Our company provides internationally approved and accredited test, inspection, inspection and certification services with its expert staff in the following standards.
TS 4633 EN 993-1 Test methods for dense refractory products-Part 1: Determination of coarse density, apparent porosity and true porosity
4722 EN 993-13 Intensive refractory products - Test methods part 13: Properties of the pyrometric reference cones used in the laboratory
TS EN 993-6 Test methods for dense shaped refractory products-Part 6: Determination of fracture strength at ambient temperature
TS EN 623-2 Advanced technology ceramics-Monolithic ceramics-General and textural properties-Part 2: Determination of density and porosity
TS EN 623-2 Advanced technology ceramics-Monolithic ceramics-General and textural properties-Part 2: Determination of density and porosity
TS ENV 1071-5 Advanced technology ceramics - Test methods for ceramic coatings part 5: Determination of porosity
TS 4899 EN 993-16 Densely shaped rectal products-Test methods-Part 16: Determination of resistance to sulfuric acid
TS EN ISO 14438 Used in glass structures - Determination of energy balance value - Calculation method
TS EN 658-1 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 1: Determination of tensile strength
TS EN 820-1 Advanced technology ceramics - Monolithic ceramics - Test methods - Thermomechanical properties - Part 1: Determination of bending strength at high temperatures
TS EN7-2 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 2: Determination of linear density
TS 7544 ISO 4282 Fluorite - For acid and ceramic production - Determination of mass loss at 105 ° c
TS 3539-2 EN 1279-2 Glass - Used in buildings - Glass based insulating units - Part 2: Long-term test method and properties for moisture permeability
TS 3539-3 EN 1279-3 Glass - Used in buildings - Glass based insulating units - Part 3: Long-term test method and specifications for gas leakage rate and gas concentration tolerances
TS 3539-4 EN 1279-4 Glass - Used in buildings - Glass based insulating units - Part 4: Test methods for the physical properties of edge sealing materials
TS 3539-6 EN 1279-6 Glass - Used in buildings - Glass based insulating units - Part 6: Factory production controls and periodically repeated tests
TS EN 993-18 Refractory products - Dense, shaped - Test methods - part 18: Determination of bulk density of granular materials by water method under vacuum
TS EN ISO 14438 Glass - Used in buildings - Determination of energy compensation value - Calculation method
TS ISO 614 Shipbuilding and maritime structures-Tempered safety glass panels-For rectangular windows and board portholes-Non-destructive strength test with staple method.
TS 2757 ISO 836 Refractory materials-Terms and recipes
TS EN 1051-1 Glass - Used in buildings - Glass blocks and walls - Part 1: Terms and recipes (en 1051-1: 2003)
TS EN 12600 Glass - Used in buildings - Pendulum test - Impact test and performance characteristics for flat glass
TS EN 12603 Glass - Used in structures - Weibul distributed glass strength data - Compatibility and confidence interval operations
TS EN 12789 Advanced technology ceramics - Ceramic composites - Mechanical properties at high temperature atmospheric pressure - Determination of flexural strength
TS EN 820-2 Advanced technology ceramics - Monolithic ceramics - Test methods - Thermomechanical properties - Part 2: Determination of deformation caused by its own weight
TS EN7-4 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN 1748-1-2 Glass - Used in buildings - Special basic products - Part 1-2: Borosilicate glass - Conformity assessment / product standard
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS EN 572-9 Glass - Structures - Basic soda lime silicate glass products - Part 9: Conformity assessment / product standard
TS EN 1863-2 Glass - Used in buildings - Heat-resistant soda lime silicate glass - Part 2: Conformity assessment / product standard
TS EN 12150-2 Glass - Used in buildings - Heat-tempered soda lime silicate safety glass - Part 2: Conformity assessment / product standard
TS EN 12337-2 Glass - Used in structures - Chemically resistant soda lime silicate glass - Part 2: Conformity assessment / product standard
TS EN 13024-2 Glass - Used in buildings - Heat-tempered borosilicate safety glass - Part 2: Conformity assessment / product standard
TS EN 14178-1 Glass - Used in buildings - Basic earth alkali silicate glass products - Part 1: Float glass
TS EN 14178-2 Glass - Structures - Basic alkaline earth silicate glass products - Part 2: Conformity assessment / product standard
TS EN 1748-1-1 Glass - Structures - special basic products - Borosilicate glasses - Part 1-1: Definitions, general physical and mechanical properties
TS EN 1748-2-1 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-1: Definitions, general physical and mechanical properties
TS EN 12150-2 Glass - Used in buildings - Thermally tempered soda lime silicate safety glass - Part 2: Conformity assessment / product standard
TS EN 12337-2 Glass - Used in structures - Chemically resistant soda lime silicate glass - Part 2: Conformity assessment / product standard
TS EN 13024-2 Glass - Used in buildings - Thermally tempered borosilicate safety glass - Part 2: Conformity assessment / product standard
TS EN 1748-1-2 Glass - Used in buildings - Special basic products - Borosilicate glass - Part 1-2: Conformity assessment / product standard
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS EN 1748-2-2 Glass - Used in buildings - Special basic products - Glass ceramics - Part 2-2: Conformity assessment / product standard
TS EN 1096-4 Glass - Used in buildings - Coated glass - part 4: Conformity assessment / product standard
TS EN 14178-2 Glass - Structures - Basic alkaline earth silicate glass products - Part 2: Conformity assessment / product standard
TS EN 1096-4 Glass - Used in buildings - Coated glass - Part 4: Conformity assessment / product standard
TS EN 14449 Glass - Used in buildings - Laminated glass and breaking safety - Conformity assessment / standard product
TS EN 14321-2 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 2: Conformity assessment / product standard
TS EN 14321-1 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 1: Definitions and explanations
TS EN 14179-2 Glass - Used in buildings - Thermally tempered soda lime silicate safety glass by immersion in heat medium - Part 2: Conformity assessment / product standard
TS EN ISO 15732 Advanced technology ceramics - Determination of fracture strength of monolithic ceramics at room temperature by single edge pre-fracture beam method (sepb)
TS EN ISO 18756 Advanced technology ceramics (advanced ceramics, advanced ceramics) - Determination of fracture strength of single ceramics at room temperature by bending surface cracking method
TS EN 1748-1-1 Glass - Special basic products for construction - Borosilicate glass - Part 1-1: Definitions and general physical and mechanical properties
TS EN 1748-2-1 Glass - Special basic products used in structures - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties
TS EN 12788 Advanced technology ceramics - Ceramic composites - Mechanical properties in high temperature and inert atmosphere - Determination of flexural strength
TS EN 14321-2 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 2: Conformity assessment / product standard
TS EN ISO 18753 Advanced technology ceramics (advanced ceramics, advanced ceramics) - Determination of the absolute density of ceramic powders by pycnometer
TS EN ISO 18757 Advanced technology ceramics - Determination of specific surface area of ceramic powders by gas adsorption using Bet method
TS EN 14449 / AC Glass - Used in buildings - Laminated glass and laminated safety glass - Conformity assessment / product standard
TS EN 14024 Metal profiles - Thermal insulation - Mechanical properties - Requirements assessment and tests
TS EN 725-11 Advanced technical ceramics-Test methods for ceramic powders-Part 11: Determination of condensation in natural sintering
TS EN 1279-1 / AC Glass - Used in buildings - Glass based insulating units - Part 1: General specifications, dimension tolerances and rules for defining the insulating unit
TS EN 14321-1 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glass - Part 1: Definitions and explanations
TS EN 12603 Glass - Used in structures - Weibull distributed glass strength data - Processes for compatibility and confidence intervals
TS EN 13234 Advanced technology ceramics - Ceramic composites - Mechanical properties at ambient temperature - Evaluation of resistance to crack propagation with notch sensitivity test
TS EN 13235 Advanced technology ceramics - Ceramic composites - Mechanical properties at ambient temperature - Evaluation of resistance to crack propagation with notch sensitivity test
TS EN 12923-1 Advanced technology ceramics - Monolithic ceramics - Part 1: General applications for corrosion testing
TSE CEN / TR 13233 Advanced technology ceramics - Ceramic composites - Abbreviations and symbols
TS EN 12698-2 Chemical analysis of nitrite-bound cislium carbide refractories - Part 2: XRD methods
TS EN 15335 Advanced technology ceramics - Ceramic composites - Determination of elasticity properties by vibratory beam method up to 2000 ° C
TS EN 725-5 / AC Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 1051-2 Glass - Used in structures - Glass bricks (blocks) and parquets - Part 2: Evaluation of conformity / product standard
TS EN ISO 21587-1 Chemical analysis of aluminacilica refractory products (alternative method to x-ray fluorescence method) - Part 1: Instruments, reagents, solution and gravimetric silica
TS EN ISO 21587-3 Chemical analysis of aluminacilica refractory products (alternative method to x-ray fluorescence method) - Part 4: Inductively coupled plasma and atomic absorption spectrometric method
TS EN 1036-1 Glass - Used in buildings - Floating glass mirrors with silver coating - For indoor use - Part 1: Definitions, requirements and test methods
TS EN 1036-2 Glass - Used in buildings - Floating glass mirrors with silver coating - For indoor use - Part 2: Conformity assessment / product standard
TS EN 1051-2 Glass - Used in buildings - Glass bricks (block) and glass parquets - part 2: Conformity assessment / product standard
TS EN 1036-1 Glass - Used in buildings - Mirrors made of silver-coated float glass for indoor use - Part 1: Definitions, specifications and test methods
TS EN 1036-2 Glass - Used in buildings - Mirrors made of silver-coated float glass for indoor use - Part 2: Conformity assessment, product standard
TS EN ISO 1893 Refractory products - Determination of refractoriness under load - Differential method with temperature increase
TS EN ISO 20182 Refractory test piece preparation-Pneumatic spraying on refractory panels with mix type guns
TS EN ISO 21068-1 Chemical analysis of silicon carbide containing raw materials and refractory products - Part 1: General information and sample preparation
TS EN ISO 21068-3 Chemical analysis of silicon carbide containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen, metallic and oxidic components
TS EN ISO 21079-2 Chemical analysis of refractories containing alumina, zirconia and silicon dioxide - Refractories containing 5-45 zro (index 2) (alternative method to x-ray fluorescence method) - Part 2: Wet chemical analysis
Chemical analysis of refractories containing alumina, zirconia and silicon dioxide - Refractories containing 21079-3 zro (index 5) - Part 45: Flame atomic absorption spectrophotometry (faas) and inductive mapped plasma emission spectrometry (βp-Aes) method
TS EN 13035-3 + A1 Machinery and installations for the manufacture, processing and processing of flat glass - Safety rules - Part 3: Cutting machines
TS 13476 Glass - Used in buildings - General method for selection of glazing
TS EN 1071-10 Advanced technology ceramics - Test methods for ceramic coatings - Part 10: Determination of coating thickness by cross-section
TS EN 13035-4 + A1 Machinery and installations for the manufacture, processing and processing of flat glass - Safety regulations - Part 4: Tilting / lifting tables
TS EN 13035-3 + A1 Machinery and installations for the manufacture, processing and processing of flat glass - Safety rules - Part 3: Cutting machines
TS EN 13035-3 + A1 / AC Machinery and installations for the manufacture, processing and processing of flat glass - Safety rules - Part 3: Cutting machines
TS EN 1279-5 + A2 Glass - Used in buildings - Glass insulating units - part 5: Conformity assessment
TS EN 13035-11 + A1 Machines and plants for the production and processing of flat glass - Safety requirements - Part 11: Drilling machines
TS EN 15434 + A1 Glass - Used in buildings - Product standard for structural and / or ultraviolet resistant sealants (for use in glass sealing units with structural sealing units and / or outdoor sealants)
TS EN 13035-3 + A1 / AC Machinery and installations for the manufacture, processing and processing of flat glass - Safety rules - Part 3: Cutting machines
TS EN 843-7 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 7: C-Ring tests
TS EN 843-8 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 8: Guidance for the creation of validation tests
TS EN7-7 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 7: Determination of the tensile strength and elongation distribution of filaments in a multifilament fiber cord at ambient high temperature "
TS EN 15365 Advanced technical ceramics - Mechanical properties of high temperature ceramic fibers in inactive environment - Determination of creep property by cold tip method
TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification
TS EN 15979 Ceramic raw material and basic material testing - Direct determination of impurities mass in silicon carbide powder and granules
TS EN 410 Glass - Used in buildings - Determination of light and solar radiation properties of glass building elements
TS EN 673 Used in glass structures - Determination of heat conductivity (u value) - Calculation method
TS EN ISO 2106 Aluminum and aluminum alloys - Anodic oxidation (anodizing coating) - Determination of coating mass (surface density) of anodic oxide coatings per unit area - Gravimetric method
tst 4897 Clay - Used in ceramic making - Determination of drying and firing shrinkage
EN 572-5 Glass - Used in construction - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 572-6 Glass - Structures - Basic soda lime silicate glass products - Part 6: Patterned stranded glass
EN 572-7 Glass - Structures - Basic soda lime silicate glass products - Part 7: Wireline or cordless channel-shaped glass
EN 572-8 Glass - Structures - Basic soda lime silicate glass products - Part 8: Market dimensions and final cut dimensions
EN 572-1 Glass - Used in construction - Basic soda lime silicate glass products - Part 1: Definitions, general physical and mechanical properties
EN 572-2 Glass - Used in buildings - Basic soda lime silicate glass products - Part 2: Float glass
EN 572-3 Glass - Structures - Basic soda lime silicate glass products - Part 3: Polished wire glass
TS EN 2757 Aviation series - Structural bonding system - Test method - Determination of drying and burning residues of primers
TS EN 675 - Thermal conductivity (u value) used in glass structures - Heat flow meter method
TS EN ISO 12543-1 Glass - used in buildings - Laminated glass and laminated safety glass - Part 1: Description and description of components
TS EN ISO 12543-2 Glass - used in buildings - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
TS EN ISO 12543-3 Glass- Used in buildings- Laminated glass and laminated safety glass- Part 3: Laminated glass
TS EN ISO 12543-4 Glass - used in buildings - Laminated glass and laminated safety glass - Part 4: Endurance test methods
TS EN ISO 12543-5 Glass- used in buildings- Laminated glass and laminated safety glass- Part 5: Dimensions and edge processing
TS EN ISO 12543-6 Glass- Used in buildings- Laminated glass and laminated safety glass- Part 6: Appearance
TS EN ISO 12543-1 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 1: Description and description of components
TS EN ISO 12543-2 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
TS EN ISO 12543-3 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 3: Laminated glass
TS EN ISO 12543-4 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 4: Test methods for durability
TS EN ISO 12543-5 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 5: Dimensions and edge processing
TS EN ISO 12543-6 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 6: Appearance
TS EN ISO 12677 Refractory materials - Chemical analysis by Xrf method - Baked cast bead method
TS EN 1863-1 Glass- used in buildings- Partially tempered soda lime silicate glass - Part 1: Definitions and explanations
TS EN 1096-2 Glass used in buildings - Coated glass - Part 2: Specification and test methods for Class A, Class B and Class S coatings
TS EN 1096-3 Glass - Structures used - Coated glass - Part 3: Specification and test methods for class C and class D coatings
TSE K 86 / T1 Thermoplastic elastomer seal for door and window glass
TS EN 13541 Glass - Used in buildings - Safety glass systems - Bursting pressure test and classification
TS 4974 Basic refractory materials - Determination of water content, bulk density and hydration resistance
TS EN ISO 12543-6: 2012 / AC Glass - used in buildings - Laminated glass and laminated safety glass - Part 6: Appearance
TS EN7-4: 2005 / AC Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN 1159-1: 2006 / AC Advanced technology ceramics - Ceramic composites - Thermoplastic properties - Part 1: Determination of thermal expansion
TS EN 13024-1 Glass - Thermally tempered borosilicate safety glass used in buildings - Part 1: Definitions and explanations
TS 13594 Vacuum solar collectors made of borosilicate glass tube - used in water heating applications
tst 3676 Sieve analysis method of plastic raw materials that do not show plastic properties
tst 2745 Clays used in ceramic making
TS EN 12150-2 / T1 Glass - Used in buildings - Thermally tempered soda lime silicate safety glass - Part 2: Conformity assessment / product standard
TS EN 1096-4 / T1 Glass - used in buildings - coated glass - part 4: conformity assessment / product standard
TS 202 / T1 Ceramic tiles - Tiles
TS EN 572-2 Glass - Used in buildings - Basic soda lime silicate glass products - Part 2: Float glass
TS EN 572-3 Glass - Used in buildings - Basic soda lime silicate glass products - Part 3: Polished wire glass
TS 347 EN 572-4 Glass - Used in construction - Basic soda lime silicate glass products - Part 4: Tensile flat glass
TS EN 572-5 Glass - Used in buildings - Basic soda lime silicate glass products - Part 5: Patterned glass
TS EN 572-6 Glass - Structures - Basic soda lime silicate glass products - Part 6: Patterned stranded glass
TS EN 572-7 Glass - Structures - Basic soda lime silicate glass products - Part 7: Wireline or radio channel shaped glass
TS EN ISO 1927-1 Refractory products - Unformed - part 1: General information and classification
TS EN 1421 Ammonium chloride - Used in the treatment of drinking and potable water
TS EN 572-4 Glass - Used in construction - Basic soda lime silicate glass products - Part 4: Tensile flat glass
TS EN ISO 1927-2: 2012 Refractory products - Unformed - section 2: Sampling for experiments
1927-3: 2012 Refractory products - Unformed - Part 3: Determination of the properties of
TS EN ISO 1927-4: 2012 Refractory products - Unformed - Part 4: Determination of the consistency of castable materials
TS EN ISO 1927-5: 2012 Refractory products - Non-shaped - Part 5: Preparation and processing of test specimen parts
TS EN ISO 1927-6: 2012 Refractory products - Unformed - Part 6: Measurement of physical properties
1927-7: 2012 Refractory products - Unformed - Part 7: tests for preformed products
TS EN ISO 1927-8: 2012 Refractory products - Unformed - part 8: Determination of complementary properties
TS EN 14072 Glass - Used in furniture - Test methods
TS 2743 Clays used in ceramic making - Sampling
TS EN 673 Glass - Used in buildings - Determination of thermal transmittance (U value) - Calculation method
TS EN 674 - Thermal conductivity (u value) used in glass structures - Enclosed hot plate method
TS EN 675 - Thermal conductivity (u value) used in glass structures - Heat flow meter method
TS EN ISO 12543-4 / T1 Glass - Used in buildings - Laminated glass and laminated safety glass - Part 4: Test methods for durability
TS EN 15682-1 Glass - Buildings - Thermally tempered earth alkali silicate safety glasses - Part 1: Definitions and Definitions
TS EN 15682-2 Glass - Used in buildings - Thermally tempered earth alkali silicate safety glasses - Part 1: Conformity assessment / Product standard
TS EN 15683-1 Glass - Buildings - Thermally tempered, channel soda lime silicate safety glasses - Part 1: Definitions and Definitions
TS EN 15683-2 Glass for buildings - Thermally annealed, channel-shaped soda lime silicate safety glass - Part 2: Product / conformity assessment standard
TS EN 13022-1 Glass for buildings - Structural sealing glass systems - Part 1: Glass products for structural sealing glass systems for single and multiple glass, with and without support
TS EN 13022-2 Glass - Used in buildings - Structural sealed glass systems - Part 2: Installation requirements
TS EN 15752-1 Glass for buildings - One-side self-adhesive polymeric film - Part 1: Definitions and requirements
TS EN 15755-1 Glass for buildings - One side self-adhesive polymeric film - Part 1: Definitions and requirements
TSE K 356 Calcined magnesite
TS EN ISO81-4 Classification of dense shaped refractory products_ Section: 4 Special Products
TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification
TS EN 1096-2 Glass in buildings - Coated glass - Part 2: Requirements and test methods for Class A, Class B and Class S coatings
TS EN 13022-1 Glass for buildings - Structural sealing glass systems - Part 1: Glass products for structural sealing glass systems for single and multiple glass, with and without support
TS EN 13022-2 Glass in buildings - Structural sealed glass systems - Part 2: Installation requirements
TS EN 15683-2 Glass for buildings - Thermally annealed, channel-shaped soda lime silicate safety glass - Part 2: Product / conformity assessment standard
TS EN 15752-1 Glass for buildings - One-side self-adhesive polymeric film - Part 1: Definitions and requirements
TS EN 15755-1 Glass for buildings - One side self-adhesive polymeric film - Part 1: Definitions and requirements
TS 13750 Glass Mosaics
TS 13750 Glass Mosaics
TS EN 1096-5 Glass used in buildings - Coated glass - Test methods and classification for self-cleaning performance of coated glass surfaces
TS EN 15681-1 Glass used in construction - Basic aluminum silicate glass products - Part 1: Definitions and general physical and mechanical properties
TS EN 572-1 + A1 Glass - Structures - Basic soda lime silicate glass products - Part 1: Recipes, general physical and mechanical properties
TS EN 572-8 + A1 Glass - Structures - Basic soda lime silicate glass products - Part 8: Market dimensions and final cut dimensions
TS EN 12150-1 Glass - Thermally tempered, soda lime silicate safety glass used in buildings - Part 1: Recipes - Explanations
Direct testing of the mass fraction of impurities in silicon carbide powder and granule by inductively coupled plasma optical emission spectrometry method (βp oes)
TS EN ISO 13383-1 Fine-grained ceramics (developed ceramics, advanced technology ceramics) -Microstructure characterization-Part 1: Determination of particle size and size distribution
TS EN ISO 13383-2 Fine-grained ceramics (developed ceramics, advanced technology ceramics) -Microstructure characterization-Part 2: Determination of phase volume ratio by micrograph evaluation
TS EN ISO 14544 Technical ceramics (advanced ceramics, advanced ceramics) - High temperature mechanical properties of ceramic composites - Determination of pressure properties
TS EN ISO 14574 Technical ceramics (advanced ceramics, advanced ceramics) - High temperature mechanical properties of ceramic composites - Determination of tensile properties
TS EN ISO 14604 Technical ceramics (advanced ceramics, advanced technology ceramics) - Test methods for ceramic coatings - Determination of breaking unit deformation value
TS EN ISO 17161 Technical ceramics (advanced ceramics, advanced ceramics) - Ceramic composites - Determination of the degree of deviation from the direction in uniaxial mechanical tests
TS EN ISO 18452 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of thickness of ceramic films with contact-probe profile-gauge
TS EN ISO 20502 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of adhesion of ceramic coatings by scratch test
TS EN ISO 20504 Technical ceramics (advanced ceramics, advanced ceramics) - Test method for determining the pressure behavior of continuous fiber reinforced composites at room temperature
TS EN ISO 23145-1 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of bulk density of ceramic powders - Part 1: Compressed density
TS EN ISO 23145-2 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of bulk density of ceramic powders - Part 2: Loose density
TS EN ISO 23146 Technical ceramics (advanced ceramics, advanced ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edged V-notch rod method
TS EN ISO 26423 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of coating thickness by crater grinding method
TS EN ISO 26424 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of wear resistance of coatings by micro-level wear test
TS EN ISO 26443 Technical ceramics (advanced ceramics, advanced ceramics) - Rockwell hardness test for the evaluation of adhesion of ceramic coatings
TS EN ISO 14629 Technical ceramics (advanced ceramics, advanced ceramics) - Determination of fluidity properties of ceramic powders
TS EN ISO 17140 Technical ceramics (advanced ceramics, advanced ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
TS EN ISO 17142 Technical ceramics (advanced ceramics, advanced technology ceramics) - Mechanical properties of ceramic composites in high temperature and air environment, atmospheric pressure - Determination of fatigue properties in constant oscillation
TS EN 12488 Glass installation in buildings - Installation guidelines for vertical and inclined glass
TS EN 14179-1 Glass - Used in buildings - Thermally tempered and heat-treated soda lime silicate safety glass - Part 1: Description and explanations
tst EN 12150-1 Glass - Thermally tempered, soda lime silicate safety glass used in buildings - Part 1: Recipes - Explanations
tst 2017114390 Refractories-Magnesite and dolamide based-Boron determination-Titrimetric method
TS EN 16477-1 Glass for buildings - Painted glass for interior use - Part 1: Requirements
TS 10850 / T1 Porcelain tableware
TS EN 15681-2 Glass in buildings - Basic aluminum silicate glass products - Part 2: Product standard
TS 76 Porcelain insulators for electrical air lines with rated voltage up to 0 v
TS 202 Ceramic tiles - Tiles
TS 202 / Tadil G Ceramic Tiles - Tile
TS 719 ISO 695 Resistance to boiling aqueous solution of glass-alkali mixture- Test method and classification
TS EN 725-3 Advanced technical ceramics-Test methods for ceramic powders-Part 3: Determination of non-oxidized oxygen content-Carrier gas thermal extraction method
TS EN 725-5 Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 725-10 Advanced technology ceramics - Test methods for ceramic powders - Part 10: Determination of compaction properties
TS EN 725-2 Advanced technology ceramics-Test methods for ceramic powders-Part 2: Determination of impurities in barium titanate
TS EN 658-3 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 3: Determination of flexural strength
TS EN 658-4 Advanced technology ceramics - Ceramic composites - mechanical properties at room temperature - part 4: Determination of shear strength under pressure in notched test specimens
TS EN 658-5 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Part 5: Determination of shear strength between layers by short span three point bending test
TS EN 820-4 Advanced technology ceramics - Monolithic ceramics - Thermomechanical properties - Part 4: Determination of creep deformation in bending at high temperatures
TS EN 820-3 Advanced technology ceramics-Monolithic ceramics-Thermomechanical properties-Part 3: Determination of resistance to thermal shock by instant cooling with water
TS EN 820-5 Advanced technology ceramics - Monolithic ceramics - Thermomechanical properties - Part 5: Determination of elastic modulus at high temperatures
TS EN 821-1 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 1: Determination of thermal expansion
TS EN 821-1 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 1: Determination of thermal expansion
TS EN 821-3 Advanced technical ceramics-Monolithic ceramics-Thermo-Physical properties-Part 3: Determination of specific heat capacity
TS EN 821-2 High-tech ceramics- Monolithic ceramics- Thermo-Physical properties section 2: Thermal diffusivity by laser flashing (or heat pulse) method
TS 719 ISO 695 Resistance to boiling aqueous solution of glass-alkali mixture- Test method and classification
TS EN 725-3 Advanced technical ceramics-Test methods for ceramic powders-Part 3: Determination of non-oxidized oxygen content-Carrier gas thermal extraction method
TS EN 725-5 Advanced technical ceramics - Test methods for ceramic powders-Part 5: Particle size distribution test
TS EN 725-10 Advanced technology ceramics - Test methods for ceramic powders - Part 10: Determination of compaction properties
TS EN 725-2 Advanced technology ceramics-Test methods for ceramic powders-Part 2: Determination of impurities in barium titanate
TS EN 843-1 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature-Part 1: Determination of flexural strength
TS EN 843-2 Advanced technology ceramics- Monolithic ceramics- Mechanical properties at room temperature section 2: Determination of elastic modulus
TS EN 843-3 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 3: Determination of crack growth parameters under critical value by constant bending strength test
TS EN 843-4 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature-Part 4: Vickers, knoop and rockwell superficial hardness
TS EN 843-5 Advanced technical ceramics-Monolithic ceramics-Mechanical properties at room temperature section 5: Statistical analysis
TS EN 843-6 Advanced technology ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 6: Guidance for fractographic examination
TS 905 ISO 719 Hydrolytic resistance of glass beads at 98 ° C - Test method and classification
TS EN 993-3 Dense shaped refractory products - Part 3: Test methods for carbon-containing refractories
TS EN 993-4 Test methods for shaped, dense refractory products - Part 4: Determination of gas permeability
TS EN 993-9 Dense shaped refractory products - Part 9: Creep determination in compression
TS EN 993-10 Refractory products-Dense and shaped-Test methods-Part 10: Determination of permanent change in dimensions as a result of heating
TS EN 993-19 Dense shaped refractory products - Test methods - Part 19: Determination of thermal expansion by difference method
TS 4400 EN 993-2 / A1 Refractory products- Densely shaped- Test methods- Part 2: Determination of actual density
TS EN 993-11 Test methods for dense, shaped refractory products - Determination of thermal shock resistance
TS EN6 High-tech ceramics - Monolithic ceramics - Selection guide for test specimen parts for evaluation of properties
TS EN7-1 Advanced technology ceramics - Ceramic composites - Experimental methods for reinforcing materials - Part 1: Determination of reinforcing agent content
TS EN7-3 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials 3: Determination of filament diameter and cross-sectional area
tst EN7-4 / tst AC Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 4: Determination of tensile properties of filaments at ambient temperature
TS EN7-5 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 5: Determination of tensile strength and elongation distribution of filaments in a multifilament fiber cord at ambient temperature
TS EN7-6 Advanced technology ceramics - Ceramic composites - Test methods for reinforcing materials - Part 6: Determination of high temperature tensile strength of filaments
TS 2962-1 EN 1051-1 Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features
TS 2962-1 EN 1051-1 / T1 (Number modification, TS EN 1051-1) Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features
TS EN 1063 Safety glasses - Used in buildings - Testing and classification of bullet resistance
TS EN 1071-4 Advanced technology ceramics-Ceramic coatings-Test methods-Part 4: Determination of chemical composition
TS EN 1071-12 Advanced technology ceramics - Test methods for ceramic coatings - Part 12: Tear test for commute movement
TS EN 1071-13 Advanced technology ceramics - Test methods for ceramic coatings - Part 13: Determination of tear rate by needle disc method
TS EN 1094-4 Insulating refractory products - Part 4: Determination of bulk density and true porosity
TS EN 1094-1 Insulation refractory products - Part 1: Terms and recipes, classification and test methods for high temperature insulation wool products
TS EN 1159-1 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 1: Determination of thermal expansion
TS EN 1159-2 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 2-Determination of thermal diffusivity
TS EN 1159-3 Advanced technology ceramics-Ceramic components-Thermophysical properties-Part 3: Determination of heating temperature
TS EN 1159-3 / AC Advanced technology ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
TS EN 1217 Food contact materials and articles - Test methods for water absorption of ceramic articles
TS 3539-1 EN 1279-1 / AC Glass - Used in buildings - Glass based insulating units - Part 1: General specifications, size tolerances and rules for defining the insulating unit
TS EN 1288-1 Glass - Used in structures - Determination of flexural strength - Part 1: Principles of glass tests
TS EN 1288-2 Used in glass structures - Determination of flexural strength - Part 2: Coaxial double ring test for flat surface specimens with large surface area
TS EN 1288-3 Used in glass structures - Determination of flexural strength - Part 3: Test with two points supported test (four point bending)
TS EN 1288-4 Glass-used in structures- Determination of flexural strength-Part 4: Test of channel-shaped glasses
TS EN 1288-5 Used in glass structures - Determination of flexural strength - Part 5: Coaxial double ring test for flat surface specimens with small surface area
TS EN 1389 Advanced technical ceramics-Ceramic components-Physical properties-Determination of density and apparent porosity
TS EN 1894 Advanced technical ceramics - Determination of high temperature ceramic components under inert atmosphere - Determination of shear strength of notched samples by compression loading
TS 2050 Measurement of electrical properties of microwave tubes Back-Wave oscillator tubes- "0" type
TS 2300 EN 1094-2 Refractory products- Insulator- Section 2: Classification of shaped products
TS 2301 Densely shaped refractory products - Nomenclature of construction process
TS 2302 EN 1094-6 Refractory products- Insulator- Part 6: Determination of the permanent change in the dimensions of shaped products by heating
TS 2303 Intensively shaped refractory products Determination of permanent dimensional changes due to heating
TS 2332 Refractory bricks-Rectangular bricks-Dimensions
TS 2333 Refractory bricks-Belt bricks-Dimensions
TS 2743 Clays used in ceramic making - Sampling
TS 2743 / T1 Clays used in ceramic making - Sampling
TS 2744 Clays used in ceramic production-Grain size analysis with hydrometer and pipette methods
TS 2745 Clays used in ceramic making
TS 2745 / T1 Clays used in ceramic making - Aqueous sieve analysis
TS 2746 Clays used in ceramic production - Determination of free moisture content
TS 2746 / T1 Clays used in ceramic making - Determination of free moisture content
TS 2913 Physical test methods of glass containers
TS 2978 Chemical analysis method for the determination of total r2o3 in glass sands
TS 2979 Chemical analysis method for the determination of silicon dioxide in glass sands
TS 2980 Determination of glow loss in glass sands
TS 3030 Chemical analysis method for the determination of chromium - 3 - Oxide (cr2o3) in glass sands
TS 3079 Soda-lime, fluorinated opal and borosilicate glass in the determination of loss of glow
TS 3080 Silicon Dioxide in clays used in the production of white ceramic
TS 3130 Chemical analysis methods for the determination of iron - 3 - Oxide, titanium dioxide, aluminum - 3 - Oxide and zikronium dioxide in glass sands
TS 3133 Soda - Chemical analysis methods for the determination of silicon dioxide, barium oxide, r2o3, calcium oxide and magnesium oxide in lime and borosilicate glasses
TS 3245 Chemical analysis methods for determination of the amount of moisture and loss of heat in clays used in the construction of white ceramics
TS 3258 Glass containers - bottles and jars - heads - shapes and sizes
TS 3258 / T1 Glass containers - bottles and jars - heads - shape and dimensions modified 1
TS 3335 Methods for the determination of the amounts of potassium oxide and sodium oxide in clays used in the production of white ceramics
TS ISO 3538 Road vehicles-Safety glassware-Test methods for optical properties
TS 3539-1 EN 1279-1 Glass - Used in buildings - Glass based insulating units - Part 1: General specifications, dimension tolerances and rules for defining the insulating unit
TS ISO 3586 Glass plant, pipeline and fittings - General rules for testing, transport, loading, unloading and handling
TS 3587 ISO 1776 Glass-100 Resistance to hydrochloric acid at ° C-Flame emission or flame atomic absorption spectrometric method
TS 3675 Sieve analysis method of raw materials used in glass production
TS 3676 Sieve analysis method of plastic raw materials with no powder properties
TS 3676 / T1 Sieve analysis method for plastic raw materials with no powder properties
TS 3758 ISO 7991 Glass - Determination of average coefficient of linear thermal elongation
TS 4033 Limestone - used in colorless glass production - Chemical analysis methods
TS 4379 EN 993-17 Refractory products-Dense and shaped-Test methods-Part 17: Determination of bulk density of granular materials-Mercury method under vacuum
TS 4380 Determination of apparent density of granulated ceramic and granulated refractory materials - Boiling method in water
TS 4380 Determination of apparent density of granulated ceramic and granulated refractory materials - Boiling method in water
TS 4400 EN 993-2 Refractory products - Densely shaped - Test methods - Part 2: Determination of actual density
TS 4401 Determination of thermal shock resistance of refractory bricks by water cooling method
TS 4402 Determination of thermal shock resistance of refractory bricks by air cooling method
TS 4403 ISO 7086-2 Food contact materials and products - Glass hollow containers - Exposed lead and cadmium - Part 2: Permissible limit values
TS 4422 ISO 6486-2 Food contact materials and products - Ceramic containers, glass ceramic containers and glass food containers - Exposed lead and cadmium - Part 2: Permissible limit values
TS 4484 Sampling and acceptance tests for shaped refractory products
TS 4485 EN 993-5 Refrater- Products- Intensely shaped- Test methods- Part 5: Determination of cold fracture strength
TS 4746 Limestone - Used for the production of ground, colorless glass
TS ISO 4790 Glasses - Glass - Glass sealing - Determination of stresses
TS ISO 4795 for glass-thermometer cups
TS ISO 4802-1 Glassware-Hydrolytic strength of the surface of glass containers-Part 1: Determination and classification by titration method
TS ISO 4802-2 Glassware-Hydrolytic strength of the inner surface of glass containers-Part 2: Determination and classification by flame spectrometer
TS 4824 High alumina refractory bricks - General purpose
TS 4824 / tst T High alumina refractory bricks - General purpose
TS 4825 Silica refractory bricks - general purpose
TS 4825 / tst T Silica refractory bricks - general purpose
TS 4826 Fireclay and semi-refractory bricks - General purpose
TS 4826 / tst T Fireclay and semi-silica refractory bricks - General purpose
TS 4853 Unshaped refractory materials - Part-1: Preparation and firing method of cast refractory materials
TS 4854 Unshaped refractory materials - Part-2: Method of preparation and firing of sprayed refractory materials
TS 4897 Clay - Used in ceramic making - Determination of drying and firing shrinkage
TS 4898 Refractory materials - Determination of volume weight - Paraffin wax coating method
TS 4927 Determination of fracture strength of clays used in porcelain making
TS 4973 Fire clay - Ground - Alumina silicate used for building refractory bricks
TS 4975 EN 993-7 Refractory products-Densely shaped-Test methods-Part 7: Determination of fracture strength at high temperatures
TS ISO 5019-6 Refractory bricks - Dimensions - Part 6: Basic bricks used in oxygen steel converters
TS 5027 Magnesite refractory bricks - General purpose
TS 5027 / tst T Magnesite refractory bricks - General purpose
TS 5028 Magnesite-Chrome and chrome magnesite refractory bricks-General purpose
TS 5028 / tst T Magnesite - Chrome and chrome magnesite refractory bricks - General purpose
TS 5079 Killer - Used in ceramic making - Determination of water soluble sulfate - Photometric method
TS 5121 Feldspar - used in the production of glass
TS 5122 Glass sand - used in glass production
TS 5124 Sampling of glass sand and glass sand raw materials
TS 5231 Magnesite-Chrome refractory bricks-Used in cement rotary kilns
TS 5231 / Modified G Magnesite-Chrome refractory bricks - used in cement rotary kilns
TS 5279 Refractory bricks-Part 3: Mesh rectangular bricks for regenerator furnaces-Dimensions
TS 5280 Refractory bricks - Part 5: Pillow bricks - Dimensions
TS 5281 / tst T Refractory bricks - Part 6: Basic bricks for oxygen converters - Dimensions
TS 5288 Silica refractory bricks - used in coke ovens
TS 5288 / Modified G Silica refractory bricks - used in coke ovens
TS 5396 used in Kaolin-Ceramic industry
TS 5410 Chamotte and high alumina refractory bricks - used in cement rotary kilns
TS ISO 5417 Refractory bricks for rotary kilns Dimensions
TS 5480 Fireclay and semi-silica refractory bricks - used in cupola furnaces
TS 5480 / Modified G Fireclay and semi-silica refractory bricks - used in cupola furnaces
TS 5513 Resistant glass panels for ship windows
tst 5532 ISO 3254 Shipbuilding and maritime structures - Tempered safety glass panels - For rectangular windows
TS 5535 Fireclay and semi-refractory bricks - used in boilers
TS 5535 / Modified G Fireclay and semi-Silica refractory bricks - used in boilers
TS 5599 Glass bottles and containers-Chemical resistance-Test methods
TS 5730 Ceramic clays - Filtration rate determination method
TS 5790 Refractory bricks - Dimensions - Part 4 - Dome bricks for electric arc furnaces
TS 5814 Luxury lamp glasses
TS 5873 Florspar - Determination of silicon dioxide used in acid and ceramic production - Reduced molybdosilicate spectrophotometric method
TS 5941 Chromite-Refractory Industry
TS 6272 Acid bricks-General purpose
TS 6276 Refractory bricks - High-temperature resistance to slag attack test ladle method
TS 6335 Fluorite-Ceramic and glass used in construction
TS 6335 Fluorite-Ceramic and glass used in construction
TS EN ISO 6414 Technical drawing for glassware
TS 6500 Crystal glass
TS 6500 / T1 Crystal glass
TS ISO 6676 Florspar for acid and ceramic production - Determination of total phosphorus content - Reduced molybdophosphate - Spectrometric method
TS 6678 Basic refractory casting materials-Sample preparation by casting
TS 6816 Refractory mortars - Air hardening - Determination of cold bond strength
TS ISO 7884-2 Glass- Viscosity and viscometric fixed points- Part 2: Viscosity determination with rotary viscometers
TS ISO 7884-3 Glass - Viscosity and viscometric fixed points - Part 3: Viscosity determination by fiber elongation based viscometers
TS ISO 7884-4 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by bending glass rod
TS ISO 7884-5 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point with sinking rod viscometer
TS ISO 7884-6 Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point
TS ISO 7884-7 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing and tensile points of rod glasses by bending
TS ISO 7884-8 Glass- Viscosity and viscometric fixed points- Part 8: Determination of the conversion temperature
TS 8044 Basic refractory forging materials - Method of sample preparation by pressing
TS 8045 Plastic and forged refractory materials - Sample preparation method for pressing and drying
TS 8051 Porcelain and white fired ceramic materials - Determination of compressive strength in cold
TS 8198 Florspar - used for acid production - Determination of carbonate - Titrimetric method
TS 8199 Florspar - used in acid production - Determination of total phosphorus - Molybdophosphate photometric method
tst 8199 Florspar- used in acid production- Determination of total phosphorus- Molybdophosphate photometric method
TS ISO 8391-2 Ceramic cooking utensils-Contact with food-Released lead and cadmium-Part 2: Permissibility limits
TS ISO 8424 Raw optical glass -25 resistance to the effect of aqueous acidic solutions in ° C-Test method and classification
TS 8470 Alcoholic beverages - used for commercial purposes - Volume marking rules
TS 8542 Magnesite-Refractory industry
TS ISO 8656-1 Refractory products - Raw materials and unformed products - Sampling - Part 1: Sampling plan
TS EN ISO 8894-1 Refractory products- Determination of thermal conductivity - Part 1: Hot-wire method (upright and resistant thermometer)
TS EN ISO 8895 Shaped refractory insulation products - Determination of resistance to cold fragmentation
TS 8977 Glass-Viscosity and viscometric fixed points-Chapter 1: Determination principles of viscosity and viscometric fixed points
TS ISO 9061 Fluorite (florspar) used in the production of acid and ceramic - Determination of iron content - 1,10- Phenanthroline spectrometric method
TS ISO 9062 Fluorite (florspar) - Determination of manganese content used in the production of acid and ceramic - Periodod spectrometric method
TS ISO 9205 Refractory bricks - Used in rotary kilns - Marking defining hot face
TS 9321 Refractories - Magnesite and dolomite based - Boron determination spectrographic method
TS 9323 Refractories-Carbon and carbon-ceramic materials-Chemical analysis methods-Titanium dioxide determination spectrophotometric method
TS 9324 Refractories-Based on carbon and carbon ceramics-Chemical analysis methods-R2 o3 determination
TS ISO 9385 Glass and glass ceramics - Knoop hardness test
TS ISO 9385 Glass and glass ceramics - Knoop hardness test
TS ISO 9504 Fluorite-Metallurgical purity-Determination of antimony content in extract solution-Atomic absorption spectrometric method
TS29 Potassium nitrate-used in glass manufacturing
TS ISO80 Refractory products - Densely shaped, acid resistant products - Classification
TS EN ISO81-1 Classification of densely shaped refractory products - Part 1: Alumina - Silica
TS EN ISO81-2 Classification of densely shaped refractory products - Part 2: Basic products with less residual carbon than 7%
TS EN ISO81-3 Classification of densely shaped refractory products - Part 3: Basic products with residual carbon content 7% - 50%
TS 10122 Cutting machine - for tiles and ceramics
TS ISO 10136-1 Glass and glassware - Analysis of extract solutions - Part 1: Determination of silicon dioxide by molecular absorption spectrometry
TS ISO 10136-2 Glass and glassware - Analysis of extract solutions - Part 2: Determination of sodium dioxide and potassium oxide by flame spectrometric methods
TS ISO 10136-3 Glass and glassware - Analysis of extract solutions - Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry
TS ISO 10136-4 Glass and glassware - Analysis of extract solutions - Part 4: Determination of aluminum oxide by molecular absorption spectrometry
TS ISO 10136-5 Glass and glassware - Analysis of extract solutions - Part 5: Determination of iron (III) oxide by molecular absorption and flame atomic absorption spectrometry
TS ISO 10136-6 Glass and glassware - Analysis of extract solutions - Part 6: Determination of boron (III) oxide by molecular absorption spectrometry
TS30 Sodium nitrate - used in glass manufacturing
TS43 Talk-Used in ceramics industry
TS ISO 10345-1 Glass- Stress- Determination of optical coefficient- Part 1: Tensile test
TS ISO 10345-2 Glass- Stress- Determination of optical coefficient- Part 2: Bending test
TS EN ISO 10545-9 Ceramic tiles - Part 9: Determination of heat shock resistance
TS EN ISO 10545-11 Ceramic tiles - Part 11: Glazed tiles - Determination of crack strength of glaze
TS EN ISO 10545-15 Ceramic tiles - Part 15: Determination of extracted lead and cadmium from glazed tiles
TS ISO 10629 Optical glass - Raw - resistance to the effect of aqueous alkaline solutions in 50 c - Test method and classification
TS 10720 Dolomite - used in glass industry
TS 10850 Porcelain tableware
TS 10968 Refractory bricks - Used in glass melting furnaces - Classification and dimensions
TS 10969 Refractory bricks-Used in ladles-Classification and dimensions
TS 11134 Quartzite - used in refractory industry
TS 11136 Bentonite - used in the ceramics industry
TS 11141 Glasses - Greenhouse glass
TS EN ISO 10545-15 Ceramic tiles - Part 15: Determination of extracted lead and cadmium from glazed tiles
TS ISO 10629 Optical glass - Raw - resistance to the effect of aqueous alkaline solutions in 50 c - Test method and classification
TS 10720 Dolomite - used in glass industry
TS 10850 Porcelain tableware
TS 10968 Refractory bricks - Used in glass melting furnaces - Classification and dimensions
TS 10969 Refractory bricks-Used in ladles-Classification and dimensions
TS 11134 Quartzite - used in refractory industry
TS 11136 Bentonite - used in the ceramics industry
TS 11141 Glasses - Greenhouse glass
TS EN 12600 Glass - Used in buildings - Pendulum test - Impact test and classification for flat glass
TS EN ISO 12676 Refractory products - Determination of resistance to carbon monoxide
TS ISO 12678-1 Refractory products-Measurement of dimensions and external defects of refralter bricks-Part 1: Dimensions and conformity to drawings
TS ISO 12678-2 Refractory products-Measurement of dimensions and external defects of refractory bricks-Section 2-Corner and edge defects and other surface defects
TS 12696 Refractory Products - Dolomite Refractory Bricks - General Purpose
TS 12697 Refractory Products - Magnesia Carbon Bricks
TS 12704 Refractory Products - Sintered dolomite (doloma)
TS ISO 12775 Glass - Guide for commonly produced glass types and test methods
TS 12778 Refractory mortars - Air hardening
TS EN 12788 Advanced technology ceramics - Ceramic composites - Mechanical properties in high temperature and inert atmosphere - Determination of flexural strength
TS ISO 12844 Optical glass - Raw - Abrasability with diamond parts - Test method and classification
TS EN 12898 Glass - Used in buildings - Determination of spreading coefficient
TS ENV 12923-2 Advanced technology ceramics - Monolithic ceramics - Part 2: Oxidation test
TS 12986 Refractory mortars
TS EN 13035-1 Machinery and plants for the production and processing of flat glass - Safety requirements - Part 11: Drilling machines
TS EN 13035-4 + A1 Machinery and installations for the manufacture, processing and processing of flat glass - Safety regulations - Part 4: Tilting / lifting tables
TS EN 13035-2 Machinery and installations for the manufacture, heat treatment and processing of flat glass - Safety regulations - Part 2: Off-site storage, transport and transport equipment
TS EN 13035-5 + A1 Machinery and installations for the production and processing of flat glass - Safety rules - Part 5: Stacking machines and unloading machines and installations
TS EN 13035-6 + A1 Machinery and plants for the production and processing of flat glass - Safety requirements - Part 6: Chamfering machines
TS EN 13035-7 + A1 Machinery and installations for the processing and processing of flat glass - Safety rules - Part 7: Cutting machines for laminated glass
TS EN 13035-9 + A1 Machinery and plants for the production and processing of flat glass - Safety regulations - Part 9: Washing plants
TS EN 13042-2 + A1 Machinery and plants for the production and processing of hollow glass - Safety regulations - Part 2 - Handling machines for feeding
TS EN 13042-3 + A1 Machinery and plants for the production and processing of hollow glass - Safety features - Part 3.work machines
TS EN 13042-5 + A1 Machinery and plants for the production and processing of hollow glass - Safety regulations - Part 5 - Presses
TS EN 13042-1 + A1 Machinery and plants for the production and processing of hollow glass - Safety features - Part 1
TS EN 13102 + A1 Ceramic machines - Safety - Loading and unloading of clay tiles
TS 13308 Tableware - Glass
TS 13308 / T1 Tableware - Glass
TS EN 13367 + A1 / AC Ceramic machines - Safety - Transmission and trolleys
TS EN 13367 + A1 Ceramic machines - Safety - Transmission and trolleys
TS 13433 Glass - Used in buildings - Code of practice for safety related to human impact
TS EN 14072 Glass - Used in furniture - Test methods
TS EN 14178-1 Glass - Used in structures - Basic alkaline earth silicate glass products - Part 1: Float glass
TS EN 14179-2 Glass - Used in buildings - Thermally tempered and heat-treated soda lime silicate safety glass - Part 2: Conformity assessment / product standard
TS EN 14186 Advanced technology ceramics - Ceramic composites - Mechanical properties at room temperature - Determination of elastic properties by ultrasonic method
TS ENV 14226 Advanced technology ceramics - Ceramic powders - Test methods - Determination of calcium, magnesium, iron and aluminum in silicon nitride - Flame atomic absorption spectrometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-Aes) method
TS EN 14232 High-end ceramics - Terms, descriptions and abbreviations
TS ENV 14273 Advanced technology ceramics - Ceramic powders - Determination of crystalline phases in zirconium oxide
TS EN 14449 Glass - Used in buildings - Laminated glass and laminated safety glass - Conformity assessment / product standard
TS EN 14945 Refractory products and materials - Spectrometric determination of chromium (vi) in chromium-containing refractories before and after use
TS EN 15158 Advanced technology ceramics - High temperature mechanical properties of ceramic composites in inert media - Determination of fatigue properties at constant amplitude
TS EN 15434 + A1 Glass - Product standard for structural and / or ultraviolet radiation-resistant sealing material (for use in structural sealing glazing and / or sealing glass units exposed to the environment)
TS EN 15998: 2010 Glass - Used in buildings - Safety during fire, fire resistance - Methodology for testing glass for classification purposes
TS EN ISO 16282 Test methods for densely shaped refractory products - Determination of abrasion resistance at ambient temperature
TS EN ISO 20565-2 Chemical analysis of chromium-containing refractory products and chromium-containing raw materials (alternative method to x-ray fluorescence) - Part 2: Wet chemical analysis
TS EN ISO 20565-1 Chemical analysis of chromium-containing refractory products and chromium-containing raw materials (alternative method to x-ray fluorescence) - Part 1: Device, reagents, dissolution and gravimetric determination of silica
TS EN ISO 20565-3 Chemical analysis of chromium-containing refractory products and chromium-containing raw materials (alternative method to the x-ray fluorescence method)
TS EN ISO 21068-2 Chemical analysis of silicon carbide containing raw materials and refractory products - Part 2: Loss of glow, determination of total carbon, free carbon and silicon carbide, total and free silicon dioxide and total and free silicon
Determination of boron (ii) oxide in refractory products - Part 21078: Determination of total boron (ii) oxide in ceramic, glass and glazed metals
TS EN ISO 21078-2 Determination of boron trioxide in refractory products-Part 2: Determination of boron trioxide in binder components by acid extraction method
TS EN ISO 21078-2 Determination of boron trioxide in refractory products-Part 2: Determination of boron trioxide in binder components by acid extraction method
TS EN ISO 21079-1 Chemical analysis of refractories containing alumina, zirconia and silicon dioxide - Refractories containing 5-45% zro (index 2) (alternative method to x-ray fluorescence method)
TS EN ISO 21587-2 Chemical analysis of aluminacilica refractory products (alternative method to x-ray fluorescence method) - Part 2: Wet method
TS EN ISO 26845 Chemical analysis of refractory materials - Wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - Aes) methods