Turkey's leading testing, inspection companies to you as unique accuracy, highly experienced specialists, all of the tests below standard with advanced methods of investigation, audit, we provide inspection and certification.
TS EN 460 Durability of wood and wood-based material-Natural durability of solid wood-Durability rules for wood to be used in hazard classes
TS 4894 EN 120 Wood-based panels-Determination of formaldehyde content-Separation by extraction method
TS EN 310 Wood based boards - Determination of flexural strength and flexural modulus
TS EN 323 Wood based boards - Determination of unit weight
TS EN 324-1 Wood-based boards-Determination of board dimensions-Part 1: Determination of thickness, width and length
TS EN 324-2 Wood-based boards-Determination of board dimensions-Part 2: Determination of deflection and edge smoothness
TS EN 326-1 Wood-based boards-Sampling cutting and inspection section 1: Selection of test specimens, cutting and demonstration of test results
TS EN 382-1 Fiber plates, determination of surface absorption; Part 1: Test method for fiber boards produced by dry method
TS EN 390 Glued laminated timber - Dimensions - Acceptable deviations
TS EN 392 Glued laminated timber - Shear test of glued sheets
TS EN 633 Cemented particle boards - Description and classification
TS EN 844-1 Round and sawn wood (lumber) - Terms - Part 1: General terms for round and sawn wood
TS EN 1128 Cemented particleboard - Determination of impact strength
TS EN 844-2 Round and sawn wood (lumber) - Terms - Part 2: General terms for round wood
TS EN 844-4 Round and sawn wood (timber) terms - Part 4: Terms related to moisture content
TS EN 1310 Round and sawn wood (lumber) - Methods for measuring properties
TS EN 1316-3 Hardwood roundwood - Quality classification - Part 3: Ash and maple
TS EN 635-5 Plywood - Classification by surface appearance - Part 5: Measurement of defects and properties
TS EN 12105 Elastic floor coverings - Agglomerated fungus - Moisture determination
TS 6090 EN 12104 Elastic floor coverings - Cork floor tiles - Specifications
TS EN 635-5 Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing properties and defects
TS EN 12369-1 Wood-based panels - Characteristic values for structural design - Part 1: Osb, particle boards and fibreboards
TS EN 13017-2 Solid wood panels - Classification by surface appearance - Part 2: Hardwood
TS 7466 EN 1312Round and sawn wood (timber) - Determination of stack volume
TS EN 13017-1 Solid wood panels - Classification by surface appearance - Part 1: Coniferous (soft) trees
TS EN 13017-2 Hardwood boards - Classification according to surface appearance - Part 2: Hardwood28.11.2001
TS EN 12369-1 Wood-based panels - Characteristic values for structural designs - Part 1: Particle boards and fibreboards
TS EN 12781 Wall covering - Properties of cork boards
TS EN 13879 Wood-based boards - Determination of sidewall flexural properties
TS EN 13446 Wood-based panels - Determination of the bounce capacity of binders
TS EN 13879 Wood-based panels - Determination of bending properties on the sides (sword)
TS EN 13227 Wood flooring - Solid laminate flooring products
TS 200 EN 13488Awood flooring - Mosaic parquet elements
TS EN 13810-1 Wood-based panels - Flexible floors - Part 1: Performance characteristics
TS EN 387 Glued laminated timber - Wide wedge threaded joints - Performance and minimum production characteristics
TS 7614 ISO 2036 Wood-based marking symbols used in the manufacture of wooden flooring
TS 7332 EN 13085 Wall coverings - Characteristics of oak cork rolls
TS EN 13017-1 Solid wood panels - Classification by surface appearance - Part 1: Softwood
TS EN 13556 Round and sawn wood (timber) - European timber terms
TS EN 13810-1 Wood-based boards - Polished floors - Part 1: Performance characteristics
TS ENV 12038 Durability of wood and wood based products - Wood based boards - Test method for determination of resistance to basidiomycetes destroying wood material
TS EN 311 Wood-based panels - Surface strength - Test method
TS EN 14128 Durability of wood and wood based products - Performance criteria for biological wood preservatives as determined by biological experiments
TS EN 14251 Round building wood - Test method
TS EN 14354 Wood-based boards - Flooring with peeling board
TS EN 14374 Timber constructions - Layered structural veneer wood - Requirements
TS EN 13556 Round and sawn wood (timber) - Terminology of timber in Europe
TS EN 14251 Round wood - Structural purposes - Test methods
TS EN 1001-1 Durability of wood and wood-based products-Terminology-Part 1: List of equivalent terms
TS EN 1001-2 Durability of wood and wood-based products-Terminology-Part 2: Glossary
TS EN 13183-3 Moisture content of a piece of timber - Part 3: Determination by capacity method
TS ENV 12038 Durability of wood and wood-based products - Wood-based boards - Test method for determination of resistance to basidiomycetes destroying wood
TS EN 717-1 Wood-based boards - Determination of formaldehyde release - Part 1: Formaldehyde release by chamber method
TS EN 309 Particle boards - Description and classification
TS EN 14755 Molded particle boards-Features
TS EN 13183-2 / AC Moisture content of lumber - Part 2: Estimation by electric resistance method
TS EN 14519 Inner and outer veneer made of solid softwood - Machine profiled lamp and mortise -
TS EN 14762 Tile flooring - Sampling procedures for evaluation of conformity
TS EN 1309-2 Round and sawn wood (lumber) - Method of measuring dimensions - Part 2: Round wood - Requirements for measuring and volume calculation rules
TS EN 14951 Interior and exterior veneer made of solid softwood - Machine-shaped elements
TS EN 300 Oriented fiber boards (osb) - Definitions, classification and specifications
TS EN 13307-1 Semi-profiled and untreated timber for non-structural uses - Part 1: Requirements
TS EN 14220 Wood and wood-based material in exterior windows, exterior door sashes and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based material in interior windows, interior door sashes and interior door frames - Requirements and features
TS EN 14354 / AC Wood-based panels - Flooring with peeling board 27.03.2007 79.080
TS EN 634-2 Cemented particle boards-Properties-Part 2: Properties of particleboard glued with pordland cement (pç) used in dry, humid and outdoor conditions
TS EN 15197 Wood-based boards-Linen fiber-Features
TS EN 942 Joinery timber - General requirements
TS EN 1001-1 Durability of wood and wood-based products - Terminology - Part 1: List of synonyms
TS EN 13183-1 Moisture content of sawn lumber - part 1: Determination by oven drying
TS EN 13183-2 Moisture content of sawn lumber - Part 2: Estimation by electric resistance method
TS EN 14081-2 Timber structures - Rectangular structural timber with cross-section of strength classification - Part 2: Classification by machine; Additional requirements for initial type testing
TS EN 15197 Wood based boards - Flax fiber boards - Specifications
TS EN 942 Joinery timber - General classification of timber quality
TS EN 12369-3 Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
TS EN 15146 Interior and exterior solid wood veneers - Coniferous (soft) wood - Machine-free profiles and mortise-free profiles
TS EN 1927-1 Quality classification of coniferous round wood - Part 1: Spruce and fir
TS EN 1927-2 Quality classification of coniferous (soft) roundwood - Part 2: Pine
TS EN 1927-3 Quality classification of coniferous (soft) roundwood - Part 3: Hybrids and firewood
TS EN 1927-1 Quality limitation of softwood (coniferous) round - Part 1: Spruce and fir
TS EN 14761 + A1 Flooring flooring - Solid wood flooring - Vertical joining, wide joining and brick version
TS EN 316 Fiberboard made of wood - Definitions, classification and symbols
TS EN 13226 Wood flooring - Solid parquet elements with lamp and / or bevel
TS EN 1058 Wood-based boards - Characteristic 5% lower limit values and determination of average characteristic values
TS EN 1218-5 + A1 Safety on woodworking machines - Mortising machines - Part 5: Single side profiling machines with chain feed or fixed table - Reel feed
TS EN 351-1 Durability of wood and wood-based products - Impregnated solid wood - Part 1: Depth of penetration and classification of impregnation
TS EN 12369-3 Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
TS EN 13354 Solid wood panels (swp) - Adhesion quality - Test method
TS EN 1927-2 / AC Quality limitation of coniferous (soft) round wood - Part 2: Pine
TS EN 1315 Dimensional classification of round wood
TS EN 1313-1 Roundwood and sawn wood (lumber) - Acceptable deviations and preferred sizes - Part 1: Coniferous (soft) lumber
TS EN 14951 Interior and exterior solid wood veneers - Made of hardwood - Leaf profiled elements
TS EN 1058 Wood-based panels - Determination of characteristic values and characteristic average values of% 5
TS EN 1315 Size classification - Wood
TS EN 12871 Wood-based panels - Determination of performance characteristics of load-bearing plates used in roof, wall and floor coverings
TS EN 975-1 Sawn timber - Classification of leafy (hard) wood by appearance characteristics - Part 1: Oak and beech
TS ISO 1997 Granulated oak cork and oak cork powder - Classification, specifications and packaging
TS ISO 3869 Composite anglomera mushroom (composite cork) - Used as filler material in expansion joints in buildings and buildings - Descriptive properties, packaging and marking
TS ISO 3810 Agglomerated oak cork flooring - Test methods
TS ISO 633 Cork oak cork - Terms recipes
TS ISO 2386 Mushroom wood, untreated fungus, rotten fungus, harvest residue, defective mushroom and residual fungus - Determination of moisture content
TS ISO 3867 Combined anglomerate fungus (composite fungus) - Expansion joint filler materials - Test methods
TS ISO 2385 Mushroom wood in plank, untreated mushroom, harvested mushroom, mushroom parts, finished mushroom waste and residual mushroom - Sampling for determination of moisture content
TS ISO 2030 Granulated oak cork - Size analysis by mechanical means
TS EN 1870-6 + A1 Safety in woodworking machines - Circular sawing machines - Part 6: Circular sawing machines and two-purpose circular sawing machines and circular sawing machines for manual loading and / or unloading of firewood
TS EN 312 Particleboards - Specifications
TS EN 1534 Wood floor coverings - Determination of resistance to damage - Test method
TS EN 312 Particleboards - Specifications
TS EN 1534 Wood floor coverings - Determination of resistance to damage - Test method
TS EN 1870-14 + A2 Safety in woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
TS EN 1870-11 Safety on woodworking machines - Circular sawing machines - Part 11: Semi-automatic sawing machines with a sawing unit that transversely cut horizontally (radial arm saws)
TS EN 1870-13 + A2 Safety in woodworking machines - Circular sawing machines - Part 13: Panel sawing machines with horizontal columns
TS EN 1870-6 + A1 Safety in woodworking machines - Circular sawing machines - Part 6: Circular sawing machines, two-function circular sawing machines and circular sawing machines for manual loading and / or unloading of firewood
tst ISO 7322 Mushroom based materials - Test methods
TS EN 13647 Wood flooring and interior and exterior wood coatings - Determination of geometric properties
TS EN 13228 Wood flooring - Solid timber flooring elements, including parquets
TS EN 12369-2 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
TS EN 320 Particleboard and fiberboard - Determination of screw holding strength
TS EN 14229 Timber - Wood poles for aerial lines
TS EN 13227 / tst AC Wood flooring - Solid laminate flooring products
TS EN 13647 Wood and parquet flooring and interior and exterior wood coatings - Determination of geometric properties
TS 700 EN 13145 + A1 Railway applications - Railway - Wooden sleepers and supports
TS EN 13145: 2001 + A1 Railway applications - Railway - Wooden sleepers and supports
TS EN 14272 Plywood - Calculation method for some mechanical properties
TS EN 940 + A1 Safety of woodworking machines - Combined woodworking machines
TS EN 14272 Plywood - Calculation method for some mechanical properties
TS EN 14081-3 Timber structures - Rectangular structural timber with cross-section of strength classification - Part 3: Classification by machine; Additional requirements for manufacturing control at the factory
TS EN 325 Wood based boards - Determination of the dimensions of the test specimens
TS EN 1870-4 Safety in woodworking machines - Circular sawing machines - Part 4: Multi-blade slitting saws with manual loading and / or unloading
TS EN 1870-13 + A2 Safety in woodworking machines - Circular sawing machines - Part 13: Horizontal column panel saw
TS EN 1870-14 + A2 Safety in woodworking machines - Circular sawing machines part 14: Vertical panel saw
TS EN 1912 Timber - Strength classes - Classification according to appearance and wood species
TS EN 13629 Wood flooring - Prefabricated solid hardwood boards
TS EN 1912 Timber - Strength classes - Classification of wood species and visual classes
TS EN 13629 Wood flooring - Single and pre-assembled solid hardwood boards
TS EN ISO 1974 Paper - Determination of tear strength - Elmendorf method
TS EN 1218-1 + A1Security in woodworking machines-Tenoning machines-Part 1: Sliding table mortising machines with one end
TS EN 1870-5 + A2Security in woodworking machines - Circular sawing machines - Part 5: Circular sawing machines / upward transverse sawing machines
TS EN 848-3 Safety in woodworking machines- Machines with one face-shaped rotary cutter - Part 3: Numerically controlled drilling and mortising machines
TS EN 691-1 Safety on woodworking machines - Part 1: General requirements
TS EN 1316-1: 2012 Hardwood (round) wood - Quality classification - Part 1: Oak and beech
TS EN 1316-2: 2012 Hardwood (roundwood) - Quality classification- Part 2: Poplar
TS EN 1870-7 Safety of woodworking machines-Circular sawing machines part 7: Single blade billet sawing machines with integrated feed table and manual loading and / or unloading
TS EN 1870-15 Safety in woodworking machines - Circular sawing machines - Part 15: Multi-blade parallel cutting saws with integrated workpiece feed and manual loading and / or unloading
TS EN 1870-16 Safety in woodworking machines - Circular sawing machines - Part 16: Double-blade sawing machines for V-shaped cutting
TS EN 848-1 + A2 Safety of Woodworking Machines-One Face Milling Machines with Rotary Cutter Tool-Part 1: Vertical Milling Machines with a Spindle
TS EN 848-2 + A2 Safety in woodworking machines - Machines with one face-shaped rotary cutter - Part 2: Single spindle mortising machines with manual feed / integrated feed
TS EN 1870-5 + A2Safety-Circular Cutting Machines in Woodworking Machines-Part 5: Circular Cutting Machine / Crosscut Saws
TS EN 1870-9: 2012 (EN) Safety on woodworking machines - Circular sawing machines - Part 9: Circular sawing machines with two feed saws with integrated feed and manual loading and / or unloading
TS EN 13629 / tst AC Wood flooring - Prefabricated solid hardwood boards
TS EN 1870-8 Safety on woodworking machines - Circular sawing machines - Part 8: Edge-slitting machines with power-driven single-blade saw units with manual loading and / or unloading
TS EN 14081-2: 2010 + A1 Wood structures - Rectangular cross-section structural timber with strength classification - Part 2: Machine classification; Additional requirements for initial type testing
TS EN 859 + A2 Safety of woodworking machines - Hand-fed planers
TS EN 860: 2007 + A2 Safety of woodworking machines - One-sided thickness planers
TS EN 861: 2007 + A2: 2012Safety of woodworking machines - Surface planer and thickness planer
TS EN 12750: 2013 Safety in woodworking machines - Four-sided profiling machines
TS EN 1807-1: 2013 Safety in woodworking machines - Bandsaw machines - Part 1: Repetition Bandsaw machines and Bandsaw machines table
TS EN 1807-2: 2013 Safety of woodworking machines - Band saws - Part 2: Billet cutting machines
TS EN 1870-18: 2013 Safety in woodworking machines - Circular sawing machines - Part 18: Sizing saws
TS EN 13442: 2013 Wood and parquet flooring and internal and external wood coatings - Determination of resistance to chemicals
TS EN 13442: 2013 Wood and parquet flooring and internal and external wood coatings - Determination of resistance to chemicals
TS EN 1156 Wood based boards - Determination of loading time and creep factors
TS EN 1870-10 Safety in woodworking machines - Circular sawing machines - Part 10: Single-blade automatic and semi-automatic upward transverse sawing machines
TS EN 14080 Wooden Structures - Glued laminated timber and glued solid wood
TS EN 12871 Wood based panels - Determination of performance characteristics of load bearing panels used in floors, walls and roofs
tst EN 325 Wood based panels - Determination of test piece dimensions
TS EN 336 Timber - Dimensions, permissible deviations
TS EN 14915 Interior and exterior solid wood veneers - Characteristics, evaluation of conformity and marking
TS EN 847-1 Cutting tools for woodworking - Safety regulations - Part 1: Milling tools, circular saw blades
TS EN 1870-19 Safety in woodworking machines - Circular sawing machines - Part 19 Circular saw benches (with or without sliding tables) and building site saws
TS EN 847-2 Cutting tools for woodworking - Safety rules - Part 2: Rules for the shanks of milling tools mounted on the machine shank
TS EN 847-2 Cutting tools for woodworking - Safety rules - Part 2: Rules for the shanks of milling tools mounted on the machine shank
TS EN 847-3 Woodworking machines - Safety requirements, part 3: Clamping devices
TS EN 847-3 Woodworking machines - Safety requirements, part 3: Clamping devices
TS EN 1870-11 Safety in woodworking machines-Circular sawing machines-Part11: Single blade, automatic and semi-automatic, horizontal cross-cutting sawing machines (radial arm saws)
TS EN 1870-12 Safety in woodworking machines - Circular sawing machines - Part 12: Pendulum type crosscut saws
TS EN 1912 / AC Timber - Strength classes - Classification according to appearance and wood species
TS EN 15534-1 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC)) - Part 1: Test methods for the characteristics of the product and its components
TS EN 15534-4 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC)) - Part 4: Specifications for deck profiles and tiles
TS EN 15534-5 Composites made of cellulose-based material and thermoplastics (commonly known as wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 5: Specifications for coating profiles and tiles
TS EN 13226 Wood flooring - Solid parquet elements with lamp and / or bevel
TS EN 16449 Wood and wood based products - Calculation of biogenic carbon content and conversion of wood to carbon dioxide
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 325 Wood based panels - Determination of test piece dimensions
TS EN 13228 / tst AC Wood flooring - Solid timber flooring elements, including parquets
TS EN 15497 Solid wood assembled with wedge teeth - Performance requirements and minimum manufacturing requirements30.10.2014
TS EN 326-2: 2010 + A1 Wood and wood based panels - Sampling, cutting and inspection - Part 2: Initial type test and factory production control
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 1218-2 + A1Safety in woodworking machines -Punching machines-Part 2: Double-sided tenon and / or profiling machines with chain feed
TS EN ISO 660-1 / tst A1 Elastic floor coverings - Determination of abrasion resistance - Part 1: Stuttgard test
TS EN 16449 Wood and wood based products - Calculation of biogenic carbon content and conversion of wood to carbon dioxide
tst EN 15534-5 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC)) - Part 5: Specifications for coating profiles and tiles
tst EN 717-2 / AC Wood based boards - Determination of formaldehyde decomposition - Part 2: Formaldehyde decomposition by gas analysis method
tst EN 336 Timber - Dimensions, permissible deviations
TS EN 14915 Interior and exterior solid wood veneers - Characteristics, evaluation of conformity and marking
TS EN 1870-3 Safety in woodworking machines - Circular sawing machines -
tst EN 336 Timber - Dimensions, permissible deviations
TS EN 14915 Interior and exterior solid wood veneers - Characteristics, evaluation of conformity and marking
TS EN 1870-3 Safety in woodworking machines - Circular sawing machines -
TS ISO 24294 Wood- Roundwood and timber- Terms and recipes
TS EN 1870-17 + A1 The safety of woodworking machines part 17: Sawing machines that cut a sawing unit horizontally by hand-operated radial arm saws
TS ISO 10718 Mushroom plugs - Counting colony forming units of mold, yeast and bacteria that can be extracted and reproduced in alcoholic environment and properties of low germ plugs
tst EN 636: 2012 + A1 Plywood - Specifications
TS EN 14342 Wood floor coverings - Characteristics, assessment of conformity and marking
TS EN 14081-1 Wooden structures-Strength classification of rectangular sawn timber-Part 1: General characteristics
TS EN 15534-6 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC)) - Part 6: Specification for fence profiles and elements
TS EN ISO 12460-5 Wood-based boards - Determination of formaldehyde release - Part 5: extraction method (called the perforator method)
TS EN ISO 12460-3 Wood-based boards - Determination of formaldehyde release - Part 3: Gas analysis method
TS EN ISO 12460-4 Wood-based boards - Determination of formaldehyde release - Part 4: Drying device method
TS EN 16718 Wood and wood based products - Total organic carbon (TOC) dosage in wood and wood based products
TS EN 16351 Wooden structures - Cross-layered wooden board - Requirements
TS ISO 3869 Composite anglomera mushroom (composite cork) - Used as filler material in expansion joints in buildings and buildings - Descriptive properties, packaging and marking
TS EN ISO 18217Awoodworking machines Safety - edge-fed edge banding machines
TS EN 12779 Safety in woodworking machines - Fixed chip and dust removal systems - Performance and safety rules
TS ISO 3867 Combined anglomerate fungus (composite fungus) - Expansion joint filler materials - Test methods
tst EN ISO 18217 Woodworking machines Safety - edge-fed edge banding machines
tst EN 12779 Safety in woodworking machines - Fixed chip and dust removal systems - Performance and safety requirements
TS EN 1910 Wood and parquet flooring and interior and exterior wood coatings - Determination of dimensional stability
TS EN 16737 Timber - The appearance strength classification of tropical hardwood
TS EN 14358 Wooden structures - Calculation of characteristic values and acceptance criteria
TS EN 50632-3-1Electric motor-driven tools - Dust measurement - Part 3-1: Specific requirements for portable table saws
TS EN 384 Timber - Determination of characteristic values of density and mechanical properties
TS EN 350 Durability of wood and wood based products - Testing and classification of the resistance of wood and wood based materials to biological agents (pests)
TS EN 50632-3-9 Electric motor-powered tools - Dust measurement - Part 3-9: Specific requirements for portable miter saws
TS EN ISO 12460-3 Wood-based boards - Determination of formaldehyde release - Part 3: Gas analysis method
TS EN ISO 12460-4 Wood-based boards - Determination of formaldehyde release - Part 4: Drying device method
TS EN ISO 12460-5 Wood-based boards - Determination of formaldehyde release - Part 5: extraction method (called the perforator method)
TS EN 50632-3-3Electric motor-driven tools - Dust measurement - Part 3-3: Portable planers and thickeners
TS EN 14322 Wood-based panels - Melamine faced panels for indoor use - Definitions, requirements and classification
TS EN 14323 Wood-based panels - Melamine faced panels for indoor use - Test methods
TS 64-1 EN 622-1 Fiber boards - Specifications - Part 1: General specifications
TS 64-2 EN 622-2 Fiber boards - Specifications - part 2: Characteristics of rigid boards
TS 64-3 EN 622-3 Fiberboards - Specifications - Part 3: Properties of medium hard plates
TS EN 314-2 Plywood - Adhesion quality - Part 2: Specifications
TS EN 315 Plywood - Dimension tolerances
TS EN 317 Particleboard and fiberboard - Determination of swelling to thickness after dipping into water
TS EN 318 Wood-based panels - Determination of the change in dimensions due to relative humidity change
TS EN 319 Particleboard and fiberboard - Determination of tensile strength perpendicular to the surface of the panel
TS EN 321 Wood based boards - Determination of moisture resistance under repeated test conditions
TS EN 322 Wood-based boards-Determination of moisture content
TS EN 326-3 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a separated batch of boards
TS EN 335-1 Durability of wood and wood-based products - Definition of use classes - Part 1: General
TS EN 382-2 Fiber boards - Determination of surface absorption - Part 2: Test method for hard fiber boards
TS EN 385 Wedge-joint construction timber - performance characteristics and minimum manufacturing conditions
TS EN 386 Glued laminated timber - performance characteristics and minimum manufacturing conditions
TS EN 391 Glued laminated timber - layers separation test from glue lines
TS EN 622-2 / AC Fiberboard - Specifications - Part 2: Specifications of hardboard
TS EN 622-5 Fiber boards - Specifications - Part 5: Requirements for dry-treated boards (MDF)
TS EN 622-4 Fiber boards - Specifications - Part 4: Requirements for soft boards
TS EN 634-1 Cemented particle boards - Specification - Part 1: General specifications
TS EN 634-2 Cemented particle boards - Specifications - Part 2: Characteristics of normal Portland cement (NPC) bonded particle boards used in dry, humid and outdoor conditions
TS 3106 EN 635-1 Plywood - Classification according to surface appearance section 1: General
TS EN 635-2 Plywood - Classification according to surface appearance - Part 2: Hardwood
TS EN 635-3 Plywood - Classification by surface appearance - Part 3: Softwood
TS EN 672 Elastic floor coverings - Determination of apparent density of agromeral mushrooms
TS EN 717-3 Wood-based boards - Determination of formaldehyde decomposition - Part 3: Formaldehyde decomposition by bottle method
TS EN 717-1 Wood-based boards - Determination of formaldehyde release - Part 1: Formaldehyde release by chamber method
TS EN 789 Wood structures - Test methods - Determination of mechanical properties of wood based panels
TS EN 844-3 Round and sawn wood (lumber) - Terms - Part 3: General terms for sawn wood (lumber)
TS EN 844-5 Round and sawn wood (timber) - Terms-Part 5: Terms related to the dimensions of round wood
TS EN 844-6 Round and sawn wood (lumber) - Terms - Part 6: Terms related to timber dimensions
TS EN 844-7 Round and sawn wood (lumber) - Terms - Section 7: Terms related to the anatomical structure of wood
TS EN 844-8 Round and sawn wood (lumber) - Terms - Part 8: Terms relating to the characteristics of round wood
TS EN 844-9 Round and sawn wood - Terms - Part 9: Terms relating to the properties of sawn wood
TS EN 844-10 Round and sawn wood (lumber) - Terms - Part 10: Terms relating to coloring and fungal damage
TS EN 844-11 Round and sawn wood (lumber) - Terms - Part 11: Terms related to insect damage
TS EN 844-3 / T1 Round and sawn wood (lumber) - Terms - Part 3: General terms related to sawn wood (lumber) amended 1
TS EN 844-12 Round and sawn wood (timber) -Terminology-Part 12: Additional terms and general index
TS EN 860 + A1 Safety of woodworking machines - One-sided thickness planers
TS EN 861 / AC Safety of woodworking machines - Surface planer and thickness planer
TS 1249 EN 975-2 Sawn timber (lumber) - Classification of appearance of hard wood - Part 2: Poplar
TS EN 975-1 Sawn timber (lumber) - Classification of appearance of hardwood firewood - Part 1: Oak and beech
TS EN 1001-2 Durability of wood and wood-based products - Terminology - Part 2: Glossary of terms
TS EN 1087-1 Particleboard - Determination of moisture resistance - Part 1: Boiling test
TS EN 1194 Timber - Glued laminated timber - Strength classes and determination of characteristic values
TS EN 1218-2 + A1Safety in woodworking machines -Punching machines-Part 2: Double-sided tenon and / or profiling machines with chain feed
TS EN 1218-1 + A1Security in woodworking machines-Tenoning machines-Part 1: Sliding table mortising machines with one end
TS EN 1218-3 + A1 Safety in woodworking machines - Mortising machines - Part 3: Sliding table hand-fed mortising machines for cutting timber
TS EN 1309-1 Round and sawn wood (lumber) - Method of measuring dimensions - Part 1: Sawn wood (lumber)
TS EN 1309-2 Round and sawn wood (lumber) - Method of measuring dimensions - Part 2: Round wood - Requirements for measurement and volume calculation rules
TS EN 1311 Round and sawn wood (lumber) - Methods for measuring biological damage
TS EN 1313-2 Round and sawn wood (lumber) - Permissible deviations and preferred sizes - Part 2: Hard (leafy) sawn wood (lumber)
TS EN 1328 Cemented particleboard - Determination of frost resistance
TS EN 1438 Symbols for timber and wood based products
TS EN 1611-1 Sawn timber - Classification of coniferous (soft) firewood according to their appearance - Part 1: European spruce, fir, pine and firewood
TS EN 1611-1 / A1 Sawn timber - Classification of coniferous (soft) wood by appearance - Part 1: European spruce, fir, pine and firewood
TS EN 1974 + A1 Food processing machines - Slicing machines - Safety and hygiene rules
TS 2128 EN 313-2 Plywood - Classification and terms - Part 2: Terms
TS 5204 EN 13756 Wooden flooring - Termology
TS ISO 7009 Woodworking machines - Single spindle milling machine - Naming and acceptance requirements
TS ISO 7571 Woodworking machines - Planing machine with one side knife spindle - Naming and acceptance requirements
TS ISO 7760 Photobath wastes-Determination of hydroquinone content-Spectrophotometric method
TS ISO 7960 Airborne noise emitted by machine tools - Operating conditions for woodworking machines
TS ISO 9566 Woodworking machines - Multi-spindle mortising machines
TS EN 12103 Elastic floor coverings - Agglomerated cushion supports
TS EN 12246 Quality grades of sawn timber for use in packaging and pallets
TS EN 12248 Sawn timber for industrial packaging - Permissible deviations and preferred dimensions
TS EN 12249 Sawn timber for pallets - Guide for permissible deviations and dimensions
TS EN 12369-2: 2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
TS EN 12775 Solid wood boards - Classification and terminology
TS EN 12781 Wall coverings - Required properties of oak cork boards
TS EN 13183-3 Moisture content of sawn lumber - Part 3: Estimation by capacitance method
TS EN 13228: 2011 Wood flooring - Solid timber flooring elements, including parquets
TS EN 13307-1 Timber beams and semi-finished profiles for non-structural uses - Part 1: Requirements
TS EN 13353 + A1 Solid wood panels (swp) - Requirements
TS EN 13354 Solid wood panels (swp) - Adhesion quality - Test method
TS EN 13489 Wood flooring - Multi-layer parquet elements
TS EN 13696 Wood flooring - Test methods for determination of abrasion flexibility and impact and impact strength
TS 11970 EN 13990 Wood flooring - Solid softwood flooring panels
EN 13990 Wood flooring - Solid softwood flooring panels
TS EN 14128 Durability of wood and wood-based products - Performance criteria determined by biological tests for therapeutic wood preservatives
TS EN 14220 Wood and wood based materials used in exterior windows, exterior door casings and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based materials used in interior windows, interior door casings and interior door frames - Requirements and features
TS EN 14279 + A1 Peeling laminated timber (lvl) - Definitions, classification and specifications
TS EN 14298 Sawn timber (lumber) - Evaluation of drying quality
TS EN 14354 Wood-based boards-Plywood flooring
TS EN 14374 Timber constructions - Structural laminated timber with peeling layer - Requirements
TS EN 14519 Interior and exterior solid wood veneers - Coniferous (soft) wood - Machine-driven lamp and mortise profiles
TS EN 14755 Molded particle boards - Specifications
TS EN 14761 + A1 Wooden flooring - Solid wood parquet - Vertical parquet, large parquet and brick-shaped parquets
TS EN 14762 Wood flooring - Sampling for conformity assessment
TS EN 15228 Building timber - Building timber impregnated with wood preservative against biological damage
TS EN 975-1 / AC Sawn wood (lumber) - Classification of appearance of hardwood firewood - Part 1: Oak and beech
TS EN 1001-2The durability of wood and wood-based products-Terminology-Part 2: Glossary
TS EN 1001-2 Durability of wood and wood-based products - Terminology - Part 2: Glossary of terms