags - Determination of friction coefficient of filled bags

TS ISO 830 / Cor 1 Freight containers

TS 1509 EN 13382 Flat pallets for loading and unloading materials - Basic dimensions

TS 4331 Packaging - General principles - Part 3: Marking and labeling of packages

TS ISO 1496-1 Series 1 Cargo containers - Identification and tests - 1. Section: General Cargo Containers for General Purposes

TS EN 12029 Adhesive tapes-Determination of corrosive ions soluble in water

TS EN 16293 Packaging - Glass Packaging - BVS coated for reusable Wines

TS EN 13044-1: 2011 / AC Interchange devices - Marking - Part 1: Marking for identification

TS EN ISO 7459 Glass containers - Thermal shock resistance and thermal shock resistance - Test methods

TS EN 13428 Packaging - Special requirements for production and composition - Prevention by welding reduction

TS EN 13429 Packaging - Reuse

TS EN ISO 13127 Packaging - Child resistant packaging - Mechanical test methods for resealable child resistant packaging systems

TS EN 13025-3 Packaging - Thin metal containers - Part 3: Round steel and tin containers with open lid (open lid) of nominal capacity 20000 ml, 25000 ml and 30000 ml "

TS EN 16288-1 Glass Packaging - For screw heads for pressure capsules - Part 1: Reusable glass MCA 3 head

TS EN 16288-2 Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 3 head

TS EN 415-4 Packaging machines - Safety - Part 4: Palletizing and palletizing machines

TS EN 415-2 Packaging machines - Safety - Part 2: Packaging machines for preformed rigid containers

TS EN 29885 Wide-mouthed glass containers-Deviation of the upper sealing surface from the flatness-Test methods

TS EN 14054 Packaging - Paper and cardboard packaging - Cardboard design

TS 13718 Cans

TS EN 16291-2 / AC Glass packaging - Screw heads for pressure capsules - Part 2: Disposable glass MCA 2 head

TS EN 16565 Packaging - Flexible tubes - Test method for determining the direction of the flip top cap

TS 90 Cans (for fish products)

TS 90 / T1 Cans (for fish products)

TS EN 283 Cargo transport crates - Exchangeable - Tests

TS EN 284 Cargo transport crates - Replaceable - Class c - Dimensions and general specifications

TS EN 415-7 + A1 Safety of packaging machines - Part 7: Group packaging machine

TS EN 415-8 Safety section in packaging machines 8: Strapping machines

TS EN 415-9 Safety of packaging machines - Part 9: Methods of noise measurement of packaging machines, packaging lines and related equipment, accuracy 2 and 3

TS EN 415-5 + A1 Safety of packaging machines - Part 5: Wrapping machines

TS EN 452 Cargo transport crates - Class a cargo transport crates - Dimensions and general specifications

TS EN 631-1 Materials and articles in contact with foodstuffs - Catering containers - Part 1: Dimensions of containers

TS EN 631-2 Materials and articles in contact with foodstuffs - Catering containers - Part 2: Dimensions of accessories and supports

TS EN 765 Bags - Used in food transport - Made of polyolefin woven fabric other than polypropylene

TS EN 766 Sacks - Used in food transport - Made of jute fabric

TS EN 769 Bags - For transport of food aid - Made of cotton / polyolefin woven fabric

TS EN 770 Bags for food transport - Paper bags

TS EN 788 Sacks - Used for food transport - Cylindrical bags made of composite film

TS ISO 1496-5 Series 1: Cargo containers - Specification and tests - Part 5: Platform and platform-based containers

TS EN 15010 Aerosol containers - Aluminum containers - Basic dimension tolerances for rivets

TS EN 1086 Bags - Recommendations for the selection of bag and liner type for the product to be packaged for transport of food aid

TS 1142 Packaging-Steel hoops (hot rolled strip and cold drawn wires)

TS EN 1230-2 Paper and cardboard - Food contact - Sensory analysis - Part 2: Loss of flavor (degradation)

TS 1642 EN 22248 Packaging - Filled transport packages - Lowering impact test

TS 1643 EN ISO 2244 Packaging - Fully loaded transport packaging and unit loads - Horizontal impact tests

TS 1644 EN ISO 2247 Packaging - Filled transport packages and unit loads - Vibration tests at constant low frequency

TS 1645 EN ISO 2873 Packaging - Filled transport packaging and unit loads - Low pressure test

TS 1647 EN ISO 2875 Packaging - Filled transport packaging and unit loads - water spray test

TS 1648 EN 22876 Packaging - Filled transport ready transport packages - Roll test

Main dimensions of TS 1738 pallet carriers

TS 1891 Wooden packagings (terms, recipes and measurement methods)

TS 2969 Packaging of radioactivity substances - Tests for radioactive material and radiation leakage

TS 3026 Kraft paper (for heavy duty bags)

TS 3219 EN 60264-3-1 Winding wires - Packaging section 3-1: Delivery rollers - Conical - Basic dimensions

TS 3220 EN 60264-1 Packing of winding wires section 1-Buckets (containers) for round winding wires

TS 3220 EN 60264-1 / A1 Packing of winding wires section 1: Buckets for round winding wires (containers)

TS 3258 Glass containers - bottles and jars - heads - shapes and sizes

TS 3258 / T1 Glass containers - bottles and jars - heads - shape and dimensions modified 1

TS 13316 Sample containers - For crude oil, fuel and mineral oils - Used for the storage and transportation of the sample

TS ISO 3676 Packaging-Unit load sizes-Dimensions

TS 3766 Transport packages dimensions of rigid, rectangular prism-shaped transport packages

TS ISO 3874 Series 1 - Cargo containers - Transport and securing

TS 4278 Packaging-General principles section 1-Packaging selection and packaging methods

TS 4279 Packaging-General principles section: Storage of 2 packaging material

TS 5415 Wooden packing crate

TS 5415 / T1 Wooden packing crate

TS 5453 Canister, metal 20 liter (for military purposes)

TS EN ISO 5457 / T1 Technical product documentation - Folding and drawing of drawing sheets 1

TS EN ISO 5457 Technical product documentation - Folding and dimensions of drawing sheets

TS 5516 Aerosols part i-Terms and recipes

TS 5517 Aerosols Part II-Safe filling rules

TS 5518 Aerosols Part III-Marking Rules

TS 5519 Aerosols section iv-Spray rate determination

TS 5520 Aerosols Part v-Flammability Determination

TS 5521 Aerosols section vi-Determination of incompatibility between the formulation and the aerosol container

TS 5522 Aerosols Part VI-Pressure Tests for Metal Aerosol Containers

TS 5613 EN 23-1 Packaging - For powders for washing and cleaning - Dimensions and volumes of cardboard and cardboard boxes and cardboard bins

TS 5943 Aerosol containers-Aluminum

TS 5943 / T1 Aerosol containers-Aluminum

TS 6043 Corrugated board-Dipping method to determine the water resistance of the glue bond

TS 6045 Corrugated board - Determination of the weight of paper components after separation

TS 6102 Aerosols - Part VIII - Determination of infiltration

TS 6103 Aerosols - Part Ix - Net Assay

TS 6104 Aerosols - Part x - Internal pressure determination

TS 6105 Aerosols section xı-Determination of water content

TS 6192 Aerosol Containers - Tin

TS 6445 EN 26590-1 Packaging-Bags-Terms and types of bags-Part 1: Paper bags

TS 6528 Fresh fruits and vegetables - Rules for placing parallel-faced packages on land transport vehicles

TS 6605 Aerosol products-General features

TS 6716 EN 28474 Packaging - Filled transport packages - Immersion test

TS ISO 6780 Flat pallets for intercontinental material handling - Basic dimensions and tolerances

TS 7003 Air transport equipment - Pallets

TS 7083 Plastics - Packaging rules

TS 7334 Laminated aluminum foils - Prepared using adhesive

TS ISO 7348 Glass packaging - Manufacturing - Terms and definitions

TS 7552 Adhesive tapes for packaging - Paper tapes-Pressure sensitive

TS 7553 Adhesive tapes for packaging - Polypropylene film tapes

TS 7554 Adhesive tapes for packing-Polyvinylchloride film tapes

TS 7770 EN ISO 7458 Glass containers - Internal pressure resistance - Test methods

TS 7771 EN ISO 8113 Glass containers - Vertical load resistance - Test method

TS 8150 Total amount of wax on corrugated board

TS ISO 8164 Glass containers-European bottles of 520 ml-Dimensions

TSE ISO TR 8281-1 Packaging-Estimating filling volume using flattened bag sizes - Part 1: Paper bags

TS EN ISO 8351-1 Packaging-Specifications for bags-Part 1: Paper bags

TS EN ISO 8367-2 Packaging - General purpose bags dimension tolerances for dimension - Part 2: Bags made of thermoplastic flexible film

TS 8379 Functional characteristics of self-propelled scissor-type loading equipment for loading air containers and uncontainable loads

TSE ISO / TR 8610 Thin metal containers - Air-vented, soldered, round cans for milk and dairy products capacity and corresponding diameters

TS 8762 Packing cushioning material-Polystyrene foam

TS 9033 Air freight equipment - Transport systems for unit cargo equipment - Symbols for illustration

TS ISO 9056 Glass Containers - Pilfer proof series - Dimensions

TS ISO 9057 Glass containers - Push-in heads - 28 mm diameter - For pressurized liquids - Dimensions

TS ISO 9058 Glass containers-Tolerances

TS EN ISO 9100-1 Glass containers - Vacuum protruding heads - Part 1: General

TS EN ISO 9100-2 Glass containers - Vacuum protruding heads - Part 2: 33 medium

TS EN ISO 9100-3 Glass containers - Vacuum protruding heads - Part 3: 38 normal

TS EN ISO 9100-4 Glass containers - Vacuum protruding heads - Part 4: 38 medium

TS EN ISO 9100-5 Glass containers - Vacuum protruding heads - Part 5: 43 and 48 normal

TS EN ISO 9100-6 Glass containers - Vacuum protruding heads - Part 6: 53 and 58 normal

TS EN ISO 9100-7 Glass containers - Vacuum protruding heads - Part 7: 58 deep

TS EN ISO 9100-8 Glass containers - Vacuum protruding heads - Part 8: 63, 66 and 70 normal

TS EN ISO 9100-9 Glass containers - Vacuum protruding heads - Part 9: 63, 66 and 70 deep

TS EN ISO 9100-10 Glass containers - Vacuum protruding heads - Part 10: 77 normal

TS EN ISO 9100-11 Glass containers - Vacuum protruding heads - Part 11: 82 normal

TS EN ISO 9100-14 / AC Glass containers - Vacuum protruding heads - Part 14 - 110 normal

TS EN ISO 9100-12 Glass containers - Vacuum protruding heads - Part 12: 89 normal

TS EN ISO 9100-13 Glass containers - Vacuum protruding heads - Part 13: 100 normal

TS EN ISO 9100-14 Glass containers - Vacuum protruding heads - Part 14: 110 normal

TS EN ISO 9100-4 / AC Glass containers - Vacuum protruding heads - Part 4: 38 medium

TS EN ISO 9100-2 / AC Glass containers - Vacuum protruding heads - Part 2: 33 media

TS 9609 Corrugated board - Candle determination - Applied during curtain type coating process

TS 9680 Wrapping paper (for packaging)

TS 9700 Yogurt containers-Polystyrene

TS 9700 / T1 Yogurt containers - Polystyrene

TS ISO 9884-1 Tea bags-Specifications section 1-Reference bag for transporting tea with pallets and containers

TS ISO 9884-2 Tea bags-Features-Part 2: Performance characteristics of bags for carrying pallet and container tea

TS ISO 10154 Thin-walled coatings - Three-piece tinplate aerosol containers top lid sizes

TS 10341 Plastic bags - for neutral and slightly corrosive liquids

TS 10341 / T1 Plastic bags - for neutral and slightly corrosive liquids

TS 10341 / T2 Plastic bags - for neutral and slightly corrosive liquids

TS EN ISO 10374 Cargo containers - Automatic identification

TS 10654 Oil-proof paper (imitation parchment) - used for packaging food products

TS 11359 Packaged goods and products-Control principles of mass and volume

TS 11670 Pulses and grains packaging - General rules

TS EN ISO 11683 Packaging - Tactile hazard signs - Rules

TSE ISO / TR 11761 Thin metal containers - Open top round boxes - Classification of box sizes according to construction type

TSE ISO / TR 11762 Thin metal containers - Open-top round boxes for gas-filled liquid products - Classification of box sizes by type of construction

TS 11764 ISO 1496-3 Series 1 load containers - Specifications and tests - Part 3: Tank containers for liquids, gases and compressed dry cargoes

TSE ISO / TR 11776 Thin metal containers - Non-round open top boxes - Cans according to rated capacity

TS EN ISO 11897 Packaging - Bags made of thermoplastic flexible film - Tear progression from edge folds

TS ISO 11944 General purpose thin metal round containers - nominal diameters of cylindrical and truncated conical boxes up to 10000 ml capacity

TS 11980 Strapping buckles for steel packaging straps

TS EN 12025 Adhesive tapes-Measurement of tear strength by pendulum method

TS EN 12028 Adhesive tapes-Measurement of elongation and elongation under static load

TS EN 12032 Adhesive tapes-Measurement of adhesion of thermoset adhesive tapes during curing

TS EN 12033 Adhesive tapes-Measurement of adhesion of thermoset adhesive tapes after curing

TS EN 12034 Adhesive tapes-Measuring the lengths of roll adhesive tapes

TS EN 12036 Adhesive tapes-Solvent penetration into adhesive masking tapes

TS EN ISO 12048 Packaging - Completed, filled transport packages - Compression and stacking test with compression device

TS EN 12195-4 Load holding devices on road vehicles - Safety - Part 4: Steel load ropes "

TS EN 12195-3 Load holding devices on road vehicles - Safety - Part 3: Chains

TS EN 12195-1: 2010 Load holding devices in road vehicles - Safety - Part 1: Calculation of load-bearing forces

TS EN 12246 Quality grades of sawn timber for use in packaging and pallets

TS EN 12248 Sawn timber for industrial packaging - Permissible deviations and preferred dimensions

TS EN 12249 Sawn timber for pallets - Guide for permissible deviations and dimensions

TS EN 12410 Cargo transport crates - Replaceable - Class a, thermal load transport crates - Dimensions and general specifications

TS EN 12640 Load securing in road vehicles - Mounting points in commercial vehicles used in freight transport - Minimum rules and tests

TS EN 12641-1 Cargo transport crates - Interchangeable - Awnings - Part 1 - Minimum requirements

TS EN 12641-2 Cargo transport crates and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for side covers

TS EN 12674-1 Cylindrical containers - Part 1: Terms

TS EN 12674-2 Cylindrical containers - Part 2: General design and safety principles

TS EN 12674-3 + AC Cylindrical containers - Part 3: Test methods

TS EN 12707 Plastic drums - 210 l and 225 l rated drums with one lid (tight lid)

TS EN 12709 Plastic drums - Drums with the smallest total capacity of 230 l that can be opened once (with tight lid)

TS EN 12712 Plastic bins - Bins with rated capacity 20 l to 60 l - for optimal use of pallets with dimensions 800 mm x 1200 mm and 1000 mm x 1200 mm

TS EN 12713 Plastic containers - Screw-on closure systems - rated capacity 20 l to 60 l

TS 12729 Papers - White faced kraft plain paper - Corrugated board

TS 12730 Papers - Kraft flat sheet paper - Used in corrugated board manufacturing

TS 12731 Papers - Straw groove sheet paper used in the manufacture of corrugated board

TS 12732 Papers - Test flat sheet paper - Used in the manufacture of corrugated board

TS 12733 Papers - Semi-chemical corrugated sheet paper - Used in corrugated board manufacturing

TS 12734 Paper and cardboard- Determination of annular crush strength

TS 12735 Groove layer - Determination of vertical crush strength after corrugation in laboratory

TS 12735 / T1 Groove layer - Determination of vertical crush strength after corrugation in laboratory

TS EN ISO 12777-3 Test methods for pallet connections - Part 3: Determination of the strength of pallet connections

TS EN 13007 Steel drums - Can not be closed (tightly closed) - Rated capacity is from 20 liters to 60 liters

TS EN 13010 Packaging - Unit packaging - dimensions and specifications for grip display

TS EN 13026 Packaging - Fine metal packaging - General purpose filling volumes of non-round, cylindrical and cut-tapered metal containers up to 30000 ml for general use

TS EN 13029 Packaging - Thin metal containers - Openings for plastic stoppers

TS EN 13044-1: 2011 Interchange devices - Marking - Part 1: Marking for identification

TS EN 13045 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

TS 4812 EN 13046 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances

TS 4812 EN 13046 / T1 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances modified 1

TS EN 13048 Packaging - Bendable aluminum tubes - Inner lacquer film thickness measurement method

TS EN 13054 Packaging-Filled, ready-to-carry transport packages-Test methods for determination of the center of gravity of the package

TS EN 13117-1 Transport packaging-Reusable hard plastic distribution boxes-Part 1: General purpose

TS EN 13193 Packaging - Packaging and environment - Terms and definitions

TS EN 13199-1 Packaging - Light load carrying systems - Part 1: General specifications and test methods

TS EN 13199-3 Packages - Lightweight load-carrying system - Part 3: Stackable system with connection (bis)

TS EN 13246 Packaging-Stretched steel hoops-Specifications

TS EN 13247 Packaging-Tension straps for lifting, fastening and securing loads-Features

TS EN 13393 Packaging-Edge protectors-Features

TS EN 13394 Packaging-Stretched hoops-Non-metallic-Features

TS EN 13427 Packaging - Rules for the use of standards in the field of packaging and packaging waste

TS EN 13432 Packaging-Biodegradable and compostable recyclable packaging characteristics-Test steps and evaluation criteria for acceptance of packaging

TS EN 13432 / AC Packaging-Biodegradable and compostable recyclable packaging characteristics-Test steps and evaluation criteria for the acceptance of the packaging

TS EN 13437 Packaging and material recycling - Criteria for recycling methods - Definition of recycling processes and flow diagram

TS EN 13626 Packaging - Boxed pallets - General rules and test methods

TS EN 13676 Polymer coated paper and cardboard in contact with food

TSE CR 13686 Packaging - Optimization of energy recovery from packaging waste

TS EN 13698-2 Pallet production features - Part 2: Construction specifications for flat wooden pallets in 1000 mm x 1200 mm

TS EN 13876 Transport - Support and services - Goods transport chains - Code implementation for the supply of freight transport services

TS EN 13891 Clamping rings - Guide for selection and selection of clamping rings

TS EN 13972 Hard plastic containers - Description of nominal, wiping and total capacities, wiping and measuring total capacity

TS EN 13973 Hard plastic containers - Method for determination of emptability

TS EN 13974 Hard plastic containers - Dimensions, mass and volume tolerances

TS EN 14045 Packaging - Evaluation of the degradation of packaging materials by tests for applications under defined composting conditions

TS EN 14046 Packaging - Evaluation of final aerobic biodegradability and degradation of packaging materials under controlled composting conditions - Method of analysis of released carbon dioxide

TS EN 13461 Packaging - Flexible cylindrical laminated tubes - Dimensions and tolerances

TSE CR 13504 Packaging - Material recovery - Criteria for recycled minimum material content

TS EN 13590 Packaging - Flexible carrying bags for the transport of various retail goods - Test methods for determination of carrying capacity and volume in general

TS EN 14047 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in aqueous media - Method of analysis of released carbon dioxide

TS EN 14053 Packaging - Packaging materials made of plain or corrugated cardboard - Types and construction

TS EN 14149 Packaging - Fully loaded transport packages and unit loads - Impact test by turning and dropping

TS EN 14182 Packaging - Terminology - Basic terms and definitions

TS EN 14401 Rigid plastic containers - Test methods for suitability of closures

TS EN 14477 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods "

TS EN 14479 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography

TSE CEN / TR 14520 Packaging - Reuse - Methods for determination of error and number of turns

TS EN 14768 Cardboard barrels - Nominal capacity 5 l to 600 l - Barrel with closing lid (open lid)

TS EN 14798 Glass packaging - Hand-held bottle openers - Dimensions

TS EN 14848 Aerodol containers - Metal containers with aperture 25,4 mm - Dimensions of valve containers "

TS EN 14848 / AC Aerosol containers-Metal containers with 25,4 mm clearance-Dimensions of valve cups

TS EN 14849 Aerosol containers - Glass containers - Dimensions of aerosol valve heads

TS EN 14850 Aerosol containers - Metal containers with aperture 25,4 mm - Measuring contact height "

TS EN 14854 Aerosol containers - Glass containers - Bottle neck dimensions

TS EN 14867 Packaging - Plastic freezing bags - Technical specifications and test methods "

TS EN 14887 Glass packaging - Bottle cork removal tools - General rules

TS EN 14932 Plastics - Flexible thermoplastic films for wrapping packages - Specification and test methods

TS ISO 14968 Paper and cardboard - Office paper cut to size - Measuring the curl of the sheets in the package

TS EN 14979 Packaging - Flexible plastic / metal laminated tulle - Dimensions and tolerances for S 13 nozzle

TS ISO 15119: 2004 / T1 (Number amendment, TS EN ISO 15119) Packaging - Bags - Determination of friction coefficient of filled bags (modified 1)

TS EN 15385 Packaging - Bendable aluminum tubes - Test methods for determination of weldability of the head

TS EN 15386 Packaging - Flexible sheets and plastic tubes - Test method for determining letter adhesion

TS EN 15387: 2011 Packaging - Flexible laminated tubes - Test methods for testing the resistance of side flow

TS EN 15421 Packaging - Bendable aluminum tubes - Determination of adhesion of inner and outer protective varnish

TS EN 15433-2 Transport loads - Measuring and dynamic mechanical loads - Part 2: Assessment of data collection and general requirements to measure equipment

TS EN 15433-3 Transport loads - Measurement and dynamic-Mechanical loads - Part 3: Data validation analysis for data validation check and evaluation

TS EN 15433-4 Transport loads - Measurement and dynamic mechanical loads - Part 4: Data evaluation analysis

TS EN 15433-5 Transport loads - Measurement and dynamic-Mechanical loads - Part 5: Derivation evaluation of test specifications

TS EN 15519 Preparation of paper and cardboard-organic solvent extracts in contact with food

TS EN 15543 Glass packaging - Finishing elements for bottles - Threaded finishing elements for bottles for carbon-free liquids

TS EN 15552 Packaging - Fully loaded transport packages and unit loads - Performance test plan for common distribution chains

TS EN 15653 Packaging - Flexible aluminum tubes - Test method for checking the resistance of the internal protective coating to ammonia

TS EN 15696 Personal housing - Characteristics of personal housing services

TS EN 15766 Packaging - Flexible aluminum tubes - Test methods for determination of acetone polymerization of inner coating

TS EN ISO 16103 Packaging - Transport packaging of dangerous goods - Recycled plastic material "

TS EN ISO 16106 Packaging - Transport packages for dangerous goods - Hazardous commodity packages, medium bulk containers (ODK) and large packages - Guidance on the application of ISO 9001

TS EN 26590-2 Packaging - Bags - Terms and types of bags - Part 2: Bags made of thermoplastic flexible film

TS EN 26591-1 Packaging-Bags-Description and measurement method section 1: Empty paper bags

TS EN 26591-2 Packaging-Bags-Description and measurement method section 2-Empty bags made of thermoplastic flexible film

TS EN ISO 8318 Packaging - Filled transport packages and unit loads-Variable frequency sinusoidal vibration tests

TS EN 29008 Glass bottles-Verticality-Test method

TS EN 29009 Glass containers - Container height and deviation of the head from the parallelism to the base - Test methods

TS EN 60264-2-1 / A1 Packing of winding wires section 2: Cylindrical rollers section 1: Basic dimensions

TS EN 60264-3-5 Winding wires - Packaging - Part 3-5: Tapered distribution reels - Specification for reel containers made of thermoplastic material

TS EN 60264-5-1 Winding wires - Packaging - Part 5-1: Cylindrical distribution rollers with tapered flanges - Basic dimensions

TS EN 60264-3-4 Packing of winding wires section 3-4: Delivery rollers - Conical - Basic dimensions of containers for conical delivery rollers

TS EN 60264-5-1 / A1 Winding wires - Packaging - Part 5-1: Cylindrical distribution rollers with tapered flanges - Basic dimensions

TS EN 60286-1 Electronic circuit elements - Packaging for automatic machining - Part 1: Strip packaging of elements with wires in axial direction on continuously moving strips

TS EN 60286-5 Packaging of components for automated processes - part 5: Matrix trays

TS EN 60286-5 / A1 Packaging of components for automated processes - part 5: Matrix trays