Periodic Controls of Construction Machinery

Generator Periodic Inspection and Inspection

Generators are machines that provide electric current. Generators, which are used especially against electricity outages in workplaces, are also used in residential buildings for the same purpose. The equipment that makes up the generator ensures that the battery is recharged when discharged and maintenance work is performed in case of charging. These equipment also provide convenient current sources and transport of electrical charge.

The operating principle of the generator is based on the conductor moving in the right and left directions in an area where the induction current flows. The magnetic field around the conductor rotates clockwise. Efficiency is provided by the induction current on the conductor. There are two factors that affect the conductor: the strength of the magnetic field and the speed of the conductor in the magnetic field.

First generator by Faraday in 1831 ütaught theşTruck. Today, generators, which are among the indispensables of daily life, play a very important role in the generation of electrical energy.

Since the generators, which have many varieties in themselves, are the machines that generate electric current as a result, necessary precautions should be taken and their regular controls should be done in a timely manner in order not to create danger and to work safely.

The Regulation on Health and Safety Conditions in the Use of Work Equipment describes the minimum requirements for the health and safety of all work machines and equipment used in the workplace. In accordance with the regulations, the compressors must be checked and inspected regularly by authorized mechanical engineers, machine technicians or high technicians at least once a year.

Our company regularly checks and inspects generatorsis in compliance with the standards and test methods published by the domestic and foreign institutions. Here are a few standards that are based on this:

TS HD 60364-5-551 / A11 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment - Group 55: Other equipment - Part 551: Low voltage generator sets
TS ISO 8528-3 Alternating current generator sets driven by reciprocating internal combustion engines - Part 3: Alternating current generators for generator sets
TS ISO 8528-4 ... Section 4: Control and attachment
TS ISO 8528-5 ... Section 5: Generator sets
TS 12650 Authorized services - Generators driven by internal combustion engines - Rules

Compressor Periodic Inspection and Inspection

Compressors are machines used to obtain compressed air. If a certain volume of gas is compressed to a smaller volume, the pressure of the gas begins to increase. The potential energy of the compressed gas affects the container in which the gas is contained in all directions as pressure. Compressed air flowing in a pipe converts some of its pressure energy into motion in one direction. In other words, the potential energy of the air is transformed into kinetic energy. If the velocity of the flowing air increases, the pressure decreases and if the velocity decreases, the pressure increases. This feature of compressed air is the basis of compressor systems. Compressor provides energy to air with this work on air.

The volume of air driven by the compressor over a certain period of time indicates the capacity of the compressor. The flow rate in the outlet pipe of the compressor is equal to the compressor capacity. If the speed of the air flowing in the compressor increases, the capacity of the compressor increases. Since the compressors compress the air, the volume of the air entering the compressor is always greater than the volume of the exiting air.

According to the characteristics of the work, compressors are divided into two main groups as piston or turbo. There are many varieties in itself. However, due to the pressure characteristics of the compressors, necessary precautions must be taken and their regular controls should be done in a timely manner in order to prevent them from being dangerous and to work safely.

Periodic control and inspection of compressorsis in compliance with the standards and test methods published by the domestic and foreign institutions. Here are a few standards that are based on this:

TS 9531 ISO 3857-3 Compressors, pneumatic tools and machines - Terms - Part 3: Pneumatic tools and machines

TS ISO 5389 Turbocompressors - Performance test principles
TS EN 1012-2 + A1 Compressors and vacuum pumps - Safety rules - Part 2: Vacuum pumps
TS EN 13771-2 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units

Periodic Inspection and Inspection of Drilling Machine

Drilling is a hole drilled deep into the soil. A drilling machine is used for drilling purposes for various purposes. Simple drilling machines are mounted on a skid or truck. In large drilling systems, the functions carried out by the individual machines are combined in the drilling machines and made possible by a single machine. Drilling rigs are generally used for surveying or researching mineral and water resources. Drilling rigs are divided into various groups according to their main functions as drilling method, such as rotary drilling machines, impact drilling machines or combined working drilling machines. In addition, drilling machines are divided into groups such as slide drilling machines, special purpose drilling machines and superimposed drilling machines according to their mounting conditions.

Drilling works are generally carried out with the aim of taking samples from soil or rock, measuring groundwater levels, performing pressure water testing, penetration testing or standard penetration tests, or measuring well deviations.

The necessary precautions should be taken for the safe and dangerous operation of the drilling machines and periodic inspections should be carried out on time.

The minimum requirements for the health and safety of work machines and equipment used in workplaces are included in the Regulation on Health and Safety in the Use of Work Equipment. According to the regulations, the drilling machines should be inspected and inspected at least once a year on a regular basis.

Our company periodically controls and inspections of drilling machinesis in compliance with the standards and test methods published by the domestic and foreign institutions. Here are a few standards that are based on this:

TS EN 16228-1 Drilling and basic equipment - Safety - Part 1: General rules
TS EN 16228-2 Drilling and basic equipment - Safety - Part 2: Mobile drilling rigs for geotechnical engineering, mining and mining
TS EN 16228-3 Drilling and basic equipment - Safety - Section 3: Horizontal directional drilling equipment (YYS)
TS EN 16228-4 Drilling and basic equipment - Safety - Part 4: Basic equipment
TS EN 16228-7 Drilling and basic equipment - Safety - Section 7: Interchangeable auxiliary equipment

Cylinder Periodic Inspection and Inspection

In general, the rollers are the construction machines for the compaction of base materials or asphalt mixture materials in construction. Therefore, it is mainly used in construction works and road and dam construction. The cylinders are divided into two groups according to the characteristics of their work. Some rollers are grouped according to the compression systems, while some rollers are grouped according to the movement systems. According to the clamping systems, the rollers are available with rubber wheel compression, vibratory compression, oscillating compression or static compression. According to the motion systems, the cylinders are available with static drum, combined drum, flat drum, goat foot drum or rubber wheel.

Rubber rollers have rubber rollers in front of and behind them and are mainly used for asphalt compaction. In the combined compactor rollers, the cylinder and rubber wheels are together. These machines are also used as road rollers for compaction.

The basic operating system of the cylinders is to combine the materials and to eliminate the air between them. In order to use it effectively, the operator must perform the necessary checks before starting work. It is also an important danger that you need to be very careful when it should be used in public areas. In this respect, necessary precautions should be taken for the cylinders to operate safely and without danger and their regular checks should be carried out on time. In addition, operators need to be competent and experienced.

The minimum requirements for the health and safety of all work machines and equipment used in the workplace are described in the Regulation on Health and Safety in the Use of Work Equipment. According to the regulations, the cylinders must be checked and inspected regularly at least once a year.

Our company regularly checks and inspects the cylinders within the scope of regular controls of construction machinery.is in compliance with the standards and test methods published by the domestic and foreign institutions. Here are a few standards that are based on this:

TS 12205 Road rollers
TS 10203 Construction and digging - Road rollers, roller and tire wetting systems
TS 10204 Construction and excavation machinery - Road rollers - Vibration systems
TS 12188 Road rollers - Steel rollers
TS 12189 Road rollers scrapers

Dump Truck Periodic Inspection and Inspection

In trucks and large vehicles carrying heavy loads, the equipment used to lift the chassis behind the truck and to keep the weight of the truck in balance is called a damper. However, when it is generally referred to as a tipper, the trucks that carry heavy loads and can be lifted come to mind. Dump trucks are widely used in Bilhasa construction and construction sector. The case is very convenient to transport and easily unload sand and heavy construction materials.

Dump trucks have a wide variety of types, depending on the area to be used. For example, on-road dampers are preferred in road construction and excavation works. Their length reaches 7 meters. Giant dampers are preferred for the transportation of heavy and solid materials such as rock and stone. Their width is close to 3,5 meters and their length is close to 9 meters. In general, bathtub type dampers are used to transport materials such as sand, chippings and asphalt. Their length reaches 8 meters.

Measures should be taken to prevent the opening of the tipper and the periodic inspections of the tipper trucks. The most common accident in dump trucks is the opening of the damper while the vehicle is in motion. In order to avoid these accidents, dump trucks must have safety systems to prevent rear opening of the case during movement.

The minimum requirements for the health and safety of work machines and equipment used in workplaces are included in the Regulation on Health and Safety in the Use of Work Equipment. According to the regulations, dump trucks should be inspected and inspected at least once a year on a regular basis.

Our company regularly inspects and inspects dump trucks within the scope of regular controls of construction machinery.is in compliance with the standards and test methods published by the domestic and foreign institutions. Here are a few standards that are based on this:

TS EN 474-6 + A1 Construction and digging machines - Safety - Part 6: Specification for tipper trucks
TS ISO 7132 Earthmoving machinery - Tipper - Terminology and commercial properties
TS ISO 10268 Construction and excavation machines - Speed reducers for tippers and crawler scrapers - Performance tests
TS 3804 Soil digging and transport machinery - Damper frames - Volume determination