As one of the largest and most experienced organizations in certification with more full-time inspection experts than any other certification body in the world, we provide testing, inspection, inspection and certification services in all standards listed below.
TS EN 310 Wood based boards - Determination of flexural strength and flexural modulus
TS EN 323 Wood based boards - Determination of unit weight
TS EN 324-1 Wood-based boards-Determination of board dimensions-Part 1: Determination of thickness, width and length
TS EN 324-2 Wood-based boards-Determination of board dimensions-Part 2: Determination of deflection and edge smoothness
TS EN 326-1 Wood-based boards-Sampling cutting and inspection section 1: Selection of test specimens, cutting and demonstration of test results
TS EN 382-1 Fiber plates, determination of surface absorption; Part 1: Test method for fiber boards produced by dry method
TS EN 390 Glued laminated timber - Dimensions - Acceptable deviations
TS EN 392 Glued laminated timber - Shear test of glued sheets
TS EN 633 Cemented particle boards - Description and classification
TS EN 1128 Cemented particleboard - Determination of impact strength
TS EN 635-5 Plywood - Classification by surface appearance - Part 5: Measurement of defects and properties
TS EN 635-5 Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing properties and defects
TS EN 12369-1 Wood-based panels - Characteristic values for structural design - Part 1: Osb, particle boards and fibreboards
TS EN 13017-2 Solid wood panels - Classification by surface appearance - Part 2: Hardwood
TS EN 13017-1 Solid wood panels - Classification by surface appearance - Part 1: Coniferous (soft) trees
TS EN 13017-2 Hardwood boards - Classification according to surface appearance - Part 2: Hardwood
TS EN 12369-1 Wood-based panels - Characteristic values for structural designs - Part 1: Particle boards and fibreboards
TS EN 13879 Wood-based boards - Determination of sidewall flexural properties
TS EN 13446 Wood-based panels - Determination of the bounce capacity of binders
TS EN 13879 Wood-based panels - Determination of bending properties on the sides (sword)
TS EN 13810-1 Wood-based panels - Flexible floors - Part 1: Performance characteristics
TS EN 387 Glued laminated timber - Wide wedge threaded joints - Performance and minimum production characteristics
TS EN 13017-1 Solid wood panels - Classification by surface appearance - Part 1: Softwood
TS EN 13810-1 Wood-based boards - Polished floors - Part 1: Performance characteristics
TS EN 311 Wood-based panels - Surface strength - Test method
TS EN 717-1 Wood-based boards - Determination of formaldehyde release - Part 1: Formaldehyde release by chamber method
TS EN 309 Particle boards - Description and classification
TS EN 14755 Molded particle boards-Features
TS EN 300 Oriented fiber boards (osb) - Definitions, classification and specifications
TS EN 14220 Wood and wood-based material in exterior windows, exterior door sashes and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based material in interior windows, interior door sashes and interior door frames - Requirements and features
TS EN 634-2 Cemented particle boards-Properties-Part 2: Properties of particleboard glued with pordland cement (pç) used in dry, humid and outdoor conditions
TS EN 15197 Wood-based boards-Linen fiber-Features
TS EN 15197 Wood based boards - Flax fiber boards - Specifications
TS EN 316 Fiberboard made of wood - Definitions, classification and symbols
TS EN 1058 Wood-based boards - Characteristic 5% lower limit values and determination of average characteristic values
TS EN 12369-3 Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
TS EN 13354 Solid wood panels (swp) - Adhesion quality - Test method
TS EN 14951 Interior and exterior solid wood veneers - Made of hardwood - Leaf profiled elements
TS EN 1058 Wood-based panels - Determination of characteristic values and characteristic average values of% 5
TS EN 12871 Wood-based panels - Determination of performance characteristics of load-bearing plates used in roof, wall and floor coverings
TS EN 312 Particleboards - Specifications
TS EN 12369-2 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
TS EN 320 Particleboard and fiberboard - Determination of screw holding strength
TS EN 14272 Plywood - Calculation method for some mechanical properties
TS EN 14272 Plywood - Calculation method for some mechanical properties
TS EN 325 Wood based boards - Determination of the dimensions of the test specimens
TS EN 1156 Wood based boards - Determination of loading time and creep factors
TS EN 14080 Wooden Structures - Glued laminated timber and glued solid wood
TS EN 12871 Wood based panels - Determination of performance characteristics of load bearing panels used in floors, walls and roofs
tst EN 325 Wood based panels - Determination of test piece dimensions
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 325 Wood based panels - Determination of test piece dimensions
TS EN 326-2: 2010 + A1 Wood and wood based panels - Sampling, cutting and inspection - Part 2: Initial type test and factory production control
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
tst EN 717-2 / AC Wood based boards - Determination of formaldehyde decomposition - Part 2: Formaldehyde decomposition by gas analysis method
tst EN 636: 2012 + A1 Plywood - Specifications
TS EN ISO 12460-5 Wood-based boards - Determination of formaldehyde release - Part 5: extraction method (called the perforator method)
TS EN ISO 12460-3 Wood-based boards - Determination of formaldehyde release - Part 3: Gas analysis method
TS EN ISO 12460-4 Wood-based boards - Determination of formaldehyde release - Part 4: Drying device method
TS EN 16718 Wood and wood based products - Total organic carbon (TOC) dosage in wood and wood based products
TS EN 16351 Wooden structures - Cross-layered wooden board - Requirements
EN 326-2: 2010 + A1: 2014 Wood and wood based panels - Sampling, cutting and inspection - Part 2: Initial type test and factory production control
TS EN ISO 12460-3 Wood-based boards - Determination of formaldehyde release - Part 3: Gas analysis method
TS EN ISO 12460-4 Wood-based boards - Determination of formaldehyde release - Part 4: Drying device method
TS EN ISO 12460-5 Wood-based boards - Determination of formaldehyde release - Part 5: extraction method (called the perforator method)
TS EN 14322 Wood-based panels - Melamine faced panels for indoor use - Definitions, requirements and classification
TS EN 14323 Wood-based panels - Melamine faced panels for indoor use - Test methods
TS 64-1 EN 622-1 Fiber boards - Specifications - Part 1: General specifications
TS 64-2 EN 622-2 Fiber boards - Specifications - part 2: Characteristics of rigid boards
TS 64-3 EN 622-3 Fiberboards - Specifications - Part 3: Properties of medium hard plates
TS EN 314-2 Plywood - Adhesion quality - Part 2: Specifications
TS EN 315 Plywood - Dimension tolerances
TS EN 317 Particleboard and fiberboard - Determination of swelling to thickness after dipping into water
TS EN 318 Wood-based panels - Determination of the change in dimensions due to relative humidity change
TS EN 319 Particleboard and fiberboard - Determination of tensile strength perpendicular to the surface of the panel
TS EN 321 Wood based boards - Determination of moisture resistance under repeated test conditions
TS EN 322 Wood-based boards-Determination of moisture content
TS EN 326-3 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a separated batch of boards
TS EN 382-2 Fiber boards - Determination of surface absorption - Part 2: Test method for hard fiber boards
TS EN 386 Glued laminated timber - performance characteristics and minimum manufacturing conditions
TS EN 391 Glued laminated timber - layers separation test from glue lines
TS EN 622-2 / AC Fiberboard - Specifications - Part 2: Specifications of hardboard
TS EN 622-5 Fiber boards - Specifications - Part 5: Requirements for dry-treated boards (MDF)
TS EN 622-4 Fiber boards - Specifications - Part 4: Requirements for soft boards
TS EN 634-1 Cemented particle boards - Specification - Part 1: General specifications
TS EN 634-2 Cemented particle boards - Specifications - Part 2: Characteristics of normal Portland cement (NPC) bonded particle boards used in dry, humid and outdoor conditions
TS 3106 EN 635-1 Plywood - Classification according to surface appearance section 1: General
TS EN 635-2 Plywood - Classification according to surface appearance - Part 2: Hardwood
TS EN 635-3 Plywood - Classification by surface appearance - Part 3: Softwood
TS EN 717-3 Wood-based boards - Determination of formaldehyde decomposition - Part 3: Formaldehyde decomposition by bottle method
TS EN 717-1 Wood-based boards - Determination of formaldehyde release - Part 1: Formaldehyde release by chamber method
TS EN 1087-1 Particleboard - Determination of moisture resistance - Part 1: Boiling test
TS EN 1194 Timber - Glued laminated timber - Strength classes and determination of characteristic values
TS EN 1328 Cemented particleboard - Determination of frost resistance
TS 2128 EN 313-2 Plywood - Classification and terms - Part 2: Terms
TS 3103 EN 313-1 Plywood-Classification and terms-Section 1: Classification
TS 3969 EN 314-1 Plywood veneer - Adhesion quality section 1: Test methods
TS EN 12369-2: 2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
TS EN 12775 Solid wood boards - Classification and terminology
TS EN 13353 + A1 Solid wood panels (swp) - Requirements
TS EN 13354 Solid wood panels (swp) - Adhesion quality - Test method
TS EN 14220 Wood and wood based materials used in exterior windows, exterior door casings and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based materials used in interior windows, interior door casings and interior door frames - Requirements and features
TS 4894 EN 120Awood based boards-Determination of formaldehyde content-Separation by extraction method
TS EN 310 Wood based boards - Determination of flexural strength and flexural modulus
TS EN 323 Wood based boards - Determination of unit weight
TS EN 324-1 Wood-based boards-Determination of board dimensions-Part 1: Determination of thickness, width and length
TS EN 324-2 Wood-based boards-Determination of board dimensions-Part 2: Determination of deflection and edge smoothness
TS EN 326-1 Wood-based boards-Sampling cutting and inspection section 1: Selection of test specimens, cutting and demonstration of test results
TS EN 12369-1 Wood-based panels - Characteristic values for structural designs - Part 1: Particle boards and fibreboards
TS EN 13879 Wood-based boards - Determination of sidewall flexural properties
TS EN 13446 Wood-based panels - Determination of the bounce capacity of binders
TS EN 13879 Wood-based panels - Determination of bending properties on the sides (sword)
TS EN 13810-1 Wood-based panels - Flexible floors - Part 1: Performance characteristics
TS EN 13017-1 Solid wood panels - Classification by surface appearance - Part 1: Softwood
TS EN 13810-1 Wood-based boards - Polished floors - Part 1: Performance characteristics
TS EN 717-1 Wood-based boards - Determination of formaldehyde release - Part 1: Formaldehyde release by chamber method
TS EN 14220 Wood and wood-based material in exterior windows, exterior door sashes and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based material in interior windows, interior door sashes and interior door frames - Requirements and features
TS EN 1058 Wood-based boards - Characteristic 5% lower limit values and determination of average characteristic values
TS EN 1058 Wood-based panels - Determination of characteristic values and characteristic average values of% 5
TS EN 12871 Wood-based panels - Determination of performance characteristics of load-bearing plates used in roof, wall and floor coverings
TS EN 325 Wood based boards - Determination of the dimensions of the test specimens
TS EN 1156 Wood based boards - Determination of loading time and creep factors
TS EN 12871 Wood based panels - Determination of performance characteristics of load bearing panels used in floors, walls and roofs
tst EN 325 Wood based panels - Determination of test piece dimensions
TS EN 325 Wood based panels - Determination of test piece dimensions
TS EN 326-2: 2010 + A1 Wood and wood based panels - Sampling, cutting and inspection - Part 2: Initial type test and factory production control
tst EN 717-2 / AC Wood based boards - Determination of formaldehyde decomposition - Part 2: Formaldehyde decomposition by gas analysis method
TS EN ISO 12460-5 Wood-based boards - Determination of formaldehyde release - Part 5: extraction method (called the perforator method)
TS EN ISO 12460-3 Wood-based boards - Determination of formaldehyde release - Part 3: Gas analysis method
TS EN ISO 12460-4 Wood-based boards - Determination of formaldehyde release - Part 4: Drying device method
TS EN 16718 Wood and wood based products - Total organic carbon (TOC) dosage in wood and wood based products
EN 326-2: 2010 + A1: 2014 Wood and wood based panels - Sampling, cutting and inspection - Part 2: Initial type test and factory production control
TS EN ISO 12460-3 Wood-based boards - Determination of formaldehyde release - Part 3: Gas analysis method
TS EN ISO 12460-4 Wood-based boards - Determination of formaldehyde release - Part 4: Drying device method
TS EN ISO 12460-5 Wood-based boards - Determination of formaldehyde release - Part 5: extraction method (called the perforator method)
TS EN 318 Wood-based panels - Determination of the change in dimensions due to relative humidity change
TS EN 321 Wood based boards - Determination of moisture resistance under repeated test conditions
TS EN 322 Wood-based boards-Determination of moisture content
TS EN 326-3 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a separated batch of boards
TS EN 717-1 Wood-based boards - Determination of formaldehyde release - Part 1: Formaldehyde release by chamber method
TS EN 14220 Wood and wood based materials used in exterior windows, exterior door casings and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based materials used in interior windows, interior door casings and interior door frames - Requirements and features
TS EN 390 Glued laminated timber - Dimensions - Acceptable deviations
TS EN 392 Glued laminated timber - Shear test of glued sheets
TS EN 13017-2 Solid wood panels - Classification by surface appearance - Part 2: Hardwood
TS EN 13017-1 Solid wood panels - Classification by surface appearance - Part 1: Coniferous (soft) trees
TS EN 13017-2 Hardwood boards - Classification according to surface appearance - Part 2: Hardwood
TS EN 387 Glued laminated timber - Wide wedge threaded joints - Performance and minimum production characteristics
TS EN 12369-3 Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
TS EN 12369-3 Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
TS EN 13354 Solid wood panels (swp) - Adhesion quality - Test method
TS EN 14951 Interior and exterior solid wood veneers - Made of hardwood - Leaf profiled elements
TS EN 14080 Wooden Structures - Glued laminated timber and glued solid wood
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 386 Glued laminated timber - performance characteristics and minimum manufacturing conditions
TS EN 391 Glued laminated timber - layers separation test from glue lines
TS EN 1194 Timber - Glued laminated timber - Strength classes and determination of characteristic values
TS EN 12369-2: 2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
TS EN 12775 Solid wood boards - Classification and terminology
TS EN 13353 + A1 Solid wood panels (swp) - Requirements
TS EN 13354 Solid wood panels (swp) - Adhesion quality - Test method