Glass and Ceramics Industry, Glass Standards

The standards of varnishes used in paint formation are given below. We perform test audit and certification of all of the following standards.

TS EN ISO 14438 Used in glass structures - Determination of energy balance value - Calculation method

TS 3539-2 EN 1279-2 Glass - Used in buildings - Glass based insulating units - Part 2: Long-term test method and properties for moisture permeability

TS 3539-3 EN 1279-3 Glass - Used in buildings - Glass based insulating units - Part 3: Long-term test method and specifications for gas leakage rate and gas concentration tolerances

TS 3539-4 EN 1279-4 Glass - Used in buildings - Glass based insulating units - Part 4: Test methods for the physical properties of edge sealing materials

TS 3539-6 EN 1279-6 Glass - Used in buildings - Glass based insulating units - Part 6: Factory production controls and periodically repeated tests

TS EN ISO 14438 Glass - Used in buildings - Determination of energy compensation value - Calculation method

TS ISO 614 Shipbuilding and maritime structures-Tempered safety glass panels-For rectangular windows and board portholes-Non-destructive strength test with staple method.

TS EN 1051-1 Glass - Used in buildings - Glass blocks and walls - Part 1: Terms and recipes (en 1051-1: 2003)

TS EN 12600 Glass - Used in buildings - Pendulum test - Impact test and performance characteristics for flat glass

TS EN 12603 Glass - Used in structures - Weibul distributed glass strength data - Compatibility and confidence interval operations

TS EN 1748-1-2 Glass - Used in buildings - Special basic products - Part 1-2: Borosilicate glass - Conformity assessment / product standard

TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard

TS EN 572-9 Glass - Structures - Basic soda lime silicate glass products - Part 9: Conformity assessment / product standard

TS EN 1863-2 Glass - Used in buildings - Heat-resistant soda lime silicate glass - Part 2: Conformity assessment / product standard

TS EN 12150-2 Glass - Used in buildings - Heat-tempered soda lime silicate safety glass - Part 2: Conformity assessment / product standard

TS EN 12337-2 Glass - Used in structures - Chemically resistant soda lime silicate glass - Part 2: Conformity assessment / product standard

TS EN 13024-2 Glass - Used in buildings - Heat-tempered borosilicate safety glass - Part 2: Conformity assessment / product standard

TS EN 14178-1 Glass - Used in buildings - Basic earth alkali silicate glass products - Part 1: Float glass

TS EN 14178-2 Glass - Structures - Basic alkaline earth silicate glass products - Part 2: Conformity assessment / product standard

TS EN 1748-1-1 Glass - Structures - special basic products - Borosilicate glasses - Part 1-1: Definitions, general physical and mechanical properties

TS EN 1748-2-1 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-1: Definitions, general physical and mechanical properties

TS EN 12150-2 Glass - Used in buildings - Thermally tempered soda lime silicate safety glass - Part 2: Conformity assessment / product standard

TS EN 12337-2 Glass - Used in structures - Chemically resistant soda lime silicate glass - Part 2: Conformity assessment / product standard

TS EN 13024-2 Glass - Used in buildings - Thermally tempered borosilicate safety glass - Part 2: Conformity assessment / product standard

TS EN 1748-1-2 Glass - Used in buildings - Special basic products - Borosilicate glass - Part 1-2: Conformity assessment / product standard

TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard

TS EN 1096-4 Glass - Used in buildings - Coated glass - part 4: Conformity assessment / product standard

TS EN 14178-2 Glass - Structures - Basic alkaline earth silicate glass products - Part 2: Conformity assessment / product standard

TS EN 1096-4 Glass - Used in buildings - Coated glass - Part 4: Conformity assessment / product standard

TS EN 14449 Glass - Used in buildings - Laminated glass and breaking safety - Conformity assessment / standard product

TS EN 14321-2 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 2: Conformity assessment / product standard

TS EN 14321-1 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 1: Definitions and explanations

TS EN 14179-2 Glass - Used in buildings - Thermally tempered soda lime silicate safety glass by immersion in heat medium - Part 2: Conformity assessment / product standard

TS EN 1748-1-1 Glass - Special basic products for construction - Borosilicate glass - Part 1-1: Definitions and general physical and mechanical properties

TS EN 1748-2-1 Glass - Special basic products used in structures - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties

TS EN 14321-2 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 2: Conformity assessment / product standard

TS EN 14449 / AC Glass - Used in buildings - Laminated glass and laminated safety glass - Conformity assessment / product standard

TS EN 1279-1 / AC Glass - Used in buildings - Glass based insulating units - Part 1: General specifications, dimension tolerances and rules for defining the insulating unit

TS EN 14321-1 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 1: Definitions and explanations

TS EN 12603 Glass - Used in structures - Weibull distributed glass strength data - Processes for compatibility and confidence intervals

TS EN 1051-2 Glass - Used in structures - Glass bricks (blocks) and parquets - Part 2: Evaluation of conformity / product standard

TS EN 1036-1 Glass - Used in buildings - Floating glass mirrors with silver coating - For indoor use - Part 1: Definitions, requirements and test methods

TS EN 1036-2 Glass - Used in buildings - Floating glass mirrors with silver coating - For indoor use - Part 2: Conformity assessment / product standard

TS EN 1051-2 Glass - Used in buildings - Glass bricks (block) and glass parquets - part 2: Conformity assessment / product standard

TS EN 1036-1 Glass - Used in buildings - Mirrors made of silver-coated float glass for indoor use - Part 1: Definitions, specifications and test methods

TS EN 1036-2 Glass - Used in buildings - Mirrors made of silver-coated float glass for indoor use - Part 2: Conformity assessment, product standard

TS 13476 Glass - Used in buildings - General method for selection of glazing

TS EN 1279-5 + A2 Glass - Used in buildings - Glass insulating units - part 5: Conformity assessment

TS EN 15434 + A1 Glass - Used in buildings - Product standard for structural and / or ultraviolet resistant sealants (for use in glass sealing units with structural sealing units and / or outdoor sealants)

TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification

TS EN 410 Glass - Used in buildings - Determination of light and solar radiation properties of glass building elements

TS EN 673 Used in glass structures - Determination of heat conductivity (u value) - Calculation method

TS EN 675 - Thermal conductivity (u value) used in glass structures - Heat flow meter method

TS EN ISO 12543-1 Glass - used in buildings - Laminated glass and laminated safety glass - Part 1: Description and description of components

TS EN ISO 12543-2 Glass - used in buildings - Laminated glass and laminated safety glass - Part 2: Laminated safety glass

TS EN ISO 12543-3 Glass- Used in buildings- Laminated glass and laminated safety glass- Part 3: Laminated glass

TS EN ISO 12543-4 Glass - used in buildings - Laminated glass and laminated safety glass - Part 4: Endurance test methods

TS EN ISO 12543-5 Glass- used in buildings- Laminated glass and laminated safety glass- Part 5: Dimensions and edge processing

TS EN ISO 12543-6 Glass- Used in buildings- Laminated glass and laminated safety glass- Part 6: Appearance

TS EN ISO 12543-2 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 2: Laminated safety glass

TS EN ISO 12543-3 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 3: Laminated glass

TS EN ISO 12543-4 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 4: Test methods for durability

TS EN ISO 12543-5 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 5: Dimensions and edge processing

TS EN ISO 12543-6 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 6: Appearance

TSE K 86 / T1 Thermoplastic elastomer seal for door and window glass

TS EN 1863-1 Glass- used in buildings- Partially tempered soda lime silicate glass - Part 1: Definitions and explanations

TS EN 13541 Glass - Used in buildings - Safety glass systems - Bursting pressure test and classification

TS EN 1096-2 Glass used in buildings - Coated glass - Part 2: Specification and test methods for Class A, Class B and Class S coatings

TS EN ISO 12543-6: 2012 / AC Glass - used in buildings - Laminated glass and laminated safety glass - Part 6: Appearance

TS EN 13024-1 Glass - Thermally tempered borosilicate safety glass used in buildings - Part 1: Definitions and explanations

TS 13594 Vacuum solar collectors made of borosilicate glass tube - used in water heating applications

TS EN 1096-3 Glass - Structures used - Coated glass - Part 3: Specification and test methods for class C and class D coatings

TS EN 12150-2 / T1 Glass - Used in buildings - Thermally tempered soda lime silicate safety glass - Part 2: Conformity assessment / product standard

TS EN 1096-4 / T1 Glass - used in buildings - coated glass - part 4: conformity assessment / product standard

EN 572-1 Glass - Used in construction - Basic soda lime silicate glass products - Part 1: Definitions, general physical and mechanical properties

EN 572-2 Glass - Used in buildings - Basic soda lime silicate glass products - Part 2: Float glass

EN 572-3 Glass - Structures - Basic soda lime silicate glass products - Part 3: Polished wire glass

EN 572-5 Glass - Used in construction - Basic soda lime silicate glass products - Part 5: Patterned glass

EN 572-6 Glass - Structures - Basic soda lime silicate glass products - Part 6: Patterned stranded glass

EN 572-7 Glass - Structures - Basic soda lime silicate glass products - Part 7: Wireline or cordless channel-shaped glass

EN 572-8 Glass - Structures - Basic soda lime silicate glass products - Part 8: Market dimensions and final cut dimensions

TS EN 572-2 Glass - Used in buildings - Basic soda lime silicate glass products - Part 2: Float glass

TS EN 572-3 Glass - Used in buildings - Basic soda lime silicate glass products - Part 3: Polished wire glass

TS 347 EN 572-4 Glass - Used in construction - Basic soda lime silicate glass products - Part 4: Tensile flat glass

TS EN 572-5 Glass - Used in buildings - Basic soda lime silicate glass products - Part 5: Patterned glass

TS EN 572-6 Glass - Structures - Basic soda lime silicate glass products - Part 6: Patterned stranded glass

TS EN 572-7 Glass - Structures - Basic soda lime silicate glass products - Part 7: Wireline or radio channel shaped glass

TS EN 572-4 Glass - Used in construction - Basic soda lime silicate glass products - Part 4: Tensile flat glass

TS EN 673 Glass - Used in buildings - Determination of thermal transmittance (U value) - Calculation method

TS EN 674 - Thermal conductivity (u value) used in glass structures - Enclosed hot plate method

TS EN 675 - Thermal conductivity (u value) used in glass structures - Heat flow meter method

TS EN ISO 12543-4 / T1 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 4: Test methods for durability

TS EN 15682-1 Glass - Buildings - Thermally tempered earth alkali silicate safety glasses - Part 1: Definitions and Definitions

TS EN 15682-2 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glasses - Part 1: Conformity assessment / Product standard

TS EN 15683-1 Glass - Buildings - Thermally tempered, channel soda lime silicate safety glasses - Part 1: Definitions and Definitions

TS EN 14072 Glass - Used in furniture - Test methods

TS EN 15683-2 Glass for buildings - Thermally annealed, channel-shaped soda lime silicate safety glass - Part 2: Product / conformity assessment standard

TS EN ISO 12543-1 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 1: Description and description of components

TSE K 278 Decorative shaped glass and mirrors

TS EN 13022-1 Glass for buildings - Structural sealing glass systems - Part 1: Glass products for structural sealing glass systems for single and multiple glass, with and without support

TS EN 13022-2 Glass - Used in buildings - Structural sealed glass systems - Part 2: Installation requirements

TS EN 15752-1 Glass for buildings - One-side self-adhesive polymeric film - Part 1: Definitions and requirements

TS EN 15755-1 Glass for buildings - One side self-adhesive polymeric film - Part 1: Definitions and requirements

TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification

TS EN 1096-2 Glass in buildings - Coated glass - Part 2: Requirements and test methods for Class A, Class B and Class S coatings

TS EN 13022-1 Glass for buildings - Structural sealing glass systems - Part 1: Glass products for structural sealing glass systems for single and multiple glass, with and without support

TS EN 13022-2 Glass in buildings - Structural sealed glass systems - Part 2: Installation requirements

TS EN 15683-2 Glass for buildings - Thermally annealed, channel-shaped soda lime silicate safety glass - Part 2: Product / conformity assessment standard

TS EN 15752-1 Glass for buildings - One-side self-adhesive polymeric film - Part 1: Definitions and requirements

TS EN 15755-1 Glass for buildings - One side self-adhesive polymeric film - Part 1: Definitions and requirements

TS 13750 Glass Mosaics

TS EN 1096-5 Glass used in buildings - Coated glass - Test methods and classification for self-cleaning performance of coated glass surfaces

TS EN 15681-1 Glass used in construction - Basic aluminum silicate glass products - Part 1: Definitions and general physical and mechanical properties

TS EN 572-1 + A1 Glass - Structures - Basic soda lime silicate glass products - Part 1: Recipes, general physical and mechanical properties

TS EN 572-8 + A1 Glass - Structures - Basic soda lime silicate glass products - Part 8: Market dimensions and final cut dimensions

TS EN 12150-1 Glass - Thermally tempered, soda lime silicate safety glass used in buildings - Part 1: Recipes - Explanations

TS EN 12488 Glass installation in buildings - Installation guidelines for vertical and inclined glass

TS EN 14179-1 Glass - Used in buildings - Thermally tempered and heat-treated soda lime silicate safety glass - Part 1: Description and explanations

tst EN 12150-1 Glass - Thermally tempered, soda lime silicate safety glass used in buildings - Part 1: Recipes - Explanations

TS EN 16477-1 Glass for buildings - Painted glass for interior use - Part 1: Requirements

TS 13750 Glass Mosaics

TS EN 15681-2 Glass in buildings - Basic aluminum silicate glass products - Part 2: Product standard

TS 719 ISO 695 Resistance to boiling aqueous solution of glass-alkali mixture- Test method and classification

TS 766 ISO 720 Hydrolytic resistance of glass beads at 121 ° C - Test method and classification

TS 905 ISO 719 Hydrolytic resistance of glass beads at 98 ° C - Test method and classification

TS 2962-1 EN 1051-1 Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features

TS 2962-1 EN 1051-1 / T1 (Number modification, TS EN 1051-1) Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features

TS EN 1063 Safety glasses - Used in buildings - Testing and classification of bullet resistance

TS 3539-1 EN 1279-1 / AC Glass - Used in buildings - Glass based insulating units - Part 1: General specifications, size tolerances and rules for defining the insulating unit

TS EN 1288-1 Glass - Used in structures - Determination of flexural strength - Part 1: Principles of glass tests

TS EN 1288-2 Used in glass structures - Determination of flexural strength - Part 2: Coaxial double ring test for flat surface specimens with large surface area

TS EN 1288-3 Used in glass structures - Determination of flexural strength - Part 3: Test with two points supported test (four point bending)

TS EN 1288-4 Glass-used in structures- Determination of flexural strength-Part 4: Test of channel-shaped glasses

TS EN 1288-5 Used in glass structures - Determination of flexural strength - Part 5: Coaxial double ring test for flat surface specimens with small surface area

TS EN 1595 Glass - Pressure resistant equipment - Made of borosilicate glass 3.3 - General rules for design, manufacture and testing

TS EN 1863-2 Glass - Part-tempered soda lime silicate glass used in buildings - Part 2: conformity assessment

TS 2913 Physical test methods of glass containers

TS 2978 Chemical analysis method for the determination of total r2o3 in glass sands

TS 2979 Chemical analysis method for the determination of silicon dioxide in glass sands

TS 2980 Determination of glow loss in glass sands

TS 3030 Chemical analysis method for the determination of chromium - 3 - Oxide (cr2o3) in glass sands

TS 3079 Soda-lime, fluorinated opal and borosilicate glass in the determination of loss of glow

TS 3130 Chemical analysis methods for the determination of iron - 3 - Oxide, titanium dioxide, aluminum - 3 - Oxide and zikronium dioxide in glass sands

TS 3133 Soda - Chemical analysis methods for the determination of silicon dioxide, barium oxide, r2o3, calcium oxide and magnesium oxide in lime and borosilicate glasses

TS 3258 Glass containers - bottles and jars - heads - shapes and sizes

TS 3258 / T1 Glass containers - bottles and jars - heads - shape and dimensions modified 1

TS ISO 3538 Road vehicles-Safety glassware-Test methods for optical properties

TS 3539-1 EN 1279-1 Glass - Used in buildings - Glass based insulating units - Part 1: General specifications, dimension tolerances and rules for defining the insulating unit

TS ISO 3586 Glass plant, pipeline and fittings - General rules for testing, transport, loading, unloading and handling

TS 3587 ISO 1776 Glass-100 Resistance to hydrochloric acid at ° C-Flame emission or flame atomic absorption spectrometric method

TS 3675 Sieve analysis method of raw materials used in glass production

TS 3758 ISO 7991 Glass - Determination of average coefficient of linear thermal elongation

TS 4033 Limestone - used in colorless glass production - Chemical analysis methods

TS 4403 ISO 7086-2 Food contact materials and products - Glass hollow containers - Exposed lead and cadmium - Part 2: Permissible limit values

TS 4746 Limestone - Used for the production of ground, colorless glass

TS ISO 4790 Glasses - Glass - Glass sealing - Determination of stresses

TS ISO 4795 for glass-thermometer cups

TS ISO 4802-1 Glassware-Hydrolytic strength of the surface of glass containers-Part 1: Determination and classification by titration method

TS ISO 4802-2 Glassware-Hydrolytic strength of the inner surface of glass containers-Part 2: Determination and classification by flame spectrometer

TS 5121 Feldspar - used in the production of glass

TS 5122 Glass sand - used in glass production

TS 5124 Sampling of glass sand and glass sand raw materials

TS 5513 Resistant glass panels for ship windows

tst 5532 ISO 3254 Shipbuilding and maritime structures - Tempered safety glass panels - For rectangular windows

TS 5599 Glass bottles and containers-Chemical resistance-Test methods

TS 5814 Luxury lamp glasses

TS 6335 Fluorite-Ceramic and glass used in construction

TS EN ISO 6414 Technical drawing for glassware

TS 6500 Crystal glass

TS 6500 / T1 Crystal glass

TS ISO 7884-2 Glass- Viscosity and viscometric fixed points- Part 2: Viscosity determination with rotary viscometers

TS ISO 7884-3 Glass - Viscosity and viscometric fixed points - Part 3: Viscosity determination by fiber elongation based viscometers

TS ISO 7884-4 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by bending glass rod

TS ISO 7884-5 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point with sinking rod viscometer

TS ISO 7884-6 Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point

TS ISO 7884-7 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing and tensile points of rod glasses by bending

TS ISO 7884-8 Glass- Viscosity and viscometric fixed points- Part 8: Determination of the conversion temperature

TS ISO 8424 Raw optical glass -25 resistance to the effect of aqueous acidic solutions in ° C-Test method and classification

TS 8470 Alcoholic beverages - used for commercial purposes - Volume marking rules

TS 8977 Glass-Viscosity and viscometric fixed points-Chapter 1: Determination principles of viscosity and viscometric fixed points

TS ISO 9385 Glass and glass ceramics - Knoop hardness test

TS29 Potassium nitrate-used in glass manufacturing

TS30 Sodium nitrate - used in glass manufacturing

TS ISO 10136-1 Glass and glassware - Analysis of extract solutions - Part 1: Determination of silicon dioxide by molecular absorption spectrometry

TS ISO 10136-2 Glass and glassware - Analysis of extract solutions - Part 2: Determination of sodium dioxide and potassium oxide by flame spectrometric methods

TS ISO 10136-3 Glass and glassware - Analysis of extract solutions - Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry

TS ISO 10136-4 Glass and glassware - Analysis of extract solutions - Part 4: Determination of aluminum oxide by molecular absorption spectrometry

TS ISO 10136-5 Glass and glassware - Analysis of extract solutions - Part 5: Determination of iron (III) oxide by molecular absorption and flame atomic absorption spectrometry

TS ISO 10136-6 Glass and glassware - Analysis of extract solutions - Part 6: Determination of boron (III) oxide by molecular absorption spectrometry

TS ISO 10345-1 Glass- Stress- Determination of optical coefficient- Part 1: Tensile test

TS ISO 10345-2 Glass- Stress- Determination of optical coefficient- Part 2: Bending test

TS ISO 10629 Optical glass - Raw - resistance to the effect of aqueous alkaline solutions in 50 c - Test method and classification

TS 10720 Dolomite - used in glass industry

TS 11141 Glasses - Greenhouse glass

TS ISO 11455 Glass - Optical glass - Raw - Double wash determination

TS 11502 Glass panels - Tempered - Used in household appliances

TS 11502 / T1 Glass panels - tempered - used in household appliances

TS ISO 12123 Glass - Raw optical glass - Shaped and preformed - Bubbles and other inclusions - Test method and classification

TS 13308 Tableware - Glass

TS 13308 / T1 Tableware - Glass

TS 13433 Glass - Used in buildings - Code of practice for safety related to human impact

TS EN 14072 Glass - Used in furniture - Test methods

TS EN 14178-1 Glass - Used in structures - Basic alkaline earth silicate glass products - Part 1: Float glass

TS EN 14179-2 Glass - Used in buildings - Thermally tempered and heat-treated soda lime silicate safety glass - Part 2: Conformity assessment / product standard

TS EN 14449 Glass - Used in buildings - Laminated glass and laminated safety glass - Conformity assessment / product standard

TS EN 15434 + A1 Glass - Product standard for structural and / or ultraviolet radiation-resistant sealing material (for use in structural sealing glazing and / or sealing glass units exposed to the environment)

TS EN 15998: 2010 Glass - Used in buildings - Safety during fire, fire resistance - Methodology for testing glass for classification purposes

TS EN ISO 21078-2 Determination of boron trioxide in refractory products-Part 2: Determination of boron trioxide in binder components by acid extraction method