With its strong infrastructure, our company conducts the tests, audits, inspections and certification of all the standards mentioned in the below section with respect to Chemical Analysis.
TS 2425 Determination of the amount of tungsten chemical analysis methods of iron and steel
TS ISO 4552-2 Ferro alloys - Sampling and sample preparation for chemical analyzes-Ferrotiton, ferromolybdenum, ferrovolfram, feronryobium, ferrovanadium.
TS ISO 4552-1 Ferro alloys - Sampling and sample preparation for chemical analysis, ferrochromium, ferrosiliconochrome, ferrosilicon, ferrosilicon
TS EN 61207-3 Gas analyzers-Performance demonstration-Section 3: Paramagnetic oxygen analyzers
TS EN 60746-1 Performance of electrochemical analyzers - Section 1: General
TS EN 60746-2 Performance of electrochemical analyzers - Section 2: Ph value
TS EN 60746-3 Performance of electrochemical analyzers - Part 3: Electrolytic conductivity
TS EN 12698-2 Chemical analysis of nitrite-bound cislium carbide refractories - Part 2: XRD methods
TS EN 61207-1 Demonstration of performance of gas analyzes - Part 1: General
Gas analysis - preparation of calibration gas mixtures using dynamic volumetric methods - Part 6145: Saturation method
Gas analysis - preparation of calibration gas mixtures using dynamic volumetric methods - Part 6145: Thermal mass flow control devices
TS EN 15969-2 Tanks for the transport of dangerous goods - The digital interface of the data flow between the station and the vehicle tank - Section 2: Commercial and logistic data
TS 8259 Liquid and solids - Determination of the reaction threshold temperatures
TS EN 10071 Chemical analysis methods of iron-based materials-Determination of manganese in steel and iron-electrometric titration method
TS EN 16280: 2012 (EN) Alcohol blow tester for general use - Properties and test methods
Chemical analysis of refractories containing alumina, zirconia and silicon dioxide - Refractories containing 21079-3 zro (index 5) - Part 45: Flame atomic absorption spectrophotometry (faas) and inductive mapped plasma emission spectrometry (βp-Aes) method
Performance statement of gas analyzers TS EN 61207-7 - Part 7: Tunable semiconductor laser gas analyzers
TSE CEN / TS 16640 Bio-based products - determination of bio-based carbon content of products by radio-carbon method
Alcohol interlocks - Test methods and performance guidelines - Part 50436: Devices for alcoholic driving deterrent programs - Part 1-1
Alcohol interlocks - Test methods and performance guidelines - Section 50436: Devices for general protective use
TS EN 61207-6 Gas analysis performance Statement - Part 6: Photometric analysis
Alcohol interlocks - Test methods and performance guidelines - Section 50436: Devices with a nozzle for general precautions and for breathing in alcohol
TS EN 50436-6 Alcohol interlocks - Test methods and performance guidelines - Part 6: Data security
TS EN ISO 6141 Gas analysis - Calibration gas mixture certificates contents
TS ISO 15472 Chemical analysis of surfaces - X-ray photoelectron spectrometers - Calibration of energy scales
TS EN 15969-1 Tanks for the transport of dangerous goods - The digital interface of the data flow between the station and the vehicle tank - Section 1: Protocol features - Control, measurement and status data
Biological products - Biological origin content - Part 16785: Determination of biological origin product content by radiocarbon analysis and elemental analysis
Gas analysis - Preparation of calibration gas mixtures - Part 6142: Gravimetric method for class I mixtures
XIUMX-50436 / AC Alcohol interlocks - Test methods and performance rules - Part 1: Devices for alcoholic driving deterrent programs
Alcohol interlocks - Test methods and performance guidelines - Section 50436: Guidelines for authorities, decision-makers, buyers and users
TS EN 50436-7 Alcohol interlocks - Test methods and performance rules - Section 7: Installation document
TS EN 61207-7 / AC Performance statement of gas analyzers - Part 7: Tunable semiconductor laser gas analyzers
Biological based carbon content - Determination of biocompatible carbon content by using radiocarbon method
TS ISO 78-2 Chemistry - Text layout for standards - Part 2: Chemical analysis methods
TS ISO 78-3 Chemistry - Text layout for standards - Section 3: Standard for molecular absorption spectrometry
TS ISO 78-4 Text layout for standards - Part 4: Standard for atomic absorption spectrometric analysis
TS EN 15964: 2011 Alcohol testers with single breathable breath - Features and test methods
TS ISO 549 Manganese ore - Determination of bound water content - Gravimetric method
TS ISO 760 Water determination - Karl fischer method (general method)
TS 1463 General method for the determination of arsenic Silver diethyldithiocarbamate photometric method
Steel and iron-chromium determination-Potentiometric method or titration method
TS 2223 Determination of copper, beryllium, nickel, cobalt and iron content of copper - beryllium alloys
Chemical analysis methods of copper alloys, copper, chromium, copper, chromium, silicon and iron
TS 2346 Determination of tin by chemical analysis methods of iron and steel
TS 2414 Determination of titanium content of iron and steel
S 2426 Chemical analysis methods of iron and steel ferro - Titanium titanium, aluminum, silicon and carbon content determination
TS 2427 Arsenic determination of iron and steel chemical analysis methods
TS 2428 Determination of nitrogen amount of iron and steel chemical analysis methods
TS 2520 Determination of the amount of vanadium in chemical analysis methods of iron and steel
TS 2521 Determination of ferrous and chromium chromium, carbon and silicon quantities
TS 2591 Determination of silicon in iron and steel
TS 2719 Determination of iron and steel chemical analysis methods tantalum
TS 2840 Determination of 80 grade weight loss in industrial sulfur
TS 4163 Chemical substances used in industry - Sampling and preparation techniques - Solid chemical products in powder, granules or coarse pellets
TS 4946 Template for standards for chemical analysis methods by gas chromatography
TS EN ISO 6145-10 Gas analysis - Preparation of calibration gas mixture using dynamic volumetric methods - Part 10: Interference method
TS EN ISO 6145-11 Gas analysis - Preparation of calibration gas mixture using dynamic volumetric methods - Part 11: Electrochemical generation
TS EN ISO 6145-1 Gas analysis - Preparation of calibration gas mixture using dynamic volumetric methods - Part 1: Calibration methods
TS EN ISO 6145-4 Gas analysis - Preparation of calibration gas mixture using dynamic volumetric methods - Part 4: Continuous injection method
TS EN ISO 6145-6 Gas analysis - Preparation of calibration gas mixture using dynamic volumetric methods - Part 6: Critical orifices
TS EN ISO 6145-8 Gas analysis - Preparation of calibration gas mixture using dynamic volumetric methods - Part 8: Diffusion method
TS 6522 Determination of solubility of non-reactive gases in low boiling liquids
TS 6524 Butylene analysis-Gas chromatography method
TS 6551 Chemical products used in industry - General determination of trace amounts of sulfur compounds in terms of sulphates - Titrimetric method after reduction
TS 7142 General method for the determination of silicon content-Spectrophotometric method with reduced molybdosilicate
TS 7923 Chemical products used in industry-General method for determination of chloride ions-Potentiometric method
TS 8156 Determination of spontaneous ignition temperatures of liquid chemicals
TS 8262 Determination of chemical composition of gases- Mass spectrometry method
TS 8410 Determination of density or relative density in pure liquid chemicals
TS 8417 Determination of the amount of foam in aqueous media - Bottle test
TS 8419 Determination of the amount of foam in aqueous media - Mixer test
TS 8691 Chemical products - Used in industry - Safety rules for sampling
TS 8894 Chemical products - Sampling terms used in industry
TS 9355 Gas analysis - Preparation of calibration gas mixtures - Dynamic volumetric methods - Periodic injections into a gas stream
TS EN ISO 10280 Steel and iron - Determination of titanium - Diantipyrilethane spectrophotometric method
TS ISO 10349-1 Photography- Chemicals used in photography- Test methods- Part 1: General
TS ISO 10349-2 Photography- Chemicals used in photography- Test methods- Part 2: Determination of water-insoluble matter
TS ISO 10349-5 Photography- Chemicals used in photography- Test methods- Part 5: Determination of heavy metals and iron content
TS ISO 10349-6 Photography- Chemicals used in photography- Test methods- Part 6: Determination of halide content
TS ISO 10349-7 Photography- Chemicals used in photography- Test methods- Part 7: Determination of alkalinity or acidity
TS ISO 10349-9 Photography- Chemicals used in photography- Test methods- Part 9: Reaction with ammonia silver nitrate
TS ISO 10349-10 Photography- Chemicals used in photography- Test methods- Part 10: Determination of sulfur content
TS ISO 10349-11 Photography- Chemicals used in photography- Test methods- Part 11: Determination of relative density
TS EN ISO 10700 Determination of iron and steel manganese-Flame atomic absorption spectrometric method
TS 11511 Water quality-Filters-Precoat filter-Classification and features
TS 12038 Platinum crucibles - Determination of palladium, rhodium, ruthenium, iridium, gold, silver, copper and iron
TS 12160 Zirconium and zirconium alloys-Determination of hafnium
TS 12183 Titanium and titanium alloys-Chemical analysis methods-Determination of aluminum and vanadium
TS 12195 Brazing filler metals-Palladium and palladium alloy-Chemical analysis methods-Palladium, silver, copper, manganese, nickel and lead determination
TS 12196 Titanium and titanium alloys-Hydrogen determination
TS 12197 Titanium and titanium alloys-Chemical analysis methods-Determination of cobalt, molybdenum, iron and phosphorus
TS 12313 Silicon-Metallic-Chemical analysis methods-Determination of silicon, carbon, phosphorus, sulfur, iron aluminum and calcium
TS 12375 Chemical analysis methods of chromium metal
TS EN 12402 Lead and lead alloys - Sampling methods for analysis
TS EN 12698-1 Chemical analysis of nitride bonded cislium carbide refractories - Part 1: Chemical methods
TS 13046 Liquids-Sampling
TS EN ISO 14912 Gas analysis - Conversion of compound data for gas mixtures
TS EN ISO 15796 Gas analysis - Investigation and improvement of analytical prestresses
TSE ISO / TR 15969 Chemical analysis of surfaces - Depth profiling - Measurement of etching depth
TS EN ISO 16664 Gas analysis - Transport, use of calibration gases and gas mixtures - Guidance
TS ISO 17973 Chemical analysis of surfaces - Auger electron spectrometers with medium separation power - Calibration of energy scales for element analysis
TS ISO 17974 Chemical analysis of surfaces - Auger electron spectrometers with high separation power - Calibration of energy scales for elemental and chemical state analysis
TS ISO 18115 Chemical analysis of surfaces-Glossary
TS EN 24829-1 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method-Part 1-Samples containing 0,05% 1,0
TS EN 15768 Effect of materials on drinking and using water - GC-MS Identification of organic substances that can pass into water
Safety regulations of the electrical equipment used in the laboratory for measuring, checking and laboratory operations - Part 61010-2: Particular requirements for thermal atomisers and ionisation atomic spectrometers used in the laboratory
TS 4885 Chemicals used in industry - General method for the determination of iron - Spectrophotometric method with 1,10-Phenanthroline
TS ISO 6286 Molecular absorption spectrometry- Terms and recipes- General- Apparatus and materials
TS ISO 6955 Analytical spectroscopy methods- Flame emission, atomic absorption and atomic fluorescence spectrophotometry- Terms and definitions
TS 11890 Ion selective electrodes-Terms
TS 13398 Toluene - Determination of hydrocarbon impurities - Capillary column gas chromatographic method
TS EN 15527 Identification of wastes - Determination of polycyclic aromatic hydrocarbons (chamfer) in solid waste using gas chromatography mass spectrometry (gc / ms)