The standards required for ceramics are given below. We test, audit, inspect and certify all of the standards given below.
TS EN 820-1 Advanced technology ceramics - Monolithic ceramics - Test methods - Thermomechanical properties - Part 1: Determination of bending strength at high temperatures
TS EN7-2 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 2: Determination of linear density
TS 7544 ISO 4282 Fluorite - For acid and ceramic production - Determination of mass loss at 105 ° c
TS EN 12789 Advanced technology ceramics - Ceramic composites - Mechanical properties at high temperature atmospheric pressure - Determination of flexural strength
TS EN 820-2 Advanced technology ceramics - Monolithic ceramics - Test methods - Thermomechanical properties - Part 2: Determination of deformation caused by its own weight
TS EN7-4 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS EN 1748-2-2 Glass - Used in construction - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity / finished products
TS EN ISO 15732 Advanced technology ceramics - Determination of fracture strength of monolithic ceramics at room temperature by single edge pre-fracture beam method (sepb)
TS EN ISO 18756 Advanced technology ceramics (advanced ceramics, advanced ceramics) - Determination of fracture strength of single ceramics at room temperature by bending surface cracking method
TS EN 12788 Advanced technology ceramics - Ceramic composites - Mechanical properties in high temperature and inert atmosphere - Determination of flexural strength
TS EN ISO 18753 Advanced technology ceramics (advanced ceramics, advanced ceramics) - Determination of the absolute density of ceramic powders by pycnometer
TS EN ISO 18757 Advanced technology ceramics - Determination of specific surface area of ceramic powders by gas adsorption using Bet method
TS EN 725-11 Advanced technical ceramics-Test methods for ceramic powders-Part 11: Determination of condensation in natural sintering
TS EN 13234 Advanced technology ceramics - Ceramic composites - Mechanical properties at ambient temperature - Evaluation of resistance to crack propagation with notch sensitivity test
TS EN 13235 Advanced technology ceramics - Ceramic composites - Mechanical properties at ambient temperature - Evaluation of resistance to crack propagation with notch sensitivity test
TS EN 12923-1 Advanced technology ceramics - Monolithic ceramics - Part 1: General applications for corrosion testing
TSE CEN / TR 13233 Advanced technology ceramics - Ceramic composites - Abbreviations and symbols
TS EN 15335 Advanced technology ceramics - Ceramic composites - Determination of elasticity properties by vibratory beam method up to 2000 ° C
TS EN 725-5 / AC Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 1071-10 Advanced technology ceramics - Test methods for ceramic coatings - Part 10: Determination of coating thickness by cross-section
TS EN 843-7 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 7: C-Ring tests
TS EN 843-8 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 8: Guidance for the creation of validation tests
TS EN7-7 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 7: Determination of the tensile strength and elongation distribution of filaments in a multifilament fiber cord at ambient high temperature "
TS EN 15365 Advanced technical ceramics - Mechanical properties of high temperature ceramic fibers in inactive environment - Determination of creep property by cold tip method
TS EN 15979 Ceramic raw material and basic material testing - Direct determination of impurities mass in silicon carbide powder and granules
tst 4897 Clay - Used in ceramic making - Determination of drying and firing shrinkage
TS EN7-4: 2005 / AC Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN 1159-1: 2006 / AC Advanced technology ceramics - Ceramic composites - Thermoplastic properties - Part 1: Determination of thermal expansion
tst 3676 Sieve analysis method of plastic raw materials that do not show plastic properties
tst 2745 Clays used in ceramic making
TS 202 / T1 Ceramic tiles - Tiles
TS EN 1421 Ammonium chloride - Used in the treatment of drinking and potable water
TS 2743 Clays used in ceramic making - Sampling
Direct testing of the mass fraction of impurities in silicon carbide powder and granule by inductively coupled plasma optical emission spectrometry method (βp oes)
TS EN ISO 13383-1 Fine-grained ceramics (developed ceramics, advanced technology ceramics) -Microstructure characterization-Part 1: Determination of particle size and size distribution
TS EN ISO 13383-2 Fine-grained ceramics (developed ceramics, advanced technology ceramics) -Microstructure characterization-Part 2: Determination of phase volume ratio by micrograph evaluation
TS EN ISO 26443 Technical ceramics (advanced ceramics, advanced ceramics) - Rockwell hardness test for the evaluation of adhesion of ceramic coatings
TS EN ISO 14544 Technical ceramics (advanced ceramics, advanced ceramics) - High temperature mechanical properties of ceramic composites - Determination of pressure properties
TS EN ISO 14604 Technical ceramics (advanced ceramics, advanced technology ceramics) - Test methods for ceramic coatings - Determination of breaking unit deformation value
TS EN ISO 17161 Technical ceramics (advanced ceramics, advanced ceramics) - Ceramic composites - Determination of the degree of deviation from the direction in uniaxial mechanical tests
TS EN ISO 18452 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of thickness of ceramic films with contact-probe profile-gauge
TS EN ISO 20504 Technical ceramics (advanced ceramics, advanced ceramics) - Test method for determining the pressure behavior of continuous fiber reinforced composites at room temperature
TS EN ISO 23145-1 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of bulk density of ceramic powders - Part 1: Compressed density
TS EN ISO 23145-2 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of bulk density of ceramic powders - Part 2: Loose density
TS EN ISO 23146 Technical ceramics (advanced ceramics, advanced ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edged V-notch rod method
TS EN ISO 26423 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of coating thickness by crater grinding method
TS EN ISO 26424 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of wear resistance of coatings by micro-level wear test
TS EN ISO 14629 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of fluidity properties of ceramic powders
TS EN ISO 17140 Technical ceramics (advanced ceramics, advanced ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
TS EN ISO 17142 Technical ceramics (advanced ceramics, advanced technology ceramics) - Mechanical properties of ceramic composites in high temperature and air environment, atmospheric pressure - Determination of fatigue properties in constant oscillation
TS EN ISO 14574 Technical ceramics (advanced ceramics, advanced ceramics) - High temperature mechanical properties of ceramic composites - Determination of tensile properties
TS EN ISO 20502 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of adhesion of ceramic coatings by scratch test
TS 10850 / T1 Porcelain tableware
TS 76 Porcelain insulators for electrical air lines with rated voltage up to 0 v
TS 202 Ceramic tiles - Tiles
TS 202 / Tadil G Ceramic Tiles - Tile
TS EN 658-3 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 3: Determination of flexural strength
TS EN 658-4 Advanced technology ceramics - Ceramic composites - mechanical properties at room temperature - part 4: Determination of shear strength under pressure in notched test specimens
TS EN 658-5 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 5: Determination of shear strength between layers by short span three point bending test
TS EN 725-3 Advanced technical ceramics-Test methods for ceramic powders-Part 3: Determination of non-oxidized oxygen content-Carrier gas thermal extraction method
TS EN 725-5 Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 725-10 Advanced technology ceramics - Test methods for ceramic powders - Part 10: Determination of compaction properties
TS EN 725-2 Advanced technology ceramics-Test methods for ceramic powders-Part 2: Determination of impurities in barium titanate
TS EN 725-12 Advanced technology ceramics - Test methods for ceramic powders - Part 12: Chemical analysis of zirconium oxide
TS EN 725-1 Advanced technology ceramics-Test methods for ceramic powders-Part 1: Determination of impurities in alumina
TS EN 725-4 Advanced technical ceramics-Test methods for ceramic powders-Part 4: Determination of oxygen content in aluminum nitride by xrf analysis
TS EN 820-4 Advanced technology ceramics - Monolithic ceramics - Thermomechanical properties - Part 4: Determination of creep deformation in bending at high temperatures
TS EN 820-3 Advanced technology ceramics-Monolithic ceramics-Thermomechanical properties-Part 3: Determination of resistance to thermal shock by instant cooling with water
TS EN 820-5 Advanced technology ceramics - Monolithic ceramics - Thermomechanical properties - Part 5: Determination of elastic modulus at high temperatures
TS EN 821-1 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 1: Determination of thermal expansion
TS EN 821-1 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 1: Determination of thermal expansion
TS EN 821-3 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 3: Determination of specific heat capacity
TS EN 821-2 High-tech ceramics- Monolithic ceramics- Thermo-Physical properties section 2: Thermal diffusivity by laser flashing (or heat pulse) method
TS EN 843-1 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature-Part 1: Determination of flexural strength
TS EN 843-2 Advanced technology ceramics- Monolithic ceramics- Mechanical properties at room temperature section 2: Determination of elastic modulus
TS EN 843-3 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 3: Determination of crack growth parameters under critical value by constant bending strength test
TS EN 843-4 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature-Part 4: Vickers, knoop and rockwell superficial hardness
TS EN 843-5 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature section 5: Statistical analysis
TS EN 843-6 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 6: Guidance for fractographic examination
TS EN6 High-tech ceramics - Monolithic ceramics - Selection guide for test specimen parts for evaluation of properties
TS EN7-1 Advanced technology ceramics - Ceramic composites - Experimental methods for reinforcing materials - Part 1: Determination of reinforcing agent content
TS EN7-3 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials 3: Determination of filament diameter and cross-sectional area
tst EN7-4 / tst AC Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN7-5 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 5: Determination of tensile strength and elongation distribution of filaments in a multifilament fiber cord at ambient temperature
TS EN7-6 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 6: Determination of high temperature tensile strength of filaments
TS EN 1071-4 Advanced technology ceramics-Ceramic coatings-Test methods-Part 4: Determination of chemical composition
TS EN 1071-12 Advanced technology ceramics - Test methods for ceramic coatings - Part 12: Tear test for commute movement
TS EN 1071-13 Advanced technology ceramics - Test methods for ceramic coatings - Part 13: Determination of tear rate by needle disc method
TS EN 1159-1 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 1: Determination of thermal expansion
TS EN 1159-2 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 2-Determination of thermal diffusivity
TS EN 1159-3 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 3: Determination of heating temperature
TS EN 1159-3 / AC Advanced technology ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
TS EN 1217 Food contact materials and articles - Test methods for water absorption of ceramic articles
TS EN 1389 Advanced technical ceramics-Ceramic components-Physical properties-Density and apparent porosity
TS EN 1894 Advanced technical ceramics - Determination of high temperature ceramic components under inert atmosphere - Determination of shear strength of notched samples by compression loading
TS 2743 Clays used in ceramic making - Sampling
TS 2743 / T1 Clays used in ceramic making - Sampling
TS 2744 Clays used in ceramic production-Grain size analysis with hydrometer and pipette methods
TS 2745 Clays used in ceramic making
TS 2745 / T1 Clays used in ceramic making - Aqueous sieve analysis
TS 2746 Clays used in ceramic production - Determination of free moisture content
TS 2746 / T1 Clays used in ceramic making - Determination of free moisture content
TS 3080 Silicon Dioxide in clays used in the production of white ceramic
TS 3245 Chemical analysis methods for determination of the amount of moisture and loss of heat in clays used in the construction of white ceramics
TS 3335 Methods for the determination of the amounts of potassium oxide and sodium oxide in clays used in the production of white ceramics
TS 3676 Sieve analysis method of plastic raw materials with no powder properties
TS 3676 / T1 Sieve analysis method for plastic raw materials with no powder properties
TS 4380 Determination of apparent density of granulated ceramic and granulated refractory materials - Boiling method in water
TS 4422 ISO 6486-2 Food contact materials and products - Ceramic containers, glass ceramic containers and glass food containers - Exposed lead and cadmium - Part 2: Permissible limit values
TS 4897 Clay - Used in ceramic making - Determination of drying and firing shrinkage
TS 4927 Determination of fracture strength of clays used in porcelain making
TS 5079 Killer - Used in ceramic making - Determination of water soluble sulfate - Photometric method
TS 5396 used in Kaolin-Ceramic industry
TS 5730 Ceramic clays - Filtration rate determination method
TS 5873 Florspar - Determination of silicon dioxide used in acid and ceramic production - Reduced molybdosilicate spectrophotometric method
TS 6335 Fluorite-Ceramic and glass used in construction
TS ISO 6676 Florspar for acid and ceramic production - Determination of total phosphorus content - Reduced molybdophosphate - Spectrometric method
TS 3676 Sieve analysis method of plastic raw materials with no powder properties
TS 3676 / T1 Sieve analysis method for plastic raw materials with no powder properties
TS 4380 Determination of apparent density of granulated ceramic and granulated refractory materials - Boiling method in water
TS 4422 ISO 6486-2 Food contact materials and products - Ceramic containers, glass ceramic containers and glass food containers - Exposed lead and cadmium - Part 2: Permissible limit values
TS 4897 Clay - Used in ceramic making - Determination of drying and firing shrinkage
TS 4927 Determination of fracture strength of clays used in porcelain making
TS 5079 Killer - Used in ceramic making - Determination of water soluble sulfate - Photometric method
TS 5396 used in Kaolin-Ceramic industry
TS 5730 Ceramic clays - Filtration rate determination method
TS 5873 Florspar - Determination of silicon dioxide used in acid and ceramic production - Reduced molybdosilicate spectrophotometric method
TS 6335 Fluorite-Ceramic and glass used in construction
TS ISO 6676 Forspar used in acid and ceramic production - Determination of total phosphorus content - Reduced molybdophosphate - Spectrometric
TS ISO 8391-2 Ceramic cooking utensils-Contact with food-Released lead and cadmium-Part 2: Permissibility limits
TS ISO 9061 Fluorite (florspar) used in the production of acid and ceramic - Determination of iron content - 1,10- Phenanthroline spectrometric method
TS ISO 9062 Fluorite (florspar) - Determination of manganese content used in the production of acid and ceramic - Periodod spectrometric method
TS ISO 9385 Glass and glass ceramics - Knoop hardness test
TS ISO 9504 Fluorite-Metallurgical purity-Determination of antimony content in extract solution-Atomic absorption spectrometric method
TS43 Talk-Used in ceramics industry
TS EN ISO 10545-9 Ceramic tiles - Part 9: Determination of heat shock resistance
TS EN ISO 10545-11 Ceramic tiles - Part 11: Glazed tiles - Determination of crack strength of glaze
TS EN ISO 10545-15 Ceramic tiles - Part 15: Determination of extracted lead and cadmium from glazed tiles
TS 10850 Porcelain tableware
TS 11136 Bentonite - used in the ceramics industry
TS 11325 Feldspar used in ceramics industry
TS ENV 12212 Advanced technology ceramics - Combined method for classification
TS EN 12289 Advanced technical ceramics-Mechanical properties of ceramic components at ambient temperature-Determination of slip properties in plane
TS EN 12788 Advanced technology ceramics - Ceramic composites - Mechanical properties in high temperature and inert atmosphere - Determination of flexural strength
TS ENV 12923-2 Advanced technology ceramics - Monolithic ceramics - Part 2: Oxidation test
TS EN 14186 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Determination of elastic properties by ultrasonic method
TS ENV 14226 Advanced technology ceramics - Ceramic powders - Test methods - Determination of calcium, magnesium, iron and aluminum in silicon nitride - Flame atomic absorption spectrometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-Aes) method
TS EN 14232 High-end ceramics - Terms, descriptions and abbreviations
TS ENV 14273 Advanced technology ceramics - Ceramic powders - Determination of crystalline phases in zirconium oxide
TS EN 14425-3: 2010 Advanced technical ceramics - Test methods for the determination of fracture toughness of monolithic ceramics - Part 3: Chevron notch beam (cnb) method
TS EN 15158 Advanced technology ceramics - High temperature mechanical properties of ceramic composites in inert media - Determination of fatigue properties at constant amplitude
TS EN ISO 21078-2 Determination of boron trioxide in refractory products-Part 2: Determination of boron trioxide in binder components by acid extraction method
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS 2743 Clays used in ceramic making - Sampling
TS EN 623-1 Advanced technology ceramics-Monolithic ceramics-General and texture properties-Part 1: Determination of defects by dye penetration tests
TS EN 821-1 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 1: Determination of thermal expansion
TS 2743 Clays used in ceramic making - Sampling
TS 2743 / T1 Clays used in ceramic making - Sampling
TS ISO 9385 Glass and glass ceramics - Knoop hardness test
TS EN ISO 21078-2 Determination of boron trioxide in refractory products-Part 2: Determination of boron trioxide in binder components by acid extraction method