Our company provides accredited testing, inspection and certification services to all of the following Paint Coating Process Standards with international approval.
TS EN 658-1 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 1: Determination of tensile strength
TS EN 820-1 Advanced technology ceramics - Monolithic ceramics - Test methods - Thermomechanical properties - Part 1: Determination of bending strength at high temperatures
TS EN7-2 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 2: Determination of linear density
TS EN 12789 Advanced technology ceramics - Ceramic composites - Mechanical properties at high temperature atmospheric pressure - Determination of flexural strength
TS EN 820-2 Advanced technology ceramics - Monolithic ceramics - Test methods - Thermomechanical properties - Part 2: Determination of deformation caused by its own weight
TS EN7-4 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN ISO 15732 Advanced technology ceramics - Determination of fracture strength of monolithic ceramics at room temperature by single edge pre-fracture beam method (sepb)
TS EN ISO 18756 Advanced technology ceramics (advanced ceramics, advanced ceramics) - Determination of fracture strength of single ceramics at room temperature by bending surface cracking method
TS ENV 1071-5 Advanced technology ceramics - Test methods for ceramic coatings part 5: Determination of porosity
TS ISO 15490 Provinces technology ceramics-Monolithic ceramics-Test method for determination of tensile strength at room temperature
TS EN 12788 Advanced technology ceramics - Ceramic composites - Mechanical properties in high temperature and inert atmosphere - Determination of flexural strength
TS EN ISO 18753 Advanced technology ceramics (advanced ceramics, advanced ceramics) - Determination of the absolute density of ceramic powders by pycnometer
TS EN ISO 18757 Advanced technology ceramics - Determination of specific surface area of ceramic powders by gas adsorption using Bet method
TS EN 725-11 Advanced technical ceramics-Test methods for ceramic powders-Part 11: Determination of condensation in natural sintering
TS EN 13234 Advanced technology ceramics - Ceramic composites - Mechanical properties at ambient temperature - Evaluation of resistance to crack propagation with notch sensitivity test
TS EN 13235 Advanced technology ceramics - Ceramic composites - Mechanical properties at ambient temperature - Evaluation of resistance to crack propagation with notch sensitivity test
TS EN 12923-1 Advanced technology ceramics - Monolithic ceramics - Part 1: General applications for corrosion testing
TSE CEN / TR 13233 Advanced technology ceramics - Ceramic composites - Abbreviations and symbols
TS EN 15335 Advanced technology ceramics - Ceramic composites - Determination of elasticity properties by vibratory beam method up to 2000 ° C
TS EN 725-5 / AC Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 1071-10 Advanced technology ceramics - Test methods for ceramic coatings - Part 10: Determination of coating thickness by cross-section
TS EN 843-7 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 7: C-Ring tests
TS EN 843-8 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 8: Guidance for the creation of validation tests
TS EN7-7 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 7: Determination of the tensile strength and elongation distribution of filaments in a multifilament fiber cord at ambient high temperature "
TS EN 15365 Advanced technical ceramics - Mechanical properties of high temperature ceramic fibers in inactive environment - Determination of creep property by cold tip method
TS EN7-4: 2005 / AC Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN 1159-1: 2006 / AC Advanced technology ceramics - Ceramic composites - Thermoplastic properties - Part 1: Determination of thermal expansion
TS EN 1421 Ammonium chloride - Used in the treatment of drinking and potable water
TS EN ISO 13383-1 Fine-grained ceramics (developed ceramics, advanced technology ceramics) -Microstructure characterization-Part 1: Determination of particle size and size distribution
TS EN ISO 13383-2 Fine-grained ceramics (developed ceramics, advanced technology ceramics) -Microstructure characterization-Part 2: Determination of phase volume ratio by micrograph evaluation
TS EN ISO 26443 Technical ceramics (advanced ceramics, advanced ceramics) - Rockwell hardness test for the evaluation of adhesion of ceramic coatings
TS EN ISO 14544 Technical ceramics (advanced ceramics, advanced ceramics) - High temperature mechanical properties of ceramic composites - Determination of pressure properties
TS EN ISO 14604 Technical ceramics (advanced ceramics, advanced technology ceramics) - Test methods for ceramic coatings - Determination of breaking unit deformation value
TS EN ISO 17161 Technical ceramics (advanced ceramics, advanced ceramics) - Ceramic composites - Determination of the degree of deviation from the direction in uniaxial mechanical tests
TS EN ISO 18452 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of thickness of ceramic films with contact-probe profile-gauge
TS EN ISO 20504 Technical ceramics (advanced ceramics, advanced ceramics) - Test method for determining the pressure behavior of continuous fiber reinforced composites at room temperature
TS EN ISO 23145-1 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of bulk density of ceramic powders - Part 1: Compressed density
TS EN ISO 23145-2 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of bulk density of ceramic powders - Part 2: Loose density
TS EN ISO 23146 Technical ceramics (advanced ceramics, advanced ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edged V-notch rod method
TS EN ISO 26423 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of coating thickness by crater grinding method
TS EN ISO 26424 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of wear resistance of coatings by micro-level wear test
TS EN ISO 14629 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of fluidity properties of ceramic powders
TS EN ISO 17140 Technical ceramics (advanced ceramics, advanced ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
TS EN ISO 17142 Technical ceramics (advanced ceramics, advanced technology ceramics) - Mechanical properties of ceramic composites in high temperature and air environment, atmospheric pressure - Determination of fatigue properties in constant oscillation
TS EN ISO 14574 Technical ceramics (advanced ceramics, advanced ceramics) - High temperature mechanical properties of ceramic composites - Determination of tensile properties
TS EN ISO 20502 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of adhesion of ceramic coatings by scratch test
TS EN 658-3 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 3: Determination of flexural strength
TS EN 658-4 Advanced technology ceramics - Ceramic composites - mechanical properties at room temperature - part 4: Determination of shear strength under pressure in notched test specimens
TS EN 658-5 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 5: Determination of shear strength between layers by short span three point bending test
TS EN 725-3 Advanced technical ceramics-Test methods for ceramic powders-Part 3: Determination of non-oxidized oxygen content-Carrier gas thermal extraction method
TS EN 725-5 Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 725-10 Advanced technology ceramics - Test methods for ceramic powders - Part 10: Determination of compaction properties
TS EN 725-2 Advanced technology ceramics-Test methods for ceramic powders-Part 2: Determination of impurities in barium titanate
TS EN 725-1 Advanced technology ceramics-Test methods for ceramic powders-Part 1: Determination of impurities in alumina
TS EN 725-4 Advanced technical ceramics-Test methods for ceramic powders-Part 4: Determination of oxygen content in aluminum nitride by xrf analysis
TS EN 820-4 Advanced technology ceramics - Monolithic ceramics - Thermomechanical properties - Part 4: Determination of creep deformation in bending at high temperatures
TS EN 820-3 Advanced technology ceramics-Monolithic ceramics-Thermomechanical properties-Part 3: Determination of resistance to thermal shock by instant cooling with water
TS EN 820-5 Advanced technology ceramics - Monolithic ceramics - Thermomechanical properties - Part 5: Determination of elastic modulus at high temperatures
TS EN 821-1 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 1: Determination of thermal expansion
TS EN 821-3 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 3: Determination of specific heat capacity
TS EN 821-2 High-tech ceramics- Monolithic ceramics- Thermo-Physical properties section 2: Thermal diffusivity by laser flashing (or heat pulse) method
TS EN 843-1 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature-Part 1: Determination of flexural strength
TS EN 843-2 Advanced technology ceramics- Monolithic ceramics- Mechanical properties at room temperature section 2: Determination of elastic modulus
TS EN 843-3 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 3: Determination of crack growth parameters under critical value by constant bending strength test
TS EN 843-4 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature-Part 4: Vickers, knoop and rockwell superficial hardness
TS EN 843-5 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature section 5: Statistical analysis
TS EN 843-6 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 6: Guidance for fractographic examination
TS EN6 High-tech ceramics - Monolithic ceramics - Selection guide for test specimen parts for evaluation of properties
TS EN7-1 Advanced technology ceramics - Ceramic composites - Experimental methods for reinforcing materials - Part 1: Determination of reinforcing agent content
TS EN7-3 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials 3: Determination of filament diameter and cross-sectional area
tst EN7-4 / tst AC Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN7-5 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 5: Determination of tensile strength and elongation distribution of filaments in a multifilament fiber cord at ambient temperature
TS EN7-6 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 6: Determination of high temperature tensile strength of filaments
TS EN 1071-4 Advanced technology ceramics-Ceramic coatings-Test methods-Part 4: Determination of chemical composition
TS EN 1071-12 Advanced technology ceramics - Test methods for ceramic coatings - Part 12: Tear test for commute movement
TS EN 1071-13 Advanced technology ceramics - Test methods for ceramic coatings - Part 13: Determination of tear rate by needle disc method
TS EN 1159-1 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 1: Determination of thermal expansion
TS EN 1159-2 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 2-Determination of thermal diffusivity
TS EN 1159-3 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 3: Determination of heating temperature
TS EN 1159-3 / AC Advanced technology ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
TS EN 1389 Advanced technical ceramics-Ceramic components-Physical properties-Determination of density and apparent porosity
TS EN 12788 Advanced technology ceramics - Ceramic composites - Mechanical properties in high temperature and inert atmosphere - Determination of flexural strength
TS ENV 12923-2 Advanced technology ceramics - Monolithic ceramics - Part 2: Oxidation test
TS EN 14186 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Determination of elastic properties by ultrasonic method
TS ENV 14226 Advanced technology ceramics - Ceramic powders - Test methods - Determination of calcium, magnesium, iron and aluminum in silicon nitride - Flame atomic absorption spectrometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-Aes) method
TS EN 14232 High-end ceramics - Terms, descriptions and abbreviations
TS ENV 14273 Advanced technology ceramics - Ceramic powders - Determination of crystalline phases in zirconium oxide